Scribd
Upload
79 views3 pages

HA86E 2U Series Performance Characteristics: High Power Er/Yb Doped Fiber Amplifier

The document describes a high power Er/Yb doped fiber amplifier (HA86E 2U Series) that: 1) Adopts world-leading pump lasers and fiber for low power consumption and heat generation. 2) Provides perfect control of output power and monitoring of lasers and light path safety. 3) Can achieve single or multi-wavelength transmission for CATV, FTTH, and other network applications.

Uploaded by

rquinteros
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
79 views3 pages

HA86E 2U Series Performance Characteristics: High Power Er/Yb Doped Fiber Amplifier

The document describes a high power Er/Yb doped fiber amplifier (HA86E 2U Series) that: 1) Adopts world-leading pump lasers and fiber for low power consumption and heat generation. 2) Provides perfect control of output power and monitoring of lasers and light path safety. 3) Can achieve single or multi-wavelength transmission for CATV, FTTH, and other network applications.

Uploaded by

rquinteros
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

CATV

HA86E 2U Series High Power Er/Yb Doped Fiber Amplifier

Performance characteristics

Adopts world top brand pump lasers and the


OFS fiber of United States, advanced LG
switch low-power circuit design, greatly
reducing the overall power consumption and
heat.

Perfect APC, ACC, ATC control, users use in


different networks, good ventilation design
and temperature-controlled fan, ensure the
long life and high reliability of PUMP laser.

Using digital control chip, remote or local


output power adjustable.

Excellent protection circuit design, with light detection, optical return loss monitoring. Great
protection of lasers and light path safety.

Built-in low-noise preamplifier eliminates the need for cascaded EDFA, allowing input light
to be as low as -5dBm, greatly reducing CNR and MER degradation.

Demultiplexer for 1310/1490/1860nm EPON and GPON. It greatly facilitates network


applications with PON. Low noise figure (type ≤ 4.5dB, Max ≤ 5.0dB);

The total output optical power is optional: 2-10W (33-40dBm);

The front panel can be removed and replaced flexibly according to the number of output
ports; Can add a built-in optical switch module to facilitate the expansion of the device
function; Cooling fan supports online replacement;

The front panel LCD provides the operating parameters and alarms of the entire unit. RJ45
provides serial communication and SNMP network management interface; Carrier-grade
dual power hot backup, CPU assignable power.
Applications
The HA86E series high power amplifier is a high power multi-output optical fiber amplifier
with a gain spectrum bandwidth of 1535~1865nm. It is mainly designed for CATV or 1~8
continuous strip channels (ITU wavelength) applications. It provides a flexible, low-cost solution
for large-scale FTTH coverage of CATV systems in large and medium-sized cities.

HA86E can achieve single-wavelength cable TV transmission, CWDM single-fiber three-


wave, flat-gain type, DWDM; its reliable and excellent performance ratio between the main
application of FTTH, FTTB, DBS, MMDS, FTTX pon, is to build CATV large Medium-sized
optical fiber transmission network is an important equipment.

Block diagram

HA86E

Limit parameter
Technical parameters HA86E
Max wavelength 1535- 1865nm
Minimum input power - 10dBm
Max input power +10dBm
Limited working temperature -25℃ ~+70℃
Limited working voltage AC90~265V&DC30~72V&DC30~72V

Technical parameters
Technical parameters HA86E
Wavelength 1535- 1865nm
Input power -5dBm~+10dBm（normal input -2dBm~+5dBm）
Output power 33dBm~40dBm（WDM - 1dBm）
Output port SC: 16/32/64；LC: 32/64/128
Each output power 10~23dBm or customized
Noise ＜ 5.0dB（Pin=0dB）
Polarization dependence loss
＜ 0.3dB
(PDL)
Polarization dependence gain
＜ 0.4dB
(PDG)
Polarization mode dispersion
＜ 0.3dB
(PMD)
Pump leakage power ＜ -30dBm
Echo loss ≥ 86dB
Optical connector SC/APC&SC/UPC&LC/APC&LC/UPC
Supply voltage 220V(AC90V~265V)&110V(AC90V- 130V)&48V(DC30~72V)
Consumption ≤100w
Working temperature -5℃ ~+42℃
Storage temperature -40℃ ~+80℃
Working relative humidity 5~95%
Product net size 465(L)*480(W)*89(H)
Package dimension 640(L)*640(W)*200(H)

Model guide
HA86E2-Output port*Per port output power-Input optical connector+Main power supply
voltage+Sub power supply voltage+Output connector-with WDM+WDM
connector+OSW+Optical transmitter (Note: When the black box has no order requirement,
do not write).

HA86E2- * - - -

WDM(W) Built-in optical Transmitter (L)


Built-in optical switch (O)
WDM junction (Same input)
Output joint form (Same input)
Auxiliary power supply voltage (same main power supply voltage)
Main power supply voltage (2: AC220V; 1: AC110V; 4: DC48V optional)
Input connector form (SA: SC/APC; SU: SC/UPC; LA: LC/APC; LU: LC/UPC optional)
Per port output value (13~23dBm)
Number of output porta (SC: 16~64口; LC: 32~128口)
Example: HA86E2-16*22-SA24SA-WSP-OL
Explanation: This HA86E 2U device is the erbium and ytterbium Co-doped high power fiber
amplifier with 16 port output, each output 22dBm, input connector SC/APC, main power supply:
220V, sub powersupply: 48V, output connector SC/APC, with WDM, WDM connector SC/APC,
built-in OSW and optical transmitter.

Package & Label

1 pc/carton

You might also like