Globe Control Valves For Cryogenic Service

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

GLOBE CONTROL VALVES

FOR CRYOGENIC
SERVICE
1-6940 Cryo valves are especially designed for
cryogenic service. The construction is the same of 1
-6941 and 1-6943 standard globe valves with the
exception of the extension bonnet with cold box to
keep the cryogenic liquid out of the packing area
allowing buildup of gas in the warmer bonnet area.

MAIN FEATURES
- Wide range of sizes: from DN 3/4” to DN 24”;
- Ratings from ANSI 150 up to ANSI 2500 (B10 to B100
for EN ratings);
- Quick change design;
- High flow capacity thanks to optimized body shape
design;
- High rangeability thanks to CCF plug design;
- Up to sealing class VI IEC 60534-4 with Soft seat ring
insert;
- Unbalanced Contoured plug version available up to
DN 6”;

GENERAL DATA
BODY
- Type: globe, straight way single port;
- Construction: cast, forged for DN 3/4" and 1" ANSI
900÷2500;
- Materials: wide material selection (from ASME and EN
standards) is available, according to material tables.
Other materials are available on request;
- Sizes: 3/4” through 24";
- Connections:
• ANSI, EN flanged
1-6943 SERIES VALVE WITH 1-X-252 SERIES D63 TYPE • BW ANSI B16.25
PNEUMATIC DIAPHRAGM ACTUATOR PROVIDED • UNI EN 12627 butt welding ends
WITH SIDE-MOUNTED HANDWHEEL (OPTIONAL). • Socket welding up to NPS 2”
- Ratings: according to EN 12516-1 and ASME B16.34
materials
• PN 10/16/25/40/63/100
• ANSI 150/300/600 up to DN 24”, ANSI 900/1500
(up to DN 12”), ANSI 2500 (up to DN 4”)
FLOW DIRECTION
Flow under the plug.
BONNET
- Type: extension bonnet with cold box;
- Constructions: flanged type, fabricated by welding
- Materials: same as body;
- Low Emission certified packings are available on
request.

-2-
PLUG CAGE
- Sizes: full or reduced ports as per 1-6941 and 1-6943 - Constructions: rolled or forged cylinder, drilled or
STD Cv table; V-ported, tightened between body and bonnet;
- Type: - Materials: see materials of construction table.
• Balanced and unbalanced, cage guided: port 1/2” STEM PACKINGS
to 24”, for 1-6943; Two packing types are available:
• Contoured unbalanced: up to DN 6”, for 1-6941. - Pure PTFE rings;
- Materials: see table of materials; - Special low emission EXPANDED GRAPHITE based
packing TA-Luft certified with Live Loading System;
FLOW CHARACTERISTIC All packings are equipped with scraper to protect stuffing
- Linear; box internal components from external icing, and additional
- Equal percentage. seal bushing.
SEAT SPECIAL EXECUTIONS AVAILABLE ON REQUEST
- Mounting: free fitted in the body without screwing or - Double packing with leak off connection;
forcing. Centered in the cage granting alignment with
the plug, body and seat. Coupling sealed by means of LEAKAGE CLASSES
a flat gasket; In accordance with IEC 60534-4 leakage classes, up to
- Materials: see materials of construction table. class VI for both balanced and unbalanced construction up
to maximum admissible working temperatures.

1-6941 CONTOURED PLUG VALVE ASSEMBLY

ITEM PART NAME


1 BODY
2 BONNET
3 BODY STUD
4 NUT
5 VALVE PLUG
6 SEAT
7 STEM
8 GASKET
9 GUIDE
12 PIN
14 GASKET
27 PACKING
51 SEAL RING
52 PIN (up to port 3")
53 PLUG POST (up to port 3")
62 GUIDE BUSHING (if any)
63 STOP RING (if any)

-3-
1-6943 CAGE-GUIDED PLUG VALVE ASSEMBLY

UNBALANCED PLUG BALANCED PLUG WITH RETAINING RING

BALANCED PLUG WITH SCREWS


(OVER PORT 2")

BODY-BONNET CONNECTION
WITH ADAPTER

ITEM PART NAME ITEM PART NAME


1 BODY 16 GASKET (if any)
2 EXTENSION BONNET 19 SEAL RING
3 STUD 27 PACKING
4 NUT 32 SEAL RING (if any)
5 VALVE PLUG 62 GUIDE BUSHING (if any)
6 SEAT 63 STOP RING (if any)
7 STEM ASSEMBLY 111 FLANGE (if any)
8 GASKET 112 SCREW (if any)
9 CAGE 114 STOP WASHER (if any)
11 ADAPTER (if any) 115 RETAINING RING (if any)
12 PIN 116 RING PLUG (if any)

-4-
1-6941 series MATERIALS OF CONSTRUCTION

BASIC CLASS
ITEM PART NAME
G H
1 BODY SA 351 CF8M SA 351 CF3M
SA 351 CF8M SA 351 CF3M
2 BONNET
SA 479 316 SA 479 316L
3 BODY STUD SA 479 XM-19
4 NUT SA 194 Gr.8
5 VALVE PLUG
A 479 316 A 479 316L
6 SEAT
(1)
7 STEM A 479 316 A 479 316L (1)
8 GASKET AISI 321 + GRAPHITE
9 GUIDE A 351 CF3M Cr Plated
12 PIN A 479 304 A 479 316L
14 GASKET AISI 321 + GRAPHITE
27 PACKING SEE PARCOL BULLETIN 1-VII
51 SEAL RING PTFE
52 PIN (up to port 3") A 479 304 A 479 316L
53 PLUG POST (up to port 3") A 479 316 A 479 316L
62 GUIDE BUSHING (if any) AISI 316L + antifriction treatment
63 STOP RING (if any) INCONEL X-750 SPRING TEMP.

1-6943 series MATERIALS OF CONSTRUCTION

BASIC CLASS
ITEM PART NAME
G H
1 BODY SA 351 CF8M SA 351 CF3M
SA 351 CF8M SA 351 CF3M
2 BONNET
SA 479 316 SA 479 316L
3 BODY STUD SA 479 XM-19
4 NUT SA 194 Gr.8
5 PLUG
A 479 316 A 479 316L
6 SEAT
(1)
7 STEM A 479 316 A 479 316L (1)
8 GASKET AISI 321 + GRAPHITE
A 182 F316 A 182 F316L
9 CAGE
Cr plated Cr plated
11 ADAPTER - if any A 479 316L
12 PIN A 479 304
13 SPACER RING - if any A 182 F316L
14 GASKET AISI 321 + GRAPHITE
15 SPACER - if any A 182 F316L
16 GASKET - if any AISI 321 + GRAPHITE
19 SEAL RING PTFE + PFA
27 PACKING SEE PARCOL BULLETIN 1-VII
32 SEAL RING (if any) Graphite loaded PTFE
62 GUIDE BUSHING (if any) AISI 316L + antifriction treatment VEGA CRYO CONTROL VALVE AFTER TYPE TEST
63 STOP RING (if any) INCONEL X-750 SPRING TEMP. ON LIQUID NITROGEN
111 FLANGE A 479 316L
112 SCREW A 479 316
114 STOP WASHER A 479 304 ANNEALED
115 RETAINING RING X12CrNi17-7
116 RING PLUG A 479 316

All components made of A 479 316 or A 479 316L can be replaced by double marking material A 479 316/316L without notice
(1)
A 479 XM-19-HS when low emission packing is provided.
TRIM OPTIONS

LIMIPHON DISK STACK

1-9111 CAGE-GUIDED PLUG AND LIMIPHON DISK STACK

ITEM PART NAME MATERIALS


1 BODY SA 351 CF8M SA 351 CF3M
SA 351 CF8M SA 351 CF3M
2 EXTENSION BONNET
SA 479 316 SA 479 316L
3 STUD SA 479 XM-19
4 NUT SA 194 Gr.8
5 VALVE PLUG
A 479 316 A 479 316L
6 SEAT
7 STEM ASSEMBLY A 479 316 (1) A 479 316L (1)
8 GASKET AISI 321 + GRAPHITE
12 PIN A 479 304
14 GASKET AISI 321 + GRAPHITE
19 SEAL RING PTFE + PFA
50 LIMIPHON DISK STACK A 479 316
A 182 F316 A 182 F316L
56 CAGE
Cr plated Cr plated
62 GUIDE BUSHING AISI 316L + antifriction treatment
63 STOP RING INCONEL X-750 SPRING TEMP.
PACKING

GLE TYPE TA-LUFT CERTIFIED

ITEM PART NAME MATERIALS


17 PACKING FLANGE AISI 316
23 STUD ASTM A193 B8 Cl.1
24 NUT ASTM A194 Gr.8
28 BUSHING AISI 316L
252 PACKING FOLLOWER AISI 316
EXPANDED GRAPHITE
255 PACKING BOX PURE PTFE
(low emission certified)
257 INTERMEDIATE RING AISI 316
INCONEL 718
280 BELLEVILLE WASHER
HARDENED 390 HB
281 SEAL RING NB-70
282 GUIDE BUSHING Aluminuim Bronze
283 SEAL RING NB-70
300 SCRAPER PTFE

GLE TYPE SEALING RINGS

LIVE LOADING DETAIL

You might also like