0% found this document useful (0 votes)
9 views1 page

Linear Static Analysis of Box Beam With Different Materials

The document describes a cantilever box beam subjected to a concentrated load and made of different materials. It provides material properties for steel, aluminum alloy, and magnesium alloy. It gives the beam dimensions and load. The tasks are to determine the displacement and stress of the beam for each material, compare the results, and prepare a presentation.

Uploaded by

Raja mitme
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
9 views1 page

Linear Static Analysis of Box Beam With Different Materials

The document describes a cantilever box beam subjected to a concentrated load and made of different materials. It provides material properties for steel, aluminum alloy, and magnesium alloy. It gives the beam dimensions and load. The tasks are to determine the displacement and stress of the beam for each material, compare the results, and prepare a presentation.

Uploaded by

Raja mitme
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Question 1:

The cantilever box beam is subjected to concentrated load as shown in


Figure1. The beam is made up the following different materials as shown table.

Material Properties:
Aluminium Magnesium
Properties Steel (SM45C)
Alloy 7068 Alloy (AZ91)
Young’s Modulus (N/m2) 207e9 71e9 45e9
Density ( Kg/m3) 7600 2770 1800
Poisson’s ratio 0.3 0.33 0.35

Dimensions of beam (m): 0.127 x 0.0254 x 0.0381 with wall thickness of


0.00254 mm
Concentrated Load: 4400 N

4400 N

a) Determine the Displacement and stress of Cantilever beam with


different materials. ( Note: Verify boundary and use equivalence option)
b) Compare the results and comments
Prepare the Power point presentation (ppt) of simulation model and results
and submit

You might also like