Scribd
Upload
161 views1 page

Decimator Firmware Remote Upgrade Instructions

The document provides instructions for updating the firmware on a Decimator D3 device. It explains that users can check an FTP site for new firmware releases, which will have a higher version number. It then lists the steps to download the latest firmware TAR file from the FTP site and install it through the Decimator's web interface by browsing to the TAR file and flashing it onto the device. Contact information is provided for any support questions.

Uploaded by

Eduard Lemba
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
161 views1 page

Decimator Firmware Remote Upgrade Instructions

The document provides instructions for updating the firmware on a Decimator D3 device. It explains that users can check an FTP site for new firmware releases, which will have a higher version number. It then lists the steps to download the latest firmware TAR file from the FTP site and install it through the Decimator's web interface by browsing to the TAR file and flashing it onto the device. Contact information is provided for any support questions.

Uploaded by

Eduard Lemba
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SED Systems’ Decimator D3 Firmware Upgrade Process

Your Decimator D3 was shipped to you with the latest firmware. When new firmware(s)
are released they may take the form of bug fixes and/or additional functionality. You can
check the below FTP site periodically to see if there is newer firmware available for your
Decimator D3. You can check your current Decimator firmware version by clicking on
“System” then “Status” and read the software version in your Decimator GUI. Any newer
firmware on the FTP site will be the TAR file and it will have a higher numeric version
number.

Downloading:

1. The new firmware can be obtained from our FTP server at ftp.sedsystems.ca

username: decimator
password: SED*Decimator*03

2. Change the directory to decimator/firmware/


3. Download the latest TAR firmware

Installing:

1. Navigate a browser to the Decimator's configuration UI at <decimator address>/cgi-bin/


wcm.cgi
2. Login (admin/admin)
3. Click on the 'Firmware' tab
4. Browse... to the TAR file obtained from the FTP site
5. Upload the file, and flash onto the card when prompted to do so.

Please contact SED Systems Customer Support with any questions you may have.

To contact our Customer Service Group directly:

Email: [email protected]
Phone: (306) 933-1605
Fax: (306) 933-1695

You might also like