Configuration

The device is running!
<Huawei>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<Huawei>
<Huawei>
<Huawei>
<Huawei>
<Huawei>
<Huawei>
<Huawei>
<Huawei>dis
<Huawei>display ?
Cellular Cellular interface
aaa AAA
access-user User access
accounting-scheme Accounting scheme
acl <Group> acl command group
actual Current actual
adp-ipv4 Ipv4 information
adp-mpls Adp-mpls module
alarm Alarm
antenna Current antenna that outputting radio
anti-attack Specify anti-attack configurations
ap <Group> ap command group
ap-auth-mode Display AP authentication mode
ap-elabel Electronic label
ap-license AP license config
ap-performance-statistic Display AP performance statistic information
ap-profile Display AP profile information
ap-region Display AP region information
ap-run-info Display AP run information
ap-type Display AP type information
ap-update AP update
ap-whitelist AP white list
apv2r3 PAF(Product Adaptive File)
arp <Group> arp command group
arp-limit Display the number of limitation
atm ATM status and configuration information
authentication-scheme Authentication scheme
authorization-scheme Display AAA authorization scheme
auto-defend Auto defend
autoconfig Auto-config
autoconfig-status The status of auto-config
autosave Set the switch of saving configuration data
automatically by absolute time
bfd Specify BFD(Bidirectional Forwarding Detection)
configuration information
bgp BGP information
binding Display binding relation of profile
bridge <Group> bridge command group
bridge-link Bridge link
bridge-profile Display Bridge profile
bridge-whitelist Bridge Whitelist
bssid-decode Display bssid detail information
calibrate Global calibrate
capwap CAPWAP
channel Informational channel status and configuration
information
clock Clock status and configuration information
config System config
controller Specify controller
cpos CPOS controller
cpu-defend Configure CPU defend policy
cpu-usage Cpu usage information
current-configuration Current configuration
cwmp CPE WAN Management Protocol
ddns DDNS
debugging <Group> debugging command group
default-parameter <Group> default-parameter command group
device Device info
dhcp <Group> dhcp command group
dhcpv6 <Group> dhcpv6 command group
diagnostic-information System Information for Diagnosis
dialer DCC status and configuration information
dlsw DLSW status and configuration information
dns <Group> dns command group
domain Domain
dot1q IEEE 802.1Q encapsulation
dot1x <Group> dot1x command group
drop-profile Drop profile
dsl Display dsl information
efm EFM module
elabel Display manufacture information
epon-info Display information of EPON uplink port
error-down The interface was shut down because of an error
event
esn The machine ESN
eth-trunk Display information of eth-trunk
event Event
explicit-path Display IP explicit paths
factory-configuration Display factory configuration
fan Fan
fe1 E1-F
fib Forwarding information base
firewall <Group> firewall command group
firewall-nat Firewall & NAT infomation
flow-suppression Flow suppression config
forward Forward
fr <Group> fr command group
ft1 T1-F
ftp-client Show ftp client configuration
ftp-server Status and configuration of the FTP server
ftp-users Status and configuration of the FTP users
garp Generic Attribute Registration Protocol
gpon-info Display information of GPON uplink port
gvrp Generic VLAN Registration Protocol
hdlc Information of HDLC
health System health information
history-command Configuration information about history commands
hotkey Hotkey status and configuration information
http HTTP
hwtacacs-server HWTACACS server information
icmp ICMP status and configuration information
icmpv6 ICMPv6 status and configuration information
igmp <Group> igmp command group
igmp-snooping <Group> igmp-snooping command group
ike Specify IKE(Internet Key Exchange) configuration
information
info-center <Group> info-center command group
interface <Group> interface command group
ip <Group> ip command group
ipsec Specify IPSec(IP Security) configuration information
ipv6 <Group> ipv6 command group
isdn ISDN status and configuration information
isis ISIS status and configuration information
keychain Keychain Configuration
l2-multicast Specify parameters for Layer 2 multicast
l2tp L2TP status and configuration information
l2tp-group PPP packet debugging functions
l2vpn Operate on MPLS L2VPN
l3vpn L3vpn module
lacp Link aggregation control protocol
language Display language version information
license License file
llc2 LLC2 status and configuration information
lldp <Group> lldp command group
load-balance-group Load balance group
local-user Display user(s)
log Display operation log
logbuffer Logbuffer status and configuration information
logfile Display logfile information
loop-detect Loop detect
lspv Lsp verification
mac-address MAC address
mac-authen MAC authenticate configure information
mac-limit MAC limit
mbgp Multicast-bgp routing table
memory-usage <Group> memory-usage command group
mfr Multilink FR configuration information
mib-index Display mib-index
migp Multicast-igp routing table
mirror-port Display Mirror feature
mld-snooping <Group> mld-snooping command group
mpls <Group> mpls command group
mrt Multicast-static routing table
msdp MSDP status and configuration information
<Huawei>
<Huawei>
<Huawei>di
<Huawei>dis
<Huawei>display
^
Error:Incomplete command found at '^' position.
<Huawei>
<Huawei>
<Huawei>display ?
aaa AAA
access-user User access
accounting-scheme Accounting scheme
acl <Group> acl command group
actual Current actual
adp-ipv4 Ipv4 information
adp-mpls Adp-mpls module
alarm Alarm
antenna Current antenna that outputting radio
anti-attack Specify anti-attack configurations
ap <Group> ap command group
ap-auth-mode Display AP authentication mode
ap-elabel Electronic label
ap-license AP license config
ap-performance-statistic Display AP performance statistic information
ap-profile Display AP profile information
ap-region Display AP region information
ap-run-info Display AP run information
ap-type Display AP type information
ap-update AP update
ap-whitelist AP white list
apv2r3 PAF(Product Adaptive File)
<Huawei>display?
display Display information
<Huawei>
<Huawei>
<Huawei>
<Huawei>
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]
[Huawei]sys
[Huawei]sysname R1
[R1]
[R1]
[R1]
[R1]dis
[R1]display int
[R1]display interface ?
Ethernet Ethernet interface
GigabitEthernet GigabitEthernet interface
NULL NULL interface
brief Summary information about the interface status and
configuration
counters Counters
description Interface description
main Main interface
slot Slot number
| Matching output
<cr> Please press ENTER to execute command
[R1]display interface br
[R1]display interface brief
PHY: Physical
*down: administratively down
(l): loopback
(s): spoofing
(b): BFD down
^down: standby
(e): ETHOAM down
(d): Dampening Suppressed
InUti/OutUti: input utility/output utility
Interface PHY Protocol InUti OutUti inErrors outErrors
GigabitEthernet0/0/0 down down 0% 0% 0 0
GigabitEthernet0/0/1 up down 0% 0% 0 0
GigabitEthernet0/0/2 down down 0% 0% 0 0
NULL0 up up(s) 0% 0% 0 0
[R1]
[R1]
[R1]display interface GigabitEthernet0/0/1
GigabitEthernet0/0/1 current state : UP
Line protocol current state : DOWN
Description:HUAWEI, AR Series, GigabitEthernet0/0/1 Interface
Route Port,The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc7d-43fa
Last physical up time : 2021-01-28 12:23:37 UTC-05:13
Last physical down time : 2021-01-28 12:23:31 UTC-05:13
Current system time: 2021-01-28 12:51:29-05:13
Port Mode: COMMON COPPER
Speed : 1000, Loopback: NONE
Duplex: FULL, Negotiation: ENABLE
Mdi : AUTO
Last 300 seconds input rate 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Input peak rate 0 bits/sec,Record time: -
Output peak rate 0 bits/sec,Record time: -
Input: 0 packets, 0 bytes

Unicast: 0, Multicast: 0
Broadcast: 0, Jumbo: 0
Discard: 0, Total Error: 0
CRC: 0, Giants: 0
Jabbers: 0, Throttles: 0
Runts: 0, Symbols: 0
Ignoreds: 0, Frames: 0
Output: 0 packets, 0 bytes

Unicast: 0, Multicast: 0
Broadcast: 0, Jumbo: 0
Discard: 0, Total Error: 0
Collisions: 0, ExcessiveCollisions: 0
Late Collisions: 0, Deferreds: 0
Input bandwidth utilization threshold : 100.00%

Output bandwidth utilization threshold: 100.00%
Input bandwidth utilization : 0%
Output bandwidth utilization : 0%
[R1]
[R1]
[R1]dis
[R1]display cu
[R1]display current-configuration conf
[R1]display current-configuration configuration int
[R1]display current-configuration int
[R1]display current-configuration interface GigabitEthernet0/0/1
[V200R003C00]
#
interface GigabitEthernet0/0/1
#
return
[R1]
[R1]
[R1]dis
[R1]display cu
[R1]display current-configuration con
[R1]display current-configuration configuration
[V200R003C00]
#
sysname R1
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone Indian Standard Time minus 05:13:20
clock daylight-saving-time Day Light Saving Time repeating 12:32 9-1 12:32 11-23
00:00 2005 2005
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
local-user admin service-type http
#
firewall zone Local
priority 15
#
#
#
#
interface NULL0
#
user-interface con 0
authentication-mode password
user-interface vty 0 4
#
wlan ac
#
return
[R1]
[R1]
[R1]
[R1]display current-configuration interface GigabitEthernet0/0/1
[V200R003C00]
#
#
return
[R1]
[R1]
[R1]int
[R1]interface gi
[R1]interface GigabitEthernet 0/0/1
[R1-GigabitEthernet0/0/1]
[R1-GigabitEthernet0/0/1]desc
[R1-GigabitEthernet0/0/1]description
[R1-GigabitEthernet0/0/1]description : TO-R2
[R1-GigabitEthernet0/0/1]ip add
[R1-GigabitEthernet0/0/1]ip address 10.0.12.1 ?
INTEGER<0-32> Length of IP address mask
IP_ADDR<X.X.X.X> IP address mask
[R1-GigabitEthernet0/0/1]ip address 10.0.12.1 255.255.255.0
Jan 28 2021 13:01:13-05:13 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP o
n the interface GigabitEthernet0/0/1 has entered the UP state.
[R1-GigabitEthernet0/0/1]dis
[R1-GigabitEthernet0/0/1]disp
[R1-GigabitEthernet0/0/1]display th
[R1-GigabitEthernet0/0/1]display this
[V200R003C00]
#
description : TO-R2
ip address 10.0.12.1 255.255.255.0
#
return
<R1>
<R1>dis
<R1>display cu
<R1>display current-configuration int
<R1>display current-configuration interface gi
<R1>display current-configuration interface gi
<R1>display current-configuration interface Gi
<R1>display current-configuration interface GigabitEthernet0/0/1
[V200R003C00]
#
description : TO-R2
ip address 10.0.12.1 255.255.255.0
#
return
<R1>
<R1>
<R1>sy
<R1>system-view
[R1]
[R1]
[R1]q
[R1]qu
[R1]interface GigabitEthernet0/0/1
[R1-GigabitEthernet0/0/1]display this
[V200R003C00]
#
description : TO-R2
ip address 10.0.12.1 255.255.255.0
#
return
[R1-GigabitEthernet0/0/1]qu
[R1-GigabitEthernet0/0/1]quit
[R1]
[R1]
[R1]qu
[R1]quit
<R1>
<R1>
<R1>
<R1>
<R1>
<R1>
<R1>
<R1>dis
<R1>display ip rout
<R1>display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 7 Routes : 7
Destination/Mask Proto Pre Cost Flags NextHop Interface
10.0.12.0/24 Direct 0 0 D 10.0.12.1 GigabitEthernet0

/0/1
/0/1
/0/1
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
<R1>
<R1>
<R1>
<R1>
<R1>
<R1>sy
[R1]
[R1]ip rout
[R1]ip route-s
[R1]ip route-static 10.0.23.0 24 10.0.12.2
[R1]
[R1]dis
[R1]display ip ru
[R1]display ip rou
[R1]display ip routing-table
------------------------------------------------------------------------------

/0/1
/0/1
/0/1
10.0.23.0/24 Static 60 0 RD 10.0.12.2 GigabitEthernet0
/0/1
[R1]
[R1]
<R1>sy
[R1]
[R1]int
[R1]interface loo
[R1]interface LoopBack 0
[R1-LoopBack0]
[R1-LoopBack0]ip add
[R1-LoopBack0]ip address 10.0.1.1 24
[R1-LoopBack0]
[R1-LoopBack0]dis th
[V200R003C00]
#
interface LoopBack0
ip address 10.0.1.1 255.255.255.0
#
return
[R1-LoopBack0]q
[R1]
[R1]
[R1]ip rou
[R1]ip route-s
[R1]undo ip route-static 10.0.23.0 24 10.0.12.2
[R1]
[R1]ip rou
[R1]ip route-s
[R1]ip route-static 0.0.0.0 0 gi
[R1]ip route-static 0.0.0.0 0 GigabitEthernet 0/0/1
[R1]
[R1]

<R1>
<R1>dis ip routi
<R1>dis ip routing-table
------------------------------------------------------------------------------
0.0.0.0/0 Static 60 0 D 10.0.12.1 GigabitEthernet0

/0/1
10.0.1.0/24 Direct 0 0 D 10.0.1.1 LoopBack0
/0/1
/0/1
/0/1
<R1>
<R1>
<R1>sy
[R1]
[R1]
[R1]int
[R1]interface gi
[R1-GigabitEthernet0/0/1]arp-pro
[R1-GigabitEthernet0/0/1]arp-proxy en
[R1-GigabitEthernet0/0/1]arp-proxy enable
///////////////////////////////////////////////////////////////////////////////////
/////////////////////////
<Huawei>
<Huawei>
<Huawei>
<Huawei>
<Huawei>
<Huawei>
<Huawei>sy
<Huawei>system-view
[Huawei]
[Huawei]
[Huawei]sy
[Huawei]sysname R2
[R2]
[R2]
[R2]int
[R2]interface gi
[R2-GigabitEthernet0/0/1]de
[R2-GigabitEthernet0/0/1]description TO-R1
[R2-GigabitEthernet0/0/1]ip address 10.0.12.2 24
[R2-GigabitEthernet0/0/1]dis th
[V200R003C00]
#
description TO-R1
ip address 10.0.12.2 255.255.255.0
#
return
[R2-GigabitEthernet0/0/1]ping 10.0.12.1
PING 10.0.12.1: 56 data bytes, press CTRL_C to break
Reply from 10.0.12.1: bytes=56 Sequence=1 ttl=255 time=710 ms
--- 10.0.12.1 ping statistics ---

5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 10/150/710 ms
[R2-GigabitEthernet0/0/1]interface GigabitEthernet 0/0/2
[R2-GigabitEthernet0/0/2]description :
[R2-GigabitEthernet0/0/2]description :TO-R3
[V200R003C00]
#
description :TO-R3
ip address 10.0.23.2 255.255.255.0
#
return
[R2]
[R2]
<R2>
<R2>dis
<R2>display ip rou
<R2>display ip routing-table
------------------------------------------------------------------------------

/0/1
/0/1
/0/1
/0/2
/0/2
/0/2
<R2>
<R2>
<R2>sy
[R2]
[R2]ip rou
[R2]ip route-s
[R2]
[R2]ip rout
[R2]ip route-s
[R2]
[R2]
[R2]undo ip route-static 10.0.23.0 24 GigabitEthernet 0/0/2
[R2]
[R2]
[R2]int
[R2]interface loo
[R2-LoopBack0]
[R2-LoopBack0]
[V200R003C00]
#
interface LoopBack0
ip address 10.0.2.2 255.255.255.0
#
return
[R2-LoopBack0]q
[R2]
[R2]
<R2>
<R2>
<R2>dis
<R2>display cu
<R2>display current-configuration con
<R2>display current-configuration configuration
[V200R003C00]
#
sysname R2
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone Indian Standard Time minus 05:13:20
clock daylight-saving-time Day Light Saving Time repeating 12:32 9-1 12:32 11-23
00:00 2005 2005
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
local-user admin service-type http
#
firewall zone Local
priority 15
#
#
description TO-R1
ip address 10.0.12.2 255.255.255.0
#
description :TO-R3
ip address 10.0.23.2 255.255.255.0
#
interface NULL0
#
interface LoopBack0
ip address 10.0.2.2 255.255.255.0
#
user-interface con 0
authentication-mode password
#
wlan ac
#
return
<R2>
<R2>
<R2>
<R2>
<R2>sy
[R2]
[R2]
[R2]ip rou
Info: The destination address and mask of the configured static route mismatched,
and the static route 10.0.1.0/24 was generated.
[R2]
[R2]ip rou
[R2]ip route-s
Info: The destination address and mask of the configured static route mismatched,
and the static route 10.0.3.0/24 was generated.
[R2]
[R2]
[R2]disp
[R2]display ip rout
------------------------------------------------------------------------------

/0/1
/0/2
/0/1
/0/1
/0/1
/0/2
/0/2
/0/2
[R2]
[R2]
[R2]ping 10.0.1.1
Request time out
Request time out
Request time out
Request time out
Request time out

100.00% packet loss
[R2]
[R2]sa
[R2]sav
[R2]q
<R2>
<R2>sa
<R2>save
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait.......
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
<R2>
<R2>
<R2>ping 10.0.1.1
Request time out
Request time out
Request time out

100.00% packet loss
<R2>
<R2>ping 10.0.3.3
Request time out
Request time out
Request time out

100.00% packet loss
<R2>##
<R2>
<R2>
<R2>sy
[R2]
[R2]int
[R2]interface gi
[R2-GigabitEthernet0/0/2]arp prox
[R2-GigabitEthernet0/0/2]arp-pr
[R2-GigabitEthernet0/0/2]arp-proxy en
[R2-GigabitEthernet0/0/2]interface GigabitEthernet 0/0/1
[V200R003C00]
#
description TO-R1
ip address 10.0.12.2 255.255.255.0
arp-proxy enable
#
return
<R2>
<R2>
<R2>ping 10.0.1.1

0.00% packet loss
<R2>
<R2>
///////////////////////////////////////////////////////////////////////////////////
//////////////////////
<Huawei>
<Huawei>
<Huawei>sy
<Huawei>system-view
[Huawei]
[Huawei]
[Huawei]sy
[Huawei]sysname
^
Error:Incomplete command found at '^' position.
[Huawei]
[Huawei]sysname R3
[R3]
[R3]
[R3]int
[R3]interface gi
[R3-GigabitEthernet0/0/2]description : TO-R2
[R3-GigabitEthernet0/0/2]ipm add
[V200R003C00]
#
description : TO-R2
ip address 10.0.23.3 255.255.255.0
#
return
[R3]
[R3]
[R3]ping 10.0.23.2

0.00% packet loss
[R3]
[R3]ping 10.0.12.1
Request time out
Request time out
Request time out
Request time out
Request time out

100.00% packet loss
[R3]
[R3]
[R3]disp
[R3]display ip rout
------------------------------------------------------------------------------

/0/2
/0/2
/0/2
[R3]
[R3]
[R3]
[R3]ip rout
[R3]ip route-s
[R3]
[R3]ping 10.0.12.1
Request time out
Request time out
Request time out
Request time out
Request time out

100.00% packet loss
[R3]
------------------------------------------------------------------------------

/0/2
/0/2
/0/2
/0/2
[R3]
[R3]
[R3]
<R3>
<R3>
<R3>pin
<R3>ping 10.0.12.1
Request time out
Request time out
Request time out
Request time out
Request time out

100.00% packet loss
<R3>
<R3>ping 10.0.12.1
Request time out
Request time out
Request time out
Request time out
Request time out

100.00% packet loss
<R3>
<R3>ping -a 10.0.23.3 10.0.12.1
Request time out
Request time out
Request time out
Request time out
Request time out

100.00% packet loss
<R3>
<R3>
<R3>
<R3>sy
[R3]
[R3]
[R3]int
[R3]interface loop
[R3-LoopBack0]
[R3-LoopBack0]
[V200R003C00]
#
interface LoopBack0
ip address 10.0.3.3 255.255.255.0
#
return
[R3-LoopBack0]q
[R3]
[R3]
<R3>
<R3>
<R3>sy
[R3]
[R3]
[R3]
[R3]ip rou
[R3]ip route-s
[R3]
[R3]

<R3>
<R3>dis ip routi
------------------------------------------------------------------------------

/0/2
/0/2
/0/2
/0/2
<R3>
<R3>
<R3>sy
[R3]
[R3]int
[R3]interface gi
[R3-GigabitEthernet0/0/2] ?
GigabitEthernet0/0/2 interface view commands:
arp-fake ARP fake entry
arp-limit Limit the number of learnt ARP
arp-ping ARP-ping
arp-proxy ARP(Address Resolve Protocol) proxy configuration
command
auto Auto negotiates port mode
backup Backup information
bandwidth Specify mib-referenced bandwidth of the interface
bridge Bridge
clear <Group> clear command group
combo-port Set combo type
ddns DDNS
description Specify interface description
dhcp <Group> dhcp command group
dialer Dialer
direct-route Direct route
discard Discard packets
display Display information
dlsw Specify DLSW(Data Link Switching) configure
information
duplex Configure duplex operation mode
efm <Group> efm command group
enable Enable function
energy-efficient-ethernet Energy-efficient-ethernet
eth-trunk Add the interface into eth-trunk
flow-control Configure flow-control operation mode
icmp <Group> icmp command group
igmp Specify parameters for IGMP
ip <Group> ip command group
ipsec Specify IPSec(IP Security) configuration
information
ipv6 <Group> ipv6 command group
isis Configure interface parameters for ISIS
llc2 Specify LLC2(Logical Link Control Class 2)
configure information
lldp <Group> lldp command group
load-balance <Group> load-balance command group
log-threshold Set log threshold
loopback Configure port loopback
mdi Set mdi
mirror Specify Mirror feature
mpls <Group> mpls command group
mtrace Trace route to multicast source
mtu Specify Maximum Transmission Unit(MTU) of the
interface
multicast Multicast information
nat Specify NAT(Network Address Translation)
negotiation Set negotiation mode
ntp-service Specify NTP(Network Time Protocol) configuration
information
ospf <Group> ospf command group
ospfv3 <Group> ospfv3 command group
pim Specify interface parameters for PIM
ping <Group> ping command group
port <Group> port command group
port-down Port down
portal Portal authentication
pppoe-client PPPoE Client Settings
pppoe-server Specify PPPoE(PPP over Ethernet) server
qinq 802.1Q in 802.1Q
qos <Group> qos command group
quit Exit from current mode and enter prior mode
reset <Group> reset command group
restart Restart the specified interface
return Enter the privileged mode
rip <Group> rip command group
ripng RIPng (Routing Information Protocol next
generation)
rmon Specify RMON configuration
rmon-statistics Specify RMON statistics
set <Group> set command group
shutdown Shutdown the specified interface
single-fiber Configure port single fiber communication
speed Configure port speed mode
standby Specify interface standby configuration information
static-route IPv4 static routes

tcp Transmission Control Protocol
test-aaa Accounts test
tracert <Group> tracert command group
traffic-filter Filter packets based on acl
traffic-policy Apply specific traffic policy
trap-threshold <Group> trap-threshold command group
trust Specify trust parameters
udp-helper UDP Helper
undo Negate a command or set its defaults
urpf Unicast reverse path forward function
virtual-cable-test Virtual Cable Test
vrrp Specify configuration information about VRRP
vrrp6 Specify configuration information about VRRP6
web-auth-server Bind portal server name
zone Specify a security zone name
[R3-GigabitEthernet0/0/2]neg
[R3-GigabitEthernet0/0/2]negotiation au
[R3-GigabitEthernet0/0/2]negotiation auto
Warning: Configuration is repeated.
[R3-GigabitEthernet0/0/2]ar
[R3-GigabitEthernet0/0/2]arp ?
anti-attack Anti attack
detect-mode ARP detection mode
detect-times Set arp item timeout detect times
expire-time Set arp expire time
learning ARP learning
validate Validate ARP packet
[R3-GigabitEthernet0/0/2]di th
[V200R003C00]
#
description : TO-R2
ip address 10.0.23.3 255.255.255.0
#
return
[R3-GigabitEthernet0/0/2]multi
[R3-GigabitEthernet0/0/2]multicast ?
boundary Multicast boundary information
load-splitting Load-splitting
[R3-GigabitEthernet0/0/2]arp
[R3-GigabitEthernet0/0/2]arp broa
[R3-GigabitEthernet0/0/2]arp broad
[R3-GigabitEthernet0/0/2]arp ?
anti-attack Anti attack
detect-mode ARP detection mode
detect-times Set arp item timeout detect times
expire-time Set arp expire time
learning ARP learning
validate Validate ARP packet
[R3-GigabitEthernet0/0/2]arp le
[R3-GigabitEthernet0/0/2]arp learning ?
strict ARP learning strict
[R3-GigabitEthernet0/0/2]q
[R3]
[R3]
[R3]ping 10.0.12.1
Request time out
Request time out
Request time out
Request time out
Request time out

100.00% packet loss

[R3-GigabitEthernet0/0/2]prox
[R3-GigabitEthernet0/0/2]arp
[R3-GigabitEthernet0/0/2]arp-pr
[R3-GigabitEthernet0/0/2]arp-proxy ?
enable Enable proxy ARP(Address Resolve Protocol)
[R3-GigabitEthernet0/0/2]arp-proxy ena
Request time out
Request time out
Request time out
Request time out
Request time out

100.00% packet loss

0.00% packet loss
<R3>
<R3>ping 10.0.2.2

0.00% packet loss
<R3>ping 10.0.1.1
Request time out
Request time out
Request time out
Request time out
Request time out

100.00% packet loss
<R3>
<R3>dis ip routi
------------------------------------------------------------------------------

/0/2
/0/2
/0/2
/0/2
<R3>
<R3>
<R3>

Configuration

Uploaded by

Copyright:

Available Formats

Configuration

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Configuration

Uploaded by

Copyright:

Available Formats

The device is running!

Configuration console time out, please press any key to log on

Configuration console time out, please press any key to log on

Input: 0 packets, 0 bytes

Output: 0 packets, 0 bytes

Input bandwidth utilization threshold : 100.00%

Configuration console time out, please press any key to log on

Configuration console time out, please press any key to log on

Configuration console time out, please press any key to log on

Destination/Mask Proto Pre Cost Flags NextHop Interface

10.0.12.0/24 Direct 0 0 D 10.0.12.1 GigabitEthernet0

Configuration console time out, please press any key to log on

Destination/Mask Proto Pre Cost Flags NextHop Interface

10.0.12.0/24 Direct 0 0 D 10.0.12.1 GigabitEthernet0

Configuration console time out, please press any key to log on

Configuration console time out, please press any key to log on

Destination/Mask Proto Pre Cost Flags NextHop Interface

0.0.0.0/0 Static 60 0 D 10.0.12.1 GigabitEthernet0

Configuration console time out, please press any key to log on

Configuration console time out, please press any key to log on

The device is running!

Configuration console time out, please press any key to log on

Configuration console time out, please press any key to log on

--- 10.0.12.1 ping statistics ---

Configuration console time out, please press any key to log on

Destination/Mask Proto Pre Cost Flags NextHop Interface

10.0.12.0/24 Direct 0 0 D 10.0.12.2 GigabitEthernet0

Configuration console time out, please press any key to log on

Destination/Mask Proto Pre Cost Flags NextHop Interface

10.0.1.0/24 Static 60 0 D 10.0.12.2 GigabitEthernet0

--- 10.0.1.1 ping statistics ---

--- 10.0.1.1 ping statistics ---

--- 10.0.3.3 ping statistics ---

Configuration console time out, please press any key to log on

Configuration console time out, please press any key to log on

--- 10.0.1.1 ping statistics ---

The device is running!

Configuration console time out, please press any key to log on

Configuration console time out, please press any key to log on

--- 10.0.23.2 ping statistics ---

--- 10.0.12.1 ping statistics ---

Destination/Mask Proto Pre Cost Flags NextHop Interface

10.0.23.0/24 Direct 0 0 D 10.0.23.3 GigabitEthernet0

--- 10.0.12.1 ping statistics ---

Destination/Mask Proto Pre Cost Flags NextHop Interface

10.0.12.0/24 Static 60 0 D 10.0.23.3 GigabitEthernet0

Configuration console time out, please press any key to log on

--- 10.0.12.1 ping statistics ---

--- 10.0.12.1 ping statistics ---

--- 10.0.12.1 ping statistics ---

Configuration console time out, please press any key to log on

Configuration console time out, please press any key to log on

Destination/Mask Proto Pre Cost Flags NextHop Interface

0.0.0.0/0 Static 60 0 D 10.0.23.3 GigabitEthernet0

static-route IPv4 static routes

--- 10.0.12.1 ping statistics ---

[R3]interface GigabitEthernet 0/0/2

--- 10.0.12.1 ping statistics ---

--- 10.0.12.1 ping statistics ---