Tightening Torques: Dv4C, Dv6C, Dv6Dted, Dv6Eted, Dv6Uc, Dv6 Ue6 Engines

30.01.
2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines
TIGHTENING TORQUES : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6

ENGINES
1 - CYLINDER HEAD
1 - 1 - Tightening torques
b1bb0pmd
Reference Designation Tightening torque

Pre-tighten to 2 daNm
(1) bolts (Cylinder head) (*) (**) Tightening to 4 m.daN
Angular tightening to 260°
(2) bolts (Rear upper timing cover ) (*) 1 daNm
Pre-tighten to 0,5 daNm
(3) bolts (Oil trap) (*)
Tightening to 1,3 m.daN
(4) bolts (Camshaft bearings covers) (*)
Tightening to 1 m.daN
(5) bolts ( vacuum pump)
(6) bolts ( vacuum pump)
(7) bolts ( lifting bracket ) 2 daNm
(8) nuts (Exhaust manifold heat shield) 0,8 daNm
(9) nuts (Exhaust manifold) (*) (**) 2,5 daNm
(10) studs (Exhaust manifold) 1 daNm
(11) Pre-heater plugs 0,6 daNm
(*) Follow the tightening sequence
(**) Always to be replaced whenever removed
1 - 2 - Sequence of tightening the bolts (1)
mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 1/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines
b1bb1mhd
WARNING :
Follow the tightening sequence
1 - 3 - Sequence of tightening of screws (2) and (3)
b1bb0mid
(2) bolts (Rear upper timing cover ).
(3) bolts (Oil trap).
WARNING :
b1bb1mid
WARNING :
1 - 5 - Sequence of tightening of nuts (9)
b1jp0a5d
WARNING :
2 - CYLINDER BLOCK
b1bb0mjd

(1) Caps (Cylinder block ) 3,2 daNm
(2) bolts (Conrods) Tightening to 1 m.daN
bolts (Double damped flywheel) (according to equipment) (*) Pre-tighten to 0,8 daNm
(**) Tightening to 3 m.daN
(3)
bolts (Engine flywheel) (according to equipment) (*) (**)
(4) bolts (Crankshaft main bearing cap casing) (*)
(5) bolts (Crankshaft main bearing cap casing) (*)
Angular slackening of 180°
(6) bolts (Bearing caps) (*)
(7) bolts (Accessories drive pulley) (**)
studs (Catalytic converter/particle filter assembly) (according
(8) 0,6 daNm
to equipment)
b1bb1mld
WARNING :
2 - 3 - Sequence of tightening of screws (4), (5) and (6)
b1db01bd
(4) bolts (Crankshaft main bearing cap casing) ( bolts M6 ).
(5) bolts (Crankshaft main bearing cap casing) ( bolts M6 ).
(6) bolts (Bearing caps) ( bolts M9 ).
WARNING :
Tightening procedure :
Pre-tightening of the 10 bolts (6) to 1 m.daN (from 1 to 10)

Pre-tightening of the 14 bolts (5) to 0,6 m.daN (from 11 to 24)
Tightening of the 2 bolts (4) to 0,8 m.daN (inside the flywheel bell housing)
Slackening of the bolts (6) by 180°
Tightening of the 10 bolts (6) to 3 m.daN (from 1 to 10)
Angular tighten the screws (6) to 140 ° (from 1 to 10)
Tightening of the 14 bolts (5) to 0,8 m.daN (from 11 to 24)
3 - LUBRICATION
b1fb00zd

(1) bolts (Oil pump assembly ) (*)
(2) Oil level sensor 3 daNm
(3) Banjo bolt (Turbocharger lubricating pipe) 3 daNm
(4) bolts (Turbocharger lubrication return pipe) 0,8 daNm
(5) collars (Turbocharger lubrication return pipe) 0,3 daNm
(6) Oil filter cover 2,5 daNm
(7) bolts (Oil filter support) 1 daNm
(8) bolts (Turbocharger electrovalve support) 1 daNm
(9) bolts ( sump) 1,2 daNm
(10) bolts ( coolant/oil heat exchanger) 1 daNm
(11) drain plug 3,4 daNm
(12) Oil pressure switch 3,2 daNm
(13) bolts (Dipstick guide tube) 0,8 daNm
(14) studs ( sump) 0,8 daNm
(15) bolts (Oil suction strainer) 1 daNm
(16) bolts (Piston skirt spray jets) 2 daNm
(17) bolts (Oil filler return tube) 1 daNm
3 - 2 - sump - Except DV6UC engine
b1fa00wd
(9a) nut( sump).
(9b) bolts ( sump).
(14) studs ( sump).
3 - 3 - sump - DV6UC engine
b1bb1dcd
Lower oil sump :
(9a) nuts (2 nuts )

(9b) bolts ((15) bolts )
(14a) studs (2 studs )
Upper oil sump :
(9c) bolts (7 bolts )

(9d) nuts (2 nuts )
(14b) studs (2 studs )
3 - 4 - Sequence of tightening the bolts (1) (previous fitting)
b1fb010d
WARNING :
3 - 5 - Sequence of tightening the bolts (1) (new fitting)
b1bb1y7d
WARNING :
4 - TIMING GEAR
b1eb00ed
Reference Fixings Tightening torque

(1) bolts (Camshaft pulley )
(2) bolts (Camshaft bearing caps) (*)
(3) nut(Timing belt roller bearing ) 3,7 daNm
(4) Stud (Timing belt roller bearing ) 0,6 daNm
(5) bolts (Shift prevention bracket) 0,6 daNm
(6) bolts (Engine speed sensor ) 0,8 daNm
(7) bolts (Timing belt tensioner roller) 3 daNm
(8) bolts (Lower timing cover) 0,5 daNm
(9) bolts (Upper timing cover ) 0,4 daNm
(10) bolts (Camshaft position sensor) 0,8 daNm
b1bb1mmd
WARNING :
5 - TURBOCHARGING CIRCUIT
5 - 1 - Engines DV4 euro 5(STOP AND START version) Or DV6 engines all types
b1bb0thd
Tightening
ReferenceDesignation
torque
(1) bolts (Inlet air metering unit ) 0,8 daNm
(2) bolts (Inlet air pressure and temperature sensor) 0,8 daNm
(3) bolts (Air filter chamber) 0,8 daNm
(4) bolts (Air filter cover) 0,5 daNm
(5) bolts (Air filter unit mounting) 0,8 daNm
(6) bolts (Air flow meter ) 0,3 daNm

(7) bolts (Turbocharger inlet duct) 0,7 daNm
(8) nut(Variable geometry turbocharger control solenoid valve) 0,8 daNm
(9) nut( turbocharger) (**) 2,6 daNm
(10) bolts (Turbocharger air cooler) 0,8 daNm
(11) Clip (Air union) (***)
(12) bolts (Turbo air cooler by-pass unit) 0,8 daNm
(13) bolts (Turbocharger noise attenuator ) 0,7 daNm
(14) bolts (Air inlet manifold) 0,8 daNm
(***) According to equipment
5 - 2 - Engine DV4 EURO 5 (Without stop and start)
b1bb0tid

(1) bolts (Inlet air metering unit ) 0,8 daNm
(2a) bolts (Inlet air pressure sensor) 0,8 daNm
(2b) bolts (Inlet air temperature sensor) 0,8 daNm
(3) bolts (Air filter chamber) 0,8 daNm
(4) bolts (Air filter cover) 0,5 daNm
(5) bolts (Air filter unit mounting) 0,8 daNm
(6) bolts (Air flow meter ) 0,3 daNm
(7) bolts (Turbocharger inlet duct) 0,7 daNm
nut(Variable geometry turbocharger control
(8) 0,8 daNm
solenoid valve)
(9) nut( turbocharger) (**) 2,6 daNm
(11) Clip (Air union) (***)
(13) bolts (Turbocharger noise attenuator ) 0,7 daNm
(14) bolts (Air inlet manifold) 0,8 daNm
(15) collars (Hoses ) 2,5 daNm
(16) bolts (Vacuum circuit) 0,8 daNm
(***) According to equipment
5 - 3 - (***) Screw clip (11) (Air union)
b1bb22fd
Distance Distance
Reference
Designation Tightening torque
"A" "B"
9 mm 7 mm 0,35 daNm
(11) Clip (Air union)
12 mm 8 mm 0,5 daNm
6 - EXHAUST GAS RECIRCULATION CIRCUIT
6 - 1 - All engines except DV6C UE6
b1kb006d
ReferenceDesignation Tightening torque

(1) bolts (EGR exchanger module) 0,8 daNm
(2) bolts (EGR pipe) 0,8 daNm
(3) nut(EGR exchanger module) 0,8 daNm
(4) bolts (EGR exchanger module) 2 daNm
(5) nut(EGR (exhaust gas recycling) electrovalve) 0,8 daNm
(6) bolts (EGR electrovalve support) 0,8 daNm

(7) bolts (Coolant inlet manifold) 2 daNm
(8) bolts (Coolant pipe) 0,8 daNm
(9) bolts (Vacuum pipe support) 0,8 daNm
6 - 2 - DV6C UE6 engines
b1bb22gd

(1) bolts (EGR exchanger module) 0,8 daNm
(2) bolts (EGR pipe) 0,8 daNm
(3) nut(EGR exchanger module) 0,8 daNm
(4) bolts (EGR exchanger module) 2 daNm
(5) nut(EGR (exhaust gas recycling) electrovalve) 0,8 daNm
(6) bolts (EGR electrovalve support) 0,8 daNm
(8) Stud (Air filter support) 0,8 daNm
(9) bolts (Vacuum pipe support) 0,8 daNm
6 - 3 - Exhaust gas recirculation electric valve
b1bb1xod

(10) bolts (Exhaust gas recirculation electric valve) 1 daNm
7 - ENGINE COOLING SYSTEM
b1gb00dd

(1) bolts (Coolant outlet housing) (*)
(2) bolts (Coolant pump) (*)
(4) bolts (Coolant pipe) 0,8 daNm
b1bb1mjd
WARNING :
b1bb1mkd
WARNING :
8 - INJECTION SYSTEM
8 - 1 - injection CONTINENTAL(DV6C and DV6 UE6 engines)

b1bb1mfd

Pre-tighten to 2
daNm
(1) Connections (Diesel injector ) (**)
Tightening to 2,5
m.daN
Pre-tighten to 2
Connections (Fuel high pressure pipes / Fuel high daNm
(2)
pressure common injection rail ) (**) Tightening to 2,5
m.daN
Pre-tighten to 2
Union (High-pressure fuel pipe / Fuel high pressure daNm
(3)
pump) (**) Tightening to 2,5
m.daN
(4) bolts (Fuel high pressure pump rear bracket) 1 daNm
Pre-tighten to 0,7
daNm
(6) bolts (Diesel injector fixing flange)
Angular tightening
to 80°
(7) bolts (Fuel high pressure pump front bracket) 2 daNm
(8) bolts (Fuel injection pump / Bracket ) 2 daNm
(9) Fuel injection pump pulley nut 5 daNm
bolts (Fuel high pressure common injection rail / Engine
(11) 2 daNm
block)
(12) Fuel high pressure sensor 4,5 daNm
Pre-tighten to 0,3
bolts (Fuel pressure regulator / Fuel high pressure daNm
(13)
pump) Tightening to 0,7
m.daN
8 - 2 - BOSCH injection All engine types except DV6C and DV6 UE6
b1bb1mgd

(1) Connections (Diesel injector ) (**) Tightening to 2,5
m.daN
Connections (Fuel high pressure pipes / Fuel high
(2) Tightening to 2,5
pressure common injection rail ) (**)
m.daN
Union (High-pressure fuel pipe / Fuel high pressure
(3) Tightening to 2,5
pump) (**)
m.daN
Pre-tighten to 0,7
daNm
(6) bolts (Diesel injector fixing flange)
Angular tightening to
80°
(7) bolts (Fuel high pressure pump front bracket) 2 daNm
(8) bolts (Fuel injection pump / Bracket ) 2 daNm
(9) Fuel injection pump pulley nut 5 daNm
bolts (Fuel high pressure common injection rail /
(11) 2 daNm
Engine block)
(12) Fuel high pressure sensor 4,5 daNm
Pre-tighten to 0,3
bolts (Fuel pressure regulator / Fuel high pressure daNm
(13)
pump) Tightening to 0,7
m.daN
8 - 3 - Fuel filter
b1bb22hd

(14) bolts (Fuel filter cover) 0,3 daNm
(15) bolts (Fuel filter ) 0,8 daNm
(16) bolts (Fuel filter support) 0,8 daNm
9 - ENGINE EQUIPMENT - WITHOUT STOP AND START
9 - 1 - Alternator - Without stop and start
d1cb004d

(1) bolts (Multifunction support) 2 daNm
(2) bolts (Alternator ) 4,9 daNm
(3) nut(Alternator power circuit ) 1,6 daNm
9 - 2 - Version with air conditioning
c5hb00od

(5) bolts (Air conditioning compressor support) 2 daNm
(7) bolts ( air conditioning compressor) 2,4 daNm
(8) studs (Air conditioning compressor support) 0,6 daNm
9 - 3 - Version without air conditioning
b1bb0tkd


(5) bolts (Support for auxiliary equipment) 2 daNm
9 - 4 - Dynamic roller tensioner - Electric power steering - Without stop and start
b1bb0mkd

(1) bolts (Alternator upper support) 2 daNm
(9) bolts (Dynamic roller tensioner ) 2 daNm
9 - 5 - Dynamic roller tensioner - Hydraulic power steering - Without stop and start
b1bb1djd

(3) nut (Alternator power circuit ) 1,6 daNm

(10) bolts (Roller tensioner) 4,5 daNm
(11) bolts (Automatic roller tensioner ) 3 daNm
(12) bolts (Automatic roller tensioner ) 2,1 daNm
10 - ENGINE EQUIPMENT - STOP AND START VERSION
10 - 1 - Reversible alternator - STOP AND START version
b1bb22id

(1) bolts (Multifunction support) 2 daNm
(2) nut(Alternator power circuit ) 1,6 daNm
(3) bolts (Reversible alternator) 4,3 daNm
(5) nuts (Air conditioning compressor support) 2 daNm
10 - 2 - Version with air conditioning - STOP AND START version
b1bb22jd

(9) nuts (Air conditioning compressor support) 2 daNm
(10) bolts ( air conditioning compressor) 2,4 daNm
10 - 3 - Version without air conditioning - STOP AND START version
b1bb22kd

(11) bolts (Ancillary drive belt roller pulley support) 2 daNm
10 - 4 - Dynamic tensioner rollers - STOP AND START version
b1bb22ld

(12) bolts (Upper dynamic tensioner roller) 2 daNm
(13) bolts (Lower dynamic tensioner roller) 2 daNm
11 - STARTER
d1bb00hd
Reference Fixings Tightening torque

(1) bolts (Starter (*) 2 daNm
(2) nut(Starter supply cable) 1 daNm
(3) nut(Starter energising cable) 0,5 daNm
d1bb00kd
WARNING :

Tightening Torques: Dv4C, Dv6C, Dv6Dted, Dv6Eted, Dv6Uc, Dv6 Ue6 Engines

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Tightening Torques: Dv4C, Dv6C, Dv6Dted, Dv6Eted, Dv6Uc, Dv6 Ue6 Engines

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tightening Torques: Dv4C, Dv6C, Dv6Dted, Dv6Eted, Dv6Uc, Dv6 Ue6 Engines

Uploaded by

Copyright:

Available Formats

30.01.

TIGHTENING TORQUES : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6

Reference Designation Tightening torque

1 - 2 - Sequence of tightening the bolts (1)

1 - 3 - Sequence of tightening of screws (2) and (3)

(2) bolts (Rear upper timing cover ).

(3) bolts (Oil trap).

1 - 4 - Sequence of tightening the bolts (4)

1 - 5 - Sequence of tightening of nuts (9)

Reference Designation Tightening torque

2 - 2 - Sequence of tightening the bolts (3)

2 - 3 - Sequence of tightening of screws (4), (5) and (6)

(4) bolts (Crankshaft main bearing cap casing) ( bolts M6 ).

(5) bolts (Crankshaft main bearing cap casing) ( bolts M6 ).

(6) bolts (Bearing caps) ( bolts M9 ).

Pre-tightening of the 10 bolts (6) to 1 m.daN (from 1 to 10)

Reference Designation Tightening torque

3 - 2 - sump - Except DV6UC engine

(9a) nut( sump).

(9b) bolts ( sump).

(14) studs ( sump).

3 - 3 - sump - DV6UC engine

Lower oil sump :

(9a) nuts (2 nuts )

Upper oil sump :

(9c) bolts (7 bolts )

3 - 4 - Sequence of tightening the bolts (1) (previous fitting)

3 - 5 - Sequence of tightening the bolts (1) (new fitting)

Reference Fixings Tightening torque

4 - 2 - Sequence of tightening the bolts (2)

(6) bolts (Air flow meter ) 0,3 daNm

5 - 2 - Engine DV4 EURO 5 (Without stop and start)

Reference Designation Tightening torque

5 - 3 - (***) Screw clip (11) (Air union)

6 - EXHAUST GAS RECIRCULATION CIRCUIT

6 - 1 - All engines except DV6C UE6

ReferenceDesignation Tightening torque

(6) bolts (EGR electrovalve support) 0,8 daNm

6 - 2 - DV6C UE6 engines

ReferenceDesignation Tightening torque

6 - 3 - Exhaust gas recirculation electric valve

Reference Designation Tightening torque

7 - ENGINE COOLING SYSTEM

Reference Designation Tightening torque

7 - 2 - Sequence of tightening the bolts (1)

7 - 3 - Sequence of tightening the bolts (2)

8 - 1 - injection CONTINENTAL(DV6C and DV6 UE6 engines)

ReferenceDesignation Tightening torque

ReferenceDesignation Tightening torque

Reference Designation Tightening torque

9 - ENGINE EQUIPMENT - WITHOUT STOP AND START

9 - 1 - Alternator - Without stop and start

Reference Designation Tightening torque

9 - 2 - Version with air conditioning

Reference Designation Tightening torque

9 - 3 - Version without air conditioning

Reference Designation Tightening torque

(4) bolts (Alternator ) 4,3 daNm