Dial Indicator

Dial Indicator is surely utilized at manufacturing sites where dimensional high accuracy is needed to be confirmed. The graduation (1- graduation )
depends on usage and Teclock offers 6 kinds of graduations, namely 0.0005mm, 0.001mm, 0.005mm, 0.01mm, 0.05mm and 0.1mm. The strokes
are available from 0.08mm (the shortest) up to 150mm. Dial Indicator is normally not used independent but its stem or lug back is fixed to a jig
and holds work piece with the measuring stand and contact point, and displacement volume is read with short hand and pointer. The dial indicator
is applied for direct measurement to measure actual dimension and comparative measurement for measuring displacement volume from a certain
standard dimension.

0.001mm Dial Indicator

• Standard type dial indicators of graduation 0.001mm and bezel
diameter 56mm.
• Durability is pursued by protecting mechanical parts like gears with
shock absorbing mechanism (Teclock unique shock proof mechanism).
• Jeweled bearing is applied for improving durability.
• Stable repeatability accuracy is realized with lever enlargement
mechanism built–in.
• Tolerance hand is provided as standard accessory for all models for TM-1201 TM-1201PW
positive tolerance setting. Popular type Oil-proof type
• Lifting lever (Option) can be mounted . (Refer to page 25) Graduation 0.001mm Graduation 0.001mm
Measuring Range 1mm Measuring Range 1mm
• Bezel clamp (Option) can be mounted (except for TM-1201PW).
• Measuring ability can be changed .
• In case that flat back is required, add suffix “f” to the end of model
number (example =TM-1201f).
Dimensions （C） 20

40

R8
φ52.5
φ56
5
φ6.5
φ8 0
-0.009

B
D

F
E（With Flat Back）
M2.5×P0.45
TM-1251 TM-1202 TM-1205 unit：mm

Wide graduation Type suitable to 5mm stroke type Dimensions Table

width type Boregauge Graduation 0.001mm Model A B C D E F
TM-1201 62 18 15 7.5 8 16
Graduation 0.001mm Graduation 0.001mm Measuring Range 5mm
TM-1201PW 65.5（18）13.5 11 8.5 （19.5）
Measuring Range 1mm Measuring Range 2mm TM-1251 62 18 15 7.5 8 16
One Revolution 0.1mm TM-1202 62 19 15 7.5 8 16
TM-1205 62 19 15.5 7.5 8 16
unit：mm
Specifications

Graduation
Measuring Range
Repeatability （µm）
Indication Error Hysteresis Standard Contact Measuring Weight
Model （Free Stroke）
（ｍｍ） （µｍ） Adjacent Error 1/2 Revolution 1 Revolution 2 Revolution Total Range （µｍ） Point （N） （g）
Force
（ｍｍ）
TM-1201 0.001 （
1 3） 0.5 2.5 ±3 ±4 ±4 ±5 3 ZS-017 1.5 or less 170
TM-1201PW 0.001 （
1 3） 0.5 2.5 ±3 ±4 ±4 ±5 3 ZS-028 1.5 or less 180
TM-1251 0.001 （
1 3） 0.8 2.5 ±3 ±4 ±4 ±5 3 ZS-017 1.5 or less 170
TM-1202 0.001 （
2 2） 0.5 4 ±5 ±6 ±6 ±7 3 ZS-017 1.5 or less 170
TM-1205 0.001 （
5 −） 1 5 ±6 ±7 ±8 ±10 4 ZS-017 1.5 or less 170
*In case flat back is required, please add suffix “f” to the end of model number. (example=TM-1201f)

0.01mm Dial Indicator

• This is the most standard type dial indicator
of graduation 0.01mm
• The model can be selected out of stainless
stem, coaxial revolution pointer, oil
discharge function and analog function
depending on usage.
• These are standard series with high
durability and high accuracy by pursuing
parts accuracy.
• Lifting lever (Option) can be mounted
(Refer to page 25).
• Bezel clamp (Option) can be mounted
(except for TM-110PW / TM-110G ).
• Measuring ability can be changed . TM-110 TM-110R TM-110D
• In case that flat back is required, add suffix Standard type Reversed dial Coaxial revolution
type pointers type
“f” to the end of model number (example Graduation 0.01mm
Measuring Range 10mm Graduation 0.01mm Graduation 0.01mm
=TM-110f). Measuring Range 10mm
Measuring Range 10mm

2
 Dial Indicator

TM-110-4A TM-110PW TM-110P

With oil ejection Oil-Proof type Direct reading
holed bezel type Graduation 0.01mm graduation type
Graduation 0.01mm Measuring Range 10mm Graduation 0.01mm
Measuring Range 10mm Measuring Range 10mm

0.005mm
Dial Indicators

TM-105 TM-105W TM-5106 TM-5105

Type suitable to Reversed type Wide scale width type Graduation 0.005mm
Boregauge Graduation 0.01mm Graduation 0.01mm Measuring Range 5mm
Graduation 0.01mm Measuring Range 5mm Measuring Range 5mm
Measuring Range 5mm

Dimensions （E） F

Dimension Table
A

R8

Model A B C D E F G H I
TM-110 48 65 55 18 15.5 20 7.5 7.8 19.5
φ52

TM-110R 48 65 55 18 15.5 20 7.5 7.8 19.5

φC

TM-110D 48 65 55 18 17.6 20 7.5 7.8 19.5

5 TM-110-4A 48 65 55 18 15.5 20 7.5 7.8 19.5
φ6.5
TM-110PW 44.5 68.5 56 （17.5） 14.5 20 11 8.3 23.0
φ8 0-0.009 TM-110P 48 65 55 18 15.5 20 7.5 7.8 19.5
B
D

TM-105 48 65 55 18 15.5 ※ 7.5 7.8 19.5

＊ TM-105W 48 65 55 18 15.5 20 7.5 7.8 19.5
G

TM-5106 48 65 55 19 15.5 20 7.5 7.8 19.5

I

E（With Flat Back） TM-5105 48 65 55 19 15.5 20 7.5 7.8 19.5

M2.5×P0.45 unit：mm *Indicator is supplied with Flat back. unit：mm

Specifications

Graduation Measuring Range Repeatability （µm）

Indication Error Hysteresis Standard Contact Measuring Weight
Model （ｍｍ） （ｍｍ） （N） （g）
（µｍ） Adjacent Error 1/2 Revolution 1 Revolution 2 Revolution Total Range （µｍ） Point Force
TM-110 0.01 10 5 8 ±9 ±10 ±15 ±15 5 ZS-017 1.4 or less 110
TM-110R 0.01 10 5 8 ±9 ±10 ±15 ±15 5 ZS-017 1.4 or less 110
TM-110D 0.01 10 5 8 ±9 ±10 ±15 ±15 5 ZS-017 1.4 or less 115
TM-110-4A 0.01 10 5 8 ±9 ±10 ±15 ±15 5 ZS-017 1.4 or less 110
TM-110PW 0.01 10 5 8 ±9 ±10 ±15 ±15 5 ZS-028 1.4 or less 150
TM-110P 0.01 10 5 8 ±9 ±10 ±15 ±15 5 ZS-017 1.4 or less 110
TM-105 0.01 5 5 8 ±9 ±10 ±12 ±12 5 ZS-017 1.4 or less 110
TM-105W 0.01 5 5 8 ±9 ±10 ±12 ±12 5 ZS-017 1.4 or less 110
TM-5106 0.01 5 3 7 ±8 ±9 ±10 ±12 5 ZS-017 1.4 or less 145
TM-5105 0.005 5 3 7 ±8 ±9 ±10 ±12 5 ZS-017 1.4 or less 145
*In case flat back is required, please add suffix “f” to the end of model number. (example=TM-1201f)

3
 Dial Indicator

Small Dial Indicator

• As bezel diameter is small (minimum diameter=36mm), these are • Measuring range 3.5mm, 4mm, 5mm, and 10mm are available in spite
suitable to measure at the narrow setting space of production lines and of small size.
many measuring points by being mounted to the machine. • Bezel clamp (Option) can be mounted.
• Lifting lever (Option) can be mounted (except for TM-34). • Measuring ability can be changed. (Refer to page 23)
• In case that flat back is required, add suffix “f” to the end of model
number (example =TM-35f).

0.1mm

TM-35 TM-35-01 TM-35-03 TM-35-04 TM-35-02D

Standard type Long-stroke type Stem mounting Long stem type Coaxial revolution
Graduation 0.01mm Graduation 0.1mm type Graduation 0.01mm pointers type
Measuring Range 5mm Measuring Range 10mm Graduation 0.01mm Measuring Range 5mm Graduation 0.01mm
Measuring Range 5mm Measuring Range 10mm

0.005mm

TM-34
Miniature type
Graduation 0.01mm
TM-36 TM-37 TM-37C
Measuring Range 4mm Left and right Wide scale Flat back
sorting scale width type Graduation 0.01mm
Graduation 0.005mm Graduation 0.01mm Measuring Range 3.5mm
Measuring Range 3.5mm Measuring Range 3.5mm

Dimensions （F） G

R8
Dimensions Table
Model A B C D E F G H I J
TM-35 27.4 41.3 39 36.5 10 14.5 19 5 6.2 11.8
A

TM-35-01 32.5 46 39 36.5 10 14.5 19 5 6.2 16.5

φD

TM-35-03 27.4 46 39 36.5 15 14.5 19 5 6.2 11.5

φC

TM-35-04 27.4 58 39 36.5 26 14.5 19 5 6.2 12.5

φ6.5
5 TM-35-02D 32.5 46 39 36.5 10 16.5 19 5 6.2 16.5
φ8 0
-0.009 TM-34 20 39.5 35 32 10 13 19 5 6.5 12
B

TM-36 33.5 50 47 44 13 15.5 19.7 7.5 7 13.5

TM-37 33.5 50 47 44 13 15.5 19.7 7.5 7 13.5
J

I（With Flat Back）

H

＊ TM-37C 33.5 50 47 44 13 15.5 ※ 7.5 7 13.5

M2.5×P0.45 unit：mm *Indicator is supplied with Flat back. unit：mm

Specifications

Graduation Measuring Range Repeatability （µm）

Indication Error Hysteresis Measuring Weight
Model （ｍｍ） （ｍｍ） Standard Contact Point
（µｍ） Adjacent Error 1 Revolution Total Range （µｍ） （N）
Force （g）
TM-35 0.01 5 5 9 ±13 ±15 6 ZS-014 1.3 or less 72
TM-35-01 0.1 10 − − − ±50 − ZS-014 1.5 or less 72
TM-35-03 0.01 5 5 9 ±13 ±15 6 ZS-014 1.3 or less 72
TM-35-04 0.01 5 5 9 ±13 ±15 6 ZS-014 1.3 or less 75
TM-35-02D 0.01 10 5 9 ±13 ±18 7 ZS-014 1.6 or less 75
TM-34 0.01 4 5 8 ±11 ±15 6 ZS-014 1.0 or less 60
TM-36 0.005 3.5 5 8 ±10 ±12 5 ZS-017 1.2 or less 85
TM-37 0.01 3.5 5 8 ±10 ±12 6 ZS-017 1.2 or less 85
TM-37C 0.01 3.5 5 8 ±10 ±12 6 ZS-017 1.2 or less 85
*In case flat back is required, please add suffix “f” to the end of model number. (example=TM-1201f)

4
 Dial Indicator

0.01mm Long Stroke Dial Indicator

• 20mm, 30mm long stroke dial indicators
are available.
• Teclock unique shock proof mechanism
is built–in to all models.
• Lifting lever (Option) can be mounted
(except for KM-121PW).
• Bezel clamp (Option) can be mounted
(except for KM-121PW).
• In case that flat back is required, add
suffix “f” to the end of model number
(example =KM-121f ). KM-121 KM-121D
Standard type Coaxial revolution KM-121PW
pointers type Oil-proof type
Graduation 0.01mm
Measuring Range 20mm Graduation 0.01mm Graduation 0.01mm
Measuring Range 20mm Measuring Range 20mm

Measuring Range 30mm

KM-131 KM-132D KM-130 KM-130R

Standard type Coaxial revolution High accurate Reversed dial
Graduation 0.01mm pointers type type type
Measuring Range 30mm Graduation 0.01mm
Measuring Range 30mm Graduation 0.01mm Graduation 0.01mm
Measuring Range 30mm Measuring Range 30mm

Dimensions （F） G

KM-130D
Coaxial revolution
A

R8

pointers type in the

Dimensions Table
high accuracy
φC

φD

Model A B C D E F G H I J
Graduation 0.01mm 5 KM-121 36 75 55 52 18 15.5 20 7.5 7.8 29.5
φ6.5 KM-121D 36 75 55 52 18 17.6 20 7.5 7.8 29.5
Measuring Range 30mm
KM-121PW 55 89 56 52 （17.5） 14.5 20 11 8.3 （43.5）
φ8 0-0.009
B

KM-131 36 86 55 52 19 15.5 20 7.5 8 39.5

E

KM-132D 36 86 55 52 19 17.3 20 7.5 8 39.5

KM-130 38.5 92 59 54.5 22.7 17.5 22 7.5 9.6 39.8
H

KM-130R 38.5 92 59 54.5 22.7 17.5 22 7.5 9.6 39.8

I（With Flat Back）
M2.5×P0.45 KM-130D 38.5 92 59 54.5 22.7 19.5 22 7.5 9.6 39.8
unit：mm unit：mm

Specifications

Graduation Measuring Range Repeatability （µm）

Indication Error Hysteresis Measuring Weight
Model （ｍｍ） （ｍｍ） Standard Contact Point
（µｍ） Adjacent Error 1 Revolution Total Range （µｍ） （N）
Force （g）
KM-121 0.01 20 5 10 ±15 ±20 7 ZS-017 2.2 or less 110
KM-121D 0.01 20 5 10 ±15 ±20 7 ZS-017 2.2 or less 115
KM-121PW 0.01 20 5 10 ±15 ±20 7 ZS-028 2.2 or less 120
KM-131 0.01 30 5 14 ±18 ±35 8 ZS-017 2.5 or less 150
KM-132D 0.01 30 5 14 ±18 ±35 8 ZS-017 2.5 or less 155
KM-130 0.01 30 5 14 ±18 ±25 7 ZS-017 2.2 or less 150
KM-130R 0.01 30 5 14 ±18 ±25 7 ZS-017 2.2 or less 150
KM-130D 0.01 30 5 14 ±18 ±25 7 ZS-017 2.2 or less 155
*In case flat back is required, please add suffix “f” to the end of model number.

5
 Dial Indicator

Long Stroke Dial Indicator

• 50mm, 100mm, 150mm long stroke dial indicators with a large • Bezel clamp (Option) can be mounted (except for KM-05100
graduation plates are available. /KM-05150).
• Measuring up to 150mm is materialized with highest precision • Long stroke dial Indicator is widely used for construction, civil
components of high durability and Teclock original and unique engineering industries etc.
enlargement mechanism is built-in. • In case that flat back is required, add suffix “f” to the end of model
number (example =KM-155f ) (except for KM-05100 /KM-05150).

Dimensions
（16）
KM-55,KM-155:
KM-155D:（18） 21.5

KM-55 KM-155 KM-155D

79
Durability emphasis Wide graduation Coaxial revolution

φ83

φ80
type width type pointers type φ6.5 5

Graduation 0.05mm Graduation 0.01mm Graduation 0.01mm φ10 0-0.03

30.5
Measuring Range 50mm Measuring Range 50mm Measuring Range 50mm

132.5

60.5
7.5
M2.5×P0.45 8.2（With Flat Back）

Specifications

Graduation Measuring Range Repeatability （µm）

Indication Error Hysteresis Measuring Weight
Model （ｍｍ） （ｍｍ） Standard Contact Point
（µｍ） Adjacent Error 1 Revolution Total Range （µｍ） （N）
Force （g）
KM-55 0.05 50 20 30 ±50 ±100 15 ZS-017 2.5 or less 290
KM-155 0.01 50 5 15 ±20 ±35 9 ZS-017 2.5 or less 290
KM-155D 0.01 50 5 15 ±20 ±35 9 ZS-017 2.5 or less 295
*In case flat back is required, please add suffix “f” to the end of model number.

Dimensions
（22）20
A

7
KM-05100
Coaxial revolution KM-05150
16 16

pointers type Coaxial revolution

φ83

Graduation 0.05mm pointers type

3-φ6.5
Measuring Range 100mm
D

Graduation 0.05mm
Measuring Range 150mm

0
φ12 -0.05
C
B

mm M2.5×P0.45 10（With Flat Back）

525
unit：mm

Dimensions Table
Model A B C D E
The longest mechanical type model: KM-05150 KM-05100 140 235 44 80 111
KM-05150 190 335 55 120 160
Specifications unit：mm

Total Range
Graduation Measuring Range Repeatability Indication Error Hysteresis Standard Measuring Weight
Model （ｍｍ） （ｍｍ） （µｍ） （µｍ） Contact Point （N）
Force （g）
（µm）
KM-05100 0.05 100 30 ±100 15 ZS-018 2.5 or less 550
KM-05150 0.05 150 30 ±150 15 ZS-018 3.0 or less 680

6
 Dial Indicator

One Revolution Dial Indicator

• These are indicators that are effective for comparative measurement • Measuring ranges are subdivided to 0.08mm, 0.16mm, 0.2mm and 1.0mm.
with 0.0005mm, 0.001mm, and 0.01mm. • Clump is attached to 0.001mm model.
• High durability is realized with Teclock original and unique • Lifting lever (Option) can be mounted.
enlargement mechanism is built-in. • In case that flat back is required, add suffix “f” to the end of model
• Limiter is mounted as standard. number (example =TM-1200 f ).

TM-1200 TM-1210 TM-1211 TM-102

Standard type Wide scale Full range type Graduation of
Graduation 0.001mm width type Graduation 0.001mm 0.01mm type
Measuring Range 0.16mm Measuring Range 0.2mm Graduation 0.01mm
Graduation 0.001mm
With Bezel clamp With Bezel clamp Measuring Range 1.0mm
Measuring Range 0.08mm
Bezel clamp (Option)
With Bezel clamp

Dimensions （E） 20

TM-98 TM-5210
A
Graduation of Minimum graduation

R8
0.1mm type type
φC

φD
Graduation 0.1mm Graduation 0.0005mm 5
Measuring Range 3.2mm Measuring Range 0.08mm φ6.5
Bezel clamp (Option) φ8 0-0.009
B

H
7.5

Specifications
G

F（With Flat Back）

Graduation
Measuring Range
Repeatability （µm）
Indication Error Hysteresis
Standard
Measuring Weight M2.5×P0.45
Model （Free Stroke） Contact unit：mm
（ｍｍ） （µｍ） Adjacent Error 1 Revolution Total Range （µｍ） （N） （g）
Force
（ｍｍ） Point
TM-1200 0.001 0.16（3.5） 0.5 2.5 − ±5 3 ZS-017 1.5 or less 175 Dimensions Table
Model A B C D E F G H
TM-1210 0.001 0.08（3.5） 0.8 2.5 − ±3.5 3 ZS-017 1.5 or less 175 TM-1200 44.5 62 56 52.5 15 8 16 18
TM-1211 0.001 （3.5）
0.2 0.5 2.5 − ±5 3 ZS-017 1.5 or less 175 TM-1210 44.5 62 56 52.5 15 8 16 18
TM-1211 44.5 62 56 52.5 15 8 16 18
TM-102 0.01 （
1 5） 5 7 − ±10 5 ZS-017 1.4 or less 150 TM-102 48 65 55 52 15.8 8 19 18.5
TM-98 48 65 55 52 15.8 7.8 19 18.5
TM-98 0.1 （6）
3.2 20 20 − ±40 20 ZS-017 1.4 or less 150
TM-5210 44.5 62 56 52.5 15 8 16 18
TM-5210 0.0005 （3.5）
0.08 0.8 2.5 − ±2.5 2.5 ZS-017 1.5 or less 175 unit：mm
*In case flat back is required, please add suffix “f” to the end of model number.

7
 Dial Indicator

0.1mm Dial Indicator

• These are 0.1mm graduation dial indicators.
• 3 types of 10mm, 20mm and 30mm are available depending on measuring ranges.
• Lifting lever (Option) can be mounted.
• This is used to measure approximate dimensional judgment for woodwork and
leather goods etc. and also applicable for measurement of judge deviation
dimension.
• Lifting lever (Option) can be mounted.
• Measuring ability can be changed. (Refer to page 23)
• In case that flat back is required, add suffix “f” to the end of model number TM-91 TM-91R
(example =TM-91f ). Standard type Reversed dial type
Graduation 0.1mm Graduation 0.1mm
Measuring Range 10mm Measuring Range 10mm

Dimensions （15.5） 20

R8
KM-92

KM-92 KM-93 TM-35-01

φ55

φ52
Red mark
Long stroke type Long stroke type Small type 5
φ6.5
Graduation 0.1mm Graduation 0.1mm Graduation 0.1mm 0
φ8 -0.009
Measuring Range 30mm

B
Measuring Range 10mm

18
Measuring Range 20mm
(See page 20)

7.5

D
C（with Flat back）
M2.5×P0.45
Specifications unit：mm

（µm）
Indication Error Standard Dimensions Table
Graduation Measuring Range Repeatability Hysteresis Measuring Weight
Model Contact Model A B C D
（ｍｍ） （ｍｍ） （µｍ） 1 Revolution Total Range （µｍ） （N）
Force （g） TM-91 48 65 7.8 19.5
Point
TM-91R 48 65 7.8 19.5
TM-91 0.1 10 35 − ±50 − ZS-017 1.4 or less 110 KM-92 36 75 7.8 29.5
TM-91R 0.1 10 35 − ±50 − ZS-017 1.4 or less 110 KM-93 36 85 7.8 39.5
unit：mm
KM-92 0.1 20 35 ±50 ±60 − ZS-017 2.2 or less 110
KM-93 0.1 30 35 ±50 ±70 − ZS-017 2.5 or less 120
*In case flat back is required, please add suffix “f” to the end of model number.

Back Plunger Dial Indicator

• These are different from general indicators, of which gradation plate can be set in parallel to
Dimensions : ST-305A
measuring face. It is suitable for leveling smooth surface and reading from the front of measuring
57
point.
φ38
φ6.35

ST-305A
Arm type
（44）

φ30
Graduation 0.01mm
28.1

Measuring Range 5mm

M2.5×P0.45
9

4.5
unit：mm

Dimensions : ST-305B
Arm φ38
（58.5）

φ8 0-0.03
18.5

ST-305B
12.5 5.5

Stem type M2.5×P0.45

Graduation 0.01mm
Measuring Range 5mm
4.5
Displacement of can be read from above.
unit：mm

Specifications

Graduation
Measuring
Repeatability （µm）
Indication Error Hysteresis Measuring Weight
Model Range
（ｍｍ） （µｍ） Adjacent Error 1/2 Revolution 1 Revolution 2 Revolution Total Range （µｍ） （N） （g）
Force
（ｍｍ）
ST-305A 0.01 5 5 10 ±12 ±15 ±20 ±20 6 1.4 or less 80
ST-305B 0.01 5 5 10 ±12 ±15 ±20 ±20 6 1.4 or less 80

8
 Dial Indicator

Table for low measuring forted dial indicator (Build to order)

Start Stop Standard Start Stop Standard Start Stop Standard
Model Measuring Measuring Measuring Model Measuring Measuring Measuring Model Measuring Measuring Measuring
Force (N) Force (N) Force (N) Force(N) Force(N) Force (N) Force(N) Force(N) Force (N)
TM-1201 0.8 1.1 1.5 TM-34 0.15 0.3 1.0 KM-121 0.3 0.5 2.2
TM-1202 0.8 1.1 1.5 TM-35 0.15 0.2 1.3 KM-130 0.4 0.6 2.2
TM-1205 0.6 0.8 1.5 TM-36 0.4 0.7 1.2 KM-155 0.7 1.2 2.5
TM-5105 0.4 0.9 1.4 TM-37 0.4 0.7 1.2 KM-131 0.2 0.5 2.5
TM-110 0.2 0.4 1.4 KM-92 0.18 0.35 2.2 (Note) You can not use in the reverse posture.

Lifting Lever Set ZY Series Code No.

ZY-900
Applicable Models
TM-91, TM-110, TM-110P, TM-110D, TM-110-4A,
Spindle can be moved up and down by TM-110G, DM-210, DM-210P, DM-211, DM-213,
installing lift lever. It is convenient to use ①
DM-214, DM-280, DM-283, TM-98, TM-91R, TM-110R
dial indicator by installing it to a stand. ZY-901 TM-35, TM-35-03, TM-35-04
ZY-902 TM-102, TM-5210, TM-105, TM-105W, TM-5105,
③ TM-5106, TM-5210, TM-1200,TM-1201, TM-1202,
TM-1205, TM-1251,TM-1210, TM-1211, DM-250, DM-250P,
DM-251
④ ZY-922
KM-130, KM-130D, KM-130R
ZY-904 KM-121, KM-121D, KM-131, KM-132D, KM-92, KM-93,
DM-220, DM-221, DM-223, DM-223P, DM-224,
DM-224P, DM-230, DM-233, DM-234
1. Moving lift lever down,
Top Point 2. Spindle gets up ZY-905 TM-36, TM-37, TM-37C
Lift Lever Nut 3. Pointer rotates in ZY-913 TM-35-01, TM-35-02D
clockwise direction
4. Short hand rotates in
ZY-918 PC-440J, PC-465J, DMD-210J, DMD-211J, DMD-213J,
With Lifting Lever ② counter clockwise DMD-214J, DMD-215J, DMD-293J
direction.
TM-110 PC-480S2, PC-485S2, DMD-210S2, DMD-211S2,
DMD-213S2, DMD-250S2, DMD-252S2

Limiter Seal
Seal is for judging tolerance of dial
indicator. Putting seal to cover
plate of dial indicator becomes
mark to judge tolerance.

Dial Indicator used.

For outer frame diameter
TN-1051 Red TN-1052 Blue TN-1053 Green φ55-φ59.
It can be used for TM-110 /
TM-1201

9
 Dial Indicator

Parts & Accessories

Back
Backs Code No. Applicable Models
ZL-010 TM-1200, TM-1201, TM-1201PW, TM-1202, TM-1251, TM-102, TM-98, TM-5210, TM-110, TM-110R,
Lug Back
Bezel clamping by nipping TM-110D, TM-110-4A, TM-110PW, TM-110G, TM-110P, TM-105, TM-105W, TM-5105, TM-5106, TM-91,
lug back part. φ6.5 TM-91R, KM-92, KM-93, KM-121, KM-121D, KM-121PW, KM-131, KM-132D, TM-1210, TM-1211
ZL-021 TM-34
ZL-024 TM-35, TM-35-01, TM-35-02D, TM-35-03, TM-35-04
ZL-007 TM-36, TM-37, TM-37C
ZL-012 TM-1205
5 ZL-013 KM-130, KM-130D, KM-130R
ZL-017 KM-55, KM-155, KM-155D
Small type have 2-holes. unit : mm
（t=2.3mm）
ZL-066 TM-110, TM-110R, TM-110G, TM-110P, TM-105, TM-105W, TM-5105, TM-5106, TM-102, TM-91,
Flat Back （Plastic） TM-91R, KM-92, KM-93, KM-121, KM-121D, KM-121PW, KM-131, KM-132D, TM-98, TM-110D,
It can not be clamping by using back lid. TM-110-4A
（t=2mm）
ZL-067 TM-1200, TM-1201, TM-1201PW, TM-1202 , TM-5210, TM-1210, TM-1211, TM-1251, TM-110PW
（Alumi）
（t=1.5mm）
ZL-060 TM-34
（t=1.5mm）
ZL-062 TM-35, TM-35-01, TM-35-02D, TM-35-03, TM-35-04
（t=1.5mm）
ZL-063 TM-36, TM-37, TM-37C
t
（t=2mm）
ZL-073 TM-1205
（t=2mm）
ZL-076 KM-130, KM-130D, KM-130R
Small type have 2-holes.
（t=2mm）
unit : mm ZL-072 KM-55, KM-155, KM-155D
ZL-120 TM-1200, TM-1201, TM-1201PW, TM-1202, TM-1251, TM-102, TM-5210, TM-110, TM-110R,
Post Back (Make to order) TM-110D, TM-110-4A, TM-110PW, TM-110G, TM-105, TM-105W, TM-5105, TM-5106, TM-91,
φ12.7

Used by clamping post. TM-91R, TM-98, KM-92, KM-93, KM-121, KM-121D, KM-121PW, KM-131, KM-132D, TM-1210,
TM-1211
ZL-121 TM-35, TM-35-01, TM-35-02D, TM-35-03, TM-35-04
ZL-122 TM-36, TM-37, TM-37C
ZL-123 KM-130, KM-130D, KM-130R
ZL-124 KM-55, KM-155, KM-155D
2.5 31.5

Small type have 2-holes.

unit : mm
ZL-130 TM-1200, TM-1201, TM-1201PW, TM-1202, TM-1251, TM-102, TM-5210, TM-110, TM-110R, TM-110D,
Screw Post Back (Make to order)
TM-110-4A, TM-110PW, TM-110G, TM-110P, TM-105, TM-105W, TM-5105, TM-5106, TM-91, TM-91R,
φ12.7

Used with screw as guide and clamping this

with screw. TM-98, KM-92, KM-93, KM-121, KM-121D, KM-121PW, KM-131, KM-132D, TM-1210, TM-1211
ZL-131 TM-35, TM-35-01, TM-35-02D, TM-35-03, TM-35-04
ZL-132 TM-36, TM-37, TM-37C
M6×1 ZL-133 KM-130, KM-130D, KM-130R
ZL-134 KM-55, KM-155, KM-155D
3 7

Small type have 2-holes. unit : mm

4 ZL-140 TM-1200, TM-1201, TM-1201PW, TM-1202, TM-1251, TM-102, TM-5210, TM-110, TM-110R, TM-110D,
Adjustable Bracket Back
TM-110-4A, TM-110PW, TM-110G, TM-105, TM-110P, TM-105W, TM-5105, TM-5106, TM-91, TM-91R,
(Make to order)
Can be slide with gutter as guide. Clamped TM-98, KM-92, KM-93, KM-121,KM-121D, KM-121PW, KM-131, KM-132D, TM-1210, TM-1211
by screw. ZL-142 TM-35, TM-35-01, TM-35-02D, TM-35-03, TM-35-04
22.2
12.7

ZL-141 TM-36, TM-37, TM-37C

ZL-143 KM-55, KM-155, KM-155D
M6×1

2.5 7.5
Small type have 2-holes. unit : mm

Magnetic Back ZL-900 TM-1200, TM-1201, TM-1201PW, TM-1202, TM-1251, TM-102, TM-5210, TM-110, TM-110R,
(Make to order) TM-110D, TM-110-4A, TM-110PW, TM-110G, TM-105, TM-110P, TM-105W, TM-5105, TM-5106,
Can be easily installed with magnet on TM-91, TM-91R, TM-98, KM-92, KM-93, KM-121, KM-121D, KM-121PW, KM-131, KM-132D,
iron Plates or machinery. TM-1210, TM-1211
φ50

φ44

Small type have 2-holes. unit : mm

10
 Dial Indicator

Contact Point Set Steel Ball Contact Point

ZS-017 ZS-028
ZS-900
M2.5×P0.45 φ3.2 M2.5×P0.45
ZS-512 ZS-020 φ3.2 Steel Ball Steel Ball
（Material SK4） （Material SUM）
M2.5×P0.45 M2.5×P0.45

φ5

φ6
φ5 7.5 5 12 5

φ5
8.5 5 8.5 5
ZS-031 ZS-034
φ3.2
M2.5×P0.45
ZS-036 ZS-008 φ3.2
Steel Ball
M2.5×P0.45 Steel Ball

（Material SK4） （Material SUM）

φ4.5
φ5
M2.5×P0.45
M2.5×P0.45

φ10
φ2

φ5

15 5 17.3 5

25 5

3 5
φ3.2
ZS-037(Extension Rods) φ3.2 ZS-038(Extension Rods)
Steel Steel
ZS-508 ZS-509 M2.5×P0.45 Ball M2.5×P0.45

φ2.6

φ2.6
Ball
（Material SK4） （Material SK4）

φ4.5

φ4.5
M2.5×P0.45 M2.5×P0.45
6 6
φ10
φ10

38.5 5 45.5 5
φ8

5 5 5 5

Flat Contact Point Needle Contact Point

ZS-506 ZS-536 ZS-539 ZS-594 ZS-515 ZS-518
（Material SK4） （Material SK4）
（Material SK4） （Material SK4） （Material SK4）
Ceramic M2.5×P0.45 M2.5×P0.45
φ0.12
M2.5×P0.45

φ1.12
M2.5×P0.45

φ0.3
M2.5×P0.45 M2.5×P0.45

φ1.3

φ4.5
φ4
φ4.5
φ18

φ30

φ10

3.4 （6.7） 8 （4.5）

10.1 5 12.5 5
2
0.

4 5 4 5 4 5 17.3 5
C

ZS-523
（Material SK4）

Flat Needle Contact Point

M2.5×P0.45
φ0.3

M2.5×P0.45 Dimensions Table

φ4.5
ZS-527 ZS-530 Code No. D L
φ1.7
φD

ZS-527 1.0 17.3 14.5 （2.8）

ZS-528 ZS-531
φ4.5

ZS-528 1.5 17.3

ZS-529 1.5 27.3 17.3 5
（Material SK4）
ZS-529 L
2.8
5
ZS-530
ZS-531
2.0
2.0
17.3
27.3
Unit：mm

Extension Rods T-shape Contact Point

ZS-663・664・665・666・670 ZS-526
（Material SUM） （Material SK4）
M2.5×P0.45
M2.5×P0.45 M2.5×P0.45
Dimensions Table
φ2

φ5

Code No. L
φ5
φ4.5

ZS-670 10
ZS-663 20
6 ZS-664 40 0.3 12 5 5
ZS-665 60
L 5 ZS-666 80
Example
Unit：mm

Carbide Flat Needle Contact Point Carbide Contact Point

ZS-577・578・579・580・581・582・583 ZS-117
L2 5
L1 M2.5×P0.45
φ3 Carbide Ball
φD

φ4.5

φ5

Carbide Bar
M2.5×P0.45
7.3 5

Dimensions Table
Code No. D L1 L2 Code No. D L1 L2
ZS-532 ZS-533
Carbide tip
ZS-577 0.5 12 18.3 ZS-580 1.5 12 18.3 （Mirror finish） Carbide tip
ZS-578 0.8 12 18.3 ZS-581 1.5 22 28.3 M2.5×P0.45 （Mirror finish） M2.5×P0.45
ZS-579 1.0 12 18.3 ZS-582 2.0 12 18.3
ZS-583 2.0 22 28.3
φ5
φ5

Unit：mm

10 5 4 5

11
 Dial Indicator

Special Contact Point Example of use

ZS-907・908・909 ZS-910 Can also be used in other LT for contact point.

Contact Point Body
（Offset Contact Point with ZS-713） （for Deep Hole with ZS-713） ZS-422
φ2 Carbide ball L1 7.5 Contact point fo LT M2.5×P0.45
Dimensions Table
Code No. Contact point body θ L1 L2
10

M2.5×P0.45

φ5
ZS-907 ZS-419 30° 17.1 7
L2

θ ZS-908 ZS-420 45° 15.1 9.1

ZS-909 ZS-421 60° 12.3 10.7 10 10 5
φ6

Contact point for LT Can also be used in other LT for contact point. unit：mm
M1.7×P0.35 φ2 Carbide Ball M1.7×P0.35 Example of use
Contact Point Body

Roller Point φD M2.5×P0.45

Nylon Ball Point
ZS-802・803・804 ZS-054 M2.5×P0.45

2.0
（Material SUJ2）

8
Dimensions Table

φ5
L
A
Code No. A B D L W
1/8" Nylon Ball
ZS-802 5.5 6 6 16.5 2.6
ZS-803 8 11 11 21.5 4 7.5 5
ZS-804 13.5 22 14 32.5 7 SUJ2 12.5
W φB
unit：mm

Parts List
0.01mm Dial Indicator Model No. TM-110 TM-105 TM-105W
Key No. Product No. 00-465-04 00-461-04 00-463-03
Part Name

TM-110/105/105W 1
2
Bottom Plate Assy
Center Pinion
DG-110501S
DG-110009S
3 #1 Gear Assy DG-110511S
4 #2 Gear Assy DG-110514P
5 Hair Spring DG-110516
6 Hair Spring Pin DG-921018
7 Case DG-110541S
8 Spindle DG-110046S DG-105046S
9 Stop Screw DG-110047
10 Top Point DG-110048S
Flat Back 11 Slide Pin DG-110049S
12 Shock Pillow DG-110056S
13 Spring DG-110067
14 Cap ZY-006
15 Bottom Plate Screw 001523
16 Bezel DG-110081S DG-121081S
17 Dial Cover DG-110088
18 Pointer DG-110584
19 Counter Hand DG-110586
20 #0 Screw 021033
21 Bezel Spring DG-110090S
22 Tolerance Hand R DG-110092
23 Tolerance Hand L DG-110093
24 Dial Plate T-5101 T-62 T-5101
25 Counter Hand Dial Plate T-5262 T-5271 T-5269
26 Contact Point ZS-017
27 Lug Back ZL-010 – ZL-010
28 Flat Back – ZL-066 –
29 #0 Screw 001328

0.001mm Dial Indicator Key

No.
Part name TM-1201 TM1202
Key
No.
Part name TM-1201 TM1202
1 Bottom Plate 28 Case DG-1201641
Center 29 Spindle DG-1201046
2
Bearing 30 Stop Screw DG-1201047

TM-1201/1202
#1 Upper 31 Top Screw DG-36048
3
Plate 32 Slide Pin DG'12O1O49
#2 Upper 33 Cap ZY-012
4
Plate Contacting
5 #1 Post 35 DG-1201554
Point Assy.
6 #2 Post Contactor
Bottom Plate Assy. 36 DG-1201056
Upper Plate Screw
7 DG-1201501
Screw A 37 Top Washer DG-1201058
Upper Plate 38 Spring DG-1201067
8
Screw B Base Plate
9 Bezel Clamp 39 001314
Screw
Bezel Clamp 40 Bezel DG-1201081
10
Screw 41 Dial Cover DG-1201088
11 Lever Statto 42 Pointer DG-1201584
12 Spring Lever Counter
13 #3 Post 43 DG-1201586
Hand
Spring Lever 44 Bezel Spring DG-110090
14 001308
Screw Tolerance
15 #0 Screw 001308 45 DG-110092
Hand R
16 Center Pinion DG-1201009 DG-1202009 Tolerance
17 #1 Gear Assy. DG-1201511 DG-1202511 46 DG-110093
Hand L
18 #2 Gear Assy. DG-1201514 49 Dial Plate T-53O4B
Sector Gear Counter
19 DG-1201323
Assy. 50 Hand Dial T-5004B T-5OO5B
20 Bracket DG-1201331 Plate
Bracket Contact
21 DG-1201032 51 ZS-017
Screw A Point
Bracket 52 Lug Back ZL-010
22 DG-1201033
Screw B Lag Back
54 001314
23 Cam DG-1201034 Screw
24 Hair Spring DG-121516
Hair Spring
25 DG-131018
Pin
26 Spring B DG-1201037
27 Stopper DG-1201038

12