Scribd
Upload
986 views2 pages

Unit Test 1 Question Paper

The document provides instructions for an online examination for a unit test, stating that it is 30 minutes long, students must ensure their details are correct, and they must answer a minimum of 20 out of 25 multiple choice questions, being responsible for logging in on time with a fully charged device. The test then provides 25 multiple choice questions related to automation systems, Programmable Logic Controllers (PLCs), and their components and programming. Students must select one answer for each question and click submit once completed.

Uploaded by

rashmi patil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
986 views2 pages

Unit Test 1 Question Paper

The document provides instructions for an online examination for a unit test, stating that it is 30 minutes long, students must ensure their details are correct, and they must answer a minimum of 20 out of 25 multiple choice questions, being responsible for logging in on time with a fully charged device. The test then provides 25 multiple choice questions related to automation systems, Programmable Logic Controllers (PLCs), and their components and programming. Students must select one answer for each question and click submit once completed.

Uploaded by

rashmi patil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

UNIT TEST -I

Government Polytechnic, Pen


Instrumentation and Control Department
Sem: V Subject: IAU (22534) Date: 10/11/2021
Time: 30 mins Total Marks: 20
________________________________________________________________________
Instructions for Students
1. Duration for online examination is 30 min.
2. Students should ensure that they have entered their correct details before starting the examination.
3. Each questions carries 1 mark.
4. Solve minimum 20 questions compulsorily out of total 25 questions.
5. Students with duplicate record not consider.
6. It is the whole responsibility of student to login in time and keep the phone /laptop/desktop in condition
(fully charged) during the examination.
7. Students are allowed to submit test only once.
8. Students should make sure that they have correctly attempted all the questions before submission.
9. Students should make sure that they have clicked on submit button to complete the test successfully.
______________________________________________________________________________________
1. The word Automation was first used at the ____________ company.
a)Siemens b) Ford motor c) Rockwell d) Allen-Bradley
2. Automation system is also called as _________.
a) Process automation b) Automatic technique c) Manual process d) Manual process
3. SCADA stands for ________.
a) Supervisory control and data acquisition system b) Superior control and data acquisition system
c) Supervisory control and data appear system d) None of the above
4. DCS stands for ________.
a) Distributed control system b) Disturbed control server
c) Digital control system d) None of the above
5. Which of the following is an automation system?
a) Robotics b) Numerically controlled machines c) Warehouses d) All the above
6. The Boolean representation of this PLC program is:

a)ABC + D b)C + (A + B)D c)C + D(A + B) d)C(AB’ + D’)


7. The below rung would represent what Boolean equation?

a)X • Y = Z b)X + Y = Z c)X • Y’ = Z d)None of the above.


8. Solenoids, lamps, motors are connected to:
a)Analog output. b)Digital output. c)Analog input. d)Digital input
9. Normally open contacts are open when:
a)When Input is not energized b)When the input is energized
c)When input is higher than 20 volts d)None of these
10. What is the largest integer number that a PLC counter function can reach if it uses a 16 bit register?
a)32,768 b)65,535 c)65,536 d)65,537
11. An NOR function implemented in ladder logic uses:
a)Normally-closed contacts in series b)Normally-open contacts in series
c)Normally-open contacts in parallel d)Normally-closed contacts in parallel
12. An OR function implemented in ladder logic uses:
a)Normally-closed contacts in series b)Normally-open contacts in series
c)Normally-open contacts in parallel d)Normally-closed contacts in parallel
13. Identify the problem in this motor control PLC program:

a)Start contact b)Seal-in contact c)Stop contact d)Power source


14. The programmable logic controllers are used in __________
a)Manufacturing b)Automation c)Both a and b d)None of the above
15. What are the components that make the programmable logic controller work?
a)Input and output module b)CPU c)Power supply d)All of the above
16. What are the types of programmable logic controllers?
a)Fixed, uniform PLC b)Modular, uniform PLC
c)Fixed and Modular PLC d)Fixed and Modular PLC
17. Which is the first PLC model?
a)PLC 084 b)PLC 085 c)PLC 086 d)None of the above
18. The relays consist of __________
a)Control circuit b)Load circuit c)Both a and b d)None of the above
19. Who invented the Programmable Logic Controller (PLC)?
a)Jonas Wenstrom b)Dick Morley c)Thomas Davenport d)None of the above
20. The advantages of PLC are ______
a)Which one is the PLC Easy maintenance b)Reliability is high
c)Small in size d)All of the above
21. Which is the following programming language?
a)HMI b)MMI c)FBD d)None of the above
22. The standard form of PLC is ______
a)Programmable Logic Controller b)Programmable Load Controller
c)Pressure Load Controller d)None of the above
23. The ladder logic in PLC consists of _________
a)Logic gates b)Relay contacts and coils c)Functional blocks d)Relays
24. Which type of memory is used in PLC?
a)Random Access Memory b)Read Only Memory
c)Both a and b d)None of the above
25. A PLC consists of
a)Processor Unit b)Program Memory
c)Input/output Section, Display Device d)All of the above

You might also like