Scribd
Upload
39 views1 page

Sectional Drawing Tag Numbers Bill of Material: Leser GMBH & Co. KG, Germany

This document contains a bill of materials and technical specifications for a valve. The bill of materials lists the materials, grades, and quantities for 14 components of the valve including the angular body, nozzle, disc, guide, and bonnet which are made of materials like carbon steel and stainless steel. The technical specifications provide additional details on the valve such as its type, bonnet type, orifice size, pressure ratings, inlet and outlet connections, dimensions, and weight.

Uploaded by

ashish shrivastav
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views1 page

Sectional Drawing Tag Numbers Bill of Material: Leser GMBH & Co. KG, Germany

This document contains a bill of materials and technical specifications for a valve. The bill of materials lists the materials, grades, and quantities for 14 components of the valve including the angular body, nozzle, disc, guide, and bonnet which are made of materials like carbon steel and stainless steel. The technical specifications provide additional details on the valve such as its type, bonnet type, orifice size, pressure ratings, inlet and outlet connections, dimensions, and weight.

Uploaded by

ashish shrivastav
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Sectional Drawing Tag Numbers Bill of Material

Pos. Description Material Grade Qty. Remarks


1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4408/SA-351 CF8M - SS 1 stellited
7 Disc 1.4122 - SS 1 Hardened
8 Guide 1.0460/SA-105 - CS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4021 - SS 1
16 Spring plate 1.0460/SA-105 - CS 1
17 Spring plate 1.0460/SA-105 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 0.7040/60-40-18 - Cast Iron 1
52 Spring - - not applicable
53 Spring 1.8159 or 1.7102 or FDSiCr-CS 1
Valve Application 54 Spring 1.8159 or 1.7102 or FDSiCr-CS 1
Description Valve Data 55 Stud 1.4401/ A4-70/ SA-193+320 B8M - SS 12
Article No. 5263.5642 56 Nut 1.4401/ A4-70/ SA-194 8M - SS 12
Product Group API 60 Gasket Graphit/1.4401 - SS 2
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice R
d0 126,0 mm 4,961 "
Set Pressure 1.400,00 kPa-g
Cold Diff Test Pressure (cdtp) 1.400,00 kPa-g
Inlet Connection NPS 6"
CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 10"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 429,6 kg
a 240 mm
b 267 mm
H 1.362 mm
s1 68 mm 00 Issue for approval SAP ST 21.01.2020
s2 31 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 20435376 / 20


Ref. Job-No. / item
Client PO-No. 19011 34645
Client Leser UK Limited
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000478559-00

You might also like