0% found this document useful (0 votes)
87 views7 pages

CybSDK Demos General Htcvive Manual

This document provides instructions for setting up a Cyberith Virtualizer with an HTC Vive for virtual reality use. It outlines the prerequisites of DirectX, SteamVR, an HTC Vive, and a Virtualizer. It describes calibrating the Virtualizer according to its instructions. It then provides steps to calibrate the Virtualizer with the HTC Vive by launching SteamVR room setup in standing only mode, centering the HTC Vive on the Virtualizer base plate, and following the SteamVR calibration steps.

Uploaded by

Jose Garcia T.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
87 views7 pages

CybSDK Demos General Htcvive Manual

This document provides instructions for setting up a Cyberith Virtualizer with an HTC Vive for virtual reality use. It outlines the prerequisites of DirectX, SteamVR, an HTC Vive, and a Virtualizer. It describes calibrating the Virtualizer according to its instructions. It then provides steps to calibrate the Virtualizer with the HTC Vive by launching SteamVR room setup in standing only mode, centering the HTC Vive on the Virtualizer base plate, and following the SteamVR calibration steps.

Uploaded by

Jose Garcia T.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Cyberith GmbH

Arbeitergasse 25
CYBERITH SDK + HTC Vive Setup
3130 Herzogenburg 1
Holger Hager
Austria
CEO
[email protected]
FN 410899p
Table of Contents
Prerequisites ........................................................................................................................................................... 3
Calibrating the Virtualizer ....................................................................................................................................... 4
Calibrate the Virtualizer with the HTC Vive ............................................................................................................. 4
Steps to follow very carefully .............................................................................................................................. 6

CYBERITH SDK + HTC Vive Setup 2


Prerequisites
• DirectX
https://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=35

• SteamVR
http://store.steampowered.com/

1. First, install Steam from this website, have a Steam account with an activated HTC Vive serial key.

2. Now, go to the Library, in the “Tools” subsection and install SteamVR from it.

3. Run it once installed, done.


4. In case you need the setup instructions:
https://support.steampowered.com/kb_article.php?s=bb45cc5a9b71f9eb8c9254c73caffddf&ref=2001-UXCM-4439

• An HTC Vive
• A Virtualizer

CYBERITH SDK + HTC Vive Setup 3


Calibrating the Virtualizer
Please calibrate the Virtualizer according to the document “Setup Instructions” provided with your
device or downloadable from our Developer Center.

CYBERITH SDK + HTC Vive Setup 4


Calibrate the Virtualizer with the HTC Vive
Before you plug in the Virtualizer, please turn the harness (search for the printed arrow on the ring)
to the reset position.

Figure 1 - Our Virtualizer in the office

Figure 2 - The Virtualizer surrounded by the two HTC Vive Base Stations

CYBERITH SDK + HTC Vive Setup 5


Steps to follow very carefully
First of all, launch the SteamVR’s “Room Setup” in Standing Only mode:

Then, you need to put the HTC Vive HMD at the center of the Virtualizer, directly on the base plate if
you can.
The Vive should be aimed towards the same pillar you calibrate the Virtualizer with (please check
the previous part of this document).

CYBERITH SDK + HTC Vive Setup 6


Finally, you can just follow the regular list of SteamVR calibration steps.

Congratulations!
You’re done with this setup, have fun!

CYBERITH SDK + HTC Vive Setup 7

You might also like