Scribd
Upload
88 views1 page

Magod Fusion Technologies PVT Limited: Manufacturing Process and Inspection Plan For Laser Welding

This document outlines the manufacturing process and inspection plan for laser welding of parts at Magod Fusion Technologies Pvt Limited. It details the incoming inspection process, laser welding parameters according to the standard operating procedure, inspection steps after welding to check for defects, packing, and dispatch. The frequency of inspection is specified as 100% for most characteristics to ensure quality.

Uploaded by

Samadhan More
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
88 views1 page

Magod Fusion Technologies PVT Limited: Manufacturing Process and Inspection Plan For Laser Welding

This document outlines the manufacturing process and inspection plan for laser welding of parts at Magod Fusion Technologies Pvt Limited. It details the incoming inspection process, laser welding parameters according to the standard operating procedure, inspection steps after welding to check for defects, packing, and dispatch. The frequency of inspection is specified as 100% for most characteristics to ensure quality.

Uploaded by

Samadhan More
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

DOC NO.

- MF/PRD/003 REV- 00

MAGOD FUSION TECHNOLOGIES PVT LIMITED


W-105, S - BLOCK, BHOSARI MIDC, PUNE 411026

MANUFACTURING PROCESS AND INSPECTION PLAN FOR LASER WELDING


CUSTOMER NAME & ADDRESS MANUFACTURER'S / DESCRIPTION: Manufacturing Process Plan No.
Kalyani Technoforge Ltd. SUPPLIER'S NAME & ADDRESS Part Name/s: Pinion Wheel 3 Assy, Pinion Wheel 4/5 Assy, Gear 1/2 Assy, MF/PRD/003/08-01
Plot No. I-21, DTA Khed City, Gear 4/5 Assy, Reverse Output Gear Assy, Assy Rev. Gear on MS
Village Kanersar, Tal. Khed, MAGOD FUSION TECHNOLOGIES Part No/s.: G 03027/70/588, G 03021/60/590, G 03023/60/583, G 03028/60/589, Date - 10.05.2017
Dist. Pune 410505 PVT. LTD. G 03017/60/593, YT 686 260 02 25
W 105, S - Block, Bhosari MIDC, Drawing No/s.: Pinion Wheel 3 Assy, Pinion Wheel 4/5 Assy, Gear 1/2 Assy,
Pune 411026 Gear 4/5 Assy, Reverse Output Gear Assy, Assy Rev. Gear on MS

SR. Characteristics Specification Equipment Used Type of Check Frequency Acceptance Norm Remarks
NO.

Incoming Inspection/ Cleam with isopropyl


10 Cleaning Free from Oil and Dust alcohol and dry by Visual 100% No loose fitting
{Prior to Welding} compressed air

20 First Piece Approval First Piece Inspetion Report, Manual, Microscope Visual 1 per Lot Weld Penetration Optical Microcsopic Report
DOC No. MF/INR/001 2.4 + 0.5 mm Doc. No. MF/MTR/001

Laser Cell 1
Robot Program Name : As Per SOP-
30 Laser Welding Process Set parameter as per Parameter KTFL Visual 100% MF/PRC/003 REV:01
No. W/005 Weld Penetration
Laser Program Name : 2.4 + 0.5 mm
KTFL

Part free from Spatter,


40 Unloading from fixture Part free from Spatter, Blow hole Manual Visual 100%
Blow hole

Check visually for Welding


Free from all welding Final Inspection Report
50 Final Inspection After Welding defects such as Cracks, Blow hole Manual Visual 100% defects MF/INR/004
etc.

Outward Qty. matches


60 Packing & Despatch Number Incoming Bins, Manual Qty 100%
to Inward Qty.

Cutomer Approval: Kalyani Technoforge


PREPARED BY APPROVED BY Ltd.

Samadhan More Harshad Natu REVIEVED BY

You might also like