Scribd
Upload
87 views2 pages

Kam CSM: PER API 8.3, ASTM D5854

The document describes a Kam® CSMTM Circulating Sample Mixer. It is used for mixing samples from Kam® sample receivers to ensure homogenous sampling for analysis or transfer. It connects to sample receivers via quick connectors and has a gear pump, static mixer, and sample draw-off valve. Safety guidelines and specifications are provided.

Uploaded by

Saputra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views2 pages

Kam CSM: PER API 8.3, ASTM D5854

The document describes a Kam® CSMTM Circulating Sample Mixer. It is used for mixing samples from Kam® sample receivers to ensure homogenous sampling for analysis or transfer. It connects to sample receivers via quick connectors and has a gear pump, static mixer, and sample draw-off valve. Safety guidelines and specifications are provided.

Uploaded by

Saputra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Kam® CSM™

CIRCULATING SAMPLE MIXER

PER API 8.3, ASTM D5854


Ensuring homogenous sampling ensures
sampling accuracy. The KAM® CSM™
Circulating Sample Mixer easily connects to
all your KAM® Sample Receivers via quick
connect couplings. Then, for the highest
degree of accuracy, it mixes the sample to
full homogeneity for analysis or transfer to
other containers. You can even take samples
directly from the mixer by utilizing the
included draw-off valve.

A P P L I C AT I O N S S P E C I F I C AT I O N S

• Laboratory and field sample mixing Pump: Gear pump - 4 GPM (16 LPM)

• Truck loading, unloading Motor: Explosion proof 1/2 HP;


110/220 VAC, 50/60 Hz
• Marine loading, unloading, lightering
Suction: 3/4” female quick disconnect
• Pipeline • Production • Refinery
Discharge: 1/2” female quick disconnect
K E Y F E AT U R E S
Sample
• User friendly draw-off: 1/4” valve with tubing

K A M ® C S M U S E R G U I D E 0 7 19
connection
• Sample draw-off valve
Dimensions: 23” x 12” x 14”
• Easy to clean (584 mm x 305 mm x 356 mm)

• Gear pump Weight: 70 lbs. (32 kg)

• Quick connect/disconnect

• In-line KAM® SMS™ Static Mixer

• Fully API 8.3 and ASTM D5854 compliant


I

KAM RESERVES THE RIGHT TO MAKE CHANGES TO THIS DOCUMENT WITHOUT NOTICE
Kam® CSM™
CIRCULATING SAMPLE MIXER

Top ½” quick connect/pump discharge


View

Pump Motor

KAM® SMS™ Static Mixing


Spool
Junction Box:
110 or 230 power Sample Draw
with ON/OFF switch ¾” quick connect/pump suction
Off Valve

End View Side View

USER GUIDELINES

• Observe all electrical codes • Wear safety glasses at all times when
using the sample draw off valve K A M ® C S M U S E R G U I D E 0 7 19
• Do not run pump dry
• Follow all procedures outlined in
• Do not turn pump on unless both API MPMS Chapter 8.3
suction and discharge lines are
connected to a KAM® SR™
Sample Receiver via quick connects
KAM CONTROLS is an ISO9001 Certified Company
• Make sure KAM® SR™ lid is closed www.KAM.com
and sealed prior to switching on the T: +1 713 784 0000
KAM® CSM™ pump F: +1 713 784 0001
E: [email protected]
I

You might also like