This product data sheet provides specifications for a 4606 Z fan, including:
1. Mechanics details such as dimensions, materials, torque limits and screw size.
2. Electrical operating data like voltage, power consumption, speed and tolerance levels under different pressure conditions.
3. Performance details including aerodynamic curves showing maximum free air flow and pressure, and sound data measured under specific conditions.
4. Environmental requirements and safety information.
This product data sheet provides specifications for a 4606 Z fan, including:
1. Mechanics details such as dimensions, materials, torque limits and screw size.
2. Electrical operating data like voltage, power consumption, speed and tolerance levels under different pressure conditions.
3. Performance details including aerodynamic curves showing maximum free air flow and pressure, and sound data measured under specific conditions.
4. Environmental requirements and safety information.
This product data sheet provides specifications for a 4606 Z fan, including:
1. Mechanics details such as dimensions, materials, torque limits and screw size.
2. Electrical operating data like voltage, power consumption, speed and tolerance levels under different pressure conditions.
3. Performance details including aerodynamic curves showing maximum free air flow and pressure, and sound data measured under specific conditions.
4. Environmental requirements and safety information.
This product data sheet provides specifications for a 4606 Z fan, including:
1. Mechanics details such as dimensions, materials, torque limits and screw size.
2. Electrical operating data like voltage, power consumption, speed and tolerance levels under different pressure conditions.
3. Performance details including aerodynamic curves showing maximum free air flow and pressure, and sound data measured under specific conditions.
4. Environmental requirements and safety information.
04/04/2019 page 2 of 10 Product Data Sheet 9274014802 VWC0119AQHCS 4606 Z
1 General
Fan type Fan
Rotating direction looking at rotor Clockwise Airflow direction Air outlet over struts Bearing system Ball bearing Mounting position - shaft Any Balancing grade 2,5
2 Mechanics
2.1 General
Width 119,0 mm Height 119,0 mm Depth 38,0 mm Diameter 0,0 mm Mass 0,540 kg Housing material Metal Impeller material Metal Max. torque when mounted across both mounting Wire outlet corner: 120 Ncm flanges Remaining corners: 350 Ncm Screw size ISO 4762 - M4 degreased, without an additional brace and without washer
04/04/2019 page 3 of 10 Product Data Sheet 9274014802 VWC0119AQHCS 4606 Z
2.2 Connections
Electrical connection Plug
See drawing Lead wire length
Tolerance See drawing Tube length
Tolerance Wire size (AWG) Insulation diameter Plug See drawing Contact See drawing
04/04/2019 page 4 of 10 Product Data Sheet 9274014802 VWC0119AQHCS 4606 Z
3 Operating Data
3.1 Electrical Operating Data
Measurement Normal air density = 1,2 kg/m3; Temperature 23°C +/- 3°C; Motor axis horizontal;warm-up conditions: time before measuring 5 minutes (unless otherwise specified). In the intake and outlet area should not be any solid obstruction within 0,5 m.
∆p = 0: corresp. to free air flow (see chapter aerodynamics)
I: corresp. to RMS line current
Features Condition Symbol Values
Frequency ∆p = 0 f 50 Hz 60 Hz 115 V 115 V Nominal voltage ∆p = 0 UN +- 10 % +- 10 % Tolerance Power consumption 19 W 18 W ∆p = 0 P +- 10 % +- 10 % Tolerance Speed 2.650 1/min 3.100 1/min ∆p = 0 n +- 3 % +- 3 % Tolerance
04/04/2019 page 5 of 10 Product Data Sheet 9274014802 VWC0119AQHCS 4606 Z
3.2 Electrical Features
Locked rotor protection Impedance
Locked rotor current at
3.3 Aerodynamics
Measurement Measured with a double chamber intake rig acc. to DIN EN ISO 5801. conditions: Normal air density = 1,2 kg/m3; Temperature 23°C +/ - 3°C; In the intake and outlet area should not be any solid obstruction within 0,5 m. Motor shaft horizontal. The information is only valid under the specified test conditions and may be changed by the installation conditions. If there are deviations from the standard test conditions, the characteristic values must be checked under the installed conditions.
a.) Operation condition:
2.650 1/min at free air flow Frequency: 50 Hz
Max. free-air flow (∆p = 0 / = max.) 152,0 m3/h
Max. static pressure (∆p = max. / =0) 70 Pa
b.) Operation condition:
3.100 1/min at free air flow Frequency: 60 Hz
Max. free-air flow (∆p = 0 / = max.) 180,0 m3/h
Max. static pressure (∆p = max. / =0) 80 Pa
04/04/2019 page 6 of 10 Product Data Sheet 9274014802 VWC0119AQHCS 4606 Z
3.4 Sound Data
Measurement Sound pressure level: 1 meter distance between microphone and the air intake. conditions: Sound power level: Acc. to DIN 45635 part 38 (ISO 10302)Sound power level: Acc. to DIN 45635 part 38 (ISO 10302) Measured in a semianchoic chamber with a background noise level of Lp(A) < 5 dB(A) For further measurement conditions see chapter aerodynamics.
a.) Operation condition:
2.650 1/min at free air flow Frequency: 50 Hz
Optimal operating point 130,0 m3/h @ 15 Pa
Sound power level at the optimal operating 5,1 bel(A)
point Sound pressure level at free air flow, 37,0 dB(A) measured in rubber bands
b.) Operation condition:
3.100 1/min at free air flow Frequency: 60 Hz
Optimal operating point 148,0 m3/h @ 20 Pa
Sound power level at the optimal operating 5,5 bel(A)
point Sound pressure level at free air flow, 42,0 dB(A) measured in rubber bands
4 Environment
4.1 General
-40 °C / 50 Hz Min. permitted ambient temperature TU min. -40 °C / 60 Hz 75 °C / 50 Hz Max. permitted ambient temperature TU max. 85 °C / 60 Hz Min. permitted storage temperature TL min. -40 °C Max. permitted storage temperature TL max. 100 °C
04/04/2019 page 7 of 10 Product Data Sheet 9274014802 VWC0119AQHCS 4606 Z
4.2 Climatic Requirements
Humidity requirements humid heat, constant; according to DIN EN 60068-2-
78, 14 days Water exposure None Dust requirements None Salt fog requirements None
Permitted application area:
The product is intended for use in sheltered rooms with controlled temperature and controlled humidity. Directly exposure to water must be avoided.
Pollution degree 1 (according DIN EN 60664-1)
There is either no pollution or it occurs only dry, non-conductive pollution. The pollution has no negative impact.
5 Safety
5.1 Electrical Safety
Dielectric strength DIN EN 60950 (VDE 0805) and DIN EN 60335 (VDE 0700) A.) Type test 1000 VAC / 1 Min. Measuring conditions: After 48h of storage at 95% R.H. and 25°C. No arcing or breakdown is allowed! All connections together to ground. B.) Routine test 1500 VAC / 1 Sec. Measuring conditions: At indoor climate. No arcing or breakdown is allowed! All connections together to ground. Isolation resistance RI > 50 MOhm Measuring conditions: After 48h of storage at 95% R.H. and 25°C measured with U=500 VDC for 1 min. Clearance / creepage distance 2,0 mm / 1,1 mm Protection class I
5.2 Approval Tests
CE EC Declaration of Conformity Yes
EAC Eurasian Conformity Yes UL Underwriters Laboratories Yes / UL507, Electric Fans E38324 Association for Electrical, Electronic and Yes / Approval acc. to EN 60950 (VDE 0805) - Information VDE Information Technologies technology equipment CSA Canadian Standards Association Yes / C22.2 No. 113 Fans and Ventilators CCC China Compulsory Certification Yes / GB 12350 Safety Requirements for small Power Motors
The approval tests are observed to:
U approval max.: 115 V / f: 60 Hz @ TU approval max.: 85 °C
6 Reliability
04/04/2019 page 8 of 10 Product Data Sheet 9274014802 VWC0119AQHCS 4606 Z
6.1 General
37.500 h / 50 Hz Life expectancy L10 at TU = 40 °C 40.000 h / 60 Hz 17.500 h / 50 Hz Life expectancy L10 at TU max. 15.000 h / 60 Hz
