I Ntifoam: Product Bulletin

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Product Bulletin

DI-ANTIFOAM™ DI-ANTIFOAM is a silicone-fluid emulsion that effectively controls


foam in DIPRO systems mixed in calcium chloride, magnesium
chloride, calcium bromide and zinc bromide brines.

Physical appearance.......................... Milky white emulsion


TYPICAL PHYSICAL
Odor ................................................... Slight
PROPERTIES
Specific gravity .................................. 1.007
Solubility in water ............................. 100%

DI-ANTIFOAM functions as an Treatment levels are


APPLICATIONS antifoaming agent in the DIPRO normally 0.03 gal/bbl, or as
System. required to control foaming for
reservoir drill-in fluid
applications.
• Reduces foam in viscous, • Does not require any
ADVANTAGES divalent brines. specialized mixing
equipment.

Bioassay information is Handle as an industrial


TOXICITY
available upon request. chemical, wearing protective
AND HANDLING
equipment and observing the
precautions as described on the
Material Safety Data Sheet
(MSDS). Also observe the
health hazard information and
emergency and first aid
procedures described on the
MSDS.

DI-ANTIFOAM is available in 2-gal


PACKAGING
pails.
AND STORAGE

This material is supplied solely for informational purposes and


M-I L. L. C. makes no guarantees or warranties, either expressed or
implied, with respect to the accuracy or use of this data. All
product warranties and guarantees shall be governed by the
Standard Terms of Sale.

M-I L. L. C
A Smith/Schlumberger Company
P.O. Box 721110 Tel: 281-561-1300
©2000 M-I L. L. C. All rights reserved.
™ DI-ANTIFOAM and D IP RO are trademarks of M-I L. L. C. Houston, Texas 77272-1110 Fax: 281-561-7240
MIC-10450 11/00 http://www.midf.com E-mail: [email protected]

You might also like