CURRICULUM VITAE

Bhim Yadav Career Objective:

I would like to put my best effort in learning practical aspects of production
engineering. & I would directly lead to the growth and development of the
company, my aim would be to make a mark in the company with the help of my
hard efforts and toil put in together with patience and passion to do work.

Work Experience:
❖ Total 5.1 years Experience as a QC Engineer & Site Engineer in
Fabrication with Machinning Equipment ,Cross Country Pipe line,Piping,
Shell and Heavy Structural Steels (such as Columns , Beams, Rafters ,
Bracings ,Build up beams ,Plate and pipe supports ,stairs ,ladders , Hand
rails, checker plates, purlins , etc.)
SPECIALIZATION: ❖ Prepare a WPS, WPQ, PQR as per ASME sec IX / AWS D1.1 & Familiar
with ASME Sec V , SecVIII , Sec2A&2C, & IS2026,IS7215,IS9595,IRS
B.E: Mechanical B-2001
Engineering ❖ Presently working : SPML INFRA LIMITED – Ahemdabad, Sep 2018
to till Continue.
CONTACT Designation: QA/QC Engineer
INFORMATION: Current Project Name:
• Design, Construction, Operation and Maintenance of
Name : Yadav Bhim Y. Water Treatment Plant & Clear Water Reservoir at
TPI Portable Water Transmission Main & Master
Mobile: +91 9724942128 Balancing Reservoir (Portable Water) in TP2 DSIR –
+91 8200038138 Dholera Industrial Development Limited.- Cross
E-Mail : Country Pipe Line.
[email protected] • Sauni Phase –II, Link-1,Package-4,Pumping Station at
[email protected] ch. 0.0km ( UND-1 Reservoir) to pipartoda at
m ch.36km.- Jamnagar
CONTACT ADDRESS: 1) Working Location: ESSAR STEEL (I) LTD, Hazira, Surat. Sep 2017 to
Sep 2018
141 , Maruti Nagar Contract : Arihant NDT Inspection services
Near The kailash Nagar Designation:QC Engineer
Chaukari Bamroli Road Completed Project list:
pandesara Surat - 394221
• Railway (Railway Under Ground Bridge-RUB) -
.
DFCCIL
PERSONAL DETAILS:
• JSW Steel Dolvi Plant – L&T MMH
Date of birth: 15/01/1992 • Dr.Narla Tata Rao Thermal Power Station-BGR
Gender : Male Energy Systems Limited from Chennai.
Nationality: Indian • Khargone Super Power Thermal Project - NTPC
Marital Status: Single L&T MMH
Cast: Hindu • Railway ( Railways Over Bridge – ROB) - DFCCIL
• Railway( Foot Over Bridge-FOB) - DFCCIL
LANGUAGES KNOWN: 2) Working Location: JNJ Machines Pvt Ltd, Surat.Jan 2016 to Aug 2017
Designation:QC Engineer
English Project Name :
Hindi • Middle Housing – L&T MHPH Boiler – Hazira Surat.
Gujarati • Lower Housing – L&T MHPH Boiler – Hazira Surat.
• MillBottom – NTPC Khargone/Malwa/Tanda.
HOBBIES: • AirInlet – NTPC Khargone/Malwa/Tand
Reading • Outer Ring & Sroud– L&T Turbine – Hazira Surat.
Travelling • Lime Hydrator – TATA Chemical Mithapur.
Improve my knowledge
 • Thermal Power Project – Elecon – NTPC Gadarwara (M.P)
• Transportation Frame (ITER INDIA )– L&T Heavy Engineering – Hazira Surat.
• Dodsal EPC projects – Atomic Power Plant Kakarapar Gujarat.

3) Working location:ABG Shipbuilding Magdalla Surat. Aug 2014 to Dec 2015.

Contract:Arvind Engineering & Co.
Designation: Production Engineer
Project Name:
• Structure Fabrication( Beam & Square Chut).
• Heat Exchanger ( Shell & Tube type).
• MUW-2 Asset Renew2500 Dia. Sea Water Circulate Tank Details D 109 –
TATA Chemical – Mithapur .

Job Responsbility
• Interpretation of Engineering Drawing.
• Supervising the fabrication sequence and Welding Activities.
• Conducting and participation of pre-inspection meetings with client and Vendors and
formulating the ways of inspection at par with the approved inspection test plan
• Review of Inspection & Test Plan, Material verification, all stages of inspection, Dimensional
inspection, Welding inspection, Final visual & painting inspection.
• Material and welding consumable inspection: - Inspection of raw material as per
procurement order (P.O.) and reviewing of mill test certificate (MTC) and related
procurement documents for traceability and conformance to mechanical /chemical
properties in accordance with applicable Codes & standard. Inspection of filler rods, fluxes
and shielding gases
• Fit-up Inspection: - Inspection of the fit-ups in the in-process stage with respect to visual,
dimensional and orientation compliance as per the approved drawings and specifications.
• Control of welding process as per applicable WPS & PQR requirements. Have been
experienced and well versed with the codes like AWS D1.1, ASME Section IX. Monitoring
and expedition of NDT requirements.
• NDT (Non Destructive Testing):- Experienced in various Non-destructive inspection
techniques in accordance with ASME Sec V like Visual inspection, Ultrasonic inspection,
Radiographic inspection, Radiographic film interpretation, Dye Penetrant inspection,
Magnetic Particle inspection, etc.
• Blasting and painting inspection : - Blasting and painting inspection of various Fabricated
products by using magnetic dry film gauge and calibrating with the approved / standard
DFT gauges during blasting, priming, mid and final coat stages and maintaining the records
for all the stages of inspection.
• Documentation:-Preparation of different types of documentation, inspection formats.
Documentation control certificates & technical data as required by the customer such as
NDT Reports, Final Inspection Reports, Calibration Records, and Welder Performance
Certificates etc. (MTC, Visual/Dimensional Inspection Reports, WPS/PQR/WQRT, NDT
Reports, and Painting Inspection Reports) Ensuring that the expediting guidelines are
followed in quality activities.

Educational Qualification:

DEGREE\EXAMINATI YEAR OF BOARD / UNIVERSITY CGPA GRADE

ON PASSING
B.E.(Mechanical Gujarat technological university
2014 6.61 First
Engineering) Ahemdabad
 H.S.C. 2010 Gujarat Secondary & Higher 63.20% First
Secondary Education Board
S.S.C. 2006 Gujarat Secondary & Higher 81.71% Distinction
Secondary Education Board
Project:
Project Title Modified of Air caster
Advantage Reduce Human Effort and Increase The Production Efficiency
Reduce the Product Operation Cost
Use Shipyard, Automobile Industry, Heavy Manufacturing Industry, etc.

Certifications:
NDT level II:
• UT(Ultrasonic Test)
• PT(Penetrant Test)
• MT(Magnetic Test)
• RT(Radiography Test)
• VT(Visual Test)

IT Skill:
• Autocadd(2016)
• Catia
• MS Excel
• MS Word
• Internet Surffing

I confirm that the information provided by me is true and correct to the best of my knowledge and
belief. I assure you that if I am given a chance to serve in your organization than I will work honestly,
sincerely and enthusiastically towards the achievement of yours organizational goals and objectives.

Bhim Yadav