Model BG01 & BG34

Download as pdf or txt
Download as pdf or txt
You are on page 1of 12

Skimall® Tube Type Oil Skimmer

Process Overview

Oil flows down


Skimall® Model BG01 or BG34
the face of the
skimmer and into
Oil Skimmer
a sludge pan that
is plumbed to a
barrel.

1.0” or 3/4” TigerTube® Collector


Tube

Clean TigerTube®
returns to the water Collector tube is driven in a
to remove more oil. continuous loop by the skimmer.

Oil coats the outside of


the collector tube and is
pulled into the skimmer.
Skimall® Tube Type Oil Skimmer
Process Overview

Oil Scraped Off Collector


Tube And Pulley Wheel Flows
To Sludge Pan

Oil Coats Collector Tube

Installation - Customer Site


Skimall® Model BG01 & BG34 Oil Skimmer

Model BG01 & BG34 Oil Skimmer Front Safety Cover With Dureon®
shown without front safety cover. Scraper and Pressure Blocks.

Model BG01 & BG34 Oil Skimmer Shown On Angle Frame Mount

Optional Sludge Pan

Optional Angle Frame Mount


Skimall® Model BG01 & BG34 Oil Skimmer

Model BG01 & BG34 Drive System


(shown with rear safety cover removed)

Cast Aluminum Main Frame

Lubed For Life Bearings

Direct Drive Motor Coupling

Industrial Belt Drive

Stainless Steel Shafts

Heavy Duty Lubed For Life Gear Reducer

Model BG01 & BG34 Access Safety Covers

Rear Access Safety Cover

Front Access Safety Cover


Skimall® Model BG01 & BG34 Oil Skimmer

Oil Skimmer Features


• Front Safety Guard with integral abrasive resistant Dureon® tube scraper
and pressure blocks.
• Designed for maximum safety - when Front Safety Guard is removed, all
energy is released from the TigerTube® collector tube and pinch points are
eliminated. System will not operate properly without the Front Safety
Guard in place.
• Lubed for life gear reducer.
• Drive Wheel and Pulley Wheel with Dureon® replaceable rings.
• Drive Wheel and Pulley Wheel quick release coupling.
• Belt drive system.
• Rear Safety Cover for easy access to drive system.
• 1/2 HP 115/230 or 230/460V, 1 phase or 3 phase motor available.
• Rugged cast aluminum main frame.
• BG01 uses 1.0” TigerTube® collector tube.
• BG34 uses 3/4” TigerTube® collector tube.
• Proudly made in the USA.
Skimall® Model BG01 & BG34 Oil Skimmer
Features

1.0” or 3/4” TigerTube® Collector Tube

Drive Wheel Pulley Wheel

Drive Wheel Safety Guard & Drip Tray


Skimall® Model BG01 & BG34 Oil Skimmer
Features

Dureon® Replaceable Wear Rings

Drive Wheel Arrangement Pulley Wheel Arrangement


Skimall® Model BG01 & BG34 Oil Skimmer
Features

Lower Dureon®
Scraper Tension Tube Scraper
Adjustment

Pulley Wheel Scraper


Skimall® Model BG01 & BG34 Oil Skimmer
Features

Quick Connect & Release Coupling


Skimall® Model BG01 & BG34 Oil Skimmer

Rear Safety Guard

Lubed For Life Gear Reducer

1/2HP 115/230V or 230/460V Motor


Single or Three Phase
Explosion Proof Available

Upper Dureon® Collector Tube Scraper

Dureon® Collector Tube Pressure Blocks

Front Safety Guard


Skimall® Model BG01 & BG34 Oil Skimmer

TigerTube® Installation

Lay tube on Skimall® unit as shown in the above


photo. After tube is in position lower the front guard from
the top down so that that upper scraper lays on the top
of the tube and secure the fasteners lining up the holes of
the guard with the frame.
Skimall® Model BG01 & BG34 Oil Skimmer
Advantages

• Collector tube floats - will not reintroduce oil back into water.
• Large surface area coverage.
• Designed for years of operation.
• No regular maintenance required.
• Designed for 24/7 continuous use.
• Dirt, grit, and other abrasive material will not harm the system.
• Easy to install.
• Dureon® Scrapers and Pressure Blocks will not chip, crack or break.
• No additional lubrication required.
• Drive Wheel single piece Dureon® rings - no individual fingers to replace.
• Pulley Wheel with single piece Dureon® rings - no need to replace entire wheel.
• Lubed for life gear reducer and bearings - never requires complete disassembly
to maintain.
• Belt drive system - no lubrication required, no chain to maintain.
• Direct drive motor coupling to gear reducer - no weak rubber coupling.
• Quick connect and release Drive and Pulley Wheel coupling - no special tools
required.
• Collector tube scraper tension adjustment.
• Drive Wheel safety guard and drip tray - safe, clean operation.
• Performance and Quality Guarantee.

You might also like