Scribd
Upload
35 views

Sensors and Signal Conditioning EEE-4021: Name: Dibyanshu Mohanty Reg. No.: 20BEE0401

LVDT stands for Linear Variable Differential Transformer. It is an electromechanical transducer that converts rectilinear displacement of an object into a proportional electrical signal. The LVDT has a primary coil and two secondary coils arranged around a movable iron core. An alternating current supplied to the primary coil induces voltages in the secondaries based on their mutual inductance with the primary, which varies with core position. The secondary voltages are connected in opposite phases so their difference voltage is the output, which increases linearly with core displacement. The experiment demonstrates this working by measuring the LVDT output voltage at different core positions and supply voltage/frequency values.

Uploaded by

Dibyanshu Mohanty
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
35 views

Sensors and Signal Conditioning EEE-4021: Name: Dibyanshu Mohanty Reg. No.: 20BEE0401

LVDT stands for Linear Variable Differential Transformer. It is an electromechanical transducer that converts rectilinear displacement of an object into a proportional electrical signal. The LVDT has a primary coil and two secondary coils arranged around a movable iron core. An alternating current supplied to the primary coil induces voltages in the secondaries based on their mutual inductance with the primary, which varies with core position. The secondary voltages are connected in opposite phases so their difference voltage is the output, which increases linearly with core displacement. The experiment demonstrates this working by measuring the LVDT output voltage at different core positions and supply voltage/frequency values.

Uploaded by

Dibyanshu Mohanty
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Sensors and Signal Conditioning EEE-4021

Name: Dibyanshu Mohanty


Reg. no.: 20BEE0401

EXPERIMENT-3

AIM:
To understand working principle of LVDT

THEORY:
LVDT is linear Variable Differential Transformer. It is electromechanical
transducer. It converts the rectilinear displacement of any object to which
it is coupled mechanically in electrical signal proportional to it.

PRINCIPLE:
An alternating current is connected to the primary. This current must be
of appropriate amplitude and frequency. It is also called as Primary
Excitation.
This current causes a voltage to be induced in each secondary
proportional to its mutual inductance with the primary. While the
frequency of induced voltage is same as that of excitation frequency, its
amplitude varies with the position of the iron core.
As the core moves, the voltages induced in the secondary's changes due
to change in mutual inductance. The coils are connected in series but in
opposite phase , so that the output voltage is the difference between the
two secondary voltages.
PROCEDURE:
• First you need to configure the LVDT. Click on ' Show panel' tab at
the right bottom for making the circuit, drag and drop the primary
coil, Armature and secondary coils at the locations shown on left
hand side.
• Now select No of Turns, peak to peak supply voltage and frequency
from the drag and drop menu, available below LVDT diagram. Click
on configure block to configure LVDT.
• Now click on the black rectangular core placed between primary
and secondary windings.
• Drag the core to left hand side and observe the effect on the output
magnitude. This can be observed on the time vs output voltage
waveform and on the Distance vs output voltage graph. The core
displacement is indicated in the square box below the diagram
• Drag the core to right hand side and observe the effect on the
output magnitude. Also observe the change in the phase.
• Repeat steps 2 to 4 by changing supply voltage keeping frequency
and no of turns constant. Study the effect on the output voltage. For
this click on blue colour 'Configure' tab in the right-side panel. You
need to select required parameter value from drop down menu.
After selecting the values click on green ' Configure' tab to set the
parameter values.
• Repeat steps 2 to 4 by changing supply frequency keeping and no
of turns constant. Study the effect on the output voltage.
• Now keep supply voltage and frequency constant. Change the no of
turns and observe the effect on the output voltage by repeating
steps 2 to 4.

OBSERVATION-1:
No. of turns = 1000
Supply Voltage (Vrms) = 5
Supply Frequency (Hz) = 1000
Observation Table:
Displacement (in mm) Voltage (Vo) -ve Displacement (in mm) Voltage (V0)
1 8.72 -1 8.72
2 17.38 -2 17.38
3 25.91 -3 25.91
4 34.24 -4 34.24
5 42.31 -5 42.31
6 50.05 -6 50.05
7 57.40 -7 57.40
8 64.29 -8 64.29
9 70.66 -9 70.66
10 76.43 -10 76.43

OBSERVATION-2:
No. of turns = 1000
Supply Voltage (Vrms) = 7
Supply Frequency (Hz) = 3000

Observation Table:
Displacement (in mm) Voltage (Vo) -ve Displacement (in mm) Voltage (V0)
1 36.64 -1 36.64
2 73.01 -2 73.01
3 108.82 -3 108.82
4 143.81 -4 143.81
5 177.70 -5 177.70
6 210.22 -6 210.22
7 241.08 -7 241.08
8 270.02 -8 270.02
9 296.75 -9 296.75
10 321.01 -10 321.01

Performing Least Square Analysis:


INFERENCE:
• We saw that as we move the core upwards i.e., in positive direction,
the output voltage becomes more positive and when we move the
core in downward direction the output voltage still becomes more
positive.
• Thus, the LVDT can be used as inductive sensor for calculating
displacement.

You might also like