Generator SNF Submittal (Generator Cummins)

Project : ^ŬŝůůĞĚEƵƌƐĞƌǇ&ĂĐŝůŝƚǇ
Subject : Technical Submittal for Genset moĚĞůϭϲϳϱϱ

INDEX
ϭ͘ Company Profile
Ϯ͘ Project reference
ϯ͘ Certificates
ϰ͘ Technical offer
ϱ͘'ĞŶĞƌĂƚŽƌ^ŝǌĞĂůĐƵůĂƚŝŽŶ
ϲ͘ WƌŽũĞĐƚ^ƉĞĐŝĨŝĐĂƚŝŽŶΘCompliance statement
ϳ͘ Generator set data sheets
ϴ͘ Alternator set sheet
ϵ͘ Controller data sheet
ϭϬ͘ Battery & battery charger
ϭϭ͘ Drawings
ϭϮ͘ Warranty Statement
1. Company Profile
The Power of
Cummins
17/05/2018
Cummins Confidential
A history rooted in innovation
Founded in 1919
Cummins was founded by Clessie Cummins and
W.G. Irwin, who believed in the power of ideas and
had a shared vision of what ingenuity and hard
work could achieve.
The power of diesel

Cummins took the available technology and
transformed diesel into a reliable and everyday use
of transformation power source.
See a timeline of our history in the Sustainability Progress Report
2
J. Irwin Miller:
A visionary
Laid foundation for future global growth
Embraced the stakeholder model
Integrated values into the fabric of our

business
3
Powering a more prosperous world in 2017
190 58,600 1.3M+

Countries & territories Global employees Engines built in 2017
8,000 $734M 99
Wholly-owned &
Invested in research
independent Years of industry
& development in
distributor & dealer leadership
2017
locations
4
2017 financial performance
Revenue by operating segment Revenue by marketing territory
India, 4% Middle East &
Power Africa, 3%
Systems, 16% Latin America &
Mexico , 6%
Engine, 34%
Asia Pacific, 8%
Components,
23% US & Canada,
China , 10% 58%
Distribution, Europe/CIS, 11%

27%
2017 Sales: $20.4B 2017 EBIT1: $2.5B 2017 EBIT %: 12.2%
12017 EBIT excludes $39 million of tax charges related to the Tax Cuts and Jobs Act. 5
Our global manufacturing footprint
Engines Components
Locations in the U.S., Brazil, India and U.K. Locations in the U.S., Australia, Brazil, China, France, Germany,
India, Mexico, South Africa, South Korea and U.K.
Power Systems
Locations in the U.S., Brazil, China, India, Mexico, Romania, U.K. and Nigeria
*This list includes only the principal facilities. Engines and engine components are manufactured by joint ventures or independent
licensees at plants in the US, China, India, Russia, Japan, Sweden and Mexico. 6
Our growth strategy
CORE CAPABILITIES GROWTH PLATFORMS
Technology Leadership Leverage our

Build on our Global
Engine Power strength in
Systems Distribution
Scale Advantage Powertrain Channel
Distribution Network Increase

Data-Enabled
Components Distribution Participation
Services
in Attractive
Partnerships & Customers
Markets
NEW TECHNOLOGIES
7
Five operating segments
Cummins has a nearly 100-year-long track record of delivering leading power solutions. As we look
ahead, we know our industries and markets will continue to change, and we are committed to bringing our
customers the right technology at the right time.
Engine Power Components Distribution Electrified

Systems Power
8
Engine Segment
KEY CAPABILITIES
Technology leadership
Global dependability
Partnerships & customers
PRODUCT PORTFOLIO
2.8 to 15 L
48 to 715 HP
New parts and service
Remanufactured parts and engines
APPLICATIONS
Heavy-and medium-duty truck
Bus
Off-highway
Light-duty automotive
9
Power Systems Segment
KEY CAPABILITIES
Provides fully-integrated power generation
systems built for reliability in all
circumstances
Provides diesel and natural gas high-

horsepower engines for a wide variety of
equipment in the mining, rail, defense, oil
and gas, and commercial marine
applications
Develops A/C generator / alternator products

for internal consumption and for external
generator set assemblers
PRODUCT PORTFOLIO
Power ranges up to 5,500 HP
Engine displacement larger than 15L
SEGMENTS
Power generation
Industrial
Generator technologies 10
Components
Segment
KEY CAPABILITIES
Portfolio of technologies that provide value
across the powertrain
Provides an integrated system for

customers
PRODUCT PORTFOLIO
Aftertreatment systems, turbochargers,
filtration products, electronics, fuel systems
and automated transmissions
11
11
Distribution Segment
KEY CAPABILITIES
Sales – Offering a complete range of Cummins

Genuine Parts
Service – Full warranty repairs by highly qualified
factory trained technicians
Support – Parts availability, customer engineering
and expert support 24/7
PRODUCT PORTFOLIO
Parts
Engines
Power generation
Service
NETWORK
Consists of independent, partially-
owned and wholly-owned
distributors
12
Electrified Power Segment
INVESTMENT
Committed to investing $500M
over three years into electrification
innovation
ELECTRIC SYSTEMS
Currently in development are the
Cummins Electric Power Battery
(EPB) and the Cummins Hybrid
Plug-In (HPP) systems for urban
bus, which are expected to launch in
2019 and 2020 respectively
BATTERY SYSTEMS
Added battery pack design
capability with acquisitions of
Brammo & Johnson Matthey
Battery Systems
13
New technologies
Energy storage New prime mover
Distributed power Alternative fuels
Advanced manufacturing & materials Powertrain integration & electrification
Autonomous & advanced controls Connectivity, big data & artificial intelligence
14
Global partnerships
15
Public 16
2017 Corporate Responsibility
GLOBAL PARTICIPATION
365,006 Every Employee Every
Community (EEEC) hours
GLOBAL PRIORITY AREAS

Environment, education and
equality of opportunity
GLOBAL STRATEGIC INITIATIVES

• TEC: Technical Education for
Communities
• Cummins Powers Women

• News story
• Program video
17
Environmental sustainability targets
TO ACHIEVE BY
2020
3.5 million 32 percent 50 percent 95 percent 10 percent
Metric tons of Energy intensity Reduction in Company-wide Reduction in CO2
carbon dioxide reduction in direct water use facility recycling per KG of
(CO2) reduced facilities, adjusted intensity, adjusted rate with 30 sites company goods
annually through by hours worked. by hours worked, achieving Zero shipped annually
fuel efficiency gains with 15 sites Disposal status.
from products in achieving Water
use. Neutrality.
Read more about our sustainability efforts in the Sustainability Progress Report 18
“Cummins is at its best when the industry is
changing. We take advantage of opportunities
to innovate and differentiate ourselves against
the competition. We’ve done that for the last
100 years and will continue in the future.”
VICE PRESIDENT & CHIEF TECHNICAL OFFICER JENNIFER RUMSEY
19
Cummins Qatar
Distribution 2018
17/05/2018
Public
Distribution
55 Employees Organization Target

Gender Diversity 30% Female
CQ Distributor
Gender Diversity
Professional 32
Professional
Office 11
Mix Org. Goal
Shop 2 Customer is No. 1’
Technician 11
14% 86%
Cummins Confidential 21
Cummins Qatar LT
Emad Lotfy
General Manager
Elias Tabanji Nadia Fajr Mireille Geha Saleem K Kandiyil Subhankar Biswas
Aftermarket Manager HR Generalist Powergen Business Leader Supply Chain & Operations Mgr. Financial Controller
22
22
New Facility
CQ Distributor Starting Date

Plot : 4,558 sqm 1ST August, 2017
Building: 2,450sqm
Location Completion Date

E. Industrial Street 1ST August, 2019
Doha –Qatar
Time-Line
Period/Mont
Details h
Conceptual Design 1.0M
Obtaining DC1 1.5M
Obtaining DC2 3.0M
Tender Process 1.5M
Assign MEP 0.5M
Mobilization 1.0M
Execution 12M
Cummins
Qatar 24
Cummins
Qatar 25
Cummins History in the ME Region
First independent distributor 1956 (GCC – Saudi
Arabia)
• Covers - 111 Countries
- 1.8 billion people population
- 12 key languages
- 14 time zones
- 66 Distributors/ Dealers
- 35 unrepresented countries
Managed under Cummins Diesel International until

- 500+ Cummins outlets
- 260,000 engine population
• Has - 25 performance cells from 14
1987, followed by Central Area Org until 2000

separate businesses reporting
to various Business Units and
functional groups working with
distributors
Cummins in Middle East

Turkey
1 Dist Iran
3 Branches 1 Dealer
15 Dealers N/A engines
60163 engines
Grew to network of sixteen independent distributors

(53150 no access)
Afghanistan
Limited Trade
N/A engines
Cyprus
1 Dist 2 dealer
N/A engines
Pakistan
1 Dist 3 Dealers
4816 engines
Syria
1 Dist 1 dealer
N/A engines
and dealers
Iraq
Limited Trade
N/A engines
Lebanon
1 Distributor
921 engines UAE
1 Dist 1 Dealer
1877 engines
Egypt
1 Dist 2 dealers Bahrain
3000 engines 1 Distributor
220 engines
Sudan
1 Distributor Oman
Limited Trade 1 Distributor
Jordan Kuwait Saudi Arabia Yemen Qatar
N/A engines 1365 engines
1 Distributor 1 Distributor 1 Dis 9 Dealers 1 Distributor 1 Distributor
N/A engines N/A engines 5382 engines 421 engines 881 engines
46
D:\MGPRESENTATIONS\CA STRATEGY PRESENTATION
Cummins Middle East FZE est. 2000
Middle East Regional Distribution Organization (RDO)

est. 2006
Cummins Qatar JV Distribution est. 2012

Cummins Qatar History
1976 start as Cummins Dealer Engine
• Jaidah’s Heavy Equipment Division – a subsidiary of one of Qatar’s largest multi-
product importer and retailer - Jaidah Group – has been the Cummins official dealer in
Qatar for the past 37 years.
1992 Cummins Power Gen In dependent

Distributer
2000 Cummins Middle East Dealer Whole goods
2012 Cummins Qatar was established

• Due to the success of this dealership, and in view of the exceptional growth Qatar is
embarking upon, the two companies have come together in a Joint Venture to create
Cummins Qatar.
Projects in
Qatar
17/05/2018
Public
Qatar National Museum
Client: Qatar Museum Authority
Main Contractor: Hyundai
Sub-Contractor: BKG
Consultant: Hill International
Consultant Management: ASTAD
Cummins Scope of Work :
Rated Power : 8.8MW – 11MVA

• 4x C2750D5 Paralleling
• Medium Volt11KV
• DMC200 – Digital Master Control
• Spare parts
• FAT
• SAT
• Commissioning & Start up
• Warranty
• One Year Service Contract
• Delivered - 2014
Headquarters and Strategic Studies Centers
Client: Qatar Foundation

Main Contractor: Midmac
Sub-Contractor: Hitachi
Consultant: LP
Consultant Management : ASTAD
Cummins Scope of Work:
Rated Power : 4MW – 5MVA

• 2x C2250D5
• 1 xC1100D5
• Spare parts
• Complete installation work
• FAT
• SAT
• Warranty
• Installation Completion 2015
Hamad Medical Corp- CP300B
Client: HMC
Main Contractor: Hyundai E&C
Sub-Contractor: Shinbo Qatar WLL
Consultant: KEO
Cummins Scope of Work:
Rated Power : 10.8MW – 13.5MVA

• Installation
• Ni Cd battery
• Spare parts
• FAT
• SAT
• Warranty
• One Year Service Contract
• Delivery & Installation completion 2012 - 2015
Lekhwiya Sports Complex
Client: ISF
Main Contractor: QEMG -REDCO
Sub-Contractor: Voltas Qatar
Consultant: Hill International
Scope of Work:
Rated Power : 9.0MW – 11.250MVA

• 1xC2250 D5
• 1x C700D5
• Spare parts
• Ni Cd Batteries
• Daily Fuel Tank
• FAT
• SAT
• Warranty
• Delivery - 2014
Doha New Port (Package 1 – NPP26)
Client: Doha New Port

Main Contractor: CCC Contracting
Consultant: AECOM
Scope of Work:
Rated Power : 9 MW – 10 MVA

• 4x C2750 D5 Paralleling
• Spare parts
• Ni Cd Batteries
• Daily Fuel Tank
• FAT
• SAT
• Genset Installation
• Warranty
• Delivery - 2016
Doha New Port (Package 2 – NPP32)
Client Name: Doha New Port

Main Contractor: HBK Contracting
Sub-Contractor: Trans-gulf Elect-mechanical
Consultant: AECOM
Scope of Work:
Rated Power : 14 MW – 17.5 MVA

• 7 x C2750 D5 Paralleling
• Spare parts
• Ni Cd Batteries
• Daily Fuel Tank
• FAT
• SAT
• Warranty
• Delivery - 2015
Workers Hospital (Industrial Area)
Client Name: Private Engineering office

Main Contractor: MIDMAC Contracting
Sub-Contractor: Voltas Limited Qatar
Consultant: Dar El Handasa
Scope of Work:

• 8xC2000 D5 Paralleling
• Spare parts
• Ni Cd Batteries
• Daily Fuel Tank
• Cables Supply
• FAT
• SAT
• Warranty
• Delivery - 2015
Workers Hospital (Ras Laffan)
Client Name: Private Engineering Office

Main Contractor: Qatar Arabian Contracting (QACC )
Sub-Contractor: ETA Star
Consultant: Dar El Handasa
Scope of Work:

• 8xC2000 D5 Paralleling
• Spare parts
• Ni Cd Batteries
• Daily Fuel Tank
• SAT
• Warranty
• Delivery - 2015
Doha Convention Center and Tower
Client Name: Qatar Tourism Authority

Main Contractor: Midmac-Sixcontruct JV
Sub-Contractor: ETA-Debbas JV
Consultant: Hyder
Scope of Work:
Rated Power : 6MW – 7.5 MVA

• 3x C2500D5A (S) 2500KVA
• DMC 200
• 11kV Tantalization Panel
• Fuel Tanks
• NGR
• Genset Enclosure
• SWGR- Enclosure
• Ni Cd battery
• Engineering
• FAT
• SAT
• Warranty
• Delivery - 2013
Doha Convention Center and Tower
38
Water Security Mega Reservoirs Package A&C
Client Name: Kahramaa
Main Contractor: CCC-Teyseer
Consultant: Hyder Consulting
Scope of Work:
Rated Power : 8.1MVA (6.4MW)

• 2xC1100D5, 1xDQGAM, 2xC2250D5, 1xC2750D5
• Fuel Tanks
• Engineering
• Installation material
• FAT
• SAT
• Supervision, Commissioning & Start up
• Warranty
• Maintenance contract
• Delivery - 2017
New Port Project /NPP - 047
Client Name: Doha New Port
Main Contractor: CDC - BOOM
Consultant: AECOM
Scope of Work:
Rated Power : 12.5MVA (10MW)

• 1xC700D5, 2xC900D5, 4xC1100D5, 4xC1400D5, 1xC1675D5A
• Fuel Tanks
• Ni Cd battery
• Engineering
• FAT
• SAT
• Installation supervision, Commissioning & Start up
• Warranty
• Delivery - 2016
Doha West Sewage Treatment Works
Client Name: Ashghal
Main Contractor: Suez
Consultant: EGIS
Scope of Work:
Rated Power : 11.3MVA (9MW)

• 2xDQGAM, 4xC2250D5, 1xC550D5e
• Fuel Tanks
• Engineering
• FAT
• SAT
• Installation material supply
• Genset Enclosures
• Warranty
• Delivery - 2016
FIFA Al-Wakrah Stadium
Client Name: Supreme Committee for Delivery & Legacy
Main Contractor: MIDMAC Contracting
Consultant: AECOM
Scope of Work:
Rated Power : 3 MVA (2.4MW)

• 2xC1675D5A
• Fuel Tanks
• Engineering
• FAT
• SAT
• Ni Cd Batteries
• Warranty
• Delivery - 2017
Other Relevant Projects in Middle East &
Asia
Dubai Airport
Dubai Port
Delhi Metro
Cleveland Clinic Abu Dhabi ( 27 MVA )
Hydra Properties – Distillation Plant Abu Dhabi ( 60MVA )
EMAL Power Plant - Abu Dhabi ( 18 MVA )
Sheikh Khalifa Palace Quessera – Abu Dhabi (11.250 MVA )
43
Combination Mobile unit for Desalination plant
User/Contractor : Hydra Properties/PAL Technologies- Abu
Dhabi20 x C2250D5 + 20 x C1100D5
Cummins Middle East Scope includes the Engineering, supply, complete manufacturing for
enclosure, testing & commissioning of the Power Generation Equipment
48MW / 60MVA Project
6.4MW Project /8MVA
20x C2250D5
20x C1100D5
20x C400D5
20x Synchronizing Panel
20x Attenuated Enclosure with
Base Fuel Tank
Cleveland Hospital Sowwah Island – Abu Dhabi
Cummins Middle East Scope includes the following:

Engineering,
supply,
installation supervision,
testing & commissioning of the Emergency Diesel
Power Generation System.
12 nos C2500 Diesel Generator rated 2000kw / 2500Kva
Prime for Stand By Application - 11 kV Alternator
11Kv/400 v Transformer
Master control panel.
Heat Exchanger
ATS Controller
Aftermarket
Capability
Cummins Qatar
17/05/2018
Public
Table of Contents
1 Aftermarket Org Structure
2 Aftermarket - Parts Org Structure
3 Resources Summary
4 Workshop - Vans.
5 Tools - Training - Parts - Factory Support
6 Master Rebuild Center – Contracts
7 Response Time
47
Aftermarket Capability
Organization Structure
Aftermarket Manager
Elias Tabanji
Parts Manager Service Supervisor

Ramez Georgy Irudayaraj Peter
48
Parts Org Structure
Aftermarket Manager
Elias Tabanji
Parts Manager
Ramez Georgy
Parts Sales Executive Parts Sales Executive Counter Team Leader

Mohit Dhingra Hicham Ikhlef Jayabalan Venkadesh
CSR
Arthur Orbigo
CSR
Noble Paul
49
Service Org Structure
Aftermarket Manager
Elias Tabanji
Service Supervisor DFSE AMC&W Admin & Parts Specialist

Irudayaraj Peter Mithilesh Pal Vacant
Workshop Parts Field CSA

PG - CSA Service Writer W/S&PG
/S&PG -CSA
CSA
Specialist Marine/Ind/Auto
Victor Pereira Kristine Omandam Om Anil Vacant Patrick Tirona
Field Service Tech Field Service Tech W/S Tech Field Service Tech
Rahul Kumar Prudencio Batanagan Hector Santos Joe Marie Agriam
W/S Tech Field Service Tech

Field Service Tech Electrical Technician Ayyalusamy Venkatesh Carlo Manalansan
Roberto Pantoja Sethilkumar .D
W/S Cleaner Field Service Tech

Manoj Kumar Mark Antony
Field Service Tech

Khan Mohamed
Resources Summary
• Service Resources:
௅ 10 Technicians.
௅ 3 Customer Service Advisors.
௅ A Divisional Field Service Engineer.
௅ Support Functions (Admin, Warranty & AMC, Parts Specialist).
• Parts Resources:
௅ 3 Parts Sales Executives (1 Single Point of Contact For Each Customer).
௅ 2 Customer Sales Representatives.
51
Workshop - Vans
• Workshop Facility:
௅ 2,200 m2 Workshop.
௅ Air Conditioned Engine Overhaul Area.
௅ Full Repair, Overhaul and Load Testing Capability.
• Mobile Workshop Vans:
௅ 6 Mobile Workshop Vans.
௅ 2 Pickup.
52
Tools – Training – Parts – Factory Support
• Special Tooling:
௅ 100% Special Tools availability to support Qatar market engine population.
• Technician’s Training Program:
௅ Training Qualification Program implemented for all Cummins product range in Qatar Market.
௅ Training is delivered in our Regional Training Facility in Jebel Ali – UAE by a Certified Factory
Trainer on Live engines.
• Parts Availability:
௅ Parts stock is available to cover Qatar market engine population.
௅ Cummins Qatar have access to the Parts Distribution Centers around the world.
௅ Parts & Consignment Stock Agreements are offered.
• Factory Support:
௅ Cummins Qatar have direct access to Factory Service & Application Engineering.
53
MRC – Maintenance Contracts
• HHP Master Rebuild Center – Jebel Ali:

௅ Rebuild Center holds Swing Engines on Shelf.
௅ Access to Master Rebuild Center enable Cummins Qatar to offer customers engine
replacement plans in emergency cases to reduce downtime.
• Maintenance Contracts:
௅ Cummins Qatar offer contracts based on factory maintenance guidelines.
54
Response Time
• Response Time:
Standard Response Time is based on the failure Priority Level as per below table:
Reactive / Preventive Maintenance Priority and Response Time: 24/7
Priority Definition Response Time
- Provide response plan with 1 hrs.

Engine down situations where engine operation is not possible. The equipment is - Dispatch a Technician within 4 hrs.
Urgent / High Priority
out of operation and production is halted. - Minor Repairs to be completed within 24 hrs.
- Major Repairs to be completed within 72 hrs.
- Provide response plan with 8 hrs.

None-Urgent / Low None Engine Down situations where the reported fault is not affecting engine
- Dispatch a Technician within 24-48 hrs.
Priority operation. The equipment is still operational and production can continue.
- Complete Repairs within 72 hrs.
- Provide service plan within 1 Week.

Services that can wait until a regular visit without having a negative impact to the
Routine - Complete the job as planned. Time frame will
client/business operation. Mainly preventive maintenance services.
depend on the scope size.
55
2. Project reference
PROJECT REFERENCE LIST
MAJOR PROJECTS- 2006 to 2020
PROJECT NAME CLIENT CUSTOMER MAIN GENSET SCOPE OF WORK

CONTRACTOR MODEL
NEW NAVAL BASE PROJECT HAMAD PORT QBC MSF JV QBC MSF JV 1x C1100D5 SUPPLY, INSTALLATION,
(NPP50) EXPANSION 1x DFEK TESTING & COMMISSIONING
1x C330D5
2x C150D5
KATARA TOWERS KATARA CONSPEL HBK CONTRACTING 6x C2750D5 SUPPLY, SUPERVISION OF
HOSPITALITY 1x DMC8000 INSTALLATION, TESTING &
COMMISSIONING
SHAFT 22A ASHGHAL AUCC AUCC 4x C1400D5 SUPPLY, INSTALLATION,
TESTING & COMMISSIONING
ISF CAMP -SHADED STAGE ISF AL JABER AL JABER ENGINEERING 1x C400D5 SUPPLY, INSTALLATION
PARKING AREA ENGINEERING MATERIALS , TESTING &
COMMISSIONING
MSHERIB DOWN TOWN MSHERIB CCC CCC 1x C1100D5 SUPPLY, INSTALLATION
DOHA – MADDITIONAL UNIT PROPERTIES MATERIALS , TESTING &
COMMISSIONING
AL KHOR HEALTH CENTRE HMC ELECTROWATT ELECTROWATT 1x C1400D5 SUPPLY, SUPERVISION OF
INSTALLATION, TESTING &
COMMISSIONING
P115 LUSAIL PROJECT LUSAIL RAMACO TRADING RAMACO TRADING 1X C350D5B SUPPLY, SUPERVISION OF
DEVELOPMENT 1X C150D5 INSTALLATION, TESTING &
COMMISSIONING
DOHA COLLEGE DOHA COLLEGE STREAM INDUSTRIAL & STREAM INDUSTRIAL & 1X C170D5 SUPPLY, SUPERVISION OF
ENGINEERING ENGINEERING 1X C275D5 INSTALLATION, TESTING &
1X C450D5 COMMISSIONING
1X C66D5L
CONSTRUCTION OF WATER QATAR UNIVERSITY MEP ENTERPRISES MEP ENTERPRISES 1x C1100D5B SUPPLY, SUPERVISION OF
NETWORK – QATAR INSTALLATION, TESTING &
UNIVERSITY COMMISSIONING
WAREHOUSE & WORKSHOP RLIC GALFAR AL MISNAD GALFAR AL MISNAD 1x C2250D5 SUPPLY, SUPERVISION OF
AT RLIC - SI -14 INSTALLATION, TESTING &
COMMISSIONING
NEW NAVAL BASE PROJECT HAMAD PORT QBC MSF JV QBC MSF JV 1x DQGAM SUPPLY, INSTALLATION,
(NPP50) 1x C1100D5 TESTING & COMMISSIONING
1x C400D5
HAMAD INTERNATIONAL HIA CCC CCC TEYSEER JV 1x C1100D5 SUPPLY, SUPERVISION OF
AIRPORT (HIA) JET A1 1x C275D5 INSTALLATION, TESTING &
COMMISSIONING
HAMAD PORT PROJECT – HAMAD PORT IMCO IMCO 2x C1100D5 SUPPLY, SUPERVISION OF
VISITOR CENTRE INSTALLATION, TESTING &
COMMISSIONING
FOUL SEWAGE SITE B ASHGHAL METITO METITO 1x C1100D5 SUPPLY, INSTALLATION,
TESTING & COMMISSIONING
QATAR FOUDATION QATAR FOUDATION CONSPEL JPAC JOINT VENTURE 9x C2250D5 SUPPLY, SUPERVISION OF
STADIUM INSTALLATION, TESTING &
COMMISSIONING
ISF CAMP CPC08Q ISF AL BALAGH TRAGS ENGINEERING 4x C1675D5A SUPPLY, SUPERVISION OF
COMMISSIONING
HPP 0085 HAMAD PORT Al JABER ENGINEERING Al JABER ENGINEERING 4x C2750D5 SUPPLY, SUPERVISION OF
1x DMC8000 INSTALLATION, TESTING &
COMMISSIONING
QATAR ACADEMY QATAR ACADEMY TRAGS ENGINEERING TRAGS ENGINEERING 1X C1400D5 SUPPLY, SUPERVISION OF
EXPANSION INSTALLATION, TESTING &
COMMISSIONING
GOLF CLUB EDUCATION CITY QATAR AMLAK AMLAK 1X C275D5 SUPPLY & COMMISSIONING
FOUNDATION
1|Page

CONTRACTOR MODEL
VODAFONE QATAR VODAFONE VODAFONE QATAR VODAFONE QATAR 52X C22D5T SUPPLY, INSTALLATION,
TELECOM TOWERS 5X C33D5 TESTING & COMMISSIONING
SARAB CAMP TORCH HOTEL SUPREME SUPREME COMMITTIEE 2X C550D5E SUPPLY, INSTALLATION,
COMMITTIEE FOR FOR DELIVERY AND 1X C110D5 TESTING & COMMISSIONING
DELIVERY AND LEGACY LEGACY
PRIME POWER RENTAL PRIME POWER PRIME POWER RENTAL PRIME POWER RENTAL 5X C44D5L SUPPLY & COMMISSIONING
RENTAL 2X C55D5L
2X C66D5L
8X C1000D2R
HAMAD MEDICAL CENTRE HMC TRAGS ENGINEERING TRAGS ENGINEERING 1X C1675D5 SUPPLY, SUPERVISION OF
COMMISSIONING
P116 & P117 3B+G+M+5 JAIDAH REAL RAMACO TRADING & RAMACO TRADING & 2X C220D5e SUPPLY & COMMISSIONING
OFFICE BUILDING ESTATE CONTRACTING CONTRACTING
WORK SHOP & LABOUR OUTLOOK TRADING OUTLOOK TRADING & OUTLOOK TRADING & 1x C440D5 SUPPLY & COMMISSIONING
CAMP CONTRACTING CONTRACTING
WOMENS HOSPITAL SAFETY HMC MIDMAC MIDMAC CONTRACTING 3x C2250D5 SUPPLY, INSTALLATION,
IMPROVEMENT-1 CONTRACTING 2x C170D5 TESTING & COMMISSIONING
1x DMC8000
1x TOTALIZATION
PANEL
EMERGENCY WORKS AT AL ASHGHAL METITO OVERSEAS METITO OVERSEAS 8x C220D5e SUPPLY, SUPERVISION OF
WUKAIR QATAR QATAR INSTALLATION, TESTING &
COMMISSIONING
ABU HAMOUR SHAFT 22A ASHGHAL METITO OVERSEAS METITO OVERSEAS 2x C1675D5 SUPPLY, SUPERVISION OF
QATAR QATAR INSTALLATION, TESTING &
COMMISSIONING
NEW COLLEGE OF QATAR UNIVERSITY MEGATEC AL DARWISH 2x C1100D5 SUPPLY, SUPERVISION OF
ENGINEERING QATAR CONTRACTING ENGINEERING REMOTE INSTALLATION, TESTING &
UNIVERSITY RADIATOR,PHE COMMISSIONING
AL KHOR HEALTH CENTRE HMC AL TWAFEEQ & AL TWAFEEQ & 2x C220D5e SUPPLY & COMMISSIONING
PARTNERS PARTNERS CONTRACTING
CONTRACTING
AIN KHALED HEALTH CENTRE HMC AL TWAFEEQ & AL TWAFEEQ & 2x C220D5e SUPPLY & COMMISSIONING
PARTNERS PARTNERS CONTRACTING
CONTRACTING
SHIELD 5 QATAR ARMED AL SEAL CONTRACTING AL SEAL CONTRACTING 2x C44D5L SUPPLY & COMMISSIONING
FORCES 2x C55D5L
1x C66D5L
AL RAYYAN STADIUM SUPREME AL JABER AL JABER ENGINEERING 1x C330D5 SUPPLY, SUPERVISION OF
COMMITTIEE FOR ENGINEERING INSTALLATION, TESTING &
DELIVERY AND COMMISSIONING
LEGACY
POULTRY FARM JAMAILYA POULTRY FARM DERWIND TRADING & DERWIND TRADING & 2x C110D5 SUPPLY & COMMISSIONING
CONTRACTING CONTRACTING
VILLA AT LEJBEI PRIVATE OWNER DERWIND TRADING & DERWIND TRADING & 1x C110D5 SUPPLY & COMMISSIONING
CONTRACTING CONTRACTING
HERTZ RENTAL HERTZ HERTZ RENTAL HERTZ RENTAL 1x C550D5e SUPPLY
CONSTRUCTION BYPASS ASHGHAL METITO OVERSEAS METITO OVERSEAS 1x C1675D5A SUPPLY, SUPERVISION OF
STATION QATAR QATAR INSTALLATION, TESTING &
COMMISSIONING
2|Page

CONTRACTOR MODEL
TRANSPORT STORE TRANSPORT STORE DESERT LINE DESERT LINE 1x C330D5 SUPPLY, & COMMISSIONING
AL RAYYAN STADIUM SUPREME STRUCTURAL QATAR STRUCTURAL QATAR 4x C55D5L SUPPLY, & COMMISSIONING
COMMITTIEE FOR 4x C33D5
DELIVERY AND
LEGACY
AL QATARIA STEEL FACTORY AL QATARIA STEEL AL QATARIA COMPANY AL QATARIA COMPANY 1x C2250D5 SUPPLY, SUPERVISION OF
FACTORY OF REINFORCING OF REINFORCING STEELS INSTALLATION, TESTING &
STEELS COMMISSIONING
MEGA RESERVOIR PACKAGE- KAHRAMAA CHINA-GEZHOUBA CHINA-GEZHOUBA 1x C2250D5 SUPPLY, SUPERVISION OF
E GROUP CO LTD GROUP CO LTD 1x DQGAM INSTALLATION, MATERIALS,
1x C1100D5 TESTING & COMMISSIONING
QATAR FOUNDATION QATAR JPAC JV JPAC JV 9x C2250D5 SUPPLY, SUPERVISION OF
STADIUM FOUNDATION INSTALLATION, TESTING &
COMMISSIONING
HPP/NPP #89 SBN CONTRACTING SBN CONTRACTING SBN CONTRACTING 5x C66D5L SUPPLY & COMMISSIONING
1x C22D5
1x C170D5
CHEMICAL FACTORY KLJ ORGANIC KLJ ORGANIC KLJ ORGANIC 1x C2250D5 SUPPLY, SUPERVISION OF
COMMISSIONING
NEW ORBITAL HIGHWAY LEIGHTON AL JABER LEIGHTON AL JABER LEIGHTON AL JABER ENG 4x C110D5 SUPPLY & COMMISSIONING
ENG JV ENG JV JV 8x C33D5
3x C38D5
2x C44D5L
4x C55D5L
14x C66D5L
ENERGY CENTRE AT AL SUPREME TRAGS ENGINEERING TRAGS ENGINEERING 1x C330D5 SUPPLY, SUPERVISION OF
RAYYAN STADIUM COMMITTIEE FOR INSTALLATION, TESTING &
LEGACY
WEST BAY LAGOONA VILLA TRAGS TRAGS ENGINEERING TRAGS ENGINEERING 1x C1400D5 SUPPLY, SUPERVISION OF
COMMISSIONING
QATAR DRUG HOUSE DOHA DRUG STORE SNOW FOG SNOW FOG 1x C550D5e SUPPLY, SUPERVISION OF
COMMISSIONING
ZULAL DESTINATION SPA ZULAL PIONEER PIONEER CONTRACTING 1x C700D5 SUPPLY, SUPERVISION OF
DESTINATION SPA CONTRACTING INSTALLATION, TESTING &
COMMISSIONING
QP – DUKHAN SEWAGE QATAR PETROLEUM METITO METITO 1x C1100D5 SUPPLY, SUPERVISION OF
TREATMENT WORKS 1x DMC1000 INSTALLATION, TESTING &
COMMISSIONING
MSHERIB DOWN TOWN MSHERIB CCC CCC 1x DQGAM SUPPLY, INSTALLATION
DOHA – MP2 PH 2.3.4 PROPERTIES 2x C1675D5A MATERIALS , TESTING &
1x C1675D5 COMMISSIONING
4x C1400D5
1x C400D5
DOHATNA WARE HOUSE – ALI BIN ALI ALI BIN ALI ALI BIN ALI 1x C1675D5 SUPPLY, INSTALLATION,
Package 2 1x C1100D5B TESTING & COMMISSIONING
TRANSPORT STORE DESERT LINE DESERT LINE DESERT LINE 1x C330D5 SUPPLY, SUPERVISION OF
COMMISSIONING
VODAFONE QATAR VODAFONE VODAFONE VODAFONE 100x C22D5 SUPPLY, INSTALLATION,
TELECOM PROJECT 15x C33D5 TESTING & COMMISSIONING
3|Page

CONTRACTOR MODEL
LUSAIL STADIUM WORKS HBK HBK HBK 14x C330D5 SUPPLY & COMMISSIONING
HBK HEADQUARTER HBK HBK Engineering HBK Engineering 1x C1100D5B SUPPLY, SUPERVISION OF
COMMISSIONING
AL MANSOORI TOWER AL MANSOORI ECE ECE 1x C1100D5B SUPPLY, SUPERVISION OF
COMMISSIONING
MEGA RESERVOIR A&C KAHRAMAA CCC CCC 2x C2250D5 SUPPLY, SUPERVISION OF
1x C2750D5 INSTALLATION, MATERIALS,
2x C1100D5 TESTING & COMMISSIONING
1x DQGAM
WAKRAH STADIUM SUPREME MIDMAC MIDMAC CONTRACTING 2x C1675D5A SUPPLY, SUPERVISION OF
COMMITTIEE FOR CONTRACTING INSTALLATION, TESTING &
LEGACY
NEW PORT PROJECT #67 HAMAD PORT SALAM TECHNOLOGY SALAM TECHNOLOGY 8x DQGAM SUPPLY, SUPERVISION OF
COMMISSIONING
DOHATNA WARE HOUSE – ALI BIN ALI ALI BIN ALI ALI BIN ALI 2x C1675D5 SUPPLY, INSTALLATION,
Package 1 4x C1100D5B TESTING & COMMISSIONING
1x C825D5
1x C400D5
1x C220D5e
NEW PORT PROJECT #67 HAMAD PORT SALAM TECHNOLOGY SALAM TECHNOLOGY 8x C1400D5 SUPPLY, SUPERVISION OF
COMMISSIONING
SHAFT PUMPING STATION ASGHAL METITO METITO 4x C700D5 SUPPLY, SUPERVISION OF
COMMISSIONING
SEEF PRESENTATION CENTRE LUSAIL TARGET ELECTRICAL HASSANESCO 1x C450D5e SUPPLY, SUPERVISION OF
COMMISSIONING
AL WAJBA PALACE – PHASE HILAL JEHAM AL- MIDMAC MIDMAC CONTRACTING 4x DQGAM SUPPLY, SUPERVISION OF
1 KUWARI CONTRACTING 1x TOTALIZING INSTALLATION, TESTING &
SWGR PANEL COMMISSIONING
1x DMC1000
HAMAD MEDICAL HOSPITAL HMC TRAGS ENGINEERING TRAGS 1x DQGAM SUPPLY, SUPERVISION OF
COMMISSIONING
AL OBAIDLY PUMPING ASGHAL METITO METITO 2x C700D5 SUPPLY, SUPERVISION OF
STATION INSTALLATION, TESTING &
COMMISSIONING
AL KHARAEEZ TOWER AL KHARAEEZ QMMC QMMC 1x C550D5e SUPPLY, SUPERVISION OF
TOWER INSTALLATION, TESTING &
COMMISSIONING
AL KHOR PUMPING STATION ASGHAL METITO METITO 1x C700D5 SUPPLY, SUPERVISION OF
COMMISSIONING
ASPIRE TSE PLANT ASPIRE ZONE SUEZ SUEZ 3x C1400D5 SUPPLY, SUPERVISION OF
1x DMC1000 INSTALLATION, TESTING &
COMMISSIONING
DOHA WEST SEWAGE ASGHAL SUEZ SUEZ 1x C2250D5 690V SUPPLY, SUPERVISION OF
TREATMENT WORKS-DW5 3x C2250D5 INSTALLATION, TESTING &
2x DQGAM COMMISSIONING
1x C550D5e
NEW PORT PROJECT #47 HAMAD PORT CDC BOOM JV CDC BOOM JV 1x C1675D5A SUPPLY, SUPERVISION OF
4x C1400D5 INSTALLATION, TESTING &
4xC1100D5 COMMISSIONING
4|Page

CONTRACTOR MODEL
2xC900D5
1xC700D5
NEW PORT PROJECT #57 HAMAD PORT SINOHYDRO-UCE JV SINOHYDRO-UCE JV 5x DQGAM SUPPLY, SUPERVISION OF
1x C1400D5 INSTALLATION, TESTING &
2x C550D5e
1x C400D5e
NEW PORT PROJECT #57 HAMAD PORT MULTI ENERGY QATAR SINOHYDRO-UCE JV 2x DQGAM SUPPLY, SUPERVISION OF
COMMISSIONING
UMM AL HOUL POWER QGEWC ACCIONA SAMSUNG C&T 1x DQGAM SUPPLY, SUPERVISION OF
COMMISSIONING
LUSAIL CAR PARK LUSAIL LIGHTNING LIGHTNING 4x C1400D5 SUPPLY, SUPERVISION OF
DEVELOPMENT ELECTROMECHANICAL ELECTROMECHANICAL INSTALLATION, TESTING &
COMMISSIONING
SALWA BEACH RESORT SALWA BEACH LIGHTNING LIGHTNING 1x C700D5 SUPPLY, SUPERVISION OF
RESORT ELECTROMECHANICAL ELECTROMECHANICAL 2x C1400D5 INSTALLATION, TESTING &
NOURA PARK NOURA PARK SHANNON SHANNON ENGINEERING 1x C900D5 SUPPLY, SUPERVISION OF
ENGINEERING INSTALLATION, TESTING &
COMMISSIONING
CITY CENTRE AL AAMAL GROUP QMMC QMMC 1x C1100D5 SUPPLY, SUPERVISION OF
RECONSTRUCTION _PH 2 INSTALLATION, TESTING &
COMMISSIONING
NOZUL PROJECT JAIDAH GROUP TRAGS ELECTRICAL TRAGS ELECTRICAL ENGG 1x C1400D5 SUPPLY, SUPERVISION OF
ENGG INSTALLATION, TESTING &
COMMISSIONING
HORSE OWNERS COMPLEX- EQUISTRIAN CLUB UNITED UNITED 1x C1675D5A SUPPLY, SUPERVISION OF
PH2 ELECTROMECHANICAL ELECTROMECHANICAL INSTALLATION, TESTING &
COMMISSIONING
NPP #67 PORT BUILDING & NEW PORT PROJECT CDC CDC 1x C1675D5A SUPPLY, SUPERVISION OF
INFRASTRUCTURE PACKAGE 1x C1675D5 INSTALLATION, TESTING &
1 COMMISSIONING
QATAR FOUNDATION GOLF QATAR CONTRACO CONTRACO 2x DQGAM SUPPLY, SUPERVISION OF
CLUB FOUNDATION INSTALLATION, TESTING &
COMMISSIONING
NEW PORT PROJECT #26 NEW PORT PROJECT CCC-TCC JV CCC-TCC JV 1x C500D5e (S) SUPPLY, SUPERVISION OF
3x C1100D5 (S) INSTALLATION, TESTING &
2x C1675D5A COMMISSIONING
2x C900D5
INSTALLATION
MATERIALS
VILLAGIO PROJECT VILLAGIO QATAR NORWEGIAN QATAR NORWEGIAN 1x C700D5 SUPPLY, SUPERVISION OF
GERMAN/ADGSC GERMAN/ADGSC INSTALLATION, TESTING &
COMMISSIONING
ENERGY CENTRE AT KHALIFA ASPIRE ZONE GALFAR AL MISNAD MIDMAC 2x C2250D5 SUPPLY, SUPERVISION OF
STADIUM 1x DMC1000 INSTALLATION, TESTING &
COMMISSIONING
WORKERS HOSPITAL – RAS HAMAD MEDICAL ETA STAR ETA STAR 8x C2000D5 SUPPLY, SUPERVISION OF
LAFFAN INDUSTRIAL AREA CORP INSTALLATION, TESTING &
COMMISSIONING
NEW PORT PROJECT #0032 NEW PORT PROJECT TRANSGULF IEM TRANSGULF IEM 7x C2750D5 SUPPLY, SUPERVISION OF
COMMISSIONING
MINISTRY OF FINANCE STATE OF QATAR AL MUNTASSER AL MUNTASSER 1X C1675D5 SUPPLY, SUPERVISION OF
BUILDING, CORNICHE INSTALLATION, TESTING &
COMMISSIONING
5|Page

CONTRACTOR MODEL
NEW PORT TEMP YARD NEW PORT PROJECT QATARI QATARI DEVELOPMENT 1x C1100D5 SUPPLY, SUPERVISION OF
DEVELOPMENT INSTALLATION,
COMMISSIONING
KHALIFA STADIUM KHALIFA STADIUM MIDMAC MIDMAC CONTRACTING 1x C700D5 3x SUPPLY, SUPERVISION OF
CONTRACTING C550D5e INSTALLATION,
COMMISSIONING
LUSAIL MARINA 052 LUSAIL METRIX QATAR MAN ENTERPRISES 1X C550D5e SUPPLY, SUPERVISION OF
DEVOLOPMENT INSTALLATION,
COMMISSIONING
WEDDING HALL WEDDING HALL QTEC QTEC 1x C1100D5 SUPPLY, SUPERVISION OF
INSTALLATION,
COMMISSIONING
NEW PORT PROJECT #0026 NEW PORT PROJECT CCC CCC TEYSEER JV 4x C2750D5 SUPPLY, SUPERVISION OF
INSTALLATION,
COMMISSIONING
NURSERY QATAR AALCO AALCO 1x DQGAM SUPPLY, SUPERVISION OF
FOUNDATION INSTALLATION,
COMMISSIONING
QATAR FOUNDATION – QATAR CONTRACO CONTRACO 1x DQGAM SUPPLY, SUPERVISION OF
GOLF COURSE FOUNDATION INSTALLATION,
COMMISSIONING
GENERAL GUARD MOI DOHA SWITCHGEAR DOHA SWITCHGEAR 1x C1675D5A SUPPLY, SUPERVISION OF
INSTALLATION,
COMMISSIONING
WORKERS HOSPITAL – HAMAD MEDICAL VOLTAS LIMITED VOLTAS LIMITED 8x C2000D5 SUPPLY, SUPERVISION OF
INDUSTRIAL AREA CORP INSTALLATION,
COMMISSIONING
MESAIMEER TUNNEL ASHGHAL METITO OVERSEAS METITO OVERSEAS 2x C1675D5A SUPPLY, SUPERVISION OF
PUMPING STATION QATAR LLC QATAR LLC INSTALLATION,
COMMISSIONING
QATAR FOUNDATION QATAR STERLING & WILSON STERLING & WILSON 1x C1675D5A 1x SUPPLY, SUPERVISION OF
SOUTH EAST CAR PARK FOUNDATION C1100D5B INSTALLATION,
COMMISSIONING
TJ PEARL MANSION TJ PEARL MANSION MIDMAC MIDMAC CONTRACTING 2x DQGAM with SUPPLY, SUPERVISION OF
CONTRACTING PHE 1x C350D5 INSTALLATION,
with PHE
QATAR ECONOMIC ZONE QATAR ECONOMIC COMMITMENT ENGG COMMITMENT ENGG 3x C700D5 1x SUPPLY, SUPERVISION OF
ZONE WORKS WORKS TOTALIZING PANEL INSTALLATION,
QATAR UNIVERSITY – MALE QATAR UNIVERSITY AL TAMEZ COMMODORE 1x DQGAM 2x SUPPLY, SUPERVISION OF
& FEMALE CLASS ROOM C1100D5 INSTALLATION,
CONST. OF INTEGRATED QATAR PETROLEUM TARGET ENGINEERING TARGET ENGINEERING 1x 800KVA – SUPPLY, COMMISSIONING
CHILLER, FREEZER, QST30G4 – Special
LAUNDRY, DINING & Genset
ACCOM. FACILITIES IN
HALUL ISLAND QATAR
WELLNESS CENTRE WELLNESS CENTRE AL MOYYED ENGG AL MOYYED ENGG 2XC1100D5 SUPPLY, SUPERVISION,
1XC1675D5A
SAMRYA TOWER SAMRYA TOWER CRC CRC 1XDQGAM SUPPLY, SUPERVISION,

INSTALLATION
AL MEERA SUPERMARKET AL MEERA SHANNON ENGG SHANNON ENGG 2XC1100D5 SUPPLY, SUPERVISION,
SHERATON PARK PROJECT SHERATON PARK HBK ENGG SERVICES HBK ENGG SERVICES 3XC2250D5 SUPPLY, SUPERVISION,
PROJECT
6|Page

CONTRACTOR MODEL
SAMRYA SUITES SAMRYA SUITES ECE ECE 1XDQGAM SUPPLY, SUPERVISION,

INSTALLATION
LUSAIL 6C LUSAIL HBK ENGG SERVICES HBK ENGG SERVICES 2XDQGAM SUPPLY, SUPERVISION,
DEVELOPMENT 1XC1100D5
RENTAL GENSETS PRIME POWER PRIME POWER PRIME POWER 10X C1250D2R SUPPLY, SUPERVISION
2XC1000D2R
QATAR UNIVERSITY- QATAR UNIVERSITY SEG SEG 2XC1400D5 SUPPLY, SUPERVISION,

STUDENT HOUSING 10XC300D5 INSTALLATION
2XC250D5
SHERATON RENOVATION SHERATON HOTEL EFECO-RADIANT EFECO-RADIANT 2XC1400D5 SUPPLY, SUPERVISION,
PROJECT
CP300B HAMAD MDEICAL HAMAD MEDICAL SHINBO HYUNDAI 1XC1675D5 SUPPLY, SUPERVISION,
CITY CORP INSTALLATION
QSTEC POLYSILICON QSTEC PUNJ LLOYD PUNJ LLOYD 4X OIL&GAS SUPPLY, SUPERVISION,
FACTORY CUSTOMIZED
PACKAGE
QATAR HANDBALL INTERNAL SECURITY VOLTAS VOLTAS 4x 1825 DQGAM SUPPLY, SUPERVISION,
ASSOCIATION COMPLEX- FORCE 1x C2250D5 1x
STADIUM C700D5
SALWA RESORT SALWA RESORT EL BADR EL BADR 1x C900D5 1x SUPPLY, SUPERVISION,
C220D5e
US ARMY-BLATCHFORD US ARMY RIZZANI RIZZANI 1x C1000D5 SUPPLY, SUPERVISION,

PRESTON COMPLEX SILENT TYPE
RENTAL PRIME POWER PRIME POWER PRIME POWER 3x C550D5 SUPPLY,
QP – FAHAHIL GAS STATION QATAR PETROLEUM DOPET DOPET 1x C700D5 1x SUPPLY, SUPERVISION,
C1000D5
HILTON HOTEL HILTON HOTEL TRAGS TRAGS 1x C1100D5 SUPPLY, SUPERVISION,
HAMAD MEDICAL HAMAD MEDICAL NCTES NCTES 1x C700D5 SUPPLY, SUPERVISION,

CORP
QP IT BUILDING QATAR PETROLEUM INSHA C&T INSHA C&T 2x C1400D5 1x SUPPLY, SUPERVISION,
DMC1000
NATIONAL MUSEUM QATAR MUSEUMS BK GULF HYUNDAI 4x C2750D5 1x SUPPLY, SUPERVISION,

AUTHORITY DMC200
TWIN TOWER TWIN TOWER EFECO ARABTEC 4x C900D5 SUPPLY, SUPERVISION,
SHOWROOM SHOWROOM JAIDAH JAIDAH 1x C900D5 SUPPLY, SUPERVISION,
BURJ MARINA-LUSAIL CITY BURJ MARINA- AL FUTTAIM AL FUTTAIM 1xC1400D5 SUPPLY, SUPERVISION,
LUSAIL CITY
7|Page

CONTRACTOR MODEL
QATAR FOUNDATION QATAR HITACHI MIDMAC 2X C2000D5 1x SUPPLY, INSTALLATION

FOUNDATION C1100D5
MAJLIS & MOTEL MAJLIS & MOTEL MAPCO URBACON 1X C1100D5 SUPPLY, SUPERVISION, UNDER
INSTALLATION
HMC MEDICAL CITY HAMAD MEDICAL SHINBO HYUNDAI 6XC2250D5 SUPPLY & INSTALLATION
CORP .UNDER INSTALLATION
AL BARAHA TOWER - LUSAIL AL BARAHA TOWER CRC CRC 1X C1100D5 SUPPLY, SUPERVISION, UNDER
- LUSAIL INSTALLATION
HMC MEDICAL HAMAD MEDICAL HBK ENGG HBK ENGG 1XC1675D5A SUPPLY, SUPERVISION, UNDER
CORP INSTALLATION
MAJLIS & HOTEL MAJLIS & HOTEL MAPCO URBACON 1XC1675D5A SUPPLY, SUPERVISION, UNDER
INSTALLATION
QATAR FOUNDATION QATAR TRAGS ENGG TRAGS ENGG 1XC1675D5A SUPPLY, SUPERVISION, UNDER
FOUNDATION INSTALLATION
QATAR TOWER QATAR TOWER AL HUDA AL HUDA 1X C1100D5 SUPPLY, SUPERVISION, UNDER
INSTALLATION
UPGRADING OF S/S FOR HAMAD MEDICAL TRAGS ENGG TRAGS ENGG 2X C1675D5, SUPPLY, SUPERVISION, UNDER
HMC- RUMAILAH CORP INSTALLATION
DOHA CONVENTION CENTRE DOHA CONVENTION ETA – DABBAS ETA – DABBAS 3XC2500D5A SUPPLY, SUPERVISION, UNDER
CENTRE ENCLOSED, 11KV INSTALLATION
DMC200,
TOTALIZING
PANEL,
KATARA PROJECT KATARA PROJECT TRAGS ENGG TRAGS ENGG C1675D5A SUPPLY, INSTALL SUPERVISION,
UNDER INSTALLATION
NDIA CP76 NDIA SECCO ENGG SECCO ENGG 2X C1100D5 1x SUPPLY, INSTALL SUPERVISION,
C1400D5 UNDER INSTALLATION
NEW RESEARCH COMPLEX QATAR UNIVERSITY TAKYEEF ELECTRO TAKYEEF ELECTRO C700D5 ENCLOSED SUPPLY, INSTALL SUPERVISION,
MECHANICAL MECHANICAL TYPE & 1000A ATS UNDER INSTALLATION
PANEL
QATAR FOUNDATION CP7 QATAR UNICORP BEMCO UNICORP BEMCO C2500D5A SUPPLY, INSTALL SUPERVISION,
FOUNDATION ALMABANI ALMABANI UNDER INSTALLATION
QATAR FOUNDATION CP QATAR TRAGS ENGG TRAGS ENGG 2X C2500D5A SUPPLY, INSTALL SUPERVISION,
3&6 FOUNDATION UNDER INSTALLATION
REGENT HOTEL REGENT HOTEL SAMKO INTERNATIONL SAMKO INTERNATIONL 3XC1675D5A 1x SUPPLY, INSTALL SUPERVISION,
C900D5 UNDER INSTALLATION
BRICK FACTORY BRICK FACTORY HASSANESCO HASSANESCO 2 X C220D5 SUPPLY, INSTALLATION,

C550D5 COMMISSIONING, TEST AND
TRNG
AL SADD AL SADD SAID AL SHARAN SAID AL SHARAN C1400D5 SUPPLY, INSTALL SUPERVISION,
TRADING TRADING UNDER INSTALLATION
QATAR FOUNDATION- QATAR TRAGS ELECTRICAL TRAGS ELECTRICAL ENGG. C900D5 SUPPLY, INSTALLATION,
TAMU BLDG. FOUNDATION ENGG. COMMISSIONING, TEST AND
TRNG
8|Page

CONTRACTOR MODEL
EGYPT EMBASSY EGYPT EMBASSY QATARY QATARY DEVELOPMENT C1100D5 SUPPLY, INSTALL SUPERVISION,
DEVELOPMENT UNDER INSTALLATION
SAMRYA TWIN TOWERS SAMRYA TWIN MEGATEC MEGATEC 2 X C900D5 SUPPLY, INSTALL SUPERVISION,
TOWERS SYNCHRONIZING UNDER INSTALLATION
TYPE
QATAR UNIVERSITY QATAR UNIVERSITY TAKYEEF ELECTRO TAKYEEF ELECTRO C700D5 ENCLOSED SUPPLY, SUPERVISION, UNDER
MECHANICAL MECHANICAL TYPE & 1250 A ATS INSTALLATION
PANEL
AL WATAN MALL, AL WATAN MALL, AL WATAN MALL AL WATAN MALL C550D5 ENCLOSED SUPPLY, INSTALL SUPERVISION,
MUAITHER MUAITHER TYPE COMMISSIONING, TEST AND
TRNG
NEW OFFICE NEW OFFICE COMMITMENT ENGG. COMMITMENT ENGG. C500D5 ENCLOSED SUPPLY, INSTALL UNDER
TYPE INSTALLATION
QNB BUILDING @ C RING QNB QATAR NATIONAL QATAR NATIONAL BANK C550D5 ENCLOSED SUPPLY, INSTALLATION,
ROAD BANK TYPE, 1250 A ATS COMMISSIONING, TEST AND
TRNG.
JAIDAH COMMERCIAL JAIDAH GROUP ETA ENGINEERING ETA ENGINEERING C1400D5 SUPPLY,SUPERVISION, UNDER
DEVELOPMENT INSTALLATION
COMMERCIAL BANK CBQ HOW UNITED HOW UNITED SERVICES C900D5 ENCLOSED SUPPLY, INSTALL SUPERVISION,
BUILDING SERVICES TYPE COMMISSIONING, TEST AND
TRNG
QATAR FOUNDATION QATAR PETROSERV CONTROLS PETROSERV CONTROLS C200D5 & 400 A SUPPLY, INSTALL SUPERVISION,
FOUNDATION BYPASS ATS. COMMISSIONING, TEST AND
TRNG
THE PEARL QATAR- QANAT THE PEARL QATAR UNITED UNITED DEVELOPMENT 3X C1100D5 SUPPLY, SUPERVISION, UNDER
QUARTIER DEVELOPMENT CO. CO. 4XC825D5 INSTALLATION
3XC550D5
1XC400D5 BYPASS
ATS
WATER TREATMENT PLANT WATER TREATMENT SH. KHALED BIN SH. KHALED BIN HAMAD 2XC550D5 SUPPLY, SUPERVISION, UNDER
PLANT HAMAD BINABDULLAH BINABDULLAH ALTHANI SYNCHRONIZ-ING, INSTALLATION
ALTHANI ENCLOSED.
FACTORY AT INDUSTRIAL FACTORY AT ALUMANA ALUMANA 2XC550D5 SUPPLY, INSTALL SUPERVISION,
AREA INDUSTRIAL AREA SYNCHRONIZ-ING, COMMISSIONING, TEST AND
ENCLOSED. TRNG
AL SADD COMPLEX AL SADD COMPLEX SAMKO SAMKO C1675D5A 2X SUPPLY, SUPERVISION, UNDER
C1000D5 INSTALLATION
QATAR PETROLIUM- QATAR PETROLEUM SIMPLEX INFRA SIMPLEX INFRA 2XC700D5- SUPPLY, INSTALL SUPERVISION,
UMMMBAB & FAHAHIL STRUCTURES STRUCTURES SYNCHRONIZ-ING COMMISSIONING, TEST AND
TRNG
PRECAST FACTORY @ PRECAST FACTORY QATAR INTERNATNL. QATAR INTERNATNL. 2XC550D5 SUPPLY, INSTALL SUPERVISION,
UMMSAEED @ UMMSAEED PRECAST PRECAST SYNCHRONIZ-ING, COMMISSIONING, TEST AND
ENCLOSED. TRNG
NDIA-CP 11 NDIA SECCO ENGG SECCO ENGG C1100D5 SUPPLY, INSTALL SUPERVISION,
COMMISSIONING, TEST AND
TRNG
NDIA-CP 17 NDIA CCIC CCIC 2XC1675D5A SUPPLY, SUPERVISION,
C825D5 C700D5 COMMISSIONING AND
C440D5 C350D5 TESTING
MINISTRY OF INTERIOR- MINISTRY OF AL GHANIM TRADING AL GHANIM TRADING C1100D5 SUPPLY, INSTALL SUPERVISION,
UMMSALAL POLICE STATION INTERIOR COMMISSIONING, TEST AND
TRNG
NAKHILAT SHIP YARD, RLIC NAKHILAT SHIP DAEWOO E & C DAEWOO E & C 2XC550D5 SUPPLY, INSTALL SUPERVISION,
YARD, RLIC SYNCHRONIZ-ING, COMMISSIONING, TEST AND
ENCLOSED. TRNG
9|Page

CONTRACTOR MODEL
COMMERCIAL DEV. @ COMMERCIAL DEV. POWERMECH POWERMECH 2XC1675D5A SUPPLY, SUPERVISION,

GRAND HAMAD STREET @ GRAND HAMAD COMMISSIONING, TEST AND
STREET TRNG
FORIGN SCHOOL QATAR MIDMAC MIDMAC C1675D5A BYPASS SUPPLY, SUPERVISION,
FOUNDATION ATS COMMISSIONING, TEST AND
TRNG
SHK. ALI ALTHANI PALACE @ SHK. ALI ALTHANI CONTRACO CONTRACO 3XC1675D5A SUPPLY, INSTALL SUPERVISION,
AL RAYYAN PALACE @ AL COMMISSIONING, TEST AND
RAYYAN TRNG
PUMPING STATION ASHGHAL NASS TECH NASS TECH 2XC2000D5 & SUPPLY, SUPERVISION,
TRNG
MEDICAL CITY BLD # 21 HAMAD MEDICAL HAMAD MEDICAL HAMAD MEDICAL C350D5 & ATS SUPPLY, INSTALL
CORP CORPORATION CORPORATION SUPERVISION,COMMISSIONIN
G, TEST AND TRNG
RES DEV- VILLA PROJECT RES DEV- VILLA ITCC ITCC 2XC550D5 SUPPLY, INSTALL SUPERVISION,
PROJECT C275D5 COMMISSIONING, TEST AND
TRNG
RO PLANT RO PLANT UDC UDC 3 X C550D5 SUPPLY, SUPERVISION,
PARALELLING COMMISSIONING, TESTING &
ENCLOSED. TRNG.
GATE DEVELOPMENT GATE MAN ENTERPRISE MAN ENTERPRISE 4 X C1100D5 SUPPLY, INSTALL SUPERVISION,
DEVELOPMENT COMMISSIONING, TEST AND
TRNG
CIRCULAR TOWER CIRCULAR TOWER GULF ENGG. GULF ENGG. C1100D5 SUPPLY, SUPERVISION,
TRNG
AKH TOWER AKH TOWER ALMOAYYED A/C ALMOAYYED A/C C1675D5A SUPPLY, SUPERVISION,
COMMISSIONING, TESTING &
TRNG.
PRINTING PRESS PRINTING PRESS DAR AL SHARQ DAR AL SHARQ C700D5 SUPPLY, SUPERVISION,
TRNG
SHOOTING RANGE SHOOTING RANGE AL GHANIM TRADING AL GHANIM TRADING C550D5 SUPPLY, SUPERVISION,
TRNG
NDIA-CP 27 NDIA CCIC CCIC 2X C550D5 SUPPLY, SUPERVISION, UNDER
2XC700D5 COMMISSIONING
AL JASSIM TWR AL JASSIM TWR POWER MECH ENGG. POWER MECH ENGG. C550D5 SUPPLY, SUPERVISION,
TRNG
QP- DUKHAN HOPITAL QATAR PETROLEUM AL HUDA ENGG. AL HUDA ENGG. 3 X C1400D5 DMC SUPPLY, INSTALL SUPERVISION,
200 COMMISSIONING, TEST AND
TRNG
DOHA HIGH RISE DOHA HIGH RISE SAMKO INTER. SAMKO INTER. 2 X C2250D5 & SUPPLY, SUPERVISION,
PARALELLING TRNG
PEARL QATAR PEARL QATAR POER LINE ENGG. POER LINE ENGG. 7X C550D5 SUPPLY, SUPERVISION,
ENCLOSED TYPE COMMISSIONING, TEST AND
TRNG
BARWA COMMERCIAL BARWA HOCHTIEF CONST. HOCHTIEF CONST. 12 X C440D5 SUPPLY, SUPERVISION,
AVENUE- INDUST. AREA COMMISSIONING, TEST AND
TRNG
DIPLOMAT TOWER DIPLOMAT TOWER ALMOAYYED A/C ALMOAYYED A/C C1400D5 SUPPLY, SUPERVISION,
TRNG
10 | P a g e

CONTRACTOR MODEL
NDIA NDIA MIDMAC- YUCKSEL JV MIDMAC- YUCKSEL JV C440D5 & C330D5 SUPPLY, SUPERVISION,
TRNG
PORSCHE WORK SHOP AL BORAQ AL BORAQ AL BORAQ AUTOMOBILES C440D5 ENCLOSED SUPPLY, SUPERVISION,
AUTOMOBILES TYPE COMMISSIONING, TEST AND
TRNG
SH. KHALID SUHAIM SH. KHALID SUHAIM AL EID TRADING AL EID TRADING C550D5 ENCLOSED SUPPLY, SUPERVISION,
ALTHANI RESIDENCE ALTHANI RESIDENCE TYPE & ATS COMMISSIONING, TEST AND
TRNG
CERIMONIAL COURT- QATAR QATAR MAN ENTERPRISE MAN ENTERPRISE C550D5 SUPPLY, SUPERVISION,
FOUNDATION FOUNDATION COMMISSIONING, TEST AND
TRNG
PEARL QATAR- UDC OFFICES UDC SUWAIDI ENGG. SUWAIDI ENGG. CONST. 2XC350D5 SILENT SUPPLY, SUPERVISION,
CONST. & ATS COMMISSIONING, TEST AND
TRAIN
QIPCO TOWER QIPCO TOWER MIDMAC – SIX MIDMAC – SIX CONSTR. 3X C1400D5 SUPPLY, SUPERVISION,
CONSTR. JV JV COMMISSIONING, TEST AND
TRAIN
QATAR FOUNDATION- CMU QATAR CCIC – TEYSER JV CCIC – TEYSER JV 2X C1400D5& SUPPLY, SUPERVISION,
FOUNDATION C700D5 COMMISSIONING, TEST AND
TRAIN
AL ZAABI RESIDENTIAL AL ZAABI COMMODORE QATAR COMMODORE QATAR C550D5 SUPPLY, SUPERVISION,
TOWER COMMISSIONING, TEST AND
TRNG
PEARL QATAR PEARL QATAR QATAR TECHNICAL QATAR TECHNICAL 2XC1400D5 SUPPLY, SUPERVISION,
SUPPORT SUPPORT COMMISSIONING, TEST AND
TRAIN
QASSAR TOWER QASSAR TOWER GULF ENGINEERING GULF ENGINEERING C1675D5A SUPPLY, SUPERVISION,
TRAIN
MINISTRY OF FINANCE MINISTRY OF RAMCO CONTACTING RAMCO CONTACTING C550D5 SUPPLY, SUPERVISION,
FINANCE COMMISSIONING, TEST AND
TRAIN
QATAR AIRWAYS TOWER QATAR AIRWAYS QATAR AIRWAYS QATAR AIRWAYS C550D5 SILENT & SUPPLY, SUPERVISION,
ATS COMMISSIONING, TEST AND
TRAIN
EMERGENCY MEDICAL HAMAD MEDICAL AL KHOLAIFI ENGG. AL KHOLAIFI ENGG. C350D5 SUPPLY, SUPERVISION,
CENTER ALKHOR CORP COMMISSIONING, TEST AND
TRAIN
QATAR NAVIGATION TOWER QATAR COMPUTER SUPPORT COMPUTER SUPPORT C700D5 SUPPLY, SUPERVISION,
NAVIGATION CO. CO. COMMISSIONING, TEST AND
TRAIN
DOHA AIR PORT DIA HOW UNITED HOW UNITED C1100D5 REMOTE SUPPLY, SUPERVISION,
RAD. COMMISSIONING, TEST AND
TRAIN
Al RAYYAN TOWER Al RAYYAN TOWER SAMKO INTER. SAMKO INTER. C1100D5 REMOTE SUPPLY, SUPERVISION,
RAD. COMMISSIONING, TESTING &
TRNG.
QATAR FOUNDATION, QATAR TRAGS ELECTRICAL TRAGS ELECTRICAL ENGG. 2X C1100D5 SUPPLY, SUPERVISION,
CENTRAL PLANT FOUNDATION ENGG. COMMISSIONING, TESTING
AND TRAINING
QATAR PETROLEUM – RLC QATAR PETROLEUM VOLTAGE VOLTAGE ENGINEERING C1400D5 SUPPLY, SUPERVISION,
ENGINEERING CO. CO. CONTAINRIZD COMMISSIONING, TESTING
MC130PLTS AND TRAINING
QATAR FOUNDATION, QATAR MERCURY MERCURY ENGINEERING C440D5 C330D5 SUPPLY, SUPERVISION,
SCIENCE AND TECHNOLOGY FOUNDATION ENGINEERING CO. CO. C700D5 C825D5 COMMISSIONING, TESTING
PARK AND TRAINING
11 | P a g e

CONTRACTOR MODEL
DIESEL WORKSHOP SECTION DIESEL WORKSHOP QATAR ELECTRICAL QATAR ELECTRICAL AND 6XC1675D5A SUPPLY, SUPERVISION,
SECTION AND WATER CO. WATER CO. (KAHRAMA) CONTAINRIZD COMMISSIONING, TESTING
(KAHRAMA) TRAILER AND TRAINING
LUSAIL TOWER LUSAIL MAN ENTERPRISE MAN ENTERPRISE C1100D5 SUPPLY, SUPERVISION,
DEVELOPMENT CONTAINRIZD COMMISSIONING, TESTING
AND TRAINING
PRIVATE BEACH VILLA PRIVATE BEACH MAPCO MAPCO C1675D5A SUPPLY, SUPERVISION,
VILLA COMMISSIONING, TESTING
AND TRAINING
Al ASMAKH TOWER Al ASMAKH SAMKO INTER. SAMKO INTER. 2XC900D5 SUPPLY, SUPERVISION,
COMMISSIONING, TESTING
AND TRAINING
KHALIFA INT’L TENNES KHALIFA INT’L PIONEER PIONEER CONTRACTING 2X C550D5 SUPPLY, SUPERVISION,
&SQUASH COMPLEX TENNES &SQUASH CONTRACTING & & TRADING CO. COMMISSIONING, TESTING
COMPLEX TRADING CO. AND TRAINING
RAS LAFFAN QATAR PETROLEUM SAM HYOUP SAM HYOUP INDUSTRIES C550D5 SILENT SUPPLY, SUPERVISION,
INDUSTRIES CO. CO. QTY2 COMMISSIONING, TESTING
AND TRAINING
NEW DOHA INT’L AIRPORT NDIA SINOHYDRO- GAMUDA SINOHYDRO- GAMUDA C550D5 SILENT SUPPLY, SUPERVISION,
JOINT VENTURE JOINT VENTURE QTY 14 COMMISSIONING, TESTING
AND TRAINING,
NATIONAL COMMAND INTERNAL SECURITY AL HUDA WORKS AL HUDA WORKS C1675D5A. QTY 3 SUPPLY, SUPERVISION,
CENTER FORCE ENGINEERING ENGINEERING + DMC 200 COMMISSIONING, TESTING
AND TRAINING
QATAR FOUNDATION QATAR M.A.N. ENTERPRISE M.A.N. ENTERPRISE C550D5 SILENT SUPPLY, SUPERVISION,
CEREMONIAL COURT FOUNDATION COMMISSIONING, TESTING
AND TRAINING
AL SHARQ HOTEL AL SHARQ HOTEL POWER LINE POWER LINE C1675D5A SUPPLY, SUPERVISION,
ENGINEERING ENGINEERING COMMISSIONING, TESTING
AND TRAINING
AL SHARQ HOTEL AL SHARQ HOTEL POWER LINE POWER LINE C1100D5 SUPPLY, SUPERVISION,
ENGINEERING ENGINEERING COMMISSIONING, TESTING
AND TRAINING
UPGRADIN WORKS AT DOHA UPGRADIN WORKS HOW UNITED HOW UNITED SERVICES C1100D5 SUPPLY, SUPERVISION,
INT’L AIRPORT AT DOHA INT’L SERVICES COMMISSIONING, TESTING
AIRPORT AND TRAINING
DOHA WOMEN’S CLUB DOHA WOMEN’S AL SHIEBAH ELECTRO- AL SHIEBAH ELECTRO- C1100D5 SUPPLY, SUPERVISION,
CLUB MECHANICAL MECHANICAL COMMISSIONING, TESTING
CONTRACTING CONTRACTING AND TRAINING
BEVERLY HILLS TOWER BEVERLY HILLS SAMKO INTER. SAMKO INTER. C1100D5 SUPPLY, SUPERVISION,
TOWER COMMISSIONING, TESTING
AND TRAINING
QATAR COMMERCIAL BANK CBQ TRAGS ELECTRICAL TRAGS ELECTRICAL C700D5 SUPPLY, SUPERVISION,
AND TRAINING
QATAR COMMERCIAL BANK CBQ TRAGS ELECTRICAL TRAGS ELECTRICAL C1400D5 SUPPLY, SUPERVISION,
AND TRAINING
CQ-AE-SS-15-Q4
12 | P a g e
3. Certificates
<Bar Code>
2020/12/02
ab $ bc $
!

'($#)$$)(% ! "#$%& !
'('$)$')($ ! 123 -./0 * +,
9'":; * 0 8 45./ 673
/

> ? @A BC ? / <7=/ / +
! <7=/ / .G ':""$"(9$(% DEF

"# K J H7/ I.!
$ N7 ) J LM H7/ 673
DC S 0 8 KO R + --O P Q $% K./
! 673 T 5 J 65
P Q ) N CV
--O
U7.O I ##& 65
!"
W5. + W5. W5. + W5.

XV 2M DO/ YQ 9#$($( XV 2M D7/ @A ##$%($$
D7/ \ H YQ S 9:(%(( BXV 2M D7/ YQ S 9%9'((
BXV 2M XV 2M 7 DO %;;#('9
]75 D7- YQ S 9:(:$( 2OZ7 2CK3
CX D '(($#&( Q D >Q 9#$"$(
HZ7 ^+7/ 2 DN7 L0 %#'$((' -2G HZ7 DN7 YQ 9:'(%(
1V 2M >XV 2M M
D0 / \ H YQ 9:#%$( M /[3 HZ7 /[3 YQ 9:'(%9
XV 2M
D0 / D_`/ %;;#":$ B D0 / YQ S 9%&'((
BZ7 D/! <- D.0 YQ S 9:('((
D.V7 D0 / @A ##$'&(' <- D.0 @A ##$$(&;
BXV 2M D7/ D '((#%"$

4. Technical offer
7(&+1,&$/2))(5
No Model Description Qty
01 Cummins Manufactured by Cummins Power Generation 02

Diesel Prime Output of 1500 KVA (1200 KW)
Generator set- Voltage output of 415/240Volts 3PH, 4Wire
C1675D5A Frequency output of 50 Hz at 1500 rpm
Open type Cummins Engine KTA50GS8, 16 Cylinder, V type,
water cooled, turbocharged.
Cummins- Stamford Alternator, brushless type, 4
Pole, Class H insulation with Class H temperature
rise
Included items :
x Power Command Control panel PCC3.3
x Digital AVR
x Electronic governor
x Base frame with integral anti-vibration mountings
and lifting points. The genset is painted in Munsell
Jade Green and has standard safety labels
attached.
x Set-PRXQWHGUDGLDWRUVXLWDEOHIRUÛ&
x Engine coolant heater
x Alternator heater
x Emergency stop buttons.
x Residential grade Silencer
x Spring type vibration isolator
x Network Communication board Modbus RTU
RS485
x One set of operation & maintenance manuals for
generator & control panel
x One set of drawings for generator & control panel
x Commissioning and Training
x Spare parts for 2 Years standby operation
02 ACB Free standing ACB panel 2500A ,4P– Fixed, 02
Manual
03 Day tank Free standing fuel day tank, Single wall 2500 Lit 02
suitable for 8 hours
04 NiCad NiCad battery for engine starting for C1675D5A 02
5 Years
05 5 Years/ 2500Hours warranty for standby application 02
Warranty
400 Days maintenance contract
Includes:
06 400 Days 02
11 Visit for inspection
1 Visit for service
&XPPLQV'LJLWDO0DVWHU&RQWUROOHU±'0&
0 '0& /RDGGHPDQGFRQWUROOHU 0
/RDGDGGVKHGFRQWUROV
´WRXFKVFUHHQ
0 FAT Factory Witness test in UK factory on the C1675D5A
Open type genset, before enclosure works
Includes: 4 Hour testing at 0.8 p.f, Safety shutdown, 01
Strip chart recording,
0 SAT Testing at site using Resistive (1pf) load bank for 02

hours per genset
Includes: rental & transportation of load bank to site,
cabling ( Max. distance 45m) ,site engineer. Maximum
rental period 4 days.
5. *HQHUDWRU6L]H&DOFXODWLRQ
^Ͳ'W>ŽĂĚ^ƵŵŵĂƌǇ
йůŽĂĚŽĨ
dKd> dKd> 'W
&ƌŽŵ dŽ ŝƌŽŶĚŝƚŝŽŶ tĂƚĞƌ,ĞĂƚĞƌ ŽŽŬĞƌ 'E>K Kd,Z^ KEEd DE ĐŽŶŶĞĐƚĞĚ
>K;ŬsͿ >K;ŬsͿ ůĂŽĚ
ŽŶŶĞĐƚĞĚ ĞŵĂŶĚ ŽŶŶĞĐƚĞĚ ĞŵĂŶĚ ŽŶŶĞĐƚĞĚ ĞŵĂŶĚ ŽŶŶĞĐƚĞĚ ĞŵĂŶĚ ŽŶŶĞĐƚĞĚ ĞŵĂŶĚ ŽŶŶĞĐƚĞĚ ĞŵĂŶĚ
>ŽĂĚĞƐĐƌŝƉƚŝŽŶ
>ŽĂĚ;ŬsͿ >ŽĂĚ;ŬsͿ >ŽĂĚ;ŬsͿ >ŽĂĚ;ŬsͿ >ŽĂĚ;ŬsͿ >ŽĂĚ;ŬsͿ >ŽĂĚ;ŬsͿ >ŽĂĚ;ŬsͿ >ŽĂĚ;ŬsͿ >ŽĂĚ;ŬsͿ >ŽĂĚ;ŬsͿ >ŽĂĚ;ŬsͿ
^ͲDϭ ϵϴ͘ϬϬ ϴϴ͘ϮϬ Ϯϵϲ͘ϵϯ ϭϳϴ͘ϭϱ Ϯϭϯ͘ϴϱ ϭϬϲ͘ϵϯ ϲϬϴ͘ϳϴ ϯϳϯ͘Ϯϴ ϰϯй
^Ͳ'W ^ͲDϮ ϭϬϴ͘ϬϬ ϵϳ͘ϮϬ Ϯϲϯ͘ϭϴ ϭϱϳ͘ϵϭ ϭϲϯ͘ϴϬ ϴϭ͘ϵϬ ϱϯϰ͘ϵϴ ϯϯϳ͘Ϭϭ ϯϴй
^ͲDϯ ϮϴϬ͘ϴϵ ϭϲϴ͘ϱϯ ϮϴϬ͘ϴϵ ϭϲϴ͘ϱϯ ϮϬй
^Ͳ'WdKd> ϮϬϲ͘ϬϬ ϭϴϱ͘ϰϬ ϴϰϭ͘ϬϬ ϱϬϰ͘ϱϵ ϯϳϳ͘ϲϱ ϭϴϴ͘ϴϯ ϭϰϮϰ͘ϲϱ ϴϳϴ͘ϴϮ
ĞŵĂŶĚĨĂĐƚŽƌ Ϭ͘ϵϬ Ϭ͘ϯϬ Ϭ͘ϰϬ Ϭ͘ϲϬ Ϭ͘ϱϬ Ϭ͘ϲ

D>;ŬsͿ ϭϴϱ͘ϰϬ ϱϬϰ͘ϲϬ ϭϴϴ͘ϴϯ ϴϳϴ͘ϴϮ
1. Genset detail Calculation is based on total connected load of 1424.65 kVA.

2. Calculation is performed by Cummins design software for Genset Sizing (Cummins PowerSuite).
3. For 100% connected load the Genset Model selected is C1675 D5A.
4. Each Genset rated prime output is 1500 kVA..
^ͲDϭ>ŽĂĚ^ƵŵŵĂƌǇ
dKd> dKd>
&ƌŽŵ dŽ ŝƌŽŶĚŝƚŝŽŶ tĂƚĞƌ,ĞĂƚĞƌ ŽŽŬĞƌ 'E>K Kd,Z^ KEEd DE
>K;ŬsͿ >K;ŬsͿ
^ϬϬϬϭ ϰϴ͘ϵϱ Ϯϵ͘ϯϳ ϰϴ͘ϵϱ Ϯϵ͘ϯϳ
^ϬϭϬϭ ϲϬ͘ϱϵ ϯϲ͘ϯϱ ϲϬ͘ϱϵ ϯϲ͘ϯϱ
^ϬϮϬϭ ϱϱ͘ϰϬ ϯϯ͘Ϯϰ ϱϱ͘ϰϬ ϯϯ͘Ϯϰ
^ϬϯϬϭ ϱϲ͘ϵϬ ϯϰ͘ϭϰ ϱϲ͘ϵϬ ϯϰ͘ϭϰ
^ͲDϭ ^Ϭϯ>Ϭϭ ϭϮϮ͘ϴϱ ϲϭ͘ϰϯ ϭϮϮ͘ϴϱ ϲϭ͘ϰϯ
^ϬϰϬϭ ϭϱ͘Ϭϵ ϵ͘Ϭϱ ϭϱ͘Ϭϵ ϵ͘Ϭϱ
^ϬϰϬϮ ϵϴ͘ϬϬ ϴϴ͘ϮϬ ϵϴ͘ϬϬ ϴϴ͘ϮϬ
^Ϭϰ>Ϭϭ ϵϭ͘ϬϬ ϰϱ͘ϱϬ ϵϭ͘ϬϬ ϰϱ͘ϱϬ
hW^Ͳϭ ϲϬ͘ϬϬ ϯϲ͘ϬϬ ϲϬ͘ϬϬ ϯϲ͘ϬϬ
^ͲDϭdKd> ϵϴ͘ϬϬ ϴϴ͘ϮϬ Ϯϵϲ͘ϵϯ ϭϳϴ͘ϭϱ Ϯϭϯ͘ϴϱ ϭϬϲ͘ϵϯ ϲϬϴ͘ϳϴ ϯϳϯ͘Ϯϴ
ĞŵĂŶĚĨĂĐƚŽƌ Ϭ͘ϵϬ ϭ͘ϬϬ Ϭ͘ϯϬ Ϭ͘ϯϬ Ϭ͘ϰϬ Ϭ͘ϰϬ Ϭ͘ϲϬ ϭ͘ϬϬ Ϭ͘ϱϬ ϭ͘ϬϬ
D>;ŬsͿ ϴϴ͘ϮϬ ϴϴ͘ϮϬ ϭϳϴ͘ϭϲ ϭϳϴ͘ϭϱ ϭϬϲ͘ϵϯ ϭϬϲ͘ϵϯ
^ͲDϮ>ŽĂĚ^ƵŵŵĂƌǇ
dKd> dKd>
>K;ŬsͿ >K;ŬsͿ
^ϬϬϬϭ ϰϮ͘ϴϰ Ϯϱ͘ϳϬ ϰϮ͘ϴϰ Ϯϱ͘ϳϬ
^ϬϭϬϭ ϰϱ͘ϴϬ Ϯϳ͘ϰϴ ϰϱ͘ϴϬ Ϯϳ͘ϰϴ
^ϬϮϬϭ ϰϵ͘ϳϱ Ϯϵ͘ϴϱ ϰϵ͘ϳϱ Ϯϵ͘ϴϱ
^ϬϯϬϭ ϱϬ͘ϭϭ ϯϬ͘Ϭϳ ϱϬ͘ϭϭ ϯϬ͘Ϭϳ
^ϬϰϬϭ ϭϰ͘ϲϴ ϴ͘ϴϭ ϭϰ͘ϲϴ ϴ͘ϴϭ
^ͲDϮ ^ϬϮ>Ϭϭ ϴϭ͘ϵϬ ϰϬ͘ϵϱ ϴϭ͘ϵϬ ϰϬ͘ϵϱ
^ϬϰϬϮ ϭϬϴ͘ϬϬ ϵϳ͘ϮϬ ϭϬϴ͘ϬϬ ϵϳ͘ϮϬ
^Ϭϰ>Ϭϭ ϴϭ͘ϵϬ ϰϬ͘ϵϱ ϴϭ͘ϵϬ ϰϬ͘ϵϱ
hW^ͲϮ ϲϬ͘ϬϬ ϯϲ͘ϬϬ ϲϬ͘ϬϬ ϯϲ͘ϬϬ
^ͲDϮdKd> ϭϬϴ͘ϬϬ ϵϳ͘ϮϬ Ϯϲϯ͘ϭϴ ϭϱϳ͘ϵϭ ϭϲϯ͘ϴϬ ϴϭ͘ϵϬ ϱϯϰ͘ϵϴ ϯϯϳ͘Ϭϭ
D>;ŬsͿ ϵϳ͘ϮϬ ϵϳ͘ϮϬ ϭϱϳ͘ϵϭ ϭϱϳ͘ϵϭ ϴϭ͘ϵϬ ϴϭ͘ϵϬ
^ͲDϯ>ŽĂĚ^ƵŵŵĂƌǇ
dKd> dKd>
>K;ŬsͿ >K;ŬsͿ
^ϬϰϬϯ ϲϯ͘ϬϬ ϯϳ͘ϴϬ ϲϯ͘ϬϬ ϯϳ͘ϴϬ
^ϬϰϬϯ ϲϲ͘ϬϬ ϯϵ͘ϲϬ ϲϲ͘ϬϬ ϯϵ͘ϲϬ
^ͲDϯ
>ϬϳϬϭ ϵϭ͘ϴϵ ϱϱ͘ϭϯ ϵϭ͘ϴϵ ϱϱ͘ϭϯ
hW^Ͳϯ ϲϬ͘ϬϬ ϯϲ͘ϬϬ ϲϬ͘ϬϬ ϯϲ͘ϬϬ
^ͲDϯdKd> ϮϴϬ͘ϴϵ ϭϲϴ͘ϱϯ ϮϴϬ͘ϴϵ ϭϲϴ͘ϱϯ
D>;ŬsͿ ϭϲϴ͘ϱϯ ϭϲϴ͘ϱϯ
RRRRRRRRRRRRGenerator
Recommended RRRRRRRRRRReport
RRRRRRR-RRC1675
R1RRRRD5A
RRR
RRR
R
RRRRRRRRR
RRRRRRR
RRRRRRRRRRR
Project Requirements
Frequency, Hz : R0R0 Generators Running in Parallel : 2

Duty : RRRRRRR Site Altitude, ft(m) : RR1R1R2R
Voltage : 2R0/R1RRRRRRR
RRRR RR Site Temperature, °C : R0
Phase : R Max. Altr Temp Rise, °C : 12R
Fuel : RR
RRRR Project Voltage Distortion Limit, % :
Emissions : RRRRRRRRRRRRR
Calculated Individual Generator Set Load Running and Peak Requirements
Running kW : 590.5 Max. Step kW : 559.8 In Step 1 Cumulative Step kW : 559.8

Running kVA : 722.5 Max. Step kVA : 858.9 In Step 1 Cumulative Step kVA : 858.9
Running PF : 0.82 Peak kW : None Cumulative Peak kW : None
Running NLL kVA : 0.0 Peak kVA : None Cumulative Peak kVA : None
Alternator kW : 590.46 Pct Rated Capacity : 44.0
Total System Running Load and Step Load Requirements
Running kW : 1181.0 Max. Step kW : 1119.6 Running NLL kVA : 0.0
Running kVA : 1445.0 Max. Step kVA : 1717.8
Generator Set Configuration
Alternator : P734D Engine : KTA50-GS8

BCode : B667 Fuel : Diesel
Excitation : PMG Displacement, cu in. (Litre) : 3067.0(50.3)
Voltage Range : 380-440 Cylinders : 16
Number of Leads : 6 Altitude Knee, ft(m) : 2953(900)
Reconnectable : Yes Altitude Slope, % per 1000ft(304.8m) : 5
Full Single Phase Output : No Temperature Knee, °F(°C) : 104(40)
Increased Motor Starting : No Temperature Slope, % per 18°F(10.0°C) : 12
Extended Stack : No Emissions : Non-Certified
Cooling Package : High Ambient
Set Performance Load Requirements
Running At : 44.0% Rated Capacity

Max. Step Voltage Dip, % : 11 Max. Allowed Step Voltage Dip : 20 In Step 1
Max. Step Frequency Dip, % : 3 Max. Allowed Step Frequency Dip : 10 In Step 1
Peak Voltage Dip, % : Peak Voltage Dip Limit % : 20.0
Peak Frequency Dip, % : Peak Frequency Dip Limit % : 10
Site Rated Standby kW/kVA : 1340 / 1675 Running kW : 590.5
Running kVA : 722.5
Site Rated Max. SkW : 1376 Effective Step kW : 559.8
Max. SkVA : 3960 Effective Step kVA : 858.9
Temp Rise at Full Load, °C : 150 Percent Non-Linear Load : 0.0
Voltage Distortion : Voltage Distortion Limit :
Site Rated Max Step kW Limit : Max Step kW :
*Note: Higher temperature rise at full rated load.
*Note: All generator set power derates are based on open generator sets.
RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR01RRRRR2021RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR 1
Loads Summary Report
ProR
ect - Shinbo HMC
Comments -
Pro*ect Requirements
Frequency, ** : 50.0 Generators Running in Parallel : 2

Duty : Standby Site Altitude, ft(m) : 361(152)
Voltage : 240/416RSeries R ye Site Temperature, °C : 40
Phase : 3 Max. Altr Temp Rise, °C : 125

Fuel : Diesel Pro*ect Voltage Distortion Limit, % :
Emissions : No Preference
Loads Summary List

*Note: Detailed Loads and Step Report available below
Running Starting PeaR Dip LimitsR% RTHD%

Step No. Load Name Ruantity
RR RRA RR RRA RR RRA Rdip Rdip Limit
Step01 AC Load - S-RMDB1 1 98.0 107.69 68.83 237.34 None None 20.0 10.0 0.0
Step01 General loads S- 1 237.54 296.93 237.54 296.93 None None 20.0 10.0 0.0
RMDB1
Step01 Rther loads S-RMDB1 1 171.08 213.85 171.08 213.85 None None 20.0 10.0 0.0
Step01 AC Load - S-RMDB2 1 108.0 118.68 75.91 261.76 None None 20.0 10.0 0.0
Step01 Gen load -- S-RMDB2 1 210.54 263.18 210.54 263.18 None None 20.0 10.0 0.0
Step01 Rthers- S-RMDB2 1 131.04 163.8 131.04 163.8 None None 20.0 10.0 0.0
Step01 GRN LRAD - S- 1 224.71 280.89 224.71 280.89 None None 20.0 10.0 0.0
RMDB3
Step Summary 590.0 723.0 560.0 859.0 None None 20.0 10.0 0.0
Running MaRStarting CumulatiRe Step CumulatiRe PeaR ProRect

RTHD%
ProR
ect Summary
RR RRA RR RRA RR RRA RR RRA Limit
590.5 722.5 559.8 858.9 559.8 858.9 0.0 0.0 0.0
*Note: Detailed Loads and Step Report available below
Loads and Steps Detail Report 01-Apr-2021 Page 1

Loads and Steps Detail Report
ProR
ect - Shinbo HMC
Comments -




Running NLL kVA : None Peak kVA : None Cumulative Peak kVA : None
Alternator kW : 590.46
Step1
Calculated IndiRidual Generator Set Step Load Requirements
Running kW : 590.0 Starting kW : 560.0 Cumulative Step kW : 560.0

Running kVA : 723.0 Starting kVA : 859.0 Cumulative Step kVA : 859.0
Running Amps : 2008.0 Starting Non-linear kVA : 0.0

Running Non-linear kVA : 0.0
Voltage Distortion Limit for : 0
step
AC Load - S-EMDB1 Three Phase Ruantity : 1 In this Step
Category : AC
Running kW : 98.0 Starting kW : 68.83 Peak kW : None

Running kVA : 107.69 Starting kVA : 237.34 Peak kVA : None
Running PF : 0.91 Starting PF : 0.29 Cyclic : No

Running Amps : 149.64 Max. % Voltage Dip : 20.0 Max. % Frequency Dip : 10.0
Alternator kW : 98.0 Voltage : 416
AC Tons : 98.0 Method : R ye-Delta

kW Per Ton : 1.0 LRkVA Factor : 5.9
Design : Standard NRMA Design BRC or D LRkVA Code : G
General loads S-EMDB1 Three Phase Ruantity : 1 In this Step

Category : Rser Defined


Other loads S-EMDB1 Three Phase Ruantity : 1 In this Step


AC Load - S-EMDB* Three Phase Ruantity : 1 In this Step

Category : AC

AC Tons : 108.0 Method : R ye-Delta
kW Per Ton : 1.0 LRkVA Factor : 5.9

Design : Standard NRMA Design BRC or D LRkVA Code : G
Gen load -- S-EMDB* Three Phase Ruantity : 1 In this Step

Others- S-EMDB* Three Phase Ruantity : 1 In this Step


GEN LOAD - S-EMDB3 Three Phase Ruantity : 1 In this Step




Steps and Dips Details Report
ProR
ect - Shinbo HMC


Running NLL kVA : 0.0 Peak kVA : None Cumulative Peak kVA : None
Generator Set Configuration
Model : C1675 D5A Alternator : P734D

Engine Model : KTA50-GS8 Excitation : PMG
Fuel : Diesel High Ambient
Step Level Dips Summary

Step * Voltage Dip Expected Voltage Frequency Expected Frequency
Limit (%) Step Voltage Recovery Time Dip Limit Frequency recovery
Dip (%) (s) ** (%) Dip (%) Time (s) **
1 20 11 * 10 3 *
Note: Please refer to the model Spec. sheet for bandwidths used to report recoRery times. Ror products manufactured in the Rnited
Kingdom it may be assumed that recoRery times are based on ISR8528-5 G2 class bandwidths. Roltage and frequency recoRery times
are estimates. TypicallyRallow fiRe to ten seconds between application of load steps when designing your system.
**Please note that in some cases the Roltage and frequency recoRery time estimates are not shown in list. This is a result of RdummyR
data points temporarily being used to fill data gaps in the GenSiRe database. Please disregard these blanRresults.
*Note: Contact your Cummins Power Generation Distributor for Recovery Data
Steps and Dips Detail Report 01-Apr-2021 Page 1

Value
0 1 * 3 4 * * * 8 * 10 11 1* 13 14 1* 1* 1* 18 1* *0 *1
Step *
Step 1 11.0 *0 . 0
VDip Actual VDip Limit
Value
0 1 * 3 4 * * * 8 * 10
Step *
Step 1 3.0 10.0
FDip Actual FDip Limit
Steps and Dips Detail Report 01-Apr-2021 Page 2

Alternator ARailable Short Circuit Current Rstimator Detail Report
ProR
ect - Shinbo SNR
Comments -

Imported Generator Set Parameters
Genset Model : C1675 D5A Number Of Paralleled Gensets : 2.0
Genset Rating : 1340.0 Genset Line-Line Voltage : 416.0
Alternator Rating : 1650.0 Alternator **d : 0.12
Short Circuit Current Summary
Genset Rated Current : 2325 A Three Phase Short Circuit : 19.1 RA

Current(RMS)
Gen Bus Full Load Current : 4650 A Gen Bus Short Circuit Current (kA) : 38.2 RA
This tool is intended as a guidance for short circuit current calculations.It is not a guarantee of proper system operation and it is not intended to replace a qualified engineerR
sRudgment.
This calculator is based on alternator subtransient reactance. R hen in doubtRcontact your Cummins Distributor.
1. GCP main bus bar to be rated minimum 38.2 kA as per alternator maximum permissible short circuit current.
Alternator ARailable Short Circuit Current Rstimator Detail Report 30-Mar-2021 Page 1
De-rate Calculation
Project : SNF Facility for HMC
Model : C1675D5A Ambient temperature in °C : 50

Duty : Prime
Engine : KTA50GS8
Alternator : P7D
1. Engine De-rate Power
= {(Gross Engine Power x % De-rate)- Fan Power}x Alt. efficiency
= {( 1287 x 0.00% )- 30 }x 96.30%

kW kWm
= 1210.5 kW
2. Alternator De-rate Power
= Alternator rated power x Temp derate factor x Altitude de-rate factor
= 1320 x 0.94 x 1
kW
= 1240.8 kW
3. Net De-rated Output at 50 Deg.C
= 1210.5 kW
Enter the lowest among the 1 & 2 above^
Power factor = 0.8 pf
Output power = 1513 KVA Prime 50 °C
CQAE-SS_R0
Date : 28-Mar-2021
Generator set data sheet
Model: C1675 D5A

Frequency: 50 Hz
Fuel type: Diesel
Spec sheet: SS16-CPGK

Sound data sheet: MSP-2042
Standby Prime
Fuel consumption kVA (kW) kVA (kW)
Ratings 1675 (1340) 1500 (1200)
Load 1/4 1/2 3/4 Full 1/4 1/2 3/4 Full
US gph 24.3 43.7 66.8 91.2 23.3 44.1 62.8 81.6
L/hr 92 165 253 345 88 167 238 309
Engine Standby rating Prime rating

Engine manufacturer Cummins
Engine model KTA50 GS8
Configuration Cast iron, 60 º V16 cylinder
Aspiration Turbocharged and low temperature after-cooled
Gross engine power output, kWm 1429 1287
BMEP at set rated load, kPa 2275 2062
Bore, mm 159
Stroke, mm 159
Rated speed, rpm 1500
Piston speed, m/s 7.9
Compression ratio 14.9:1
Lube oil capacity, L 178
Overspeed limit, rpm 1725 ±50
Regenerative power, kW 116
Governor type Electronic
Starting voltage 24 Volts DC
Fuel flow
Maximum fuel flow, L/hr 570
Maximum fuel inlet restriction, mm Hg 203
Maximum fuel inlet temperature, °C 70
power.cummins.com
©2019 Cummins Inc. | DS47-CPGK (07/19)
PI734D
SPECIFICATIONS & OPTIONS
STANDARDS TERMINALS & TERMINAL BOX
Stamford industrial generators meet the requirements of BS Standard generators feature a main stator with 6 ends
EN 60034 and the relevant sections of other national and brought out to the terminals, which are mounted on the
international standards such as BS5000, VDE 0530, NEMA frame at the non-drive end of the generator. A sheet steel
MG1-32, IEC60034, CSA C22.2-100, AS1359. terminal box contains the AVR and provides ample space
Other standards and certifications can be considered on for the customers' wiring and gland arrangements. It has
request. removable panels for easy access.
DESCRIPTION SHAFT & KEYS

The STAMFORD PI range of synchronous ac generators are All generator rotors are dynamically balanced to better
brushless with a rotating field. They are separately excited than BS6861:Part 1 Grade 2.5 for minimum vibration in
by the STAMFORD Permanent Magnet Generator (PMG). operation. Two bearing generators are balanced with a
This is a shaft mounted, high frequency, pilot exciter which half key.
provides a constant supply of clean power via the Automatic
Voltage Regulator (AVR) to the main exciter. The main INSULATION/IMPREGNATION
exciter output is fed to the main rotor, through a full wave The insulation system is class 'H', and meets the
bridge rectifier, protected by surge suppression. requirements of UL1446.
All wound components are impregnated with materials
VOLTAGE REGULATORS APPROVED DOCUMENT and processes designed specifically to provide the high
The PI range generators, complete with a PMG, are available build required for static windings and the high mechanical
with one of two AVRs. Each AVR has soft start voltage build strength required for rotating components.
up and built in protection against sustained over-excitation,
which will de-excite the generator after a minimum of 8 QUALITY ASSURANCE
seconds. Generators are manufactured using production
Underspeed protection (UFRO) is also provided on both procedures having a quality assurance level to
AVRs. The UFRO will reduce the generator output voltage BS EN ISO 9001.
proportional to the speed of the generator below a pre-
settable level. NOTE ON REGULATION
The stated voltage regulation may not be maintained in
The MX341 AVR is two phase sensed with a voltage the presence of certain radio transmitted signals. Any
regulation of ± 1 %. (see the note on regulation). change in performance will fall within the limits of Criteria
'B' of EN 61000-6-2:2001. At no time will the steady-state
The MX321 AVR is 3 phase rms sensed with a voltage voltage regulation exceed 2%.
regulation of 0.5% rms (see the note on regulation). The
UFRO circuit has adjustable slope and dwell for controlled DE RATES
recovery from step loads. An over voltage protection circuit All values tabulated on page 8 are subject to the following
will shutdown the output device of the AVR, it can also trip an reductions
optional excitation circuit breaker if required. As an option,
short circuit current limiting is available with the addition of 5% when air inlet filters are fitted.
current transformers. 10% when IP44 Filters are fitted.
3% for every 500 metres by which the operating altitude
Both the MX341 and the MX321 need a generator mounted exceeds 1000 metres above mean sea level.
current transformer to provide quadrature droop 3% for every 5°C by which the operational ambient
characteristics for load sharing during parallel operation. temperature exceeds 40°C.
Provision is also made for the connection of the STAMFORD
power factor controller, for embedded applications, and a Note: Requirement for operating in an ambient
remote voltage trimmer. temperature exceeding 60°C must be referred to the
factory.
WINDINGS & ELECTRICAL PERFORMANCE
All generator stators are wound to 2/3 pitch. This eliminates
triplen (3rd, 9th, 15th …) harmonics on the voltage waveform
and is found to be the optimum design for trouble-free supply
of non-linear loads. The 2/3 pitch design avoids excessive
neutral currents sometimes seen with higher winding pitches. Note: Continuous development of our products entitles us to
A fully connected damper winding reduces oscillations during change specification details without notice, therefore they must
paralleling. This winding, with the 2/3 pitch and carefully not be regarded as binding.
selected pole and tooth designs, ensures very low levels of
voltage waveform distortion. Front cover drawing is typical of the product range.
2
PI734D
Winding 312 / 0.8 Power Factor
RATINGS
Class - Temp Rise Cont. F - 105/40°C Cont. H - 125/40°C Standby - 150/40°C Standby - 163/27°C
50Hz Star (V) 380 400 415 440 380 400 415 440 380 400 415 440 380 400 415 440
kVA 1500 1540 1540 1505 1615 1650 1650 1620 1675 1720 1720 1685 1715 1770 1770 1735
kW 1200 1232 1232 1204 1292 1320 1320 1296 1340 1376 1376 1348 1372 1416 1416 1388
Efficiency (%) 96.2 96.3 96.4 96.5 96.1 96.2 96.3 96.4 96.0 96.1 96.2 96.3 95.9 96.0 96.1 96.3
kW Input 1247 1279 1278 1248 1344 1372 1371 1344 1396 1432 1430 1400 1431 1475 1473 1441
60Hz Star (V) 416 440 460 480 416 440 460
APPROVED DOCUMENT 480 416 440 460 480 416 440 460 480
kVA 1690 1800 1840 1875 1815 1935 1975 2015 1890 2015 2055 2100 1940 2070 2115 2160
kW 1352 1440 1472 1500 1452 1548 1580 1612 1512 1612 1644 1680 1552 1656 1692 1728
Efficiency (%) 96.2 96.2 96.3 96.4 96.1 96.1 96.2 96.3 96.0 96.0 96.1 96.2 95.9 96.0 96.1 96.1
kW Input 1405 1497 1529 1556 1511 1611 1642 1674 1575 1679 1711 1746 1618 1725 1761 1798
DIMENSIONS
8
ϲ. 3URMHFW6SHFLILFDWLRQ Compliance statement

+DPDG0HGLFDO&LW\ 3DFNDJHG(QJLQH*HQHUDWRU6\VWHP
6(&7,21±3$&.$*('(1*,1(*(1(5$7256<67(06

3$57*(1(5$/

6&23(

$ 7KHZRUNRIWKLV6HFWLRQLVLQWHJUDOZLWKWKHZKROHRIWKH3URMHFW'RFXPHQWDWLRQDQGLVQRW
LQWHQGHGWREHLQWHUSUHWHGRXWVLGHWKDWFRQWH[W

% &RRUGLQDWHWKHZRUNZLWKDOORWKHUVHUYLFHVDIIHFWLQJWKHZRUNRIWKLV6HFWLRQ

& 5HODWHG6HFWLRQVDUHDVIROORZV

6HFWLRQ±(OHFWULFDO*HQHUDO3URYLVLRQV0DWHULDOV$QG0HWKRGV
6HFWLRQ±&DEOH7UD\V
6HFWLRQ±%XLOGLQJ:LUH$QG&DEOH9ROWV$QG%HORZ
6HFWLRQ±&RQGXLWV$QG&RQGXLW%R[HV
6HFWLRQ±6XSSRUWLQJ'HYLFHV7UXQNLQJ
6HFWLRQ±*URXQGLQJ
6HFWLRQ±6ZLWFKERDUGV

' 6KRUW&LUFXLW&DSDFLW\
)RU*HQHUDWRU&RQWURO3DQHOV³*&3´$XWRPDWLF7UDQVIHU6ZLWFKHV ³$76´DQG(PHUJHQF\
0DLQ'LVWULEXWLRQ³(0'%´(PHUJHQF\'LVWULEXWLRQ%RDUGVDQG3DQHO%RDUGV³('%DQG(3%´
WKHIDXOWFXUUHQWVKRZQRQWKHGUDZLQJVDUHPLQLPDODQGDUHEDVHGRQDFHUWDLQGHVLJQ
FULWHULD WKH &RQWUDFWRU VKDOO VXEPLW WKH UHOHYDQW FDOFXODWLRQV EDVHG RQ WKH VHOHFWHG DQG
DSSURYHGJHQHUDWRUVLQFDVHWKDWWKHFDOFXODWHGIDXOWFXUUHQWVDUHKLJKHUWKDQWKHGHVLJQ
ILJXUHV WKH &RQWUDFWRU VKDOO SURYLGH DOO FRQQHFWHG VZLWFKERDUGV DQG UHOHYDQW HTXLSPHQW
EDVHGRQWKHFDOFXODWHGILJXUHVZLWKRXWDQ\H[WUDFRVWWRWKHFOLHQW

( 7KH*HQHUDWRUVHWVDQGWKHHPHUJHQF\SRZHUVXSSO\V\VWHPVKDOOEHGHVLJQHGIRUq&
DPELHQWWHPSHUDWXUH

) 1RLVH/HYHOV

1RLVH/HYHO&ULWHULD7KHDYHUDJHQRLVHOHYHOVKDOOQRWH[FHHGWKHHVWDEOLVKHGYDOXHV
EHORZGXULQJWKHIXOORSHUDWLRQDWIXOOFDSDFLW\DWWKHVDPHWLPHRIDOOJHQHUDWRUVORFDWHG
DWWKHVDPHURRP

,QVLGHWKHURRPPD[QRLVHOHYHOLVG%1RLVHOHYHOLQVLGHWKHQHDUE\
URRPV RI WKH 61) +RVSLWDO VKDOO QRW H[FHHG WKH PD[ QRLVH OHYHO YDOXHV
HVWDEOLVKHGLQWKHPHFKDQLFDOVSHFLILFDWLRQVIRUWKHVHURRPVLQPRUHWKDQ
G% DQG DW RXWVLGH WKH JHQHUDWRU URRP DW PHWHUV GLVWDQFH VKDOO QRW
H[FHHGG%

1RLVH/HYHO&DOFXODWLRQVDQG6RXQG$WWHQXDWLRQ7KH&RQWUDFWRUWRFDUU\RXWWKHQRLVH
OHYHOFDOFXODWLRQVEDVHGRQWKHDSSURYHGJHQHUDWRUVHWV7KHFRQWUDFWRUWRSURYLGHDOO
PHDVXUHV DQG PDWHULDO ODERXUHWF ZLWKRXW DQ\ H[WUD FRVW WR UHDFK WKH HVWDEOLVKHG
QRLVH OHYHO FULWHULD LQFOXGLQJ LQWDNH DQG GLVFKDUJH DLU VRXQG DWWHQXDWRUV ZDOO DQG

3DJHRI

FHLOLQJ VRXQG LQVXODWLRQ H[KDXVW V\VWHP VLOHQFHUV DQG VRXQG LQVXODWLRQ IDFWRU\
VWDQGDUG VRXQG SURRI FDQRSLHV IRU JHQHUDWRU VHWV WDNLQJ LQWR FRQVLGHUDWLRQ WKH
GLPHQVLRQVDQGDOORWKHUUHTXLUHGWRGHOLYHUWKHHVWDEOLVKHGQRLVHOHYHOFULWHULD
&RRUGLQDWLRQ RI &LYLO $UFKLWHFWXUDO DQG RWKHU :RUNV UHODWHG WR JHQHUDWRU URRPV 7KH
&RQWUDFWRU KDYH WR FRRUGLQDWH DOO ZRUNV UHODWHG WR JHQHUDWRU URRPV WDNLQJ LQWR
FRQVLGHUDWLRQ WKH QRLVH OHYHO FDOFXODWLRQV DQG VRXQG DWWHQXDWLRQ PHDVXUHV DQG
DFFRUGLQJO\WKHJHQHUDWRUURRPOD\RXW
&RRUGLQDWLRQZLWKWKHUHTXLUHPHQWVRIPHFKDQLFDOVSHFLILFDWLRQVDOOPHDVXUHVWDNHQE\
WKH&RQWUDFWRUWRPHHWWKHQRLVHOHYHOVFULWHULDDUHWREHFRRUGLQDWHGDQGLQWHJUDWHG
ZLWKPHFKDQLFDOUHTXLUHPHQWVHFWLRQ

'(6&5,37,21

$ 7KH &RQWUDFWRU VKDOO VXSSO\ LQVWDOO FRPPLVVLRQ WHVW DQG KDQGRYHU LQ JRRG RSHUDEOH
PDQQHULQFOXGLQJGD\VJXDUDQWHHDQGPDLQWHQDQFHRI9PDLQVIDLOXUHFRQWLQXRXV
W\SHGLHVHOJHQHUDWRUVHWDQGVKRXOGJXDUDQWHHIRUHOHFWULF*HQHUDWRUIRU\HDUV7KHVHW
VKDOOEHDUUDQJHGIRUDXWRPDWLFVWDUWRQPDLQVIDLOXUH7KHVHWVKDOOEHFRPSOHWHZLWKGLHVHO
HQJLQHJHQHUDWRUFRQWUROSDQHOEDWWHULHVVWDUWLQJPRWRUEXLOWLQDLUFRROHGUDGLDWRUPDLQ
IXHOVWRUDJHWDQNGDLO\IXHOVWRUDJHWDQNIXHOWUDQVIHUSXPSVDQGDOORWKHUDFFHVVRULHVDV
VSHFLILHG

5()(5(1&(6

7KHIROORZLQJVWDQGDUGVDUHUHIHUUHGWRLQWKLV3DUW

%6(QJLQHV
%6$OWHUQDWRUV
$16,,(((5HFRPPHQGHG3UDFWLFHIRU(PHUJHQF\DQG6WDQGE\3RZHU6\VWHPVIRU
,QGXVWULDODQG&RPPHUFLDODSSOLFDWLRQV
1)3$6WDQGDUGIRU(PHUJHQF\DQG6WDQGE\3RZHU6\VWHPV

48$/,7<$6685$1&(

$ 0DQXIDFWXUHU
V4XDOLILFDWLRQ

WKHJHQHUDWRUVHWVKDOOEHWKHSURGXFWRIDVLQJOHPDQXIDFWXUHUUHJXODUO\HQJDJHG
DVDPDQXIDFWXUHURIVXFKHTXLSPHQW

% ,QVWDOOHU
V4XDOLILFDWLRQ

DOOWKH'LHVHO*HQHUDWRULQVWDOODWLRQZRUNVKDOOEHFDUULHGRXWE\D'LHVHO*HQHUDWRU
&RQWUDFWRU 'LHVHO *HQHUDWRU &RQWUDFWRU VKDOO EH RQH ZKR LV QRUPDOO\ DQ DJHQW
UHSUHVHQWLQJ RQH RU PRUH RI WKH DSSURYHG PDNHV RI '* VHWV 'LHVHO *HQHUDWRU
LQVWDOODWLRQVKDOOEHVXSHUYLVHGFKHFNHGDQGWHVWHGE\DTXDOLILHGUHSUHVHQWDWLYHRI
WKHPDQXIDFWXUHUDQGKDQGRYHUWKHZRUNVLQSHUIHFWUXQQLQJRUGHUWRWKHVDWLVIDFWLRQ
RIWKH(QJLQHHU

& 6RXUFH4XDOLW\&RQWURO

WHVWWKHFRPELQHGHQJLQHJHQHUDWRUVHWDWWKHIDFWRU\DQGVXEPLWWKHFHUWLILHGWHVW
UHSRUWDQGFHUWLILFDWHRIDOOWHVWVWRWKH(QJLQHHUIRUKLVDSSURYDO

3DJHRI

WHVW*HQHUDWRUVDQGHPHUJHQF\SRZHUVXSSO\DWVLWH

' /RFDO$JHQW

WKH PDQXIDFWXUHU VKRXOG KDYH DQ DJHQW LQ 4DWDU ZKR LV ZHOO H[SHULHQFHG LQ
LQVWDOODWLRQDQGPDLQWHQDQFHRIGLHVHOJHQHUDWRUVRIWKHVL]HVSHFLILHGKHUHLQ7KH
DJHQWVKRXOGKDYHEHHQDVVRFLDWHGZLWKWKHPDQXIDFWXUHUIRUDPLQLPXPSHULRGRI
ILYH\HDUV

( 'HVLJQ&ULWHULD

DOOPDWHULDOVDQGHTXLSPHQWVKDOOFRPSO\ZLWKUHOHYDQW,(&DQG%6VSHFLILFDWLRQV
DVUHJDUGVTXDOLW\RIPDWHULDOVSHUIRUPDQFHDQGSURYLQJWHVWV
WKHHPHUJHQF\SRZHUVXSSO\V\VWHPDQGLWVFRPSRQHQWVVKDOOEHVXFKDVPD\EH
SURSHUO\PDLQWDLQHGDQGVHUYLFHGZLWKRXWWKHQHFHVVLW\RIFDUU\LQJH[SHQVLYHVSDUH
SDUWVWRFNVRUEHLQJVXEMHFWHGWRLQWHUUXSWHGVHUYLFHGXHWRWKHODFNRIVSDUHSDUWV
HPHUJHQF\ JHQHUDWRU VHW VKDOO EH GHVLJQHG WR DOORZ HDV\ UHSODFHPHQW RI PDMRU
LWHPVVXEMHFWWRZHDU

) $WWHQGDQFHRIIDFWRU\WHVWLQJDQGLQVSHFWLRQ

7KH&RQWUDFWRUVKDOODUUDQJHIRUWKHFOLHQW¶VWHDPWRDWWHQGDQGZLWQHVVWKHIDFWRU\
WHVWLQJRIDOOWKH'LHVHO*HQHUDWRUWHVWLQDFFRUGDQFHZLWK6HFWLRQ

68%0,77$/6

$ 6KRS'UDZLQJV

VXEPLWVKRSGUDZLQJVIRUDSSURYDOLQDFFRUGDQFHWR6HFWLRQ
VKRSGUDZLQJVVKDOOEHFRPSOHWHDVWREHUHFRUGGUDZLQJVQRWJHQHUDORXWOLQH
GUDZLQJVXVHGIRUVDOHVDQGJXLGHOD\RXWV
VXEPLWDFRPSOHWHZLULQJGLDJUDPIRUWKHJHQHUDWRUVHWGUDZQRQDVLQJOH
VWDQGDUGVL]HVKHHWVKRZLQJWKHIROORZLQJ

L DOOFRPSRQHQWVRI

x HQJLQHVWDUWLQJFRQWURO
x HQJLQHDODUP
x JHQHUDWRUFRQWURO
x EDWWHU\
x EDWWHU\FKDUJHU
x HDUWKLQJ
x WUDQVIHUVZLWFKFRQWUROUHOD\V

LL LQWHULRUZLULQJWHUPLQDOVDQGLQWHUFRQQHFWLQJZLULQJ
LLL FHUWLILHGGLPHQVLRQVDQGZHLJKWV

VXEPLWDFRPSRVLWHZLULQJGLDJUDPRIWKHHQWLUHHPHUJHQF\WUDQVIHUV\VWHPVKRZLQJ
DOOZLULQJEHWZHHQWKHHQJLQHVWDUWLQJSDQHOHQJLQHJHQHUDWRUVHWDQGWKHDXWRPDWLF
WUDQVIHUVZLWFKHV
ZLULQJGLDJUDPVVKDOOFOHDUO\VKRZ

3DJHRI

L PDLQFXUUHQWFRQGXFWRUVLQKHDY\OLQHV
LL FRQWUROFRQGXFWRUVZLWKFRORUDQGRUQXPEHUFRGLQJ
LLL ORFDWLRQRIUHOD\VDQGDSSDUDWXV
LY GHVFULSWLRQRIIXQFWLRQW\SHDQGFDWDORJXHRIDOOFRPSRQHQWV

DOWHUQDWRU&RQWURO3DQHO

L VXEPLWDVFKHPDWLFOLQHGLDJUDPVKRZLQJ

ā ,QWHUORFNV
ā 3URWHFWLRQ
ā ,QVWUXPHQWV

VXEPLW JHQHUDO DUUDQJHPHQW GUDZLQJV RI WKH JHQHUDWRU LQVWDOODWLRQ DQG WKH
JHQHUDWRUEXLOGLQJOD\RXW

% 3URGXFW'DWDVXEPLWWHGLQDFFRUGDQFHWR6HFWLRQ

6XEPLWFXUYHVVKRZLQJWKHDFWXDOSHUIRUPDQFHRIDVLPLODUHQJLQHVDPHPRGHO
VWURNH HWF WR WKDW SURSRVHG VXSHULPSRVHG RQ WKH VWDQGDUG SXEOLVKHG
SHUIRUPDQFHFXUYHVIRUFRQWLQXRXVDQGPD[LPXPRSHUDWLRQ
6XEPLW WKH GHWDLOHG LQIRUPDWLRQ WRJHWKHU ZLWK PDQXIDFWXUHU
V FDWDORJXHV IRU WKH
IROORZLQJ

L JHQHUDWLQJVHWPDQXIDFWXUHU
LL QDPHDQG$GGUHVV
LLL JHQHUDWLQJVHW0RGHO1R
LY GLHVHO(QJLQH
Y UDGLDWRU
YL IXHO6\VWHP
YLL DOWHUQDWRU
YLLL H[FLWHU
L[ VWDUWLQJ%DWWHU\
[ FRQWURO3DQHO
[L VHUYLFH)DFLOLWLHV

7HVWUHSRUWDQGFHUWLILFDWHV
/LVWRIVWDQGDUGWRROV
/LVWRIVSDUHSDUWVPLQLPXPEXWQRWOLPLWHGWRDVIROORZV

L $LUILOWHUVHWVSHUJHQHUDWRUVHW
LL /XEULFDWLQJILOWHUVHWVSHUJHQHUDWRUVHW
LLL %\SDVVILOWHUVHWVSHUJHQHUDWRUVHW
LY )XHOILOWHUVHWVSHUJHQHUDWRUVHW

&HUWLILHGIDFWRU\WHVWUHSRUWV
,QVWUXFWLRQPDQXDOVIRURSHUDWLRQDQGPDLQWHQDQFH
3DUWVFDWDORJXHZLWKPDQXIDFWXUHUDGGUHVV
&DOFXODWLRQIRUWKHVKRUWFLUFXLWIDXOWRIWKH(PHUJHQF\3RZHU6XSSO\6\VWHP
EDVHGRQWKHVHOHFWHGDQGDSSURYHGHTXLSPHQWV
3HULRGRI0DLQWHQDQFHDQG*XDUDQWHH

3DJHRI

$ 'XULQJWKHPDLQWHQDQFHSHULRGRIGD\VWKH&RQWUDFWRUVKDOOUHSDLUDQGUHSODFHGLUHFWO\
DW KLV RZQ H[SHQVH DQ\ IDLOXUH PDOIXQFWLRQ RI WKH SODQW PDWHULDO RU ZRUN SHUIRUPHG RU
IXUQLVKHGXQGHUWKHUHVSHFWLYHZRUNVRIWKH&RQWUDFW7KHJXDUDQWHHSHULRGIRUDOOGLHVHO
JHQHUDWRUVHWVDQG(PHUJHQF\3RZHU6XSSO\6\VWHPVKDOOEH\HDUV

% 7KH &RQWUDFWRU VKDOO REWDLQ DQG VXEPLW WR WKH (QJLQHHU DOO JXDUDQWHHV RU FHUWLILFDWHV RU
ZDUUDQW\DYDLODEOHIURPWKHPDQXIDFWXUHUVEXWRQO\DVVXSSOHPHQWDU\WRWKH&RQWUDFWRU
V
RZQOLDELOLWLHVXQGHUWKH3URMHFWDQGLQQRZD\LQYDOLGDWHWKHP

& 7KH &RQWUDFWRU VKDOO EH UHVSRQVLEOH IRU WKH VDWLVIDFWRU\ RSHUDWLRQ RI WKH '* LQVWDOODWLRQ
GXULQJ WKH 0DLQWHQDQFH 3HULRG +H VKDOO FDUU\ RXW DOO QHFHVVDU\ LQVSHFWLRQ SUHYHQWLYH
PDLQWHQDQFH DQG WHVWLQJ WR NHHS WKH VHW UHDG\ DOO WKH WLPH 7KH VHW VKDOO IXQFWLRQ
VDWLVIDFWRULO\GXULQJSRZHUIDLOXUHV7KH&RQWUDFWRUVKDOOFDUU\RXWURXWLQHORDGWHVWLQJRIWKH
LQVWDOODWLRQRQFHLQHYHU\PRQWKWKURXJKRXWWKH0DLQWHQDQFH3HULRG7KHWHVWLQJVKDOOEH
FDUULHGRXWLQWKHSUHVHQFHRIWKH(QJLQHHU(QGXVHU7KH&RQWUDFWRUVKDOOKLPVHOISURYLGH
DOOHOHFWULFDODQGPHFKDQLFDOVSDUHSDUWVJUHDVHOXEULFDWLQJRLOVILOWHUVFRQVXPDEOHSDUWV
WRXFKXSSDLQWVHWFUHTXLUHGIRUWKHPDLQWHQDQFHRIWKH'*LQVWDOODWLRQ7KHRZQHUVKDOO
EH UHVSRQVLEOH RQO\ IRU SURYLGLQJ GLHVHO RLO DV DQG ZKHQ UHTXLUHG 7KH &RQWUDFWRU VKDOO
SUHSDUHORJERRNVOLVWHGIXOOGHWDLOVRIPDLQWHQDQFHZRUNDQGHDFKORJERRNHQWU\VKDOOEH
FRXQWHUVLJQHGE\WKH(QJLQHHU(QGXVHU

' *XDUDQWHH7KHJXDUDQWHHSHULRGIRUDOOGLHVHOJHQHUDWRUVHWVDQG(PHUJHQF\3RZHU6XSSO\
6\VWHPVKDOOEH\HDUVWKH*XDUDQWRUIRU*HQHUDWRUVHWVVKDOOEHWKHPDQXIDFWXUHUDQG
WKH&RQWUDFWRUIRUWKHRYHUDOO(PHUJHQF\3RZHU6XSSO\6\VWHPVKDOOEHWKH&RQWUDFWRU

3$57352'8&76

'LHVHO*HQHUDWRU6HW
*HQHUDO
6LQJOH6WHS/RDG3LFNXS&DSDFLW\

7KHJHQHUDWRUVHWVKDOOEHFDSDEOHRIVWDUWLQJDQGFDUU\LQJRXWWKHORDGZLWKRIWKH
VSHFLILHGSULPHSRZHUDVPLQLPXPVLQJOHVWHSORDGLQJDQGWKHYROWDJHGLSGXULQJWKDW
VKRXOGQRWH[FHHGRIWKHVSHFLILHGYROWDJHZLWKUHFRYHU\WLPHQRWH[FHHGLQJ
VHFRQGVIUHTXHQF\GLSVKRXOGQRWH[FHHGZLWKVHFRQGVUHFRYHU\WLPH
7KH&RQWUDFWRU0DQXIDFWXUHUVKRXOGFDUU\RXWWKHUHTXLUHGWHVWVDQGWRVXEPLWWKHWHVW
UHSRUWDQGFHUWLILFDWHV

1RLVH/HYHO

7KH*HQHUDWRUVDQGWKH(PHUJHQF\3RZHU6XSSO\6\VWHPVKDOOPHHWWKHUHTXLUHPHQWVRI
WKHQRLVHOHYHOFULWHULD

$ 'LHVHOV(QJLQH

7KH HQJLQH VKDOO EH RI WKH KHDY\ GXW\ IRXUF\FOH FRPSUHVVLRQ LJQLWLRQ W\SH 7KH HQJLQH
VKDOOEHWXUERFKDUJHGZLWKDLUFRROHGFKDUJHDQGYHHIRUP7KHHQJLQHVKDOOEHFHUWLILHGE\
WKHHQJLQHPDQXIDFWXUHUIRULWVFDSDELOLW\LQGULYLQJDJHQHUDWRU\LHOGLQJD.:UDWLQJDW
USPDVVSHFLILHGKHUHLQ7KHHQJLQHVKDOOEHFDSDEOHRIGULYLQJWKHJHQHUDWRURI

3DJHRI

WKLV UDWLQJ RQ D EDVLV IRU WKH GXUDWLRQ RI QRUPDO XWLOLW\ VRXUFH LQWHUUXSWLRQV IRU DPELHQW
FRQGLWLRQVRIq&

% ([KDXVW6\VWHP

$UHVLGHQWLDOGHVHUWW\SHVLOHQFHURIVXLWDEOHVL]HDVUHFRPPHQGHGIRUORZQRLVHRSHUDWLRQ
VKDOOEHVXSSOLHGE\WKHHQJLQHPDQXIDFWXUHUDQGWRHQVXUHWKDWEDFNSUHVVXUHGRHVQRW
H[FHHG WKH YDOXH VSHFLILHG E\ WKH PDQXIDFWXUHU )OH[LEOH H[KDXVW FRQQHFWLRQV VKDOO EH
SURYLGHG([KDXVWSLSHVKDOOEHEODFNVWHHOSLSHPHGLXPFODVVDQGVKDOOEHLQVXODWHGZLWK
PPWKLFNQHVVRIFDOFLXPVLOLFDWHZLWKPPWKLFNQHVVRIVWDLQOHVVVWHHORUDOXPLQXP
MDFNHW
:KHQH[KDXVWSLSHSDVVWKURXJKZDOOVRUURRIDVXLWDEOHZHDWKHUSURRIVOHHYHRUWKLPEOH
VKDOOEHSURYLGHGWRLVRODWHH[KDXVWSLSHIURPWKHEXLOGLQJ([KDXVWSLSHDQGVLOHQFHUVVKDOO
EHVXSSRUWHGIURPWKHFHLOLQJE\VSHFLDOYLEUDWLRQLVRODWLQJKDQJHUVDQGWKHSLSHVKDOOEH
VODQWHGDZD\IURPWKHHQJLQHDQGDFRQGHQVDWHWUDSILWWHGDWWKHORZHVWSRLQWV$SSURYHUDLQ
FDSVVKDOOEHLQVWDOOHGDWWKHGLVFKDUJHHQGRIWKHH[KDXVWSLSHRQWKHURRI
6XLWDEOH IOH[LEOH H[SDQVLRQ MRLQWV VKDOO EH SURYLGHG DORQJ WKH SLSH UXQ WR WDNH FDUH RI
H[SDQVLRQUHTXLUHPHQW
7KH FRPSOHWH H[KDXVW V\VWHP VKDOO EH FDSDEOH RI OLPLWLQJ WKH QRLVH OHYHO DW WKH H[WHUQDO
RXWOHWWRG%$DWWKUHHPHWHUVIURPWKHHQGRIWKHH[KDXVWSLSHJHQHUDWRUURRP
6XLWDEOHJXDUGVVKDOOEHSURYLGHGZLWKWKHH[KDXVWSLSHWRSUHYHQWVPDOODQLPDOVUHSWLOHV
IURPHQWHULQJ

& (QJLQH&RROLQJ6\VWHP

7KHHQJLQHVKDOOEHUDGLDWRUFRROHGE\DQHQJLQHPRXQWHGUDGLDWRUV\VWHPLQFOXGLQJEHOW
GULYHQSXVKHUIDQFRRODQWSXPSDQGWKHUPRVWDWWHPSHUDWXUHFRQWURODQGFRRODQWFRUURVLRQ
UHVLVWRUILOWHUZLWKUHSODFHDEOHHOHPHQWV5DGLDWRUVKDOOEHGHVHUWW\SH7KHUDGLDWRUVKDOOEH
SURYLGHGZLWKDGXFWDGDSWHUIODQJHSHUPLWWLQJWKHDWWDFKPHQWRIDLUGLVFKDUJHGXFWDQGWR
GLUHFWWKHGLVFKDUJHRIUDGLDWRUDLUWKURXJKWKHZDOO7KH&RQWUDFWRUVKDOOSURYLGH GXFWV
DQG IOH[LEOH GXFW FRQQHFWLRQ EHWZHHQ WKH GXFW DGDSWHU IODQJH DQG WKH ZDOO JUDYLW\VKXW
ORXYHU 7KH FRROLQJ V\VWHP DQG WKH *HQHUDWRU VHW VKDOO EH GHVLJQHG IRU & $PELHQW
WHPSHUDWXUH

' )LOWHU

5HSODFHDEOHHOHPHQWW\SHILOWHUVVKDOOEHSURYLGHGRQWKHHQJLQHIRUIXHORLOOXEULFDWLQJRLO
DQGDLUFOHDQHU)LOWHUVKDOOEHGHVHUWW\SH

( *RYHUQRU

7KHJRYHUQRUVKDOOEHRIWKH(OHFWURQLFW\SH)UHTXHQF\UHJXODWLRQVKDOOEHZLWKLQ
RIUDWHGIUHTXHQF\GXULQJVWHDG\VWDWHFRQGLWLRQ)UHTXHQF\YDULDWLRQVKDOOEHZLWKLQ
VHFRQGVUHFRYHU\WLPHZKHQORDGLVVWHSSHGIURPWRORDG

) 6WDUWLQJ6\VWHP

EDWWHULHVIRUVWDUWLQJVKDOOEHRIWKHQLFNHOFDGPLXPW\SH9ROWKHDY\GXW\GLHVHOVWDUWLQJ
W\SHDQGRIVXIILFLHQWFDSDFLW\WRDOORZFRQVHFXWLYHVWDUWDWWHPSWVHDFKRIVHFRQGVZLWK
PLQXWHLQWHUYDOV,WVKDOOEHSRVVLEOHE\PHDQVRIDVHOHFWRUWRDOWHUWKHVWDUWLQJVHTXHQFH
WRSURYLGHDVLQJOHVWDUWDWWHPSWRIPLQXWHEHIRUHORFNRXWDQGDODUP7KHEDWWHU\XVHGIRU
VWDUWLQJPD\DOVREHXVHGWRHQHUJLVHWKHGLHVHOSODQWFRQWUROV\VWHPEXWVKDOOKDYHHQRXJK
FDSDFLW\UHPDLQLQJ DIWHU HQJLQHV VWDUW DWWHPSWV WRHQHUJLVH WKH

3DJHRI

V\VWHPFRQWLQXRXVO\IRUKRXUV7KHFRQWUROV\VWHPVKDOOEHVXLWDEOHWRFRQWLQXHRSHUDWLQJ
FRUUHFWO\GXULQJWKHYROWDJHGLSVRFFXUULQJRQWKHEDWWHU\GXULQJWKHHQJLQHVWDUWV

* (QJLQH)XHO6\VWHP

7KHHQJLQHIXHOV\VWHPDQGIXHOWDQNVKDOOFRQIRUPWRWKHIROORZLQJVWDQGDUGV

1)3$1R )ODPPDEOHDQGFRPEXVWLEOHOLTXLG
FRGH
1)3$1R &RPEXVWLRQOLTXLGDQGJDVWXUELQHV

'DLO\DQGIXHOVWRUDJH7DQN

x )XHO VXSSO\ V\VWHP WR WKH HQJLQH VKDOO EH PDLQWDLQHG E\ D VHSDUDWH GD\ WDQN DQG
VWRUDJH WDQN ORFDWHG LQ WKH URRP 'DLO\ IXHO WDQN VKDOO EH VXIILFLHQW FDSDFLW\ IRU
FRQWLQXRXVUXQRIKRXUVDWIXOOORDGDQGVWRUDJHWDQNVKDOOEHVXIILFLHQWIRUKRXUV
XQOHVV RWKHUZLVH VSHFLILHG LQ WKH 3URMHFW 'RFXPHQWDWLRQ 7KH WDQNV VKDOO EH
PDQXIDFWXUHGIURPPLOGVWHHOWRDUHFWDQJXODUVKDSHLQDFFRUGDQFHZLWK%6DQG
VKDOOEHFRPSOHWHZLWKWKHIROORZLQJPLQLPXPHTXLSPHQWDQGIDFLOLWLHV
x ,QVSHFWLRQFRYHU
x YHQWEUHDWKHUSLSH
x ILOOHUSLSHFRQQHFWLRQ
x RYHUIORZFRQQHFWLRQ
x GUDLQYDOYHDQGVXPSGUDLQ
x HPHUJHQF\GXPSYDOYHRSHUDWHGE\WKHILUHDODUPV\VWHPDQGE\DIXVLEOHOLQN
PRXQWHGRYHUWKHGLHVHOHQJLQH
x GLDOW\SHFRQWHQWVJDXJHFDOLEUDWHGLQJDOORQVDQGOLWHUV
x OHYHOVZLWFKHVWRFRQWUROIXHOWUDQVIHUSXPS
x OHYHOVZLWFKHVWRRSHUDWHKLJKDQGORZIXHOOHYHODODUPFLUFXLWVLQWKHGLHVHODOWHUQDWRU
VHWFRQWUROSDQHO
x OLIWLQJOXJV
x )LUHILJKWLQJV\VWHPDQGRWKHUVDVVKRZQLQGUDZLQJV
x ,QWHUIDFHZLWK%$6

+ )O\ZKHHO

7KHIO\ZKHHOVKDOOEHRIWKHVROLGGLVFW\SHDFFXUDWHO\EDODQFHG

, /XEULFDWLRQ

7KHODUJHFDSDFLW\JHDUSXPSVKDOOSURYLGHSUHVVXUHOXEULFDWLRQWRDOOEHDULQJVDQGRLOVXSSO\
IRUSLVWRQFRROLQJ$OOSUHVVXUHOLQHVVKDOOEHLQWHUQDOO\GULOOHGSDVVDJHVLQF\OLQGHUEORFNDQG
KHDGV

- (QJLQH3URWHFWLRQ'HYLFHV

(QJLQHSURWHFWLRQGHYLFHVVKDOOKDYHVHQVLQJHOHPHQWVORFDWHGRQWKHHQJLQHWRLQLWLDWHWKH
IROORZLQJSUHOLPLQDU\DODUPVDQGHQJLQHVKXWGRZQV

/RZOXEULFDWLRQRLOSUHVVXUHDODUP

3DJHRI

+LJKFRRODQWWHPSHUDWXUHDODUP
/RZOXEULFDWLRQRLOSUHVVXUHVKXWGRZQ
+LJKFRRODQWWHPSHUDWXUHVKXWGRZQ
2YHUVSHHGVKXWGRZQ

. $QWLYLEUDWLRQ

6SULQJ W\SH DQWLYLEUDWLRQ GHYLFHV VKDOO EH SURYLGHG WR PHHW WKH ODWHVW VWDQGDUG DQG WKH
UHTXLUHPHQWRI$6+5$(
9LEUDWLRQ&DOFXODWLRQV7KH&RQWUDFWRUWRFDUU\RXWWKHYLEUDWLRQFDOFXODWLRQVEDVHGRQWKH
DSSURYHG JHQHUDWRU VHWV 7KH FRQWUDFWRU WR SURYLGH DOO PHDVXUHV DQG PDWHULDO ODERUHG
ZLWKRXWDQ\H[WUDFRVWWRUHDFKWKHHVWDEOLVKHGYLEUDWLRQVUHTXLUHPHQWV

/ (QJLQH3DQHO

7KHHQJLQHSDQHOPRXQWHGRQWKHHQJLQHVKDOOFRQVLVWRIEXWQRWOLPLWHGWRWKHIROORZLQJ
FRPSRQHQWV

2LOWHPSHUDWXUHJDXJH
2LOSUHVVXUHJDXJH
:DWHUWHPSHUDWXUHJDXJH
7DFKRPHWHU
6WDUWVWRSSXVKEXWWRQ

0 $OWHUQDWRU

7KH DOWHUQDWRU VKDOO EH RI WKH VLQJOH EHDULQJ EUXVKOHVV VFUHHQ SURWHFWHG W\SH 7KH
V\QFKURQRXV DOWHUQDWRU VKDOO KDYH WZRHQG VKLHOG EDOO RU UROOHU EHDULQJ ZLWK D VSHFLDO
GDPSHUZLQGLQJWRSUHYHQWIOLFNHU7KHDOWHUQDWRUVKDOOEHVSHFLDOO\GHVLJQHGIRUGLUHFWGLHVHO
HQJLQHGULYHDQGIRUSURWHFWLRQDJDLQVWLQVHFWVDWWDFNLQJWKHORDGZLUHV7KHFRQVWUXFWLRQRI
WKHDOWHUQDWRUVKDOOFRQIRUPWR1(0$0*

1 5DWLQJ

7KH DOWHUQDWRU VKDOO EH UDWHG DV LQGLFDWHG RQ WKH GUDZLQJ DQG VKDOO EH UDWHG DW 3)
99SKDVHZLUH+]DWWKHVSHHGRI530

2 9ROWDJH5HJXODWRU

7KHYROWDJHUHJXODWRUVKDOOEHRIDVROLGVWDWHW\SHDQGVKDOOEHRSHUDWHGZLWKRYHUDQGXQGHU
VSHHG OLPLW VZLWFKHV WR PDLQWDLQ WKH DOWHUQDWRU WHUPLQDO YROWDJH ,W VKDOO EH FDSDEOH RI
FRQWUROOLQJWKHWHUPLQDOYROWDJHZLWKLQRIQRUPDOYROWDJHIURPQRORDGWRIXOOORDGDW
LQGHSHQGHQWVSHHGDQGIRUDQ\FRQVWDQWORDG

9ROWDJHGLSVKDOOEHOLPLWHGWRVHFRQGUHFRYHU\WLPHZKHQORDGLVVWHSSHGIURP
WRORDGVLQJOHVWHS

7HUPLQDOYROWDJHVKDOOEHDGMXVWDEOHZLWKLQRIWKHUDWHGYROWDJH

3 )UHTXHQF\9DULDWLRQ

)UHTXHQF\YDULDWLRQDWDQ\VWHDG\ORDGVKDOOEHZLWKLQDEDQGZLGWKRI

3DJHRI


)UHTXHQF\GLSVKDOOEHOLPLWHGWRVHFRQGVUHFRYHU\WLPHZKHQORDGLVVWHSSHGIURP
WRORDGVLQJOHVWHS

4 6KRUW&LUFXLW

7KH DOWHUQDWRU VKDOO VXVWDLQ D VKRUW FLUFXLW FXUUHQW DV GHWDLOHG LQ RWKHU VHFWLRQV RI WKH
VSHFLILFDWLRQVDQGRWKHUGRFXPHQWV

5 6WDWRU

7KHVWDWRUIUDPHVKDOOEHPDGHRIFDVWLURQRUZHOGHGVWHHO7KHVWDWRUFRUHVKDOOEHPDGH
RIVSHFLDOO\VHOHFWHGVKHHWVWHHOVWDPSLQJRIKLJKSHUPHDELOLW\DQGORZK\VWHUHVLVORVV(DFK
VWDPSLQJVKDOOEHLQVXODWHGZLWKYDUQLVKVRWKDWWKHLURQORVVLVUHGXFHGWRPLQLPXP

6 6WDWRU:LQGLQJ

7KHVWDWRUZLQGLQJVVKDOOEHVWDUFRQQHFWLRQZLWKWKHQHXWUDODYDLODEOHIRUZLUHFRQQHFWLRQ
RI9

7 5RWRU

7KH URWRU SROH VKDOO EH PDGH RI HOHFWULFDO VWHHO ODPLQDWLRQV ULJLGO\ FODPSHG WRJHWKHU DQG
G\QDPLFDOO\EDODQFHG7KHEROWHGSROHW\SHLVSUHIHUDEOH

8 ([FLWHU

([FLWHUVKDOOEHRISHUPDQHQWPDJQHWVHSDUDWHGH[FLWDWLRQV\VWHP

9 ,QVXODWLRQ

7KH VWDWRU DQG URWRU ZLQGLQJV VKDOO EH LQVXODWHG ZLWK LQVXODWLRQ PDWHULDOV RI WKH KLJKHVW
TXDOLW\IXOO\FDSDEOHRIVHUYLFHXQGHUKLJKKXPLGLW\LQWURSLFDOFRQGLWLRQVZLWK&ODVV)RU+
LQVXODWLRQIRUERWKWKHURWRUDQGWKHVWDWRU

: (QJLQH$OWHUQDWRU$VVHPEO\

7KHVWDWRUVKDOOEHGLUHFWO\FRQQHFWHGWRWKHHQJLQHIO\ZKHHOKRXVLQJDQGWKHURWRUVKDOOEH
GULYHQWKURXJKDIOH[LEOHODPLQDWHGVWHHOGLVF%RWKDOWHUQDWRUDQGHQJLQHPXVWEHPRXQWHG
RQDFRPPRQEDVHDQGVKDOOEHDVVHPEOHGE\WKHHQJLQHPDQXIDFWXUHU

7KH HQJLQH DQG DOWHUQDWRU ZKLFK DUH PRXQWHG RQ WKH VDPH VWHHO EDVH IUDPH VKDOO EH
LQVWDOOHGRQDFRQFUHWHSDG

; *HQHUDWRU6HW/RFDO&RQWURO3DQHO

7KHJHQHUDWRU/RFDOFRQWUROSDQHOVKDOOEHPRXQWHGRQWKHWRSRIWKHDOWHUQDWRUFRQGXFWER[
RUDVRWKHUZLVHDJUHHG
7KHJHQHUDWRU/RFDOFRQWUROSDQHOVKDOOFRQVLVWRIEXWQRWOLPLWHGWRWKHIROORZLQJFRPSRQHQWV

2QHWULSOHSROHDLUFLUFXLWEUHDNHUZLWKSDGORFNVKXQWWULSWKUHHSKDVH
RYHUFXUUHQWUHOHDVHDX[LOLDU\FRQWDFWUDWLQJDVLQGLFDWHGRQWKHGUDZLQJV

3DJHRI

$PPHWHUVDPPHWHUV
9ROWPHWHU
9ROWVHOHFWRUVZLWFK
'&DPPHWHU
,QGLFDWLQJIUHTXHQF\PHWHU
,QGLFDWLQJZDWWPHWHUSKDVHZLUHXQEDODQFHGORDG
:DWWKRXUPHWHUSKDVHZLUHXQEDODQFHGORDG
6HWRIFXUUHQWWUDQVIRUPHUV
6HWRILQGLFDWLQJODPSV/('W\SH
6HWRILQVWUXPHQWIXVHV
6HWRISURWHFWLYHUHOD\V

$XGLEOH9LVXDO$ODUPZLWKVLOHQFHEXWWRQ

(PHUJHQF\6WRSSXVKEXWWRQ

5XQQLQJKRXUPHWHU

)DLOWRV\QFKURQL]H±$PEHU

+LJKHQJLQHWHPSHUDWXUHDODUP±$PEHU

/RZRLOSUHVVXUHDODUP±$PEHU

/RZHQJLQHWHPSHUDWXUH±$PEHU

+LJKWHPSHUDWXUHRIJHQHUDWRUZLQGLQJ±$PEHU

1RW±LQ±DXWR±DPEHU)ODVKLQJ

*HQHUDWRURYHUFXUUHQW±5HG

/RVVRIILHOG±5HG

5HYHUVHSRZHU±5HG

+LJKHQJLQHWHPSHUDWXUHVKXWGRZQ±5HG

/RZRLOSUHVVXUHVKXWGRZQ±5HG

2YHUFUDQN±5HG

2YHUYROWDJH±5HG

2YHUVSHHG±5HG

&RQWUROORFNHGRXW±5HG)ODVKLQJ

/RZFRRODQWOHYHO±5HG

&%IDLOWRFORVH±5HG

2WKHUDODUPVDQGLQGLFDWLRQV

3DJHRI

2WKHUDFFHVVRULHVDFFRUGLQJWRWKHPDQXIDFWXUHU
VGHVLJQ

7KHJHQHUDWRU/RFDOFRQWUROSDQHOVKDOOKDYHWKHPHWHULQJVHFWLRQLQGLFDWLRQ/('V
DQG DQG (OHFWURQLF 0RQLWRULQJ $QG 'LVSOD\ 3DQHO ZLWK /&' WKH 0RQLWRULQJ $QG
'LVSOD\ 3DQHO VKDOO GLVSOD\ DOO DODUPV JHQHUDWRU VWDWXV FRRODQW WHPSHUDWXUH RLO
SUHVVXUH530FXUUHQWYROWDJHIUHTXHQF\ZDWW9$3)WRWDOUXQQLQJKRXUVIXHO
FRQVXPSWLRQDQGRWKHUJHQHUDWRUGDWDDQG/('V

< 9HQWLODWLRQ

L 7KHIROORZLQJYHQWLODWLRQZRUNVDUHUHTXLUHGIRUWKHGLHVHOHQJLQHJHQHUDWRUURRP

x $OXPLQXPLQOHWORXYHUVZLWKZDVKDEOHPHWDOILOWHUVVKDOOEHSURYLGHGIRURXWVLGH
DLULQWDNHLQWRWKHHQJLQHURRP)LOWHUVVKDOOEHVL]HGWRSHUIRUPWKHLUGXW\ZLWK
DIDFHYHORFLW\QRWPRUHWKDQPHWHUSHUVHFRQGZKHQWKHHQJLQHLVUXQQLQJ
)LOWHUVVKDOOEHLQVWDOOHGLQDQDSSURSULDWHDUUDQJHPHQWRQWKHJHQHUDWRUURRP
ZDOOV 7KH WRWDO ILOWHU DUHD VKDOO FRQVLGHU DLU IRU HQJLQH LQWDNHV DQG UDGLDWRU
FRROLQJUHTXLUHPHQWV)LOWHUVZLWKKDQGOHVDQGHDVLO\RSHUDWHGUHWDLQLQJODWFKHV
VKDOOEHSURYLGHG
x 7KHUDGLDWRUVKDOOEHSURYLGHGZLWKDJUDYLW\GDPSHUORXYHU7KHORXYHU VKDOO
EHFDSDEOHRIEHLQJPDQXDOO\RSHQHG

$XWRPDWLF6WDUWHUDQG7UDQVIHU6ZLWFK

7KHDXWRPDWLFWUDQVIHUVZLWFKVKDOOEHORFDWHGLQ0'%LQWKHPDLQHOHFWULFDOURRPVKDOOEHFRPSRVHG
RIDWOHDVWWKHIROORZLQJLQDGGLWLRQWRWKHUHTXLUHPHQWVDVSHUVHFWLRQ±6ZLWFKERDUGVDQG
WKHGUDZLQJV

$ 0RWRURSHUDWHGFLUFXLWEUHDNHUIRUERWKPDLQLQFRPLQJDQGJHQHUDWRUVLGHVKDOOEHUDWHGDV
LQGLFDWHGRQWKHGUDZLQJV

% 0HFKDQLFDODQGHOHFWULFDOLQWHUORFNVKDOOEHSURYLGHGIRUWKHDERYHFLUFXLWEUHDNHUV

& &RQWUROXQLWVKDOOEHRIWKHVROLGVWDWHW\SH

' 2SHUDWLQJWUDQVIHUWLPHLQHLWKHUGLUHFWLRQ

x 1RWWRH[FHHGVHFRQG

( 7LPHGHOD\LQVWDUWLQJWKHHQJLQH

$GMXVWDEOH WRVHFRQGV
3UHVHW VHFRQGV

) 3LFNXSSRLQWSULRUWRWUDQVIHUULQJWKHORDGWRGLHVHOJHQHUDWLQJVHW

$GMXVWDEOH WRRI99
3UHVHW RI99

3DJHRI

* 7UDQVLWLRQWLPHIURPWKHLQVWDQWRIIDLOXUHRIWKHQRPLQDOSRZHUVRXUFHWRGLHVHO
JHQHUDWLRQVHW

x 3UHIHUDEO\QRWH[FHHGLQJVHFRQGV

+ 7LPHGHOD\HPHUJHQF\WRQRUPDO

'HOD\VWKHWUDQVIHUIURPHPHUJHQF\WRSHUPLWVWDELOL]DWLRQRIWKHQRUPDOSRZHU
VRXUFHEHIRUHUHWUDQVIHULVPDGH

$GMXVWDEOH PLQXWHV
3UHVHW PLQXWHV

, 7LPHGHOD\IRUHQJLQHFRROLQJ

)L[HG $SSUR[LPDWHO\PLQXWHV

- ,QQRUPDOFRQGLWLRQWKHHQJLQHVKDOOEHZDUPVWDUWHGXSHYHU\ZHHNIRU
PLQXWHVDGMXVWDEOH:HHNO\H[HUFLVHWKHJHQHUDWRUVHWVKDOOEHUXQIRUQRORDG
([FHSW WKH IDLOXUH RI WKH QRPLQDO SRZHU VRXUFH WKH DXWRPDWLF WUDQVIHU VZLWFK VKDOO EH
WUDQVIHUUHGWRJHQHUDWRUVLGH

$XWRPDWLF3DUDOOHOLQJ*HQHUDWRU$XWRPDWLF6\QFKURQL]LQJ6\VWHPDQG
*HQHUDWRU&RQWURO3DQHO*&3

7KLVVHFWLRQVKDOOEHUHDGLQFRQMXQFWLRQZLWKWKHGUDZLQJVDQGVHFWLRQ±
6ZLWFKERDUGV

$ *HQHUDO5HTXLUHPHQWV

*HQHUDWRUVVKDOOEHFRQQHFWHGLQSDUDOOHODVVKRZQRQWKHGUDZLQJV
*HQHUDWRUSDUDOOHOFRQQHFWLQJVHWVKDOOEHIXOO\DXWRPDWLFIRUXQDWWHQGHG
RSHUDWLRQ

% 3DUDOOHOLQJ&RQWURO6\VWHP

6\QFKURQL]HUFRQWUROGHYLFHVKDOOEH3/&3URJUDPPDEOHORJLFDOFRQWURO
'HYLFH VKDOO FRPPDQG HDFK FLUFXLW EUHDNHU RI JHQHUDWRUV WR FORVH DQG
WUDQVIHU HOHFWULFDO WR PDLQ EXV ZKHQ YROWDJH SKDVH DQG IUHTXHQF\ RI
JHQHUDWRUVPHHWWKHSUHVHWYDOXH
/LPLWIRUPDWFKLQJYROWDJH SKDVH
3KDVHPDWFKLQJZLQGRZVGHJUHH
9ROWDJHPDWFKLQJUDQJH

/RDG6KHGGLQJVKDOOEHDVGHWDLOHGRQWKHGUDZLQJV
6KDOOKDYHDXWRFRQWUROGHYLFHIRU6+$5(/2$'EHWZHHQJHQHUDWRUV
)LUVW VWDUW VHQVRU $OORZV ILUVW DYDLODEOH JHQHUDWRU VHW WR FORVH WR WKH EXV
SRVLWLYHO\ SUHYHQWV RXWRISKDVH SDUDOOHOLQJ LI WZR VHWV UHDFK DFFHSWDEOH
RSHUDWLQJFRQGLWLRQVVLPXOWDQHRXVO\E\SURYLGLQJDORFNRXWVLJQDOWRVHFRQG
DQGVXEVHTXHQWEUHDNHUV

3DJHRI

(OHFWURQLFUHYHUVHSRZHUUHOD\RSHQVWKHJHQHUDWRUPDLQFLUFXLWEUHDNHUZKHQ
UHYHUVHFXUUHQWIORZH[FHHGVDSUHVHWOLPLW
6\QFKURQL]HG (OHFWURQLFDOO\ DGMXVWV SKDVH DQJOH DQG IUHTXHQF\ EHIRUH
SDUDOOHOLQJJHQHUDWRUVHW
3XOVHDODUPV\VWHP6RXQGVDODUPDWHDFKIDXOW
3HUPLVVLYH SDUDOOHOLQJ UHOD\V 3UHYHQW RXWRISKDVH SDUDOOHOLQJ LQ ERWK
DXWRPDWLFDQGPDQXDOPRGHV
5XQQLQJWLPHPHWHUKRXUVPD[LPXPUHDGLQJ
$ODUPDQGVWDWXVLQGLFDWLRQODPSV

x *HQHUDWRUUXQQLQJ±*UHHQ
x $XWRPDWLFPRGH±*UHHQ
x 'HPDQGPRGHVWDQGE\±*UHHQ
x &RROGRZQPRGH±*UHHQ
x *HQHUDWRUVWDWXVIDXOWJHQHUDODODUPWKHGHWDLOVRI
WKH DODUP VKDOO EH DYDLODEOH RQ WKH JHQHUDWRU VHW
ORFDOFRQWUROSDQHOZKHUHWKHRSHUDWRUFDQUHIHUWR
LGHQWLI\

& (DFK*HQHUDWRU&RQWURO3DQHOVKDOOKDYH

(TXLSPHQWLQIURQWRIFRQWUROSDQHOVKDOOKDYH

$&9ROWPHWHUQR¶V$&$PPHWHU)UHTXHQF\0HWHU
:DWWPHWHU[PP'HJUHHVFDOHDFFXUDF\
SRVLWLRQYROWPHWHUVHOHFWRUVZLWFK
/DPSWHVWSXVKEXWWRQ6LPXOWDQHRXVO\WHVWVDOOODPSVRQ
WKHSDQHO
$XWR2II0DQ7HVW VHOHFWRU VZLWFK 6HOHFWV RSHUDWLQJ
PRGH DXWR HQDEOHV DXWRPDWLF RSHUDWLRQ RI WKH
JHQHUDWRUVHWRIIGLVDEOHVRSHUDWLRQDQGRSHQVJHQHUDWRU
SDUDOOHOLQJ EUHDNHU UXQ VWDUWV JHQHUDWRU VHWUDWHG
DPSVDWYROWV
&RQWUROUHVHWSXVKEXWWRQ$IWHUIDXOWKDVEHHQFRUUHFWHG
UHVHWV IDXOW FLUFXLWU\ DQG HQDEOHV DXWRPDWLF UHVWDUW DQG
SDUDOOHOLQJ

(TXLSPHQWLQVLGHFRQWUROSDQHO

*HQHUDWRU SDUDOOHOLQJ FLUFXLW EUHDNHU 3RZHU FLUFXLW
EUHDNHU HOHFWULFDOO\ RSHUDWHG VWDWLRQDU\ PRXQWHG VROLG
VWDWH WULS XQLW /RQJ 6KRUW DQG ,QVWDQWDQHRXV WULSV
F\FOHFORVLQJWLPH
%$6LQWHUIDFH

' DXWRPDWLFVHTXHQWLDOSDUDOOHOLQJRSHUDWLRQ7KLVVKDOOEHUHDGLQFRQMXQFWLRQZLWK
WKHGUDZLQJVDQGVHFWLRQ±6ZLWFKERDUGV

6HTXHQWLDOSDUDOOHOLQJRSHUDWLRQVKDOOEHDVIROORZ

3DJHRI


(PHUJHQF\0RGH

L (DFK JHQHUDWRU VKDOO EH VWDUWHG DXWRPDWLFDOO\ DQG IUHHO\ ZKHQ
UHFHLYHVLJQDOIURPVWDUWVZLWFKRURWKHUFRQWUROGHYLFH
LL )LUVWVWDUWVHQVRUVKDOOFKHFNYROWDJHDQGIUHTXHQF\RIJHQHUDWRU
,I DQ\ JHQHUDWRUV PHHW RI UDWHG YDOXH WKH\ VKDOO EH
FRPPDQGHGWRWUDQVIHUHOHFWULFLW\WRPDLQEXVDVDSSOLFDEOH
LLL $XWRPDWLF WUDQVIHU VZLWFK WKDW LV ILUVW SULRULW\ VKDOO WUDQVIHU
HOHFWULFLW\WRFULWLFDOORDGLPPHGLDWHO\
LY 7RSURWHFWJHQHUDWRUIRUPRYHUORDGSULRULW\FRQWUROV\VWHPVKDOO
FRQWUROWUDQVIHUULQJORDGRIDXWRPDWLFWUDQVIHUVZLWFK
Y :KHQ ILUVW JHQHUDWRU WUDQVIHUV HOHFWULFLW\ WR PDLQ EXV
V\QFKURQL]HUVKDOOFRQWUROWKHUHPDLQLQJXQLWVWRSDUDOOHOWRWKH
PDLQHQHUJL]HGEXVDQGWUDQVIHUHOHFWULFLW\
YL $IWHU HDFK RI JHQHUDWRUV FRQQHFWV LQ SDUDOOHO WKH LVRFKURQRXV
ORDGVKDUHFRQWUROZLOOFRQWUROWKHORDGIRUHDFKJHQHUDWRU
YLL ,IDQ\VWDQGE\JHQHUDWRUFDQQRWVWDUWRUFRQQHFWLQSDUDOOHOWRWKH
V\VWHPZLWKLQWKHWLPHOLPLWDODUPVLJQDODQGLQGLFDWLQJODPSZLOO
EHRSHUDWHG
YLLL /RZHVWSULRULW\ORDGVKDOOEHUHPRYHGIURPWKHV\VWHPLIWKHUHLV
RYHUORDGDWPDLQEXV
L[ /RDGVKDOOEHUHPRYHGDJDLQLIIUHTXHQF\RIWKHV\VWHPFDQQRW
EHEDFNWRWKHVWHDG\VWDWHZLWKLQWKHWLPHOLPLW

/RDG&RQWURO0RGH

L ,QHPHUJHQF\PRGHWKHUHLVDPLFURSURFHVVRUIRUFKHFNLQJWRWDO
FRQQHFWHGORDG,IWRWDOFRQQHFWHGORDGLVORZHQRXJKWRVWRSDQ\
RQH RI JHQHUDWRUV WKH FRQWURO GHYLFH VKDOO FRPPDQG LW
DXWRPDWLFDOO\LQRUGHUWRXWLOL]HRQO\WKHUHTXLUHGJHQHUDWRUVWR
VDYHIXHO
LL 6WRSSHGJHQHUDWRUVFDQUHVWDUWDQGUHFRQQHFWLQSDUDOOHOWRWKH
V\VWHPDXWRPDWLFDOO\ZKHQ

x /RDGLVRYHUWRWKHOLPLWYDOXH
x )DLOXUHRIDQ\JHQHUDWRUFRQQHFWLQJLQSDUDOOHO

5HWXUQLQJWKHXWLOLW\SRZHU

L ,IFRPPDQGLQJVLJQDOIRURSHUDWLRQIURPPDLQFRQWUROSDQHOQRW
UHFHLYHGWKHFLUFXLWEUHDNHURIJHQHUDWRUVVKDOOEHRSHQHGDQG
HQJLQHV VKDOO UXQ IUHHO\ IRU FRRO GRZQ SHULRG WKHQ DOO HQJLQHV
VKDOOVWRS
LL ,QFDVHWKHXWLOLW\SRZHULVLQWHUUXSWHGGXULQJWKHFRROGRZQSHULRG
ILUVW VWDUW VHQVRU VKDOO FRPPDQG WKH VHOHFWHG JHQHUDWRU FLUFXLW
EUHDNHUWRFORVHDQGWUDQVIHUHOHFWULFLW\WRPDLQEXVDXWRPDWLFDOO\
DQGIROORZWKHVDPHVHTXHQFHRISDUDOOHOLQJRSHUDWLRQDVDERYH
0DQXDO0RGH
7KHV\VWHPFDQUXQHLWKHUDXWRPDWLFDOO\RUPDQXDOO\E\XVLQJVHOHFWRU
VZLWFKIRUVHOHFWLQJDXWRPDWLFPRGHRUPDQXDOPRGH

( 6\QFKURQL]LQJ2SHUDWLRQ7HVW
6\QFKURQL]LQJRSHUDWLRQVKDOOEHWHVWHGDQGZRUNVHTXHQFHRIUHODWHGHTXLSPHQW
VKDOOEHFKHFNHGIRUDWOHDVWWKUHHWLPHV

3$57(;(&87,21

,167$//$7,21

3DJHRI


$ 3URGXFW'HOLYHU\6WRUDJH+DQGOLQJ

OLIWDOOJHQHUDWRUHTXLSPHQWXVLQJH\HV\RNHVDQGVNLGVSURYLGHGE\WKH
PDQXIDFWXUHU
GRQRWVWRUHHTXLSPHQWDVVHPEOLHVH[SRVHGWRZHDWKHU
SK\VLFDOO\SURWHFWHGDOOJHQHUDWRUHTXLSPHQWDJDLQVWGDPDJHIURPZRUN
RIRWKHUWUDGHV
FRYHUDOOJHQHUDWRUHTXLSPHQWZLWKVXLWDEOHPDWHULDOWRDYRLGGDPDJHWR
ILQLVK
7KH&RQWUDFWRUVKDOOVXEPLWWKHFDOFXODWLRQWRSURYHWKHDGHTXDF\RI
FDSDFLW\RIWKHFUDQHKHLQWHQGVWRXVHIRULQVWDOODWLRQRIWKHJHQHUDWRU
VHW

% ,QVWDOODWLRQ

WKH HQJLQH DQG JHQHUDWRU VKDOO EH SURSHUO\ DOLJQHG DQG PRXQWHG RQ D
FRPPRQVWHHOEDVHWKURXJKUHVLOLHQWPRXQWLQJVWRSUHYHQWYLEUDWLRQV7KH
ZKROHVHWVKDOOEHIL[HGRQWKHFRQFUHWHVODEVWKURXJKVXLWDEOHQXPEHURI
DGMXVWDEOHVSULQJW\SHYLEUDWLRQLVRODWRUV)RXQGDWLRQDQGRWKHUEXLOGHU
V
ZRUNVKDOOEHDVUHFRPPHQGHGE\WKHPDQXIDFWXUHUDQGDSSURYHGE\WKH
(QJLQHHU
H[FHSWDVPD\EHGHVFULEHGLQWKLV6HFWLRQRUVKRZQRQWKHGUDZLQJVFDUU\
RXW LQVWDOODWLRQ VWULFWO\ LQ DFFRUGDQFH ZLWK WKH PDQXIDFWXUHU
V
UHFRPPHQGDWLRQ
7KH&RQWUDFWRUVKDOOFKHFNDQGFRRUGLQDWHZLWKDOOVHUYLFHVLQJHQHUDWRU
URRPDQGLQVWDOOJHQHUDWRUDVPDQXIDFWXUHUUHFRPPHQGDWLRQWRHQVXUHDOO
JHQHUDWRUVEHDEOHWRRSHUDWHIXOOORDGVDWLVIDFWRU\LQVDPHWLPHGXULQJ
SRZHUIDLOXUH

& &RQWURO%RDUGV

UXQ DOO RXWJRLQJ FDEOHV IURP WKH JHQHUDWRU WR WKH FRQWURO ERDUGV DV
LQGLFDWHGRQWKH3URMHFW'UDZLQJV

' 5HFRUG3ULQW

IL[UHFRUGSULQWRIHDFKJHQHUDWRUVHWIUDPHGEHKLQGQRQJODUHSOH[LJODVV
RQDZDOOQHDUWKHJHQHUDWRUFRQWUROURRP

3$,17:25.

$ 3DLQWZRUNRIHDFKVHWVKDOOEHRIWKHKLJKHVWTXDOLW\WRZLWKVWDQGWKHZRUVWZHDWKHU
FRQGLWLRQVVSHFLILHG$OOVWHHOZRUNVVXFKDVWDQNVSLSHVIUDPHVORXYHUVODGGHUV
SODWIRUP HWF VKDOO EH JLYHQ WZR XQGHUFRDWV RI DQWLUXVW SDLQW DQG WZR HQDPHO
ILQLVKLQJ

6,7(48$/,7<&21752/

$ )LQDO7HVWLQJ

WHVWLQJVKDOOEHFDUULHGRXWDWIXOOORDGDIWHUFRPSOHWLRQRILQVWDOODWLRQE\
WKH*HQHUDWRUPDQXIDFWXUHU
VTXDOLILHGUHSUHVHQWDWLYHLQWKHSUHVHQFHRI
WKH(QJLQHHU

&200,66,21,1*

$ 6LPXODWHG3RZHU)DLOXUH7HVW

HQJLQHJHQHUDWRUVKDOOEHPDGHUHDG\IRUDXWRPDWLFRSHUDWLRQDQGVWDUWHG

3DJHRI

E\PHDQVRIWKHWHVWWUDQVIHUVZLWFKRQWKHDXWRPDWLFWUDQVIHUVZLWFK8QLW
VKDOOUXQIRUWKHGXUDWLRQRIDOOWLPHGHOD\VDQGWKHQDXWRPDWLFDOO\VKXW
GRZQ 7KLV WHVW VKDOO EH PDGH ZLWK XQLW RSHUDWLQJ DQG WZLFH ZLWK XQLW
VLPXODWHGIRUDVWDUWLQJIDLOXUH

,163(&7,21$1'7(676216,7(

$ (TXLSPHQWLQVSHFWHTXLSPHQWXSRQGHOLYHU\WRVLWHDQGUHSRUWDQ\ORVVRUGDPDJH
WRWKH(QJLQHHU

7KH&RQWUDFWRUVKDOOHQVXUHWKDWDOOHTXLSPHQWKDVEHHQWKRURXJKO\WHVWHGDWWKH
PDQXIDFWXUHU
VZRUNVEHIRUHGHOLYHU\DQGDIWHULQVWDOODWLRQRQVLWH7HVWFHUWLILFDWHV
VKRXOGEHSURYLGHGWRWKH(QJLQHHU

7KHGLHVHOJHQHUDWRUVKDOOEHWHVWHGDWZRUNVLQDFFRUGDQFHZLWK%6SDUWV
DQGVKDOOEHFRPSOHWHZLWKDOOHTXLSPHQWZKLFKZLOOEHVXSSOLHGZLWKWKHP

% (DUWKLQJ5HVLVWDQFH7HVWVDUHWREHFDUULHGRXWWRYHULI\VSHFLILHGUHTXLUHPHQWV
7KHUHVLVWDQFHWRHDUWKVKDOOQRWH[FHHGRKP

& /RDG7HVWVDUHWREHFDUULHGRXWDWORZORDGVWRRYHUORDGFRQGLWLRQVDWYDULRXV
SRZHUIDFWRUV0HDVXUHPHQWVDUHWRLQFOXGHYROWDJHDQGIUHTXHQF\GHYLDWLRQVDQG
UHJXODWLQJWLPHXQGHUYDULRXVVWHSORDGLQJFRQGLWLRQVWHPSHUDWXUHPHDVXUHPHQWV
DQG SUHVVXUH PHDVXUHPHQWV DW YDULRXV ORFDWLRQV DQG LQ DFFRUGDQFH ZLWK DQ
DSSURYHGSODQXQGHUFRQGLWLRQVHTXDOWRZRUVWVLWHDPELHQWFRQGLWLRQV

6,7(7(676

6LWHWHVWVVKDOOLQFOXGH

)XOOORDGWHVWIRUKRXUVFRQWLQXRXVLPPHGLDWHO\IROORZHGE\RYHUORDGWHVW
ZLWKRXWLQWHUUXSWLRQ,QVXODWLRQPHDVXUHPHQW)XQFWLRQDOWHVWVIRUYROWDJHVHQVLQJ
DXWRPDWLF VWDUW DQG V\QFKURQL]DWLRQ WUDQVIHU RI ORDG DQG ORDGVKDULQJ DV
DSSOLFDEOH
2SHUDWLRQRIHQJLQHVKXWGRZQDQGDODUPVLJQDOLQJDQGLQGLFDWLRQXQGHUVLPXODWHG
IDXOWFRQGLWLRQV
6LWHWHVWVVKDOOEHPDGHLQWKHSUHVHQFHRIWKH(QJLQHHURUKLVUHSUHVHQWDWLYHIRU
VDWLVIDFWRU\SHUIRUPDQFHRIWKHFRPSOHWHLQVWDOODWLRQDQGIRUFRPSOLDQFHZLWKWKH
VSHFLILHGUHTXLUHPHQWVDQGJXDUDQWHH7KHFRVWUHVXOWLQJIURPWKHWHVWVVKDOOEH
DWWKH&RQWUDFWRU
VH[SHQVH$OODSSDUDWXVWKDWPD\EHUHTXLUHGIRUWKHWHVWVKDOO
EHSURYLGHGE\WKH&RQWUDFWRUZLWKRXWH[WUDFKDUJH3ULRUWRFRPPHQFHPHQWRIWKH
WHVWDGHPRQVWUDWLRQRIDOOWKHFRQWURODQGDODUPIXQFWLRQVRQWKHFRQWUROSDQHO
PXVWEHJLYHQWRWKH(QJLQHHU
'XULQJWKHWHVWVRQVLWHQRLVHPHDVXUHPHQWVVKDOOEHWDNHQRXWVLGHWKHJHQHUDWRU
URRPDQGRIWKHH[KDXVWHPLVVLRQWRGHPRQVWUDWHWKDWWKHQRLVHVSHFLILFDWLRQDV
GHWDLOHGKDVEHHQPHW
/RDG %DQNV SURYLGH ORDGEDQNV WRFDUU\ RXW FRPSOHWH WHVW F\FOHRI WKH V\VWHP
XQGHUORDGLQJDQGVZLWFKLQJFRQGLWLRQVQHFHVVDU\WRSURYHFRPSOLDQFHZLWKWKH
FRQWUDFWUHTXLUHPHQWV
3LSLQJ6\VWHPXVLQJFDUERQGLR[LGHRUQLWURJHQIURPSUHVVXUL]HGF\OLQGHUWHVW
HDFKV\VWHPWRWLPHVQRUPDORSHUDWLQJSUHVVXUH'RQRWVXEMHFWHTXLSPHQW
DSSDUDWXV RU GHYLFHV WR SUHVVXUH H[FHHGLQJ SUHVFULEHG WHVW SUHVVXUH REWDLQHG
IURPQDPHSODWHGDWDRUIURPPDQXIDFWXUHU
VSXEOLVKHGGDWD$SSO\WHVWVEHIRUH
FRQQHFWLQJSLSLQJWRHTXLSPHQW5HPRYHRUGLVFRQQHFWDQGEODQNRIIUHOLHIYDOYHV
LQVWUXPHQWVDQGGHYLFHVWKDWPLJKWEHGDPDJHG E\ WHVW SUHVVXUH 0DLQWDLQ WHVW
SUHVVXUH RQ V\VWHP IRU KRXUV GXULQJ ZKLFK WLPH WKHUH LV WR EH QR
QRWLFHDEOHGURSLQSUHVVXUH&KHFNIRUOHDNVXVLQJVRDSVROXWLRQ,VRODWH
VRXUFHRISUHVVXUHGXULQJWHVWLQJ

3DJHRI

75$,1,1*

7KH&RQWUDFWRUVKDOOLQFOXGHLQKLVSULFHWKHFRVWRIWUDLQLQJRIDWOHDVWWHFKQLFLDQVWR
RSHUDWHDQGPDLQWDLQWKHHTXLSPHQW

7(&+1,&$/3$57,&8/$566&+('8/(6

7KH&RQWUDFWRUVKDOOFRPSOHWHWKH7HFKQLFDO6FKHGXOHPHQWLRQHGLQWKLV
6SHFLILFDWLRQ'HWDLOVWREHSURYLGHGZLWK7HQGHU

7KH7HQGHUHUVKDOOFRPSOHWHDQGVXEPLWZLWKKLVWHQGHUWKHIROORZLQJOLVWRIPDWHULDOV

$ (QJLQH

0DQXIDFWXUHUHQJLQHW\SHDQGUHIHUHQFH
5DWHG%+3WR%6
530
5HFRPPHQGHGIXHO
,QMHFWRUPDQXIDFWXUHUDQGW\SHUHIHUHQFH
)XHOFRQVXPSWLRQOLWHUVKUDW)/RIJHQHUDWRU
7LSVSHHGRIUDGLDWRUFRROLQJIDQ
2YHUORDGFDSDFLW\RQFRQWLQXRXVUDWLQJ
5DGLDWRURYHUDOOGLPHQVLRQV
)UHHDLUVSDFH,QOHW2XWOHW
&RROLQJV\VWHP&RQWUROWKHUPRVWDWVHWWLQJ
9ROXPHRIDLUWKURXJKWKHUDGLDWRUIDQ
9ROXPHRIDVSLUDWHGDLU
7LPHLQVHFRQGVIURPVWDUWEHIRUHWKHIROORZLQJSHUFHQWDJHRIORDGFDQEH
FDUULHG

% $OWHUQDWRU

0DQXIDFWXUHU
7\SHUHIHUHQFH
7\SH
([FLWDWLRQ
,QVWDQWDQHRXVRYHUORDGZKLFKZLOOGHSUHVVWKHYROWDJHE\IURPQRUPDO
,QVWDQWDQHRXVUHJXODWLRQDWSIDQGUHFRYHU\WLPH7KLVLQIRUPDWLRQ
LVUHODWLYHWRXVHRIJHQHUDWRURQLQVWDOODWLRQZLWKKLJKSHDNLQJORDGVHJ
OLIWV
&ODVVRILQVXODWLRQ
6KRUWFLUFXLWFXUUHQWDWWHUPLQDOV

& 9ROWDJH5HJXODWRU

0DQXIDFWXUHU
7\SH
7\SHUHIHUHQFH

' 6WDUWHU%DWWHULHV

0DNHUDQGW\SH

3DJHRI

9ROWDJH
$PSHUHKRXUFDSDFLW\DWKRXUUDWHRIGLVFKDUJH
( &KDUJHU

0DQXIDFWXUHUDQGW\SHUHIHUHQFH
7\SHRIUHFWLI\LQJHOHPHQWDQGPDQXIDFWXUHU
2YHUDOOGLPHQVLRQRIEDWWHU\FKDUJHUXQLWLIVHSDUDWHIURPFRQWUROSDQHO

) )XHO6\VWHP

6HUYLFHWDQNPDQXIDFWXUHUDQGW\SH

* $QWL9LEUDWLRQ0RXQWLQJV

0DQXIDFWXUHU
7\SH
1XPEHUHPSOR\HG
+ROGLQJGRZQEROWVL]HLIUHTXLUHG

+ (QJLQH*HQHUDWRU6HW

2YHUDOOGLPHQVLRQV
:HLJKW
)RUWKHSXUSRVHRIVL]LQJDFKDLQEORFNWKHZHLJKWRIWKHKHDYLHVWLWHPWR
EHUHPRYHGIURPWKHVHWDQGOLIWHGIRUDQ\PDLQWHQDQFHSXUSRVHHJ
DOWHUQDWRU

, 1RLVH/HYHO

$WDGLVWDQFHRIPPIURPGLHVHOJHQHUDWRUVHWLQWHVWED\

/+6LGH
5+6LGH
$JDLQVWEDFNJURXQGQRLVHRI
6LOHQFHUPDQXIDFWXUHUDQGW\SH
$WWHQXDWRUPDQXIDFWXUHUDQGW\SH
0D[LPXPQRLVHOHYHODWDQ\SRLQWPHWHUVIURPWKHJHQHUDWRUURRP

/RXYHUPDQXIDFWXUHUDQGW\SH

5()(5(1&('$7$6+((7

7KLV)RUPWREHFRPSOHWHGE\WKH(OHFWULFDO&RQWUDFWRUDVZHOODVWKHJHQHUDWRU
&RQWUDFWRUDQGWREHVXEPLWWHGIRUDSSURYDO

1DPHDQG$GGUHVVRIJHQHUDWRU&RQWUDFWRU
'HWDLORIZRUNVLQKDQGQRZZLWKSURSRVHGJHQHUDWRU&RQWUDFWRU

1DPHRI*RYHUQPHQW$PRXQWRIJHQHUDWRU3URMHFW,QVWDOODWLRQ:RUNV

D

3DJHRI

E

F

G

H

:HFRQILUPWKDWWKH6WDWHPHQWVJLYHQDERYHDUHWUXHWRWKHEHVWRIRXUNQRZOHGJH
DQGLWLVNQRZQWRXVWKDW(QJLQHHUUHVHUYHVWKHULJKWWRUHIXVHWRDZDUGVXEFRQWUDFW
WRXVLIWKHDERYH6WDWHPHQWVDUHIRXQGWREHLQFRUUHFW

1DPHRI(OHFWULFDO
&RQWUDFWRU
6LJQDWXUH
3RVLWLRQLQFRPSDQ\RI
SHUVRQVLJQLQJ1DPHRI
*HQHUDWRU&RQWUDFWRU
6LJQDWXUH
3RVLWLRQLQFRPSDQ\RISHUVRQVLJQLQJ

(1'2)
6(&7,21

3DJHRI
Compliance statement
Project name : Skilled Nursery Facility @ HMC R0, 1st April 2021
Contractor : Shinbo Qatar
Genset Model : Cummins Generator set – C1675D5A
Reference to the SECTION 16622 – PACKAGED ENGINE GENERATOR SYSTEMS and our offer, please find the compliance as below:-
# SPECIFICATION COMPLIANCE /
REFERENCE CLAUSE NO/NOS REMARKS
CLARIFICATION
1. SECTION 16622 PART 1 - GENERAL
– PACKAGED 1.1 SCOPE Noted
ENGINE A. The work of this Section is integral with the whole of the Project Documentation and is not intended to
GENERATOR be interpreted outside that context.
SYSTEMS B. Co-ordinate the work with all other services affecting the work of this Section.
C. Related Sections are as follows:
Section 16010 – Electrical General Provisions, Materials And Methods
Section 16114 – Cable Trays
Section 16123 – Building Wire And Cable (600 Volts And Below)
Section 16130 – Conduits And Conduit Boxes
Section 16190 – Supporting Devices (Trunking)
Section 16450 – Grounding
Section 16426 – Switchboards
2. D. Short Circuit Capacity:
For Generator Control Panels “GCP” Automatic Transfer Switches “ATS” and Emergency Main Distribution Noted By Contractor
“EMDB” Emergency Distribution Boards and Panel Boards “EDB and EPB” the fault current shown on the
drawings are minimal, and are based on a certain design criteria, the Contractor shall submit the relevant
calculations based on the selected and approved generators, in case that the calculated fault currents are
higher than the design figures, the Contractor shall provide all connected switchboards and relevant
equipment based on the calculated figures without any extra cost to the client.
E. The Generator sets and the emergency power supply system shall be designed for 50C ambient Comply
temperature.
3. F. Noise Levels:
1. Noise Level Criteria: The average noise level shall not exceed the established values below, during the Comply Comply for 85dB@3m
full operation at full capacity at the same time of all generators located at the same room:
1.1 Inside the room max. noise level is 90 dB, Noise level inside the nearby rooms of the SNF Hospital shall
not exceed the max. noise level values established in the mechanical specifications for these rooms in more
than +5dB and at outside the generator room at 3 meters distance shall not exceed 85 dB.
CQ-PGA-005_Rev00: 31-03-2015 Page 1 of 18

2. Noise Level Calculations and Sound Attenuation: The Contractor to carry out the noise
level calculations based on the approved generator sets. The contractor to provide all measures and
material, labour..etc (without any extra cost) to reach the established noise level criteria, including intake
and discharge air sound attenuators, wall and ceiling sound insulation, exhaust system silencers and Comply Comply for 85dB@3m
sound insulation, factory standard sound proof canopies for generator sets (taking into consideration the
dimensions) and all other required to deliver the established noise level criteria.
3. Coordination of Civil, Architectural and other Works related to generator rooms: The Contractor have
to coordinate all works related to generator rooms taking into consideration the noise level calculations
and sound attenuation measures and accordingly the generator room layout.
4. Coordination with the requirements of mechanical specifications: all measures taken by the Contractor Noted
to meet the noise levels criteria, are to be coordinated and integrated with mechanical requirement
section 15241
Noted
4. 1.2 DESCRIPTION
A. The Contractor shall supply, install, commission, test and handover in good operable manner including Comply Comply for supply of diesel generator
400 days guarantee and maintenance of 415 V mains failure, continuous type diesel generator set and set.
should guarantee for electric Generator for 5 years. The set shall be arranged for automatic start on
mains failure. The set shall be complete with diesel engine, generator, control panel, batteries, starting
motor, built-in air cooled radiator, main fuel storage tank, daily fuel storage tank, fuel transfer pumps and
all other accessories as specified.
5. 1.3 REFERENCES
The following standards are referred to in this Part:
BS 5514 Engines Comply
BS 4999 Alternators Comply
ANSI/IEEE 446 Recommended Practice for Emergency and Stand-by Power Systems for Industrial and Noted
Commercial applications
NFPA 110 Standard for Emergency and Standby Power Systems Comply Comply for NFPA 110 requirements for
genset.
6. 1.4 QUALITY ASSURANCE
A. Manufacturer's Qualification:
1. the generator set shall be the product of a single manufacturer regularly engaged as a manufacturer of Comply Comply by Cummins Power generation
such equipment.
7. B. Installer's Qualification:
1. all the Diesel Generator installation work shall be carried out by a Diesel Generator Contractor. Diesel Comply
Generator Contractor shall be one who is normally an agent representing one or more of the approved
makes of D/G sets. Diesel Generator installation shall be supervised, checked and tested by a qualified
CQ-PGA-005_Rev00: 31-03-2015 Page 2 of 18

representative of the manufacturer and handover the works in perfect running order to the satisfaction
of the Engineer.
8. C. Source Quality Control:
1. test the combined engine generator set at the factory and submit the certified test report and Comply
certificate of all tests to the Engineer for his approval.
2. test Generators and emergency power supply at site. Comply
9. D. Local Agent:
1. the manufacturer should have an agent in Qatar who is well experienced in installation and Comply
maintenance of diesel generators of the size specified herein. The agent should have been associated
with the manufacturer for a minimum period of five years.
10. E. Design Criteria:
1. all materials and equipment shall comply with relevant IEC and BS specifications as regards quality of Comply
materials, performance and proving tests
2. the emergency power supply system and its components shall be such as may be properly maintained Comply
and serviced without the necessity of carrying expensive spare part stocks, or being subjected to
interrupted service due to the lack of spare parts
3. emergency generator set shall be designed to allow easy replacement of major items subject to wear. Comply
11. F. Attendance of factory testing and inspection:
1. The Contractor shall arrange for the client’s team to attend and witness the factory testing of all the Noted By the Contractor
Diesel Generator test in accordance with Section 16960.
12. 1.5 SUBMITTALS
A. Shop Drawings: Comply Comply for technical submittal with
1. submit shop drawings for approval in accordance to Section 16010 drawing.
2. shop drawings shall be complete, as to be record drawings, not general outline drawings used for sales
and guide layouts
3. submit a complete wiring diagram for the generator set, drawn on a single standard size sheet,
showing the following:
(i) all components of:
x engine starting control
x engine alarm
x generator control
x battery
x battery charger
x earthing
x transfer switch control relays
(ii) interior wiring, terminals and interconnecting wiring
(iii) certified dimensions and weights
13. 4. submit a composite wiring diagram of the entire emergency transfer system showing all wiring Noted By Contractor
CQ-PGA-005_Rev00: 31-03-2015 Page 3 of 18

between the engine starting panel, engine generator set and the
automatic transfer switches
5. wiring diagrams shall clearly show: Noted We will provide genset wiring diagram
(i) main current conductors, in heavy lines
(ii) control conductors, with colour and/or number coding
(iii) location of relays and apparatus
(iv) description of function, type and catalogue, of all components.
14. 6. alternator Control Panel: Comply We will provide genset controller
(i) submit a schematic line diagram showing: wiring diagram
· Interlocks
· Protection
· Instruments
7. submit general arrangement drawings of the generator installation and the generator building layout. Comply
15. B. Product Data submitted in accordance to Section 16010. Comply as noted Comply for technical submittal with
1. Submit curves showing the actual performance of a similar engine (same model, stroke, etc.) to that data sheets and catalogues.
proposed, superimposed on the standard published performance curves for continuous and maximum
operation
2. Submit the detailed information together with manufacturer's catalogues for the following:
(i) generating set manufacturer
(ii) name and Address
(iii) generating set Model No.
(iv) diesel Engine
(v) radiator
(vi) fuel System
(vii) alternator
(viii) exciter
(ix) starting Battery
(x) control Panel
(xi) service Facilities
16. 3. Test report and certificates Comply
4. List of standard tools Comply
5. List of spare parts ( minimum but not limited to ) as follows Comply
(i) Air filter 2 sets per generator 1 set
(ii) Lubricating filter 2 sets per generator 1 set
(iii) Bypass filter 2 sets per generator 1 set
(iv) Fuel filter 2 sets per generator 1 set
6. Certified factory test reports Comply
7. Instruction manuals for operation and maintenance Comply
CQ-PGA-005_Rev00: 31-03-2015 Page 4 of 18

8. Parts catalogue with manufacturer address. Comply Comply for parts list
9. Calculation for the short circuit fault of the Emergency Power Supply System, based on the selected Noted Comply for generator set
and approved equipments.
17. 1.6 Period of Maintenance and Guarantee:
A. During the maintenance period of 400 days the Contractor shall repair and replace directly, at his own Comply Comply for 5 Years Manufacturer
expense, any failure/ malfunction of the plant, material or work performed or furnished under the warranty
respective works of the Contract.. The guarantee period for all diesel generator sets and Emergency
Power Supply System shall be 5 years.
B. The Contractor shall obtain and submit to the Engineer all guarantees or certificates or warranty Comply
available from the manufacturers, but only as supplementary to the Contractor's own liabilities under the
Project and in no way invalidate them.
C. The Contractor shall be responsible for the satisfactory operation of the D/G installation during the Noted
Maintenance Period. He shall carry out all necessary inspection, preventive maintenance and testing to
keep the set ready all the time. The set shall function satisfactorily during power failures. The Contractor
shall carry out routine load testing of the installation once in every month throughout the Maintenance
Period. The testing shall be carried out in the presence of the Engineer/ End-user. The Contractor shall
himself provide all electrical and mechanical spare parts, grease, lubricating oils, filters, consumable
parts, touch-up paints, etc., required for the maintenance of the D/G installation. The owner shall be
responsible only for providing diesel oil as and when required. The Contractor shall prepare log-books
listed full details of maintenance work and each log-book entry shall be countersigned by the Engineer/
End-user.
D. Guarantee: The guarantee period for all diesel generator sets and Emergency Power Supply System Comply
shall be 5 years, the Guarantor for Generator sets shall be the manufacturer and the Contractor, for the
overall Emergency Power Supply System shall be the Contractor.
18. PART 2 - PRODUCTS

2.1 Diesel Generator Set
General:
Single Step Load Pickup Capacity:
The generator set shall be capable of starting and carrying out the load with 70% of the specified prime Comply Comply for ISO8528 G2 performance.
power (as minimum) single step loading, and the voltage dip during that should not exceed 20% of the
specified voltage with recovery time not exceeding 6 seconds, frequency dip should not exceed 10% with
6 seconds recovery time.
The Contractor/ Manufacturer should carry out the required tests and to submit the test report and Comply
certificates.
Noise Level:
The Generators and the Emergency Power Supply System shall meet the requirements of the noise level Comply Comply for 85dB@3m
criteria.
CQ-PGA-005_Rev00: 31-03-2015 Page 5 of 18

19. A. Diesels Engine
The engine shall be of the heavy duty, four-cycle compression ignition type. The engine shall be turbo- Comply
charged with air-cooled charge and vee-form. The engine shall be certified by the engine manufacturer
for its capability in driving a generator yielding a KW rating at 1,500 rpm. as specified herein. The engine
shall be capable of driving the generator of this rating on a basis for the duration of normal utility source
interruptions for ambient conditions of 50’C.
20. B. Exhaust System
A residential desert type silencer of suitable size as recommended for low noise operation shall be Comply Comply for residential type silencer
supplied by the engine manufacturer. ( and to ensure that back pressure does not exceed the value and flexible bellow, 75mm insulation
specified by the manufacturer) Flexible exhaust connections shall be provided. Exhaust pipe shall be black and aluminum cladding.
steel pipe, medium class and shall be insulated with 40 mm thickness of calcium silicate with 0.6 mm
thickness of stainless steel or aluminium jacket.
When exhaust pipe pass through walls or roof, a suitable weatherproof sleeve or thimble shall be Comply Comply for exhaust muffler with
provided to isolate exhast pipe from the building. Exhaust pipe and silencers shall be supported from the spring hanger and exhaust pipe with
ceiling by special vibration isolating hangers and the pipe shall be slanted away from the engine and a fixed installation
condensate trap fitted at the lowest points. Approve rain caps shall be installed at the discharge end of
the exhaust pipe on the roof.
Suitable flexible expansion joints shall be provided along the pipe run to take care of expansion Noted Not applicable for the shorter distance
requirement.
The complete exhaust system shall be capable of limiting the noise level at the external outlet to 85 dB Comply Comply for acoustic treatment
(A) at three meters from the end of the exhaust pipe / generator room. 85dB@3m
Suitable guards shall be provided with the exhaust pipe to prevent small animals/ reptiles from entering. Comply Comply for rain cap
21. C. Engine Cooling System
The engine shall be radiator-cooled by an engine-mounted radiator system including beltdriven Comply Comply for set-mounted radiator.
pusher fan, coolant pump and thermostat temperature control and coolant corrosion resistor filter with Installation, ducting by Contractor.
replaceable elements. Radiator shall be desert type. The radiator shall be provided with a duct adapter
flange permitting the attachment of air discharge duct, and to direct the discharge of radiator air through
the wall. The Contractor shall provide ducts and flexible duct connection between the duct adapter
flange and the wall gravity-shut louver.The cooling system and the Generator set shall be designed for
50° C Ambient temperature.
22. D. Filter
Replaceable element type filters shall be provided on the engine for fuel oil, lubricating oil and air Comply
cleaner. Filter shall be desert type
23. E. Governor
The governor shall be of the Electronic type. Frequency regulation shall be within + 0.25 % of rated Comply as noted Comply for +/-0.25%.
frequency during steady state condition. Frequency variation shall be within + 3 %, 6 seconds recovery Comply within ISO8528 G2
time when load is stepped from 0 % to 60 % load. performance class limits.
24. F. Starting System
CQ-PGA-005_Rev00: 31-03-2015 Page 6 of 18

batteries for starting shall be of the nickel cadmium type, 24 Volt, heavy duty diesel starting type and of Comply
sufficient capacity to allow 6 consecutive start attempts each of 15 seconds with 1 minute intervals. It
shall be possible by means of a selector to alter the starting sequence to provide a single start attempt of
1 minute before lockout and alarm.
The battery used for starting may also be used to energise the diesel plant control system but shall have Comply
enough capacity remaining after 3 engines start attempts to energise the system continuously for 24
hours. The control system shall be suitable to continue operating correctly during the voltage dips
occurring on the battery during the engine starts.
25. G. Engine Fuel System
The engine fuel system and fuel tank shall conform to the following standards. Noted
- NFPA No. 3 : Flammable and combustible liquid code
- NFPA No. 37 : Combustion liquid and gas turbines
Daily and fuel storage Tank:
-Fuel supply system to the engine shall be maintained by a separate day tank and storage tank located in Comply
the room. Daily fuel tank shall be sufficient capacity for continuous run of 8 hours at full load and storage
tank shall be sufficient for 72 hours, unless otherwise specified in the Project Documentation. The tanks
shall be manufactured from mild steel to a rectangular shape in accordance with BS 799 and shall be
complete with the following minimum equipment and facilities:-
-Inspection cover Comply
-vent/breather pipe Comply
-filler pipe connection Comply
-overflow connection Comply
-drain valve and sump drain Comply
-emergency dump valve operated by the fire alarm system and by a fusible link mounted over the diesel Noted By Contractor
engine
-dial type contents gauge calibrated in gallons and litres Comply Comply in %
-level switches to control fuel transfer pump Comply
-level switches to operate high and low fuel level alarm circuits in the diesel alternator set control panel Comply
-lifting lugs. Comply
-Fire fighting system and others as shown in drawings. Noted By Contractor
-Interface with BAS. Comply
26. H. Flywheel
The flywheel shall be of the solid disc type, accurately balanced. Comply
I. Lubrication
The large capacity gear pump shall provide pressure lubrication to all bearings and oil supply for piston Comply
cooling. All pressure lines shall be internally drilled passages in cylinder block and heads.
27. J. Engine Protection Devices
Engine protection devices shall have sensing elements located on the engine to initiate the following Comply
CQ-PGA-005_Rev00: 31-03-2015 Page 7 of 18

preliminary alarms and engine shutdowns:-
- Low lubrication oil pressure alarm.
- High coolant temperature alarm.
- Low lubrication oil pressure shutdown.
- High coolant temperature shutdown.
- Overspeed shutdown.
28. K. Anti-vibration
Spring type anti-vibration devices shall be provided to meet the latest standard and the requirement of Comply Comply for spring type vibration
ASHRAE. isolation as recommended by the
Vibration Calculations: The Contractor to carry out the vibration calculations based on the approved manufacturer.
generator sets. The contractor to provide all measures and material, labour..etc (without any extra cost)
to reach the established vibrations requirements
29. L. Engine Panel
The engine panel mounted on the engine shall consist of, but not limited to, the following components:- Comply
- Oil temperature gauge.
- Oil pressure gauge.
- Water temperature gauge.
- Tachometer.
- Start-stop push-button.
30. M Alternator
The alternator shall be of the single- bearing, brushless, screen protected type. The synchronous Comply
alternator shall have two-end shield ball or roller bearing, with a special damper winding to prevent
flicker. The alternator shall be specially designed for direct diesel engine drive and for protection against
insects attacking the load wires. The construction of the alternator shall conform to NEMA MG 1-22.
31. N. Rating
The alternator shall be rated as indicated on the drawing and shall be rated at 0.8 PF 240V/415V, 3- Comply
phase, 4-wire, 50 Hz at the speed of 1,500 RPM.
32. O. Voltage Regulator
The voltage regulator shall be of a solid state type and shall be operated with over and under speed limit Comply
switches to maintain the alternator terminal voltage. It shall be capable of controlling the terminal
voltage within + 1 % of normal voltage from no-load to full-load at independent speed and + 0.25 % for
any constant load.
Voltage dip shall be limited to 20 %, 6 second recovery time when load is stepped from 0 % to 70 % load Comply Comply. Comply within ISO8528 G2
(single step). limits.
Terminal voltage shall be adjustable within + 5 % of the rated voltage. Comply
33. P. Frequency Variation
Frequency variation at any steady load shall be within a bandwidth of + 0.25 %. Comply
Frequency dip shall be limited to + 3%, 6 seconds recovery time when load is stepped from 0 % to 70 % Comply Comply. Comply within ISO8528 G2
CQ-PGA-005_Rev00: 31-03-2015 Page 8 of 18

load (single step). limits.
34. Q. Short Circuit
The alternator shall sustain a short circuit current, as detailed in other sections of the specifications and Comply
other documents..
35. R. Stator
The stator frame shall be made of cast-iron or welded steel. The stator core shall be made of specially Comply
selected sheet steel stamping of high permeability and low hysteresis loss. Each stamping shall be
insulated with varnish so that the iron loss is reduced to minimum.
36. S. Stator Winding
The stator windings shall be star connection with the neutral available for 4-wire connection of 415V. Comply
37. T. Rotor
The rotor pole shall be made of electrical steel laminations rigidly clamped together and dynamically Comply
balanced. The bolted pole type is preferable.
U. Exciter
Exciter shall be of permanent magnet separated excitation system. Comply
38. V. Insulation
The stator and rotor windings shall be insulated with insulation materials of the highest quality fully Comply Comply for Class H insulation
capable of service under high humidity in tropical conditions with Class F or H insulation for both the
rotor and the stator.
39. W. Engine-Alternator Assembly
The stator shall be directly connected to the engine flywheel housing, and the rotor shall be driven Comply
through a flexible laminated steel disc. Both alternator and engine must be mounted on a common base
and shall be assembled by the engine manufacturer.
The engine and alternator which are mounted on the same steel base frame shall be installed on a Comply
concrete pad.
40. X. Generator Set Local Control Panel
The generator control panel shall be mounted on the top of the alternator conduct box or as otherwise Comply Comply by PCC3.3 controller
agreed.
The generator control panel shall consist of, but not limited to, the following components:-
- One (1) triple pole air circuit breaker with pad lock shunt trip, three-phase overcurrent release, auxiliary Comply Comply for 4P Free standing ACB panel
contact rating as indicated on the drawings. with LSIG protection
- Ammeters (3 ammeters). Comply Comply by PCC3.3 with digital
- Voltmeter. Comply metering
- Volt selector switch. Comply
- DC ammeter Comply
- Indicating frequency meter. Comply
- Indicating watt meter, 3-phase, 4-wire unbalanced load. Comply
- Watt-hour meter, 3-phase, 4-wire unbalanced load. Comply
CQ-PGA-005_Rev00: 31-03-2015 Page 9 of 18

- Set of current transformers. Comply
- Set of indicating lamps, LED type. Comply
- Set of instrument fuses. Comply
- Set of protective relays. Comply
- Audible/ Visual Alarm with silence button Comply
- Emergency Stop push button Comply
- Running hour meter Comply
- Fail to synchronize – Amber Comply as noted
- High engine temperature alarm – Amber Comply as noted
- Low oil pressure alarm – Amber Comply as noted
- Low engine temperature – Amber Comply as noted
- High temperature of generator winding – Amber Comply as noted
- Not – in – auto – amber (Flashing) Comply as noted
- Generator over current – Red Comply as noted
- Loss of field – Red Comply as noted Comply for common led lamp and LCD
- Reverse power – Red Comply as noted display for alarm description for
- High engine temperature shutdown – Red Comply as noted PCC3.3
- Low oil pressure shutdown – Red Comply as noted
- Over crank – Red Comply as noted
- Over voltage – Red Comply as noted
- Over speed – Red Comply as noted
- Control locked out – Red (Flashing) Comply as noted
- Low coolant level – Red Comply as noted
- CB fail to close – Red Comply
- Other alarms and indications Comply
- Other accessories according to the manufacturer's design. Comply
The generator control panel shall have the metering section, indication LEDs and and Electronic
Monitoring And Display Panel with LCD, the Monitoring And Display Panel shall display all alarms,
generator status, coolant temperature, oil pressure, RPM, current, voltage, frequency, watt, VA, PF, total
running hours, fuel consumption and other generator data., and LEDs.
41. Y. Ventilation
(i) The following ventilation works are required for the diesel engine generator room. Noted Ventilation system / louvers by
-Aluminium inlet louvers with washable metal filters shall be provided for outside air intake into the Contractor.
engine room. Filters shall be sized to perform their duty with a face velocity not more than 1 metre per We comply for Sound attenuators and
second when the engine is running. Filters shall be installed in an appropriate arrangement on the exhaust ducting.
generator room walls. The total filter area shall consider air for engine intakes and radiator cooling
requirements. Filters with handles and easily operated retaining latches shall be provided.
-The radiator shall be provided with a gravity damper louver. The louver shall be capable of being Noted Ventilation system/Dampers / louvers
CQ-PGA-005_Rev00: 31-03-2015 Page 10 of 18

manually opened. by Contractor.
42. 2.2 Automatic Starter and Transfer Switch Noted By Contractor
The automatic transfer switch shall be located in MDB in the main electrical room shall be
composed of at least the following (in addition to the requirements as per section 16426 –
Switchboards and the drawings):
A. Motor operated circuit breaker for both main incoming and generator side shall be rated as
indicated on the drawings.
B. Mechanical and electrical interlock shall be provided for the above circuit breakers.
C. Control unit shall be of the solid state type.
D. Operating transfer time in either direction;
- Not to exceed 1/6 second
E. Time delay in starting the engine;
- Adjustable : 1 to 10 seconds
- Preset : 3 seconds
F. Pickup point prior to transferring the load to diesel-generating set;
- Adjustable : 85 % to 100 % of 240V/415V
- Preset : 90 % of 415V/240V
G. Transition time from the instant of failure of the nominal power source to diesel-generation
set.
- Preferably not exceeding 10 seconds.
H. Time delay emergency to normal
Delays the transfer from emergency to permit stabilization of the normal power source
before retransfer is made;
- Adjustable : 1-10 minutes
- Preset : 3 minutes
I. Time delay for engine cooling;
- Fixed : Approximately 4-6 minutes
J In normal condition, the engine shall be warm started-up every week for 15-30
minutes adjustable. (Weekly exercise) the generator set shall be run for no load. Except the
failure of the nominal power source, the automatic transfer switch shall be transferred to generator
side.
43. 2.1 Automatic Paralleling Generator (Automatic Synchronizing System) and Generator Control Comply Comply for PCC3.3 (GCP) genset
Panel(GCP ): control panel and DMC2000 Master
controller.
This section shall be read in conjunction with the drawings and section 16426 – Switchboards: Noted Separate submittal for Totalizing panel
A. General Requirements
1. Generators shall be connected in parallel as shown on the drawings.
2. Generator parallel connecting set shall be fully automatic for unattended operation.
CQ-PGA-005_Rev00: 31-03-2015 Page 11 of 18

B. Paralleling Control System
1. Synchronizer control device shall be PLC (Programmable logical control) Comply Comply by PCC3.3
2. Device shall command each circuit breaker of generators to close and transfer electrical Comply
to main bus when voltage, phase and frequency of generators meet the preset value
3. Limit for matching voltage & phase
Comply
- Phase matching windows + 10 degree
- Voltage matching range 1%
4. Load Shedding shall be as detailed on the drawings.
Comply Comply for 6 level of load shedding
5. Shall have auto control device for SHARE LOAD between generators. Comply
6. First start sensor: Allows first available generator set to close to the bus positively prevents Comply Comply by PCC3.3
out-of-phase paralleling if two sets reach acceptable operating conditions simultaneously
by providing a lockout signal to second and subsequent breakers.
7. Electronic reverse power relay opens the generator main circuit breaker when reverse Comply Comply by PCC3.3
current flow exceeds a preset limit.
8. Synchronized: Electronically adjusts phase angle and frequency before paralleling Comply Comply by PCC3.3
generator set
9. Pulse alarm system: Sounds alarm at each fault Comply Comply by PCC3.3 alarms
10. Permissive paralleling relays: Prevent out-of-phase paralleling in both automatic and Comply
manual modes.
11. Running time meter: 9999.9 hours maximum reading Comply Comply for PCC3.3 digital metering and
- Alarm and status indication lamps: common led indicator with alarm
x Generator running – Green description on LCD display.
x Automatic mode – Green
x Demand mode standby – Green
x Cooldown mode – Green
x Generator status/ fault general alarm (the details of the alarm shall be
available on the generator set local control panel where the operator
can refer to identify).
44. C.Each Generator Control Panel shall have:
1.Equipment in front of control panel shall have Comply
- AC Voltmeter, 3 no’s AC Ammeter, Frequency Meter, Wattmeter: 96 x 96 mm., 90 Degree scale,
1% accuracy.
- 7-position voltmeter selector switch Comply
- Lamp test pushbutton: Simultaneously tests all lamps on the panel Comply
- Auto-Off-Man-Test selector switch: Selects operating mode - auto enables automatic operation Comply Test in Auto mode.
of the generator set, off disables operation and opens generator paralleling breaker, run starts
CQ-PGA-005_Rev00: 31-03-2015 Page 12 of 18

generator set-rated 30 amps at 600 volts.
- Control reset pushbutton: After fault has been corrected, resets fault circuitry and enables Comply
automatic restart and paralleling
12. Equipment inside control panel
- Generator paralleling circuit breaker: Power circuit breaker, electrically operated, stationary Noted
mounted, solid state trip unit (Long, Short, and Instantaneous trips) 5-cycle closing time
- BAS interface. Noted Modbus RTU RS485 for PCC3.3
D. automatic sequential paralleling operation: This shall be read in conjunction with the Noted Separate submittal for Totalizing panel.
drawings and section 16426 – Switchboards: Comply for DMC2000 master
Sequential paralleling operation shall be as follow: controller
1. Emergency Mode
(i) Each generator shall be started automatically and freely when receive signal from start switch or other Comply Comply
control device.
(ii) First start sensor shall check voltage and frequency of generator. If any generators meet 90% of rated Comply
value, they shall be commanded to transfer electricity to main bus as applicable.
(iii) Automatic transfer switch that is first priority shall transfer electricity to critical load immediately. Noted Comply for load control by DMC2000
(load add/shed)
(iv) To protect generator form over load, priority control system shall control transferring load of Comply Comply for load control by DMC2000
automatic transfer switch. (load add/shed)
(v) When first generator transfers electricity to main bus, synchronizer shall control the remaining unit(s) Comply
to parallel to the main energized bus and transfer electricity.
(vi) After each of generators connects in parallel, the isochronous load share control will control the load Comply
for each generator.
(vii) If any standby-generator cannot start or connect in parallel to the system within the time-limit, alarm Comply
signal and indicating lamp will be operated.
(viii) Lowest priority load shall be removed from the system if there is over load at main bus. Comply
(ix) Load shall be removed again if frequency of the system cannot be back to the steady state within the Comply
time-limit.
2. Load Control Mode
(i) In emergency mode, there is a microprocessor for checking total connected load. If total connected Comply
load is low enough to stop any one of generators, the control device shall command it automatically in
order to utilize only the required generator(s) to save fuel.
(ii) Stopped generators can restart and reconnect in parallel to the system automatically when: Comply
Load is over to the limit value.
Failure of any generator connecting in parallel.
3. Returning the utility power Comply
(i) If commanding signal for operation from main control panel not received, the circuit breaker of
CQ-PGA-005_Rev00: 31-03-2015 Page 13 of 18

generators shall be opened, and engines shall run freely for cool down period, then all engines shall stop.
(ii) In case the utility power is interrupted during the cool down period, first start sensor shall command
the selected generator circuit breaker to close and transfer electricity to main bus automatically and
follow the same sequence of paralleling operation as above.
4. Manual Mode Comply
The system can run either automatically or manually by using selector switch for selecting automatic
mode or manual mode.
E. Synchronizing Operation Test Comply
Synchronizing operation shall be tested and work sequence of related equipment shall be checked for at
least three times
PART 3 - EXECUTION
3.1 INSTALLATION Comply Comply for installation.
A. Product Delivery, Storage Handling: Storage by Contractor.
1. lift all generator equipment using eyes, yokes and skids provided by the manufacturer Comply
2. do not store equipment assemblies exposed to weather Comply
3. physically protecte all generator equipment against damage from work of other trades Comply
4. cover all generator equipment with suitable material to avoid damage to finish. Comply
5. The Contractor shall submit the calculation to prove the adequacy of capacity of the crane he intends Noted
to use for installation of the generator set
B. Installation:
1. the engine and generator shall be properly aligned and mounted on a common steel base through Comply Comply for installation. Civil works by
resilient mountings to prevent vibrations. The whole set shall be fixed on the concrete slabs through main contractor.
suitable number of adjustable spring type vibration isolators. Foundation and other builder's work shall
be as recommended by the manufacturer and approved by the Engineer
2. except as may be described in this Section or shown on the drawings carry out installation strictly in Comply
accordance with the manufacturer's recommendation.
3. The Contractor shall check and coordinate with all services in generator room and Comply
install generator as manufacturer recommendation to ensure all generators be able to operate full load
satisfactory in same time during power failure.
C. Control Boards: Comply
1. run all outgoing cables from the generator to the control boards as indicated on the Project Drawings.
D. Record Print: Noted
1. fix record print of each generator set, framed behind non-glare plexiglass, on a wall near the generator
control room.
3.2 PAINT WORK
A. Paint work of each set shall be of the highest quality to withstand the worst weather conditions Comply Comply for generator set and
specified. All steel works such as tanks, pipes, frames, louvers, ladders, platform, etc. shall be given two accessories
undercoats of anti-rust paint and two enamel finishing.
CQ-PGA-005_Rev00: 31-03-2015 Page 14 of 18

3.3 SITE QUALITY CONTROL
A. Final Testing:
1. testing shall be carried out at full load after completion of installation by the Generator manufacturer's Comply
qualified representative in the presence of the Engineer
3.4 COMMISSIONING
A. Simulated Power Failure Test:
1. engine-generator shall be made ready for automatic operation and started by means of the test Comply Comply for testing at site
transfer switch on the automatic transfer switch. Unit shall run for the duration of all time delays and
then automatically shut-down. This test shall be made with unit operating, and twice with unit simulated
for a starting failure.
3.5 INSPECTION AND TESTS ON SITE
A. Equipment: inspect equipment upon delivery to site and report any loss or damage to the Engineer. Comply Comply for factory test reports
The Contractor shall ensure that all equipment has been thoroughly tested at the manufacturer's works
before delivery and after installation on site. Test certificates should be provided to the Engineer.
The diesel generator shall be tested at works in accordance with BS 5514: parts 3-5 and shall be complete
with all equipment which will be supplied with them.
B. Earthing Resistance Tests are to be carried out to verify specified requirements. The resistance to earth Noted By Contractor
shall not exceed 1 ohm.
C. Load Tests are to be carried out at low loads to over load conditions, at various power factors. Comply Comply for 1pf testing at 8 hours at
Measurements are to include voltage and frequency deviations and regulating time under various step site
loading conditions, temperature measurements and pressure measurements at various locations, and in
accordance with an approved plan under conditions equal to worst site ambient conditions.
3.6 SITE TESTS
Site tests shall include:
1. Full load test for 8 hours continuous, immediately followed by 10% overload test, without interruption. Comply as noted Comply for 8 Hours testing at site
Insulation measurement. Functional tests for voltage sensing, automatic start and synchronization,
transfer of load and load-sharing as applicable.
2. Operation of engine shut-down and alarm signalling and indication, under simulated fault conditions. Comply
3. Site tests shall be made in the presence of the Engineer, or his representative, for satisfactory Comply Diesel for testing by Contractor
performance of the complete installation and for compliance with the specified requirements and
guarantee. The cost resulting from the tests shall be at the Contractor's expense. All apparatus that may
be required for the test shall be provided by the Contractor without extra charge. Prior to
commencement of the test, a demonstration of all the control and alarm functions on the control panel
must be given to the Engineer
4. During the tests on site, noise measurements shall be taken outside the generator room and of the Noted By Contractor
exhaust emission to demonstrate that the noise specification as detailed has been met.
5. Load Banks: provide load banks to carry out complete test cycle of the system under loading and Comply Comply for resistive load bank for
switching conditions necessary to prove compliance with the contract requirements. testing
CQ-PGA-005_Rev00: 31-03-2015 Page 15 of 18

6. Piping System: using carbon dioxide or nitrogen from pressurized cylinder, test each system to 1.5 Noted By Contractor
times normal operating pressure. Do not subject equipment, apparatus or devices to pressure exceeding
prescribed test pressure obtained from nameplate data or from manufacturer's published data. Apply
tests before connecting piping to equipment.
Remove or disconnect and blank off relief valves, instruments and devices that might be damaged by test
pressure. Maintain test pressure on system for 24 hours during which time there is to be no noticeable
drop in pressure. Check for leaks using soap solution.
Isolate source of pressure during testing.
3.7 TRAINING
The Contractor shall include in his price the cost of training of at least 2 technicians to operate and Comply
maintain the equipment.
3.8 TECHNICAL PARTICULARS SCHEDULES
The Contractor shall complete the Technical Schedule mentioned in this Specification. Comply
Details to be provided with Tender
The Tenderer shall complete and submit with his tender the following list of materials.
A. Engine Comply
1. Manufacturer engine type and reference. KTA50GS8
2. Rated B.H.P. (to BS 5514). 1725bhp
3. R.P.M. 1500rpm
4. Recommended fuel. No#2 diesel
5. Injector manufacturer and type reference. Cummins
6. Fuel consumption litres /hr. at F.L. of generator. 309 L/H
7. Tip speed of radiator cooling fan. Fixed, 1500rpm pulley belt driven
8. Overload capacity on continuous rating. 10%
9. Radiator-overall dimensions. 2755x2040x1250mm
10. Free air space Inlet Outlet. 11.52m2
11. Cooling system Control thermostat setting. 66-79Deg.C
12. Volume of air through the radiator fan. 28.8 m3/sec
13. Volume of aspirated air. 1.65m3/sec
14. Time in seconds from start before the following percentage of load can be carried: 10 sec
- 100% 60 %
B. Alternator Comply
1. Manufacturer. Cummins Generator Technologies-
Stamford
2. Type reference. Synchronous AC Generator
3. Type. P7D
4. Excitation. Separately by PMG
5. Instantaneous overload which will depress the voltage by 20% from normal. 1950kvA for alternator LRMS curve
CQ-PGA-005_Rev00: 31-03-2015 Page 16 of 18

6. Instantaneous regulation at 0.8 p.f. and recovery time. This information is relative to use of generator +/-1% voltage regulation NL to FL
on installation with high peaking loads e.g. lifts.
7. Class of insulation. Class H
8. Short circuit current at terminals. 5750Amps sustained SC current
C. Voltage Regulator Comply
1. Manufacturer. Cummins
2. Type. Digital AVR
3. Type reference. AUX 105
D. Starter Batteries Comply
1. Maker and type. HBL Nicad batteries
2. Voltage. 24Vdc
3. Ampere-hour capacity at 1hour rate of discharge. 210Ah
E. Charger Comply
1. Manufacturer and type reference. Cummins OEM/DSE
2. Type of rectifying element and manufacturer. Full wave
3. Overall dimension of battery charger unit if separate from control panel 165x305x110mm
F. Fuel System Comply
Service tank manufacturer and type. Cummins OEM-Qatar/Gasco
G. Anti-Vibration Mountings Comply
1. Manufacturer. Cummins OEM
2. Type. Spring type
3. Number employed. 12 Nos
4. Holding down bolt size (if required). 9/12inch
H. Engine Generator Set Comply
1. Overall dimensions. 5811 x 2040 x 2755 mm (LxWxH)
2. Weight. 11,158 kg
3. For the purpose of sizing a chain block-the weight of the heaviest item to be 3318 kg Alternator
removed from the set and lifted for any maintenance purpose, e.g. alternator.
I. Noise Level Comply Comply for sound attenuator
At a distance of 1000 mm. from diesel generator set, in test bay. 85dB@3m
1. L.H. Side.
2. R.H. Side.
3. Against background noise of .
4. Silencer manufacturer and type.
5. Attenuator manufacturer and type.
6. Maximum noise level at any point 10 meters from the generator room.
Louver manufacturer and type
3.9 REFERENCE DATA SHEET Noted Cummins Qatar LLC
CQ-PGA-005_Rev00: 31-03-2015 Page 17 of 18

This Form to be completed by the Electrical Contractor as well as the generator Contractor and to be
submitted for approval
------------------------------------------------------------------------------------------------------------
1. Name and Address of generator Contractor
2. Detail of works in hand now with proposed generator Contractor
------------------------------------------------------------------------------------------------- -----------
Name of Government Amount of generator Project Installation Works
------------------------------------------------------------------------------------------------------------
a.
------------------------------------------------------------------------------------------------------------
b.
c.
------------------------------------------------------------------------------------------------ ------------
d.
------------------------------------------------------------------------------------------------------------
e.
------------------------------------------------------------------------------------------------------------
We confirm that the Statements given above are true, to the best of our knowledge and it is known to
us that Engineer reserves the right to refuse to award sub-contract to us if the
above Statements are found to be incorrect.
Name of Electrical Contractor
Signature
Position in company of person signing
Name of Generator Contractor
Signature
Position in company of person signing
End of Part
CQ-PGA-005_Rev00: 31-03-2015 Page 18 of 18

ϳ. *HQHUDWRUVHWGDWDVKHHWV
Generator set data sheet
Model: C1*** D*A

Frequency: *0 **
Fuel type: Diesel
Spec sheet: SS1*-CPGK

Sound data sheet: MSP-*04*
Standby Prime
Fuel consumption kVA (kW) kVA (kW)
Ratings 1675 (1340) 1500 (1200)
Load 1/4 1/* 3/4 Full 1/4 1/* 3/4 Full
RS gph 24.3 43.7 66.8 91.2 23.3 44.1 62.8 81.6
L/hr 92 165 253 345 88 167 238 309
Engine Standby rating Prime rating

Rngine manufacturer Cummins
Rngine model KTA50 GS8
Configuration Cast ironR60 RR16 cylinder
Aspiration Turbocharged and low temperature after-cooled
Gross engine power outputRRR m 1429 1287
BMRP at set rated loadRRPa 2275 2062
BoreRmm 159
StroReRmm 159
Rated speedRrpm 1500
Piston speedRm/s 7.9
Compression ratio 14.9:1
Lube oil capacityRL 178
RRerspeed limitRrpm 1725 R50
RegeneratiRe powerRRR 116
GoRernor type Rlectronic
Starting Roltage 24 Rolts DC
Fuel flow
MaRimum fuel flowRL/hr 570
MaRimum fuel inlet restrictionRmm Hg 203
MaRimum fuel inlet temperatureRRC 70
power.cummins.com
R2019 Cummins Inc. R DS47-CPGK (07/19)
Air Standby rating Prime rating
3
Combustion airRm /min 99.3 94.9
MaRimum air cleaner restrictionRRPa 6.2
Exhaust
RRhaust gas flow at set rated loadRm3/min 261 242
RRhaust gas temperatureRRC 510 499
MaRimum eRhaust bacRpressureRRPa 6.7
Standard set-mounted radiator cooling

Ambient designRRC 40
Ran loadRRR m 30.0
Coolant capacity (with radiator)RL 496
3
Cooling system air flowRm /sec R 12.7 mm H2R 21.7
Total heat reR
ectionRBtu/min 52430 44750
MaRimum cooling air flow static restriction mm H2R 12.7
Weights* Open Enclosed

Rnit dry weight Rgs 10348 18199
Rnit wet weight Rgs 10967 18818
* R eights represent a set with standard features. See outline drawing for weights of other configurations.
Dimensions Length Width *eight

Standard open set dimensions mm 5811 2033 2330
Rnclosed set standard dimensions (with eRhaust stacR)
12192 2438 2896 (3233)
mm
Genset outline
Rpen set
Rnclosed set
Rutlines are for illustratiRe purposes only. Please refer to the genset outline drawing for an eRact representation of this model.
power.cummins.com
R2019 Cummins Inc. R DS47-CPGK (07/19)
Alternator data
Connection Temp rise *C Duty Alternator Voltage
R yeR3-phase 150/125 S/P PI734D 380 – 440 R
R yeR3-phase 125/105 S/P MRSI804R 3300 R
R yeR3-phase 125/105 S/P HRSI804R 6300 – 6600 R
R yeR3-phase 125/105 S/P HRSI804R 10000 R
R yeR3-phase 125/105 S/P HRSI804R 10500 –11000 R
Ratings definitions
Emergency Standby Limited-Time Running Prime Power (PRP): Base Load (Continuous)
Power (ESP): Power (LTP): Power (COP):
Applicable for supplying Applicable for supplying Applicable for supplying Applicable for supplying
power to Rarying electrical power to a constant power to Rarying electrical power continuously to a
load for the duration of electrical load for limited load for unlimited hours. constant electrical load for
power interruption of a hours. Limited-Time Prime Power (PRP) is in unlimited hours. Continuous
reliable utility source. Running Power (LTP) is in accordance with ISR 8528. Power (CRP) is in
Rmergency Standby Power accordance with ISR 8528. Ten percent oRerload accordance with ISR 8528R
(RSP) is in accordance with capability is aRailable in ISR 3046RAS 2789R
ISR 8528. Ruel stop power accordance with ISR 3046R DIN 6271 and BS 5514.
in accordance with AS 2789RDIN 6271 and
ISR 3046RAS 2789R BS 5514.
DIN 6271 and BS 5514.
Formulas for calculating full load currents:
Three phase output Single phase output
RR R1000 RR RSinglePhaseRactor R1000

Roltage R1.73 R0.8 Roltage
For more information contact your local Cummins distributor

or visit power.cummins.com
R2019 Cummins Inc. All rights reserRed. Cummins is a registered trademarR of Cummins Inc. PowerCommandRAmpSentryRInPower and “Our energy working for you.” are trademarks of
Cummins Inc. Rther companyRproductRor serRice names may be trademarRs or serRice marRs of others. Specifications are subR
ect to change without notice.
DS47-CPGK (07/19)
Specification sheet
Diesel generator
set
KTA50 series
engine
1000kVA - 1675kVA 50 Hz
1120kW - 1545kW 60 Hz
Description
®
®
This Cummins Power Generation Control system – Standard PowerCommand
commercial generator set is a fully integrated electronic control provides total system
power generation system, providing optimum integration including remote start/stop, precise
performance, reliability, and versatility for frequency and voltage regulation, alarm and
stationary standby, prime power, and status message display, AmpSentry protection,
continuous duty applications. output metering, auto-shutdown.
Cooling system - Standard integral set-
Features
mounted radiator system, designed and tested
®
Cummins heavy-duty engine - Rugged for rated ambient temperatures, simplifies facility
4-cycle industrial diesel delivers reliable design requirements for rejected heat.
power, low emissions and fast response to
Enclosures - Optional weather-protective and
load changes.
sound-attenuated enclosures are available.
Permanent magnet generator (PMG) -
Warranty and service - Backed by a
Offers enhanced motor starting and fault
comprehensive warranty and worldwide
clearing short circuit capability.
distributor network.
Alternator - Several alternator sizes offer
selectable motor starting capability with low
reactance 2/3 pitch windings; low waveform
distortion with non-linear loads, fault clearing
short-circuits capability, and class F or H
insulation.
Emissions
Standby rating Prime rating compliance Data sheets
50 Hz 60 Hz 50 Hz 60 Hz
Model kVA (kW) kW (kVA) kVA (kW) kW (kVA) TA Luft – EU Stage 50 Hz 60 Hz
C1400 D5 1400 (1120) 1250 (1000) DS44-CPGK
C1675 D5 1675 (1340) 1400 (1120) DS46-CPGK
C1675 D5A 1675 (1340 1500 (1200) DS47-CPGK
C1250 D6 1270 (1588) 1120 (1400) DS84-CPGK
C1500 D6 1545 (1931) 1286 (1608) DS85-CPGK
cumminspower.com
©2013 Cummins Power Generation Inc. | SS16-CPGK-RevB (1/13)
Generator set specifications
Governor regulation class ISO 8528 G2
Voltage regulation, no load to full load ± 1%
Random voltage variation ± 1%
Frequency regulation Isochronous
Random frequency variation ± 0.25%
EMC compatibility BS EN 61000-6-4 / BS EN 61000-6-2
Engine specifications
Design 4 cycle, V-black, turbo charged and after-cooled
Bore 158.8 mm (6.25 in)
Stroke 158.8 mm (6.25 in)
Displacement 50 L (3067 in3)
Cylinder block engine Sixteen-cylinder vee formation, direct injection, four-cycle diesel
Battery capacity 1800 amps at ambient temperature 32ºF (0°C)
Battery charging alternator 55 amps
Starting voltage 24- volt, negative ground
Fuel system Direct injection
Fuel filter Dual spin on paper element fuel filters with standard water separator
Air cleaner type Dry replaceable element
Lube oil filter type(s) Spin-on paper element full flow and bypass lube oil filters
Standard cooling system 104ºF (40ºC) ambient radiator
Alternator specifications
Design Brushless, 4 pole, drip proof revolving field
Stator 2/3 pitch
Rotor Direct coupled by flexible disc
Insulation system Class H
Standard temperature rise
Exciter type PMG (Permanent magnet generator)
Phase rotation A (U), B (V), C (W)
Alternator cooling Direct drive centrifugal blower fan
AC waveform total harmonic distortion No load <1.5%. Non distorting balanced linear load <5%
Telephone influence factor (TIF) < 50% per NEMA MG1-22.43
Telephone harmonic factor (THF) No load <1.5%. Non distorting balanced linear load <5%
Available voltages
50 Hz line – neutral / line - line 60 Hz line – neutral / line - line
x 220/380* x 1905/3300 x 219/380 x 2400/4160
x 230/400 x 3640/6300 x 254/440 x 7200/12470
x 240/415
240//415 x 3810/6600 x 277/480 x 7620/13200
x 254/440 x 6350/11000 x 347/600 x 7970/13800
*Derate may be applicable at this voltage. Please consult the factory for details.
Generator set options

Engine Alternator Warranty
Heavy
y dutyy air filter Alternator heater 5 years for standby application
Water jacket heater 220/240 v High humidity isolation 2 years for prime application
Exciter voltage regulator (PMG)
Cooling Silencer
Antifreeze 50/50 (Ethylene glycol) Control panel 9 dB attenuation critical silencer
3 pole main circuit breaker 25 dB residential – delivered loose
Enclosure 4 pole main circuit breaker
High-cube 40 ft container
*Note: Some options may not be available on all models - consult factory for availability.
cumminspower.com
PowerCommand 3.3 Control System Engine data
x DC voltage
x Engine speed
x Lube oil pressure and temperature
x Coolant temperature
x Comprehensive FAE data (where applicable)
Other data
x Genset model data
x Start attempts, starts, running hours, kW hours
x Load profile (operating hours at % load in 5% increments)
x Fault history
x Data logging and fault simulation (requires InPower)
An integrated microprocessor based generator set control
system providing voltage regulation, engine protection, alternator
Standard control functions
protection, operator interface and isochronous governing. Refer Digital governing
to document S-1570 for more detailed information on the control. x Integrated digital electronic isochronous governor
AmpSentry – Includes integral AmpSentry protection, which x Temperature dynamic governing
provides a full range of alternator protection functions that are Digital voltage regulation
matched to the alternator provided.
x Integrated digital electronic voltage regulator
Power management – Control function provides battery
x 3-phase, 4-wire line-to-line sensing
monitoring and testing features and smart starting control
system. x Configurable torque matching
Advanced control methodology – Three phase sensing, full AmpSentry AC protection
wave rectified voltage regulation, with a PWM output for stable x AmpSentry protective relay
operation with all load types. x Over current and short circuit shutdown
Communications interface – Control comes standard with x Over current warning
PCCNet and Modbus interface. x Single and three phase fault regulation
Regulation compliant – Prototype tested: UL, CSA and CE x Over and under voltage shutdown
compliant. x Over and under frequency shutdown
Service - InPower™ PC-based service tool available for detailed x Overload warning with alarm contact
diagnostics, setup, data logging and fault simulation. x Reverse power and reverse var shutdown
Easily upgradeable – PowerCommand controls are designed x Field overload shutdown
with common control interfaces.
Engine protection
Reliable design – The control system is designed for reliable
operation in harsh environment. x Battery voltage monitoring, protection and testing
Multi-language support x Overspeed shutdown
x Low oil pressure warning and shutdown
Operator panel features x High coolant temperature warning and shutdown
Operator/display functions x Low coolant level warning or shutdown
x Displays paralleling breaker status x Low coolant temperature warning
x Provides direct control of the paralleling breaker x Fail to start (overcrank) shutdown
x 320 x 240 pixels graphic LED backlight LCD x Fail to crank shutdown
x Auto, manual, start, stop, fault reset and lamp test/panel lamp x Cranking lockout
switches x Sensor failure indication
x Alpha-numeric display with pushbuttons x Low fuel level warning or shutdown
x LED lamps indicating genset running, remote start, not in auto, x Fuel-in-rupture-basin warning or shutdown
common shutdown, common warning, manual run mode, auto x Full authority electronic engine protection
mode and stop
Control functions
Paralleling control functions
x Time delay start and cool down
x First Start Sensor System selects first genset to close to bus
x Real time clock for fault and event time stamping
x Phase Lock Loop Synchronizer with voltage matching
x Exerciser clock and time of day start/stop
x Sync check relay
x Data logging
x Isochronous kW and kVar load sharing
x Cycle cranking
x Load govern control for utility paralleling
x Load shed
x Extended Paralleling (baseload/peak shave) Mode
x Configurable inputs and outputs (4)
x Digital power transfer control, for use with a breaker pair to
x Remote emergency stop
provide open transition, closed transition, ramping closed
transition, peaking and base load functions, Options
x Auxiliary output relays (2)
Alternator data
x Line-to-neutral and line-to-line AC volts
x 3-phase AC current
x Frequency
x kW, kvar, power factor kVA (three phase and total)
cumminspower.com
Emergency standby power (ESP):
Applicable for supplying power to varying electrical
load for the duration of power interruption of a reliable
utility source. Emergency Standby Power (ESP) is in
accordance with ISO 8528. Fuel Stop power in
accordance with ISO 3046, AS 2789, DIN 6271 and BS
5514.
Limited-time running power (LTP):
Applicable for supplying power to a constant electrical This outline drawing is to provide representative configuration
load for limited hours. Limited Time Running Power details for Model series only.
(LTP) is in accordance with ISO 8528.
Prime power (PRP): See respective model data sheet for specific model outline
drawing number.
Applicable for supplying power to varying electrical
load for unlimited hours. Prime Power (PRP) is in Do not use for installation design
accordance with ISO 8528. Ten percent overload
capability is available in accordance with ISO 3046, AS
2789, DIN 6271 and BS 5514.
Base load (continuous) power (COP):
Applicable for supplying power continuously to a
constant electrical load for unlimited hours. Continuous
Power (COP) in accordance with ISO 8528, ISO 3046,
AS 2789, DIN 6271 and BS 5514.
Dim “A” Dim “B” Dim “C” Set Weight* Set Weight*
Model mm mm mm dry kg wet kg
C1400 D5 5105 2000 2238 9099 10075
C1675 D5 5690 2033 2330 10324 10626
C1675 D5A 5690 2033 2330 10324 10626
C1250 D6 5105 2000 2238 9009 10075
C1500D6 5690 2033 2330 10024 10326
* Note: Weights represent a set with standard features. See outline drawings for weights of other configurations.
Codes and standards

This generator set is designed in facilities All enclosed products are designed to meet
certified to ISO 9001 and manufactured in 2000/14/EC or exceed EU noise legislation 2000/14/EC
facilities certified to ISO 9001 or ISO 9002. step 2006.
This generator set is available with CE This generator set has been designed to
certification.
ISO 8528 comply with ISO 8528 regulation.
Cummins Power Generation
Europe, CIS, Middle East and Africa Americas Asia Pacific

rd
Manston Park Columbus Ave. 1400 73 Avenue N.E. 10 Toh Guan Road #07-01
Manston, Ramsgate Minneapolis, MN 55432 USA TT International Tradepark
Kent CT12 5BF United Kingdom Phone 763 574 5000 Singapore 608838
Phone 44 1843 255000 Fax 763 574 5298 Phone 65 6417 2388
Fax 44 1843 255902 Fax 65 6417 2399
©2013 Cummins Power Generation Inc. All rights reserved.

Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, AmpSentry, InPower
and “Our energy working for you.” are trademarks of Cummins Power Generation. Other company, product, or service names
may be trademarks or service marks of others. Specifications are subject to change without notice.
SS16-CPGK-RevB (1/13) cumminspower.com
ϴ. $OWHUQDWRUVHWVKHHW
PI734D - Winding 312
Technical Data Sheet

APPROVED DOCUMENT
PI734D
SPECIFICATIONS & OPTIONS
STANDARDS TERMINALS & TERMINAL BOX
Stamford industrial generators meet the requirements of BS Standard generators feature a main stator with 6 ends
EN 60034 and the relevant sections of other national and brought out to the terminals, which are mounted on the
international standards such as BS5000, VDE 0530, NEMA frame at the non-drive end of the generator. A sheet steel
MG1-32, IEC60034, CSA C22.2-100, AS1359. terminal box contains the AVR and provides ample space
Other standards and certifications can be considered on for the customers' wiring and gland arrangements. It has
request. removable panels for easy access.
DESCRIPTION SHAFT & KEYS

The STAMFORD PI range of synchronous ac generators are All generator rotors are dynamically balanced to better
brushless with a rotating field. They are separately excited than BS6861:Part 1 Grade 2.5 for minimum vibration in
by the STAMFORD Permanent Magnet Generator (PMG). operation. Two bearing generators are balanced with a
This is a shaft mounted, high frequency, pilot exciter which half key.
provides a constant supply of clean power via the Automatic
Voltage Regulator (AVR) to the main exciter. The main INSULATION/IMPREGNATION
exciter output is fed to the main rotor, through a full wave The insulation system is class 'H', and meets the
bridge rectifier, protected by surge suppression. requirements of UL1446.
All wound components are impregnated with materials
VOLTAGE REGULATORS and processes designed specifically to provide the high
APPROVED DOCUMENT
The PI range generators, complete with a PMG, are available build required for static windings and the high mechanical
with one of two AVRs. Each AVR has soft start voltage build strength required for rotating components.
up and built in protection against sustained over-excitation,
which will de-excite the generator after a minimum of 8 QUALITY ASSURANCE
seconds. Generators are manufactured using production
Underspeed protection (UFRO) is also provided on both procedures having a quality assurance level to
AVRs. The UFRO will reduce the generator output voltage BS EN ISO 9001.
proportional to the speed of the generator below a pre-
settable level. NOTE ON REGULATION
The stated voltage regulation may not be maintained in
The MX341 AVR is two phase sensed with a voltage the presence of certain radio transmitted signals. Any
regulation of ± 1 %. (see the note on regulation). change in performance will fall within the limits of Criteria
'B' of EN 61000-6-2:2001. At no time will the steady-state
The MX321 AVR is 3 phase rms sensed with a voltage voltage regulation exceed 2%.
regulation of 0.5% rms (see the note on regulation). The
UFRO circuit has adjustable slope and dwell for controlled DE RATES
recovery from step loads. An over voltage protection circuit All values tabulated on page 8 are subject to the following
will shutdown the output device of the AVR, it can also trip an reductions
optional excitation circuit breaker if required. As an option,
short circuit current limiting is available with the addition of 5% when air inlet filters are fitted.
current transformers. 10% when IP44 Filters are fitted.
3% for every 500 metres by which the operating altitude
Both the MX341 and the MX321 need a generator mounted exceeds 1000 metres above mean sea level.
current transformer to provide quadrature droop 3% for every 5°C by which the operational ambient
characteristics for load sharing during parallel operation. temperature exceeds 40°C.
Provision is also made for the connection of the STAMFORD
power factor controller, for embedded applications, and a Note: Requirement for operating in an ambient
remote voltage trimmer. temperature exceeding 60°C must be referred to the
factory.
WINDINGS & ELECTRICAL PERFORMANCE
All generator stators are wound to 2/3 pitch. This eliminates
triplen (3rd, 9th, 15th …) harmonics on the voltage waveform
and is found to be the optimum design for trouble-free supply
of non-linear loads. The 2/3 pitch design avoids excessive
neutral currents sometimes seen with higher winding pitches. Note: Continuous development of our products entitles us to
A fully connected damper winding reduces oscillations during change specification details without notice, therefore they must
paralleling. This winding, with the 2/3 pitch and carefully not be regarded as binding.
selected pole and tooth designs, ensures very low levels of
voltage waveform distortion. Front cover drawing is typical of the product range.
2
PI734D
WINDING 312
CONTROL SYSTEM SEPARATELY EXCITED BY P.M.G.
A.V.R. MX341 MX321
VOLTAGE REGULATION ±1% ± 0.5 % With 4% ENGINE GOVERNING
SUSTAINED SHORT CIRCUIT REFER TO SHORT CIRCUIT DECREMENT CURVES (page 7)
INSULATION SYSTEM CLASS H
PROTECTION IP23
RATED POWER FACTOR 0.8
STATOR WINDING DOUBLE LAYER LAP
WINDING PITCH TWO THIRDS
WINDING LEADS 6
MAIN STATOR RESISTANCE 0.00114 Ohms PER PHASE AT 22°C STAR CONNECTED
MAIN ROTOR RESISTANCE

APPROVED DOCUMENT 1.98 Ohms at 22°C
EXCITER STATOR RESISTANCE 17.5 Ohms at 22°C
EXCITER ROTOR RESISTANCE 0.063 Ohms PER PHASE AT 22°C
R.F.I. SUPPRESSION BS EN 61000-6-2 & BS EN 61000-6-4,VDE 0875G, VDE 0875N. refer to factory for others
WAVEFORM DISTORTION NO LOAD < 1.5% NON-DISTORTING BALANCED LINEAR LOAD < 5.0%
MAXIMUM OVERSPEED 2250 Rev/Min
BEARING DRIVE END BALL. 6228 C3
BEARING NON-DRIVE END BALL. 6319 C3
1 BEARING 2 BEARING
WEIGHT COMP. GENERATOR 3318 kg 3267 kg
WEIGHT WOUND STATOR 1619 kg 1619 kg
WEIGHT WOUND ROTOR 1383 kg 1321 kg

2
WR² INERTIA 41.2206 kgm 40.2197 kgm2
SHIPPING WEIGHTS in a crate 3391kg 3336kg
PACKING CRATE SIZE 216 x 105 x 154(cm) 216 x 105 x 154(cm)
50 Hz 60 Hz
TELEPHONE INTERFERENCE THF<2% TIF<50
COOLING AIR 2.69 m³/sec 5700 cfm 3.45 m³/sec 7300 cfm
VOLTAGE STAR 380/220 400/231 415/240 440/254 416/240 440/254 460/266 480/277
kVA BASE RATING FOR REACTANCE
1615 1650 1650 1620 1815 1935 1975 2015
VALUES
Xd DIR. AXIS SYNCHRONOUS 3.12 2.88 2.67 2.33 3.75 3.57 3.33 3.12
X'd DIR. AXIS TRANSIENT 0.19 0.18 0.16 0.14 0.23 0.22 0.20 0.19
X''d DIR. AXIS SUBTRANSIENT 0.14 0.13 0.12 0.11 0.17 0.16 0.15 0.14
Xq QUAD. AXIS REACTANCE 2.01 1.85 1.72 1.50 2.41 2.30 2.15 2.01
X''q QUAD. AXIS SUBTRANSIENT 0.28 0.26 0.24 0.21 0.34 0.32 0.30 0.28
XL LEAKAGE REACTANCE 0.04 0.03 0.03 0.03 0.04 0.04 0.04 0.04
X2 NEGATIVE SEQUENCE 0.20 0.18 0.17 0.15 0.24 0.23 0.21 0.20
X0 ZERO SEQUENCE 0.02 0.02 0.02 0.02 0.03 0.03 0.03 0.02
REACTANCES ARE SATURATED VALUES ARE PER UNIT AT RATING AND VOLTAGE INDICATED
T'd TRANSIENT TIME CONST. 0.137s
T''d SUB-TRANSTIME CONST. 0.01s
T'do O.C. FIELD TIME CONST. 2.25s
Ta ARMATURE TIME CONST. 0.02s
SHORT CIRCUIT RATIO 1/Xd
3
PI734D
50 Winding 312
Hz THREE PHASE EFFICIENCY CURVES
APPROVED DOCUMENT
4
PI734D
Winding 312
Locked Rotor Motor Starting Curve

50
30
Hz 346V 380V 400V 415V 440V
25
.
20
PER CENT TRANSIENT VOLTAGE DIP
15 APPROVED DOCUMENT
10
0
0 500 1000 1500 2000 2500 3000 3500 4000
LOCKED ROTOR kVA
60
Hz 380V 416V 440V 460V 480V
30
25
.
20
PER CENT TRANSIENT VOLTAGE DIP
15
10
0
0 500 1000 1500 2000 2500 3000 3500 4000 4500
LOCKED ROTOR kVA
6
PI734D
Winding 312
Three-phase Short Circuit Decrement Curve. No-load Excitation at Rated Speed
Based on star (wye) connection.
50
Hz 100000
SYMMETRICAL
ASYMMETRICAL
CU RR E NT (Am p s)
10000
APPROVED DOCUMENT
1000
0.001 0.01 0.1 1 10
TIME (secs)
Sustained Short Circuit = 5,750 Amps
60 100000
Hz
SYMMETRICAL
ASYMMETRICAL
CU RR E NT (Am p s)
10000
1000
0.001 0.01 0.1 1 10
TIME (secs)
Sustained Short Circuit = 6,500 Amps

Note 1 Note 2
The following multiplication factors should be The following multiplication factor should be used to convert the
used to adjust the values from curve between values calculated in accordance with NOTE 1 to those applicable
time 0.001 seconds and the minimum current to the various types of short circuit :
point in respect of nominal operating voltage :
50Hz 60Hz 3-phase 2-phase L-L 1-phase L-N
Voltage Factor Voltage Factor Instantaneous x 1.00 x 0.87 x 1.30
380v x 1.00 416v x 1.00 Minimum x 1.00 x 1.80 x 3.20
400v x 1.05 440v x 1.06 Sustained x 1.00 x 1.50 x 2.50
415v x 1.09 460v x 1.10 Max. sustained duration 10 sec. 5 sec. 2 sec.
440v x 1.16 480v x 1.15 All other times are unchanged
The sustained current value is constant irrespective
of voltage level
Note 3
Curves are drawn for Star (Wye) connected machines.
7
PI734D
Winding 312 / 0.8 Power Factor
RATINGS
Class - Temp Rise Cont. F - 105/40°C Cont. H - 125/40°C Standby - 150/40°C Standby - 163/27°C
50Hz Star (V) 380 400 415 440 380 400 415 440 380 400 415 440 380 400 415 440
kVA 1500 1540 1540 1505 1615 1650 1650 1620 1675 1720 1720 1685 1715 1770 1770 1735
kW 1200 1232 1232 1204 1292 1320 1320 1296 1340 1376 1376 1348 1372 1416 1416 1388
Efficiency (%) 96.2 96.3 96.4 96.5 96.1 96.2 96.3 96.4 96.0 96.1 96.2 96.3 95.9 96.0 96.1 96.3
kW Input 1247 1279 1278 1248 1344 1372 1371 1344 1396 1432 1430 1400 1431 1475 1473 1441
60Hz Star (V) 416 440 460 480 416 440 460
APPROVED DOCUMENT 480 416 440 460 480 416 440 460 480
kVA 1690 1800 1840 1875 1815 1935 1975 2015 1890 2015 2055 2100 1940 2070 2115 2160
kW 1352 1440 1472 1500 1452 1548 1580 1612 1512 1612 1644 1680 1552 1656 1692 1728
Efficiency (%) 96.2 96.2 96.3 96.4 96.1 96.1 96.2 96.3 96.0 96.0 96.1 96.2 95.9 96.0 96.1 96.1
kW Input 1405 1497 1529 1556 1511 1611 1642 1674 1575 1679 1711 1746 1618 1725 1761 1798
DIMENSIONS
8
APPROVED DOCUMENT
Head Office Address:

Barnack Road, Stamford
Lincolnshire, PE9 2NB
United Kingdom
Tel: +44 (0) 1780 484000
Fax: +44 (0) 1780 484100
www.cumminsgeneratortechnologies.com
Copyright 2010, Cummins Generator Technologies Ltd, All Rights Reserved

Stamford and AvK are registered trade marks of Cummins Generator Technologies Ltd
Cummins and the Cummins logo are registered trade marks of Cummins Inc.
PI7D-312-TD-EN-SG-A
ϵ. &RQWUROOHUGDWDVKHHW
6SHFLILFDWLRQVKHHW
PowerCommand®
3.3 control system
Control system description Features

The PowerCommand control system is a • 320 x 240 pixels graphic LED backlight LCD.
microprocessor-based genset monitoring, metering • Multiple language support.
and control system designed to meet the demands of • AmpSentry™ protection - for true alternator
today’s engine driven gensets. The integration of all overcurrent protection.
control functions into a single control system provides • Digital power transfer control (AMF) provides load
enhanced reliability and performance, compared to transfer operation in open transition, closed
conventional genset control systems. These control transition, or soft (ramping) transfer modes.
systems have been designed and tested to meet the
harsh environment in which gensets are typically • Extended paralleling (peak shave/base load)
applied. regulates the genset real and reactive power output
while paralleled to the utility. Power can be
regulated at either the genset or utility Bus
monitoring point.
• Digital frequency synchronization and voltage
matching.
• Isochronous load share
• Droop kW and kVAr control
• Real time clock for fault and event time stamping.
• Exerciser clock and time of day start/stop initiate a
test with or without load, or a base load or peak
shave session.
• Digital voltage regulation. Three phase full wave
FET type regulator compatible with either shunt or
PMG systems.
• Digital engine speed governing (where applicable)
• Generator set monitoring and protection.
• Utility/AC Bus metering and protection
• 12 and 24 V DC battery operation.
• ModBus® interface for interconnecting to customer
equipment.
• Warranty and service. Backed by a comprehensive
warranty and worldwide distributor service network.
• Certifications - Suitable for use on gensets that are
designed, manufactured, tested and certified to
relevant UL, NFPA, ISO, IEC, Mil Std. and CE
standards.
power.cummins.com
©2018 Cummins Inc. | S-1570 (08/18)
• Exerciser clock and time of day start/stop initiate a test
PowerCommand digital with or without load, or a base load or peak shave
genset control session.
• Digital power transfer control (AMF) provides load transfer
PCC 3300 operation in open transition, closed transition, or soft
(ramping) transfer modes.
• Extended paralleling (peak shave/base load) regulates the
genset real and reactive power output while paralleled to
the utility. Power can be regulated at either the genset or
utility bus monitoring point.
• Digital frequency synchronization and voltage matching.
• Isochronous load share
• Droop kW and KVAr control
• Sync cCheck – The sync check function has adjustments
Description for phase angle window, voltage window, frequency
The PowerCommand genset control is suitable for use on a window and time delay.
wide range of diesel and lean burn natural gas gensets in • Utility/AC Bus metering and protection
paralleling applications. The PowerCommand control is • Advanced serviceability – using InPower™, a PC-based
compatible with shunt or PMG excitation style. It is suitable software service tool.
for use with reconnectable or non-reconnectable
generators, and it can be configured for any frequency, • Environmental protection – The control system is
voltage and power connection from 120-600 VAC line- designed for reliable operation in harsh environments.
toline, 601-45,000 VAC with external PT. • The main control board is a fully encapsulated module
Power for this control system is derived from the genset that is protected from the elements.
starting batteries. The control functions over a voltage range • ModBus interface for interconnecting to customer
from 8 VDC to 30 VDC. equipment.
Features • Configurable inputs and outputs – Four discrete inputs
and four dry contact relay outputs.
• 12 and 24 VDC battery operation.
• Warranty and service – Backed by a comprehensive
• Digital voltage regulation - Three phase full wave FET
warranty and worldwide distributor service network.
type regulator compatible with either shunt or PMG
systems. Sensing is three phase. • Certifications – Suitable for use on gensets that are
designed, manufactured, tested and certified to relevant
• Digital engine speed governing (where applicable) -
UL, NFPA, ISO, IEC, Mil Std. and CE standards.
Provides isochronous frequency regulation.
• Full authority engine communications (where applicable) - Base control functions
Provides communication and control with the Engine
HMI capability
Control Module (ECM).
• AmpSentry protection - for true alternator overcurrent Options – Local and remote HMI options.
protection. Operator adjustments – The HMI includes provisions for
• Genset monitoring - Monitors status of all critical engine many set up and adjustment functions.
and alternator functions. Genset hardware data – Access to the control and software
part number, genset rating in kVA and genset model
• Digital genset metering (AC and DC). number is provided from the HMI or InPower.
• Genset battery monitoring system to sense and warn Data logs – Includes engine run time, controller on time,
against a weak battery condition. number of start attempts, total kilowatt hours, and load
• Configurable for single or three phase AC metering. profile. (Control logs data indicating the operating hours at
• Engine starting - Includes relay drivers for starter, Fuel percent of rated kW load, in 5% increments. The data is
Shut Off (FSO), glow plug/spark ignition power and switch presented on the operation panel based on total operating
hours on the generator).
B+ applications.
Fault history – Provides a record of the most recent fault
• Genset protection – Protects engine and alternator. conditions with control date and time stamp. Up to 32
• Real time clock for fault and event time stamping. events are stored in the control non-volatile memory.
power.cummins.com
©2018 Cummins Inc. | S-1570 (08/18)
Alternator data - Spark advance (up to 18 cylinders)
- Voltage (single or three phase line-to-line and line-to- - Knock count (up to 18 cylinders)
neutral) - Auxiliary supply disconnector status
- Current (single or three phase) - Engine heater status
- kW, kVAr, power factor, kVA (three phase and total) - Coolant circulating pump status
- Frequency - Lube oil priming pump status
For Lean burn natural gas engine applications: - Lube oil status
- Alternator heater status - Oil heater status
- Alternator winding temperature (per phase) - Derate authorization status
- Alternator drive end bearing temperature - Start system status
- Alternator non-drive end bearing temperature - Ventilator fan status
- Ventilation louvre status
Utility/AC Bus data
- Radiator fan status
- Voltage (three phase line-to-line and line-to-neutral)
- DC PSU status
- Current (three phase and total)
- Start inhibit/enable status and setup
- kW, kVAr, power factor, kVA (three phase and total)
Service adjustments – The HMI includes provisions for
- Frequency adjustment and calibration of genset control functions.
Engine data Adjustments are protected by a password. Functions
include:
- Starting battery voltage - Engine speed governor adjustments
- Engine speed - Voltage regulation adjustments
- Engine temperature - Cycle cranking
- Engine oil pressure - Configurable fault set up
- Engine oil temperature - Configurable input and output set up
- Intake manifold temperature - Meter calibration
- Coolant temperature - Paralleling setup
- Comprehensive Full Authority Engine (FAE) data - Display language and units of measurement
(where applicable)
Engine control
For lean burn natural gas engine applications:
SAE-J1939 CAN interface to full authority ECMs (where
- Safety shutoff valve status
applicable). Provides data transfer between genset and
- Valve proving status engine controller for control, metering and diagnostics. 12
- Downstream gas pressure VDC/24 VDC battery operations - PowerCommand will
- Gas inlet pressure operate either on 12 VDC or 24 VDC batteries.
Temperature dependent governing dynamics (with
- Gas mass flow rate
electronic governing) - modifies the engine governing
- Control valve position control parameters as a function of engine temperature.
- Gas outlet pressure This allows the engine to be more responsive when warm
- Manifold pressure and more stable when operating at lower temperature
levels.
- Manifold temperature
Isochronous governing - (where applicable) Capable of
- Throttle position controlling engine speed within +/-0.25% for any steady
- Compressor outlet pressure state load from no load to full load. Frequency drift will
- Turbo speed not exceed +/-0.5% for a 33 °C (60 °F) change in ambient
temperature over an 8 hour period.
- Compressor bypass position
Droop electronic speed governing - Control can be
- Cylinder configuration (e.g., drive end and non-drive adjusted to droop from 0 to 10% from no load to full load.
end configurations
Remote start mode - It accepts a ground signal from
- Coolant pressure 1 and 2 (e.g., HT and LT) remote devices to automatically start the genset and
- Coolant temperature 1 and 2 (e.g., HT and LT) immediately accelerates to rated speed and voltage or
- Exhaust port temperature (up to 18 cylinders) run at idle until engine temperature is adequate. The
remote start signal will also wake up the control from
- Pre-filter oil pressure sleep mode. The control can incorporate a time delay
- Exhaust back pressure start and stop.
- CM700 internal temperature
- CM700 isolated battery voltage
- Speed bias
- CM558 internal temperature
- CM558 isolated battery voltage
- Knock level (up to 18 cylinders)
power.cummins.com
©2018 Cummins Inc. | S-1570 (08/18)
Remote and local emergency stop - The control accepts Paralleling functions
a ground signal from a local (genset mounted) or remote
(facility mounted) emergency stop switch to cause the First Start SensorTM system – PowerCommand
genset to immediately shut down. The genset is provides a unique control function that positively prevents
prevented from running or cranking with the switch multiple gensets from simultaneously closing to an
engaged. If in sleep mode, activation of either emergency isolated bus under black start conditions. The First Start
stop switch will wake up the control. Sensor system is a communication system between the
gensets that allows the gensets to work together to
Sleep mode - The control includes a configurable low
determine which genset is a system should be the first to
current draw state to minimize starting battery current
close to the bus. The system includes an independent
draw when the genset is not operating. The control can
backup function, so that if the primary system is disabled
also be configured to go into a low current state while in
the required functions are still performed.
auto for prime applications or applications without a
battery charger. Synchronizing – Control incorporates a digital
synchronizing function to force the genset to match the
Engine starting - The control system supports automatic
frequency, phase and voltage of another source such as
engine starting. Primary and backup start disconnects are
a utility grid. The synchronizer includes provisions to
achieved by one of two methods: magnetic pickup or
provide proper operation even with highly distorted bus
main alternator output frequency. The control also
voltage waveforms. The synchronizer can match other
supports configurable glow plug control when applicable.
sources over a range of 60-110% of nominal voltage and
Cycle cranking - Is configurable for the number of starting -24 to +6 Hz. The synchronizer function is configurable
cycles (1 to 7) and duration of crank and rest periods. for slip frequency synchronizing for applications requiring
Control includes starter protection algorithms to prevent a known direction of power flow at instant of breaker
the operator from specifying a starting sequence that closure or for applications where phase synchronization
might be damaging. performance is otherwise inadequate.
Time delay start and stop (cooldown) - Configurable for Load sharing control – The genset control includes an
time delay of 0-300 seconds prior to starting after integrated load sharing control system for both real (kW)
receiving a remote start signal and for time delay of 0-600 and reactive (kVar) loads when the genset(s) are
seconds prior to shut down after signal to stop in normal operating on an isolated bus. The control system
operation modes. Default for both time delay periods is 0 determines kW load on the engine and kVar load on the
seconds. alternator as a percent of genset capacity, and then
For lean burn natural gas engine applications: regulates fuel and excitation systems to maintain system
and genset at the same percent of load without impacting
Engine start inhibit/enable – The function will allow voltage or frequency regulation. The control can also be
application-specific processes to be started prior to the configured for operation in droop mode for kW or Kvar
genset/engine start (e.g., pumps, boosters, etc.). load sharing.
Alternator control Load govern control – When PowerCommand receives
a signal indicating that the genset is paralleled with an
The control includes an integrated three phase line-to-line infinite source such as a utility (mains) service, the
sensing voltage regulation system that is compatible with genset will operate in load govern mode. In this mode the
shunt or PMG excitation systems. The voltage regulation genset will synchronize and close to the bus, ramp to a
system is a three phase full wave rectified and has an pre-programmed kW and kVar load level, and then
FET output for good motor starting capability. Major operate at that point. Control is adjustable for kW values
system features include: from 0- 100% of Standby rating, and 0.7-1.0 power factor
Digital output voltage regulation - Capable of regulating (lagging). Default setting is 80% of Standby and 1.0
output voltage to within +/-1.0% for any loads between no power factor. The control includes inputs to allow
load and full load. Voltage drift will not exceed +/-1.5% for independent control of kW and kVar load level by a
a 40 ºC remote device while in the load govern mode. The rate of
(104 ºF) change in temperature in an eight hour period. load increase and decrease is also adjustable in the
On engine starting or sudden load acceptance, voltage is control. In addition, the control can be configured for
controlled to a maximum of 5% overshoot over nominal operation in kW or kVAr load govern droop.
level. Load demand control – The control system includes the
The automatic voltage regulator feature can be disabled ability to respond to an external signal to initiate load
to allow the use of an external voltage regulator. demand operation. On command, the genset will ramp to
Droop voltage regulation - Control can be adjusted to no load, open its paralleling breaker, cool down, and shut
droop from 0-10% from no load to full load. down. On removal of the command, the genset will
immediately start, synchronize, connect, and ramp to its
Torque-matched V/Hz overload control - The voltage roll-
share of the total load on the system.
off set point and rate of decay (i.e. the slope of the V/Hz
curve) is adjustable in the control. Sync check – The sync check function decides when
permissive conditions have been met to allow breaker
Fault current regulation - PowerCommand will regulate
closure. Adjustable criteria are: phase difference from
the output current on any phase to a maximum of three
0.1-20 deg, frequency difference from 0.001-1.0 Hz,
times rated current under fault conditions for both single
voltage difference from 0.5-10%, and a dwell time from
phase and three phase faults. In conjunction with a
0.5-5.0 sec. Internally the sync check is used to perform
permanent magnet generator, it will provide three times
closed transition operations. An external sync check
rated current on all phases for motor starting and short
output is also available.
circuit coordination purpose.
power.cummins.com
©2018 Cummins Inc. | S-1570 (08/18)
Genset and utility/AC Bus source AC metering – Extended paralleling – In extended paralleling mode (when
The control provides comprehensive three phase AC enabled) the controller will start the genset and parallel to a
metering functions for both monitored sources, utility source and then govern the real and reactive power
including: output of the genset based on the desired control point. The
3-phase voltage (L-L and L-N) and current, control point for the real power (kW) can be configured for
frequency, phase rotation, individual phase and either the genset metering point ("base load") or the utility
totalized values of kW, kVAr, kVA and Power Factor; metering point ("peak shave"). The control point for the
totalized positive and negative kW-hours, kVAr-hours, reactive power (kVAr or Power Factor) can also be
and kVA-hours. Three wire or four wire voltage independently configured for either the genset metering point
connection with direct sensing of voltages to 600V, or the utility metering point. This flexibility would allow base
and up to 45kV with external transformers. Current kW load from the genset while maintaining the utility power
sensing is accomplished with either 5 amp or 1 CT factor at a reasonable value to avoid penalties due to low
secondaries and with up to 10,000 amp primary. power factor. The System always operates within genset
Maximum power readings are 32,000kW/kVAR/kVA. ratings. The control point can be changed while the system is
Power transfer control – provides integrated in operation. Set points can be adjusted via hardwired analog
automatic power transfer functions including source input or adjusted through an operator panel display or service
availability sensing, genset start/stop and transfer tool.
pair monitoring and control. The transfer/retransfer is Exerciser clock –The exerciser clock (when enabled) allows
configurable for open transition, fast closed transition the system to be operated at preset times in either test
(less than 100msec interconnect time), or soft closed without load, test with load, or extended parallel mode. A real
transition (load ramping) sequences of operation. time clock is built in. Up to 12 different programs can be set
Utility source failure will automatically start genset for day of week, time of day, duration, repeat interval, and
and transfer load, retransferring when utility source mode. For example, a test with load for 1 hour every Tuesday
returns. Test will start gensets and transfer load if test at 2AM can be programmed. Up to 6 different exceptions can
with load is enabled. Sensors and timers include: also be set up to block a program from running during a
Under voltage sensor: 3-phase L-N or L-L under specific date and time period.
voltage sensing adjustable for pickup from 85-100% Application types – Controller is configured to operating in
of nominal. Dropout adjustable from 75-98% of one of six possible application types. These topologies are
pickup. Dropout delay adjustable from 0.1-30 sec. often used in combinations in larger systems, with
Over voltage sensor: 3-phase L-N or L-L over voltage coordination of the controllers in the system either by external
sensing adjustable for pickup from 95-99% of device or by interlocks provided in the control. Topologies
dropout. Dropout adjustable from 105-135% of that may be selected in the control include:
nominal. Dropout delay adjustable from 0.5-120 sec. Standalone: Control provides monitoring, protection and
Standard configuration is disabled, and is control in a non-paralleling application.
configurable to enabled in the field using the HMI or
InPower service tools.
Over/Under frequency sensor: Center frequency
adjustable from 45-65 Hz. Dropout bandwidth
adjustable from 0.3-5% of center frequency beyond
pickup bandwidth. Pickup bandwidth adjustable from
0.3-20% of center frequency. Field configurable to
enable.
Loss of phase sensor: Detects out of range voltage
phase angle relationship. Field configurable to
enable.
Phase rotation sensor: Checks for valid phase Synchronizer only: control will synchronize the genset to
rotation of source. Field configurable to enable. other source when commanded to either via a hardwired or
Breaker tripped: If the breaker tripped input is active, Modbus driven input.
the associated source will be considered as
unavailable.
Timers: Control provides adjustable start delay from
0- 300 sec, stop delay from 0-800 sec, transfer delay
from
0- 120 sec, retransfer delay from 0-1800 sec,
programmed transition delay from 0-60sec, and
maximum parallel time from 0-1800 sec.
Breaker control – Utility and genset breaker
interfaces include separate relays for opening and
closing breaker, as well as inputs for both 'a' and 'b'
breaker position contacts and tripped status. Breaker
diagnostics include contact failure, fail to close, fail to
open, fail to disconnect, and tripped. Upon breaker
failure, appropriate control action is taken to maintain
system integrity.
power.cummins.com
©2018 Cummins Inc. | S-1570 (08/18)
Isolated Bus: allows the genset to perform a dead bus closure Power transfer control: control operates a single
or synchronize to the bus and isochronously share kW and genset/single utility transfer pair in open transition,
kVAR loads with other gensets. fast closed transition, or soft closed transition.
Extended paralleling functionality also provides base
load and peak shave options.
Utility single: Control monitors one genset and utility. The

control will automatically start and provide power to a load if Protective functions
the utility fails. The control will also resynchronize the genset
On operation of a protective function the control will
back to the utility and provides extended paralleling
indicate a fault by illuminating the appropriate status
capabilities.
LED on the HMI, as well as display the fault code and
fault description on the LCD. The nature of the fault
and time of occurrence are logged in the control. The
service manual and InPower service tool provide
service keys and procedures based on the service
codes provided.
Protective functions include:
Battle short mode
When enabled and the battle short switch is active,
the control will allow some shutdown faults to be
bypassed. If a bypassed shutdown fault occurs, the
fault code and description will still be annunciated,
but the genset will not shutdown. This will be followed
by a fail to shutdown fault. Emergency stop
shutdowns and others that are critical for proper
operation (or are handled by the engine ECM) are not
bypassed. Please refer to the control application
guide or manual for list of these faults.
Utility multiple: Supports all functionality of Isolated Bus and
provides extended paralleling to the utility. Extended Derate
paralleling load set points follow a constant setting;
dynamically follow an analog input, ModBus register or HMI. The derate function reduces output power of the
genset in response to a fault condition. If a derate
command occurs while operating on an isolated bus,
the control will issue commands to reduce the load
on the genset via contact closures or ModBus. If a
derate command occurs while in utility parallel mode,
the control will actively reduce power by lowering the
base load kW to the derated target kW.
Configurable alarm and status inputs
The control accepts up to four alarm or status inputs
(configurable contact closed to ground or open) to
indicate a configurable (customer-specified)
condition. The control is programmable for warning,
derate, shutdown, shutdown with cooldown or status
indication and for labeling the input.
Emergency stop
Annunciated whenever either emergency stop signal
is received from external switch.
power.cummins.com
©2018 Cummins Inc. | S-1570 (08/18)
General engine protection Alternator protection
Low and high battery voltage warning - Indicates status AmpSentry protective relay - A comprehensive monitoring
of battery charging system (failure) by continuously and control system integral to the PowerCommand Control
monitoring battery voltage. System that guards the electrical integrity of the alternator
Weak battery warning - The control system will test the and power system by providing protection against a wide
battery each time the genset is signaled to start and array of fault conditions in the genset or in the load. It also
indicate a warning if the battery indicates impending provides single and three phase fault current regulation so
failure. that downstream protective devices have the maximum
Fail to start (overcrank) shutdown - The control system current available to quickly clear fault conditions without
will indicate a fault if the genset fails to start by the subjecting the alternator to potentially catastrophic failure
completion of the engine crack sequence. conditions. See document R1053 for a full size time over
current curve. The control does not included protection
Fail to crank shutdown - Control has signaled starter to required for interconnection to a utility (mains) service.
crank engine but engine does not rotate.
Cranking lockout - The control will not allow the starter
to attempt to engage or to crank the engine when the
engine is rotating.
Fault simulation –The control in conjunction with
InPower software, will accept commands to allow a
technician to verify the proper operation of the control
and its interface by simulating failure modes or by
forcing the control to operate outside of its normal
operating ranges. InPower also provides a complete list
of faults and settings for the protective functions
provided by the controller.
Off load running (protection) – This feature protects the
engine in the event the genset is being called to go off
load for too long.
Hydro mechanical fuel system engine
protection
Overspeed shutdown – Default setting is 115% of
nominal Low lube oil pressure warning/shutdown –
Level is preset (configurable with InPower or HMI) to
match the capabilities of the engine used. Control
includes time delays to prevent nuisance alarms.
High lube oil temperature warning/shutdown – Level is
preset (configurable with InPower or HMI) to match the High AC voltage shutdown (59) - Output voltage on any
capabilities of the engine used. Control includes time phase exceeds preset values. Time to trip is inversely
delays to prevent nuisance alarms. proportional to amount above threshold. Values adjustable
High engine temperature warning/shutdown – Level is from 105-125% of nominal voltage, with time delay
preset (configurable with InPower or HMI) to match the adjustable from 0.1-10 seconds. Default value is 110% for
capabilities of the engine used. Control includes time 10 seconds.
delays to prevent nuisance alarms. Low AC voltage shutdown (27) - Voltage on any phase has
Low coolant temperature warning – Indicates that dropped below a preset value. Adjustable over a range of
engine temperature may not be high enough for a 10 50-95% of reference voltage, time delay 2-20 seconds.
second start or proper load acceptance. Default value is 85% for 10 seconds. Function tracks
reference voltage. Control does not nuisance trip when
Low coolant temperature warning – Can be set up to
voltage varies due to the control directing voltage to drop,
be a warning or shutdown.
such as during a V/Hz roll-off or synchronizing.
High intake manifold temperature shutdown – Level is Under frequency shutdown (81 u) - Genset output
preset (configurable with InPower or HMI) to match the frequency cannot be maintained. Settings are adjustable
capabilities of the engine used. Control includes time
from 2-10 Hz below reference governor set point, for a 5-
delays to prevent nuisance alarms.
20 second time delay. Default: 6 Hz, 10 seconds. Under
Full authority electronic engine protection frequency protection is disabled when excitation is switched
off, such as when engine is operating in idle speed mode.
Engine fault detection is handled inside the engine
ECM. Fault information is communicated via the SAE-
J1939 data link for annunciation in the HMI.
power.cummins.com
©2018 Cummins Inc. | S-1570 (08/18)
Over frequency shutdown/warning (81o) - Genset is Fail to disconnect warning: In the controller is unable to
operating at a potentially damaging frequency level. open either breaker, a fail to disconnect warning is
Settings are adjustable from 2-10 Hz above nominal initiated. Typically this would be mapped to a configurable
governor set point for a 1-20 second time delay. Default: output, allowing an external device to trip a breaker.
6 Hz, 20 seconds, disabled. Fail to synchronize warning: Indicates that the genset
Overcurrent warning/shutdown (51) - Implementation of could not be brought to synchronization with the bus.
the thermal damage curve with instantaneous trip level Configurable for adjustable time delay of 10 -900
calculated based on current transformer ratio and seconds, 120 default.
application power rating. Phase sequence sensing warning: Verifies that the
Loss of sensing voltage shutdown - Shutdown of genset genset phase sequence matches the bus prior to allowing
will occur on loss of voltage sensing inputs to the control. the paralleling breaker to close.
Field overload shutdown - Monitors field voltage to Maximum parallel time warning (power transfer control
shutdown genset when a field overload condition occurs. mode only): During closed transition load transfers,
Over load (kW) warning - Provides a warning indication control independently monitors paralleled time. If time is
when engine is operating at a load level over a set point. exceeded, warning is initiated and genset is
Adjustment range: 80-140% of application rated kW, 0- disconnected.
120 second delay. Defaults: 105%, 60 seconds. Bus or genset PT input calibration warning: The control
Reverse power shutdown (32) - Adjustment range: 5- system monitors the sensed voltage from the bus and
20% of Standby kW rating, delay 1-15 seconds. Default: genset output voltage potential transformers. When the
10%, 3 seconds. paralleling breaker is closed, it will indicate a warning
Reverse Var shutdown - Shutdown level is adjustable: condition if the read values are different.
15- 50% of rated Var output, delay 10-60 seconds. Field control interface
Default: 20%, 10 seconds.
Short circuit protection - Output current on any phase is Input signals to the PowerCommand control
more than 175% of rating and approaching the thermal include:
damage point of the alternator. Control includes - Coolant level (where applicable)
algorithms to protect alternator from repeated over
current conditions over a short period of time. - Fuel level (where applicable)
Negative sequence overcurrent warning (46) – Control - Remote emergency stop
protects the generator from damage due to excessive - Remote fault reset
imbalances in the three phase load currents and/or - Remote start
power factors.
- Rupture basin
Custom overcurrent warning/shutdown (51) – Control
provides the ability to have a custom time overcurrent - Start type signal
protection curve in addition to the AmpSentry protective - Battle short
relay function. - Load demand stop
Ground fault overcurrent (51G) – Control detects a - Synchronize enable
ground fault either by an external ground fault relay via a
contact input or the control can measure the ground - Genset circuit breaker inhibit
current from an external current transformer. Associated - Utility circuit breaker inhibit
time delays and thresholds are adjustable via InPower or - Single mode verify
HMI.
- Transfer inhibit – prevent transfer to utility (in power
Paralleling protection transfer control mode)
- Retransfer inhibit – prevent retransfer to genset (in
Breaker fail to close warning: When the control signals a
power transfer control mode)
circuit breaker to close, it will monitor the breaker
auxiliary contacts and verify that the breaker has closed. - kW and kVAr load setpoints
If the control does not sense a breaker closure within an - Configurable inputs - Control includes (4) input signals
adjustable time period after the close signal, the fail to from customer discrete devices that are configurable for
close warning will be initiated. warning, shutdown or status indication, as well as
Breaker fail to open warning: The control system message displayed
monitors the operation of breakers that have been
signalled to open. If the breaker does not open within and
adjustable time delay, a Breaker Fail to Open warning is - Gearbox oil pressure/temperature protection
initiated. - Fire fault
Breaker position contact warning: The controller will
- Earth fault
monitor both ‘a’ and ‘b’ position contacts from the
breaker. If the contacts disagree as to the breaker - Differential fault
position, the breaker position contact warning will be - DC power supply fault
initiated. - Genset Interface Box (GIB) isolator open fault
Breaker tripped warning: The control accepts inputs to - Start inhibit/enable (x3)
monitor breaker trip / bell alarm contact and will initiate a
breaker tripped warning if it should activate. - Radiator fan trip
power.cummins.com
©2018 Cummins Inc. | S-1570 (08/18)
- Ventilator fan trip Mechanical drawing
- Ventilation louvers closed
- Start system trip
- Alternator heater trip
- Alternator heater status
- Alternator winding temperature (PT100 RTDx3)
- Alternator drive end bearing temperature (PT100
RTD)
- Alternator non-drive end bearing temperature
(PT100 RTD)
Output signals from the PowerCommand
control include:
- Load dump signal: Operates when the genset is in
an overload condition.
- Delayed off signal: Time delay based output which
will continue to remain active after the control has
removed the run command. Adjustment range: 0 -
120 seconds.
Default: 0 seconds.
- Configurable relay outputs: Control includes (4) relay
output contacts (3 A, 30 VDC). These outputs can
be configured to activate on any control warning or
shutdown fault as well as ready to load, not in auto,
common alarm, common warning and common
shutdown.
- Ready to load (genset running) signal: Operates
when the genset has reached 90% of rated speed
and voltage and latches until genset is switched to
off or idle mode.
- Paralleling circuit breaker relays outputs: Control
includes (4) relay output contacts (3.5 A, 30 VDC)
for opening and closing of the genset and utility
breakers.
- Start inhibit/enable event
- Emergency stop event
- Ventilator fan run control
- Louvre control
- Radiator fan control
- Alternator heater control
- Engine at idle speed event
Communications connections include:
- PC tool interface: This RS-485 communication port
allows the control to communicate with a personal
computer running InPower software.
- ModBus RS-485 port: Allows the control to
communicate with external devices such as PLCs
using ModBus protocol.
Note - An RS-232 or USB to RS-485 converter is
required for communication between PC and control.
- Networking: This RS-485 communication port allows
connection from the control to the other Cummins
products.
power.cummins.com
©2018 Cummins Inc. | S-1570 (08/18)
• Six tactile feel membrane switches dedicated to control for
PowerCommand Human auto, stop, manual, manual start, fault reset and lamp
Machine Interface test/panel lamps.
• Two tactile feel membrane switches dedicated to control of
HMI320 circuit breaker (where applicable).
• Allows for complete genset control setup.
• Certifications: Suitable for use on gensets that are
designed, manufactured, tested and certified to relevant
UL, NFPA, ISO, IEC, Mil Std. and CE standards.
• LCD languages supported: English, Spanish, French,
German, Italian, Greek, Dutch, Portuguese, Finnish,
Norwegian, Danish, Russian and Chinese characters.
Communications connections include:
- PC tool interface - This RS-485 communication port allows
Description the HMI to communicate with a personal computer running
This control system includes an intuitive operator InPower.
interface panel that allows for complete genset control - This RS-485 communication port allows the HMI to
as well as system metering, fault annunciation, communicate with the main control board.
configuration and diagnostics. The interface includes
five genset status LED lamps with both internationally Mechanical drawing
accepted symbols and English text to comply with
customer’s needs. The interface also includes an LED
backlit LCD display with tactile feel soft-switches for
easy operation and screen navigation. It is
configurable for units of measurement and has
adjustable screen contrast and brightness.
The run/off/auto switch function is integrated into the
interface panel.
All data on the control can be viewed by scrolling
through screens with the navigation keys. The control
displays the current active fault and a time-ordered
history of the five previous faults.
Features
• LED indicating lamps:
• Genset running
• Remote start
• Not in auto
• Shutdown
• Warning
• Auto
• Manual and stop
• Circuit breaker open (if equipped)
• Circuit breaker closed (if equipped)
• 320 x 240 pixels graphic LED backlight LCD.
• Four tactile feel membrane switches for LCD defined
operation. The functions of these switches are
defined dynamically on the LCD.
• Seven tactile feel membrane switches dedicated
screen navigation buttons for up, down, left, right,
ok, home and cancel.
power.cummins.com
©2018 Cummins Inc. | S-1570 (08/18)
Software Warranty
InPower (beyond 6.5 version) is a PC-based software All components and subsystems are covered by an express
service tool that is designed to directly communicate to limited one year warranty. Other optional and extended
PowerCommand gensets and transfer switches, to facilitate factory warranties and local distributor maintenance
service and monitoring of these products. agreements are available.
Environment
The control is designed for proper operation without
recalibration in ambient temperatures from -40 ºC (-40 ºF)
to +70 ºC (158 ºF), and for storage from -55 ºC (-67 ºF) to
+80 ºC (176 ºF). Control will operate with humidity up to
95%, non-condensing.
The HMI is designed for proper operation in ambient
temperatures from -20 ºC (-4 ºF) to +70 ºC (158 ºF), and
for storage from -30 ºC (-22 ºF) to +80 ºC (176 ºF).
The control board is fully encapsulated to provide superior
resistance to dust and moisture. Display panel has a single
membrane surface, which is impervious to effects of dust,
moisture, oil and exhaust fumes. This panel uses a sealed
membrane to provide long reliable service life in harsh
environments.
The control system is specifically designed and tested for
resistance to RFI/EMI and to resist effects of vibration to
provide a long reliable life when mounted on a genset. The
control includes transient voltage surge suppression to
provide compliance to referenced standards.
Certifications
PowerCommand meets or exceeds the requirements of the
following codes and standards:
- NFPA 110 for level 1 and 2 systems.
- ISO 8528-4: 1993 compliance, controls and switchgear.
- CE marking: The control system is suitable for use on
generator sets to be CE-marked.
- EN 50081-1,2 residential/light industrial emissions or
industrial emissions.
- EN 50082-1,2 residential/light industrial or industrial
susceptibility.
- ISO 7637-2, level 2; DC supply surge voltage test.
- Mil Std 202C, Method 101 and ASTM B117: Salt fog test.
- UL 508 recognized or Listed and suitable for use on UL
2200 Listed generator sets.
- CSA C282-M1999 compliance
- CSA 22.2 No. 14 M91 industrial controls.
- PowerCommand control systems and generator sets are
designed and manufactured in ISO 9001 certified
facilities.
For more information contact your local Cummins distributor

or visit power.cummins.com
©2018 Cummins Inc. All rights reserved. Cummins is a registered trademark of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks of
Cummins Inc. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice.
S-1570 (08/18)
Specification Sheet
PowerCommand®
Digital Master
Controller 2000
Description Features
The PowerCommand Digital Master Control is a Color touch-screen: 7-inch color display with
microprocessor-based paralleling system product 800x480, 16-bit color graphics
designed to directly interface with Cummins Power Supports four system topologies:
Generation PowerCommand paralleling generator Configurable for isolated bus, isolated bus with
sets and switchgear. The DMC 2000 is designed for generator main, single utility common bus and
use in low or medium voltage isolated bus (not utility single utility transfer pair.
paralleled) and infinite bus (utility paralleled) Standard generator set interface: Includes
applications. interface for four generator sets with optional
add-on for up to eight generator sets.
The DMC 2000 provides flexibility to meet specific Trending (real-time and historical): Collects
application requirements and is configurable via the and displays total kW, total kVAR, average amps
user-friendly touch-screen interface. The system and average voltage data from the generator bus
control has been extensively prototype tested to and utility bus (if applicable).
ensure optimum system reliability. True RMS bus metering: Full-function true RMS
bus AC metering (generator bus and utility bus).
Load Add / Shed sequence: Priority-based
sequence supporting up to 8 levels and 10 loads.
Load demand control system: Configurable to
fixed order or run hours.
Scheduler: Allow automatic operation of the
power system on a pre-defined schedule.
Product certification: CE, CSA 22.2, IBC,
IEC/EN61439-2:2011, IP40, OSHPD, UL891
Warranty and service: Products are backed by
a comprehensive warranty and a worldwide
network of distributors with factory-trained
service technicians.
©2020 Cummins Inc. | S-6512 PD00000384 (09/20) http://www.cummins.com

System Configuration
Isolated bus without generator main: Single transfer pair:
System consists of an isolated bus and may include a System consists of a breaker pair including a generator bus
generator set main breaker. The system controls main and a utility main. DMC 2000 controls both breakers
generator set main breaker as a programmable function of in open transition, fast closed transition or ramping closed
bus capacity when required. transition modes.
Isolated bus with generator main: Control Features

The control functions in the system is managed by
PowerCommand MCM3320 Control. It is a fully configurable,
microprocessor-based controller and provides all core system
functions in a flexible, reliable, prototype-tested configuration.
Control functions/features include:
Power transfer control: Provides integrated automatic

transfer functions including:
Source availability sensing
Generator set start/stop
Transfer pair monitoring and control
Sync check: Independently determines when permissive

System consists of an isolated bus resulting in load transfer conditions have been met to allow breaker closure. Adjustable
occurring at the load level. criteria include:
Phase difference: 0.1-20 degrees
Common bus:
Frequency difference: 0.001-1.0 Hz
Voltage difference: 0.5-10%
Dwell time: 0.5-5.0 seconds
Externall Sync Check connection available.
Dual source bus AC metering: Provides comprehensive 3-

phase AC metering functions for both monitored sources,
including:
3-phase voltage (L-L and L-N) and current
Frequency and phase rotation
Individual phase and totalized values of kW, kVAR, KVA,
and power factor
Totalized positive and negative kW hours, kVAR hours
System consists of a utility main breaker, but no generator
and kVA hours.
main breaker (only individual generator set paralleling
breakers). The system controls utility main breaker and
generator set paralleling breakers. Load add/shed: Controls and monitors up-to 10 loads for 8
step levels (such as feeder breaker or automatic transfer
switches) in any combination. Loads can be added as
generator sets come online, as well as on a timed basis.
Loads are shed on a timed basis when an overload condition
is detected, protecting system integrity. Shed loads can be
restored through operator action. Manual load-add and shed
is also provided. Load-add delay is adjustable from 1-60 sec.
Load-shed delay is adjustable from 1-10 sec.

Load demand: The Load Demand feature is used to match to operate outside of its normal operating ranges. InPower also
generating capacity to the load to optimize fuel efficiency and provides a complete list of faults and settings for the protective
prolong generator set life while maintaining correct reserve functions provided by the controller.
capacity for the customer’s application.
The function will support from two to eight generators. The
shutdown sequence is configurable as a fixed sequence or Protective Functions
running hours. Running hours method will attempt to equalize The control provides the following system protective functions
generator set hours over time by exchanging stopped and for each breaker or bus. Each protective function will cause the
running generator sets. To protect system integrity, load control to take intelligent corrective action to best resolve the
demand will restart all generator sets whenever an overload problem until an operator can address it.
condition is detected. The minimum amount of capacity to
maintain online is adjustable. Initial delay for load demand to Breaker fail-to-close warning: When the controller
begin operation is adjustable from 1 - 60 minutes. Shutdown signals a circuit breaker to close, it will monitor the breaker
threshold is adjustable from 20 - 100% of online capacity auxiliary contacts and verify that the breaker has closed.
minus one. Shutdown delay is adjustable from 1 - 60 minutes. If the control does not sense a breaker closure within an
Re-start threshold is adjustable from 20 - 100% of online adjustable time period after the close signal, the fail-to-
capacity. Run hours differential is adjustable from 1 - 500 close warning will be initiated. If the utility main breaker
hours. fails to close, the controller starts the generators and
transfers load to them until the operator resets the fault
Extended paralleling: Enables generator sets to start and condition and resolves the problem.
parallel to utility source, then governing the real and reactive Breaker position contact warning: The controller will
power output. The control point for the real power (kW) can monitor both A and B position contacts from the breaker.
be configured for either the generator set bus metering point If the contacts disagree as to the breaker position, the
(base-load) or the utility metering point (Peak-shave). The breaker position contact warning will be initiated.
control point for reactive power (kVAR or power factor) can Breaker fail-to-open warning: The control system
be independently configured for either the generator set bus monitors the operation of breakers that have been
metering point or the utility metering point. Allows base kW signalled to open. If the breaker does not open within an
load from the generator sets while maintaining the utility adjustable time delay, a breaker fails to open warning is
power factor at a reasonable value to avoid penalties due to initiated.
low power factor. The control point can be changed while the
Breaker tripped warning: The control accepts inputs to
system is in operation. Set points can be adjusted via
monitor breaker trip/bell alarm contact and will initiate a
operator panel display or service tool.
breaker tripped warning if it should activate.
Fail to synchronize warning: Indicates that the
Scheduler: Allows the system to be operated at pre-set generator bus could not be brought to synchronization
times in test without load, test with load or extended with the system bus. Configurable for adjustable time
parallel mode. With a real-time clock built-in, up to 12 delay of 10-120 seconds.
different programs can be set for day of week, time of day,
Bus overload warning: The control monitors bus
duration, repeat interval and mode. Up to six different
frequency and generator bus load relative to the online
exceptions can be set up to block a program from running
capacity. When configured, the control will initiate a bus
during a specific time-period.
overload warning if the bus kW load exceeds an
adjustable threshold (80 - 140%) for an adjustable delay
Breaker control: Utility main and generator set main (0 - 120 sec), or both.
breaker interfaces include separate relays for opening and Maximum parallel time warning: During closed
closing breaker, as well as inputs for both a and b breaker transition load transfers, the controller independently
position contacts and tripped status. Breaker diagnostics monitors the time the utility and generator sources are
include contact failure, fail-to-close, fail-to-open, and connected. If time is exceeded, warning is initiated, and
tripped. If a breaker fails, appropriate control action is the generator bus is disconnected.
taken to maintain system integrity (max 30 VDC, 10 amp,
or 250VAC, 10 amp).
When abnormal situations are detected by the control, it will
provide as much corrective action as possible to keep the
Voltage connection: DMC 2000 accepts three-wire or four- system operating.
wire voltage connection with direct sensing of voltage to 480V
Utility main breaker fail to close warning: Control will
and up to 35kV with external transformers. Current sensing is
start the gensets and transfer load to the genset bus and
accomplished with 5-amp CT secondary and up to 25,000
remain there until the operator resets the fault condition
amp primary.
and resolves the problem.
Generator set main breaker fail-to-close warning:
Neutral earth relay control: Used to restrict earth fault Returns to the utility source and will not retry until the
protection for multiple operating power generation operator resets the fault condition and resolves the
sources. This option provides control of the contactor in problem.
the neutral (neutral contactor) to earth of each generator.
Breaker position contact warning: Control will return to
Neutral contactors are interlocked so that only one
the utility source and will not retry until operator resets the
contactor can remain closed during parallel operation.
fault condition and resolve the issue.
During independent operation of any generator, its neutral
contactor will be closed. Fail to Synchronize warning: If the control is trying to
perform a closed transition retransfer, but fail to sync
occurs, the control can be configured to perform the
Fault simulation mode: The control, in conjunction with retransfer using open transition.
InPower™ software, will accept commands to allow a
technician to verify the proper operation of the control and its
interface by simulating failure modes or by forcing the control

Operator Panel System control
A 7-inch color high-resolution (800x480) touchscreen
operator interface panel (HMI) allows the operator to
monitor and control the onsite power system. The operator
panel provides the user with a complete package of easy-
to-view screens. Each screen includes navigation buttons
to allow quick access to other screens that are logically
connected with the screen being displayed. Access to
screens that impact system settings or sequence of
operations are controlled by a multi-level password
system. The HMI includes the following screens and/or
functions:
One-line diagram
The System control screen provides the operator with the
ability to enable or disable load demand operation, view timer
values and the load demand sequence; initiate test (with or
without load); control the shutdown sequence for the generator
sets in the load demand mode; set the load demand time
delays; set the load demand operation set points. The screen
also allows setting of the source availability settings and
sequence timing for power transfer. This screen is password-
protected to prevent access to the configuration functions by
unauthorized users.
Generator set status
The one-line diagram screen displays system status by a

combination of animation, changing screen color, and text
messages. Conditions visible on the screen include:
Generator set(s) and bus configuration with generator
set, paralleling breaker and bus energized/de-energized
indication (red indicating energized, green indicating de-
energized).
Generator set designation, with control data, and
performance summary screens accessible through hot
keys (links) located on the menu bar at the bottom of the
screen.
Generator set mode (run/off/auto).
Generator set status (normal / warning / shutdown / load The Generator Set Summary provides an analog and
demand stop). graphical display of critical generator set operating parameters.
Paralleling breaker status (open/closed/unknown). The screen includes generator set state display (stopped, time
Optional status and condition displays of other breakers delay start, idle speed state, rated volts/hertz, synchronizing,
and devices can be supplied where required. load share or load govern); analog AC metering for generator
Bus condition (energized or de-energized). Clicking on set (3-phase, AC volts and current, frequency. The screen
the AC Metering icon (located on the menu bar) provides provides a complete display engine and alternator data present
access to a bus AC data screen. in the generator set control. The screen also shows status of
the bus and generator set breaker.
For applications which include automatic transfer switches
(ATSs), the DMC provides a depiction of the ATS in the one-
line, indicating switch position. Detailed information for each
ATS in the system is also available from the ATS screen.

ATS summary Trending
The ATS Summary screen provides a summary of ATS The trending screen provides real-time trend charts for AC
operating parameters of all sources, load parameters along output parameters and continuously monitors average voltage,
with annunciator status. total kVAR, total kilowatts and average amperage. Scales of
values displayed are field configurable.
Load control
Trending properties:
Refresh rate: Every 15 seconds
Continuous scrolling (FIFO)
Time span: 26 days total historical data with 20-minute
view window
Maximum & minimum scale values selectable by operator
via HMI.
Network Connections
A standard register map of system data for use in monitoring
by a remote device is provided. A complete array of system
control, adjustments and monitoring data are available and are
The Load Control screen provides a digital display of system documented in a published register map. Available protocols
load as a percent of available capacity of the generator sets include:
that are operating in parallel on the bus. The screen provides Modbus TCP/IP
an alphanumeric display of this data. It also displays the
name, status and priority of each load block (whether on or
off). The screen allows the operator to manually add and shed Control Power
loads in any sequence desired. Control power for the system is derived from the generator set
24 VDC starting batteries. A solid-state, no-break, “best
System alarm/events battery” selector system is provided so that control voltage is
available as long as any generator set battery bank in the
system is available. All incoming battery banks are isolated to
prevent the failure of one battery bank from disabling entire
system. The core system control has redundant control power
inputs for added reliability, as well as separate high/low DC
voltage monitoring.
The PowerCommand control (on each generator set in the
system) continually monitors the battery charging system for
low and high DC voltage and runs a battery load test every
time the engine is stared. Functions and messages on the
generator paralleling control include:
Low DC voltage (battery voltage less than 24 VDC, except
during engine cranking).
The System Alarm/Events records the date, time and nature High DC voltage (battery voltage greater than 32 VDC)
of all alarm and shutdown conditions reported on the system.
The system logs include all alarms reported on the generator
set, all master controls and network connected functions.

Dimensional Drawings:
Environment
The control is designed for proper operation without
recalibration in ambient temperatures from 0 °C to +50 °C (32
°F to 122 °F) and for storage from -20 °C to +70 °C (-4 °F to
158 °F). Control will operate with humidity up to 95%, non-
condensing, and at altitudes up to 6,500 feet.
Software
WebAccessHMI
Unity
InPower is a PC-based software service tool designed to
directly communicate to PowerCommand products to
facilitate setup, service and monitoring of these products.
Certifications
DMC meets or exceeds the requirements of the following
codes and standards:
CSA22.2 No. 14-18 industrial controls
CE Marked
o LV Directive 2014/35/EU
o EMC Directive 2014/30/EU
o RoHS 2011/65/EU
o IEC/EN61439-2:2011
Eurocode 8 (seismic certification)
IBC - all risk categories I to IV structures, shake testing
qualified
IP40 Rated
NEMA1
OSPHD – all California building code risk category I to IV
structures, shake testing qualified
PowerCommand controls are suitable for use in
emergency, critical and standby applications as defined in
articles 700, 701 and 702.
PowerCommand control systems are designed and
manufactured in ISO9001-certified facilities.
DMC is capable of being installed in accordance to the

following codes & standards:
CSA C282:19 emergency electrical power supply for
building
NFPA70: U.S. national electrical code
NFPA99: standard for health care facilities
NFPA110 for level 1 systems
Warranty
As components of a Cummins system, PowerCommand®
controls are covered by a standard two-year limited warranty.
Warranty options are available; consult your local distributor.

Functions Circuit breakers
and characteristics
and switch-disconnectors
NW08 to NW63
&RPPRQFKDUDFWHULVWLFV
PB104423A35
Number of poles 3/4

Rated insulation voltage (V) 8L 1000/1250
Impulse withstand voltage (kV) 8LPS 12
Rated operational voltage (V AC 50/60 Hz) 8H 690/1150
Suitability for isolation IEC 60947-2
Degree of pollution IEC 60664-1 4 (1000 V) /3 (1250 V)
%DVLFFLUFXLWEUHDNHU
&LUFXLWEUHDNHUDVSHU,(&
Rated current (A) at 40 °C /50 °C
Rating of 4th pole (A)
Sensor ratings (A)
7\SHRIFLUFXLWEUHDNHU
PB104433A65
Ultimate breaking capacity (kA rms) ,FX 220/415/440 V

V AC 50/60 Hz 525 V
690 V
1150 V
Rated service breaking capacity (kA rms) ,FV % Icu
Utilisation category
Rated short-time withstand current (kA rms) ,FZ 1s
V AC 50/60 Hz 3s
Integrated instantaneous protection (kA peak ±10 %)
Rated making capacity (kA peak) ,FP 220/415/440 V
V AC 50/60 Hz 525 V
690 V
1150 V
Break time (ms) between tripping order and arc extinction
Closing time (ms)
&LUFXLWEUHDNHUDVSHU1(0$$%
Breaking capacity (kA) 240/480 V
V AC 50/60 Hz 600 V
8QSURWHFWHGFLUFXLWEUHDNHU
7ULSSLQJE\VKXQWWULSDVSHU,(&
Ultimate breaking capacity (kA rms) V AC 50/60 Hz ,FX 220...690 V
Rated service breaking capacity (kA rms) ,FV % Icu
3s
Overload and short-circuit protection
External protection relay: short-circuit protection, maximum delay: 350 ms
Rated making capacity (kA peak) V AC 50/60 Hz ,FP 220...690 V
6ZLWFKGLVFRQQHFWRUDVSHU,(&DQG$QQH[$
7\SHRIVZLWFKGLVFRQQHFWRU
Rated making capacity (kA peak) ,FP 220...690 V
$&$$&FDWHJRU\V AC 50/60 Hz 1150 V
$&$$&FDWHJRU\V AC 50/60 Hz 3s
(DUWKLQJVZLWFK
Latching capacity (kA peak) 135
Rating short time withstand (kA rms) ,FZ 1s 60 Hz
3s 50 Hz
0HFKDQLFDODQGHOHFWULFDOGXUDELOLW\DVSHU,(&DW,Q,H
Service life Mechanical with maintenance
C/O cycles x 1000 without maintenance
5DWHGFXUUHQW ,Q$
C/O cycles x 1000 Electrical without maintenance 440 V
IEC 60947-2 690 V
1150 V
7\SH RIFLUFXLWEUHDNHURUVZLWFKGLVFRQQHFWRU
5DWHGRSHUDWLRQDOFXUUHQW ,H$ $&$
&UHDUYHUWLFDOFRQQHFWHG5HIHUWRWHPSHUDWXUH C/O cycles x 1000 Electrical without maintenance 440 V
GHUDWLQJWDEOHVIRURWKHUFRQQHFWLRQW\SHV
IEC 60947-3 690 V
6HHWKHFXUUHQWOLPLWLQJFXUYHVLQWKH³DGGLWLRQDO
FKDUDFWHULVWLFV´VHFWLRQ 7\SHRIFLUFXLWEUHDNHURUVZLWFKGLVFRQQHFWRU
(TXLSSHGZLWKDWULSXQLWZLWKDPDNLQJFXUUHQW 5DWHGRSHUDWLRQDOFXUUHQW ,H$ $&
RIN$SHDN Motor power 380/415 V (kW)
([WHUQDOSURWHFWLRQPXVWFRPSO\ZLWKSHUPLVVLEOHWKHUPDO 440 V (kW)
FRQVWUDLQWVRIWKHFLUFXLWEUHDNHUSOHDVHFRQVXOWXV 690 V (kW)
1RIDXOWWULSLQGLFDWLRQE\WKH6'(RUWKHUHVHWEXWWRQ
$YDLODEOHIRU91(0$ C/O cycles x 1000 Electrical without maintenance 440/690 V
6XLWDEOHIRUPRWRUFRQWUROGLUHFWRQOLQHVWDUWLQJ IEC 60947-3Annex M/IEC 60947-4-1
%DVHGRQ6FKQHLGHU/93('(1&DWDORJXH 3DJHRI

6HQVRUVHOHFWLRQ
6HQVRUUDWLQJ$
,UWKUHVKROGVHWWLQJ$
WR WR WR WR WR WR WR WR WR WR WR WR WR
)RUFLUFXLWEUHDNHU1: SOHDVHFRQVXOWXV
1: 1: 1: 1: 1: 1: 1: 1: 1:E 1: 1:

WR WR WR
WR WR WR WR WR WR WR WR
1 + + / + + + + / + + + + + + +

% % % %

+$ +) +$ +) +$ +) +$

1:1:1: 1: 1: 1:1:1: 1:E1:1:
1$ +$ +) +$ +$ +) +$ +$ +) +$ +$ +) +$ +$

1++ / + ++ + / + ++ + + + +
E

+++$+) ++++$+) ++++$+) +++$
E

+++$+) ++++$+)

WR WR WR WR WR
WR WR WR WR WR
WR WR WR WR


Functions Micrologic control units
and characteristics Overview of functions
$OO0DVWHUSDFWFLUFXLWEUHDNHUVDUHHTXLSSHGZLWKD 'HSHQGDELOLW\
0LFURORJLFFRQWUROXQLWWKDWFDQEHFKDQJHGRQVLWH ,QWHJUDWLRQRISURWHFWLRQIXQFWLRQVLQDQ$6,&HOHFWURQLFFRPSRQHQWXVHGLQDOO
&RQWUROXQLWVDUHGHVLJQHGWRSURWHFW3RZHUFLUFXLWV 0LFURORJLFFRQWUROXQLWVJXDUDQWHHVDKLJKGHJUHHRIUHOLDELOLW\DQGLPPXQLW\WR
DQGORDGV$ODUPVPD\EHSURJUDPPHGIRUUHPRWH FRQGXFWHGRUUDGLDWHGGLVWXUEDQFHV
LQGLFDWLRQV 2Q0LFURORJLF$3DQG+FRQWUROXQLWVDGYDQFHGIXQFWLRQVDUHPDQDJHGE\DQ
0HDVXUHPHQWVRIFXUUHQWYROWDJHIUHTXHQF\SRZHU LQGHSHQGHQWPLFURSURFHVVRU
DQGSRZHUTXDOLW\RSWLPLVHFRQWLQXLW\RIVHUYLFHDQG
HQHUJ\PDQDJHPHQW
$FFHVVRULHV
&HUWDLQIXQFWLRQVUHTXLUHWKHDGGLWLRQRI0LFURORJLFFRQWUROXQLWDFFHVVRULHV
GHVFULEHGRQSDJH$
7KHUXOHVJRYHUQLQJWKHYDULRXVSRVVLEOHFRPELQDWLRQVFDQEHIRXQGLQWKH
GRFXPHQWDWLRQDFFHVVLEOHYLDWKH3URGXFWVDQGVHUYLFHVPHQXRIWKH
ZZZVFKQHLGHUHOHFWULFFRPZHEVLWH
0LFURORJLFQDPHFRGHV &XUUHQWSURWHFWLRQ
0LFURORJLFEDVLFSURWHFWLRQ
$ 3URWHFWLRQ
'%
;<= ORQJWLPH
LQVWDQWDQHRXV
;W\SHRISURWHFWLRQ
IRUEDVLFSURWHFWLRQ
IRUVHOHFWLYHSURWHFWLRQ
IRUVHOHFWLYHHDUWKIDXOWSURWHFWLRQ
IRUVHOHFWLYHHDUWKOHDNDJHSURWHFWLRQ
<FRQWUROXQLWJHQHUDWLRQ
,GHQWL¿FDWLRQRIWKHFRQWUROXQLWJHQHUDWLRQ
³´VLJQL¿HVWKH¿UVWJHQHUDWLRQ 0LFURORJLFEDVLFSURWHFWLRQ
=W\SHRIPHDVXUHPHQW
3URWHFWLRQ
'%
$IRU³DPPHWHU´
ORQJWLPH
3IRU³SRZHUPHWHU´
VKRUWWLPH
+IRU³KDUPRQLFPHWHU´ LQVWDQWDQHRXV
0LFURORJLFVHOHFWLYHHDUWKIDXOWSURWHFWLRQ
3%
3URWHFWLRQ
'%
'%
ORQJWLPH
ORQJWLPH
VKRUWWLPH
LQVWDQWDQHRXV
HDUWKIDXOW
0LFURORJLFVHOHFWLYHHDUWKOHDNDJHSURWHFWLRQ
3URWHFWLRQ
'%
'%
ORQJWLPH
VKRUWWLPH
LQVWDQWDQHRXV
HDUWKOHDNDJHXSWR$

I1, I2, I3, IN, Iearth-fault, Iearth-leakage and maximeter for these measurements
fault indications
settings in amperes and in seconds.
measurements of V, A, W, VAR, VA, Wh, VARh, VAh, Hz, V peak, A peak, power factor and maximeters and minimeters
IDMTL long-time protection, minimum and maximum voltage and frequency, voltage and current imbalance,
phase sequence, reverse power
load shedding and reconnection depending on power or current
measurements of interrupted currents, differentiated fault indications, maintenance indications, event histories
and time-stamping, etc.
power quality: fundamentals, distortion, amplitude and phase of harmonics up to the

31st order
waveform capture after fault, alarm or on request
enhanced alarm programming: thresholds and actions.
DB101120
DB101122
DB101122
DB101121
DB101123
DB101124
DB101124
DB 0 12
01
DB101123
DB101124
DB101124
"LOKSET #UNSYSTÒMEPOURTOUTESVOSAPPLICATIONS
NÏCESSITANTUNHAUTNIVEAUDESßRETÏ
UNEGAMMECOMPLÒTE DISTRIBUTIONÏLECTRIQUECONTRÙLE COMMANDEMOTEUR
DETABLEAUX"4 #UNENSEMBLEËSTRUCTUREMODULAIRE
POURLARÏALISATIONDETABLEAUX"4CONÎUSURLABASE
POURRÏPONDREËLENSEMBLE DUNRESPECTDESCONTRAINTESHABITUDESETNORMESLOCALES
DEVOSEXIGENCES #UNENSEMBLEINTELLIGENT
PRÐTËINTÏGRERDESAPPAREILSEMBARQUANTDESFONCTIONS
DECOMMUNICATIONETDEPROTECTIONAVANCÏES
POURLADISTRIBUTIONETLACOMMANDEMOTEUR
"LOKSET #ASYSTEMFORALLYOURAPPLICATIONSREQUIRING
AHIGHLEVELOFDEPENDABILITY
ACOMPLETERANGE ELECTRICALDISTRIBUTIONANDMOTORCONTROL
OF,6SWITCHBOARDS #AMODULARSTRUCTURE
FORLOW VOLTAGESWITCHBOARDSDESIGNEDTOMEETLOCAL
TOMEETALLYOURNEEDS STANDARDSPRACTICESANDREQUIREMENTS
#!NINTELLIGENTSYSTEM
READYTOINTEGRATEDEVICESCONTAININGADVANCED
PROTECTIONANDCOMMUNICATIONFUNCTIONS
FORELECTRICALDISTRIBUTIONANDMOTORCONTROL
3CHNEIDER%LECTRIC

$ESCRIPTIONETCARACTÏRISTIQUESSUITE
$ESCRIPTIONANDCHARACTERISTICSCONT
,ENVELOPPE
3UIVANTLINDICEDEPROTECTIONDÏSIRÏLOSSATUREREÎOITDIFFÏRENTSTYPESDHABILLAGES
%NCLOSURE
$EPENDINGONTHEDEGREEOFPROTECTIONREQUIREDTHEFRAMEMAYBElTTED
WITHDIFFERENTCOVERPANELS
(ABILLAGE#OVERPANELS )NDICEDEPROTECTION$EGREEOFPROTECTION
)0 )0 )0 )0
&ACEAVANT&RONT
0ORTEPLEINE0LAINDOOR # # # #
0ORTETRANSPARENTE4RANSPARENTDOOR # # # #
0ORTEPOURCOMMANDEROTATIVEEXTERNE # # # #
$OORFOREXTERNALROTARYHANDLE
0ORTE-ASTERPACT-ASTERPACTDOOR # # # #
0ORTE-ASTERPACTAVECCAPOTTRANSPARENT # # # #
-ASTERPACTDOORWITHTRANSPARENTCOVER
"ANDEAUXSUPÏRIEURETINFÏRIEURPERFORÏS # # # #
0ERFORATEDUPPERANDLOWERPANELS
&ACEARRIÒRE2EAR
0ANNEAUARRIÒRE"ACKPANEL # # # #
0ARTIESUPÏRIEURE4OP
4OIT4OPCOVER # # # #
0LAQUEPASSE CÉBLE#ABLEGLANDPLATE # # # #
0ARTIEINFÏRIEURE"OTTOM
0LAQUEPASSE CÉBLE#ABLEGLANDPLATE # # # #
$%
4ABLEAUTYPE$£QUIP£DEPORTES 4ABLEAUTYPE$£QUIP£DUNEPORTE 4ABLEAUTYPE-FMOTEURCLOISONN£ 4ABLEAUTYPE-WMOTEUR£QUIP£DE

PLEINESETDUNEPORTE-ASTERPACT TRANSPARENTE AVECPORTESINDIVIDUELLESPOUR PORTESPOURCOMMANDESROTATIVES
4YPE$SWITCHBOARDWITHPLAIN 4YPE$SWITCHBOARDWITHTRANSPARENT COMMANDESDIRECTESOUROTATIVES 4YPE-WMOTOR CONTROLCENTREWITH
DOORSAND-ASTERPACTDOOR DOOR 4YPE-FMOTOR CONTROLECENTRE DOORSFORROTARYHANDLES
PARTITIONEDWITHINDIVIDUALDOORS
FORDIRECTCONTROLSORROTARYHANDLES
3CHNEIDER%LECTRIC

0%
,ADISPOSITIONDESCELLULES
,AMODULARITÏDUTABLEAU"LOKSETPERMETDIFFÏRENTSTYPESDINSTALLATIONSADAPTÏS
ËLACONlGURATIONDESSALLESÏLECTRIQUES
#LESCELLULESPEUVENTÐTREMONTÏESCÙTEËCÙTEOUDOSËDOS
5SUIVANTLASURFACEAUSOLDISPONIBLELEMONTAGEDESCELLULESDOSËDOSPERMET
DEDIVISERPARDEUXLALONGUEURTOTALEDUTABLEAU
#LACCÒSAUXZONESDERACCORDEMENTPEUTSEFFECTUERPARLAVANTOUPARLARRIÒRE
DELACELLULE
5SILESBORNESDERACCORDEMENTSONTPLACÏESËLINTÏRIEURDUNEOSSATURELATÏRALE
LACCÒSESTRÏALISÏPARLAVANTDELACELLULE#EMONTAGEPERMETDEPLACERLETABLEAU
CONTRELEMUR
0%
5SILESBORNESDERACCORDEMENTSONTPLACÏESDERRIÒRELAPPAREILLAGELACCÒSEST
RÏALISÏPARLARRIÒREDELACELLULE
#LARRIVÏEDESCÉBLESDALIMENTATIONDELARMOIREOULESDÏPARTSPEUVENTSEFFECTUER
PARLEHAUTOUPARLEBASDESCELLULES
5SILESCELLULESSONTMONTÏESSURUNFAUXPLANCHEROUUNCANIVEAULESARRIVÏES
OULESDÏPARTSSONTRÏALISÏSDEPRÏFÏRENCEPARLEBAS
#LALIMENTATIONDUTABLEAUPEUTAUSSISEFAIREPARLINTERMÏDIAIREDECANALISATIONS
ÏLECTRIQUESPRÏFABRIQUÏESPARLEHAUTDESCELLULES
,AYOUTOFTHECOLUMNS
"LOKSETMODULARDESIGNMAKESITPOSSIBLETOMATCHTHESWITCHBOARDLAYOUT
TOTHECONlGURATIONOFTHEELECTRICALROOM
#COLUMNSMAYBEPOSITIONEDSIDE BY SIDEORBACK TO BACK
$%
5DEPENDINGONTHESPACEAVAILABLEINTHEROOMBACK TO BACKINSTALLATIONMEANS

THETOTALLENGTHOFTHESWITCHBOARDCANBEDIVIDEDBYTWO
#ACCESSTOCONNECTIONZONESISPOSSIBLETHROUGHTHEFRONTORTHEBACKOFEACH
COLUMN
5IFTHECONNECTIONTERMINALSARELOCATEDINSIDEASIDECOMPARTMENTACCESSIS
THROUGHTHEFRONTMAKINGITPOSSIBLETOPOSITIONTHESWITCHBOARDAGAINSTAWALL
5IFTHECONNECTIONTERMINALSARELOCATEDBEHINDSWITCHGEARCOMPONENTSACCESSIS
THROUGHTHEBACKOFTHECOLUMN
#INCOMINGOROUTGOINGCABLESMAYENTERTHROUGHTHETOPORTHEBOTTOMOFCOLUMNS
5IFTHECOLUMNSAREINSTALLEDONAFALSEmOORORABOVEATRENCHITISPREFERABLE
TORUNTHECABLESTHROUGHTHEBOTTOM
#THESWITCHBOARDMAYALSOBESUPPLIEDBYBUSWAYSTHROUGHTHETOPOFTHECOLUMNS
3CHNEIDER%LECTRIC

#ONFORMITÏAUXNORMES #ARACTÏRISTIQUESGÏNÏRALES
#OMPLIANCETOSTANDARDS 'ENERALCHARACTERISTICS
#ONFORMITÏAUXNORMESINTERNATIONALES#OMPLIANCEWITHINTERNATIONALSTANDARDS
%NSEMBLEDESÏRIE )%# 6$%PART
4YPETESTEDASSEMBLIES $). "3%.
0HÏNOMÒNESTELLURIQUES 5NIFORM"UILDING#ODE
3ISMICWITHSTAND #ALIFORNIA"UILDING#ODE
4ENUEARCINTERNE !3
)NTERNALARCWITHSTAND
#ARACTÏRISTIQUESÏLECTRIQUES%LECTRICAL#HARACTERISTICS
4ENSIONASSIGNÏEDISOLEMENT 6!#
2ATEDINSULATIONVOLTAGE
4ENSIONASSIGNÏEDEMPLOI 6!#
2ATEDOPERATIONALVOLTAGE
4ENSIONASSIGNÏEDETENUEAUXCHOCS K6
2ATEDIMPULSEWITHSTANDVOLTAGE
#LASSIlCATIONDESURTENSION )6
/VERVOLTAGECATEGORY
$EGRÏDEPOLLUTION
$EGREEOFPOLLUTION
&RÏQUENCE JUSQUË(Z
&REQUENCY UPTO(Z
#OURANTNOMINALJEUDEBARRESPRINCIPAL-AINBUSBARSRATEDCURRENT
*EUDEBARRESPRINCIPAL 3IMPLEJEUDEBARRES $OUBLEJEUDEBARRES
-AINBUSBARS 3INGLEBUSBARS $OUBLEBUSBARS
#OURANTASSIGNÏ JUSQUË! JUSQUË!
2ATEDCURRENT UPTO! UPTO!
#OURANTASSIGNÏDECRÐTEADMISSIBLE ORK! K!
2ATEDPEAKWITHSTANDCURRENT
#OURANTASSIGNÏDECOURTEDURÏE ORK!RMSS K!RMSS
2ATEDSHORT TIMECURRENT
2EVÐTEMENT3URFACE0ROTECTION
2EVÐTEMENTDESSURFACESEXTÏRIEURES 0OUDREÏPOXYPOLYMÏRISÏEËHAUTETEMPÏRATURE
%XTERNALSURFACEPROTECTION %POXYPOWDERPOLYMERISEDATHIGHTEMPERATURE
#OULEURSSTANDARD 2!,GRISCLAIR 2!,GRISGRAPHITE
3TANDARDCOLORS 2!,GREYISHWHITE 2!,GRAPHITEGREY
)MPOSSIBLEENCOLONNEDETYPE$C
)MPOSSIBLEIN$CTYPECUBICLE
3CHNEIDER%LECTRIC

$ESCRIPTIONETCARACTÏRISTIQUESSUITE
$ESCRIPTIONANDCHARACTERISTICSCONT
!PPLICATIONSPOURDISTRIBUTIONETCOMPENSATIONDÏNERGIERÏACTIVE
!PPLICATIONSFORDISTRIBUTIONANDPOWERFACTORCORRECTION
2ÏFÏRENCEETTYPE $ $C #
2EFERENCEANDTYPE 4YPE 4YPE 4YPE
&ONCTIONNALIT£ !RMOIREDEDISTRIBUTION !RMOIRECOMPENSATIONFACTEUR #OFFRETMURAL
&UNCTIONALITY $ISTRIBUTIONCUBICLE DEPUISSANCE 7ALL MOUNTEDCABINET
0OWERFACTORCORRECTIONCUBICLE
*EUDEBARRESDISTRIBUTIONVERTICAL $ISTRIBUTIONBUSBARSVERTICAL
#OURANTASSIGNÏ JUSQU@Ë! n !
2ATEDCURRENT UPTO!
#OURANTASSIGNÏDECRÐTEADMISSIBLE ORK! n ORK!
#OURANTASSIGNÏDECOURTEDURÏE ORK!RMSS n ORK!RMSS
$ÏPART/UTGOING
$ÏPARTMOTEURS-OTORFEEDERS n n n
$ÏPARTDISTRIBUTION JUSQUË! n JUSQUË!
$ISTRIBUTIONFEEDERS UPTO! UPTO!
#ARACTÏRISTIQUESMÏCANIQUES-ECHANICALCHARACTERISTICS
(AUTEURHORSTOUT4OTALHEIGHT MM MM ORMM
(AUTEURUTILISABLEMODULEMM MODULES MODULES MODULES
5SABLEHEIGHTMODULEMM
,ARGEUR7IDTH MM MM
ORMM
0ROFONDEUR$EPTH ORMM ORMM ORMM
4YPEDUNITÏFONCTIONNELLE DE&&&Ë777 &&& &&&
&UNCTIONALUNITTYPE &&&TO777
&ORMESSUIVANTLANORME)%# BB
B
&ORMSACCORDINGTO)%#
$EGRÏSDEPROTECTIONSUIVANTLANORME)%# )0
)0 )0
$EGREEOFPROTECTIONACCORDINGTO)%#
!PPLICATIONSPOURCONTRÙLEMOTEURS
!PPLICATIONSFORMOTORCONTROL
2ÏFÏRENCEETTYPE -F -W -S
2EFERENCEANDTYPE 4YPE 4YPE 4YPE
&ONCTIONNALIT£ !RMOIRED£PARTSMOTEURlXES !RMOIRED£PARTSMOTEUR !RMOIREVARIATEURSDE
&UNCTIONALITY &IXED TYPE-OTOR#ONTROL D£BROCHABLES VITESSEETD£MARREURS
#ENTER-## CUBICLE 7ITHDRAWABLE TYPE-OTOR PROGRESSIFS
#ONTROL#ENTER-## CUBICLE 6ARIABLESPEEDDRIVESAND
SOFTSTARTERSCUBICLE
*EUDEBARRESDISTRIBUTION$ISTRIBUTIONBUSBARS
#OURANTASSIGNÏ JUSQUË! ! JUSQUË!
2ATEDCURRENT UPTO! UPTO!
#OURANTASSIGNÏDECRÐTEADMISSIBLE ORK! K! ORK!
#OURANTASSIGNÏDECOURTEDURÏE ORK!RMSS K!RMSS ORK!RMSS
$ÏPART/UTGOING
$ÏPARTMOTEURS JUSQUËK7 JUSQUËK7 JUSQUËK7
-OTORFEEDERS UPTOK7 UPTOK7 UPTOK7
$ÏPARTDISTRIBUTION IDEMTYPE$ JUSQUË! n
$ISTRIBUTIONFEEDERS UPTO!
#ARACTÏRISTIQUESMÏCANIQUES-ECHANICAL#HARACTERISTICS
(AUTEURHORSTOUT4OTALHEIGHT
(AUTEURUTILISABLEMODULEMM MODULES TIROIRSDEMODULES MODULES
5SABLEHEIGHTMODULEMM DRAWERSOFMODULES
,ARGEUR7IDTH ORMM ORMM ORMM
0ROFONDEUR$EPTH ORMM ORMM ORMM
4YPEDUNITÏFONCTIONNELLE&UNCTIONALUNITTYPE &&& 777 &&&
&ORMESSUIVANTLANORME)%# BB B BB
&ORMSACCORDINGTO)%#
$EGRÏSDEPROTECTIONSUIVANTLANORME)%# )0 )0 )0
$EGREEOFPROTECTIONACCORDINGTO)%#
3CHNEIDER%LECTRIC

ϭϬ. Battery & battery charger

!

"

#

$%&

#

#'$()$*+', -(-%.

/

#

/
&

#
!#

/
&

.(0# & 1

&

! #

#

!
! #

"

&

&

&

2

3 +
# 4
!
!

#

"

#
5

&

&

6

+

!
4
2
! ! !3 &

&6
& 4
6
7

!
#

" #
&&
5

!

&

" "

8 #!

&
&
" "

!

#

$

4%(
9
%(

4:

9 +$

;
45
)(0

&

#-

#

48

<

+

45

&

=

24%( 9:( 3

2>!>5+>3
,

+#

/ ?2/
?#3

"%
& '

(&
/
#

8

#
$
"
$(%-:
..

)
'
()
?1

8

!#$.

" #&&

$(.):
@%

* '
(*
/
#

&

8

!#
.
"
$$@*(
@$

!41

#4

" #

8

/

&

'
+
#

,
#

H
I

J&

,
2,?/
3
$
"
8#

D

$(
(% :2%(
$((
3
+ #

(@ : %: #
(% : 6%:
,

/
&

!
#

D
*

8
&D
$@(BC >+>5
$@%BC >
8

D$%
E&D
$@:$G(BC >+>5
$@G$G(BC >
D(% :

*

$@.A$:(BC
2

#
3
E<
&

F$.
2&
#

3

%

34

34

"

.

"

"
01 2 # / .

5

&
- *

>$( $( $@:
%%) *- @- 5- $ $((
>$% $% $:(
>$- $- %%) *- -$ $)( 5- % $.(
>%( %( %.) $.@ @@ %$: 5- . $@(
>%@ %@ .%(
>.( .( %*) $.@ :) .:: 5$( @ %((
>.: .: .G(
>@( @( @:(
>@: @: .G@ $.@ :) @*( 5$( @ %((
>:( :( :((
>:G :G -.(
>-. -. -:(
>-) -) .G@ $.@ G@ -G( 5$( : @%(
>G- G- -*(
>*( *( -*:
>*: *: )@(
>)@ )@ )G(
>$(( $(( .)$ $.@ $($ )*( %65$( - :*(
>$$( $$( $(%
>$%( $%( $(:
>$.( $.( $%:
>$@( $@( $.(

@$G $:) $(- %65$( G G@(
>$@: $@: $.%
>$:: $:: $.-
>$-( $-( $@%
>$G( $G( $@:

@$G $:) $.* %65$( G )-(
>$*( $*( $@)
>$)( $)( $:%
>%$( %$( %((
>%.( %.( %(*
>%@( %@( @@. $-. $-- %$- %K5$( * $%$(
>%:: %:: %%(
>%-: %-: %%@

$
"

%#'

0,%)*%%!7)72
87% 67%

87 67 :7 97 87 67 :7 97

- & - & - & - & - & - & - & - &
$+% %%% --* .%. G*. @%@ *)*
. .$* -G* @-G G). -$- )(* .$* $(G( @-G $.(( -$- $::(
@ .$* G%* @-G *@. -$- ):* .$* $%:( @-G $@:( -$- $G((
@ .$* *$. @-G )%* -$- $(@. .$* $@:( @-G $-G( -$- $)((
: .$* *$. @-G )%* -$- $(@. .$* $@:( @-G $-G( -$- $)((
- .$* *.( @-G )@: -$- $(-( .$* $:.- @-G $G*- -$- %(.-
G .G- *:- ::@ )G$ G.% $(*- .G- $-%@ ::@ $*.@ G.% %(G@
G .G- *:- ::@ )G$ G.% $(*- .G- $-%@ ::@ $*.@ G.% %(G@
* .G- **% ::@ ))G G.% $$$% .G- $-:( ::@ $*-( G.% %$((
2 3
7 %#*

L2K9$36
# $:

L2K9%36
# -*

=!KL
/&
4
$((
:

&

(&8;(&<; (&<1(&6=1

()8;()86; ()86<():>1
(*88(*86; (*8:1(*9<;

$
"%#

!*77%%( !*77%%(

6787%%( :787%%(

!*77%%( -,7%%(

9787%%( 6767%%(

-,7%%( -,7%%(

:767%%( 9767%%(

"

&
&
&
&

'%(((

)

!

"#

$%%

&$%

'%(((

)

!

"#

$%%

&$%
*
* '%(((

*
*

+'%(

)

!

"#

$%%

&$%

&$*
"
*4
<
$(!
7

!

:(((.@!/I!'J'
,4
D
M
###

&$*
4
G$%!
<! /(-(-G
###

,4
D
M

9$*-(%:G)*((

&$*!
"!/&
,
N%@
(*(:-O#

I

####
,
D M#
/D9@).G:.)()-:)G

8
6D9@).G:.)()-:))

®
DSE
DSE9460/9461
/9461 ENVIRONMENTAL TESTING STANDARDS
ELECTRO-MAGNETIC COMPATIBILITY
ENCLOSED INTELLIGENT
LIGENT BATTERY
BA
A CHARGER BS EN 61000-6-2
EMC Generic Immunity Standard for
5 AMP & 10 AMP, 12 VOLT & 24 VOLT OPTIONS the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for
the Industrial Environment
FEATURES
TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30 oC
The DSE94xx series of metal A comprehensive range of input and BS EN 60068-2-2
AVAILABLE 5 AMP VERSIONS Bb/Be Dry Heat +80 oC
enclosed intelligent battery chargers output protections ensures a * Refer to de-rating curve in the DSE9000
have been developed with safety, continued safe charging 9460-01 12v 5A (LCD) Operator Manual
9460-02 12v 5A (LCD & Meters)
usability, optimised battery environment also enabling the use of 9460-11 VIBRATION
24v 5A (LCD)
performance and maximum battery the charger as a power supply. 9460-12 24v 5A (LCD & Meters) BS EN 60068-2-6
lifetimes in mind. Higher charging / power supply Ten sweeps in each of three
major axes
currents can be achieved by linking 5 Hz to 8 Hz at +/-7.5 mm,
The DSE94xx series can be used together multiple chargers from this 8 Hz to 500 Hz at 2 gn
directly from the box, relying on a series. AVAILABLE 10 AMP VERSIONS
HUMIDITY
preconfigured lead/acid charging BS EN 60068-2-30
9461-01 12v 10A (LCD)
curve and selected manually for The chargers can be integrated into Db Damp Heat Cyclic 20/55 oC
9461-02 12v 10A (LCD & Meters) at 95% RH 48 Hours
either 12V or 24V operation an external system through modbus 9461-03 12v 10A (LED & Meters) BS EN 60068-2-78
(including a voltage trimming RTU using RS485 as well as an 9461-04 12v 10A (LED) Cab Damp Heat Static 40 oC
9461-11 (
24v 10A (LCD)) at 93% RH 48 Hours
potentiometer function). Alternatively optional external remote LCD 9461-12 24v 10A (LCD & Meters)
they can be connected via a USB to display being available. 9461-13 (
24v 10A (LED & Meters)) SHOCK
a PC (using the free DSE PC 9461-14 24v 10A (LED) BS EN 60068-2-27
Three shocks in each of three major axes
configuration suite software) and can 15 gn in 11 mS
be configured with pre set charging
curves for different battery types.
The user also has the option of
configuring their own bespoke
charging curve for advanced battery
applications.
COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OF

BATTERY CHARGER APPLICATIONS
' '%#$&'"! '%#$&
1ph
12V
N
CHARGE OUTPUT USB PORT RS485 AUXILIARY DC OUTPUT AC POWER SUPPLY
DSE9460/DSE9461

TEMPERATURE SENSOR CHANGE OVER VOLTS FREE FAULT CONFIGURABLE INPUT

RELAY
PT1000 ONLY
1 1
ISSUE 1
®
DSE
DSE9460/9461 SPECIFICATION
AC SUPPLY
ENCLOSED INTELLIGENT BATTERY CHARGER VOLTAGE RANGE

90 V to 305 V (L-N)
5 AMP & 10 AMP, 12 VOLT & 24 VOLT OPTIONS FREQUENCY RANGE
48 Hz to 64 Hz (L-N)
DC OUTPUT RATING
DSE9460 OUTPUT
FEATURES 5 A DC at 12 V & 24 V DC
DSE9461 OUTPUT
10 A DC at 12 V & 24 V DC
RIPPLE AND NOISE

ADVANCED FEATURES <1%
• Intelligent two, three and four stage charging EFFICIENCY
profiles >86%
• Configurable to suit most battery types
AUXILIARY OUTPUT
(12V/24V) 100 mA DC at 12 V
• Adjustable current limit
• Can be used as a battery charger, power supply REGULATION
LINE
or both at the same time <0.5%
• Automatic or Manual boost and storage charge
functions to help maintain battery condition LOAD
2%
• Digital Microprocessor Technology
• Temperature compensation for battery charging TEMPERATURE SENSOR INPUT
• Low Output Ripple and superb line regulation PT1000
• Available in two variants (LCD display or LCD PROTECTIONS

display & analogue meters) Short Circuit
DC Over Voltage
DC Over Current
• AC input Under voltage Reverse Polarity
• AC input Over voltage Over Temperature
AC Under & Over Voltage
• Battery charger output Over voltage Battery Charger Failure
• Battery charger output Over current
• Battery temperature compensation with over CHARGE FAILURE RELAY
3 A at 30 V DC volt free relay
temperature protection
• Output short circuit and Inversion polarity with DIMENSIONS
auto recovery OVERALL
165 mm x 305 mm x 110 mm
• Automatic power de-rating at high ambient 6.5” x 12” x 4.3”
temperatures
• Battery charger failure indication WEIGHT
KEY BENEFITS 2.3 kg

• Boosts and equalises cell charge improving • Fully flexible to maximise the life of the battery OPERATING TEMPERATURE RANGE
• Suitable for a wide range of battery types -30 oC to +55 oC
battery performance and life
• Switched mode design
STORAGE TEMPERATURE RANGE
• Fault output -40 oC to +85 oC
• Once the battery is fully charged the chargers
• Minimum 86% efficiency throughout full
switch to Eco-Power to save energy
operating range
• No external intervention for boost mode
• Can be integrated into external systems through • Multiple chargers can be linked together to
MODBUS RTU using RS485 provide larger current output
• Fully configurable via DSE Configuration Suite • Can be permanently connected to battery and
PC Software mains (utility) supply. No need to disconnect
• External remote LCD option through high load conditions.
RELATED MATERIALS
TITLE PART NO’S
DSE9000 Configuration Suite PC Software Manual 057-159
DSE Configuration Suite Installation & Operator Manual 057-151
DSE9460/DSE9461 Series Installation Instructions 053-148
DSE9460/DSE9461 Series Operator Manual 057-176
DSE2541 Data Sheet 055-160
DSE2541 Installation Instructions 053-154
DEEP SEA ELECTRONICS PLC UK DEEP SEA ELECTRONICS INC USA

Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH 3230 Williams Avenue, Rockford, IL 61101-2668 USA
TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708
EMAIL [email protected] WEBSITE www.deepseaplc.com EMAIL [email protected] WEBSITE www.deepseausa.com
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-153/11/12 US (4)
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457
11. 'UDZLQJV
Regulatory Review and Approval is required prior to changing this item per Drawing Name: A040A260 Revision: F
PGG 1-01-01-116. This item impacts compliance with these External Regulations: Part Name: A040A259 Revision: F
CE ECO-183845 Sheet 1 of 5
Drawing Name: 38SC112 Revision: C
Part Name: 38SC112 Revision: C
Sheet 1 of 2
P1
P1
LABEL DETAILS
CF1-3,X MAIN TAG : 2500A 4P FIXED TYPE ACB PANEL

INCOMING
CABLE
NRYB-4X100X5
R R R
INCOMING
R -PRASE R-PRASE R-PRASE
REARTRR REARTRR REARTRR
2500A
2200
Q0 Q0
2500A
OUTGOING
NRYB-4X100X5
OUTGOING
CABLE
25 R00 25
R50
FRONT VIEW COMPONENT LAYOUT SIDE VIEW
P1 TOP R ROTTOR
ARRRRNRRR
600
650
GRAND PRATE
TOP R ROTTOR
GRAND PRATE
FOUNDATION PLAN
PRORECT : TRTRE : SRPPRRER RANRFACTRRER DRAR RNG NO. : SREET :

006
RRRRRRRRRRRRR
2500A 4P FRRED TRPE ACR PANER T20-10R06 NERT SRT :
CRSTORER NARE : GENERARARRANGERENT 00R
RRRRRRRRRRRRR RNDER 0
RND DATE NATRRE OF RODRFRCATRON RND DATE NATRRE OF RODRFRCATRON
9,6,2

5(/12 /75 12 5(9,6,21 ':1 &.' $39' '$7(
ECO - 119132 R 1 SEE SREET TR O NAS NAS T.ARARR 02NOR11
2 SEE SHEET TWO NAS NAS T.AJAYI 02NOV11
3 SEE SHEET TWO NAS NAS T.AJAYI 02NOV11

4 SEE SHEET FOUR NAS NAS T.AJAYI 02NOV11
5 SEE SHEET FIVE NAS NAS T.AJAYI 02NOV11
' '
& &
PAGE TITLE DESCRIPTION

1 INDEX COVER PAGE
2 WIRING DIAGRAM SCHEMATIC, ELECTRICAL CONNECTIONS
3 GENSET LOCATION, GENSET DEVICE LOCATIONS ON GENSET AND HMI
4 LOCATION DIAGRAM, CONTROLS DEVICE LOCATIONS IN CONTROL BOX
5 OPTIONS ACCESSORY CONNECTIONS
6 ADDITIONAL PINOUTS ADDITIONAL PINOUT CONNECTIONS
% %
$ $
81/(6627+(5:,6(63(&,),('$// 6,072 ':1

',0(16,216$5(,10,//,0(7(56
'21276&$/(35,17 &.'
NRSCROTTRER
&800,1632:(5*(1(5$7,21
;`
NRSCROTTRER
$39' RRPORO

DRAGRARRSCRERATRC
',0
+2/(
.X `
'$7( 6,7(&2'(
01-04-2011
.XX` &21),'(17,$/ ':* ':*
3*.
)25,17(535(7$7,21 ),56786('21 6+((7
A035F359
6,=( 5(9
3523(57<2)&800,16 2)',0(16,21,1*$1'
$1*72/` 6&$/(

32:(5*(1(5$7,21
72/(5$1&,1*6((
$60(<0 RT50 ' 2) R

Drawing Name: A035M137 Revision: B

Part Name: A035F359 Revision: B
Sheet 1 of 7
9,6,2

5(/12 /75 12 5(9,6,21 ':1 &.' $39' '$7(
ECO R119132 B 1 ADD SHIELD TO S7 LEAD RONE D2 NAS NAS T.AJAYI 02NOV11
2 UPDATED PC TOOL SCHEMATIC RONE D6 AND RONE A5 NAS NAS T.AJAYI 02NOV11
3 ADD TEXT 50 DEGREER PARALLEL RONE D2 NAS NAS T.AJAYI 02NOV11
4 ADD WARE UP CONNECTION TO AUX 101 RONE C3 NAS NAS T.AJAYI 02NOV11
Sw BR R7 SW BR T26
REMOTE ERSTOP 3300 TB1R16 1B P2R12
1A 1B
5 4 2B
JUMPER 1 2A 2B J20R11
1 2 3300 TB1R15
3A 3B PRSWBR
REMOTE J20R11 Starter DisRonneRt InRRt
P2R5 6 1 P2R13
P3RB
JUMPER 2 4A 4B
ERSTOP 4 3
REMOVE R10RR6
1B
ERSTOP BR
PCC3300 J20R13 ReR
aRCoiRBR SRRRR
R
J20R16 OiRPriming PRmR ReR
aRDriver
Starter R9
5 4
X10 R10AR B1RBAT P3RA
P3RC
HEATER CONTROL RP3R
'
2B
' JUMPERS
1 AND 2 TO 3B BASEBOARD
P20R3
P2R6 6 1 P2R10
R4RS1
FUSED BR
P2R14 ENG SP4
X20 R20AR B1RBAT
R4
INSTALL P20R15 1B R9R1 S1 S2
4B SP4 P2R15
REMOTE ER P20R14 FSO RR TBRBAT
2B
STOP R16RA X21 R20AR
P20R9 B1RBAT R4RBAT R4
USER INTERFACE
5 4 3B R4R
GND P20R10 P21R9 RAUX 105R
4B
P20R20 P2R7 6 1 HMIRSP1
5B
P20R21 BATTERY Starter 1 Starter 2
LOCAL ERSTOP BR FRFSO 3A
PART NUMBERS P20R5 A B P2R11
FSO RR1R CHARGING
3 4 ALTERNATOR G1RBR
FUSED BR PCC3300: 0327R1601 P20R17 S7RC BR COOLANT LEVEL RS7R 24VDC
ERSTOP 2 1 INPUT RWARERUP ON OPENRP25R2 P20R22 S7RB GND 50 Regree RooR ing G1RDR
B1RBAT BT1
P20R2
P20R4
S7RD SIG oRtion Rses two
sensors in RaraRReR
G RS RS
RETURN P25R6 HARNESS, INTERFACE SHIELD GROUNDED IN FOUR PLACES
RWORT BOXR: HARNESS ENGINE:
A034R494
P20R7
G1RGND
M BT2 M
A035H2R2 P20R12
TB15R1 GND R10RSP BR RETURN
P20R1 1B GNDRENG
HMI 320 TB15R3 RS4R5 A P29 mRst Re

B1RGND RS B1RSW1 RS
PC RisRonneRteR to P29 mRst Re P20R6
TB15R4 RS4R5 B P2RR
TOOL Rse PC TooRs on RisRonneRteR to P20R1R 3B
TB15 Rse PC TooRs on USE SHIELDED TWISTED PAIR P2R9 ENG SP3 B1RSW2
DISPLAY TB15R5 WARERUP1 TB15
FOR PCC NET
P20R19
P20RR
P25R2
ONLY TERMINATE SHIELD ON
P29R4 AUTO RCONFIGURABLE WARERUPR P25R6
HARNESS, INTERFACE P25R11
ONE END TB1R1 PCC NET A RRR
PC TOOL: A035A671 P29R6 RUN RWARERUPR
TB1R2 PCC NET B RRR CUSTOMER INPUTS
P25R10
TB1R3 BR RETURN P2R1 1B FUEL LEVEL RETURN
J25R1 CIR4 FUEL LEVEL SWITCH RWARERUPR
HARNESS, INTERFACE TB1R5 CUSTOMER FUSED BR P2R3 2B P20R1R
J25R7
RPCC3300 TO HMIR: TB1R4 SEE SHEET 5 P2R2 3B P20R19
J25R12 A035G075 CIR12 RUPTURE BASIN SWITCH RWARERUPR
TB1R6 SEE SHEET 5 P2R4 4B RUPTURE BASIN RETURN
PART NUMBERS: PCC NET SHLD P25R9
P25R3 TB1R7 SEE SHEET 5
HMI 320: P29R2 PCC NET RRR
TB1RR SEE SHEET 5 P1R3
P25R4
0300R6315R02
AUX 101
SP3 HARNESS, INTERFACE TB1R9 SEE SHEET 5 P1R4
P25R5
P29R1 PCC NET RRR PCC3300RAUX101: P1R5
P25RR TB1R10 SEE SHEET 5
&
A035E359
& P29R3 SYSTEM WARERUP
TB1R11 SEE SHEET 5
TB15R5 WARERUP3
P1R2
P11
TB1R12 SEE SHEET 5 P1R1 REMOTE IRO SEE SHEET 5
BUS CT SHORTING BLOCR BUS CURRENT TB1R13 SEE SHEET 5 SEE SHEET 5
CT1R1B
P10
CT1 TB1R14 SEE SHEET 5 P14R2 SEE SHEET 5 SEE SHEET 5
CT1R2B TB1R15 P14R1 SEE SHEET 5 SEE SHEET 5
P2RR1 HMI FUSED BR SP1 FUSED BR,4B CT2R3B
REMOTE ERSTOP 2B PART EXHAUST TEMP RIGHT BANR RTD RE7R
CT2 TB1R16 P10R3, P11R6 P11R6 SENSE E7RA
CT2R4B
REMOTE ERSTOP 1B NUMBERS
P10R9, P11R5 P11R5 RETURN E7RB
P2RR3 BR RETURN SP2 CT3R5B CT3
AUX 101: P10R4, P11RR P11RR SENSE
CT3R6B 0327R1536 P10R10, P11R7 P11R7 RETURN
PC TOOL SEE SHEET 5 SEE SHEET 5 EXHAUST TEMP LEFT BANR RTD RE6R
TB15R1 GND J4R1
SEE SHEET 5 SEE SHEET 5 E6RA
HARNESS, BUS: HARNESS, INTERFACE W1 SHIELD R16
HMI 114
A035ER47 PC TOOL TO PCC3300: SEE SHEET 5 SEE SHEET 5 E6RB
TB15R3 RS4R5 A 7 4 J4R3
BUS VOLTAGE A040D379 SEE SHEET 5 SEE SHEET 5
LEGEND
1B BUS L1 TB7R1 TB15R4 RS4R5 B R 5 J4R4
SEE SHEET 5 SEE SHEET 5
BARGRAPH 2B BUS L2 USE PTR
IF LL
s TB7R2
TB15R5 WARERUP3
9 6 J4R5
SEE SHEET 5 SEE SHEET 5
3B BUS L3 VOLTAGE TB7R3
FUSED BR R2B SEE SHEET 5
4B BUS L4 R600VAC TB7R4 A B
PART NUMBERS P1R3 PCC NET A RRR P1R5 RAUX 101R AUX 101 IS RERUIRED FOR EXHAUST SEE SHEET 5 OPTIONAL
P1R4 PCC NET BRRR P26R2
HMI 114: MODBUS
TEMPERTURE SENSING.
P1R5 SYSTEM WARERUP J26R3 AVR PWMR 1B
0300R6366R02
J26R5 AVR BR RETURN FACTORY CONNECTIONS
P6R2 BR RETURN J26R6 NRA 1
P12R1 3B
P6R1 HMI FUSED BR D1
J26R7 FIELD CURRENTR 2 4B FAST ON CONNECTOR
P12R4
J26RR BR RETURN 3 5B
P12R2
J26R9 AVR BR
P12R5 HARNESS, HARNESS, SET SCREW TERMINAL
J26R14 FIELD CURRENTR
P12R3 ALTERNATING INTERFACE
CURRENT: PCC3300 TO AUX 105: J26R16 AVR PWMR LOW COOLANT TEMPERATURE RS4R
P12R6 PLUG CONNECTOR
A034Y614 A035G905 J26R17 NRA
J26R1R REYSWITCH BR OUT
R GENSET VOLTAGE
P22R1
P26R15
RING TERMINAL
DRIVER ALTERNATOR P22R2
P26R1 P1939 SHLD
RATING P26R10 P1939 RRR
% S:
P22R3
P22R4
P26R11 P1939 RRR 120 ohm ORens R R5F, CR
oses R 65F %
P26R12 PCC NET A RRR
4 AMPS P26R13 PCC NET B RRR
PEAR : P26R4 SHLD
6 AMPS
R
AUX 104 FUEL ACTUATOR R6AMP MAXR
ACT RRR
P21R12 GOV POWER STAGE
TERMINAL BLOCR
AUX 105 P21RR
P21R2
Part nRmRers
J1R1
J1R2
P1 R1
P1 R2
ACT RRR
N W V U HM ECM R AVR P21R3 120 ohm ARR104: 0327R1507 J1R5

P1R5 GOV PS POWER
CT21R1 P1 Mate: 0323R2216 : P1R4 ACT LS DRIVER

J1R4
CTR23
POWERSTAGE BR RETURN R1B SoRRets: 0323R1200 J1R3
P1R3 GOV PS POWER
CT21R2R3 P21R6 R10RSP
CT22R1 R7 R5
P21R9 FUSED BR R3B OIL PRESSURE RE1R
R10 REYSWITCH
CTR22 E1RB
CT22R2R3 30 R6
P21R11 E1RA
ERSTOP BR R2B
CT23R1 PART NUMBERS E1RC
CTR21 AUX 105: A02RT766
CT23R2R3
XU R.5AR P11R5 GOVERNOR PWM R MAG PICRRUP RP1R

P11R4 GOVERNOR PWM R P1RA
USE PTR s XV R.5AR
P11R1 R5V P1RB
IF LL XW R.5AR P11R2 RETURN
VOLTAGE P11R3 SENSE
R600VAC COOLANT TEMP LEFT BANR RE2R
E2RA
AVR POWER P11RR SHIELD E2RB
$ PMGRP2 P1RR1 P11R9 R $
PMGRP3 P1RR2 P11R10 R
PMGRP4 P1RR3 P11R11 SENSE OIL TEMPERATURE RE4R
PMG P11R12 RETURN E4RA
G FIELD RRR
FIELD RRR
AVR CONTROL
P17R1
P17R2
P11R13 SENSE
P11R14 RETURN
P11R15 SENSE
E4RB
P11R16 RETURN
81/(6627+(5:,6(63(&,),('$// 6,072 ':1
&800,1632:(5*(1(5$7,21
PC TOOL NRSCHOTTLER
TB15R1 GND ',0(16,216$5(,10,//,0(7(56
J5R1 '21276&$/(35,17 &.'
RS4R5 SHIELD COOLANT TEMP RIGHT BANR RE3R ;`
NRSCHOTTLER
TB15R3 RS4R5 A HARNESS, INTERFACE E3RA $39'
+2/(
J5R3 MRPORO
DIAGRAM, SCHEMATIC
',0
TB15R4 RS4R5 B PC TOOL: A035A671 .X `
J5R4 E3RB
'$7( 6,7(&2'(
J5R5 01R04R2011
.XX` &21),'(17,$/ ':* ':*
3*.
)25,17(535(7$7,21 ),56786('21 6+((7
A035F359
2)',0(16,21,1*$1' 6,=( 5(9
3523(57<2)&800,16
$1*72/` 6&$/(

32:(5*(1(5$7,21
72/(5$1&,1*6((
$60(<0 RT50 ' 2) B


Sheet 2 of 7
9,6,2

5(/12 /75 12 5(9,6,21 ':1 &.' $39' '$7(
ECO R119132 B R R NAS NAS T.AJAYI 02NOV11
' '
LOW COOLANT
COOLANT
TEMPERATURE
TEMP RIGHT COOLANT
RS4R
BANR RE3R TEMP LEFT
BANR RE2R
$
&
BR MAG PICRUP
OIL RP1R
GND ENG T 26
$ PRESSURE
& BR RETURN RE1R
& % % &
BATTERY CABLES
TBRBAT R4
OIL
TEMPERATURE
RE4R
% %
COOLANT
LEVEL RS7R SEE NOTE 1
HMI 114
HMI 320 NOTES:
1. LOW COOLANT LEVEL SENSOR RS7RIS

LOCATED AT THE TOP OF THE RADIATOR.
$ $
CTR21
CTR22 CTR23 RADIATOR VIEW
81/(6627+(5:,6(63(&,),('$// 6,072 ':1
LOCAL ERSTOP ',0(16,216$5(,10,//,0(7(56

'21276&$/(35,17 &.'
NRSCHOTTLER
&800,1632:(5*(1(5$7,21
;`
NRSCHOTTLER

DIAGRAM, SCHEMATIC
$39' MRPORO
',0
+2/(
.X `
VIEW ARA '$7( 6,7(&2'(
VIEW BRB .XX`
01R04R2011
&21),'(17,$/ )25,17(535(7$7,21 ':* ':*
3*. '
),56786('21 6+((7
A035F359
6,=( 5(9
3523(57<2)&800,16 2)',0(16,21,1*$1'
$1*72/` 6&$/(

32:(5*(1(5$7,21
72/(5$1&,1*6((
$60(<0 RT50 2)
B


Sheet 3 of 7
9,6,2

5(/12 /75 12 5(9,6,21 ':1 &.' $39' '$7(
ECO R119132 B R R NAS NAS T.AJAYI 02NOV11
' '
CIR12 RUPTURE BASIN

SWITCH RWARERUPR
SWITCH RWARERUPR
CIR4 FUEL LEVEL
. )$7 BUS CT
FRFSO . $
. SHORTING
R3AR . BLOCR
. 02'%86 REMOTE ERSTOP FUSED SW BR BR OPTIONAL RELAYS 6X RR13,R14,R15,R19,R20,R21R 1A 2A 3A 4A 5A 6A
HEATER BUS
ERSTOP BR BR RETURN POWER VOLTAGE
1 2 3 4 5 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4
A A A A A A A A A A
A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A
1 2 3 4 5 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4
B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B
&
B L1 L2 N G L1 L2 L3 N
&
1B 2B 3B 4B 5B 6B
AUX 104
TB1 TBR
R7 RR R9 J1R
J TB3 TB5 TB10
1
J26 J14
J25
TB
15
J4 '&:,5(
J J17 (175$1&(
% 10 %
TB
J J3 J20 9
11
J21
J2 J11
TB
15
CT3 CT2 CT1

J14 J1 J12
$&:,5( J22 TB7
(175$1&(
$ $
$8; $8;
81/(6627+(5:,6(63(&,),('$// 6,072 ':1

&800,1632:(5*(1(5$7,21
NRSCHOTTLER
',0(16,216$5(,10,//,0(7(56
;` '21276&$/(35,17 &.' NRSCHOTTLER

$39'
VIEW CRC MRPORO
DIAGRAM, SCHEMATIC
',0
+2/(
.X `
'$7( 6,7(&2'(
01R04R2011
.XX` &21),'(17,$/ )25,17(535(7$7,21 ':* ':*
3*. '
),56786('21 6+((7
A035F359
3523(57<2)&800,16 2)',0(16,21,1*$1' 6,=( 5(9
$1*72/` 6&$/(

32:(5*(1(5$7,21
72/(5$1&,1*6((
$60(<0 RT50 2)
B


Sheet 4 of 7
9,6,2

5(/12 /75 12 5(9,6,21 ':1 &.' $39' '$7(
ECO R119132 B 5 CONTROL BOX HEATER CONNECTION 2B WAS 1B NAS NAS T.AJAYI 02NOV11
ALTERNATOR HEATER CONNECTION 3B WAS 4B RONE A6
OPTIONAL RELAYS PARALLELING CIRCUIT

BREARER RELAY CONTROL
PCC
3300 TB1 TB10
A1 13 21 43 43 ALARM
A2 14 22 44 44
RELAY R21 RTD CONNECTIONS
ALARM MODULE THERMISTOR RELAY
' PCC
J22R4 RNR '
TB1R5 3300 TB1 WHITE
BR
TB1R6 TB10R5 BR RED N.D.E
A1 13 21 43 43 CONFIGURABLE R19 R17 BEARING
AUDIBLE RTIMER 0R10SECR RED RTD
RELAY R13 PCC 3300 TBRR7
5(6(7
TB1RR A2 14 22 44 44
A1 13 21 43 43 ALARM WHITE
TB1R9 MODULE J22R3 RWR FAT R2AR D.E
A2 14 22 44 44 RED
TB1R5 J1R BEARING
TB1R10 BR A1 A2 R RED RTD
GND
A1 13 21 43 43 TB10R10 GND CIRCUIT BREARER TRIPPED 16 1R 26 2R
CONFIGURABLE J2R R1R WHITE
A2 14 22 44 44 RELAY R14 RTEMPERATURE RED
PCC PTC W2
3300 TBR TB1RR MONITORINGR 15 25
PC3300 TB10 Ta TR RED RTD
TB1R9 WHITE
R20 TB10R2 Generator CirRRit BreaRer
A1 TB1R10 RED
13 21 43 43 CONFIGURABLE GND V2
A2 14 22 44 44 RELAY R15 A1 13 21 43 43 SDE ContaRt RED RTD
R17
14 22 44 44 WHITE
A2 RDELAYED MARER
RED U2
RED RTD
TB5 PCC 3300 TBRR12 WHITE
CLOSE STATUS OUTPUT
TBRR9 RED W1
TBRR10 RED RTD
TB10R10
OPEN STATUS OUTPUT WHITE
RED V1
& &
RED RTD
WHITE
ALT. TEMP
THERMISTORS RED U1
RED RTD
HEATERS RCOOLANT, CONTROL BOX, ALTERNATORR
HEATER CONTROL BOX

FReRLeveR GROUND FAULT RELAY
PCC BR RETURN R2B CT1

3300 TBR
SW BR R3B
RHI1 CT3
RHI1 PCC
3300 TB1 $ $ 7 7
FUSE1
4A
PCC 3300 TB1R14

126
250
252
253
254
255
90
High R
eveRwarning .
N
E
E
TBRRR
% R23 %
5+0
PCC 3300 TB1R13

HT1 HT2
BATT RVE
RBR RETURNR TBRR13 SHUNT TRIP
BATT RVE
Low FReRwarning 34 31 32
RSW BRR TB1R12
HE1 HE2 TB1R13
7(67
CRstomer InRRts
215(/$<23(5$7,21$/
TerminaRRRoRR
1A 2A 3A 4A
CONTROL BOX HEATER
5(6(7
1B 2B 3B 4B
Low FReRShRtRown
1A 2A 3A 4A 5A
1B 2B 3B 4B 5B
ALTERNATOR HEATER
*URXQG)DXOW5HOD\LVDYDLODEOHRQVLQJOHVHW
DSSOLFDWLRQVRQO\
$ $
HP
HA
81/(6627+(5:,6(63(&,),('$// 6,072 ':1

',0(16,216$5(,10,//,0(7(56
'21276&$/(35,17
NRSCHOTTLER
&800,1632:(5*(1(5$7,21
&.'
;`
NRSCHOTTLER
$39'
+2/(
MRPORO
DIAGRAM, SCHEMATIC
',0
.X `
'$7( 6,7(&2'(
01R04R2011
.XX` &21),'(17,$/ ':* ':*
3*.
)25,17(535(7$7,21 ),56786('21 6+((7
A035F359
2)',0(16,21,1*$1' 6,=( 5(9
3523(57<2)&800,16
$1*72/` 6&$/(

32:(5*(1(5$7,21
72/(5$1&,1*6((
$60(<0 RT50 ' 2) B


Sheet 5 of 7
9,6,2

5(/12 /75 12 5(9,6,21 ':1 &.' $39' '$7(
RRR R11913R B R R NAS NAS RRARARR 0RNRR11
PRR3300 RB1R1 PRR NRR A RRRSRR SRRRR R
BASRBRARD
RB1RR PRR NRR B RRRSRR SRRRR R
RB1R3 BR RRRRRN SRR SRRRR R
PRR3300
PARR NRMBRRS
RB1R5 RRSRRMRR FRSRD BR SRR SRRRR R BASRBRARD
PRR3300: 03R7R1R01 RB1RR RRNFRRRRABRR RRP R5
PARR NRMBRRS ARR 101
RB1RR RRNFRRRRABRR RRP R1RA RRR1 RRRAR 1 NR '
RB1R7 RRNFRRRRABRR RRP R1RB
PRR3300: 03R7R1R01
RBRR1 DRSRRRRR RNPRR RRRRRN RRMRRR RRR RRRR RRRAR 1 RRM
RB1RR RRNFRRRRABRR RRP RRRA RBRRR DRSRRRRR RNPRR RRRRRN RRR3 RRRAR 1 NR
RB1R9 RRNFRRRRABRR RRP RRRB RBRR3 DRRARRD RFF RRRAR DRRRRR RRRR RRRAR R NR
RB1R10 RRMRRR SRARR RRRRRN RBRRR SR RRRRRD BR RRRAR DRRRRR RRR5 RRRAR R RRM
RB1R11 RRMRRR SRARR RBRR5 RRMRRR FARRR RRSRR RRRR RRRAR R NR
RB1R1R RRNFRRRRABRR RRP R1 RBRRR SRARR RRPR RRR7 RRRAR 3 NR
RB1R13 RRRRRN RBRR7 RRNFRRRRABRR RNPRR R13 RRRR RRRAR 3 RRM
RB1R1R RRNFRRRRABRR RRP RR RBRRR RRNFRRRRABRR RNPRR R1R RRR9 RRRAR 3 NR
RB1R15 RRMRRR RRSRRP SRR SRRRR R RBRR9 RRNFRRRRABRR RRRPRR RR RRR10 RRRAR R NR
RB1R1R RRMRRR RRSRRP SRR SRRRR R RBRR10 RRNFRRRRABRR RRRPRR R3 RRR11 RRRAR R RRM
RBRR11 RRAD DRMP RRRAR DRRRRR RRR1R RRRAR R NR
RBRR1R DRSRRRRR RNPRR RRRRRN
RB3R1 RRRRRN RBRR13 DRSRRRRR RNPRR RRRRRN
RB3RR MASRRR RAN SRRRRD
R3R1 RRRAR 5 NR
RB3R3 MASRRR RAN R
R3RR RRRAR 5 RRM
RB3RR MASRRR RAN R
R3R3 RRRAR 5 NR
RB3R5 RRNFRRRRABRR RRPRR RR0 SRARRS
RB9R1 RR RRAD SRRPRRNR R3RR RRRAR R NR
RB3RR RRNFRRRRABRR RRPRR RR1 SRARRS
RB9RR ANARRR RRRRRN R3R5 RRRAR R RRM
RB3R7 SPARR RRRPRR FRR FRRRRRR RSR
RB9R3 RRAR RRAD SRRPRRNR R3RR RRRAR R NR
RB3RR RRNFRRRRABRR RRPRR RRR SRARRS &
RB9RR RRRRARR BRAS RRRPRR RRRNFRRRRABRR ANARRRR RRRPRR RR RRRPRR PRRDRRRRR
RB3R9 RRANSFRR RNRRBRRRRRNFRRRRABRR RNPRR RR0 SR RRRR
RB9R5 SPRRD BRAS RRRPRR RRRNFRRRRABRR ANARRR RRRPRR R1 RRRPRR PRRDRRRRR
RB3R10 RRRRANSFRR RNRRBRRRRRNFRRRRABRR RNPRR RR1 SR RRRR
RB9RR ANARRRR RRRRRN RRR1 RRRAR 7 NR
RB3R11 MASRRR FRRSR SRARR SRARRS
RB9R7 RR RRAD SRARR RRRRR RRRR RRRAR 7 RRM
RB3R1R RRRRRN
RB9RR NRR RSRD RRR3 RRRAR 7 NR
RB9R9 RRAD SRARR SRRRRD RRRR RRRAR R NR
RB5R1 RRNSRR RB RRRSR SRARRS RB9R10 R RRAR RRAD SRARR RRRRR RRR5 RRRAR R RRM
RB5RR RRNSRR RB RRRSR SRARRS RB9R11 RRRAR RRAD SRARR RRRRR RRRR RRRAR R NR
RB5R3 RRNSRR RB RPRN SRARRS
RB5RR RRNSRR RB RPRN SRARRS
R10R1 RAN R
RB5R5 RRNSRR RB RPRN SRARRS
R10RR RAN R
RB5RR RRRRRRR RB RRRSR SRARRS
R10R3 RNPRR R3 RRRRRNR SRRRRR RSRR SRRRR RR
RB5R7 RRRRRRR RB RRRSR SRARRS
R10RR RNPRR RR RRRRRNR SRRRRR RSRR SRRRR RR
RB5RR RRRRRRR RB RPRN SRARRS RB10R1 RRRRRN
R10R5 RNPRR R5 RRRRRNR SRRRRR
RB5R9 RRRRRRR RB RPRN SRARRS RB10RR RRRRRN
R10RR RNPRR RR RRRRRNR SRRRRR
RB10R3 RRRRRRR RB PRS A SR RRRR
R10R7 5RDR SRPPRR R1 RR0 mA MARR
RB10RR RRRRRRR RB PRS BRRRNFRRRRABRR RNPRR RR3 SR RRRR
R10RR 5RDR SRPPRR RR RR0 mA MARR
RB10R5 RRRRRRR RB RRRPPRD SR RRRR
R10R9 RNPRR R3 RRRRRNR RRRRRN RSRR SRRRR RR
RB10RR RRRRRRR RB RNRRBRRRRRNFRRRRABRR RNPRR RR5 SR RRRR
R10R10 RNPRR RR RRRRRNR RRRRRN RSRR SRRRR RR
RB10R7 RRNSRR RB PRS A SR RRRR
R10R11 RNPRR R5 RRRRRNR RRRRRN
RB10RR RRNSRR RB PRS BRRRNFRRRRABRR RNPRR RRR SR RRRR %
R10R1R RNPRR RR RRRRRNR RRRRRN
RB10R9 RRRRRN
RB10R10 RRNSRR RB RRRPPRD SR RRRR
RB10R11 RRNSRR RB RNRRBRRRRRNFRRRRABRR RNPRR RRR SR RRRR
R11R1 RNPRR R1 RRRRRN
RB10R1R RRRRRRR SRNRRR MRDR RRRRFRRRRNFRRRRABRR RNPRR RR9 SR RRRR
R11RR RNPRR R1 SRNSR
RB10R13 SRNR RNABRRRRRNFRRRRABRR RNPRR RRR SR RRRR
R11R3 RNPRR RR RRRRRN
RB10R1R RRAD DRMAND SRRP RRNFRRRRABRR RRPR31
R11RR RNPRR RR SRNSR
RB10R15 RAMP RRADRRNRRAD RRNFRRRRABRR RRPR3R
R11R5 RNPRR R3 SRNSR RRRRRN RSRR SRRRR RR
RB10R1R RRRRRN
R11RR RNPRR R3 SRNSR RSRR SRRRR RR
RB10R17 RRRRRN
R11R7 RNPRR RR SRNSR RRRRRN RSRR SRRRR RR
R11RR RNPRR RR SRNSR RSRR SRRRR RR
R11R9 RNPRR R5 SRNSR RRRRRN
R11R10 RNPRR R5 SRNSR
R11R11 RNPRR RR SRNSR RRRRRN
R11R1R RNPRR RR SRNSR
R11R13 RNPRR R7 RRRRRN
R11R1R RNPRR RR SRNSR RANARRR 0R3RRDRR
R11R15 RNPRR RR RRRRRN
R11R1R RNPRR RR SRNSR RANARRR 0R3RRDRR
$ $
81/(6627+(5:,6(63(&,),('$// 6,072 ':1

',0(16,216$5(,10,//,0(7(56
'21276&$/(35,17
NRSRRRRRRRR
&800,1632:(5*(1(5$7,21
&.'
;R
NRSRRRRRRRR
$39'
+2/(
MRPRRR
DRARRAMRSRRRMARRR
',0
RR R
'$7( 6,7(&2'(
01R0RRR011
RRRR &21),'(17,$/ ':* ':*
3*.
)25,17(535(7$7,21 ),56786('21 6+((7
A035F359
2)',0(16,21,1*$1' 6,=( 5(9
3523(57<2)&800,16
$1*72/R 6&$/(

32:(5*(1(5$7,21
72/(5$1&,1*6((
$60(<0 RR50 ' 2) B


Sheet R of 7
KEY PLAN
KEY PLAN N
WH
QRI
SNF
GENERAL NOTES :
REV. DATE DESCRIPTION DRN. CHK. APD.
SECTION-A
Health Facilities Development

Sheikha Nout Building, P.O. Box 3050, Doha, Qatar
Tel: +974 4439 5231; Fax: +974 4439 5940 ; www.hamad.qa
DESIGN CONSULTANT
CONTRACTOR
INSULATION DETAILS
GEN SET SUPPLIER:
PIPE SUPPORT DETAILS CUMMINS QATAR

P.O. BOX. 201710, Doha-Qatar
Tel :+974 44533777, Fax:+9744501291
PROJECT:
REMODELING & FIT-OUT OF THE
EXISTING SKILLED NURSING FACILITY,
MEDICAL CITY HOSPITAL
LOCATION: MEDICAL CITY
TITLE:
GENERATOR ROOM SECTION & DETAILS
MUFFLER SUPPORT DETAILS

DRAWN: - AFFAN CHECKED: - VINISH APPROVED: -
RAIN CAP DETAILS DATE: -
DRAWING NUMBER:
SCALE: - SHEET SIZE: A1
REV.
- CQ-18022021 -
Ramp Oil Room
UP Fuel
Ramp
UP
GF GE GD GC GB GA GF GE GD GC GB GA UP
DN
Gene
rator
Room
FHC
Ramp
UP
Room
MV
COMM
17.12 sqm
ST1
DN
SNF-
Elec.Room
-38
9.56 sqm
SNF
36
SNF-
UP
LOBBY SHAFT
MALE PUBLIC
TOILET HSKP
25.13 sqm 11.67 sqm
OFFICE
13.91 sqm
FEMALE PUBLIC
TOILET
25.97 sqm CAFE &
SEATING
37.75 sqm
DISCHARGE
PHARMACY OPEN OFFICE SPACE
39.05 sqm +
INFORMATION COUNTER
73.83 sqm
WAITING &
FIRE CONTROL CHILDREN'S PLAY
49.63 sqm LIFT 42.51 sqm
- E3 VESTIBULE
LOBBY
LIFT
RECEPTION
51.15 sqm
VESTIBULE
- STORE
7.13 sqm SECURITY
COUNTER
ST5
ST5
LIFT
OFFICE UP
SNF-
SNF-
17.60 sqm
E3
OFFICE
16.18 sqm
SECURITY OFFICE
17.94 sqm
35.15 sqm OFFICE
17.63 sqm
DISCHARGE OPEN OFFICE SPACE

126.40 sqm
LOUNGE
48.68 sqm
STAFF LOUNGE
11.94 sqm
SNF-ST6
UP
HSKP PANTRY
11.76 sqm
9.21 sqm
MALE STAFF
TOILET
18.43 sqm
UP CONFERENCE RM
31.32 sqm
FEMALE STAFF
SNF-ST2
TOILET SNF-37
16.80 sqm
SHAFT LOBBY SNF-39

DN
COMM Elec.Room
6.10 sqm 8.20 sqm
VESTIBULE
G3
G1
SNF HOSPITAL KEY.PLAN
KAHRAMAA GENERAL NOTES
FUEL OIL ROOM
1. CRANE, EQUIPMENT AND CABLE ACCESS TO THE SUBSTATION TO BE
ALWAYS AVAILABLE.
2. NO SERVICES INSIDE SUBSTATION.
3. MV ROOM FLOOR FINISH TO BE EPOXY COATED.
-
S1 4. FINISH FLOOR LEVEL TO VERY SMOOTH AND THE TOLERANCE NOT TO BE
- S1 MORE THAN (±3mm) MAXIMUM.
5. CONSULTANT (NOT CONTRACTOR) TO CONTACT KAHRAMAA CIVIL UNIT
G2
BEFORE STARTING THE CONSTRUCTION OF SUBSTATION WITH ORIGINAL
G2
E4 APPROVED DRAWINGS (COPIES ARE NOT ACCEPTED) FOR GETTING
-
PERMISSION FROM KM TO SUPERVISE ALL CONSTRUCTION STAGES OF
E4 SUBSTATION. (FORM OF CONSULTANT SUPERVISION OF CONSTRUCTION
- E3 E2 TO BE USED IN THIS REGARD-ED-EDC-P6/F1)
-
MV ROOM GENERATOR ROOM GCP ROOM - 6. SUBSTATION ROOM'S HEIGHT IS (3.65m) MINIMUM.
7. UNDERTAKING OF RESPONSIBILITY OF THE STRUCTURAL DESIGN IS TO BE
- SUBMITTED TO KM AT BUILDING PERMIT STAGE. PLEASE REFER TO BP
APPLICATION FORM .
S2 8. SUBSTATION LEVELS BASED ON THE FRONT ROAD LEVEL =+/-0.00
9. SUBSTATION AND TRANSFORMER ROOMS MUST BE PROVIDED WITH
COOLING AND EQUIPPED WITH ALL NECESSARY HANDLING TOOLS
(i.e. CRANES, FORKLIFT, TROLLEYS, etc.)
10. A COMPLETE HAZARDS STUDY SHALL BE DONE BY CONSULTANT WHEREBY
THE CONSULT SHALL PROPOSED A SUITABLE FIRE FIGHTING SYSTEM
NOVEC FOR THE ELECTRICAL SUBSTATION AND TRANSFORMERS ROOM.
FOR GENSET FOR GCP FOAM 11. CONSULTANT SHALL BE PROVIDE "METHOD STATEMENT" WITH THE
HV RM
FOAM NOVEC FOR FUEL RM BUILDING PERMIT APPLICATION WITH A CLEAR DRAWING SHOWING
G3
G1
METHOD OF DELIVERY AND REPLACEMENT OF THE ELECTRIC
EQUIPMENT'S IN THE SUBSTATION i.e. TRANSFORMERS AND MV SWITCH
GEARS.
12. CONSULTANT MUST PROVIDE WITH THE BP APPLICATION A SIGNED
SUBSTATION ABOVE GROUND AGREEMENT (EPP-P5/F12)
13. ALL ELECTRICAL WORKS SHOULD BE CARRIED OUT UNDER THE SUPER-
VISION AND INSTRUCTIONS OF KAHRAMAA.
E1 E1
-
-
1 GROUND FLOOR PLAN 2 ROOF FLOOR PLAN

A-B-0001 SCALE 1:100 A-B-0001 SCALE 1:100
GF GE GD GC GB GA G3 G2 G1
PARAPET PARAPET
LVL +6.20 LVL +6.20
ROOF FL ROOF FL
FFL +5.20 FFL +5.20
GROUND FL GROUND FL
FFL ±0.00 FFL ±0.00
E2 ELEVATION
E1 ELEVATION A-B-0001 SCALE 1:100
A-B-0001 SCALE 1:100
G1 G2 G3
GA GB GC GD GE GF 01 22-03-2021 ISSUED FOR APPROVAL MA LSE YSY
00 13-03-2021 ISSUED FOR APPROVAL JDC LSE YSY
PARAPET PARAPET REV. DATE DESCRIPTION DRN. CHK. APD.

LVL +6.20 LVL +6.20
ROOF FL ROOF FL
FFL +5.20 FFL +5.20
200
Health Facilities Development
Sheikha Nout Building, P.O. Box 3050, Doha, Qatar
Tel: +974 4439 5231; Fax: +974 4439 5940 ; www.hamad.qa
CONSULTANT
GROUND FL GROUND FL
FFL ±0.00 FFL ±0.00
E3 ELEVATION E4 ELEVATION A DETAIL - A

DESIGN CONSULTANT
A-B-0001 SCALE 1:100 A-B-0001 SCALE 1:100

A-B-0001 SCALE 1:20
A 4F Hyundai bldg., 75, Yulgok-ro, jongno-gu,

Seoul, 110-793, Korea
A-B-0001 GF GE GD GC GB GA Tel : 82-2-746-6500
http://www.hda.co.kr
Fax : 82-2-746-6600
CONTRACTOR
PARAPET
LVL +6.20
200
200
4F Hyundai bldg., 75, Yulgok-ro, jongno-gu,
ROOF FL Seoul, 110-793, Korea P.O.Box 93808, Doha, Qatar
FFL +5.20 Tel : 82-2-746-6500 Tel:(974) 44377360
Fax : 82-2-746-6600 Fax: (974) 44377359
http://www.hdec.co.kr
GENSET ROOM
PROJECT:
1800
1800
1800
1800
1600
1600
MV ROOM GCP ROOM FUEL OIL ROOM REMODELING & FIT-OUT OF THE
EXISTING SKILLED NURSING FACILITY,
MEDICAL CITY HOSPITAL
250
250
LOCATION: MEDICAL CITY
TITLE:
100
100
GROUND FL 100 200 1000 200 100 100 200 1000 200 100
FFL ±0.00 1600 1600
EXTERNAL SUBSTATION
PLAN, ELEVATION, SECTION
PIT
FFL -1.10 DRAWN: MA CHECKED: LSE APPROVED: YCY
SHEET
S1 SECTION S2 TRENCH SECTION DATE: 22.MAR.2021 SCALE: 1 / 100
SIZE:
A1
A-B-0001 SCALE 1:50 DRAWING REV.

A-B-0001 SCALE 1:100 NUMBER:
MCMP29-HEC-MCQ03-00-IFC-A-B-0001 01
12. :DUUDQW\6WDWHPHQW
Warranty Statement
Global Commercial Warranty Statement
Generator Set
English
Original Instructions -2017 A028U870 (Issue 5)
0MQMXIH;EVVERX] )RZMVSRQIRXEP 4VSXIGXMSR %KIRG] z 7XEXMSREV]
)QIVKIRG] )4%7) MW HIJMRIH EW FIMRK XLI
QE\MQYQTS[IVEZEMPEFPIHYVMRKEZEVMEFPIIPIGXVMGEP
'SQQIVGMEP+IRIVEXMRK7IX TS[IV WIUYIRGI YRHIV XLI WXEXIH STIVEXMRK
8LMW PMQMXIH [EVVERX] ETTPMIW XS EPP 'YQQMRW 4S[IV GSRHMXMSRW JSV [LMGL E KIRIVEXSV WIX MW GETEFPI SJ
+IRIVEXMSR FVERHIH GSQQIVGMEP KIRIVEXMRK WIXW HIPMZIVMRK MR XLI IZIRX SJ E YXMPMX] TS[IV SYXEKI SV
ERH EWWSGMEXIH EGGIWWSVMIW LIVIMREJXIV VIJIVVIH XS YRHIV XIWX GSRHMXMSRW ERH YWIH MR WXVMGX EGGSVHERGI
EW4VSHYGX [MXL XLI )4% 2747 JSV WXEXMSREV] IRKMRIW '*6
TEVXWYFTEVXW----ERH....[LIVIEVIPMEFPIYXMPMX]
8LMW [EVVERX] GSZIVW ER] JEMPYVIW SJ XLI 4VSHYGX QYWX FI TVIWIRX 8LI TIVQMWWMFPI EZIVEKI TS[IV
YRHIV RSVQEP YWI ERH WIVZMGI [LMGL VIWYPX JVSQ E SYXTYX SZIV LSYVW SJ STIVEXMSR WLEPP RSX I\GIIH
HIJIGXMRQEXIVMEPSVJEGXSV][SVOQERWLMT SJXLI)4%7)
;EVVERX]4IVMSH (EXE'IRXIV'SRXMRYSYW('' MWHIJMRIHEWXLI

8LI[EVVERX]WXEVXHEXIjMWXLIHEXISJMRMXMEPWXEVXYT QE\MQYQTS[IV[LMGLXLIKIRIVEXSVMWGETEFPISJ
JMVWX VIRXEP HIQSRWXVEXMSR SV QSRXLW EJXIV JEGXSV] HIPMZIVMRKGSRXMRYSYWP]XSEGSRWXERXSVZEV]MRK
WLMTHEXI[LMGLIZIVMWWSSRIV7IIXEFPIJSVHIXEMPW IPIGXVMGEPPSEHJSVYRPMQMXIHLSYVWMREHEXEGIRXIV
ETTPMGEXMSR
'SRXMRYSYW 4S[IV '34 MW HIJMRIH EW FIMRK XLI
QE\MQYQTS[IV[LMGLXLIKIRIVEXMRKWIXMWGETEFPI &EWI;EVVERX]'SZIVEKI(YVEXMSR
SJHIPMZIVMRKGSRXMRYSYWP][LMPWXWYTTP]MRKEGSRWXERX ;LMGLIZIVSGGYVWJMVWX
IPIGXVMGEP PSEH [LIR STIVEXIH JSV ER YRPMQMXIH 6EXMRK 1SRXLW 1E\,SYVW
RYQFIV SJ LSYVW TIV ]IEV 2S SZIVPSEH GETEFMPMX] MW '34 9RPMQMXIH
EZEMPEFPIJSVXLMWVEXMRK
464 9RPMQMXIH
4VMQI 4S[IV 464 MW HIJMRIH EW FIMRK XLI 084 LVW
QE\MQYQTS[IV[LMGLEKIRIVEXMRKWIXMWGETEFPISJ )74 LVW
HIPMZIVMRK GSRXMRYSYWP] [LMPWX WYTTP]MRK E ZEVMEFPI )4%7) 9RPMQMXIH
IPIGXVMGEP PSEH [LIR STIVEXIH JSV ER YRPMQMXIH
RYQFIV SJ LSYVW TIV ]IEV 8LI TIVQMWWMFPI EZIVEKI ('' 9RPMQMXIH
TS[IV SYXTYX SZIV LSYVW SJ STIVEXMSR WLEPP RSX j
;EVVERX]WXEVX HEXI JSVHIWMKREXIHVIRXEPERHSMPERHKEWQSHIP
I\GIIH SJ XLI 464 *SV ETTPMGEXMSRW VIUYMVMRK 4VSHYGXWMWHIXIVQMRIHXSFIHEXISJVIGIMTXSJ4VSHYGXF]XLIIRH
TIVQMWWMFPI EZIVEKI SYXTYX LMKLIV XLER WXEXIH E GYWXSQIV
'34VEXMRKWLSYPHFIYWIH
'YQQMRW4S[IV+IRIVEXMSR
0MQMXIH8MQI 6YRRMRK 4S[IV 084 MW HIJMRIH EW 6IWTSRWMFMPMXMIW
XLI QE\MQYQ TS[IV EZEMPEFPI YRHIV XLI EKVIIH -R XLI IZIRX SJ E JEMPYVI SJ XLI 4VSHYGX HYVMRK XLI
STIVEXMRK GSRHMXMSRW JSV [LMGL XLI KIRIVEXMRK WIX MW [EVVERX] TIVMSH HYI XS HIJIGXW MR QEXIVMEP SV
GETEFPISJHIPMZIVMRKJSVYTXSLSYVWSJSTIVEXMSR [SVOQERWLMT'YQQMRW4S[IV+IRIVEXMSR [MPPSRP]
TIV]IEV FIVIWTSRWMFPIJSVXLIJSPPS[MRKGSWXW
)QIVKIRG]7XERHF]4S[IV)74 MWHIJMRIHEWXLI %PP TEVXW ERH PEFSV VIUYMVIH XS VITEMV XLI
QE\MQYQTS[IVEZEMPEFPIHYVMRKEZEVMEFPIIPIGXVMGEP 4VSHYGX
TS[IV WIUYIRGI YRHIV XLI WXEXIH STIVEXMRK 6IEWSREFPI XVEZIPI\TIRWIWXS ERHJVSQXLI
GSRHMXMSRW JSV [LMGL E KIRIVEXMRK WIX MW GETEFPI SJ 4VSHYGXWMXIPSGEXMSR
HIPMZIVMRK MR XLI IZIRX SJ E YXMPMX] TS[IV SYXEKI SV 1EMRXIRERGI MXIQW XLEX EVI GSRXEQMREXIH SV
YRHIVXIWXGSRHMXMSRWJSVYTXS LSYVWSJSTIVEXMSR HEQEKIHF]E[EVVERXEFPIJEMPYVI
TIV]IEV8LITIVQMWWMFPIEZIVEKITS[IVSYXTYXSZIV
LSYVW SJ STIVEXMSR WLEPP RSX I\GIIH SJ XLI 3[RIV6IWTSRWMFMPMXMIW
)74 8LIS[RIV[MPPFIVIWTSRWMFPIJSVXLIJSPPS[MRK
)JJIGXMZI(EXI 4EKISJ %9-WWYI

2SXMJ]MRK 'YQQMRW 4S[IV +IRIVEXMSR (EQEKI XS TEVXW JM\XYVIW LSYWMRKW
HMWXVMFYXSV SV HIEPIV [MXLMR HE]W SJ XLI EXXEGLQIRXW ERH EGGIWWSV] MXIQW XLEX EVI
HMWGSZIV]SJJEMPYVI RSXTEVXSJXLIKIRIVEXMRKWIX
-RWXEPPMRK STIVEXMRK GSQQMWWMSRMRK ERH
QEMRXEMRMRK XLI 4VSHYGX MR EGGSVHERGI [MXL 8LMW PMQMXIH [EVVERX] HSIW RSX GSZIV GSWXW VIWYPXMRK
'YQQMRW 4S[IV +IRIVEXMSR vW TYFPMWLIH JVSQ
TSPMGMIWERHKYMHIPMRIW (MJJMGYPX]MRKEMRMRKEGGIWWXSXLI4VSHYGX
4VSZMHMRK IZMHIRGI JSV HEXI SJ (EQEKIXSGYWXSQIVTVSTIVX]
GSQQMWWMSRMRK
4VSZMHMRKWYJJMGMIRXEGGIWWXSERHVIEWSREFPI %w(EXEGIRXIVxMWHIJMRIHEWEHIHMGEXIHJEGMPMX]XLEX
EFMPMX] XS VIQSZI XLI 4VSHYGX JVSQ XLI LSYWIGSQTYXIVWERHEWWSGMEXIHIUYMTQIRXJSVHEXE
MRWXEPPEXMSR MR XLI IZIRX SJ E [EVVERXEFPI WXSVEKIERHHEXELERHPMRK
JEMPYVI
-RGVIQIRXEP GSWXW ERH I\TIRWIW EWWSGMEXIH 6IPMEFPI YXMPMX] MW HIJMRIH EW YXMPMX] TS[IV [MXLSYX
[MXL 4VSHYGX VIQSZEP ERH VIMRWXEPPEXMSR VSYXMRISVVIKYPEVP]WGLIHYPIHFPEGOSYXW
VIWYPXMRKJVSQRSRWXERHEVHMRWXEPPEXMSRW
'SWXW EWWSGMEXIH [MXL VIRXEP SJ KIRIVEXMRK 4PIEWI GSRXEGX ]SYV PSGEP 'YQQMRW 4S[IV
WIXW YWIH XS VITPEGI XLI 4VSHYGX FIMRK +IRIVEXMSR (MWXVMFYXSV JSV GPEVMJMGEXMSR GSRGIVRMRK
VITEMVIH XLIWIPMQMXEXMSRW
'SWXW EWWSGMEXIH [MXL PEFSV SZIVXMQI ERH
TVIQMYQWLMTTMRKVIUYIWXIHF]XLIS[RIV '911-27 43;)6 +)2)6%8-32 6-+,8 83
%PP HS[RXMQI I\TIRWIW JMRIW EPP ETTPMGEFPI *%-0)('31432)287
XE\IW ERH SXLIV PSWWIW VIWYPXMRK JVSQ E
[EVVERXEFPIJEMPYVI *EMPIH GSQTSRIRXW GPEMQIH YRHIV [EVVERX] VIQEMR
XLI TVSTIVX] SJ 'YQQMRW 4S[IV +IRIVEXMSR
0MQMXEXMSRW 'YQQMRW4S[IV+IRIVEXMSR LEWXLIVMKLXXSVIGPEMQ
8LMWPMQMXIH[EVVERX]HSIWRSXGSZIV4VSHYGXJEMPYVIW ER] JEMPIH GSQTSRIRX XLEX LEW FIIR VITPEGIH YRHIV
VIWYPXMRKJVSQ [EVVERX]
-RETTVSTVMEXI YWI VIPEXMZI XS HIWMKREXIH
TS[IVVEXMRK )\XIRHIH;EVVERX]
-RETTVSTVMEXI YWI VIPEXMZI XS ETTPMGEXMSR 'YQQMRW4S[IV+IRIVEXMSR SJJIVWWIZIVEPPIZIPWSJ
KYMHIPMRIW )\XIRHIH ;EVVERX] 'SZIVEKI 4PIEWI GSRXEGX ]SYV
-RETTVSTVMEXI YWI SJ ER )4%7) ETTPMGEXMSR
PSGEP 'YQQMRW 4S[IV +IRIVEXMSR (MWXVMFYXSV JSV
KIRIVEXSVWIXVIPEXMZIXS)4%vWWXERHEVHW HIXEMPW
2SVQEP[IEVERHXIEV [[[TS[IV GSQ
-QTVSTIVERHSVYREYXLSVMÎHMRWXEPPEXMSR
2IKPMKIRGIEGGMHIRXWSVQMWYWI 8,);%66%28-)77)8*368,,)6)-2%6)8,)
0EGOSJQEMRXIRERGISVYREYXLSVMÎHVITEMV 730) ;%66%28-)7 1%() &= '911-27
2SRGSQTPMERGI [MXL ER] 'YQQMRW 4S[IV 43;)6 +)2)6%8-32 -2 6)+%6( 83 8,)
+IRIVEXMSR TYFPMWLIHKYMHIPMRISVTSPMG] 463(9'8 '911-27 43;)6 +)2)6%8-32
9WI SJ MQTVSTIV SV GSRXEQMREXIH JYIPW 1%/)723 38,)6 ;%66%28-)7 )<46)77 36
GSSPERXWSVPYFVMGERXW -140-)( 36 3* 1)6',%28%&-0-8= 36
-QTVSTIV WXSVEKI FIJSVI ERH EJXIV *-82)77*36%4%68-'90%6496437)
GSQQMWWMSRMRK
3[RIVvW HIPE] MR QEOMRK 4VSHYGX EZEMPEFPI -2 23 ):)28 -7 '911-27 43;)6
EJXIVRSXMJMGEXMSRSJTSXIRXMEP4VSHYGXTVSFPIQ +)2)6%8-32 0-%&0) *36 -2'-()28%0 36
6ITPEGIQIRX TEVXW ERH EGGIWWSVMIW RSX '327)59)28-%0(%1%+)7
EYXLSVMÎHF]'YQQMRW4S[IV+IRIVEXMSR
9WISJ&EXXPI7LSVX1SHI 8LMW PMQMXIH [EVVERX] WLEPP FI IRJSVGIH XS XLI
3[RIVSVSTIVEXSVEFYWISVRIKPIGXWYGLEW QE\MQYQ I\XIRX TIVQMXXIH F] ETTPMGEFPI PE[ 8LMW
STIVEXMSR [MXLSYX EHIUYEXI GSSPERX SV PMQMXIH [EVVERX] KMZIW XLI S[RIV WTIGMJMG VMKLXW XLEX
PYFVMGERXW SZIVJYIPMRK SZIVWTIIHMRK PEGO SJ QE] ZEV] JVSQ WXEXI XS WXEXI SV JVSQ NYVMWHMGXMSR XS
QEMRXIRERGI XS PYFVMGEXMRK GSSPMRK SV EMV NYVMWHMGXMSR
MRXEOI W]WXIQW PEXI WIVZMGMRK ERH
QEMRXIRERGI MQTVSTIV WXSVEKI WXEVXMRK
[EVQYTVYRMRSVWLYXHS[RTVEGXMGIWSVJSV 4VSHYGX1SHIP2YQFIVCCCCCCCCCCCCCCCCCCCCCCC
TVSKVIWWMZI HEQEKI VIWYPXMRK JVSQ E 4VSHYGX7IVMEP2YQFIVCCCCCCCCCCCCCCCCCCCCCCCC
HIJIGXMZIWLYXHS[RSV[EVRMRKHIZMGI (EXIMR7IVZMGICCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
)JJIGXMZI(EXI 4EKISJ %9-WWYI

Generator SNF Submittal (Generator Cummins)

Uploaded by

Copyright:

Available Formats

Generator SNF Submittal (Generator Cummins)

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Generator SNF Submittal (Generator Cummins)

Uploaded by

Copyright:

Available Formats

Project : ^ŬŝůůĞĚEƵƌƐĞƌǇ&ĂĐŝůŝƚǇ

Subject : Technical Submittal for Genset moĚĞůϭϲϳϱϱ

The power of diesel

See a timeline of our history in the Sustainability Progress Report

 Embraced the stakeholder model

 Integrated values into the fabric of our

190 58,600 1.3M+

Distribution, Europe/CIS, 11%

2017 Sales: $20.4B 2017 EBIT1: $2.5B 2017 EBIT %: 12.2%

Technology Leadership Leverage our

Distribution Network Increase

Engine Power Components Distribution Electrified

Provides diesel and natural gas high-

Develops A/C generator / alternator products

Provides an integrated system for

Sales – Offering a complete range of Cummins

Energy storage New prime mover

Distributed power Alternative fuels

Advanced manufacturing & materials Powertrain integration & electrification

GLOBAL PRIORITY AREAS

GLOBAL STRATEGIC INITIATIVES

• Cummins Powers Women

VICE PRESIDENT & CHIEF TECHNICAL OFFICER JENNIFER RUMSEY

55 Employees Organization Target

CQ Distributor Starting Date

Location Completion Date

 Managed under Cummins Diesel International until

1987, followed by Central Area Org until 2000

Cummins in Middle East

 Grew to network of sixteen independent distributors

 Cummins Middle East FZE est. 2000

 Middle East Regional Distribution Organization (RDO)

 Cummins Qatar JV Distribution est. 2012

 1992 Cummins Power Gen In dependent

 2000 Cummins Middle East Dealer Whole goods

 2012 Cummins Qatar was established

Cummins Scope of Work :

Rated Power : 8.8MW – 11MVA

Client: Qatar Foundation

Cummins Scope of Work:

Rated Power : 4MW – 5MVA

Cummins Scope of Work:

Rated Power : 10.8MW – 13.5MVA

Rated Power : 9.0MW – 11.250MVA

Client: Doha New Port

Rated Power : 9 MW – 10 MVA

Client Name: Doha New Port

Rated Power : 14 MW – 17.5 MVA

Client Name: Private Engineering office

Rated Power : 12 MW – 15 MVA

Client Name: Private Engineering Office

Rated Power : 12 MW – 15 MVA

Client Name: Qatar Tourism Authority

Rated Power : 6MW – 7.5 MVA

Rated Power : 8.1MVA (6.4MW)

Rated Power : 12.5MVA (10MW)

Rated Power : 11.3MVA (9MW)

Rated Power : 3 MVA (2.4MW)

 Cummins Middle East Scope includes the following:

1 Aftermarket Org Structure

Subject : Technical Submittal for Genset moĚĞůϭϲϳϱϱ

Embraced the stakeholder model

Integrated values into the fabric of our

Managed under Cummins Diesel International until

Grew to network of sixteen independent distributors

Cummins Middle East FZE est. 2000

Middle East Regional Distribution Organization (RDO)

Cummins Qatar JV Distribution est. 2012

1992 Cummins Power Gen In dependent

2000 Cummins Middle East Dealer Whole goods

2012 Cummins Qatar was established

Cummins Middle East Scope includes the following:

W5. + W5. W5. + W5.

0 SAT Testing at site using Resistive (1pf) load bank for 02

^ͲDϯ ϮϴϬ͘ϴϵ ϭϲϴ͘ϱϯ ϮϴϬ͘ϴϵ ϭϲϴ͘ϱϯ ϮϬй

^Ͳ'WdKd> ϮϬϲ͘ϬϬ ϭϴϱ͘ϰϬ ϴϰϭ͘ϬϬ ϱϬϰ͘ϱϵ ϯϳϳ͘ϲϱ ϭϴϴ͘ϴϯ ϭϰϮϰ͘ϲϱ ϴϳϴ͘ϴϮ

ĞŵĂŶĚĨĂĐƚŽƌ Ϭ͘ϵϬ Ϭ͘ϯϬ Ϭ͘ϰϬ Ϭ͘ϲϬ Ϭ͘ϱϬ Ϭ͘ϲ