Scribd Logo
Upload

Welcome to Scribd!

  • 67 views

    Cb2420A Battery Charger: Lead Acid: 2.4 Nicd:1.51 Li-Ion: 3.65

    Uploaded by

    Ramius Hamdani
    The CB2420A battery charger provides single phase 115-277V AC input and 24V DC, 20A output for charging open lead acid, sealed lead acid, lead gel, Ni-Cd and Li-ion batteries. It uses switching technology and a 5-stage charging curve (recovery, bulk, absorption, boost, float) for fully automatic and optimized battery charging. It has protections for short circuit, reverse polarity, overloading and monitors battery status via Modbus RTU communication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Cb2420A Battery Charger: Lead Acid: 2.4 Nicd:1.51 Li-Ion: 3.65

    Uploaded by

    Ramius Hamdani
    67 views1 page
    The CB2420A battery charger provides single phase 115-277V AC input and 24V DC, 20A output for charging open lead acid, sealed lead acid, lead gel, Ni-Cd and Li-ion batteries. It uses switching technology and a 5-stage charging curve (recovery, bulk, absorption, boost, float) for fully automatic and optimized battery charging. It has protections for short circuit, reverse polarity, overloading and monitors battery status via Modbus RTU communication.

    Original Title

    CB2420A_R4-D

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The CB2420A battery charger provides single phase 115-277V AC input and 24V DC, 20A output for charging open lead acid, sealed lead acid, lead gel, Ni-Cd and Li-ion batteries. It uses switching technology and a 5-stage charging curve (recovery, bulk, absorption, boost, float) for fully automatic and optimized battery charging. It has protections for short circuit, reverse polarity, overloading and monitors battery status via Modbus RTU communication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    67 views1 page

    Cb2420A Battery Charger: Lead Acid: 2.4 Nicd:1.51 Li-Ion: 3.65

    Uploaded by

    Ramius Hamdani
    The CB2420A battery charger provides single phase 115-277V AC input and 24V DC, 20A output for charging open lead acid, sealed lead acid, lead gel, Ni-Cd and Li-ion batteries. It uses switching technology and a 5-stage charging curve (recovery, bulk, absorption, boost, float) for fully automatic and optimized battery charging. It has protections for short circuit, reverse polarity, overloading and monitors battery status via Modbus RTU communication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Input: Single-phase 115  277 Vac

    CB2420A Battery Charger Output: Battery charging 24 Vdc; 20 A


    Suited for the following battery types: Open Lead
    Acid, Sealed Lead Acid, lead Gel, Ni-Cd and Li-Ion
    Automatic diagnostic of battery status. Charging
    curve IUoU, constant voltage and current
    Switching technology, output voltage 28.8 Vdc
    Five charging levels: Recovery, Bulk, Absorption,
    Boost, Float
    Protected against short circuit, inverted polarity,
    over Load.
    Signal output (contact free) for fault battery state
    ModBus (RTU) connection
    Protection degree IP20 - DIN rail

    Technical features External Fuse (recommended) 16 A (MCB curve B)


    The CB series is a “Switching technology” and “Battery Care Battery Output (Battery Care)
    philosophy”, since years parts of the core know-how at ADEL system, Boost-Fast charge Jumper Configuration Lead Acid: 2.4
    led to the development of this advanced multi-stage battery charging 25°C (V/cell) NiCd:1.51
    method, completely automatic and suited to meet the most advanced
    requirements of battery manufacturers. The Battery Care concept is Li-ion: 3.65
    base on algorithms that implement rapid and automatic charging, Max. time Boost Charge (tpy. At In) 15 h
    battery charge optimization during time, flat batteries recovery and real Min. time Boost Charge (tpy. At In) 1 min.
    time diagnostic during installation and operation. The Real Time Auto- Float Charge Jumper Configuration 25°C Lead Acid: 2.23;
    diagnostic system, monitoring battery faults such as, elements in short (V/cell): 2.25;2.27;2.3
    circuit, accidental reverse polarity connection, disconnection of the NiCd:1,4 Li-ion: 3.45
    battery, they can easily be detected and removed by help of Blink Code Recovery Charge 2 – 16 Vdc
    of Diagnosis Led; during the installation and after sell. Each device is Charging. Max Ibatt (In) 20 A  5%
    suited for all battery types, by means of jumpers it is possible setting Efficiency (50% of In) 91%
    predefined curves for Open Lead Acid, Sealed Lead Acid, Gel, Ni-Cd Charging current limiting Iadj 10 ÷ 100 % / In
    and Li-Ion. They are programmed for two charging levels, boost and Quiescent Current  100 mA
    float. A rugged casing with bracket for DIN rail mounting provides IP20 Charging Curve automatic: IUoU 5 stage
    protection degree. Detection of element in short circuit Yes
    Norms and Certifications Sulfated battery check Yes by Jumper
    In Conformity to: EN60950 / UL60950-1 and CSA C22.2 No. Short-circuit protection) Yes
    60950-1-07 (Information Technology Equipment) – Safety – Part1: Over Load protection Yes
    General Requirement. Electrical safety; EN54-4 Fire Detection and fire Over Voltage Output protection Yes
    alarm systems; 2014/30/UE (EMC Directive); 2014/35/UE (Low Power Supply Mode Yes
    Voltage); Safety EN IEC 62368-1: 2014/AC:2015; DIN41773 (Charging
    Remote Input Control (RTCONN cable) Boost / Float
    cycle); Emission: IEC 61000-6-4; Immunity: IEC 61000-6-2. CE.
    General Data Signal Output (free switch N°2 contact)
    Insulation voltage (In /Out) 3000 Vac Dry Contact. Current can be switched (EN60947.4.1): Max: DC1: 30
    Insulation voltage (In / PE) 1605 Vac Vdc 1 A; AC1: 60 Vac 1A (Resistive load ) Min: 1mA at 5 Vdc (Min
    Insulation voltage (Out / PE) 500 Vac permissive load)
    Protection Class (EN/IEC 60529) IP20 Fault System / Low Battery C NC NO
    Protection class I, with PE connected Main or Back Up C NC NO
    Reliability: MTBF IEC 61709 > 300.000 h
    Pollution Degree Environment 2 Signal Input / Output (RJ45)
    Connection Terminal Blocks screw Type 2.5mm(24–14AWG) Temp. Comp. Battery (with external probe) RJTemp(cable) Aux1
    Signal: Remote monitoring data: RJ45: Aux 2
    Connection Terminal Blocks screw Type 4 mm (30-10 AWG) Protocol: ModBusRTU (RS485)
    Protection class (PE Connected) I, with PE
    Dimensions (w-h-d) 150x115x135 mm
    Charging
    Automatic multi-stage charging and real time diagnostic allow fast
    Weight 1.5 Kg approx
    recharge and recovery of deep discharged batteries, adding value and
    Climatic Data reliability to the system hosting. Type of charging it is Voltages and
    Ambient temperature (operation) -25 ÷ +70°C current stabilized IUoU. The state of charging battery and Auto-
    De Rating Ta > 50°C - 2.5%(In) / °C diagnosis of the systems are identified by a flashing code on a
    Ambient temperature Storage -40 ÷ +85°C Diagnosis LED and Fault Battery LED:
    Humidity at 25 °C no condensation 95% to 25°C State Diagnosis LED Battery Fault LED
    Altitude: 0 to 2 000m - 0 to 6 560ft No restrictions Float 1 Blink/2 sec OFF
    Altitude: 2 000 to 6 000m - 6 560 to 20 000ft De-rating Charging Absorption 1 Blink/sec
    5°C/1000m Type Boost 2 Blink/sec OFF
    Cooling Auto Convection Recovery 5 Blink/sec OFF
    Input Data Reverse polarity 1Blink ON
    Nominal Input Voltage (2 x Vac) 115 – 230 – 277 Auto Battery No connect 2Blink ON
    Input Voltage range (Vac) 90 – 135 / 180 – 305 diagnosis Element in Short C. 3Blink ON
    Inrush Current (Vn and In Load) I2t  35 A  5 msec. Replace Battery 5Blink ON
    Frequency 47 – 63 Hz 6%
    Input Current (115 – 230 Vac) 9 – 4.5 A
    Internal Fuse 10 A

    All specifications are subject to change without notice

    You might also like