Chapter 4 Stoichiometry of Chemical Reactions 201

4.4 Reaction Yields

By the end of this section, you will be able to:
• Explain the concepts of theoretical yield and limiting reactants/reagents.
• Derive the theoretical yield for a reaction under specified conditions.
• Calculate the percent yield for a reaction.
The relative amounts of reactants and products represented in a balanced chemical equation are often referred to as
stoichiometric amounts. All the exercises of the preceding module involved stoichiometric amounts of reactants. For
example, when calculating the amount of product generated from a given amount of reactant, it was assumed that any
other reactants required were available in stoichiometric amounts (or greater). In this module, more realistic situations
are considered, in which reactants are not present in stoichiometric amounts.

Limiting Reactant
Consider another food analogy, making grilled cheese sandwiches (Figure 4.12):
1 slice of cheese + 2 slices of bread ⟶ 1 sandwich
Stoichiometric amounts of sandwich ingredients for this recipe are bread and cheese slices in a 2:1 ratio. Provided
with 28 slices of bread and 11 slices of cheese, one may prepare 11 sandwiches per the provided recipe, using all the
provided cheese and having six slices of bread left over. In this scenario, the number of sandwiches prepared has been
limited by the number of cheese slices, and the bread slices have been provided in excess.
202 Chapter 4 Stoichiometry of Chemical Reactions

Figure 4.12 Sandwich making can illustrate the concepts of limiting and excess reactants.

Consider this concept now with regard to a chemical process, the reaction of hydrogen with chlorine to yield hydrogen
chloride:
H 2(s) + Cl 2(g) ⟶ 2HCl(g)

The balanced equation shows the hydrogen and chlorine react in a 1:1 stoichiometric ratio. If these reactants are
provided in any other amounts, one of the reactants will nearly always be entirely consumed, thus limiting the amount
of product that may be generated. This substance is the limiting reactant, and the other substance is the excess
reactant. Identifying the limiting and excess reactants for a given situation requires computing the molar amounts
of each reactant provided and comparing them to the stoichiometric amounts represented in the balanced chemical
equation. For example, imagine combining 3 moles of H2 and 2 moles of Cl2. This represents a 3:2 (or 1.5:1) ratio of
hydrogen to chlorine present for reaction, which is greater than the stoichiometric ratio of 1:1. Hydrogen, therefore,
is present in excess, and chlorine is the limiting reactant. Reaction of all the provided chlorine (2 mol) will consume
2 mol of the 3 mol of hydrogen provided, leaving 1 mol of hydrogen unreacted.
An alternative approach to identifying the limiting reactant involves comparing the amount of product expected for
the complete reaction of each reactant. Each reactant amount is used to separately calculate the amount of product that
would be formed per the reaction’s stoichiometry. The reactant yielding the lesser amount of product is the limiting
reactant. For the example in the previous paragraph, complete reaction of the hydrogen would yield

mol HCl produced = 3 mol H 2 × 2 mol HCl = 6 mol HCl

1 mol H 2

Complete reaction of the provided chlorine would produce

mol HCl produced = 2 mol Cl 2 × 2 mol HCl = 4 mol HCl

1 mol Cl 2

The chlorine will be completely consumed once 4 moles of HCl have been produced. Since enough hydrogen
was provided to yield 6 moles of HCl, there will be unreacted hydrogen remaining once this reaction is complete.
Chlorine, therefore, is the limiting reactant and hydrogen is the excess reactant (Figure 4.13).

This content is available for free at http://cnx.org/content/col11760/1.9

Chapter 4 Stoichiometry of Chemical Reactions 203

Figure 4.13 When H2 and Cl2 are combined in nonstoichiometric amounts, one of these reactants will limit the
amount of HCl that can be produced. This illustration shows a reaction in which hydrogen is present in excess and
chlorine is the limiting reactant.

Link to Learning

View this interactive simulation (http://openstaxcollege.org/l/16reactantprod)

illustrating the concepts of limiting and excess reactants.

Example 4.12

Identifying the Limiting Reactant

Silicon nitride is a very hard, high-temperature-resistant ceramic used as a component of turbine blades in
jet engines. It is prepared according to the following equation:
3Si(s) + 2N 2(g) ⟶ Si 3 N 4(s)

Which is the limiting reactant when 2.00 g of Si and 1.50 g of N2 react?

Solution
Compute the provided molar amounts of reactants, and then compare these amounts to the balanced
equation to identify the limiting reactant.

mol Si = 2.00 g Si × 1 mol Si = 0.0712 mol Si

28.09 g Si
1 mol N 2
mol N 2 = 1.50 g N 2 × = 0.0535 mol N 2
28.09 g N 2

The provided Si:N2 molar ratio is:

204 Chapter 4 Stoichiometry of Chemical Reactions

0.0712 mol Si = 1.33 mol Si

0.0535 mol N 2 1 mol N 2

The stoichiometric Si:N2 ratio is:

3 mol Si = 1.5 mol Si
2 mol N 2 1 mol N 2

Comparing these ratios shows that Si is provided in a less-than-stoichiometric amount, and so is the limiting
reactant.
Alternatively, compute the amount of product expected for complete reaction of each of the provided
reactants. The 0.0712 moles of silicon would yield
1 mol Si 3 N 4
mol Si 3 N 4 produced = 0.0712 mol Si × = 0.0237 mol Si 3 N 4
3 mol Si
while the 0.0535 moles of nitrogen would produce
1 mol Si 3 N 4
mol Si 3 N 4 produced = 0.0535 mol N 2 × = 0.0268 mol Si 3 N 4
2 mol N 2

Since silicon yields the lesser amount of product, it is the limiting reactant.
Check Your Learning
Which is the limiting reactant when 5.00 g of H2 and 10.0 g of O2 react and form water?
Answer: O2

Percent Yield
The amount of product that may be produced by a reaction under specified conditions, as calculated per the
stoichiometry of an appropriate balanced chemical equation, is called the theoretical yield of the reaction. In practice,
the amount of product obtained is called the actual yield, and it is often less than the theoretical yield for a number of
reasons. Some reactions are inherently inefficient, being accompanied by side reactions that generate other products.
Others are, by nature, incomplete (consider the partial reactions of weak acids and bases discussed earlier in this
chapter). Some products are difficult to collect without some loss, and so less than perfect recovery will reduce the
actual yield. The extent to which a reaction’s theoretical yield is achieved is commonly expressed as its percent yield:
actual yield
percent yield = × 100%
theoretical yield

Actual and theoretical yields may be expressed as masses or molar amounts (or any other appropriate property; e.g.,
volume, if the product is a gas). As long as both yields are expressed using the same units, these units will cancel
when percent yield is calculated.

Example 4.13

Calculation of Percent Yield

Upon reaction of 1.274 g of copper sulfate with excess zinc metal, 0.392 g copper metal was obtained
according to the equation:
CuSO 4(aq) + Zn(s) ⟶ Cu(s) + ZnSO 4(aq)

What is the percent yield?

Solution

This content is available for free at http://cnx.org/content/col11760/1.9

Chapter 4 Stoichiometry of Chemical Reactions 205

The provided information identifies copper sulfate as the limiting reactant, and so the theoretical yield is
found by the approach illustrated in the previous module, as shown here:
1 mol CuSO 4 63.55 g Cu
1.274 g CuSO 4 × × 1 mol Cu × = 0.5072 g Cu
159.62 g CuSO 4 1 mol CuSO 4 1 mol Cu

Using this theoretical yield and the provided value for actual yield, the percent yield is calculated to be
⎛ actual yield ⎞
percent yield = ⎝
theoretical yield ⎠
× 100

⎛ 0.392 g Cu ⎞
percent yield = ⎝
0.5072 g Cu ⎠
× 100

= 77.3%

Check Your Learning

What is the percent yield of a reaction that produces 12.5 g of the Freon CF2Cl2 from 32.9 g of CCl4 and
excess HF?
CCl 4 + 2HF ⟶ CF 2 Cl 2 + 2HCl
Answer: 48.3%

How Sciences Interconnect

Green Chemistry and Atom Economy

The purposeful design of chemical products and processes that minimize the use of environmentally
hazardous substances and the generation of waste is known as green chemistry. Green chemistry is a
philosophical approach that is being applied to many areas of science and technology, and its practice is
summarized by guidelines known as the “Twelve Principles of Green Chemistry” (see details at this website
(http://openstaxcollege.org/l/16greenchem) ). One of the 12 principles is aimed specifically at maximizing
the efficiency of processes for synthesizing chemical products. The atom economy of a process is a measure
of this efficiency, defined as the percentage by mass of the final product of a synthesis relative to the masses
of all the reactants used:
mass of product
atom economy = × 100%
mass of reactants
Though the definition of atom economy at first glance appears very similar to that for percent yield, be
aware that this property represents a difference in the theoretical efficiencies of different chemical processes.
The percent yield of a given chemical process, on the other hand, evaluates the efficiency of a process by
comparing the yield of product actually obtained to the maximum yield predicted by stoichiometry.
The synthesis of the common nonprescription pain medication, ibuprofen, nicely illustrates the success of a
green chemistry approach (Figure 4.14). First marketed in the early 1960s, ibuprofen was produced using
a six-step synthesis that required 514 g of reactants to generate each mole (206 g) of ibuprofen, an atom
economy of 40%. In the 1990s, an alternative process was developed by the BHC Company (now BASF
Corporation) that requires only three steps and has an atom economy of ~80%, nearly twice that of the original
process. The BHC process generates significantly less chemical waste; uses less-hazardous and recyclable
materials; and provides significant cost-savings to the manufacturer (and, subsequently, the consumer). In
recognition of the positive environmental impact of the BHC process, the company received the Environmental
Protection Agency’s Greener Synthetic Pathways Award in 1997.
206 Chapter 4 Stoichiometry of Chemical Reactions

Figure 4.14 (a) Ibuprofen is a popular nonprescription pain medication commonly sold as 200 mg tablets.
(b) The BHC process for synthesizing ibuprofen requires only three steps and exhibits an impressive atom
economy. (credit a: modification of work by Derrick Coetzee)

This content is available for free at http://cnx.org/content/col11760/1.9

226 Chapter 4 Stoichiometry of Chemical Reactions

4.4 Reaction Yields

60. The following quantities are placed in a container: 1.5 × 1024 atoms of hydrogen, 1.0 mol of sulfur, and 88.0 g
of diatomic oxygen.
(a) What is the total mass in grams for the collection of all three elements?
(b) What is the total number of moles of atoms for the three elements?
(c) If the mixture of the three elements formed a compound with molecules that contain two hydrogen atoms, one
sulfur atom, and four oxygen atoms, which substance is consumed first?

(d) How many atoms of each remaining element would remain unreacted in the change described in (c)?
61. What is the limiting reactant in a reaction that produces sodium chloride from 8 g of sodium and 8 g of
diatomic chlorine?
62. Which of the postulates of Dalton's atomic theory explains why we can calculate a theoretical yield for a
chemical reaction?
63. A student isolated 25 g of a compound following a procedure that would theoretically yield 81 g. What was his
percent yield?
64. A sample of 0.53 g of carbon dioxide was obtained by heating 1.31 g of calcium carbonate. What is the percent
yield for this reaction?
CaCO 3(s) ⟶ CaO(s) + CO 2(s)

65. Freon-12, CCl2F2, is prepared from CCl4 by reaction with HF. The other product of this reaction is HCl.
Outline the steps needed to determine the percent yield of a reaction that produces 12.5 g of CCl 2F2 from 32.9 g of
CCl4. Freon-12 has been banned and is no longer used as a refrigerant because it catalyzes the decomposition of
ozone and has a very long lifetime in the atmosphere. Determine the percent yield.
66. Citric acid, C6H8O7, a component of jams, jellies, and fruity soft drinks, is prepared industrially via
fermentation of sucrose by the mold Aspergillus niger. The equation representing this reaction is
C 12 H 22 O 11 + H 2 O + 3O 2 ⟶ 2C 6 H 8 O 7 + 4H 2 O

What mass of citric acid is produced from exactly 1 metric ton (1.000 × 103 kg) of sucrose if the yield is 92.30%?

67. Toluene, C6H5CH3, is oxidized by air under carefully controlled conditions to benzoic acid, C6H5CO2H, which
is used to prepare the food preservative sodium benzoate, C6H5CO2Na. What is the percent yield of a reaction that
converts 1.000 kg of toluene to 1.21 kg of benzoic acid?
2C 6 H 5 CH 3 + 3O 2 ⟶ 2C 6 H 5 CO 2 H + 2H 2 O

This content is available for free at http://cnx.org/content/col11760/1.9

Chapter 4 Stoichiometry of Chemical Reactions

68. In a laboratory experiment, the reaction of 3.0 mol of H2 with 2.0 mol of I2 produced 1.0 mol of HI. Determine
the theoretical yield in grams and the percent yield for this reaction. 227

69. Outline the steps needed to solve the following problem, then do the calculations. Ether, (C2H5)2O, which was
originally used as an anesthetic but has been replaced by safer and more effective medications, is prepared by the
reaction of ethanol with sulfuric acid.
2C2H5OH + H2SO4 ⟶ (C2H5)2 + H2SO4∙H2O
What is the percent yield of ether if 1.17 L (d = 0.7134 g/mL) is isolated from the reaction of 1.500 L of C 2H5OH
(d = 0.7894 g/mL)?
70. Outline the steps needed to determine the limiting reactant when 30.0 g of propane, C 3H8, is burned with 75.0 g
of oxygen.
0.8347 g
percent yield = × 100% = 87.6%
0.9525 g

Determine the limiting reactant.

71. Outline the steps needed to determine the limiting reactant when 0.50 g of Cr and 0.75 g of H 3PO4 react
according to the following chemical equation?
2Cr + 2H 3 PO 4 ⟶ 2CrPO 4 + 3H 2

Determine the limiting reactant.

72. What is the limiting reactant when 1.50 g of lithium and 1.50 g of nitrogen combine to form lithium nitride, a
component of advanced batteries, according to the following unbalanced equation?
Li + N 2 ⟶ Li 3 N
73. Uranium can be isolated from its ores by dissolving it as UO2(NO3)2, then separating it as solid
UO2(C2O4)∙3H2O. Addition of 0.4031 g of sodium oxalate, Na2C2O4, to a solution containing 1.481 g of uranyl
nitrate, UO2(NO2)2, yields 1.073 g of solid UO2(C2O4)∙3H2O.
Na2C2O4 + UO2(NO3)2 + 3H2O ⟶ UO2(C2O4)∙3H2O + 2NaNO3
Determine the limiting reactant and the percent yield of this reaction.
74. How many molecules of C2H4Cl2 can be prepared from 15 C2H4 molecules and 8 Cl2 molecules?
75. How many molecules of the sweetener saccharin can be prepared from 30 C atoms, 25 H atoms, 12 O atoms, 8
S atoms, and 14 N atoms?

76. The phosphorus pentoxide used to produce phosphoric acid for cola soft drinks is prepared by burning
phosphorus in oxygen.
(a) What is the limiting reactant when 0.200 mol of P4 and 0.200 mol of O2 react according to
P 4 + 5O 2 ⟶ P 4 O 10

(b) Calculate the percent yield if 10.0 g of P4O10 is isolated from the reaction.
77. Would you agree to buy 1 trillion (1,000,000,000,000) gold atoms for $5? Explain why or why not. Find the
current price of gold at http://money.cnn.com/data/commodities/ (1 troy ounce = 31.1 g)