TVL – Computer System Servicing G12

Name: ______________________________________ Date: ____________________

Grade: ______________________________________ Section: ___________________

Quarter: I Week: 5 SSLM No. 5 ELC(s): Perform copper cable splicing

ELC Code: TLE_IACSS9-12SUCN-IVa-j33
 Objective: Identify T568A and T568B Wiring standard, and
necessary network materials, tools.
 Title of Textbook/LM to Study: TVL 12 SLM Computer System Servicing
(CSS), Page 12-16
 Chapter: ___ Pages: ___ Topic: Ethernet Wiring Standard Basis

Let Us Discover

Tools

Crimping Tool is basically an RJ-45 or RJ-11 cable pinching tool that curls the
little wires inside so that they attach to the connector head. The crimping tool is used
on both computer network and landline telephone cable.

LAN Tester assists users in the installation and control of networks. It is

normally used by technical service professionals and network administrators.

Wire stripper designed to remove insulation or outer sheath of a cable.

Materials

UTP cable is commonly used for network cable especially for Ethernet cable.
Ethernet cables can be wired as straight through or crossover. The straight through is
the most common type and is used to connect computers to hubs or switches. You
most likely will find it when you go to your local computer store and buy a patch cable.

1 GSC-CID-LRMS-ESSLM, v.r. 03.00, Effective June 14, 2021

 RJ-45 connector is a plastic plug
that is used the ends of cables.68A and
T568B

Wiring Standard Basis

A RJ45 connector is a modular 8 position,

8 pin connector used for terminating
Cat5e patch cable or Cat6 cable. A pinout
is a specific arrangement of wires that
dictate how the connector is terminated.
There are two standards recognized by
ANSI, TIA and EIA for wiring Ethernet
cables. The first is the T568A wiring
standard and the second is T568B. T568B
has surpassed 568A and is seen as the
default wiring scheme for twisted pair
structured cabling.

T568A T568B

White Green White Orange

Green Orange
White Orange White Green
Blue Blue
White Blue White Blue
Orange Green
White Brown White Brown
Brown Brown

1. CROSSOVER CABLES - cable is

a type of Ethernet cable used to connect
computing devices together directly.

The purpose of a Crossover

Ethernet cable is to directly connect one
computer to another computer (or device)
without going through a router, switch or
hub.

Use crossover cables for the following

cabling:
• Switch to switch
• Switch to hub
• Hub to hub
• Router to router
• Router Ethernet port to PC NIC
• PC to PC

2 GSC-CID-LRMS-ESSLM, v.r. 03.00, Effective June 14, 2021

 2. Straight through cable is a
type of twisted pair cable that is
used in local area networks to
connect a computer to a network
hub such as a router. This type of
cable is also sometimes called a
patch cable and is an alternative to
wireless connections where one or
more computers access a router
through a wireless signal. On a
straight through cable, the wired
pins match. Straight through cable
use one wiring standard: both
ends use T568A wiring standard
or both ends use T568B wiring
standard. The following figure
shows a straight through cable of
which both ends are wired as the
T568B standard.

Use straight through Ethernet

cable for the following cabling:

● Switch to router
● Switch to PC or server
● Hub to PC or server

Pin name and function

1. Transmit Data Plus (TD+): The positive signal for the TD differential pair. The signal
contains the serial output data stream transmitted onto the network.
2. Transmit Data Minus (TD-): The negative signal for the TD differential pair.
This contains the same output as pin 1.
3. Receive Data Plus (RD+): The positive signal for the RD differential pair. The signal
contains the serial input data stream received from the network.
4. Not used.
5. Not used.
6. Receive Data Minus (RD-): The negative signal for the RD differential pair. The signal
contains the same input as pin 3.
7. Not used. Function Pin# Pin#
8. Not used. TX+ 1 1

TX- 2 2

RX+ 3 3

RX- 6 6

3 GSC-CID-LRMS-ESSLM, v.r. 03.00, Effective June 14, 2021

 Let Us Try

Directions: Read the statements carefully. Write T if the statement is true and F if it is false.
Write your answer in the space provided.

________1. Transmit Data Plus (TD+): The positive signal for the TD differential pair.
The signal contains the serial output data stream transmitted onto the network.
________2. Transmit Data Minus (TD-): The negative signal for the TD differential pair.
This contains the same output as pin 1.
________3. Receive Data Plus (RD+): The positive signal for the RD differential pair.
The signal contains the serial input data stream received from the network.
_________4. Receive Data Minus (RD-): The negative signal for the RD differential pair.
The signal contains the same input as pin 3.
_________5. Straight through cable is a type of twisted pair cable that is used in local area
networks to connect a computer to a network hub such as a router.
_________6. Use crossover cables for switch to switch.
_________7. Use straight through Ethernet cable for switch to router.
_________8. RJ-45 connector is a plastic plug that is used the ends of cables.68A and T568B
_________9. Crimping Tool is basically an RJ-45 or RJ-11 cable pinching tool that curls the
little wires inside so that they attach to the connector head.
________10. Wire stripper designed to remove insulation or outer sheath of a cable.

Directions: Give the T568A Color code

___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________

Let Us Do

Activity 2: THINK IT!

Directions: Briefly discuss the difference between crossover and straight through
cable according to its function or purpose?
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________

4 GSC-CID-LRMS-ESSLM, v.r. 03.00, Effective June 14, 2021

 Let Us Apply

Directions: Explain the statement below. Write your answer on a separate answer
sheet of paper.

1. How do you connect PC to router using Ethernet standards?

_________________________________________________________________
_________________________________________________________________
_____________.

2. Why do we need to understand the Ethernet standards and its code? Give at
least 2 reasons.
_________________________________________________________________
_________________________________________________________________
_____________.

Rubrics

Your output will be rated using the scoring rubric below:

Criteria Excellent Good Needs Unacceptable

(5) (4) improvement (2)
(3)
Direct to the Long answers No correct No answer at all
Content point with some answer
mistakes
Idea is clear and Idea has some With answer but No answer at all
Idea
concise mistakes not clear
Presented in Presented in Presented Presented but no
logical manner & logical manner & mostly with correct answer
Presentation with neatness with neatness errors and no and no neatness
neatness

5 GSC-CID-LRMS-ESSLM, v.r. 03.00, Effective June 14, 2021

 References

 MELC Code: TLE_IACSS9-12SUCN-IVa-j33

 TVL – Computer System Servicing G12

TLE Self Learning Module TVL – Computer System Servicing G12. Perform copper
cable splicing. Piquero, E. J., et.al. pp.12-16

SSLM Development Team

Writer: Elvis J. Piquero
Editors: Wilma M. Abendan; Marie-Berthe P. Pabale
Evaluator: Acel S. Monares
Illustrator: None
Creative Arts Designer: Reggie D. Galindez
Education Program Supervisor-EPP/TLE/TVL: Amalia C. Caballes
Education Program Supervisor – Learning Resources: Sally A. Palomo
Curriculum and Instruction Division Chief: Juliet F. Lastimosa
Asst. Schools Division Superintendent: Carlos G. Susarno, PhD
Schools Division Superintendent: Romelito G. Flores, CESO V

6 GSC-CID-LRMS-ESSLM, v.r. 03.00, Effective June 14, 2021