Scribd Logo
Upload

Welcome to Scribd!

  • 687 views

    Hyva 70535211 Fe A149-3-03830-K1645-Hd-Hc

    Uploaded by

    Frans Metin
    This document provides specifications for an Alpha series front end lifting cylinder. It includes: - Dimensions and specifications for the cylinder including maximum pressure, flow rates, weights and dimensions of stages. - A diagram and parts list for the cylinder components. - Charts with tipping weights specifications at different lengths, angles, and pressures. - References for additional documentation on brackets, instructions, specifications. The cylinder can lift up to 84 tons and has a maximum pressure of 250 bar over its 3830mm stroke. It weighs 168kg and includes detailed diagrams of its internal components and sealing parts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Hyva 70535211 Fe A149-3-03830-K1645-Hd-Hc

    Uploaded by

    Frans Metin
    687 views2 pages
    This document provides specifications for an Alpha series front end lifting cylinder. It includes: - Dimensions and specifications for the cylinder including maximum pressure, flow rates, weights and dimensions of stages. - A diagram and parts list for the cylinder components. - Charts with tipping weights specifications at different lengths, angles, and pressures. - References for additional documentation on brackets, instructions, specifications. The cylinder can lift up to 84 tons and has a maximum pressure of 250 bar over its 3830mm stroke. It weighs 168kg and includes detailed diagrams of its internal components and sealing parts.

    Original Title

    HYVA 70535211 FE A149-3-03830-K1645-HD-HC

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for an Alpha series front end lifting cylinder. It includes: - Dimensions and specifications for the cylinder including maximum pressure, flow rates, weights and dimensions of stages. - A diagram and parts list for the cylinder components. - Charts with tipping weights specifications at different lengths, angles, and pressures. - References for additional documentation on brackets, instructions, specifications. The cylinder can lift up to 84 tons and has a maximum pressure of 250 bar over its 3830mm stroke. It weighs 168kg and includes detailed diagrams of its internal components and sealing parts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    687 views2 pages

    Hyva 70535211 Fe A149-3-03830-K1645-Hd-Hc

    Uploaded by

    Frans Metin
    This document provides specifications for an Alpha series front end lifting cylinder. It includes: - Dimensions and specifications for the cylinder including maximum pressure, flow rates, weights and dimensions of stages. - A diagram and parts list for the cylinder components. - Charts with tipping weights specifications at different lengths, angles, and pressures. - References for additional documentation on brackets, instructions, specifications. The cylinder can lift up to 84 tons and has a maximum pressure of 250 bar over its 3830mm stroke. It weighs 168kg and includes detailed diagrams of its internal components and sealing parts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Alpha series - Front end cylinder with single eye

    FE A149-3-03830-009-K1645-HD-HC Item no. 70535211


    Tipping weight 63 - 84 ton

    * incl. 20 [-5; +30] mm pull out 3D model is available on request

    Specifications
    Max. working pressure 250 bar Max. pump flow (with KO) 220 L/min Resulting tipping time (with KO) 14 sec
    Weight 168 kg Max. pump flow (without KO) 190 L/min Resulting tipping time (without KO) 16 sec
    Working volume 51 L Allowable lowering time 11 sec
    Total volume 55 L
    KO: Hyva pneumatic knock off
    Max. cyl. load (start tipping) 345 kN
    Extension 1 2 3 4 5 6 7 Total
    Effective diameter [mm] 149 129 110
    Stroke* [mm] 1260 1285 1285 3830

    Technical notes
    This cylinder is a lifting device only. It should not be used as a structural member and should not be subjected to side loads. When the cylinder is
    mounted at an angle, the maximum tipping weight could be reduced. Maximum backwards angle of rotation during operation is 29 deg. Working
    pressure depends on the application, but must never exceed the maximum working pressure stated. Working temperature range is between -40°C
    and +80°C. Maximum duration of extension is 0.5 hours (excluding hard chromed stages). Cylinder is painted black (RAL9005) with a thickness
    conforming to the 480 hours neutral salt spray test as per ISO 9227 (ISO 10289, rating 9).

    Related documentation
    Bracket options: 015BRA10 & 015BRA13 Mounting instructions: CYL-0031 Oil specifications: OIL-0011

    Tipping weight
    BL body length BL 5000 4850 4700
    OH rear overhang OH 200 400 600 200 400 600 200 400 600
    Ycog vert. pos. centre At 47 49 51 48 51 53 50 53 56
    of gravity
    Qo pivot length Ycog
    C bracket length 400 63 68 74 64 69 76 65 71 79
    At tipping angle 700 69 75 84 70 78 72
    stroke x 60 / Qo 1000 76
    Tipping weight at maximum pressure of 250 bar for a vertically mounted cylinder and C is 158 mm

    For detailed tipping calculations please refer to: https://tipper.hyva.com


    Subject to change without notice, no rights reserved Page 1/2 DO-E 70535211 / 2014-9-19 / RV AA
    Alpha series - Front end cylinder with single eye
    FE A149-3-03830-009-K1645-HD-HC Item no. 70535211

    Pos. Part no. Description Qty.


    C01 71839120 DUST COVER FE 149-3 1

    P01 74413551 PISTON FL2 S 110-1560-HD-HC 1


    P02 71807112 K SLIDER FL 110 (2 X 1/2) A35 1
    P03 71851110 K OUTER STOPRING FL 110 A22 2
    P04 71822710 BOTTOM PLATE PISTON FL 110 MK2 HD 1
    P05 01745021 K CIRCLIP 97 DIN 472 (102.5x3.0) 1
    P06 71870220 K O-RING PISTON BOTTOM 110 1
    P07 71847301 PISTON EYE SPH. FL 110 MK2 L=075 GR 1
    P08 01226538 K O-RING 91.67 X 3.53 MM NBR 1
    P09 01770085 K SPHERICAL BEARING D.50 DO GREASED 1
    P10 01770560 K CIRCLIP 75 GE 50 DO DIN 472 1
    P11 71875012 PIN ROUND HEAD GROOVED 8x15 mm 2
    P12 56288044 K GREASE NIPPLE M8x1 DIN 71412 1
    P13 01317670 K GREASER PROTECTION CAP 1

    S21 74614511 STAGE FL2 129-1510-HD-HC 1


    S22 71808129 K PACKSET FL 129/HP 129 TANDEM SEAL 1
    S23 71807131 K SLIDER FL 129 (2 X 1/2) A35 1
    S24 71851129 K OUTER STOPRING FL 129 A22 2
    S25 71852129 K LIFTRING FL 129 A22 1
    S11 74615511 STAGE FL2 149-1510-HD-HC 1
    S12 71808149 K PACKSET FL 149/HP 150 TANDEM SEAL 1
    S13 71807151 K SLIDER FL 149 A35 1
    S14 71851149 K OUTER STOPRING FL 149 A22 1
    S15 71852149 K LIFTRING FL 149 A22 1
    B01 74516510 BASE FL2 169-1549-4/4BSAE-190-HD 1
    B02 71802169 K PACKSET FL 169 1
    B03 71825425 BOTTOM PLATE FL2 169 1
    B04 71870035 K SEAL BOTTOM PLATE FL 169 1
    B05 71820169 LOCKING PLATE FL 169 3
    B06 01732055 K BOLT HEX M8X20X1.25 SET 6PCS 1
    B07 01732559 K WASHER SPRING M8 SET 6PCS 1

    Seal kit complete Notes


    71908531 K Consists of all packsets with The inner, outer stoprings and liftrings are pre-mounted in the grooves
    packset grease and O-rings on spare stages and pistons. Therefore, when ordering new tubes, it is
    not required to order stoprings separately.

    For repair instructions see: CYL-0041. Serial no. is located on type plate and below type plate support.
    Subject to change without notice, no rights reserved Page 2/2 DO-E 70535211 / 2014-9-19 / RV AA

    You might also like