updated 09/2010

Series 300 Valves

Series 300 Valves

DOROT’S AREAS OF ACTIVITY

WATERWORKS
Dorot’s valves are specially designed to comply with all
the demands of Waterworks systems such as: Pressure
management, Low flow regulation, Leakage prevention,
Pump control, Level control, Surge prevention, Sewage
and Water treatment.

IRRIGATION
Dorot is a leader in Automatic Control valves for
irrigation applications: Drip Irrigation, Greenhouses,
Turf and Landscaping. The innovative state of the art
products are made of a variety of materials such as:
Cast Iron, Ductile Iron, Steel, Stainless Steel, Bronze,
Polyamide and uPVC.

CONSTRUCTION AND INDUSTRY

Dorot offers control applications for high rise buildings
such as: Flow and Pressure regulation, Water hammer
prevention and Reservoir level control.

FIRE PROTECTION
Dorot offers a variety of valves for fire protection
applications with UL Approvals.

FILTRATION AND WATER TREATMENT

Dorot offers a variety of Back Flushing valves for
filtration systems. These valves are made of high
durability materials for water treatment of aggressive
waters.
 Series 300 Valves

CONTENTS

GENERAL INFORMATION 4
Overview 4
Features 4
ENGINEERING DATA 5
Technical Specifications 5
Materials 5
Basic Valve Operating Modes 6
Typical Pressure Reducing Performance Chart 10
Cavitation Data 11
Dimensions & Weights - Models 30/31 12
Headloss Charts - Models 30/31 13
Dimensions & Weights - Model 32 14
Headloss Chart - Model 32 15
Components 16
WATERWORKS CONTROL APPLICATION 17
Electronic and Remote control 17
Pressure Regulating 17
Rate of Flow Regulating 17
Water Level Control 18
Pumping Systems Control and Water Hammer / Surge Protection 19
FIRE FIGHTING APPLICATIONS 20
PILOTS AND ACCESSORIES 21
OTHER DOROT PRODUCTS 23
 Series 300 Valves

GENERAL INFORMATION

Overview
DOROT’S 300 Series, the latest line of state-of-the-art globe type automatic control valves, is designed to withstand even
the most demanding requirements of water system control. The experts at DOROT developed this technically-advanced
line with capabilities, far beyond any other valve on the market.
This Engineering Data guide will asist the reader in the selection of the optimal DOROT Series 300 valve.

Features
Air release nut
Position indicator (optional)

Stainless Steel inserts Suspension hook

Spring Fully supported Diaphragm

Diaphragm discs
Double Chamber disc (optional)
Fully guided stem
Rubber seal
Seal discs

Seat
Stainless Steel internal parts
Centering guide

Drainage bore (optional)

Features of the 300 Series

• The capability to regulate near zero flow, as standard both high hydraulic and mechanical stresses.
on all sizes, completely eliminating the need for a • A standard single-chamber valve, enabling jam-free
special low flow device (throttling plug) or a low flow operation in sensitive regulation conditions. When
bypass valve, while ensuring very low head loss in required, conversion from a single to a double
“fully open” position. chambered valve is easily accomplished through the
• A standard valve model, fit for all control operations. insertion of Dorot’s innovative separation disc, without
A specific pilot(s) provides the required application. the need to remove the valve from the pipeline during
• The flange (face-to-face) dimensions suit ISO the conversion.
Standards. This allows for quick and easy • The valve is supplied with a replaceable seat, made
replacement of old equipment, without the need for of SST, which maintains excellent durability against
additional pipeline modifications. erosion and ensuring a drip-tight seal.
• The valve has an internal floating shaft, allowing for • During the closing procedure, the pace slows down,
no friction or leakage, eliminating the need for shaft preventing any damage that may occur from water
sealing. The unique design of the shaft provides for slam/surge.
easy field maintenance. • The series includes, as an optional feature, a valve
• The valve has a resilient seal disc, guided by an position indicator, attached by a floating connection
almost frictionless centering device. (ball & socket), resulting in smooth movement, with no
• The valve’s body is made of Ductile Iron, withstanding wear or tear on the indicator seal.

4
 Series 300 Valves

ENGINEERING DATA

Technical Specifications
Parameter Standard Optional

Connections
• Flanged ISO 7005 or ANSI B16 • Flanged AS10, JIS B22, ABNT and others
• Threaded BSP or NPT
• Model 30: 0.5 – 16bar
• 0 min. press. with N.O spring assisted opening.
7 – 230 psi
• 0.2 bar / 3 psi min. pressure without a spring
Pressure range
• Models 31, 32: 0.5-25 bar
Note: both options require usage of external higher
7 – 360 psi
closing pressure

Max. Water Temperature • 80ºC / 180ºF • 95ºC / 200ºF

Materials
Part Standard Optional

Cast Steel A-216 WCB

Cast Bronze or Marine Bronze
Body & Cover Ductile Iron GGG50 (ASTM A-536) Cast SST CF8M (316)
Ni Aluminum Bronze
Others

Main Valve Internals SST, Bronze and Coated Steel SST 316, HASTELLOY, SMO, DUPLEX

Spring SST 302 SST 316, INCONNEL

Nylon fabric reinforced EPDM (WRAS and NSF

Diaphragm NBR
approved)

EPDM
Seals NBR (Buna-N)
Viton

FBE RAL 5010

Polyester RAL3000 (fire red)
Coating Polyester RAL 5010 UV protected FBE RAL3000
Rilsan (Nylon)
Halar

SST 304
Control Trim: Fittings and control devices Brass
SST 316

Copper
Control Trim: Tubes Reinforced, heavy-duty Nylon, Polypropylene
SST 316

5
 Series 300 Valves

ENGINEERING DATA

Basic Valve Operating Modes

On-Off Mode
Standard (Single Chamber) Valve Double Chamber Valve (Version D)
Closed Mode: The control pressure (taken from the The double chamber version is created by inserting a
pipeline) is applied by the control device to the control separation disc between the diaphragm and the seal.
chamber (top of the diaphragm). The pipeline pressure This assembly creates a second control chamber below
pushes the seal to open, and the control chamber the diaphragm, permitting for the activation of the valve in
pressure forces the diaphragm to close. Since the low-pressure systems and enabling the activation faster
diaphragm area is larger than the seal area, it has valve response. The response to varying conditions is
greater hydraulic force so the valve remains in the quick, since closure downward movement is not resisted
closed position. by pressure below the diaphragm. The closure pace of
the double chambered valve tends to slow toward the end
of the closure procedure. This feature reduce the danger
of pressure surges in short pipelines.

Closed Mode: The control pressure (taken from the

pipeline or from supplementary pressure source) is
applied to the top of the external diaphragm. The bottom
control chamber drains. The pipeline pressure pushes
the seal to open, but since the diaphragm area is larger
than the seal area it creates greater hydraulic force and
which forces the valve to close thus the valve closes. At
this stage, the bottom chamber should be drained.
Closed Mode
Closed Mode

Open Mode: The control device relieves the pressure

Separation
from the control chamber. The pipeline pressure forces Control Disc
the seal to the “open” position so that the fluid can Device
Separation
Control
pass through theClosed
valve. While the valve is open, outlet
Mode
Device
Disc

pressure is applied to the lower side of the diaphragm,

assisting the opening.

Closed Mode
D chamber - Closed Mode
Open Mode: The control device releases the pressure
from the top control chamber.
D chamber - Closed Mode
The seal assembly is forced to the “open” position by
Open Mode the pipeline pressure, allowing flow through the valve.

Control
Opened Mode Device
Control
Open Mode
Device

D chamber - Open Mode Opened Mode

D chamber - Open Mode

6
C M Y CM MY CY CMY K

C M Y CM MY CY CMY K

Series 300 Valves

ENGINEERING DATA
Modulating Mode
Modulating Mode
General
Modulating Mode
GeneralModulating
Positioning Mode
the seal a short distance (less than 1/4 of the Regulation at high pressures
seat diameter) from the seat, creates friction and turbulence,
Positioning the seal a short distance (less than 1/4 of the difference
General
causingGeneral
energy loss in the fluid passing through the valve.
seat diameter) from the seat, creates friction and turbulence,
The results are:
Positioning the loss
seal in a shortfluid distance (less than 1/4 of the The S-300 has exceptional resistance to damages,
causingPositioning
energy sealthe
the the aand
short passing
distance (lessthrough
than ofthe valve.caused by cavitation conditions. This feature was
1/4 turbulence,
-Reduction
seat diameter)of pressure
from seat, flow
createsrate.friction and
The results
the are:
seat diameter)
-Increase
causing
-Reduction
of
energy
of
inletloss
pressure infrom
pressure. the the seat,
andfluid
flow
creates friction
passing
rate. through andthe valve.certified by extensive tests, carried by an independent
The turbulence,
position
results causing energy loss in the fluid passing
of the seal assembly is dictated by the volume laboratories in US and Europe.
-Increase ofare:
through inlet
thethepressure.
valve.
of control
-Reduction fluid
of in topThe results
control are:
chamber which is determinedThe operation limits, as found in these tests, can be
The position
- ofpressure
Reduction the of seal
pressure
and flow
assembly
and flow
rate.
is dictated by the volume
rate.
by the control
-Increase of device.
inlet pressure. calculated for any specific location- using a simple
of control fluid in of
- Increase the top
inlet control chamber which is determinedcomputer program (supplied on request).
pressure.
The control
position device
of the is
sealoperated
assembly by hand
is (manual
dictated by control),
the volumeby
by the control device.
The position of the seal assembly is dictated by the
electric
of control current
fluid (solenoid
in the valve), or by which
hydraulic pressure For operation conditions that exceed the safe limit- a
The control
volumedevice istop
of control
control
operated chamber
by hand (manual
fluid in the top
is control),
determined by
(pilot
by thevalves,
control hydraulic
device. relays). Allcontrol
can be chamber, which
used in standard special Cavitation-Free valve can be supplied. This
electriciscurrent
determined (solenoid valve),
by the control or by hydraulic pressure version, marked by the suffix “F” (example 30F-3 is a
device.
(single
The chamber) valves as well as bybyin double chamber valves.
(pilotcontrol
valves, device
hydraulic
The control
is operated
device isrelays).
operatedAll
hand
can
handbe
(manual control),
usedcontrol),
(manual in standardby
cavitation-free, 80mm / 3” valve), can operate at any
electric current
(single chamber) (solenoid
valves(solenoid
by electric current valve),
as wellvalve), or by
as in double hydraulic pressure
chamber valves. pressure differential without being ruined by it.
or by hydraulic
(pilot valves, hydraulic relays). All can be used
pressure (pilot valves, hydraulic relays). All can be used in standard
Modulating
(single chamber) mode
in standard valves
in standard
as well as
(single chamber)
(single
in double
valves
chamber)
as well aschamber valves. The internal structure includes a Stainless Steel,
in doublevalves. perforated cylinder, that is connected below the standard
chamber
Modulating valves.in standard (single chamber) valves. seal disc and moving freely inside the seat.
mode
Modulating
Modulating mode mode in standard (single chamber) valves. The valve is assembled to generate “over the seat” flow,
in standard
(single chamber) valves so the water stream enters the cylinder from its external
side and emerges through the internal side. The energy
is dissipated by the high-velocity, turbulent flow through
the exposed holes above the seat (due to varying trim
position).
The pressure recovery, that is the cause of cavitation
damage, happens now inside the cylinder and not
adjacent to the body wall. As the SST material is highly-
resistant to cavitation- it is not damaged.
Closed
Closed
Closed
Closed

Closed Valve
Fully Open
FullyOpen
Fully Open

Fully Open

Cavitation energy
dissipation area

Fully-opened
Regulating
Regulating Valve

Regulating
Regulating

7
 Series 300 Valves

ENGINEERING DATA

2-Way Control Device Regulating Mode: The pilot is set to the required
downstream pressure. The pilot senses when the
The 2-way control device is assembled on a control downstream pressure reaches the required value
circuit, connecting upstream to downstream through the causing passage (b) to equal passage (a) b=a. Now,
control chamber. water that flows through the control loop passes from (a)
There are two restrictors assembled in this circuit: through (b) and into the downstream. The control media
(a) A nozzle or a needle valve, at a fixed opening. in the upper part of the control chamber is now steady,
(b) A modulating device (pilot), whose passage may vary keeping the diaphragm and seal in a fixed position. Any
from complete closure (b=o) to a fully open size change in the downstream pressure will change the
(when b>a). b=a balance. This change adds or drains water from the
The volume of the control media in the chamber is control chamber, thus opening or closing the main valve
determined by the relative passages (a) and (b), or, in until it reaches the balanced regulating position b=a
fact, by the opening of (b), as (a) is fixed. once again.

Closed Mode: Pilot (b) senses a downstream pressure

higher than the set-point and closes passage (b).
Through passage (a) the upstream water flows directly
into the upper part of the control chamber, forcing the
diaphragm to close the valve.

Regulating Valve
Regulating Valve
The 2-way control device provides sensitive, accurate,
and constant modulating, control of the main valve. The
main valve does not fully open, as the control device
Closed Valve prevents total draining of the control chamber.
The 2-way control device is standard in most pressure
Closed Mode
Open Mode: Pilot (b) senses a downstream pressure regulating valves.
lower than the set-point, and fully opens passage (b),
larger than (a). All the water from the upstream flows
through (a) and (b), directly to the downstream, allowing
water from the upper part of the control chamber to
partially drain until the pressure in the chamber equals
the downstream pressure.
Pressure in the upper part of the control chamber is
decreased and the upstream water pressure forces the
seal disc to rise Closed
(opening
Mode
the valve).

Open Mode

Opened Valve
Open Mode

8
.G3-d 3/3/02 11:50 Page 1
C M Y CM MY CY CMY K
Series 300 Valves

ENGINEERING DATA

3-Way
3-Way Control
Control Device
Device Proportional
Proportional Pressure
Pressure Reducer
Reducer
The3-way
The 3-waycontrol
control device
device is
is aa small
smallselector
selectorvalve
valvewhich:
which: Theproportional
The proportionalpressure
pressurereducer
reducerisis a valve
a valve that
that has a control
1. Permits passage of the control media into the has a control chamber permanently connected to the
1.Permits passage of the control media into the main valve chamber permanently connected to the downstream.
main valve control chamber (initiating the “closing” downstream.
control chamber (initiating the "closing" procedure),
procedure), or
This valve must be a double chamber [D] type.
This valve must be a double chamber [D] type.
or2. Permits drainage of the control media from the control The
The balance of
balance of hydraulic forces created
hydraulic forces createdbetween
between the high
2. Permits
chamber drainage of the control
to the atmosphere mediathe
(initiating from the control
“opening” pressure on the small seal area, and the lower
the high pressure on the small seal area, and the downstream
chamber to the
procedure). atmosphere (initiating the "opening" procedure). pressure on the larger diaphragm area, causes
lower downstream pressure on the larger diaphragm a fixed ratio
Some of the 3-way control devices have a third mode as ofarea,
inlet/outlet
causes apressure of of
fixed ratio approximately 3:1. of
inlet/outlet pressure
Some of the 3-way control devices have a third mode as
well, which prevents inflow or outflow from the control approximately 3:1.
well,
chamber, soprevents
which inflow
that the main or outflow
valve remains from the control
fixed when the No
Noother
other control device isis needed.
control device needed.
chamber,
device is so thatmode.
in this the main valve remains fixed when the
device is in this
The 3-way modemode.
is used in on-off valves or when the
This mode is
regulating usedis in
valve on-off
fully open,valves or when
in order thespecific
to obtain regulating
Separation
valve is fully
operating open, inOnce
conditions. orderintoposition,
obtain there
specific
is nooperating
water Disc
flow through
conditions. Oncethe in
control chamber.
position, there is no water flow through
The
the 3-waychamber.
control control circuit may open the main valve
entirely, creating minimum head loss.
The 3-way control device may open the main valve entirely,
The 3-way control device must be used when external
creating minimum head loss.
media (not pipeline water) is used to control the valve,
The 3-way
or when thecontrol device
control mediamust be used
is dirty when external media
or abrasive.
(not pipeline water) is used to control the valve, or when
the control media is abrasive.

Non-Return (Check Valve) Mode

Double Chamber Valve
Flow in the normal direction forces the seal to the "open"
Closed Mode
position, allowing for free flow. When downstream pressure
exceeds upstream pressure, return flow may occur, causing
Closed Valve the seal disc to instantly close as a result of both hydraulic
force and the spring's force.
Closed Mode

Closed Valve

Opened Valve
Open Mode
Regular Flow

Open Mode
Open Valve

9
 Series 300 Valves

ENGINEERING DATA

Typical Pressure Reducing Performance Chart

Typical Pressure Reducing Performance Chart
Actual Site Logging Results
Pressures logged
Pressures loggedatat1 1
100mm
SaughtonDorot 300
Hall under Series
10 0mm CX
DOROT 300Pilot
S eriesControl
CX Pilot Control Minute Intervals
Minute Intervals
Flow
Flowlogged
loggedatat1515Minute
Minute
intervals
intervals
80 9

70 8

7
60

6
Metres

50

Flow Litre/sec
Pressure Metres

Flow Litre/sec
5
40
Pressure

30
3

20
2

10 1

0 0
9.2.2001 10.2.2001 11.2.2001 12.2.2001 13.2.2001 14.2.2001 15.2.2001 16.2.2001

Inlet
Inlet Pressure
Pressure Outlet
Outlet Pressure
Pressure Flow
Flow

Comparison of different
SERIES 300 seal structures
CHARACTERISTIC CURVE
% COMPARISON WITH COMPETITIVE DESIGNS
100

90

80

70

60
Valve opening

50

40

30

20

10
Unstable
Unstable regulation zone
regulation zone

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.6 0.7 0.8 1.0
Kn
Kv

LTPDesign
LTP Design (S-300
(S-300 Valve) *
Valve)* V-Plug
V-Plug U-Plug
U-Plug LTP Design
Flat-Disk plug (S-300 Valve)

** Independent
Independentlaboratory report
laboratory data
report source
data source

10
 Series 300 Valves

ENGINEERING DATA

Cavitation Data
Inlet
Inlet pressure
pressure
psi mwc
360 250
240
340
230
320 220
210
300
200 Noisy
Noisy
280 190 Destructive
Destructive Operating
Operating
Cavitation
Cavitation
260 180
170
240
160
Case II
Case- 2
220 150

140
200 Case-1I
Case
130
180
120
160 110
CaseIII
Case- 3
100
140
90
120 80

100
70 Safe
Safe
60 Operating
Operating
80
50
Conditions
conditions
60 40
30
40
20
20 10 Outlet
Outlet
0 pressure
pressure
10 20 30 40 50 60 70 80 mwc
10 20 30 40 50 60 70 80 90 100 110 psi

Cavitation Chart
Limits of operating conditions

The chart above sets the safe limits for valves that are supposed to operate at a considerable pressure differential.
Such conditions generate noise and possible cavitation damages to the valve body.
How to use the chart:
i. Determine the maximal dynamic pressure that may be applied in the inlet of the valve.
ii. Draw an horizontal line from the pressure scale at the left side of the chart
iii. Find the requested outlet pressure in the pressure scale at the bottom of the chart.
iv. Draw an upward line at this point.
v. The intersection of the two lines defines the cavitation characteristics of the valve operation.
- In the case that it falls in the RED zone (case I)- the valve may be damaged in a fairly short time.
- In the case that it falls in the YELLOW zone (case II)- the valve may generate a noise that exceeds 80db.
- In the case that the intersection is within the GREEN zone (case III)- the valve will perform safely and quietly

General remark: The cavitation and noise data are based on tests done by the Utah State University, US, and Delft Hydraulic Laboratories, Holland.

11
 Series 300 Valves

ENGINEERING DATA

Dimensions & Weights

H
Models 30 (16 bar rated valves) / 31 (25 bar rated valves) AH

Globe Flanged Type

R
Valve Size 40 (11/2”) 50 ( 2”) 65 (21/2”) 80 (3”) 100 (4”) 150 (6”)
h h
mm inch mm inch mm inch mm inch mm inch mm inch
h h
L 230 91/16 230 91/16 292 121/2 310 123/16 350 133/4 480 187/8 L
H 185 75/16 185 75/16 185 75/16 230 91/16 240 97/16 330 13 H TH
h** 140 51/2 140 51/2 140 51/2 170 611/16 180 7 230 9 H TH
AH
W 153 6 170 611/16 170 611/16 200 77/8 235 91/4 330 13
WAH AW
R 82.5 31/4 82.5 31/4 92.5 35/8 100 315/16 110 45/16 142.5 55/8 TR
R AR
Weight Kg/Ibs* 12 / 26 12 / 26 13 / 29 22 / 49 37 / 82 80 / 176
AR TR
Vol.control 0.1 / 0.02 0.1 / 0.02 0.1 / 0.02 0.3 / 0.08 0.7 / 0.2 1.5 / 0.4
R
chamber lit/gal
h h
Valve Size 200 (8”) 250 (10”) 300 (12”) 350 (14”) 400 (16”) L AL
mm inch mm inch mm inch mm inch mm inch L AL
h h
L 600 231/16 730 283/4 850 337/16 H 980 389/16 1100 435/16 TH
H 390 153/8 520 201/2 635 25 635 25 855 335/8 W AW TW
AH
h** 300 1113/16 390 151/4 450 1711H/16 450 1711/16 590 231/4 W THAW TW
W 415 165/16 525 2011/16 610 24 610 24 850 337/16 TR
AR
R 172.5 63/4 205 81/16 230 9 R 272 1011/16 290 117/16 AH AB
Weight Kg/Ibs* 157 / 346 245 / 540 405 / 893 510 / 1124 822 / 1812 TR AB
AR
Vol.control 4.3 / 1.1 9.7 / 2.6 18.6 / 4.9
R
18.6 / 4.9 50 / 13.2
chamber lit/gal L AL TL
Valve Size 450 (18”)h 500 (20”) 600 (24”) 700 (28”) 800 (32”) h
mm inch mm inch mm inch mm inch L mm inch AL TL
L 1200 471/4 1250 493/16 1450 571/16 1650
W 6415/16 1850 727/8 AW TW
TH
H 855 33H5/8 855 335/8 1574 6115/16 1675 6515/16 1675 6515/16
h** 600 235/8 600 235/8 740 291/8WAH860 337/8 860 337/8 AW TW
W 850 337/16 850 337/16 1100 435/16 1100 435/16 1090 4215/16 AB
R 310 12R 3
/16 357.5 141/16 490 195/16 498 195/8 603 23AR 3
/4 TR
Weight Kg/Ibs* 945 / 2083 980 / 2160 1950 / 4299 2070 / 4560 2600 / 5730 AB
Vol.control 50 / 13.2 50 / 13.2 84 / 22.2 84 / 22.2 84 / 22.2
chamber lit/gal
L AL TL
Angle Type Globe Threaded Type
Valve Size 50 (2”) 80 (3”) 100 (4”) 150 (6”) 200 (8”) 250 (10”) Valve Size 40 (11/2”) TH 50 (2”) TH
mm inch W mm inch mm inch mm AW inch mm inch mm inchTW mm inch mm inch
AL 208 83/16 250 913/16 295 111/16 405 16 505 197/8 585 23 TL 215 87/16 215 87/16
AH 240 9 /16 415 16 /16 445 17 /2 570 22 /16 635
7 5 1 7
25 832 323/4 TH 185 75/16 185 75/16
AW 170 611/16 200 77/8 235 91/4 330 13 415 AB 165/16 495 191/2 h 140 5 1/ 2 140 51/2
AR 107 43/16 138 57/16 147 513/16 180 71/16 302 117/8 338 135/16 TW 129 5 129 5
AB 125 415/16 150 57/8 173 613/16 240 97/16 300 1113/16 338 135/16 TR 62 2 3/ 8 62 2 3/8
Weight kg/lbs* 12 / 26 20 / 44 37 / 81 76 / 167 150 / 330 515 / 234 Weight kg/lbs* 7 / 15 7 / 15
* Approximate shipping Weight (PN 25) ** h = Minimal required maintenance space
End Connections (for PN16 or PN25)
ISO 2084, 2441, 5752 ANSI B16, AS2129, JIS B22
Size Selection Table
40 50 65 80 100 150 200 250 300 350 400 450 500 600 700 800
Valve Size
(11/2”) (2”) (21/2”) (3”) (4”) (6”) (8”) (10”) (12”) (14”) (16”) (18”) (20”) (24”) (28”) (32”)
Max. recommended flow rate 25 40 40 90 160 350 620 970 1400 1900 2500 3100 3600 5600 7600 8135
for continuous operation (m3/h)
Max. recommended flow rate 110 180 180 400 700 1600 2800 4300 6200 8400 11000 13660 15800 24700 33500 35840
for continuous operation (Gpm)
Min. recommended flow rate <1m3/h (<5 gpm)
Globe Type
Flow Rate Factor: Kv (Metric) 43 43 43 103 167 407 676 1160 1600 1600 3000 3150 3300 7000 7000 7000
Cv (US) 50 50 50 120 195 475 790 1360 1900 1900 3500 3700 3860 8200 8200 8200
Head Loss Factor K (dimensionless) 2.2 5.4 15.4 6.7 5.6 4.8 5.5 4.5 5 9 3.8 6 5.9 4.2 7.8 13.4
Angle Type
Kv (Metric) 60 60 140 190 460 770 1310 For head Loss of fully open valves use the following equations:
Flow Rate Factor: Cv (US) 70 70 164 222 537 900 1533 H (Bar) = (Q [m /h]) H (Psi) = (Q [gpm]) H=K V
3 2 2 2

Head Loss Factor K (dimensionless) 1.3 2.8 3.3 4.3 4.3 4.2 3.6 Kv Cv 2g

12
 Series 300 Valves

ENGINEERING DATA

Headloss Charts
Models 30/31
MODE(Globe
LS 30 \ 31 (Pattern)
GLOBE PATTEPressure
RN) PRESSURLoss
E LOSSChart
CHART

psi mwc
10

8
10
9
6

0mm

m
8
mm

0m
7 5

0mm

, 50

, 80
, 65
m, 5 , 2 ½"

, 45 ", 20"
300 2", 14"
mm

mm

mm

mm

0mm

0mm
6
m

, 35

, 70 2"
0mm

10"
80m
40m ½", 2"

3"

4"

6"

8"

3
8
100

150

200

250

mm

400 16" ,1

600 ", 28",

5

1
1

mm

mm
3

24
4

3
2

1
10 100 1,000 10,000 m3/hr

100 1,000 10,000 gpm

3w 2w

Models 30A/31A
MODELS 30(Angle
A \ 31A (ANPattern)
GLE PATTERPressure
N) PRESSURE Loss Chart
LOSS CHART

psi mwc
10

8
10
9
6
8
7 5
0 mm
40m ", 2"

mm

mm
m

6
mm
m

4
m, 5

10"
m
3"
80m

4"

6"

8"
200

250
100

150
1½

5
3
4

3
2

1
10 100 1,000 10,000 m3/hr

100 1,000 10,000 gpm

3w 2w

13
 Series 300 Valves

ENGINEERING DATA
h

H
Dimensions & Weights AH
Model 32 (25 bar rated valves)
R
Globe Flanged Type
Valve Size 80 (3”) 100 (4”) 150 (6”) 200 (8”) 250 (10”)
mm inch mm inch mm inch mm inch mm inch L
L 310 123/16 350 133/4 480 187/8 600 235/8 730 283/4
H 185 7 1/4 232 93/16 250 10 334 131/8 395 151/2
h** 107 4 1/4 156 6 1/8 170 6 3 /4 220 811/16 275 1013/16
W 200 7 7/8 235 9 1/4 300 113/4 360 143/16 425 163/4 W AW
R 100 315/16 120 411/16 150 5 7 /8 182 63/16 215 87/16
Weight Kg/Ibs* 15 / 33 27 / 60 51 / 112 92 / 202 171 / 377
Vol.control 0.1 / 0.02 0.3 / 0.08 0.7 / 0.2 1.5 / 0.37 4.3 / 1.1
chamber lit/gal
Valve Size 300 (12”) 350 (14”) 400 (16”) 450 (18”) 500 (20”) 600 (24”)
mm inch mm inch mm inch mm inch mm inch mm inch h
L 850 337/16 980 389/16 1100 435/16 1200 471/4 1250 493/16 1259 499/16
H 545 211/2 635 25 635 25 855 335/8 855 335/8 1311 515/8
h** 400 153/4 480 187/8 480 187/8 600 235/8 600 235/8 245 9 5 /8 H
W 489 191/4 610 24 628 243/4 850 337/16 850 337/16 881 3411/16
R 245 9 3/8 260 103/16 314 123/8 310 123/16 357.5 141/16 459 181/16 AH
Weight Kg/Ibs* 330 / 726 510 / 1124 544 / 1197 945 / 2083 980 / 2160 1030 / 2266
Vol.control 9.7 / 2.6 18.6 / 4.9 18.6 / 4.9 50 / 13.2 50 / 13.2 50 / 13.2 R
chamber lit/gal

h* = minimal required maintenance space

End Connections (for PN16 or PN25) L
ISO 2084, 2441, 5752 ANSI B16, AS2129, JIS B22.

W AW

Size Selection Table

Valve Size 80 (3”) 100 (4”) 150 (6”) 200 (8”) 250 (10”) 300 (12”) 350 (14”) 400 (16”) 450 (18”) 500 (20”) 600 (24”)
Max. recommended flow rate
for continuous operation (m3/h) 60 145 225 510 970 905 1900 2030 3100 3600 3600
Max. recommended flow rate 265 640 990 2250 3990 6200 8400 8940 13660 15860 15860
for continuous operation (Gpm)
Min. recommended flow rate >1 m3/h (>5 GPM)

Kv 43 115 165 345 663 1160 1600 1600 3000 3000 3000
Flow rate factor
Cv 50 133 192 400 770 1360 1900 1900 3500 3500 3500

14
 Series 300 Valves

ENGINEERING DATA

Model 32 (Globe
MODEPattern) Pressure
L 32 (GLOBE PATTERN) PRELoss
SSURE Chart
LOSS CHART

psi mwc
10

8
10

0m m
9
6
8

, 60
"
", 24
7 5

0 mm

0 mm
,16"

, 20
6

, 40

, 50
4

14"

18"
mm

mm
5
m

m
m

mm
m

10"

350

450
m

m
m

12"
4"
80m

8"
3"

6"

3
100

150

200

250

300
4

3
2

1
10 100 1,000 10,000 m3/hr

100 1,000 10,000 gpm

3w 2w

15
 Series 300 Valves

ENGINEERING DATA

Components

Position Ind. Kit

Bolts & Nuts
Lifting Ring

Bonnet Assembly

Spring

Double-Chamber Diaphragm
Conversion Kit Assembly

Body Assembly

‘F’ Version
Conversion Kit

16
 Series 300 Valves

WATERWORKS CONTROL APPLICATION

Electronic and Remote control functions

EL Electrically- activated valve
Controlled by an electric solenoid valve, that initiates opening or closure

EL
of the main valve. The electric control can be added to most other control
applications.

EC Electronically- controlled valve

Activated by the versatile DOROT “ConDor” controller, that enables all
control functions, or combination of functions, at extreme accuracy. Can be
controlled by any pulse- activating controller.

EC
Pressure Regulating functions

PR
PR Pressure Reducing valve
Reduces high upstream pressure to a steady, lower downstream pressure,
regardless of fluctuations in the values of upstream-pressure or rate of flow.
Should downstream pressure exceed the required set point (due to
stoppage of the flow in the pipeline), the valve closes drip tight.
Dorot PR valve is also UL listed, for use in fire fighting systems.
Optional Pressure Reducing applications:

PRM
• PRM(T2) Dual Set-Point, Timer-modulated pressure reducing valve
• PRM(FM) Electronically-Controlled, Flow-Modulated PRV
• PRM(HyMod) Hydraulically-Controlled, Flow-Modulated PRV
• PR(D) Differential Pressure Reducing valve

PS Pressure Sustaining valve

PR(D)
Assembled in the pipeline and modulates to maintain a steady pressure in
the network upstream of its location.
Dorot PS valve is UL listed for use in fire-fighting systems.
Optional Pressure Sustaining applications:
• PS(R) Pressure Sustaining\Relief valve
• DI Differential- sustaining valve
PS

Rate of Flow Regulating functions

FR Flow-rate control valve
Maintains preset, stabilized flow rate in the network regardless of pressure
variations and flow demand.
FR

FE Rupture- protection valve

Normally- open in-line valve. Should the flow Rate exceed a preset point,
due to pipe rupture, the valve closes automatically.

17
 Series 300 Valves

WATERWORKS CONTROL APPLICATION

Water Level Control

FL Water-level control valve- modulating type
Mounted on the tank / reservoir inlet, below or above the water level.
Closes when the water level rises to the float location, preventing overflow,

FL
and opens when the water level drops.

FLDI1 and FLDI2 Water-level control valve- differential type

Mounted on the tank / reservoir inlet, below or above the water level.
It closes when the water rises to the requested maximal level, and opens
when the water level drops to a preset minimal point. The levels difference
is adjustable.

AL Altitude control valve

Mounted on the inlet of the tank / reservoir, below the water level .

FLDI
The valve is activated by the hydrostatic pressure of the water level. It
closes when the water rise to the requested maximal level, and opens fully
when the water level drops to the preset minimal point. The differential
between the water levels is adjustable.

FLEL Electrically- activated level control valve

Mounted on the tank / reservoir inlet, below or above the requested water
level.
Activated by An Electric Float pilot located in the tank / reservoir. It closes
when the water rise to the requested maximal level, and opens fully when
the water level drops to the preset minimal point. The differential between

FLEL
the water levels is adjustable.

AL / PR, FLDI1 / PR, FLDI2 / PR Combination of water level and flow

rate control
Mounted on the tank / reservoir inlet. It limits the flow into the tank, and
maintain the preset maximal and minimal water levels.

AL / PS, FLDI1 / PS, FLDI2 / PS Combination of water level and

back-pressure control
Mounted on the tank / reservoir inlet. It maintains the pressure in the supply
AL

network and the preset maximal and minimal water levels.

18
 Series 300 Valves

WATERWORKS CONTROL APPLICATION

Pumping Systems Control and Water

Hammer / Surge Protection
CV Check valve

NS
The valve is in “open” position when inlet pressure is higher than outlet
pressure.
The valve closes, preventing returning flow, on inverted flow direction.

NS Two-Stages, cushioned closure check valve

Developed to eliminate pressure slam of check valves, frequently found in
roof-tank filling pumps of high-rise buildings. It opens on pump start, and
closes at controlled pace when the pump stops.

BC Pump control valve

Installed on the pump discharge. Eliminating pressure surges caused

BC
by rapid change of the pipe velocity. Opens slowly on the pump startup,
and closes at adjustable pace before shut-off. The pump motor is then
switched-off by an electric interlink with the valve.
Optional Pump Control valve applications:
• BC/PS Pump control and Back-pressure sustaining valve
• BC/CD Pump control valve with extended closure, for long pipelines
• BC/DI Booster pump control, maintains constant flow at varying suction
conditions

DW Deep well control valve

Mounted on a tee junction, on the discharge head of deep well, upstream of

DW
the Check valve. Eliminating pressure surges caused by sudden change of
the pipe velocity through start-up and shut-off.

QR Quick-Relief Safety valve

Mounted on a tee junction in the pipeline, releasing the water out of the
network.
When upstream pressure exceed the safe value- the valve opens instantly,
releasing the pressure surge.

RE Surge-anticipating valve, Hydraulic activation

Mounted on a Tee junction, in a discharge pipe of a pumping station.
QR
Protecting the pumping and the network systems from water hammer,
generated by power failure, by releasing the returning wave from the
system. The valve is activated by the initial low-pressure wave.

RE/EL Surge-anticipating valve, Electric activation

Mounted on a Tee junction, in a discharge pipe of a pumping station.
Protecting the pumping and the network systems from water hammer,
generated by power failure, by releasing the returning wave from the
system. The valve is activated electrically by the power failure event.
RE

SP Surge-preventing closure
A unique DOROT control module, that can be added to any automatic
valve. It prevents water hammer, that is generated by the valve closure,
when it is located at the end of a long pipeline.

19
 Series 300 Valves

FIRE FIGHTING APPLICATIONS

The Dorot 300 series valves are UL-listed to be used in Fire

Protection Systems at various ranges of applications.

Deluge Valves
The Dorot UL Deluge Valves are suitable for systems that include Electric,

DE/EL
Hydraulic or Pneumatic detections. The Dorot 300 series Deluge Valves
are activated by each signal or by combinations thereof. All applications are
equipped with a manual emergency actuation valve and approved for use in
Fire Protection Systems as Automatic Reset or Manual Reset Valves.

Monitor Valves
The Dorot 300 Series Monitor Valves are designed to open immediately
as a response to Electric, Hydraulic, Pneumatic or manual activation. The

U-DE/EL
valves use the line pressure to develop maximum power and do not need
any external source of power.
The Dorot 300 Series Monitor Valves are designed to be activated locally or
remotely.

Pressure Reducing Valves

The Dorot 300 Series UL Pressure Reducing Valves are hydraulically self-
operating Diaphragm Valves that reduce High upstream pressure to Lower

PR/UL
downstream pressure regardless of the upstream pressure fluctuation or
unstable flow demand.
The Dorot 300 Series UL Pressure Reducing Valves are designed to
maintain constant downstream pressure at all flow conditions.

Pressure Relief Valves

The Dorot 300 Series UL Pressure Relief Valves are designed to maintain
constant pressure in the fire Protection System and prevent over
PS/UL

pressure by relieving excess pressure back to the reservoir or vent to the

atmosphere.

Additional information about the Dorot 300 series Fire Protection

applications can be found in the Dorot Fire Protection catalogue.

20
 Series 100 Pilots and Accessories
Plastic Mini Pilots Series 300 Valves
For valve sizes 20mm to 100mm - 3/4" to 4"
Pressure rating: 10 bar / 145 psi
Series 100
29-100 - 3-way pressure reducing pilot valve Pilots and Accessories
PILOTS AND ACCESSORIES
100 Plastic Mini
29-200
For valve
- 3-way
29-300 - 3 way sizes
Pilots
Pilots
Series 100and Accessories
multi purpose (pressure reducing and sustaining) pilot valve
20mm to 100mm
differential
3/4" to 4"
multi- purpose
Pilots and A
Pressure rating: 10 bar / 145 psi
(flow control, differential pressure sustaining)

Pilots and Accessories

29-100 -- 2-way 3-way pressure
pressure reducing
reducing pilot pilot valve
valve 29-410 29-100 29-300 29-200
100 29-410
29-200 - 3-way multi purpose (pressure reducing and sustaining) pilot valve
Mini Pilot-Valves
Plastic Mini Pilots
29-300 - 3 way differential multi purpose 3/4" Pilots
For valve sizes 20mm to 100mm Plastic- Mini to 4"
(flow control, differential pressure3sustaining)
m to 100mm - 3/4" to 4"
ForMetalvalve Pressure rating: 10 bar / 145For psi
valve sizes 20mm to 100mm - 3/4" to 4"
29-410 - sizes
Mini 2-way 20mmreducing
Pilotspressure to 150mm pilot valve- /4” to 6” 29-410 29-100 29-300 29-200
ar / 145 psi Pressure rating: 2529-100
bar
For valve sizes 20mm to 150mm - /4" to 6" -/ 3-way
360 3 psipressure reducing
Pressure pilot
rating: valve
10 bar / 145 psi
ssure reducing pilot 68-410 valvePressure- rating:
2-way 29-200
25Pressure
bar / 360 -psi3-way
reducing multi purpose
pilot29-100 (pressure
valve - 3-way reducing andreducing
pressure sustaining) pilot
pilot valve
valve
mltitopurpose
100mm(pressure
- 3/4" to 68-500
reducing
4"68-410 and-- 2-way
sustaining)
2-way pressure 29-300
Pressure
pilot valve- 3sustaining
reducing way differential
pilot valve pilot multi
29-200 purpose
valve- 3-way multi purpose (pressure reducing and sustaining) pilot valve
erential
ar / 145 multi
psi purpose 68-220
Metal Mini
68-500 -- 2-way Quicksustaining
Pilotspressure
2-way (flow pilot
pressure control,
relief differential
valve pilot valve
29-300 - pressure sustaining)multi purpose
3 way differential
29-410 - 2-way3/4pressure reducing pilot valve 29-410 29-100 29-300 29-200
trol, differential pressure
ssure reducing pilot valve 31-100
For valve -
sustaining) 3-way
sizes 20mm (pressure
to 150mm rating
- " to 16bar
6"
29-110 - 3-way (pressure rating 16bar / 230psi) pressure reducing pilot / 230psi) (flow Multi
control, purpose
valve pressure sustaining) 68-220
differential
29-410 29-100 29-300 29-200 68-500
68-50029-410 68-410
68-410
29-100 29-300
ssure
lti reducing
purpose pilot reducing
(pressure valve and(pressure
Pressure rating: reducing
25 barpilot
sustaining) / 360
valve psi and sustaining) 29-410 - pilot 2-wayvalve pressure reducing pilot valve
erential multi purpose 68-410 - 2-way pressure reducing pilot valve
trol, differential pressureMetal 68-500
sustaining)- 2-way pressure sustaining pilot valve
Pilots Metal Mini Pilots
29-110 - 3-way (pressure rating 16bar 1/2"/to 230psi)
29-410 pressure 3/4reducing pilot valve
29-100 29-300 29-200
Pilot-Valves
ssure reducing pilot valve For valve sizes 40mmFor
m to 150mm - 3/4" to 6"Pressure rating: 25 bar
to valve
600mm
Pressure
/ 360 psi
sizes- 120mm
rating: 25 bar / 360
to
24"150mm
Metal -Mini
Forpsi
"Pilots
to 6"
valve sizes 20mm to 150mm - 3/4" to 6"
68-500 68-410

ar / 360 psi ForCXPR valve

- sizes 40mm
2-way pressure 68-410 to- 600mm
reducing 2-way pilot - 11reducing
pressure
valve /Pressure
2
” to 24” pilot valve
rating: 25 bar / 360 psi
ssure reducing pilot Pressure valveMetal Pilots rating: 25
(CXRS - remote bar
68-500 -/ 360
sensing,2-way psi
CXRD pressure sustaining
differential
68-410pressure pilotreducing)
- 2-way valve
pressure reducing pilot valve
CXPR For valve sizes 40mm to 600mm - 11pilot " tovalve
24"
/2(pressure
mssure sustaining
to 150mm - 3/4pilot
" to 6"CXPS -- 2-way
valve 2-way Pressure
29-110
pressure - reducing
3-way
sustaining pilot valve
rating
68-500 16bar
- 2-way / 230psi)
pressurepressure reducing
sustaining pilotpilot
valvevalve 68-500 68-410
essure rating 16bar / Pressure
230psi) rating:
(CXRS
pressure (CXSD 25differential
- bar
reducing /pilot
remote360 valve
psisensing,
pressure CXRD
sustaining) 29-110 differential
- 3-way (pressure rating 16bar / 230psi) pressure reducing pilot valve
ar / 360 psi 68-500 68-410 68-500
CXPR -
31-310 -pressure2-way pressure
3-way multi reducing
reducing) pilot valve
purpose (pressure reducing and sustaining) pilot valve
ssure reducing pilot valve
CXPS 76-200 - 2-way
- (CXRS
3 way - remote sensing,
Pressure
differential multi CXRD differential
sustaining
purpose pilot valve pressure reducing)
ssure sustaining pilot valve Metal Pilots
CXPS - (CXSD 2-waycontrol,
(flow pressure sustaining
differential
differential pilot valve
pressure
pressure sustaining)
sustaining)
essure rating 16bar / 230psi) pressure reducing Forpilot
valvevalve
sizes 40mm to 600mm Metal Pilots- 11/2" to 24"
31-310
68-600 (CXSDpressure
-- 3-way
2-way differential
Multi purposepressure
reducing pilotsustaining)
(pressure
valve reducing and 68-500 68-410
m to 600mm - 1 /2" to 24" 1 Pressure rating: 25 bar / 360 Forpsivalve sizes 40mm to 600mm - 11/2" to 24"
31-310 --sustaining)
68-700 3-way pressure
2-way multi purpose
pilot (pressure
valve
sustaining pilot reducing
valve and sustaining) pilot valve 68-600/68-700 31-310 CXPR CXPS
bar / 360 psi CXPR - 2-way pressure reducing pilot valve
Pressure rating: 25 bar / 360 psi
76-200
76-200-- 33way Differential
way differential multimulti
purposepurpose
(CXRS - remote sensing,
ssure reducing pilot valve CXPR - CXRD 2-waydifferential pressurepilot
pressure reducing reducing)
valve
(flow
(flow control,
CXPS -differential
control, differential pressure
2-way pressure pressure
sustaining)sustaining)
sustaining (CXRS pilot valve
emote
m to 600mmsensing,- CXRD todifferential
11/2"68-41M 24" pressure reducing) - remote sensing, CXRD differential pressure reducing)
68-600 -- 2-way, Pneumatically
2-way pressure reducing pilotmodulated,valve pressure
ssure sustaining
bar / 360 psi pilot High
valve Sensitivity Metal Pilots (CXSD differential CXPS pressure
- sustaining)
2-way pressure sustaining pilot valve
68-41M 31-310 CXPR CXPS
68-700 - 2-way pressure sustaining pilot valve 68-600/68-700 31-310 CXPR CXPS
ferential pressure
ssure reducing pilot For valvereducing
sustaining)
valve sizes 40mm31-310 pilot
to 600mm -valve - 11/2multi
3-way purpose (pressure
" to 24" (CXSD reducing and sustaining)
differential pilot valve
pressure sustaining)
ulti
emote purpose (pressure
sensing, CXRDreducing Pressureand
differential rating:
sustaining)
pressure 76-200
25 reducing)
bar /pilot -psi3 way differential
360valve multi-purpose
31-310 3-way multi purpose (pressure reducing and sustaining) pilot valve
erential multi purpose
ssure sustaining pilot valve 70-410 - 2-way differential (flow
pressure control,
reducing differential
mini
76-200 pilot - pressure
valve
3 way(flowsustaining)
control and
differential multialtitude
purposecontrol)
trol, differential pressure High
76-600 Sensitivity
-
sustaining) 2-way Metal Pilots
68-600
differential - 2-way
pressure pressure
reducing reducing
pilot valve pilot
(flow valve
control
control, and altitude
differential control) sustaining)
pressure
ferential pressure sustaining)
ssure
ulti
ssure
reducing
purpose (pressure
sustaining
High Sensitivity Pilot-Valves
pilot valve
pilot
For valve
70-110
reducing
valve
- sizes
and
Pressure rating:
40mm
3sustaining)
way to 600mm
68-700
differential
25 barwith
sustaining)
- 2-way
multi
pilot valve
/ 360adjustable
psi
11/2pressure
-purpose " to (flow
24" sustaining
differential
68-600/68-700
68-600
68-700 -
pilot valve
control,- altitude
2-way
2-way
control and
pressure
31-310
pressure
differential
reducing
sustaining
pressure
pilot valve
CXPR
pilot valve
68-600/68-700
CXPS
31-310
68-600/68-700
CXPR
31-310
CXPS
CXPR
erential multi purpose 70-410 70-110 76-610
For70-410
valve - sizes
2-way differential
40mm to pressure
600mm reducing
- 11mini
/2” to pilot24” valve (flow control and altitude control)
trol, differential pressure sustaining)
76-600 - rating:
Pressure 2-way differential
25 bar pressure
/ 360 psi reducing pilot valve (flow control and altitude control)
ssure reducing pilot valve High Sensitivity Metal Pilots
70-110 -- 2-way
70-410 3 way differential
Differential multi pressure
purpose (flowreducing control, 1altitude control
pilot and differential pressure
etal
ssurePilots
sustaining pilot valve For valve sizes 40mm to 600mm
68-600/68-700 - 1 /2"mini
High Sensitivity to 24" valve
Metal Pilots
31-310 CXPR CXPS
Float Pilots sustaining)
(flow control withandadjustable
altitude differential
control) 70-410 70-110 76-610
m to 600mm - 1 /2" to 24"1 Pressure rating: 25 bar / 360 Forpsivalve sizes 40mm to 600mm - 11/2" to 24"
70-110
For valve - 3sizesway 40mmDifferential
to 600mm
70-410 - multi
-
2-way1 1/2 " purpose
to 24"
differential (flowreducing
pressure control, mini altitude
pilot valve (flow control and altitude control) 70-400
ar / 360 psi Pressure rating: 25 bar / 360 psi
Pressure control
rating: and
25(flow
bar differential
/ control
360
76-600 -psi2-way pressure
differential sustaining)
pressure reducing with
pilot valve (flow control and altitude control)
ferential
etal pressure reducing
Pilots mini pilot valve and altitude 70-410
control) - 2-way differential pressure reducing mini pilot valve (flow control and altitude control)
70-200 - adjustable
Electric float differential
70-110 - 3 way differential multi purpose (flow control, altitude control and differential pressure
ferential pressure
m to 600mm - 1 /2" 31-10H1 reducing
to 24" pilot valve (flow control and altitude control) 76-600 - 2-way differential pressure reducing pilot valve (flow control and altitude control)
-- 3Modulating,
Float Pilots
70-300 way multi purpose
2-way plastic mini-pilot
float
sustaining) pilot
with for (flow control,
irrigation
adjustable altitude
use differential
differential
erential
ar / 360 psi multi purpose (flow control, altitude control and differential 70-110
pressure - 3 way multi purpose (flow control, altitude control and70-30070-410
differential
70-410pressure 70-110
70-110 76-610
For valve sizescontrol40mm
(pressure and differential
to 600mm
rating: 8 bar /- 115 1 1/2psi)
" pressure
to 24" control) 70-400
g) with adjustable
ferential differential
pressure reducing mini pilot valve (flow control and altitude control) sustaining)
70-410 with adjustable70-110differential 76-610 70-410 70-110
Pressure-rating:
70-400 25 bar /2-way
Modulating, 360 psi metal float pilot
ferential pressure reducing pilot valve
70-200-- Horizontal, (flow control and altitude control)
Electric floatdifferential, 3-way metal float pilot
70-610
erential multi purpose (flow 70-300control, altitude control
2-wayand differential pressure
70-550 -- Vertical,
Modulating, plastic
3 and float
4-waypilot forfloat
irrigation
pilot use 70-550 70-200 70-610
Float Pilot-Valves
differential,
Float Pilots metal 70-300
g) with adjustable differential (pressure rating: 8 bar / 115 psi) 70-410 70-110 76-610
For valve sizes 40mm to 600mm Float Pilots- 1 1 /2 " to 24" 70-400
70-400 - Modulating, 2-way metal float pilot1
m to 600mm - 1 /2" to 24" 1 For valve sizes 40mmPressure to 600mm
rating: 25 -
bar 1
/ /
360For” to
psi 24”
valve sizes 40mm to 600mm70-400 1
- 1 /2" to 24" 70-400
70-610 - Horizontal, differential, 3-way metal float 2 pilot
bar / 360 psi Pressure rating: 25 bar -/ 360
70-200 Electricpsi float Pressure rating: 25 bar / 360 psi
Dorot
70-550 - Vertical, differential, 3 and 4-way metal float pilot 70-550 70-200 70-610
oat 70-200 - Electric float 70-300 - Modulating, 2-way 70-200plastic float pilot
- Electric for irrigation use
float
32 70-400 E V E R Y T H I N G I S U N D E R C O N 70-300 T R O L
24" for -irrigation
Modulating, 2-way metal
(pressure float
rating: pilot
8 bar / -115Modulating,
psi)
CONTROL VALVES
ng,to2-way
m 600mm plastic
- 1 1float
/2" topilot use 70-300 2-way plastic
70-400float
70-400 pilot for irrigation use
70-300 70-300
rating:
bar / 360 8 bar
psi / 115 psi) 70-610 - Horizontal, differential,
70-400 - Modulating, 3-way
2-waymetal metal float float pilot
pilot
(pressure rating: 8 bar / 115 psi)
ng, 2-way metal float 70-550
pilot - Vertical, differential,
70-610 - 3
Horizontal, and 4-way
differential,
70-400 metal
3-way
- float
metal
Modulating, pilot
float pilotmetal float pilot
2-way
oat
al, differential,
ng, 2-way plastic 3-way Dorot
metal float
32float pilot for irrigation pilot use
CONTROL VALVES
70-550 E V E R Y T H I N G pilot70-300
- Vertical, differential,
70-610 3 and
- 4-way
Horizontal,metal float
differential, 3-way
I Smetal float U pilot
70-550
N D E R
70-200
C O N T R O L
70-550
70-610
70-200
ifferential,
rating: 8 bar3 /and
1154-way
psi) metal float pilot
70-550 70-200 70-61070-610
70-550 - Vertical, differential, 3 and 4-way metal float pilot 70-550 70-610

ng, 2-way metal float pilot

al, differential, 3-way metal float pilot
ifferential, 3 and 4-way metal float pilot Dorot 70-550
E V E R Y T H I N G
70-200
I S U N D E R
70-610
C O N T R O L
tS E V E R Y T H I N G
32 CONTROL VALVES

32I S
Dorot
U N D E ER V C
E R
O YN TT HR ION L G
CONTROL VALVES I S U N D E R C O

tS E V E R Y T H I N G I S U N D E R C O N T R O L
21
 ‘Galit’
‘Galit’ 3-way
3-way // 22 positions
positions NC
NC or
or NO,
NO, small
small hydraulic
hydraulic relay
relay ‘GALIT’
‘GALIT’ 25-300
25-300

Series Metal
300 Valves
Relays
Metal Relays
Plastic
For Relays40mm to 600mm - 111/2" to 24"
For valve
valve sizes
sizes 40mm to 600mm - 31 /2" to 24"
PILOTS AND ACCESSORIES
For valve
Pressure
sizes 20mm
Pressure rating:
rating:
Pressure rating:
barto// 360
25 bar
25
10/ 2bar
360 psi - /4" to 6"
150mm
psi
/ 145 psiNO (66-213: NC) hydraulic relay
66-210 3-way positions
66-210 3-way / 2 positions NO (66-213: NC) hydraulic relay
25-300 3-way adjustable
66-300 / 2 positions NO w. 3/8" ports hydraulic relay
66-300 3-way
3-way adjustable hydraulic
hydraulic relay
relay
‘Galit’ 2-way
28-200 3-way // 22 positions
positions hydraulic
NC or NO,relay
small hydraulic relay 66-210 ‘GALIT’
66-310 25-300
28-200
28-200 2-way / 2 positions hydraulic relay 66-210 66-310 28-200

Relay-Valves
Mini
Mini Solenoids
Solenoids
For irrigation valve sizes 20mm to 150mm - 33/4" to 6"
For irrigation
Metal Relaysvalve sizes 20mm to 150mm - /4" to 6"
For valve sizes
Pressure
Pressure40mm
rating:
rating: to bar
10
10 600mm
bar // 145
145 psi- 1- 1/12/2” "to
psi 1
24”
For valve
Pressure rating: 25sizes
bar40mm
/ 360to 600mm
psi to 24"
Operating
Operating Voltage:
Voltage:
Pressure
66-210 3-way rating: 25 barNO
/ 2 positions / 360 psi
(66-213: NC) hydraulic relay
AC:
AC: 24V
24V
66-210
66-310 3-way 3-way
adjustable / 2 positions
hydraulic NOrelay
(66-213: NC) hydraulic relay
DC: 12V or 24V
DC: 12V or3-way
24V adjustable hydraulic relay
66-300
28-200 2-way /6-40V
2 positions hydraulic relay
Latch
Latch 6-40V
28-200 2-way / 2 positions hydraulic relay 28-300 66-210
66-210 66-310
66-310 28-200
28-200
28-300 3-way
D2 / 2 positions
D2 2-way NC
2-way NO/NC
NC solenoid
solenoid valve
valvehydraulic relay
D2
D2 D3
D3
D3
D3 3-way
3-way NC
NC or
or NO
NO solenoid
solenoid valve
valve
Heavy-duty
Mini Solenoids
Solenoid Valves
For irrigation valve sizes 20mm to 150mm - 3/4" to 6"
Heavy-duty
Heavy-duty Solenoids
Solenoids
For valve sizes
Pressure20mm
rating: to bar
10 600mm/ 145 psi- 3/34” to 24”
For
For
Pressure rating:
valve
valve
Operating
sizes
sizes
According
20mm
20mm to
Voltage: to 600mm -- 3/4
to600mm /4"" to
the selected to 24"
24"orifice and
Pressure
Pressure rating:
rating: According
According to
to the
the selected
selected orifice
orifice and
and solenoid
solenoid type
type
solenoid type AC: 24V
Operating
Operating Voltage
Voltage (others
(others available
available upon
upon request):
request):
Operating Voltage
DC: 12V or(others
24V available upon request):
AC:
AC: 24V,
24V, 110V
110V or
or 220V
220V
AC: 24V, 110V Latch or 220V
6-40V
DC:
DC: 12V
12V or 24V
or2-way
24V NC solenoid valve
DC: 12V orD2 24V
Latch
Latch 9V,
9V, 12V,
12V, 24V
24VNC or NO solenoid valve D2 D3
Latch 9V, 12V,D3 24V3-way
B2
B2 or NO 2-way
2-way NC
NC oror NO solenoid
solenoid valve
NOvalve valve
B2 2-way NC solenoid
B3 3-way NC or NO solenoid B2 B3
B3 3-way NC B3 or NO 3-way NC or NOvalve
solenoid solenoid valve
valve B2
B2 B3
B3
Heavy-duty Solenoids
For valve sizes 20mm to 600mm - 3/4" to 24"
Control Filters
Pressure
Control rating: According to the selected orifice and solenoid type
Control Filters
Filters
Operating
Self-Flushing,Voltage
Inline (others available
Stainless upon request):
steel screen
screen filter,filter,
locatedlocated
within the
the
Self-Flushing, InlineInline
Self-Flushing, �� Stainless
Stainless steel
steel screen filter, located within
AC:
main24V, 110V
valve, andorrinsed
220Vcontinuously by the stream
within the main valve,
main valve, andandrinsedrinsed continuously
continuously by the streamby the stream
DC: 12V 1 or", 24V
1 "
Sizes: 1/4”, 1Sizes:
/2”, 11/4
Sizes: /4", 1/2
/2"
Latch 9V,
External, 12V,type
"Y" 24V- Stainless steel screen installed in a "Y"
External, “Y” type
External, "Y"- type
Stainless
- Stainlesssteel screen
steel screen installed
installed in a "Y"in a “Y”
B2
shaped 2-way
body on theNCpressure
the or NO solenoid
source. valve
shaped body on body
shaped the pressure
on pressuresource.
source. B2 B3
B3 33/8",3-way NC or NO solenoid valve
/2” /8", 11/2
Sizes: 3/8”, 1Sizes:
Sizes: /2""
External,- Alarge -- A “Y
“Y Filter” FlushingFilter
Self Flushing Filter
External, large
External, large
large A large
volume
large volume external
external filter
volumeexternal filter
filter Filter” Self Flushing Filter

Control Filters
Self-Flushing, Inline � Stainless steel screen filter, located within the
main valve, and rinsed continuously by the stream
Sizes: 1/4", 1/2"

Dorot
External, "Y" type - Stainless steel screen installed in a "Y"
shaped body E source.
on the pressure
CONTROL VALVES
CONTROL VALVES E V E
V E R R Y Y T T H H II N N G
G II S
S U
U N
N D
D E
E R
R C
C O
O N
N T
T R
R O
O L
L
Sizes: 3/8", 1/2"
External, large - A large volume external filter “Y Filter” Self Flushing Filter

Dorot CONTROL VALVES E V E R Y T H I N G I S U N D E R C O N T R O L

22
 Series 300 Valves

OTHER DOROT PRODUCTS

Automatic Control Valves

Model 68 - Diaphragm sealing valve with an Gal Valves - Diaphragm sealing valve.
exceptional robust design. The valve model Waterworks, Agriculture and Waste Water
used primarily for: deluge, pre-action and applications. Extremely simple structure,
dry-pipe fire-fighting systems. This valve single moving part with very low head-loss.
is also used for safety applications such Available in Diameters of:
as quick pressure relief and high-pressure 3/4” (20mm) - 24” (600mm).
(PN25) on-off control in standard water use
as well as corrosive fluids. Glass Reinforced Nylon Valves -
Available in sizes 2” (50mm) – 24” (600mm) Diaphragm sealing valves made of
reinforced Polyamide used in Greenhouses,
Series 500 - Disc seal, Y type valve. Field Crops, Irrigation, Landscaping, Water
This valve is compact, partially made of Treatment (non corrosive). Available in
new composite materials. Wide range of Diameters of: 3/4” (20mm) - 3” (80mm).
flow and pressure regulation. Available in
Diameters of: 1.5” (40mm) - 8” (200mm). Back Flushing Valves -
Specially designed valves for back flow
uPVC Valves - Diaphragm sealing valves flushing of filtration systems. Available in
made of uPVC. For use with aggressive Cast Iron or Glass Reinforced Nylon, Single
water and with underground (PVC) or Double chamber operation.
piping. Available in Diameters of:
3” (80mm) - 6” (150mm).

Mechanical Valves Air Release Valves

Butterfly Valves - Soft sealing Plastic Air Release Valves -
valves (Wafer type) with options Kinetic, Automatic and Combination
of gear, lever (or other) operation. Air Release Valves made of Polypropylene
Available in Diameters of: materials. Available in Diameters of:
2” (50mm) - 24” (600mm). 1” (25mm) - 2” (50mm).

Metalic Air Release Valves -

Kinetic, Combination and Sewage Air
Non Return Valves - Release Valves made of ductile iron, NAB,
Swing check valves, tilting SST or other materials.
disc check valves, double Option for surge arrestor feature. Available
flap check valves. in Diameters of: 2” (50mm) - 12” (300mm).

Water Meters
Gate Valves -
Valves with Water Meters -
resilient or Multi-Jet, Single-Jet,
rigid sealing. Irrigation Meters, Woltman
Meters, Volumetric Meters.

23
 DOROT AUTOMATIC CONTROL VALVES

Founded in 1946, DOROT is a leading developer, manufacturer and marketer of

a wide range of superior quality automatic control valves. DOROT’s experienced
Research & Development Dept. has a long tradition of generating innovative
solutions for the application of water control systems. These include, waterworks
distribution networks, sewage and effluent disposal, fire protection, mining and
irrigation systems.

DOROT’s commitment to excellence begins with using the highest quality

materials. The company’s engineering experts are constantly working to provide
customers with a broad range of valve patterns and sizes in a wide variety of
metals and grades including: Cast Iron, Ductile Iron, Cast Steel, SST, Bronze,
Marine Bronze, Polyamide and P.V.C.

The experts at DOROT custom-design each valve application according to

specific control requirements. Most of the production process, which includes
machining and coating, takes place in modern in-house facilities. Before leaving
the factory, each product is hydraulically tested. An advanced testing laboratory
simulates the anticipated field conditions.

With distribution in more than 70 countries world-wide, a key component of

the DOROT difference is its outstanding customer service. This includes field
assistance, technical advice, training programs and follow-up consultations.

It is all of these factors that make DOROT a leader in fluid control technology and
customer satisfaction.

www.dorot.com • E-mail: [email protected]

www.dorot.com • E-mail: [email protected]