Ericsson ML 6690 Product
overview
Topics Covered
• Overview on Ericsson Product series 6690
• Hardware Types and Description for 6692
• Power Conditions and Thresholds for 6692
• Features and Functionalities 6692
• Product Overview
MINI-LINK 6600 provides a switch capacity of up
to 88 Gbps and can connect upto 16 split
mounted radio links due to being equipped with
dual carrier modems. 1 Gbps and 10 Gbps
interfaces, fiber rings and E-band links can also be
connected to the node.
The node supports radio links with high modulation
of 4096 QAM
MINI-LINK 6600 offers both compact nodes and
nodes using plug-in units, which make it easy to
customize configurations and make future
upgrades.
• Product Overview
The full range of MINI-LINK outdoor units can easily
be combined in many different ways: traditional
frequencies (6–42 GHz), V-band 60 GHz, E-band
70/80 GHz, single and dual carrier.
Different packet migration strategies are
supported by MINI-LINK 6600. For cost efficient
migration MINI-LINK 6600 are hop compatible with
MINI-LINK TN
The full range of MINI-LINK outdoor units can easily
be combined in many different ways: traditional
frequencies (6–42 GHz), V-band 60 GHz, E-band
70/80 GHz
• Product Overview : Basic
Architecture
Basic Node and Radio Terminals
• Product Overview :
Product Family
• Product Overview :
Product Family
The MINI-LINK 6600 product family:
MINI-LINK 6651 (Compact Node)
MINI-LINK 6654 with PNM 1001 or PNM 1002
MINI-LINK 6655 with PNM 1002
MINI-LINK 6691 with NPU 1002, NPU 1003, or NPU 1005
MINI-LINK 6692 with NPU 1002 or NPU 1005
MINI-LINK 6693 with NPU 1002, NPU 1003, or NPU 1005
MINI-LINK 6694 with NPU 1002, NPU 1003, or NPU 1005
• Product Overview :
Product Family
Additional Details for above comparison –
Symbols used in the block
(1) 20.5 Gbps is reserved for future use.
(2) NPU protection can be used with two NPU 1002s or
two NPU 1005s.
Modules MMU, LTU and ETU can be used on all
nodes from MINILINK 6654 to MINILINK 6694
The interconnection between the outdoor part
(radios and antennas) and the indoor part is one
coaxial cable per carrier interface. This cable carries
full duplex traffic, DC supply voltage, and
management data.
• Product Overview :
Product Family
MINI-LINK 6651
There are three variants, MINI-LINK 6651/1, MINI-
LINK 6651/2 and MINI-LINK 6651/3.
MINI-LINK 6651/1 and MINI-LINK 6651/2 have a
replaceable Fan Unit that provides cooling for the
indoor part.
MINI-LINK 6651/3 has no Fan Unit.
• Product Overview :
Product Family
MINI-LINK 6654(2 APU)
Slot 2 full slot on top for PNM1 & 2(Power, NPU and
Modem)
The MMUs, LTUs, and ETUs are placed in the
Application Plug-in Unit (APU) slots, that is, slots 1
and 3 as half slot.
Slot 0 for FAU 1401
MINI-LINK 6655(5 APU)
Slot 3 full slot on top for NPU
The MMUs, LTUs, and ETUs are placed in the
Application Plug-in Unit (APU) slots, that is, slots 1,2,
4 & 5 as half slot.
• Product Overview :
Product Family
MINI-LINK 6690
MINI-LINK 6691 with NPU 1002, NPU 1003, or NPU
1005
MINI-LINK 6692 with NPU 1002 or NPU 1005
MINI-LINK 6693 with NPU 1002, NPU 1003, or NPU
1005
MINI-LINK 6694 with NPU 1002, NPU 1003, or NPU
1005
• Product Overview :
Product Family
MINI-LINK 6691
Slot 1 & 3 for APUs
Slot 2 for PFU and Slot 4 for NPU
• Product Overview :
Product Family
MINI-LINK 6692
Slot 1, 2, 5, 6, 7, 8, 11 & 12 for APUs
Slot 3 & 4 for PFU and Slot 9 & 10 for NPU
• Product Overview :
Product Family
MINI-LINK 6693
Slot 1, 2, 4 & 5 for APUs
Slot 3 for PFU and Slot 6 for NPU
• Product Overview :
Product Family
MINI-LINK 6694
Slot 1, 2, 5 & 6 for APUs
Slot 3 & 4 for PFU and Slot 7 & 8 for NPU
• Product Overview : HW
types and Description
NPU 1002
NPU 1002 has two fixed electrical LAN
10/100/1000BASE-T Ethernet interfaces, one SFP
cage supporting 1 Gpbs, and two SFP+ cages
supporting SFP+ up to 10 Gbps on the front. One
of the fixed Ethernet ports can be configured as a
site LAN port.
• Product Overview : HW
types and Description
NPU 1005
NPU 1005 has two fixed electrical LAN
10/100/1000BASE-T Ethernet interfaces, one SFP
cage, and two SFP+ cages on the front. One of
the fixed Ethernet ports can be configured as a
site LAN port.
• Product Overview : HW
types and Description
MMU 1001
MMU 1001 is a single carrier modem supporting
Hitless Adaptive Modulation and Ethernet.
On two modems, the following is supported:
— 2+0 RLB with Equipment Protection (EQP)
— 1+1 RLP with EQP
• Product Overview : HW
types and Description
MMU 1002
MMU 1002 is a dual carrier modem. With one
modem, the foll
— Single WAN 1+0
— Single WAN 2+0 Radio Link Bonding (RLB)
— Dual WAN 2×(1+0)
— Single WAN 1+1 Radio Link Protection
(RLP)owing are supported:
• Product Overview : HW
types and Description
MMU 1002
With two modems, the following are supported :
— 1+1 RLP with Equipment Protection (EQP)
— 2+2 RLP with EQP
— 2+0 RLB with EQP
— 4+0 RLB with EQP
• Product Overview : HW
types and Description
LTU 1001
LTU 1001 is a Line Termination Unit (LTU) with 16
E1/DS1 ports for PDH
Interfaces - 16×E1/DS1(4 X 4 E1s through Tributary
Cables
• Product Overview : HW
types and Description
LTU 1002
LTU 1002 is a Line Termination Unit (LTU) with
16×E1/DS1 ports for PDH and an STM-1 port with
up to 63×E1 for SDH. The 16×E1/DS1 ports and
the STM-1 port with up to 63×E1s can all be used
simultaneously.
• Product Overview : HW
types and Description
ETU 1001
ETU 1001 is an Ethernet Termination Unit (ETU) that
supports up to four Ethernet ports.
ETU 1001 can be seen as a port extension to the
NPU, where basically the same Ethernet L2 and L3
functionality as on the NPU is supported on the
ETU.
• Product Overview : HW
types and Description
ETU 1002
ETU 1002 is an ETU that supports up to one 10G or
four 1G Ethernet ports.
ETU 1002 has four SFP cages supporting 4 x 1G
Ethernet, and one SFP+ cage supporting 10G
Ethernet.
• Product Overview : Power
Conditions and Thresolds
All plug-in units are equipped with temperature
sensors. Overheated boards that exceed limit
thresholds are put in out of service by the control
system. This is to avoid hardware failures in case of
over-temperature, for example, due to a fan
failure or an ambient temperature that is too high.
The plug-in unit is automatically returned to
normal operation when the temperature is below
the high threshold level.
• Product Overview : Power
Conditions and Thresolds
There are two thresholds:
• The high temperature threshold:
The NPU raises a temperature alarm (critical). The
NPU is still in full operation.
All plug-in units except NPUs raise a temperature
alarm (minor). The plug-in unit is still in full operation.
• The excessive temperature threshold:
The NPU shuts down the entire NPU (out of service).
All plug-in-units except NPUs raise a temperature
alarm (critical) and shut down the entire plug-in unit
(out of service).
• Product Overview : Power
Conditions and Thresolds
Input Voltage Behavior
• Product Overview :
Features and Functions
Features available –
Port-based VLAN (up to 1000 VLANs in the range of
1–4094).
MAC address table (32000 entries) with learning and
aging.
IPv4 and IPv6
Router Functionality
Multiple internal Layer 1 and Layer 2 Ethernet
connections.
MSTP/RSTP/LAG protection mechanism.
Ethernet loop detection.
Broadcast/multicast/destination lookup failure storm
protection.
• Product Overview :
Features and Functions
Features available –
In-band management transport in Ethernet flow
(DCN over VLAN).
Management/diagnostics.
• PM counters.
• Link OAM.
• Ethernet Service OAM.
• Port mirroring.
Frame Loss
Delay Measurement
Delay Variation measurement
• Product Overview :
Features and Functions
Features available –
Traffic Aware Power Save (TAPS)
TAPS (Traffic Aware Power Save) is a power saving
functionality available for all MINI-LINK 6600 products
when used with MINI-LINK 6363 or MINI-LINK 6365
radio units. It is aimed at keeping the system power
use as low as possible while still handling the actual
traffic rate. Tx and Rx power should be according to
ATPC.
Dual Carrier MMU(Two Single or Dual Carrier
Modems Configurations)
• Product Overview
THANK YOU
