Scribd
Upload
158 views2 pages

BUS M30M1-PPX-20/130-S92K BUS0039: Display/Operation Environmental Conditions

This document provides specifications for an ultrasonic transducer sensor. The sensor measures distance using ultrasonic waves, has an IP67 rating, operates from -25 to 70 degrees Celsius, and connects via an M12 connector. It has a measuring range of 200 to 2000 mm and is designed for object detection applications.

Uploaded by

ajamyuya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
158 views2 pages

BUS M30M1-PPX-20/130-S92K BUS0039: Display/Operation Environmental Conditions

This document provides specifications for an ultrasonic transducer sensor. The sensor measures distance using ultrasonic waves, has an IP67 rating, operates from -25 to 70 degrees Celsius, and connects via an M12 connector. It has a measuring range of 200 to 2000 mm and is designed for object detection applications.

Uploaded by

ajamyuya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

BUS M30M1-PPX-20/130-S92K

BUS0039

1) Ultrasonic transducer axis  2) Exit direction 90° connector  3) Display and control panel

Display/Operation Environmental conditions


Adjuster Key (2x) Ambient temperature -25…70 °C
Setting Multiplex speed Protection type IEC 60529 IP67
Synchronization on/off Storage temperature -40…85 °C
Synchronous/Multiplex mode
Segment displ. bright/dark/off
Filter strength (10 levels)
Response delay 0 to 20 s
Foreground suppression range Functional safety
Multiplex sensor address
Sensor calibration Diagnostic coverage 0%
Temperature comp. on/off Functional safety no
Measured value filter
Hysteresis Mission Time 10 a
Detection range (3 levels)
Teach-in mode display/button
Factory setting (Reset)
Key disable on/off General data
Operating mode
Switching distance, 2 values Application Object detection
Normally open/Normally closed Approval/Conformity CE
Operating mode Retro-reflector
Refl.light scanner (switch.pnt.)
Electrical connection Refl.light scanner (window)
Series M30M1
Connection M12x1-Connector
Polarity reversal protected yes
Short-circuit protection yes Material
Housing material Brass
PBTTPU
Electrical data Material sensing surface PU foamEpoxy resinGlass
Current draw max. 80 mA Surface protection nickel plates
Hysteresis H max. 20 mm
MTTF (40 °C) 178 a
Operating voltage Ub 9…30 VDC Mechanical data
Output current max. 200 mA Fastening detail Nut M30x1.5
Rated operating voltage Ue DC 24 V
Switching frequency 8 Hz
Synchronization internal, max. 10 sensors
Ultrasonic frequency 200 kHz

Internet www.balluff.com For definitions of terms, see main catalog eCl@ss 9.1: 27-27-08-04 1(2)
Balluff Germany +49 (0) 7158 173-0, 173-370 Subject to change without notice ETIM 6.0: EC001846
Balluff USA 1-800-543-8390 BUS0039_09-03-17_19:18
Balluff China +86 (0) 21-50 644131
BUS M30M1-PPX-20/130-S92K
BUS0039

Resolution ≤ 0.180 mm

Output/Interface
Input function Synchronization signal Remarks
Switching output PNP Normally open/Normally
closed (NO/NC) The sensor is functional again after the overload has been eliminated.
Reference object for Sn: Tube ø27mm. Max. range applies to aligned plate.
Do not press key using a pointed tool.
Order accessories separately.
Range/Distance For additional information, refer to user's guide.

Measuring range 200…2000 mm For further information on MTTF/B10d, please refer to the MTTF / B10d Certifi­
cate.
Range 200…2000 mm
Rated operating distance Sn 1300 mm Specification of the MTTF value and the B10d value do not represent any bin­
Repeat accuracy ±0.15 % FS ding quality and/or life expectancy guarantees.

Connector view

 
Wiring Diagram

 
Additional View

Internet www.balluff.com For definitions of terms, see main catalog eCl@ss 9.1: 27-27-08-04 2(2)
Balluff Germany +49 (0) 7158 173-0, 173-370 Subject to change without notice ETIM 6.0: EC001846
Balluff USA 1-800-543-8390 BUS0039_09-03-17_19:18
Balluff China +86 (0) 21-50 644131

You might also like