CAMERON Fully Welded Ball Valves

Engineered for heavy duty, limited maintenance performance, with the strength of forged
components and a lightweight, compact, spherical design
Table of Contents

CAMERON FULLY WELDED BALL VALVES

Introduction ......................................................................................... 2
Features and Benefits ........................................................................... 3
Standard Seat Design ............................................................................ 6
Alternate Seat Design ........................................................................... 7

Accessories ........................................................................................... 8
How to Order ....................................................................................... 9

Standards, Specifications and Materials ................................................. 10

Dimensions ........................................................................................... 12
ASME /ANSI Class 150 to 2500 (PN 20 to PN 420)

Full and Reduced Port Valves........................................................... 12

API Pressure Class 2000, 3000 and 5000 psi

Full Port Valves................................................................................ 25

Reduced Port Valves........................................................................ 26
Dimensional Data.................................................................................. 27
Top Works Dimensions .......................................................................... 28
Top Works Dimensions – Manual Gear Dimensions ............................... 30
Services for Valves and Actuation .......................................................... 31
Trademark Information ......................................................................... 32

1
 CAMERON Fully Welded Ball Valves

Ville Platte, La., USA

Cameron is a leading provider of valve, valve automation and measurement systems to the oil
and gas industry. Our products are primarily used to control, direct and measure the flow of
oil and gas as it is moved from individual wellheads through flowlines, gathering lines and
transmission systems to refineries, petrochemical plants and industrial centers for processing.

Cameron provides a wide range of valves for use in natural gas, LNG, crude oil and refined
products transmission lines. Cameron, looking to strengthen its single source capabilities for a
wide scope of customer requirements, has acquired the traditional CAMERON® fully welded
ball valve product line with the GROVE®, RING-O®, TOM WHEATLEY®, ENTECH™ and TK®
product lines. Cameron also provides critical service valves for refinery, chemical and
petrochemical processing businesses, and for associated storage terminal applications,
particularly through the ORBIT® and GENERAL VALVE® product lines. These brands are
complemented by WKM®, TBV™, and TEXSTEAM™ valve products and considerably expand
the scope of our product offerings.

2
FEATURES AND BENEFITS

As one of the most trusted valves in the petroleum Engineered for heavy-duty, maintenance-free performance,
industry, the CAMERON fully welded ball valve combines the CAMERON fully welded ball valve is commonly
the strength of forged components with a lightweight selected for a number of applications, including:
and compact spherical design. • Gas transmission • NGL plants
CAMERON fully welded ball valves satisfy ASME/ANSI • Product pipelines • NGL pipeline
150 to 2500 (PN 20 to PN 420) and API 2000 to 5000 • Measurement skids • Compressor stations
standards. Made of forged steel to ensure uniform fine • Dehydration systems • CO2 services
grain structure and toughness, they can be specified in • Gas separation systems • Offshore
sizes from 2” to 56” (50 mm to 1400 mm).
• Natural gas storage • Subsea
• Dryer service

The distinctive design of the CAMERON fully welded ball valve gives it strength at reduced weight, as well as resistance to
both pipeline pressures and stresses. The compact, spherical design also eliminates body flanges, reducing overall size and
potential leak paths.

PTFE lip seal

Forged body and ball provides superior
ductility and strength for added safety

PTFE delta seal

Stem sealant injection Compact body design gives increased

strength with reduced weight

Floating seat ring with seat to ball seal

(Various seat arrangements available
on pages 6 and 7)

Sealant port with check valve permits safe

injection of sealant for fast, simple
restoration of tight shutoff

Body bleed fitting allows double

block-and-bleed testing of valve seals in Trunnions encased in PTFE impregnated
either open or closed position stainless steel bearings for smooth
operation without lubrication

3
FEATURES AND BENEFITS (CONT.)
Replace Stem Seal
In the unlikely event of a stem seal needing replacement, Standards and Specifications*
it can be accomplished safely with the valve in service. Sizes
With the body cavity vented, all line pressure to the stem • 2” to 56” (50 mm to 1400 mm) full, reduced and
venturi bore
area also is vented. Please contact your sales
representative to obtain maintenance procedures. Pressure Classes
• ASME/ANSI Class 150 to 2500 (PN 20 to PN 420),
Safeguard Downstream Work API 2000 to 5000 psi
With the valve closed and the vent fitting open, the
Operating Temperatures
possibility of the line media reaching a work area is
• From -50° F to 375° F (-46° C to 190° C)
reduced.
End Connections
Fire-Tested for Safety • Flanged, weld and weld-by-flange and more
CAMERON fully welded ball valves can be supplied to
Body Styles
API 6FA, API 607 and ISO 10497 standards. If industry • Fully welded
standards change or customer requirements vary from
the above, please contact your sales representative. Standard Material
• Forged carbon steel

Optional Materials
• Seat/seal trim options include: regular, corrosion-
resistant and sour (NACE MR0175)

* See page 10 for specification details.

4
Stem Seals
Delta seals and lip seals made of PTFE are incorporated in the upper stem area.
PTFE is a low-friction, non-deteriorating material that is not subjected to rapid
decompression explosion. Most valve sizes have a provision for the sealant
injection to establish a secondary seal.

Trunnion Mounted Ball Allows Low-Torque Operation

Regardless of size or pressure rating, every CAMERON fully welded ball valve is
trunnion mounted. High-strength forged stems are located in PTFE
impregnated stainless steel bearings for smooth, accurate operations. Trunnion
mounted stems absorb the thrust from line pressure, preventing excess friction
between the ball and seats, so even at full rated working pressure, operating
torque stays low.

Double Block-and-Bleed
Whether in the fully open or fully closed position, pressure on each side of the
ball is blocked from the body cavity by the seat ring. The body cavity can then
be bled down or drained through the body port. When you block-and-bleed a
CAMERON ball valve, the following can be accomplished:

Test Valve Integrity

When the valve body is vented, the seat seal’s integrity is verified. This test can
be performed with the valve open or closed. Valve performance can also be
validated by verifying valve seat seal integrity.

Secondary Seat Seal

The sealant injection system provides a fast, simple way of restoring tight
shutoff if any foreign object should damage the sealing surfaces. The injection
system can also be used for routine flushing of the seat ring area in services
where this may be required.

5
STANDARD SEAT DESIGN
In service since the early 1960s, the standard seat
arrangement has proven itself to be of sound design.
This arrangement is available in all CAMERON fully
welded ball valves and includes the features and benefits
indicated on the preceding pages.

Features and Benefits

Upstream Sealing
At low pressure, seat-to-ball contact is maintained by
Belleville springs. At higher pressures, seat contact is
reinforced by line pressure.

Automatic Internal Relief of Body Pressure

Relief of excess body cavity pressure is automatic,
avoiding dangerous pressure buildup. Any pressure
exceeding downstream line pressure by approximately
200 psi pushes the downstream seat away from the ball,
allowing the pressure to relieve into the pipeline.
TRAPPED
LINE ESCAPING
Rotating Seat Rings PRESSURE
LINE
PRESSURE
PRESSURE
The exclusive rotating seat feature is standard in the
CAMERON fully welded ball valve size 14” (350 mm)
and larger. Both seats rotate 15 degrees each time the
valve is closed, exposing a new pinch point and evenly
distributing seat wear.

Distributed Seat Wear

The pinch point is the area of the seat insert that
experiences an increased velocity when the valve is
seated closed and unseated open. This is where the seat
seal experiences the most wear, and in most valves
where a leak path begins. By rotating the seat ring, the
pinch point wear is distributed throughout the seat seal
providing a substantial increase in seat life.

Prevents Buildup
In some services, a valve can experience harmful
sediment buildup around the seat ring. This can cause
the seat to stick and not seal properly. The CAMERON
fully welded ball valve, with exclusive rotating seat, can
handle these harsher services. As the seat rotates, it will
prevent any buildup or break up existing buildup.

6
ALTERNATE SEAT DESIGN
The valve is available with double-acting and metal-to-
metal seats to accommodate a variety of applications and
customer preferences.

Double Acting
Conventional Upstream Sealing
With the upstream pressure, the bi-directional body-to-
seat seal is pushed toward the front sealing face of its
retaining pocket. This creates an unbalanced pressure
annulus between the body seal and the ID of the seat
insert, forcing the seat insert against the ball.

Downstream Sealing
With the downstream pressure, the bi-directional body-
to-seat seal is pushed toward the back sealing face of its
retaining pocket. This creates an unbalanced pressure
annulus between the OD of the seat insert and the body
seal diameter, also forcing the seat insert against the ball.

Standards and Specifications

Double Acting – T32
Sizes
• 8” to 48” (200 mm to 1200 mm)

Pressure Classes
• ASME/ANSI Class 150 to 900 (PN 20 to PN 150)

Operating Temperatures
• -50° F to 250° F (-46° C to 121° C)

7
ACCESSORIES
Accessories are available to improve the CAMERON fully
welded ball valve’s adaptability in a variety of situations.

High Head for Remote Operation

For situations in which the CAMERON fully welded ball
valve must be underground, the CAMERON high head
makes the controls accessible above ground. Designed
and constructed to withstand harsh environments, it has
proven itself in uses all over the world for many years.

Subsea Design Offers Important Benefits

For the same reliable performance offshore and onshore,
the CAMERON fully welded ball valve is available with a
coating and actuation designed specifically for the
demands of a subsea environment.

Right Angle Improves Flexibility

CAMERON fully welded ball valves can be specified for
tight spaces when fitted with a CAMERON right angle
extension. The valve control is turned 90 degrees from its
usual position, allowing more space at the top of the
valve and better access by operators.

8
HOW TO ORDER
Specify the following when ordering a Specify the following when ordering
CAMERON fully welded ball valve: another manufacturer’s power operator
1. Valve figure number (see chart below) to fit a CAMERON fully welded ball valve:
2. Pressure classification (ASME/ANSI 600 lb, API 3000 psi) 1. Valve size and pressure class and, if for field
conversion, the present operator
3. End and bore sizes
2. Maximum differential pressure across valve during operation
4. Type of end connections (unequal ends can be furnished).
and any abnormal operating conditions
For weld end valves, specify ID or OD, wall thickness and
grade of pipe 3. Speed of opening and closing, probable
frequency of operation
5. Type of operator
4. Type operator desired (electric, hydraulic,
6. Stem extension, if desired. Specify distance from valve
pneumatic)
centerline to center of handwheel, or top of power operator
mounting flange 5. Information on operating medium. (If electric: voltage,
frequency, single- or three-phase, open- or explosion-proof
7. Type of trim or application
motor. If hydraulic or pneumatic: operating medium and
Note: Specify any desired accessories, if desired (lifting eyes, pressure.)
locking devices, and more). Handwheels are included with
6. Accessories and controls (limit switches, valving,
valves. Operating levers must be ordered separately. Information
instrumentation, tanks, pumps, etc)
on special trims and API configurations are available upon
request

80 06 0 1 - 2 - 1

Classification Pressure Classification Bore End Connections Operator Trim

80 API 6D 01 ASME/ANSI 150 0 Full 1 Lever 1 Standard (150 to 1500)

81 API 6A 03 ASME/ANSI 300 7 Reduced 1A Extension lever 2 Standard API (2000 to 5000)
82 AFNOR 04 ASME/ANSI 400 4 Venturi 2 Worm gear 4 High-temp Teflon (150 to 600)
83 DIN 06 ASME/ANSI 600 9 All Others 2A Extension worm gear 8 Low-temp Nylon (150 to 2500)
84 UNI 09 ASME/ANSI 900 4 Subsea gear 123 Pressure regulating
(150 to 1500)
15 ASME/ANSI 1500 4A Subsea gear 300 feet +
212 NACE (150 to 2500)
25 ASME/ANSI 2500 7 Direct stem
1 RF/RF 213 NACE (2000 to 5000)
20 API 2000 7A Extension direct stem
2 WE/WE 214 Tefzel/NACE (150 to 1500)
30 API 3000 8 Worm gear/adapted
3 RF/WE 215 Tefzel/NACE (2000 to 5000)
50 API 5000 8A Extension worm
4 RTJ/RTJ gear/adapted 216 NACE/Low-temp (150 to 2500)
5 RTJ/WE 22 Square 217 NACE/Low-temp (2000 to 5000)
9 All Others 22A Extension square 222 NACE/High-temp (150 to 600)
Nut/Mtg/Flg
259 NACE/316 Inlay (150 to 2500)
23 Worm gear with 2”
square operating nut
23A Worm gear with right
angle pinion shaft
extension and 2”
square operating nut

9
STANDARDS, SPECIFICATIONS AND MATERIALS
CAMERON fully welded ball valves conform to one or Materials
more of the following specifications for pressure, Materials used in ball valve construction are equivalent
temperature ratings and dimensions: ASME/ANSI, ISO at all Cameron manufacturing plants. However, the
14313/API 6D, ISO 10423/API 6A, ISO 14723/API 6DSS, availability of local supplies, the need to conform to
DIN, AFNOR, British standards, ISO 9000 and API Q1. national standards and to offer various trims may
necessitate some variations. In corrosive applications,
valve trims may be offered using various types of alloys
and stainless steels. For more information on material
Trim Materials for Standard Valves
Pressure range ASME/ANSI Class 150 to 2500 (PN 20 to PN 420)
specifications and properties, contact your sales
Temperature range -20° F to 250° F (-29° C to 121° C) representative.
Body ASTM A350 Gr. LF-2(M)
End connection ASTM A350 Gr. LF-2(M) Torque Information
Ball ASTM A694 Gr. F50(M) Chrome plated or ENP
Contact your sales representative to obtain a copy of the
Seat ring AISI 1040
engineering bulletin, which provides detailed torque
Seat load spring AISI 1040
Stem seals PTFE
information for power actuators sizing.
Lip seals PTFE
Seat ring insert Nylon

Other trims are available upon request.

Optional Trim Materials

TRIM NUMBERS
Trim Pressure Rating Temperature Rating Regular Corrosion Resistant (NACE MR0175)
Standard ASME/ANSI Class 150 to 2500 -20° F to 250° F (-29° C to 121° C) 1 212
API 2000 to 5000 -20° F to 250° F (-29° C to 121° C) 2 213
Low-temperature ASME/ANSI Class 150 to 2500 -50° F to 250° F (-46° C to 121° C) 8 216
API 2000 to 5000 -50° F to 250° F (-46° C to 121° C) - 217
High-temperature ASME/ANSI Class 150 to 600 -20° F to 375° F (-29° C to 190° C) 4 222
Tefzel ASME/ANSI Class 150 to 1500 -20° F to 300° F (-29° C to 149° C) 140 214
(Acidizing) API 2000 to 5000 -20° F to 300° F (-29° C to 149° C) 108 215
Tefzel ASME/ANSI Class 150 to 1500 -50° F to 300° F (-46° C to 149° C) 223 -
Low-temperature API 2000 to 5000 -50° F to 300° F (-46° C to 149° C) - -
Duplex (Internal) stainless steel ASME/ANSI Class 150 to 1500 -20° F to 250° F (-29° C to 121° C) - 276
Full duplex stainless steel ASME/ANSI Class 150 to 1500 -50° F to 250° F (-46° C to 121°C) - 504

10
Dimensional Codes for Flanged and Weld Ends Dimensional Codes for Cameron Manual Operators
(Full and Reduced Openings)
Code Identification: Code Identification:
A End-to-end (length dimension) G Handwheel diameter
B Bore diameter H Center of bore to top of square nut for lever operated
C Centerline to bottom valves, center of bore to handwheel for gear operated valves

D1 Flange outside diameter L Center of bore to end of lever

D2 Flange inside dimension

E Sphere dimension

H
G

D1 D2 B
E H

SD-24027 SD-24028 SD-24029

11
DIMENSIONS
Full Bore ASME/ANSI Class 150 (PN 20)
L

H
G

D1 D2 B E H

Dimensions
Size in. Flanged End ■ Weld C.L. Diameter C.L. to Approximate
Body Lever
Ball RF RTJ End ■ to Handwheel Handwheel Valve Weight
Dia. Dia. Sphere Length
Nom Bore Stem Length Length Length Bottom for Gear C.L. lb
●
Dia. B Size A A D1 D2 A C E L G H Flange Weld
2 2.06 1.0 7.0 7.5 6.00 2.06 11.0◆ 3.94 5.00 24 - 6.34 39 45
3 3.13 1.0 8.0 8.5 7.50 3.13 12.5◆ 5.12 6.75 24 - 7.44 62 75
4 4.06 1.5 9.0 9.5 9.00 4.06 14.0 5.94 8.50 36 - 8.43 115 100
6 6.00 1.5 15.5 16.0 11.00 6.00 18.0 7.91 11.25 - 12 10.43 200 225
8 8.00 2.0 18.0 18.5 13.50 8.00 21.5◆ 10.00 15.50 - 18 12.55 428 450
10 10.00 2.0 21.0 21.5 16.00 10.00 23.5◆ 12.12 18.50 - 18 14.54 705 650
12 12.00 3.0 24.0 24.5 19.00 12.00 26.5◆ 14.50 22.36 - 18 20.14 1210 1100
14 13.25 3.0 27.0 27.5 21.00 13.25 28.5* 14.64 24.00 - 18 21.16 1330 1230
16 15.25 3.0 30.0 30.5 23.50 15.25 30.5* 16.01 26.32 - 18 22.52 1650 1550
18 17.25 4.0 34.0 34.5 25.00 17.25 33.5* 19.25 29.20 - 24 26.19 2325 2200
20 19.25 4.0 36.0 36.5 27.50 19.25 35.5* 20.81 32.27 - 18 27.75 3310 2760
22 21.25 4.0 40.0 40.5 29.50 21.25 38.5* 22.28 36.00 - 18 29.22 3875 3510
24 23.25 4.0 42.0 42.5 32.00 23.25 42.0* 23.69 38.76 - 18 30.63 4620 4260
26 25.00 5.0 45.0 - 34.25 25.00 44.5* 26.49 41.75 - 24 34.34 6400 5600
28 27.00 5.0 49.0 - 36.50 27.00 47.0* 27.88 44.86 - 24 35.72 7200 6500
30 29.00 5.0 51.0 - 38.75 29.00 49.0* 29.51 47.90 - 24 37.37 9500 8800
34 32.75 5.0 58.0 - 43.75 32.75 54.5* 32.16 53.64 - 30 40.01 13500 12000
36 34.50 5.0 60.0 - 46.00 34.50 56.5* 33.76 56.83 - 36 41.60 15150 14500
40 38.50 7.5 69.0 - 50.75 38.50 65.0* 40.14 65.00 - 30 50.25 - -
42 41.25 7.5 72.0 - 53.00 41.25 66.5* 41.78 68.60 - 42 51.89 - -
48 46.50 7.5 80.0 - 59.50 46.50 76.0* 45.90 77.00 - - - - -
Size mm kg
50 52 25 178 191 152 52 279◆ 100 127 610 - 161 18 20
80 80 25 203 216 191 80 318◆ 130 171 610 - 189 28 34
100 103 38 229 241 229 103 356 151 216 914 - 214 52 45
150 152 38 394 406 279 152 457 201 286 - 305 265 91 102
200 203 51 457 470 343 203 546◆ 254 394 - 457 319 194 204
250 254 51 533 546 406 254 597◆ 308 470 - 457 369 320 295
300 305 76 610 622 483 305 673◆ 368 568 - 457 512 549 499
350 337 76 686 699 533 337 724* 372 610 - 457 537 603 558
400 387 76 762 775 597 387 775* 407 669 - 457 572 748 703
450 438 102 864 876 635 438 851 489 742 - 610 665 1055 998
500 489 102 914 927 699 489 902 529 820 - 457 705 1501 1252
550 540 102 1016 1029 749 540 978* 566 914 - 457 742 1758 1592
600 591 102 1067 1080 813 591 1067* 602 985 - 457 778 2096 1932
650 635 127 1143 - 870 635 1130* 673 1060 - 610 872 2903 2540
700 686 127 1245 - 927 686 1194* 708 1139 - 610 907 3266 2948
750 737 127 1295 - 984 737 1245* 750 1217 - 610 949 4309 3992
850 832 127 1473 - 1111 832 1384* 817 1362 - 762 1016 6123 5443
900 876 127 1524 - 1168 876 1435* 858 1443 - 914 1057 6872 6577
1000 978 191 1753 - 1289 978 1651* 1020 1651 - 762 1276 - -
1050 1048 191 1829 - 1346 1048 1689* 1061 1742 - 1067 1318 - -
1200 1181 191 2032 - 1511 1181 1930* 1166 1956 - - - - -
■ Length (A) of a weld x flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
◆ Length exceeds specified dimensions in API 6D/ISO 14313.
● Dimensions of 22” (550 mm) flanges are per MSS-SP-44 and 26” (650 mm) to 42” (1050 mm) flanges are per ASME B16.47 series A.

12
Reduced Bore ASME/ANSI Class 150 (PN 20) L

H
G

D1 D2 B
E H

Dimensions
Size in. Flanged End ■ Weld Diameter C.L. to Approximate
C.L. to Body Lever
Ball RF RTJ End ■ Handwheel Handwheel Valve Weight
Dia. Dia. Bottom Sphere Length
Nom Bore Stem Length Length Length for Gear C.L. lbx
Dia. B Size A A D1● D2 A C E L G H Flange Weld
3 2.06 1.0 8.0 8.5 7.50 3.13 11.0◆ 3.94 5.00 24 - 6.34 55 50
4 3.13 1.0 9.0 9.5 9.00 4.06 12.5◆ 5.12 6.75 24 - 7.44 100 87
6 4.06 1.5 15.5 16.0 11.00 6.00 14.0◆ 5.94 8.50 36 - 8.43 170 150
8 6.00 1.5 18.0 18.5 13.50 8.00 18.0 7.91 11.25 - 12 10.43 345 290
10 8.00 2.0 21.0 21.5 16.00 10.00 21.5◆ 10.00 15.50 - 18 12.55 620 525
12 10.00 2.0 24.0 24.5 19.00 12.00 23.5◆ 12.12 18.50 - 18 14.54 950 840
14 12.00 3.0 27.0 27.5 21.00 13.25 26.5◆ 14.50 22.36 - 18 20.14 1280 1160
16 13.25 3.0 30.0 30.5 23.50 15.25 28.5* 14.64 24.00 - 18 21.16 1450 1330
18 15.25 3.0 34.0 34.5 25.00 17.25 30.5* 16.01 26.32 - 18 22.52 1510 1700
20 17.25 4.0 36.0 36.5 27.50 19.25 33.5* 19.25 29.20 - 24 26.19 2410 2300
22 19.25 4.0 40.0 40.5 29.50 21.25 35.5* 20.81 32.27 - 18 27.75 3450 3050
24 21.25 4.0 42.0 42.5 32.00 23.25 38.5* 22.28 36.00 - 18 29.22 4300 3650
26 23.25 4.0 45.0 - 34.25 25.00 42.0* 23.69 38.76 - 18 30.63 5400 5100
28 25.00 5.0 49.0 - 36.50 27.00 44.5* 26.49 41.75 - 24 34.34 7040 6100
30 27.00 5.0 51.0 - 38.75 29.00 47.0* 27.88 44.86 - 24 35.72 8900 7600
32 29.00 5.0 54.0 - 41.75 32.75 49.0* 29.51 47.90 - 24 37.37 9600 8500
36 32.75 5.0 60.0 - 46.00 34.50 54.5* 32.16 53.64 - 30 40.01 14000 12500
42 34.50 5.0 72.0 - 53.00 41.25 56.5* 33.76 56.83 - 36 41.60 - -
Size mm kg
80 52 25 203 216 191 80 279◆ 100 127 610 - 161 25 23
100 80 25 229 241 229 103 318◆ 130 172 610 - 189 45 39
150 103 38 394 406 279 152 356◆ 151 216 914 - 214 77 68
200 152 38 457 470 343 203 457 201 286 - 305 265 156 132
250 203 51 533 546 406 254 564◆ 254 394 - 457 319 281 238
300 254 51 610 622 483 305 597◆ 308 470 - 457 369 431 381
350 305 76 686 699 533 337 673◆ 368 568 - 457 512 581 526
400 337 76 762 775 597 387 724* 372 610 - 457 537 658 603
450 387 76 864 876 635 438 774* 407 669 - 457 572 685 771
500 438 102 914 927 699 489 851* 489 741 - 610 665 1093 1043
550 489 102 1016 1029 749 540 902* 529 820 - 457 705 1565 1383
600 540 102 1067 1080 813 591 978* 566 914 - 457 742 1950 1656
650 591 102 1143 - 870 635 1067* 602 985 - 457 778 2449 2313
700 635 127 1245 - 927 686 1130* 673 1061 - 610 872 3193 2767
750 686 127 1295 - 984 737 1194* 708 1139 - 610 907 4037 3447
800 737 127 1372 - 1048 832 1245* 750 1217 - 610 949 4355 3856
900 832 127 1524 - 1168 876 1384* 817 1363 - 762 1016 6350 5670
1050 876 127 1829 - 1346 1048 1435* 858 1444 - 914 1057 - -
■ Length (A) of a weld x flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
◆ Length exceeds specified dimensions in API 6D/ISO 14313.
● Dimensions of 22” (550 mm) flanges are per MSS-SP-44 and 26” (650 mm) to 42” (1050 mm) flanges are per ASME B16.47 series A.
Note: Venturi opening or other reduced-bore valves are available upon request.

13
DIMENSIONS
Full Bore ASME /ANSI Class 300 (PN 50) L

H
G

D1 D2 B E
H

Dimensions
Size in. Flanged End ■ Weld Diameter C.L. to Approximate
C.L. to Body Lever
Ball RF RTJ End ■ Handwheel Handwheel Valve Weight
Dia. Dia. Bottom Sphere Length
Nom Bore Stem Length Length Length for Gear C.L. lb
●
Dia. B Size A A D1 D2 A C E L G H Flange Weld
2 2.06 1.0 8.50 9.125 6.50 2.06 11.0◆ 3.94 5.00 24 - 6.34 50 45
3 3.13 1.0 11.125 11.750 8.25 3.13 12.5◆ 5.12 6.75 24 - 7.44 80 75
4 4.06 1.5 12.00 12.625 10.00 4.06 14.0◆ 5.94 8.50 36 - 8.43 125 100
6 6.00 1.5 15.875 16.500 12.50 6.00 18.0 7.91 11.25 - 12 10.43 250 225
8 8.00 2.0 19.75** 20.375 15.00 8.00 21.5◆ 10.00 15.50 - 18 12.55 455 450
10 10.00 2.0 22.375 23.000 17.50 10.00 23.5◆ 12.12 18.50 - 18 14.54 750 650
12 12.00 3.0 25.50 26.125 20.50 12.00 26.5◆ 14.50 22.36 - 18 20.14 1275 1100
14 13.25 3.0 30.00 30.625 23.00 13.25 28.5* 14.64 24.00 - 24 21.16 1370 1230
16 15.25 3.0 33.00 33.625 25.50 15.25 30.5* 16.01 26.32 - 24 22.52 1725 1550
18 17.25 4.0 36.00 36.625 28.00 17.25 33.5* 19.25 29.20 - 24 26.19 2700 2200
20 19.25 4.0 39.00 39.750 30.50 19.25 35.5* 20.81 32.27 - 18 27.75 3400 2760
22 21.25 4.0 43.00 43.875 33.00 21.25 38.5* 22.28 36.00 - 24 29.22 4050 3510
24 23.25 4.0 45.00 45.875 36.00 23.25 42.0* 23.69 38.76 - 24 30.63 5390 4260
26 25.00 5.0 49.00 50.000 38.25 25.00 44.5* 26.49 41.75 - 24 34.34 6625 5600
28 27.00 5.0 53.00 54.000 40.75 27.00 47.0* 27.88 44.86 - 24 35.72 7725 6500
30 29.00 5.0 55.00 56.000 43.00 29.00 49.0* 29.51 47.90 - 30 37.37 10000 8800
34 32.75 5.0 64.00 65.125 47.50 32.75 54.5* 32.16 53.64 - 36 40.01 14700 12000
36 34.50 7.5 68.00 69.125 50.00 34.50 56.5* 36.80 56.83 - 24 46.92 16300 15500
40 38.50 7.5 74.00 - 48.75 38.50 65.0* 40.14 65.00 - 36 50.25 - -
42 41.25 7.5 76.00 - 50.75 41.25 66.5* 41.78 68.60 - 42 51.89 - -
48 46.50 7.5 86.00 - 57.75 46.50 76.0* 45.90 77.00 - - - - -
Size mm kg
50 52 25 216 232 165 52 279◆ 100 127 610 - 161 23 20
80 80 25 283 298 210 80 318◆ 130 172 610 - 189 36 34
100 103 38 305 321 254 103 356◆ 151 216 914 - 214 57 45
150 152 38 403 419 318 152 457 201 286 - 305 265 113 102
200 203 51 502** 518 381 203 546◆ 254 394 - 457 319 206 204
250 254 51 568 584 445 254 597◆ 308 470 - 610 369 340 295
300 305 76 648 664 521 305 673◆ 368 568 - 457 512 578 499
350 337 76 762 778 584 337 724* 372 610 - 610 537 621 558
400 387 76 838 854 648 387 775* 407 669 - 610 572 782 703
450 438 102 914 930 711 438 851* 489 742 - 610 665 1225 998
500 489 102 991 1010 775 489 902* 529 820 - 457 705 1542 1252
550 540 102 1092 1114 838 540 978* 566 914 - 610 742 1837 1592
600 591 102 1143 1165 914 591 1067* 602 985 - 610 778 2445 1932
650 635 127 1245 1270 972 635 1130* 673 1060 - 610 872 3005 2540
700 686 127 1346 1372 1035 686 1194* 708 1139 - 610 907 3504 2948
750 737 127 1397 1422 1092 737 1245* 750 1217 - 762 949 4536 3992
850 832 127 1626 1654 1207 832 1384* 817 1362 - 914 1016 6668 5443
900 876 191 1727 1756 1270 876 1435* 935 1443 - 610 1192 7394 7031
1000 978 191 1880 - 1238 978 1651* 1020 1651 - 914 1276 - -
1050 1048 191 1930 - 1289 1048 1689* 1061 1742 - 1067 1318 - -
1200 1181 191 2184 - 1467 1181 1930* 1166 1956 - - - - -

■ Length (A) of a weld x flanged-end valve is one half the sum of length (A) of a weld end and a flanged end of the same size and rating.
* Short pattern.
◆ Length exceeds specified dimensions in API 6D/ISO 14313.
● Dimensions of 22” (550 mm) flanges are per MSS-SP-44 and 26” (650 mm) through 42” (1050 mm) flanges are per ASME B16.47 series A.
** Prior to 1/1/98 – manufactured to 16.5” (419 mm) short pattern length.

14
Reduced Bore ASME /ANSI Class 300 (PN 50) L

H
G

D1 D2 B E
H

Dimensions
Size in. Flanged End ■ Weld C.L. Diameter C.L. to Approximate
Body Lever
Ball RF RTJ End ■ to Handwheel Handwheel Valve Weight
Dia. Dia. Sphere Length
Nom Bore Stem Length Length Length Bottom for Gear C.L. lb
●
Dia. B Size A A D1 D2 A C E L G H Flange Weld
3 2.06 1.0 11.125 11.75 8.25 3.13 11.0* 3.94 5.00 24 - 6.34 64 50
4 3.13 1.0 12.00 12.625 10.00 4.06 12.5◆ 5.12 6.75 24 - 7.44 95 87
6 4.06 1.5 15.875 16.500 12.50 6.00 14.0* 5.94 8.50 36 - 8.43 180 150
8 6.00 1.5 19.75** 20.375 15.00 8.00 18.0* 7.91 11.25 - 12 10.43 365 290
10 8.00 2.0 22.375 23.000 17.50 10.00 21.5* 10.00 15.50 - 18 12.55 650 525
12 10.00 2.0 25.50 26.125 20.50 12.00 23.5* 12.12 18.50 - 18 14.54 1050 840
14 12.00 3.0 30.00 30.625 23.00 13.25 26.5* 14.50 22.36 - 18 20.14 1285 1160
16 13.25 3.0 33.00 33.625 25.50 15.25 28.5* 14.64 24.00 - 24 21.16 1660 1330
18 15.25 3.0 36.00 36.625 28.00 17.25 30.5* 16.01 26.32 - 24 22.52 1990 1700
20 17.25 4.0 39.00 39.750 30.50 19.25 33.5* 19.25 29.20 - 24 26.19 3100 2300
22 19.25 4.0 43.00 43.875 33.00 21.25 33.5* 20.81 32.27 - 18 27.75 3600 3050
24 21.25 4.0 45.00 45.875 36.00 23.25 38.5* 22.28 36.00 - 24 29.22 4500 3650
26 23.25 4.0 49.00 50.000 38.25 25.00 42.0* 23.69 38.76 - 24 30.63 5750 5100
28 25.00 5.0 53.00 54.000 40.75 27.00 44.5* 26.49 41.75 - 24 34.34 7260 6100
30 27.00 5.0 55.00 56.000 43.00 29.00 47.0* 27.88 44.86 - 24 35.72 9100 7600
32 29.00 5.0 60.00 61.125 45.25 32.75 49.0* 29.51 47.90 - 30 37.37 10150 8800
36 32.75 5.0 68.00 69.125 50.00 34.50 54.5* 32.16 53.64 - 36 40.01 15350 13000
42 34.50 7.5 76.00 - 50.75 41.25 56.5* 36.80 56.83 - 24 49.92 - -
Size mm kg
80 52 25 283 298 210 80 279* 100 127 610 - 161 29 23
100 80 25 305 321 254 103 318◆ 130 171 610 - 189 43 39
150 103 38 403 419 318 152 356* 151 216 914 - 214 82 68
200 152 38 502** 518 381 203 457* 201 286 - 305 265 166 132
250 203 51 568 584 445 254 546* 254 394 - 457 319 295 238
300 254 51 648 664 521 305 597* 308 470 - 457 369 476 381
350 305 76 762 778 584 337 673* 368 568 - 457 512 583 526
400 337 76 838 854 648 387 724* 372 610 - 610 537 753 603
450 387 76 914 930 711 438 775* 407 669 - 610 572 903 771
500 438 102 991 1010 775 489 851* 489 742 - 610 665 1406 1043
550 489 102 1092 1114 838 540 851* 529 820 - 457 705 1633 1383
600 540 102 1143 1165 914 591 978* 566 914 - 610 742 2041 1656
650 591 102 1245 1270 972 635 1067* 602 985 - 610 778 2608 2313
700 635 127 1346 1372 1035 686 1130* 673 1060 - 610 872 3293 2767
750 686 127 1397 1422 1092 737 1194* 708 1139 - 610 907 4128 3447
800 737 127 1524 1553 1149 832 1245* 750 1217 - 762 949 4604 3992
900 832 127 1727 1756 1270 867 1384* 817 1362 - 914 1016 6963 5897
1050 876 191 1930 - 1289 1048 1435* 935 1443 - 610 1192 - -

■ Length (A) of a weld x flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
◆ Length exceeds specified dimensions in API 6D/ISO 14313.
● Dimensions of 22” (550 mm) flanges are per MSS-SP-44 and 26” (650 mm) through 42” (1050 mm) flanges are per ASME B16.47 series A.
** Prior to 1/1/98 – manufactured to 16.5” (419 mm) short pattern length.
Note: Venturi opening or other reduced-bore valves are available upon request.

15
DIMENSIONS
Full Bore ASME/ANSI Class 400 (PN 64) L

H
G

D1 D2 B E H

Dimensions
Size in. Flanged End ■ Weld C.L. Diameter C.L. to Approximate
Body Lever
Ball RF RTJ End ■ to Handwheel Handwheel Valve Weight
Dia. Dia. Sphere Length
Nom Bore Stem Length Length Length Bottom for Gear C.L. lb
Dia. B Size A A D1● D2 A C E L G H Flange Weld
2 2.06 Use ASME/ANSI Class 600 Valves (PN 100)
3 3.13 Use ASME/ANSI Class 600 Valves (PN 100)
4 4.06 1.5 16.0 16.125 10.00 4.06 14.0* 5.94 8.50 48 - 8.43 150 100
6 6.00 1.5 19.5 19.625 12.50 6.00 18.0* 7.91 11.25 - 12 10.43 300 225
8 8.00 2.0 23.5 23.625 15.00 8.00 21.5* 10.00 15.50 - 18 12.55 550 450
10 10.00 2.0 26.5 26.625 17.50 10.00 23.5* 12.12 18.50 - 24 14.54 850 650
12 12.00 3.0 30.0 30.125 20.50 12.00 26.5* 14.50 22.36 - 18 20.14 1400 1100
14 13.25 3.0 32.5 32.625 23.00 13.25 28.5* 14.64 24.00 - 24 21.16 1650 1230
16 15.25 4.0 35.5 35.625 25.50 15.25 30.5* 17.84 26.32 - 18 24.78 2225 1770
18 17.25 4.0 38.5 38.625 28.00 17.25 33.5* 19.25 29.20 - 24 26.19 2850 2200
20 19.25 5.0 41.5 41.750 30.50 19.25 35.5* 22.11 32.27 - 24 30.00 3750 3000
22 21.25 5.0 45.0 45.375 33.00 21.25 38.5* 23.63 36.00 - 24 31.53 4750 3950
24 23.25 5.0 48.5 48.875 36.00 23.25 42.0* 25.05 38.76 - 24 32.95 5600 4750
26 25.00 5.0 51.5 52.000 38.25 25.00 44.5* 26.49 41.75 - 24 34.34 7100 5600
28 27.00 5.0 55.0 55.500 40.75 27.00 47.0* 27.88 44.86 - 30 35.72 8560 6500
30 29.00 5.0 60.0 60.500 43.00 29.00 49.0* 29.51 47.90 - 36 37.37 10600 8800
34 32.75 7.5 70.0 70.625 47.50 32.75 54.5* 35.19 53.64 - 30 45.31 15400 12300
36 34.50 7.5 74.0 74.625 50.00 34.50 56.5* 36.80 56.83 - 30 46.92 18000 15500
40 38.50 7.5 78.0 - 50.00 38.50 65.0* 40.14 65.00 - 42 50.25 25500 22250
42 41.25 7.5 81.0 - 52.00 41.25 66.5* 41.78 68.60 - 42 51.89 28750 24750
48 46.50 9.0 91.0 - 59.50 46.50 76.0* 47.98 77.00 - - - - -
Size mm kg
50 52 Use ASME/ANSI Class 600 Valves (PN 100)
80 80 Use ASME/ANSI Class 600 Valves (PN 100)
100 103 38 406 410 254 103 356* 151 216 1219 - 214 68 45
150 152 38 495 498 318 152 457* 201 286 - 305 265 136 102
200 203 51 597 600 381 203 546* 254 394 - 457 319 249 204
250 254 51 673 676 445 254 597* 308 470 - 610 369 386 295
300 305 76 762 765 521 305 673* 368 568 - 457 512 635 499
350 337 76 826 829 584 337 724* 372 610 - 610 537 748 558
400 387 102 902 905 648 387 775* 453 669 - 457 629 1009 803
450 438 102 978 981 711 438 851* 489 742 - 610 665 1293 998
500 489 127 1054 1060 775 489 902* 562 820 - 610 762 1701 1361
550 540 127 1143 1153 838 540 978* 600 914 - 610 801 2155 1792
600 591 127 1232 1241 914 591 1067* 636 985 - 610 837 2540 2155
650 635 127 1308 1321 9712 635 1130* 673 1060 - 610 872 3221 2540
700 686 127 1397 1410 1035 686 1194* 708 1139 - 762 907 3883 2948
750 737 127 1524 1537 1092 737 1245* 750 1217 - 914 949 4808 3992
850 832 191 1778 1794 1207 832 1384* 894 1362 - 762 1151 6985 5579
900 876 191 1880 1895 1270 876 1435* 935 1443 - 762 1192 8165 7031
1000 978 191 1981 - 1270 978 1651* 1020 1651 - 1067 1276 11567 10092
1050 1048 191 2057 - 1321 1048 1689* 1061 1742 - 1067 1318 13041 11226
1200 1181 229 2311 - 1511 1181 1930* 1219 1956 - - - - -
■ Length (A) of a weld x flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
● Dimensions of 22” (550 mm) flanges are per MSS-SP-44 and 26” (650 mm) through 42” (1050 mm) flanges are per ASME B16.47 series A.

16
Reduced Bore Asme/ANSI Class 400 (PN 64) L

H
G

D1 D2 B E
H

Dimensions
Size in. Flanged End ■ Weld C.L. Diameter C.L. to Approximate
Ball RF RTJ End ■ to Body Lever Handwheel Handwheel Valve Weight
Dia. Dia.
Nom Bore Stem Length Length Length Bottom Sphere Length for Gear C.L. lb
●
Dia. B Size A A D1 D2 A C E L G H Flange Weld
3 2.06 Use ASME/ANSI Class 600 Valves (PN 100)
4 3.13 1.0 16.0 16.125 10.00 4.06 12.5* 5.12 6.75 24 - 7.44 125 87
6 4.06 1.5 19.5 19.625 12.50 6.00 14.0* 5.94 8.50 48 - 8.43 189 150
8 6.00 1.5 23.5 23.625 15.00 8.00 18.0* 7.91 11.25 - 12 10.43 424 290
10 8.00 2.0 26.5 26.625 17.50 10.00 21.5* 10.00 15.50 - 18 12.55 608 525
12 10.00 2.0 30.0 30.125 20.50 12.00 23.5* 12.12 18.50 - 24 14.54 1020 840
14 12.00 3.0 32.5 32.625 23.00 13.25 26.5* 14.50 22.36 - 18 20.14 1490 1160
16 13.25 3.0 35.5 35.625 25.25 15.25 28.5* 14.64 24.00 - 24 21.16 1910 1330
18 15.25 4.0 38.5 38.625 28.00 17.25 30.5* 17.84 36.32 - 18 24.78 2400 1920
20 17.25 4.0 41.5 41.750 30.50 19.25 33.5* 19.25 29.20 - 24 26.19 3200 2650
22 19.25 5.0 45.0 45.375 33.00 21.25 35.5* 22.11 32.27 - 24 30.00 4250 3300
24 21.25 5.0 48.5 48.875 36.00 23.25 38.5* 23.63 36.00 - 24 31.53 5050 4300
26 23.25 5.0 51.5 52.000 38.25 25.00 42.0* 25.05 38.76 - 24 32.95 6250 5100
28 25.00 5.0 55.0 55.500 40.75 27.00 44.5* 26.49 41.75 - 24 34.34 7750 6100
30 27.00 5.0 60.0 60.500 43.00 29.00 47.0* 27.88 44.86 - 30 35.72 9500 7600
32 29.00 5.0 65.0 65.625 45.25 32.75 49.0* 29.51 47.90 - 36 37.37 11500 9350
36 32.75 7.5 74.0 74.625 50.00 34.50 54.5* 35.19 53.64 - 30 45.31 16000 13000
42 34.50 7.5 81.0 - 52.00 41.25 56.5* 36.80 56.83 - 30 46.92 - -
Size mm kg
80 52 Use ASME/ANSI Class 600 Valves (PN 100)
100 80 25 406 410 254 103 318* 130 171 610 - 189 57 39
150 103 38 495 498 318 152 356* 151 216 1219 - 214 86 68
200 152 38 597 600 381 203 457* 201 286 - 305 265 192 132
250 203 51 673 676 445 254 546* 254 394 - 457 319 276 238
300 254 51 762 765 521 305 597* 308 470 - 610 369 463 381
350 305 76 826 829 584 337 673* 368 568 - 457 512 676 526
400 337 76 902 905 641 387 724* 372 610 - 610 537 866 603
450 387 102 978 981 711 438 775* 453 923 - 457 629 1089 871
500 438 102 1054 1060 775 489 851* 489 742 - 610 665 1451 1202
550 489 127 1143 1153 838 540 902* 562 820 - 610 762 1928 1497
600 540 127 1232 1241 914 591 978* 600 914 - 610 801 2291 1950
650 591 127 1308 1321 972 635 1067* 636 985 - 610 837 2835 2313
700 635 127 1397 1410 1035 686 1130* 673 1060 - 610 872 3515 2767
750 686 127 1524 1537 1092 737 1194* 708 1139 - 762 907 4309 3447
800 737 127 1651 1667 1149 832 1245* 750 1217 - 914 949 5216 4241
900 832 191 1880 1895 1270 876 1384* 894 1362 - 762 1151 7257 5897
1050 876 191 2057 - 1321 1048 1435* 935 1443 - 762 1192 - -
■ Length (A) of a weld x flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
● Dimensions of 2” (550 mm) flanges are per MSS-SP-44 and 26” (650 mm) through 42” (1050 mm) flanges are per ASME B16.47 series A.
Note: Venturi opening or other reduced-bore valves are available upon request.

17
DIMENSIONS
Full Bore ASME/ANSI Class 600 (PN 100)

Please use illustrations from next page as a reference.

Dimensions
Size in. Flanged End ■ Weld C.L. Diameter C.L. to Approximate
Body Lever
Ball RF RTJ End ■ to Handwheel Handwheel Valve Weight
Dia. Dia. Sphere Length
Nom Bore Stem Length Length Length Bottom for Gear C.L. lb
●
Dia. B Size A A D1 D2 A C E L G H Flange Weld
2 2.06 1 11.5 11.625 6.5 2.06 11.0* 3.94 5 24 - 6.34 60 45
3 3.13 1 14 14.125 8.25 3.13 12.5* 5.12 6.75 36 - 7.44 85 75
4 4.06 1.5 17 17.125 10.75 4.06 14.0* 5.94 8.5 48 - 8.43 165 100
6 6.00 1.5 22 22.125 14 6 18.0* 7.91 11.25 - 12 10.43 360 225
8 8.00 2 26 26.125 16.5 8 21.5* 10 15.5 - 18 12.55 650 450
10 10.00 2 31 31.125 20 10 23.5* 12.12 18.5 - 24 14.54 1000 650
12 12.00 3 33 33.125 22 12 26.5* 14.5 22.36 - 18 20.14 1510 1100
14 13.25 3 35 35.125 23.75 13.25 28.5* 14.64 24 - 24 21.16 1910 1230
16 15.25 4 39 39.125 27 15.25 30.5* 17.84 26.32 - 18 24.78 2400 1770
18 17.25 4 43 43.125 29.25 17.25 33.5* 19.25 29.2 - 24 26.19 2955 2200
20 19.25 5 47 47.25 32 19.25 35.5* 22.11 32.27 - 24 30 4100 3000
22 21.25 5 51 51.375 34.25 21.25 38.5* 23.63 36 - 24 31.53 5400 3950
24 23.25 5 55 55.375 37 23.25 42.0* 25.05 38.76 - 30 32.95 6550 4750
26 25.00 5 57 57.5 40 25 44.5* 26.49 41.75 - 36 34.34 7800 5600
28 27.00 7.5 61 61.5 42.25 27 47.0* 30.87 44.86 - 30 40.99 9500 6700
30 29.00 7.5 65 65.5 44.5 29 49.0* 32.53 47.9 - 30 42.65 12000 9120
32 30.75 7.5 70 70.630 47.00 30.75 52.0* 34.25 52.25 42 44.50 13999 10494
34 32.75 7.5 76 76.625 49 32.75 54.5* 35.19 53.64 - 42 45.31 16025 12300
36 34.5 7.5 82 82.625 51.75 34.5 56.5* 36.8 56.83 - 42 46.92 19100 15500
40 38.5 9 80 - 52 38.5 65.0* 42.02 65 - 42 55.425 26770 23000
42 41.25 9 83 - 55.25 41.25 66.5* 43.66 68.6 - 42 57.06 30500 25500
44 42.75 11 - - - 42.75 70.5* 46.95 71.00 - - - - -
48 46.50 11 94 - 62.75 46.5 76.0* 51.18 77.33 - - - - -
56 55.12 13 - - - 55.12 93.7* 59.10 91.70 - - - - -
SIZE mm kg
50 52 25 292 295 165 52 279* 100 127 610 - 161 27 20
80 80 25 356 359 210 80 318* 130 171 914 - 189 39 34
100 103 38 432 435 273 103 356* 151 216 1219 - 214 75 45
150 152 38 559 562 356 152 457* 201 286 - 305 265 163 102
200 203 51 660 664 419 203 546* 254 394 - 457 319 295 204
250 254 51 787 791 508 254 597* 308 470 - 610 369 454 295
300 305 76 838 841 559 304 673* 368 568 - 457 512 685 499
350 337 76 889 892 603 337 724* 372 610 - 610 537 866 558
400 387 102 991 994 686 387 775* 453 669 - 457 629 1089 803
450 438 102 1092 1095 743 438 851* 489 742 - 610 665 1340 998
500 489 127 1194 1200 813 489 902* 562 820 - 610 762 1860 1361
550 540 127 1295 1305 870 540 978* 600 914 - 610 801 2449 1792
600 591 127 1397 1407 940 591 1067* 636 985 - 762 837 2971 2155
650 635 127 1448 1461 1016 635 1130* 673 1060 - 914 872 3538 2540
700 686 191 1549 1562 1073 686 1194* 784 1139 - 762 1041 4309 3039
750 737 191 1651 1664 1130 737 1245* 826 1217 - 762 1083 5443 4137
800 781 191 1778 1794 1193.8 781 1321* 870 1327 1067 1130 6350 4760
850 832 191 1930 1946 1245 832 1384* 894 1362 - 1067 1151 7269 5579
900 876 191 2083 2099 1314 876 1435* 935 1443 - 1067 1192 8664 7031
1000 978 229 2032 - 1321 978 1651* 1067 1651 - 1067 1408 12143 10433
1050 1048 229 2108 - 1403 1048 1689* 1109 1742 - 1067 1449 13835 11567
1100 1086 279 - - - 1086 1791* 1192 1803 - - - - -
1200 1181 279 2388 - 1594 1181 1930* 1300 1964 - - - - -
1400 1400 330 - - - 1400 2381* 1501 2328 - - - - -

■ Length (A) of a weld x flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
● Dimensions of 22” (550 mm) flanges are per MSS-SP-44 and 26” (650 mm) through 42” (1050 mm) flanges are per ASME B16.47 series A.

18
Reduced Bore ASME/ANSI Class 600 (PN 100) L

H
G

D1 D2 B E H

Dimensions
Size in. Flanged End ■ Weld C.L. Diameter C.L. to Approximate
Body Lever
Ball RF RTJ End ■ to Handwheel Handwheel Valve Weight
Dia. Dia. Sphere Length
Nom Bore Stem Length Length Length Bottom for Gear C.L. lb
●
Dia. B Size A A D11 D2 A C E L G H Flange Weld
3 2.06 1 14 14.125 8.25 3.13 11.0* 3.94 5 24 - 6.34 80 50
4 3.13 1 17 17.125 10.75 4.06 12.5* 5.12 6.75 36 - 7.44 150 87
6 4.06 1.5 22 22.125 14 6 14.0* 5.94 8.5 48 - 8.43 250 150
8 6.00 1.5 26 26.125 16.5 8 18.0* 7.91 11.25 - 12 10.43 470 290
10 8.00 2 31 31.125 20 10 21.5* 10 15.5 - 18 12.55 850 525
12 10.00 2 33 33.125 22 12 23.5* 12.12 18.5 - 24 14.54 1150 840
14 12.00 3 35 35.125 23.75 13.25 26.5* 14.5 22.36 - 18 20.14 1640 1160
16 13.25 3 39 39.125 27 15.25 28.5* 14.64 24 - 24 21.16 2225 1330
18 15.25 4 43 43.125 29.25 17.25 30.5* 17.84 26.32 - 18 24.78 2600 1920
20 17.25 4 47 47.25 32 19.25 33.5* 19.25 29.2 - 24 26.19 3500 2650
22 19.25 5 51 51.375 34.25 21.25 35.5* 22.11 32.27 - 24 30 4450 3300
24 21.25 5 55 55.375 37 23.25 38.5* 23.63 36 - 24 31.53 5750 4300
26 23.25 5 57 57.5 40 25 42.0* 25.05 38.76 - 30 32.95 7000 5100
28 25.00 5 61 61.5 42.25 27 44.5* 26.49 41.75 - 36 34.34 8600 6300
30 27.00 7.5 65 65.5 44.5 29 47.0* 30.87 44.86 - 30 40.99 10100 7800
32 29.00 7.5 70.00 70.630 47.00 30.75 49.0* 32.53 47.90 - 30 42.65 12800 9350
34 29.00 7.5 76.00 76.625 49.00 32.75 49.0* 32.53 47.90 - 30 42.65 15200 11200
36 32.75 7.5 82 82.625 51.75 34.5 54.5* 35.19 53.64 - 42 45.31 17600 13000
42 34.50 7.5 83 - 55.25 41.25 56.5* 36.8 56.83 - 42 46.92 - -
44 38.50 9 - - - 42.75 65.0* 42.02 65.00 - - - - -
56 46.50 11 - - - 55.10 76.0* 51.18 77.32 - - - - -
Size mm kg
80 52 25 356 359 210 80 279* 100 127 610 - 161 36 23
100 80 25 432 435 273 103 318* 130 171 914 - 189 68 39
150 103 38 559 562 356 152 356* 151 216 1219 - 214 113 68
200 152 38 660 664 419 203 457* 201 286 - 305 265 213 132
250 203 51 787 791 508 254 546* 254 394 - 457 319 386 238
300 254 51 838 841 559 305 597* 308 470 - 610 369 522 381
350 305 76 889 892 603 337 673* 368 568 - 457 512 744 526
400 337 76 991 994 686 387 724* 372 610 - 610 537 1009 603
450 387 102 1092 1095 743 438 775* 453 669 - 457 629 1179 871
500 438 102 1194 1200 813 489 851* 489 742 - 610 665 1588 1202
550 489 127 1295 1305 870 540 902* 562 820 - 610 762 2018 1497
600 540 127 1397 1407 940 591 978* 600 914 - 610 801 2608 1950
650 591 127 1448 1461 1016 635 1067* 636 985 - 762 837 3175 2313
700 635 127 1549 1562 1073 686 1130* 673 1060 - 914 872 3901 2858
750 686 191 1651 1664 1130 737 1194* 784 1139 - 762 1041 4581 3538
800 737 191 1778 1794 1194 781 1245* 826 1217 - 762 1083 5800 4250
850 737 191 1930 1946 1245 832 1245* 826 1217 - 762 1083 6900 5100
900 832 191 2083 2099 1314 876 1384* 894 1362 - 1067 1151 7983 5897
1100 978 229 - - - 1086 1651* 1067 1651 - - - - -
1400 1181 279 - - - 1400 1930* 1300 1964 - - - - -

■ Length (A) of a weld x flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
● Dimensions of 22” (550 mm) flanges are per MSS-SP-44 and 26” (650 mm) through 42” (1050 mm) flanges are per ASME B16.47 series A.
Note: Venturi opening or other reduced-bore valves are available upon request.

19
DIMENSIONS
Full Bore ASME/ANSI Class 900 (PN 150)

H
G

D1 D2 B E H

Dimensions
Size in. Flanged End ■ Weld C.L. Diameter C.L. to Approximate
Body Lever
Ball RF RTJ End ■ to Handwheel Handwheel Valve Weight
Dia. Dia. Sphere Length
Nom Bore Stem Length Length Length Bottom for Gear C.L. lb
●
Dia. B Size A A D1 D2 A C E L G H Flange Weld
2 2.06 Use 1500 Class Valves (PN 250)
3 3.13 1.5 15.0 15.125 9.50 3.13 13.5* 4.88 7.00 36 - 7.44 140 120
4 4.06 2.0 18.0 18.125 11.50 4.06 15.0* 6.77 9.25 - 12 9.76 250 190
6 6.00 2.0 24.0 24.125 15.00 6.00 20.0* 8.39 12.50 - 18 10.86 525 410
8 8.00 2.0 29.0 29.125 18.50 8.00 23.5* 10.00 15.50 - 24 12.55 1210 590
10 10.00 3.0 33.0 33.125 21.50 10.00 25.5* 12.88 18.50 - 18 18.49 1325 1010
12 12.00 3.0 38.0 38.125 24.00 12.00 29.5* 14.50 22.36 - 24 20.14 2250 1350
14 12.75 5.0 40.5 40.875 25.25 12.75 31.5* 17.40 24.50 - 24 25.30 3250 2155
16 14.75 5.0 44.5 44.875 27.75 14.75 33.5* 19.02 27.25 - 24 26.92 4000 2450
18 16.75 5.0 48.0 48.500 31.00 16.75 36.5* 20.62 30.07 - 24 28.51 5300 3950
20 18.625 7.5 52.0 52.500 33.75 18.625 38.5* 24.22 33.88 - 24 35.23 7100 5250
24 22.50 7.5 61.0 61.750 41.00 22.50 45.0* 28.07 39.95 - 30 38.18 10500 6450
30 29.00 7.5 75.0 75.875 48.50 29.00 52.0* 32.53 49.88 - 42 42.65 17500 11500
36 34.50 9.0 90.0 91.125 57.50 34.50 59.5* 38.64 58.25 - - 52.03 25600 17500
Size mm kg
50 52 Use 1500 Class Valves (PN 250)
30 80 38 381 384 241 80 343* 124 178 914 - 189 64 54
100 103 51 457 460 292 103 381* 172 235 - 305 248 113 86
150 152 51 610 613 381 152 508* 213 318 - 457 276 238 186
200 203 51 737 740 410 203 597* 254 394 - 610 319 549 268
250 254 76 838 841 546 254 648* 327 470 - 457 470 601 458
300 305 76 965 968 610 305 749* 368 568 - 610 512 1021 612
350 324 127 1029 1038 641 324 800* 442 622 - 610 643 1474 977
400 375 127 1130 1140 705 375 851* 483 692 - 610 684 1814 1111
450 425 127 1219 1232 787 425 927* 524 764 - 610 724 2404 1792
500 473 191 1321 1334 857 473 978* 615 861 - 610 895 3221 2381
600 572 191 1549 1568 1041 572 1143* 713 1015 - 762 970 4763 2926
750 737 191 1905 1927 1232 737 1321* 826 1267 - 1067 1083 7938 5216
900 876 229 2286 2315 1461 876 1511* 981 1480 - - 1322 11612 7938

■ Length (A) of a weld x flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
● Dimensions of 22” (550 mm) flanges are per MSS-SP-44 and 26” (650 mm) through 42” (1050 mm) flanges are per ASME B16.47 series A.

20
Reduced Bore ASME/ANSI Class 900 (PN 150)

H
G

D1 D2 B E
H

Dimensions
Size in. Flanged End ■ Weld C.L. Diameter C.L. to Approximate
Body Lever
Ball RF RTJ End ■ to Handwheel Handwheel Valve Weight
Dia. Dia. Sphere Length
Nom Bore Stem Length Length Length Bottom for Gear C.L. lb
●
Dia. B Size A A D1 D2 A C E L G H Flange Weld
3 2.06 1.0 15.0 15.125 9.50 3.13 11.0* 3.94 5.00 24 - 6.34 120 70
4 3.13 1.5 18.0 18.125 11.50 4.06 13.5* 4.88 7.00 36 - 7.44 190 150
6 4.06 2.0 24.0 24.125 15.00 6.00 15.0* 6.77 9.25 - 12 9.76 400 260
8 6.00 2.0 29.0 29.125 18.50 8.00 20.0* 8.39 12.50 - 18 10.86 850 650
10 8.00 2.0 33.0 33.125 21.50 10.00 23.5* 10.00 15.50 - 24 12.55 1290 725
12 10.00 3.0 38.0 38.125 24.00 12.00 25.5* 12.88 18.50 - 18 18.49 1700 1110
14 12.00 3.0 40.5 40.875 25.25 12.75 29.5* 14.50 22.36 - 24 20.14 2750 1680
16 12.75 5.0 44.5 44.875 27.75 14.75 31.5* 17.40 24.50 - 24 25.30 3650 2300
Size mm kg
80 52 25 381 384 241 80 279* 100 127 610 - 161 54 32
100 80 38 457 460 292 103 343* 124 178 914 - 189 86 68
150 103 51 610 613 381 152 381* 172 235 - 305 248 181 118
200 152 51 737 740 470 203 508* 213 318 - 457 276 386 295
250 203 51 838 841 546 254 597* 254 394 - 610 319 585 329
300 254 76 965 968 610 305 648* 327 470 - 457 470 771 503
350 305 76 1029 1038 641 324 749* 368 568 - 610 512 1247 762
400 324 127 1130 1140 705 375 800* 442 622 - 610 643 1656 1043

■ Length (A) of a weld x flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
● Dimensions of 22” (550 mm) flanges are per MSS-SP-44 and 26” (650 mm) through 42” (1050 mm) flanges are per ASME B16.47 series A.
Note: Venturi opening or other reduced-bore valves are available upon request.

21
DIMENSIONS
Full Bore ASME/ANSI Class 1500 (PN 250)

H
G

D1 D2 B E
H

Dimensions
Size in. Flanged End ■ Weld C.L. Diameter C.L. to Approximate
Body Lever
Ball RF RTJ End ■ to Handwheel Handwheel Valve Weight
Dia. Dia. Sphere Length
Nom Bore Stem Length Length Length Bottom for Gear C.L. lb
Dia. B Size A A D1 D2 A C E L G H Flange Weld
2 2.06 1.0 14.50 14.625 8.50 2.06 11.0* 3.94 5.00 36 - 6.34 100 45
3 3.13 1.5 18.50 18.625 10.50 3.13 13.5* 4.88 7.00 - 12 7.44 180 120
4 4.06 2.0 21.50 21.625 12.25 4.06 15.0* 6.77 9.25 - 12 9.76 300 190
6 6.00 2.0 27.75 28.000 15.50 6.00 20.0* 8.39 12.50 - 18 10.86 715 410
8 8.00 3.0 32.75 33.125 19.00 8.00 23.5* 10.95 16.38 - 18 16.89 1550 1075
10 10.00 4.0 39.00 39.375 23.00 10.00 25.5* 15.15 19.50 - 18 19.96 2000 1575
12 12.00 4.0 44.50 45.125 26.50 12.00 29.5* 17.31 23.38 - 24 21.80 3250 1825
14 12.75 5.0 49.50 50.250 29.50 12.75 31.5* 17.40 26.00 - 24 25.30 4200 2550
16 14.75 5.0 54.50 55.375 32.50 14.75 33.5* 19.02 29.25 - 30 26.92 5400 2950
18 16.75 7.5 60.50 61.375 36.00 16.75 36.5* 22.69 31.57 - 30 33.71 6350 5125
20 18.625 7.5 65.50 66.375 38.75 18.625 38.5* 24.22 34.72 - 30 35.23 9260 6025
24 22.50 7.5 76.50 77.625 46.00 22.50 45.0* 28.07 42.16 - 48 38.18 16250 9400
Size mm kg
50 52 25 368 371 216 52 279* 100 127 914 - 161 45 20
80 80 38 470 473 267 80 343* 124 178 - 305 189 82 54
100 103 51 546 549 311 103 381* 172 235 - 305 248 136 86
150 152 51 705 711 394 152 508* 213 318 - 457 276 324 186
200 203 76 832 841 483 203 597* 278 416 - 457 429 703 488
250 254 102 991 1000 584 254 648* 385 495 - 457 507 907 714
300 305 102 1130 1146 673 305 749* 440 594 - 610 554 1474 828
350 324 127 1257 1276 749 324 800* 442 660 - 610 643 1905 1157
400 375 127 1384 1407 826 375 851* 483 743 - 762 684 2449 1338
450 425 191 1537 1559 914 425 927* 576 802 - 762 856 2880 2325
500 473 191 1664 1686 984 473 978* 615 882 - 762 895 4200 2733
600 572 191 1943 1972 1168 572 1143* 713 1071 - 1219 970 7371 4264

■ Length (A) of a weld x flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.

22
Reduced Bore ASME/ANSI Class 1500 (PN 250)
L

H
G

D1 D2 B E
H

Dimensions
Size in. Flanged End ■ Weld C.L. Diameter C.L. to Approximate
Body Lever
Ball RF RTJ End ■ to Handwheel Handwheel Valve Weight
Dia. Dia. Sphere Length
Nom Bore Stem Length Length Length Bottom for Gear C.L. lb
Dia. B Size A A D1 D2 A C E L G H Flange Weld
3 2.06 1.0 18.50 18.625 10.50 3.13 11.0* 3.94 5.00 36 - 6.34 150 70
4 3.13 1.5 21.50 21.625 12.25 4.06 13.5* 4.88 7.00 - 12 7.44 240 150
6 4.06 2.0 27.75 28.000 15.50 6.00 15.0* 6.77 9.25 - 12 9.76 550 260
8 6.00 2.0 32.75 33.125 19.00 8.00 20.0* 8.39 12.50 - 18 10.86 1025 650
10 8.00 3.0 39.00 39..375 23.00 10.00 23.5* 10.95 16.38 - 18 16.89 1725 1200
12 10.00 4.0 44.50 45.125 26.50 12.00 25.5* 15.15 19.50 - 18 19.96 2810 1650
14 12.00 4.0 49.50 50.250 29.50 12.75 29.5* 17.31 23.38 - 24 21.80 3750 2100
16 12.75 5.0 54.50 55.375 32.50 14.75 31.5* 17.40 26.00 - 24 25.30 5150 2725
Size mm kg
80 52 25 470 473 267 80 279* 100 127 914 - 161 68 32
100 90 38 546 549 311 103 343* 124 178 - 305 189 109 68
150 103 51 705 711 394 152 381* 172 235 - 305 248 249 118
200 152 51 832 841 483 203 508* 213 318 - 457 276 465 295
250 203 76 991 1000 584 254 597* 278 416 - 457 429 782 544
300 254 102 1130 1146 673 305 648* 385 495 - 457 507 1275 748
350 305 102 1257 1276 749 324 749* 440 594 - 610 554 1701 953
400 324 127 1384 1407 826 375 800* 442 660 - 610 643 2336 1236

■ Length (A) of a weld x flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
Note: Venturi opening or other reduced-bore valves are available upon request.

23
DIMENSIONS
Full and Reduced Bore ASME/ANSI Class 2500 (PN 420)
L

H
G

D1 D2 B E
H

Dimensions
Size in. Flanged End ■ Weld C.L. Diameter C.L. to Approximate
Body Lever
Ball RF RTJ End ■ to Handwheel Handwheel Valve Weight
Dia. Dia. Sphere Length
Nom Bore Stem Length Length Length Bottom for Gear C.L. lb
Dia. B Size A A D1 D2 A C E L G H Flange Weld
Full Opening
2 2.06 1.0 17.75 17.875 9.25 2.06 15* 4.53 5.43 48 - 7.25 114 94
3 3.13 1.5 22.75 23.000 12.00 3.13 18* 5.67 7.50 - 12 8.94 236 187
4 4.06 2.0 26.50 26.875 14.00 4.06 20* 7.24 9.75 - 18 11.70 471 382
6 6.00 3.0 36.00 36.500 19.00 6.00 24* 9.76 13.50 - 24 13.13 943 737
8 7.125 4.0 40.50 40.875 21.75 7.125 28* 12.84 18.11 - 24 17.88 2094 1676
10 8.875 4.0 50.00 50.875 26.50 8.875 33* 14.84 20.87 - 24 20.00 2922 2166
12 10.50 5.0 56.00 56.875 30.00 10.50 36* 16.65 24.50 - 30 24.75 4506 3258
Reduced Opening
3 2.06 1.0 22.75 23.000 12.00 3.13 15* 4.53 5.43 48 - 7.25 156 129
4 3.13 1.5 26.50 26.875 14.00 4.06 18* 5.67 7.50 - 12 8.94 286 247
6 4.06 2.0 36.00 36.500 19.00 6.00 20* 7.24 9.75 - 18 11.70 638 513
8 6.00 3.0 40.50 40.875 21.75 7.125 24* 9.76 13.50 - 24 13.13 1297 1017
10 7.13 4.0 50.00 50.875 26.50 8.875 28* 12.84 18.11 - 24 17.88 2518 1916
12 8.875 4.0 56.00 56.875 30.00 10.50 33* 14.875 20.87 - 24 20.00 3566 2657
Size mm kg
Full Opening
50 52 25 451 454 235 52 381* 115 138 1219 - 184 52 43
80 80 38 578 584 305 80 457* 144 191 - 305 227 107 85
100 103 51 673 683 356 103 508* 184 248 - 457 297 214 173
150 152 76 914 927 483 152 610* 248 343 - 610 334 428 334
200 181 102 1029 1038 552.5 181 711* 326 460 - 610 454 950 760
250 225 102 1270 1292 673 225 838* 378 530 - 610 508 1325 983
300 267 127 1422 1445 762 267 914* 423 622 - 762 629 2044 1478
Reduced Opening
80 42 25 578 584 305 80 381* 115 138 1219 - 184 71 59
100 80 38 673 683 356 103 457* 144 191 - 305 227 130 98
150 103 51 914 927 483 152 508* 184 248 - 457 297 289 233
200 152 76 1029 1038 553 181 610* 248 343 - 610 334 588 461
250 181 102 1270 1292 673 225 711* 326 460 - 610 454 1142 869
300 225 102 1422 1445 762 267 838* 377 530 - 610 508 1618 1205
■ Length (A) of a weld x flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
Note: Venturi opening or other reduced-bore valves are available upon request.

24
Full Bore API Flanged 2000, 3000 and 5000 psi WP
L

H
G

D1 D2 B E
H

Dimensions
Size in. Flanged End RTJ C.L. Diameter Data for Valve
Body Lever
Ball to Handwheel with Operator
Length Length Dia. Sphere Length
Nom Bore Stem Bottom for Gear Normally Furnished
Dia. B Size A D1 D2 C E L G H Approx. Weight lb
2000 psi W.P. 4000 psi Test
2 2.06 1.0 11.625 6.50 2.06 3.94 5.00 36 - 6.34 44
3 3.13 1.0 14.124 8.25 3.13 5.12 6.75 36 - 7.44 85
4 4.06 1.5 17.125 10.75 4.06 5.94 8.50 36 - 8.43 165
7 6.00 2.0 22.125 14.00 6.00 7.91 11.50 - 24 10.29 445
3000 psi W.P. 6000 psi Test
2 2.06 1.0 14.625 8.50 2.06 3.94 5.00 36 - 6.34 90
3 3.13 1.5 15.125 9.50 3.13 4.88 7.00 36 - 7.44 130
4 4.06 2.0 18.125 11.50 4.06 6.77 9.25 36 - 9.76 255
7 6.00 2.0 24.125 15.00 6.00 8.39 12.50 - 30 10.92 675
5000 psi W.P. 10000 psi Test
2 2.06 2.0 14.625 8.50 2.06 3.94 5.00 36 - 6.34 95
3 3.13 1.5 18.625 10.50 3.13 4.88 7.00 36 - 7.44 189
4 4.06 2.0 21.625 12.25 4.06 6.77 9.25 - 24 9.30 361
7 6.00 3.0 28.000 15.50 6.00 8.39 13.50 - 24 13.13 805
Size mm kg
140.6 kg/cm2 W.P. 281.2 kg/cm2 Test
50 52.3 25.4 295 165 52 100 127 914 - 161 20
80 79.5 25.4 359 210 80 130 171 914 - 189 39
100 103.1 38.1 435 274 103 151 216 914 - 214 75
180 152.4 50.8 562 356 152 201 292 - 610 261 202
210.9 kg/cm2 W.P. 421.8 kg/cm2 Test
50 52.3 25.4 371 216 52 100 127 914 - 161 41
80 79.5 38.1 384 241 80 124 178 914 - 189 59
100 103.1 50.8 460 292 103 172 235 914 - 248 116
180 152.4 50.8 613 381 152 213 318 - 762 277 306
351.5 kg/cm2 W.P. 703.0 kg/cm2 Test
50 52.3 25.4 371 216 52 100 127 914 - 161 43
80 79.5 38.1 473 267 80 124 178 914 - 189 86
100 103.1 50.8 549 311 103 172 235 914 - 236 164
180 152.4 76.2 711 394 152 213 343 - 610 334 365

25
DIMENSIONS
Reduced Bore API Flanged 2000, 3000 and 5000 psi WP
L

H
G

D1 D2 B E
H

Dimensions
Size in. Flanged End RTJ C.L. Diameter Data for Valve
Body Lever
Ball to Handwheel with Operator
Length Length Dia. Sphere Length
Nom Bore Stem Bottom for Gear Normally Furnished
Dia. B Size A D1 D2 C E L G H Approx. Weight lb
2000 psi W.P. 4000 psi Test
3.13 2.06 1.0 14.125 8.25 3.13 3.94 5.00 36 - 6.34 80
4.06 3.13 1.0 17.125 10.75 4.06 5.12 6.75 36 - 7.44 140
7.06 4.06 1.5 22.125 14.00 6.00 5.94 8.50 36 - 8.43 230
3000 psi W.P. 6000 psi Test
3.13 2.06 1.0 15.125 9.50 3.13 3.94 5.00 36 - 6.34 105
4.06 3.13 1.5 18.125 11.50 4.06 4.88 7.00 36 - 7.44 197
7.06 4.06 2.0 24.125 15.00 6.00 6.77 9.25 36 - 9.76 345
5000 psi W.P. 10000 psi Test
3.13 2.06 1.0 18.625 10.50 3.13 3.94 5.00 36 - 6.34 130
4.06 3.13 1.5 21.625 12.25 4.06 4.88 7.00 36 - 7.44 230
7.06 4.06 2.0 28.000 15.50 6.00 6.77 9.25 - 24 9.30 490
Size mm kg
140.6 kg/cm2 W.P. 281.2 kg/cm2 Test
79.5 52.3 25.4 359 210 80 100 127 914 - 161 36
103.1 79.5 25.4 435 273 103 130 171 914 - 189 64
179.3 103.1 38.1 562 356 152 151 216 914 - 214 104
210.9 kg/cm2 W.P. 421.8 kg/cm2 Test
79.5 52.3 25.4 384 241 80 100 127 914 - 161 48
103.1 79.5 38.1 460 292 103 124 178 914 - 189 89
179.4 103.1 50.8 613 381 152 172 235 914 - 248 156
351.5 kg/cm2 W.P. 703.0 kg/cm2 Test
79.5 52.3 25.4 473 267 80 100 127 914 - 161 59
103.1 79.5 38.1 549 311 103 124 178 914 - 189 104
179.3 103.1 50.8 711 394 152 172 235 - 610 236 222

26
DIMENSIONAL DATA

Dimensions Centerline to Mounting Flanged

Dimension A
ASME/ANSI Pressure Class
Bore Size 150 300 400 600 900 1500 2500
in. (mm) (PN 20) (PN 50) (PN 64) (PN 100) (PN 150) (PN 250) (PN 420)
2 (50) 4.06 (103) 4.06 (103) 4.06 (103) 4.06 (103) 4.06 (103) 4.06 (103) 4.68 (119)
3 (80) 5.08 (129) 5.08 (129) 5.08 (129) 5.08 (129) 4.76 (121) 4.76 (121) 5.71 (145)
4 (100) 5.79 (147) 5.79 (147) 5.79 (147) 5.79 (147) 6.61 (168) 6.61 (168) 6.89 (175)
6 (150) 7.64 (194) 7.64 (194) 7.64 (194) 7.64 (194) 8.23 (209) 8.23 (209) 12.52 (318)
8 (200) 9.92 (252) 9.92 (252) 9.92 (252) 9.92 (252) 9.92 (252) 13.45 (342) 15.39 (391)
10 (250) 11.91 (303) 11.91 (303) 11.91 (303) 11.91 (303) 15.05 (382) 15.96 (405) 18.07 (459)
12 (300) 16.70 (424) 16.70 (424) 16.70 (424) 16.70 (424) 16.70 (424) 17.80 (452) 19.61 (498)
14 (350) 17.72 (450) 17.72 (450) 17.72 (450) 17.72 (450) 20.55 (522) 20.55 (522) -
16 (400) 19.08 (485) 19.08 (485) 20.78 (528) 20.78 (528) 22.17 (563) 22.17 (563) -
18 (450) 22.19 (564) 22.19 (564) 22.19 (564) 22.19 (564) 23.76 (604) 27.71 (704) -
20 (500) 23.75 (603) 23.75 (603) 25.25 (641) 25.25 (641) 29.23 (742) 29.23 (742) -
22 (550) 25.22 (641) 25.22 (641) 26.78 (680) 26.78 (680) - - -
24 (600) 26.63 (676) 26.63 (676) 28.20 (716) 28.20 (716) 32.18 (817) 32.18 (817) -
26 (650) 29.59 (752) 29.59 (752) 29.59 (752) 29.59 (752) - - -
28 (700) 30.97 (787) 30.97 (787) 30.97 (787) 34.99 (889) - - -
30 (750) 32.62 (829) 32.62 (829) 32.62 (829) 36.65 (931) 36.65 (931) - -
34 (850) 35.26 (896) 35.26 (896) 39.31 (998) 39.31 (998) - - -
36 (900) 36.85 (936) 40.92 (1039) 40.92 (1039) 40.92 (1039) 44.65 (1134) - -
40 (1000) 44.25 (1124) 44.25 (1124) 44.25 (1124) 48.05 (1220) - - -
42 (1050) 45.89 (1166) 45.89 (1166) 45.89 (1166) 49.69 (1262) - - -
48 (1200) 50.04 (1271) 50.04 (1271) 54.02 (1372) 56.50 (1435) - - -

The dimensions on this page, combined with the top works dimensions on the following two pages, provide the information
required for determining the overall dimensions of a CAMERON fully welded ball valve when an actuator is installed.
For additional dimensional information on CAMERON fully welded ball valves, contact your sales representative.

27
TOP WORKS DIMENSIONS
Square Nut and Adapter Flange (BX-1220)

C
P

Mounting Dimensions
Dash Number -1 -2 -3
Valve Stem Size in. 1.00 1.50 2.00
A Flange Diameter 6.50 6.50 8.75
B Boss Diameter 4.747 4.747 6.997
C Height of Nut 1.94 2.12 2.62
D Bolt Size 0.44 0.54 0.66
F Width of Nut 1.50 2.00 2.50
H Number of Holes 8 8 16
J Diameter Bolt Circle 5.75 5.75 8.00
P Boss Height 0.328 0.328 0.328
Flange Bolt Size 3/8-16 NC-2 3/8-16 NC-2 3/8-16 NC-2
Bolt Torque (ft-lb) 30 30 30
Dash Number -1 -2 -3
Valve Stem Size mm 25.40 38.10 50.80
A Flange Diameter 165.10 165.10 222.25
B Boss Diameter 120.57 120.57 177.72
C Height of Nut 49.28 53.85 66.55
D Bolt Size 11.18 13.72 16.76
F Width of Nut 38.10 50.8 63.50
H Number of Holes 8 8 16
J Diameter Bolt Circle 146.05 146.05 203.20
P Boss Height 8.33 8.33 8.33
Flange Bolt Size 3/8 to 16 NC-2 3/8 to 16 NC-2 3/8 to 16 NC-2
Bolt Torque (N·m) 40.68 40.68 40.68

Notes: -1 and -2 bolt holes straddle centerline.

-3 bolt holes are on centerline.

28
Keyed Shaft and Adapter Flange (BX-1221)

S R
J Q

W N

H
K

Mounting Dimensions
Dash Number -4 -5 -6 -7 -8 -9 -10 -11
Valve Stem Size in. 3.00 4.00 5.00 7.50 9.00 11.00 13.00 15.00
A Number of Holes 16 16 24 24 24 28 28 32
C Diameter Bolt Circle 10.375 17.25 18.375 24.00 31.00 27.50 27.50 36.00
E Max Shaft Diameter 2.745 3.245 4.495 5.495 6.245 8.995 8.995 -
F Boss Diameter 9.122 16.246 17.121 21.746 28.308 25.496 25.496 33.496
H Key Seat 2.402 2.831 3.786 4.803 5.409 7.887 6.774 -
J Height of Nut 4.75 5.310 6.25 8.50 9.13 13.31 13.31 19.25
K Flange Diameter 11.50 18.25 19.380 25.75 32.75 30.00 30.00 39.00
N Flange Thickness 0.63 0.63 0.63 1.00 1.00 1.25 1.25 1.50
Q Key Width 0.625 0.75 1.25 1.25 1.50 2.00 2.00 2.25
R Key Length 3.75 4.310 5.250 7.50 8.13 12.00 12.00 17.50
S Overall Height 6.120 7.00 8.120 11.00 11.75 16.12 15.84 21.50
V Adapter Flange Thickness 1.00 1.00 1.00 1.00 1.00 1.25 1.25 1.50
(Max.)
W Boss Height 0.328 0.328 0.328 0.328 0.328 0.328 0.328 0.328
Flange Bolt Size 1/2-13 NC-2 1/2-13 NC-2 1/2-13 NC-2 7/8-9 NC-2 7/8-9 NC-2 1 1/4-8 NC-2 1 1/4-8 NC-2 1 1/4-8 NC-2
Bolt Torque (ft-lb) 60 60 63 330 330 1000 1000 1600
Dash Number -4 -5 -6 -7 -8 -9 -10 -11
Valve Stem Size mm 76.20 101.60 127.00 190.50 228.60 279.40 330.20 381.00
A Number of Holes 16 16 24 24 24 28 28 32
C Diameter Bolt Circle 263.53 438.15 466.73 609.60 787.40 698.50 698.50 914.40
E Max Shaft Diameter 69.73 82.43 114.18 139.58 158.63 228.48 228.48 -
F Boss Diameter 231.69 412.64 434.87 552.34 719.02 647.59 647.59 850.79
H Key Seat 61.01 71.91 96.16 122.00 137.38 200.32 172.05 -
J Height of Nut 120.65 134.88 158.75 215.90 231.91 338.03 338.03 488.95
K Flange Diameter 292.10 463.55 492.26 654.05 831.85 762.00 763.00 990.60
N Flange Thickness 16.00 16.00 16.00 25.40 25.40 31.75 31.75 38.10
Q Key Width 15.88 19.05 31.75 31.75 38.10 50.80 50.80 57.15
R Key Length 95.25 109.48 133.35 190.50 206.51 304.80 304.80 444.50
S Overall Height 155.45 177.80 206.25 279.40 298.45 409.45 402.34 546.10
V Adapter Flange Thickness 25.40 25.40 25.40 25.40 25.40 31.75 31.75 38.10
(Max.)
W Boss Height 8.33 8.33 8.33 8.33 8.33 8.33 8.33 8.33
Flange Bolt Size 1/2 to 13 NC-2 1/2 to 13 NC-2 1/2 to 13 NC-2 7/8 to 9 NC-2 7/8 to 9 NC-2 1-1/4 to 8 NC-2 1-1/4 to 8 NC-2 1-1/4 to 8 NC-2
Bolt Torque (N·Xm) 81 81 85 447 447 1356 1356 2169

Notes: -7 through -11 bolt holes straddle centerline.

-4 through -6 holes are on centerline.

29
TOP WORKS DIMENSIONS – MANUAL GEAR DIMENSIONS
DYNATORQUE™

M Q

N
P

Stem Size Number of Weight

Effective
Turns Per
in. (mm) Model Ratio M N P Q lb (kg)
90 Degrees
1.0 (25.4) DT21 22.5:1 15 3.56 (90) 3.54 (90) 1.63 (41) 3.63 (92) 36 (16)
1.5 (38.1) DT21 22.5:1 15 3.56 (90) 3.54 (90) 1.63 (41) 3.63 (92) 36 (16)
2.0 (50.8) DT40 27.6:1 19.75 5.68 (144) 4.83 (123) 2.25 (57) 4.63 (118) 75 (34)
3.0 (76.2) DT54 91.2:1 79.5 5.66 (144) 6.83 (173) 4.94 (125) 4.30 (109) 108 (49)

CAMERON

M Q M Q

P
N N

Cameron Gear Box Cameron Gear Box

Stem Size: 3” and 4” (80 mm and 100 mm) Stem Size: 5”, 7.5” and 9” (125 mm, 190 mm and 230 mm)

Stem Size Number of Weight

Effective
Turns Per
in. (mm) Model Ratio M N P Q lb (kg)
90 Degrees
3.0 (76.2) WG1/B6 55:1 60 5.75 (146) 7.56 (192) 4.11 (104) 12.64 (321) 127 (58)
4.0 (101.6) WG1/B6 110:1 112.5 9.13 (232) 8.69 (221) 4.69 (119) 12.64 (321) 211 (96)
5.0 (127.0) WG1/S12 153:1 190 9.69 (246) 10.25 (260) 5.50 (140) 9.50 (241) 364 (165)
7.5 (190.5) WG1/S12 297:1 297 12.88 (327) 12.63 (321) 6.63 (168) 14.00 (356) 581 (264)
9.0 (228.6) WG1/S12 432:1 428 16.37 (416) 14.77 (375) 7.39 (188) 19.50 (495) 793 (360)

30
 Services for Valves and Actuation

WE BUILD IT. WE BACK IT.

Global Network and Local Support
Cameron is well-positioned to deliver total valve support,
quickly and efficiently, with unmatched OEM expertise.
Our highly skilled engineers and technicians are available
around the clock, seven days a week to respond to
customer queries, troubleshoot problems, and offer
reliable solutions.

Easily Accessible Parts and Spare Valves

• OEM spare valves, actuators, and parts (including
non-Cameron brands)
• Handling, storage, packaging, and delivery
• Dedicated stocking program

Comprehensive Services Portfolio

• Parts and spare valves
• Repair
• Field services
• Preventative maintenance
• Equipment testing and diagnostics
• Remanufacturing
• Asset preservation
• Customer property management
• Training and recertification services
• Warranty

Customized Total Valve CareSM (TVC) Programs

Customized asset management plans that optimize
uptime, availability, and dedicated services.
• Engineering consultancy
• Site management
• Flange management
• Startup and commissioning
• Spare parts and asset management
• Operational support

USA • CANADA • LATIN AMERICA • EUROPE • RUSSIA • AFRICA • MIDDLE EAST • ASIA PACIFIC

31
Trademark Information

CAMERON is a registered trademark of Cameron.

This document contains references to registered trademarks or product designations,
which are not owned by Cameron.

Trademark Owner
TEFLON E.I. DuPont De Nemours & Company

32
33
 3250 Briarpark Drive, Suite 300
Houston, TX 77042
USA
Tel 1 281 499 8511

For more information on CAMERON ball valves:

www.c-a-m.com/valves
[email protected]

ENVIRONME
ND N
A

TA
TH SAFETY

LE

HSE Policy Statement

XCELLEN

At Cameron, we are committed ethically, financially and personally to a

working environment where no one gets hurt and nothing gets harmed.
AL

CE
HE

CA
MERON

© 2015 Cameron | CAMERON and all brands listed are registered trademarks of Cameron. DYNATORQUE is a trademark of Cameron. Total Valve Care is a service mark of Cameron.
All brands listed are registered trademarks or trademarks of their respective companies. | 06/15 AD00825V