DF1 Master/Slave to

PROFIBUS DP Slave Gateway

5105-DFCM-PDPS
The ProLinx DF1 Master/Slave to PROFIBUS DP Slave Gateway
creates a powerful connection between devices on a PROFIBUS DP
network and DF1 devices. This stand-alone DIN-rail mounted
protocol gateway provides one serial port and one PROFIBUS DP
Slave.
The DF1 protocol driver supports Master or Slave implementations of
DF1 Master/Slave to the protocol on each DF1 port. All DF1 ports are individually
PROFIBUS DP Slave Gateway configurable.
5105-DFCM-PDPS The PROFIBUS DP Slave protocol driver supports the PROFIBUS
The DFCM-PDPS modules are the ideal solution for the V0 Slave implementation, providing powerful data transfer capability
many applications where PROFIBUS connectivity can be between the ProLinx module and Siemens PLCs or other hosts. User
used to integrate DF1 devices into a system. The configurable data mapping and DP port operation make the interface
PROFIBUS DP Master gateway is a powerful module an easy to use and powerful data transfer tool.
designed with Server support, enabling easy connection
to Rockwell Automation PLCs (CLX, SLC, PLC, CPLX, DF1 Master/Slave
and similar devices). In combination with the DF1 device The DF1 Master/Slave Protocol driver provides extensive support for
support, the module provides a very powerful interface to both Master and Slave implementations of the protocol. The serial
the many DF1 devices which are in use in the industrial port on the gateway is user-configurable to support the DF1 protocol
marketplace today. Applications for the module are (Master or Slave, Error Checking, Baud rate, etc).
found in most industries, especially Manufacturing, Oil General Parameters
and Gas, Electrical Power and Food Processing. Communication parameters Local Station ID: 0 to 254
Ports 1 to 3 Baud Rate: 110 to 115K baud
How to Contact Us: Sales and Support Stop Bits: 1
All ProSoft Technology® products are backed with Data Size: 8 bits
Parity: None, Even, Odd
unlimited technical support. Contact our worldwide RTS Timing delays: 0 to 65535 ms
Technical Support team directly by phone or email: Error Checking BCC and CRC
Asia Pacific Miscellaneous Full hardware handshaking control,
+603.7724.2080, [email protected] providing radio, smart modem and Multi-
Languages spoken include: Chinese, Japanese, English drop support
Floating point data supported
Europe – Middle East – Africa
+33 (0) 5.34.36.87.20, support.EMEA@prosoft- DF1 Master Protocol Specifications
technology.com The ports on the module can be individually configured as Master
Languages spoken include: French, English ports. When configured in master mode, the DFCM module is
capable of reading and writing data to remote DF1 devices.
North America
+1.661.716.5100, [email protected] DF1 Master Driver
Languages spoken include: English, Spanish DF1 Modes Full-Duplex – Master (Module generates
commands)
Latin America (Sales only) Half-Duplex – Polling
+1.281.298.9109, [email protected] Command List Up to 100 commands per Master port,
Languages spoken include: Spanish, English each fully-configurable for function, slave
address, register to/from addressing and
Brasil word/bit count
+55-11.5084.5178, [email protected] Polling of Command List User-configurable polling of commands,
Languages spoken include: Portuguese, English including disabled, continuous, and on
change of data (write only)
DF1 Slave Protocol Specifications Specification Description
The ports on the module can be individually configured to support the Dimensions Standard: 5.20H x 2.07W x 4.52D in.
Slave mode of the DF1 protocol. When in slave mode, the module (13.2cmH x 5.25cmW x 11.48cmD)
Extended: 5.20H x 2.73W x 4.52D in.
can accept DF1 commands from a master to read/write data stored
(13.2cmH x 6.934cmW x 11.48cmD)
in the module's internal registers.
LED Indicators Power and Module Status
DF1 Slave Driver Application Status
DF1 Modes Full Duplex – Slave (not peer mode) Serial Port Activity LED
Half Duplex – Polled Serial Activity and Error LED Status
Configurable parameters Data Table File Start (File N[x] 0 to 999) Configuration Serial Port DB-9M RS-232 only
per slave port Data Table File Size (1 to 1000 words) No hardware handshaking
Data Table location in database (0 to 3999) Ethernet Port (Ethernet RJ45 Connector
modules only) Link and Activity LED indicators
PROFIBUS DP Slave Application Serial Ports RS-232/422/485
The PROFIBUS DP Slave driver gives access to the ProLinx unit's RS-232 handshaking configurable
internal database via 244 bytes of Input data and 244 bytes of Output RS-422/485 screw termination included
data (maximum 400 bytes total). These Input and Output data blocks Serial Port Isolation 2500V RMS port signal isolation per UL
are mapped by the user within the ProLinx module's data memory 1577
3000V DC min. port to ground and port to
allowing the user maximum flexibility and data transfer with other
logic power isolation
protocols. Shipped with Each Unit Mini-DIN to DB-9M serial cables
General Parameters 4 ft RS-232 configuration cable
GSD File PRLX05A5.GSD 2.5mm screwdriver
Downloadable from ProSoft Technology CD (docs and Configuration utility)
web site RS-422/485 DB-9 to Screw Terminal
PROFIBUS Specifications Adaptor (1 or 4, depending on ports)
Communication parameters Baud Rate: 9.6 kbit/s – 12 Mbit/s
Supported I/O length 244 bytes Input data ProSoft Configuration Builder
244 bytes Output data ProSoft Configuration Builder (PCB) provides a quick and easy way
400 bytes total to manage module configuration files customized to meet your
Supported PROFIBUS DP PROFIBUS V0 Slave using Siemens SPC3 application needs. PCB is not only a powerful solution for new
features chipset configuration files, but also allows you to import information from
Freeze Mode
Sync Mode
previously installed (known working) configurations to new projects.
Auto Baud Setting
Configurable Parameters PROFIBUS Node Address: 1 to 125 Additional Products
Data byte swapping ProSoft Technology offers a full complement of hardware and
Action on loss of PROFIBUS connection software solutions for a wide variety of industrial communication
Comm Fail Timeout Multiplier platforms.
Status Data location in Internal Database
Visit our web site at http://www.prosoft-technology.com for a
General Specifications complete list of products.
The ProLinx Communication Modules provide connectivity for two or
more dissimilar network types. The modules, encased in sturdy Ordering Information
extruded aluminum, are stand-alone DIN-rail mounted protocol To order this product, please use the following:
gateways, providing communication between many of the most 5105-DFCM-PDPS DF1 Master/Slave to PROFIBUS DP Slave
widely used protocols in industrial automation today. Gateway
To place an order, please contact your local ProSoft Technology
Hardware Specifications distributor. For a list of ProSoft distributors near you, go to
Specification Description
http://www.prosoft-technology.com
Power Supply 24 VDC nominal
18 to 36 VDC allowed Distributors:
Positive, Negative, GND Terminals Place your order by email or fax to:
2.5 mm screwdriver blade North American / Latin American / Asia Pacific
Current Load 500 mA max@ 24 VDC [email protected],
Operating Temperature –20 to 50°C (–4 to 122°F) fax to +1 661.716.5101
Storage Temperature –40 to 85°C (–40 to 185°F) Europe
Relative Humidity 5 to 95% (non-condensing) [email protected],
fax to +33 (0) 5.61.78.40.52
Copyright © ProSoft Technology, Inc. 2000 - 2007. All Rights Reserved.
May 03, 2007