Scribd Logo
Upload

Welcome to Scribd!

  • 25 views

    PESGNC - STD App

    Uploaded by

    Namit Nahar
    The document outlines a 4-step standard application process for painting steel surfaces with Steel Guard Nano Coat primer followed by a top coat. Step 1 involves thoroughly cleaning and preparing the steel surface through hand scraping, wire brushing, and sanding to remove all old paint, rust, and other impurities. Step 2 is the application of a single 0.2-2 micron coat of Steel Guard Nano Coat primer using a brush, dip, or spray method. Step 3 involves applying a 40-50 micron epoxy primer coat. Step 4 is the application of a 40-50 micron top coat of enamel, epoxy, or PU paint. Each coat is applied using a brush or spray

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PESGNC - STD App

    Uploaded by

    Namit Nahar
    25 views1 page
    The document outlines a 4-step standard application process for painting steel surfaces with Steel Guard Nano Coat primer followed by a top coat. Step 1 involves thoroughly cleaning and preparing the steel surface through hand scraping, wire brushing, and sanding to remove all old paint, rust, and other impurities. Step 2 is the application of a single 0.2-2 micron coat of Steel Guard Nano Coat primer using a brush, dip, or spray method. Step 3 involves applying a 40-50 micron epoxy primer coat. Step 4 is the application of a 40-50 micron top coat of enamel, epoxy, or PU paint. Each coat is applied using a brush or spray

    Original Title

    PESGNC_Std App

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document outlines a 4-step standard application process for painting steel surfaces with Steel Guard Nano Coat primer followed by a top coat. Step 1 involves thoroughly cleaning and preparing the steel surface through hand scraping, wire brushing, and sanding to remove all old paint, rust, and other impurities. Step 2 is the application of a single 0.2-2 micron coat of Steel Guard Nano Coat primer using a brush, dip, or spray method. Step 3 involves applying a 40-50 micron epoxy primer coat. Step 4 is the application of a 40-50 micron top coat of enamel, epoxy, or PU paint. Each coat is applied using a brush or spray

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    25 views1 page

    PESGNC - STD App

    Uploaded by

    Namit Nahar
    The document outlines a 4-step standard application process for painting steel surfaces with Steel Guard Nano Coat primer followed by a top coat. Step 1 involves thoroughly cleaning and preparing the steel surface through hand scraping, wire brushing, and sanding to remove all old paint, rust, and other impurities. Step 2 is the application of a single 0.2-2 micron coat of Steel Guard Nano Coat primer using a brush, dip, or spray method. Step 3 involves applying a 40-50 micron epoxy primer coat. Step 4 is the application of a 40-50 micron top coat of enamel, epoxy, or PU paint. Each coat is applied using a brush or spray

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    PRAMUKH ENTERPRISES

    Flow Chart – Steel Guard Nano Coat Standard Application process followed by Painting
    STEPS PROCESS SURFACE PREPARATION METHOD MICRONS DRYING METHOD CURING PERIOD INSPECTION
    CLEANING & APPLICATION TOOLS (THICKNESS) & TIME REMARK
    01 STEEL SURFACE PREPARATION HAND TOOL:
    • Scrap out completely old & existing paint, Scraping, Chipping, Wire Brush,
    rust and other foreign matter from the steel Sanding with emery paper No. 80,
    surface. 120 cross method.
    (All impurities like oil, grease should be POWER TOOL:
    removed completely from the steel surface Angle grinder with wire cup-brush,
    before application of Steel Guard Nano Coat) Sand blasting, grit blasting etc.
    *Recommendation: (Wipe the steel surface with cotton
    Steel Guard nano coat make De-Greaser 4599 cloth before application of Steel
    is recommended for degreasing the surface. Guard Nano Coat)
    02 STEEL GUARD NANO COAT APPLICATION TOOL: 0.2 – 2 Dry Method: 06-08Hrs.
    Application: • BRUSH, DIP, SPRAY (AIR LESS) MICRON NATURAL, FORCE Compulsory
    • APPLY SINGLE COAT ONLY (USE ONLY PLASTIC MATERIAL Dry Time: Min 30 *Strictly avoid
    (DO NOT USE CLOTH FOR APPLICATION) CONTAINER WHILE APPLYING & mins & Max 01Hr water contact
    STORAGE) Depending on until primer
    atmospheric application.
    condition.
    03 PRIMER APPLICATION TOOL: 40-50 AS PER PAINT AS PER PAINT
    • EPOXY PRIMER BRUSH, SPRAY MICRON MANUFATURES MANUFATURES
    SINGLE COAT TECHNICAL DATA TECHNICAL
    SHEET DATA SHEET
    04 TOP COAT APPLICATION TOOL: 40-50 AS PER PAINT AS PER PAINT
    • ENAMAL, EPOXY, PU PAINT BRUSH, SPRAY MICRON MANUFATURES MANUFATURES
    SINGLE COAT TECHNICAL DATA TECHNICAL
    SHEET DATA SHEET
    Disclaimer: The content of this documentation is based on our experience with the product. Altron Chemicals & Pramukh Enterprises guarant ees the quality of its products but expressly disclaims all liability if the user does not follow the recommendations and conditions of
    use of the products, especially exclusively in the case of faulty application, application by untrained personnel, use of products not compatible with Altron Chemicals & Pramukh Enterprises products, or adverse weather conditions For more information, consult the safety data
    sheet and user guide. For the most recent version of our data sheet, consult with our develoment team. CUSTOMER CARE CONTACT NO. +91-93255-44995 (MON – SAT 10.00AM – 6.30PM) , +91-93727-22308/80 (MON – SAT 10.00AM – 6.30PM)
    [email protected] www.steelguardnanocoat.com

    PESGNC_Std App_Ver.2018-19.1.1 – PRAMUKH ENTERPRISES

    You might also like