Scribd
Upload
151 views3 pages

MAT 3421 MCGB - Data Sheet For Suppliers Old MAT No.: 362

This document provides information on MAT 3421, an abrasion resistant cast iron alloyed with chromium. It lists the material's properties, chemical composition limits, mechanical properties, alternative international standards, delivery conditions, and revision history. The material has high abrasion resistance from a eutectic or hypoeutectic structure with iron-chromium carbides in a martensitic matrix. Its composition is within specified limits to achieve this structure.

Uploaded by

Diógenes da Silva Pereira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
151 views3 pages

MAT 3421 MCGB - Data Sheet For Suppliers Old MAT No.: 362

This document provides information on MAT 3421, an abrasion resistant cast iron alloyed with chromium. It lists the material's properties, chemical composition limits, mechanical properties, alternative international standards, delivery conditions, and revision history. The material has high abrasion resistance from a eutectic or hypoeutectic structure with iron-chromium carbides in a martensitic matrix. Its composition is within specified limits to achieve this structure.

Uploaded by

Diógenes da Silva Pereira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

MAT 3421

MCGB - DATA SHEET FOR SUPPLIERS Old MAT No.: 362, -, -


Abrasion Resistant Cast Iron, Cr-alloyed
(Ducrodan)
For more information contact FLSmidth

PROPERTIES:
Chromium alloyed cast iron with high abrasion resistance.
To ensure the highest possible impact resistance, the structure has to be eutectic or slightly hypoeutectic,
with Fe-Cr-carbides in a martensitic matrix.
The composition limitation indicated below can be used as guidance to obtain a hypoeutectic or eutectic
structure.
The composition is well inside the limits stated in the alternative standards referred to.

Instructions:
FLS, Instruction V-2821-xx
Cast lining parts

CHEMICAL COMPOSITION:
% C max or % Si max or % Mn max or % P max or % S max or % N max or % Al min or
Dim. mm
range range range range range range range
2.6-2.8 1.0 1.0 - - - -

% Cr max or % Mo max or % Ni max or % V max or % Nb max % Ti max or % Cu max or % Other max


Dim. mm
range range range range or range range range or range

25-27 - - - - - - -
It is recommended to keep the composition within this range to obtain an eutectic or hypoeutectic structure.

MECHANICAL PROPERTIES AT ROOM TEMPERATURE:


Tensile Imp. Energy
Yield Strength Elong. M.Elas
Strength Area Reduction Hardness KV, Min
Condi- Dim. MPa % GPa
MPa
tion mm
Rm Re A5 Z Z⊥ E HRc HB HV °C J
HT - - - - - - - 390-450
HT = Heat Treated. A possible heat treatment is given in EN 12593 (2000): Soft annealing.
Another possible heat treatment is suggested in V 2821-xx and should be treated as guidance.

Rev_No : 4,0 Issue Date: 01-06-1998 Prepared by: BKL


Revision Date: 12-06-2014 Approved by: KHN Page 1 of 3
MAT 3421

MCGB - DATA SHEET FOR SUPPLIERS Old MAT No.: 362, -, -


Abrasion Resistant Cast Iron, Cr-alloyed
(Ducrodan)
For more information contact FLSmidth

ALTERNATIVE INTERNATIONAL STANDARDS TO MAT 3421


Standard Type of Material Name of Material Material No.
ASTM A 532/A 532M (2010) Casting Class III, Type A .
EN 12513 (2011) Casting EN-GJN-HB555(XCr23) 5.5610
GB/T 8263 (1999) KmTBCr26

ASTM : American Society for Testing Materials EN: European Norm


BS: British Standard ISO: International Organisation for Standardization
DIN: Deutsche Industrie-Norm JIS: Japanese Industrial Standard
GB/T: Chinese Standard

DELIVERY CONDITIONS:
To be delivered according to Instruction V 2821-xx.
When taking in new suppliers a sample sized 100x100x80 mm must be shipped to the RD-PD-Metallurgy
department for approval before a purchase order can be placed. The sample must be followed by
documentation stating chemical composition, hardness and heat treatment.

Rev_No : 4,0 Issue Date: 01-06-1998 Prepared by: BKL


Revision Date: 12-06-2014 Approved by: KHN Page 2 of 3
MAT 3421

MCGB - DATA SHEET FOR SUPPLIERS Old MAT No.: 362, -, -


Abrasion Resistant Cast Iron, Cr-alloyed
(Ducrodan)
For more information contact FLSmidth

Revisions:
Rev. No. Rev. Date Change Responsible
0,60 10-02-2002 Prepared & Approved changed. AnJo
References to Alternative Standards added to supplier version.
Composition limits have been constricted
0,70 15-01-2004 Standards updated. Rev_no updated: An extra decimal place is added. AsK
1,0 08-06-2005 Rev. no. changed to 1,0 AsK
2,0 29-10-2007 Alternative international standard revised AsK
3,0 19-03-2010 Alternative Chinese standard added. Footer updated. AsK
4,0 12-06-2014 Alternative standard updated. Name of alternative EN material is now BKL
specified in accordance with hardness in HB.

Rev_No : 4,0 Issue Date: 01-06-1998 Prepared by: BKL


Revision Date: 12-06-2014 Approved by: KHN Page 3 of 3

You might also like