For More Information Please Call 1-800-Belden1: 8760 Multi-Conductor - Shielded Twisted Pair Cable

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Detailed Specifications & Technical Data

ENGLISH MEASUREMENT VERSION

8760 Multi-Conductor - Shielded Twisted Pair Cable

For more Information


please call

1-800-Belden1

General Description:
18 AWG stranded (16x30) tinned copper conductors, polyethylene insulation, twisted pair, overall Beldfoil®
shield (100% coverage), 20 AWG stranded tinned copper drain wire, PVC jacket.
Physical Characteristics (Overall)
Conductor
AWG:
# Pairs AWG Stranding Conductor Material
1 18 16x30 TC - Tinned Copper

Total Number of Conductors: 2

Insulation
Insulation Material:
Insulation Material Wall Thickness (in.)
PO - Polyolefin 0.018

Outer Shield
Outer Shield Material:
Outer Shield Trade Name Type Outer Shield Material Coverage (%)
Beldfoil® Tape Aluminum Foil-Polyester Tape w/Shorting Fold 100

Outer Shield Drain Wire AWG:


AWG Stranding Drain Wire Conductor Material
20 7x28 TC - Tinned Copper

Outer Jacket
Outer Jacket Material:
Outer Jacket Material Nom. Wall Thickness (in.)
PVC - Polyvinyl Chloride 0.028

Overall Cable
Overall Nominal Diameter: 0.222 in.

Pair
Pair Color Code Chart:
Number Color
1 Black & Clear

Mechanical Characteristics (Overall)


Operating Temperature Range: -20°C To +60°C

Bulk Cable Weight: 25 lbs/1000 ft.

Max. Recommended Pulling Tension: 54 lbs.

Min. Bend Radius/Minor Axis: 2.250 in.

Applicable Specifications and Agency Compliance (Overall)


Applicable Standards & Environmental Programs
NEC/(UL) Specification: CM

CEC/C(UL) Specification: CM

AWM Specification: UL Style 2092 (300 V 60°C)

EU Directive 2011/65/EU (ROHS II): Yes

EU CE Mark: Yes

EU Directive 2000/53/EC (ELV): Yes

EU Directive 2002/95/EC (RoHS): Yes

EU RoHS Compliance Date (mm/dd/yyyy): 01/01/2004

EU Directive 2002/96/EC (WEEE): Yes

Page 1 of 2 10-17-2016
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION

8760 Multi-Conductor - Shielded Twisted Pair Cable

EU Directive 2003/11/EC (BFR): Yes

CA Prop 65 (CJ for Wire & Cable): Yes

MII Order #39 (China RoHS): Yes

Flame Test
UL Flame Test: UL1685 UL Loading

Suitability
Suitability - Indoor: Yes

Plenum/Non-Plenum
Plenum (Y/N): No

Plenum Number: 88760, 87760 or 82760

Electrical Characteristics (Overall)


Nom. Inductance:
Inductance (µH/ft)
.18

Nom. Capacitance Conductor to Conductor:


Capacitance (pF/ft)
27.200

Nom. Conductor DC Resistance:


DCR @ 20°C (Ohm/1000 ft)
6.5

Max. Operating Voltage - UL:


Voltage
300 V RMS

Max. Recommended Current:


Current
7.2 Amps per conductor @ 25°C

Put Ups and Colors:

Item # Putup Ship Weight Color Notes Item Desc


8760 060U1000 1,000 FT 27.000 LB CHROME 2 #18 LDPE SH PVC
8760 060U500 500 FT 14.000 LB CHROME 2 #18 LDPE SH PVC
8760 0601000 1,000 FT 27.000 LB CHROME 2 #18 LDPE SH PVC
8760 06010000 10,000 FT 270.000 LB CHROME CY 2 #18 LDPE SH PVC
8760 06010001 10,000 FT 270.000 LB CHROME CZ 2 #18 LDPE SH PVC
8760 06015000 15,000 FT 435.000 LB CHROME CY 2 #18 LDPE SH PVC
8760 0602000 2,000 FT 54.000 LB CHROME C 2 #18 LDPE SH PVC
8760 060250 250 FT 7.000 LB CHROME 2 #18 LDPE SH PVC
8760 060500 500 FT 14.000 LB CHROME C 2 #18 LDPE SH PVC
8760 0605000 5,000 FT 145.000 LB CHROME C 2 #18 LDPE SH PVC

Notes:
C = CRATE REEL PUT-UP.
Y = FINAL PUT-UP LENGTH MAY VARY -10% TO +20% FROM LENGTH SHOWN.MAY CONTAIN 2 PIECES. MINIMUM LENGTH OF ANY ONE PIECE IS 1500'.
Z = FINAL PUT-UP LENGTH MAY VARY (+ OR -) 10% FOR SPOOLS OR REELS AND(+ OR -) 5% FOR UNREEL CARTONS FROM LENGTH SHOWN.

Revision Number: 3 Revision Date: 08-02-2012

© 2016 Belden, Inc


All Rights Reserved.
Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to
change without notice, and the listing of such information and specifications does not ensure product availability.
Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for
any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether
in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with EU RoHS (Directive 2002/95/EC, 27-Jan-2003). Material manufactured prior to the compliance date may be in stock at Belden facilities
and in our Distributor’s inventory. The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is
correct to the best of Belden’s knowledge, information, and belief at the date of its publication. The information provided in this Product Disclosure is designed only as a general guide for the
safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification.
Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the
product.
Belden declares this product to be in compliance with EU LVD (Low Voltage Directive 2014/35/EU).

Page 2 of 2 10-17-2016

You might also like