RTAF - Air-Cooled Series R (TM) Product Report
RTAF - Air-Cooled Series R (TM) Product Report
RTAF - Air-Cooled Series R (TM) Product Report
Job Information
Job01
General Data
Evaporator Information
Evaporator application Standard cooling Evaporator configuration 2 pass evaporator
Evap fouling factor 0,0176 m2-deg K/kW Flow switch Factory installed 45 cm/s
Leaving fluid evap 7,00 C Saturated evap temp - ckt 1 5,4 C
Entering fluid evap 12,00 C Saturated evap temp - ckt 2 5,8 C
Flow evap 20,94 L/s Min flow evap 9,462 L/s
Fluid pressure drop evap 47,7 kPa Fluid pressure drop min flow 9,87 kPa
Evaporator fluid type Fluid type - water Evap fluid freeze point 0,00 C
Evap fluid concentration --
Condenser Information
Electrical Information
Incoming power line connection Single point unit power Short circuit current rating Default amp rating
Unit voltage 380.V/60.Hz/3 phase Power line connection type Terminal block
Total power 140,5 kW
Compressor power 130,6 kW
Compressor 1A - RLA/AFD input 119,00 A
Compressor 2A - RLA/AFD input 119,00 A
Single point power MCA 305 A
Single point power MOP 400 A
Physical Information
Job Information
Job01
Acoustical Performance
A-weighted 75% sound power 93 dBA A-weighted 75% sound pressure 66 dBA
A-weighted 50% sound power 92 dBA A-weighted 50% sound pressure 64 dBA
A-weighted 25% sound power 89 dBA A-weighted 25% sound pressure 61 dBA
Note: * At 30 feet in free field.
This unit complies with the efficiency requirements of all versions of ASHRAE Standard 90.1 and
CANS/CSA C743.
Certified in accordance with the AHRI Air-Cooled Water-Chilling Packages Certification Program,
which is based on AHRI Standard 550/590 (I-P) and AHRI Standard 551/591 (SI). Certified units
may be found in the AHRI Directory at www.ahridirectory.org.
This product meets the minimum efficiency requirements of ASHRAE Standard 90.1 and CANS/CSA C743
version 2007 (which are based on AHRI standard rating conditions) and, therefore, also meets the LEED
The LEED Green Building Rating System™, developed by the U.S. Green Building Council, provides independent, third-party verification that a