Parche CRP 65 - Ficha Técnica - en Ingles

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Polyethylene Repair

Products
Coating repair products for corrosion
protection
Canusa’s Repair Products are used to repair and/or fill voids in
damaged coatings. A full line of products provides the flexibility to
make a variety of repairs to mainline or field joint coatings, ranging
from minor coating damage to exposed steel.

All of Canusa’s Pipeline Repair Products offer flexibility of


installation, exhibit excellent adhesion to steel and are compatible Applications
with all common pipeline coatings. These products also remain
permanently flexible and provide superior resistance to moisture Oil & Gas
infiltration, resulting in complete corrosion protection.

Water Pipelines
The Coating Repair Patch (CRP)
• Consists of an irradiated, cross-linked polyolefin sheet coated
with a heat-activated adhesive, designed specifically for sealing Repair & Rehab
and protection of damaged pipeline coatings up to 50mm x 50mm
in size.
• Fast installation with no special tools required, providing a barrier
to moisture and corrosion with resistance to abrasion and shear
forces during pipeline installation and while in-service.
Melt Sticks (MS)
• Melt Sticks are heat-activated adhesives supplied as a rod for
ease of application and are ideal for small coating repairs ranging
Repair Patch
from superficial damage to holidays and cracks up to 10mm mx
10mm.
Mastic Filler
Mastic Filler (MF) - F-124
• Mastic Filler is used to fill larger voids and deep crevices in
n
damaged coatings prior to the application of Canusa Repair ir
Patches.

Melt Stick

PRODUCT DATA SHEET canusacps.com


The product information
shown here is intended as a guide
Polyethylene Repair for standard products.

Consult your Canusa


Products representative for specific
projects or unique applications.

Coating repair products for corrosion protection

Sleeve Operating Characteristics CRPO CRPN CRP65


Up to 60°C Up to 80°C Up to 65°C
Pipeline Operating Temp.
(140°F) (176°F) (150°F)
75°C 90°C 90°C
Minimum Installation Temp.
(167°F) (194°F) (195°F)
PE, PP, PU, PE, PP, PU, PE, FBE,
Mainline Coating Compatibility
FBE, CT, Bit FBE, CT, Bit PP, HPCC

Adhesive Properties Test Method


Softening Point ASTM E28 102°C 124°C 94°C

Lap Shear @ 23°C ISO 21809-3 15 N/cm2 52 N/cm2 245 N/cm2

Backing Properties
Canada
SFL Canusa Canada
Tensile Strength ASTM D638 24 MPa 24 MPa 24 MPa 333 Bay Street, Suite 2400
Toronto ON M5H 2T6, Canada
Elongation ASTM D638 700% 700% 700%
info@canusacps.com
Hardness ASTM D2240 48 Shore D 48 Shore D 48 Shore D

Volume Resistivity ASTM D257


1017 1017 1017 USA
ohm-cm ohm-cm ohm-cm
3813A Helios Way, Suite 900
Sleeve Properties Pflugerville, TX 78660

Impact ISO 21809-3 pass pass pass info@canusacps.com

Indentation ISO 21809-3 pass pass pass Europe


Adhesion Strength Elskensakker 8
ISO 21809-3 8 N/cm 30 N/cm 60 N/cm
@ 23°C 5571 SK Bergeijk
Cathodic The Netherlands (NL)
ASTM G8 8 mm rad 17 mm rad 13 mm rad
Disbondment
Tel: +31 497 54 25 27

Middle East
Melt Stick Properties Test Method Typical Values Plot # 37-WR43, Sector no.: ICAD III
Softening Point ASTM E28 124°C Musaffah South, PO Box 2621
Abu Dhabi, United Arab Emirates
Lap Shear @ 23°C IS0 21809-3 >300 N/cm2
Tel: +971 (2) 204 9800

Quality Management
Mastic Filler (F-124) Properties Test Method Typical Values system registered to
ISO 9001
Softening Point ASTM E28 146°C

Lap Shear @ 23°C IS0 21809-3 5 N/cm2


Canusa warrants that the product conforms to its
chemical and physical description and is appropriate
for the use stated on the product data sheet when
used in compliance with Canusa’s written instructions.
Since many installation factors are beyond our control,
the user shall determine the suitability of the products
for the intended use and assume all risks and liabilities
in connection therewith. Canusa’s liability is stated
in the standard terms and conditions of sale. Canusa
makes no other warranty either expressed or implied.
Since 1967, Canusa-CPS has been a leading developer and manufacturer of specialty pipeline coatings All information contained in this data sheet is to be
used as a guide and is subject to change without
for the sealing and corrosion protection of pipeline joints and other substrates. Canusa-CPS high notice. This data sheet supersedes all previous data
sheets on this product. E&OE
performance products are manufactured to the highest quality standards and are available in a number
of configurations to accommodate many specific project applications. PDS_PRP (PE)_rev024

You might also like