Residential Masonry Fence/Wall Details

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

Residential

Masonry
Fence/Wall
Details
CITY OF SCOTTSDALE
SUBMITTAL
REQUIREMENTS
FOR RESIDENTIAL
SIX (6) FOOT MASONRY
WALLS

This standard includes the minimum B. PERMIT AND PLAN REQUIRMENTS


requirements for construction of residential 1. Provide a plot plan (see attached example)
masonry walls and fences on single-family showing the street(s), property lines, lot
residential lots located south of Shea Blvd dimensions, location of all existing
and west of 122nd street. A building permit structures and the location of the fence.
is required for the construction of new List the lineal footage of the fence to be
masonry walls three (3) feet or taller or for built. You may contact the City Records
the replacement of an existing fence. This Department (480-312-2356) to verify if
standard does not include the construction there is an existing site plan on file for your
of retaining walls. This should not be property. If one is not available, you may
considered a complete list of code obtain a copy of your subdivision lot
requirements. Inspections must be passed showing the lot dimensions and any
before the work is considered completed by easements on your property.
the City of Scottsdale. 2. The attached building plans are for your
use. You cannot exceed the fence/wall
A. LOCATION height dimensions that are shown.
C. INSPECTION REQUIREMENTS
Fences, retaining walls and associated footings You will receive an inspection card that
are permitted to be constructed on/or within lists in detail the required inspections. The
property lines. The city of Scottsdale does not following list is for your information and
get involved in property line disputes related to may vary depending on what you will be
fence and footing locations or fence ownership. including in your building.
These disputes are civil matters and must be 1. A fence footing inspection.
resolved between the concerned parties. Walls 2. A masonry grout inspection
and fences shall not exceed 3 ft. in height located 3. A masonry bond beam inspection
within the required front yard. The fence height is 4. A fence final
measured from natural grade on the inside of the
enclosure.NOTE: setbacks are measured from ABBREVIATIONS:
property line. P.U.E. = PUBLIC UTILITY EASEMENT
Planning and Zoning 480-312-7083 W/N=WITHIN
Request Line 480-312-5796 O.C=ONCENTER
Development Services 480-312-2500 PRESS.=PRESSURE TREATED
Inspection Services 480-312-5750

1
Revised 07*24*2002

You might also like