Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Glass Filament Fabrics For Plastics Reinforcement: Product Specification

    Uploaded by

    quyet ngo
    This document specifies the properties of a glass filament fabric intended for reinforcing plastics. The fabric has a four shaft satin weave pattern with an area weight of 105 g/m2. It is made from EC5-11x2 yarn with 23.7 warp ends and 22.5 weft picks per cm. The fabric has high temperature and tensile strength resistance suitable for reinforcing plastics.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Glass Filament Fabrics For Plastics Reinforcement: Product Specification

    Uploaded by

    quyet ngo
    19 views2 pages
    This document specifies the properties of a glass filament fabric intended for reinforcing plastics. The fabric has a four shaft satin weave pattern with an area weight of 105 g/m2. It is made from EC5-11x2 yarn with 23.7 warp ends and 22.5 weft picks per cm. The fabric has high temperature and tensile strength resistance suitable for reinforcing plastics.

    Original Description:

    FK144

    Original Title

    FK144

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document specifies the properties of a glass filament fabric intended for reinforcing plastics. The fabric has a four shaft satin weave pattern with an area weight of 105 g/m2. It is made from EC5-11x2 yarn with 23.7 warp ends and 22.5 weft picks per cm. The fabric has high temperature and tensile strength resistance suitable for reinforcing plastics.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views2 pages

    Glass Filament Fabrics For Plastics Reinforcement: Product Specification

    Uploaded by

    quyet ngo
    This document specifies the properties of a glass filament fabric intended for reinforcing plastics. The fabric has a four shaft satin weave pattern with an area weight of 105 g/m2. It is made from EC5-11x2 yarn with 23.7 warp ends and 22.5 weft picks per cm. The fabric has high temperature and tensile strength resistance suitable for reinforcing plastics.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    GLASS FILAMENT FABRICS for PLASTICS REINFORCEMENT

    PRODUCT SPECIFICATION
    Specification

    Style Number 91111 MIL-Y-1140H


    US Style 120 III MIL-C-9084
    WLB No. 8.4544.60 DIN 65066
    British Standard S 13 / 11 BS 3396

    Finish/Designation FK144

    Unit Tolerance Specification

    Weave pattern four shaft satin DIN ISO 9354


    Area weight g / m² 105,0 ± 5% DIN EN 12127

    Yarn tex DIN EN 12654


    warp yarn EC5-11x2

    weft yarn EC5-11x2

    Fibre count 1 / cm DIN EN 1049


    warp ends 23,7 ± 5%
    weft picks 22,5 ± 5%

    Temperature resistance 1)
    Continuous load °C 260
    Short time resistance °C 600

    Moisture content % < 0,2 ± 1% DIN EN 3616


    Finish content % 0,08 - 0,28 ± 5% DIN ISO 1887
    DIN EN 60

    Thickness (approx. dry) mm 0,14 ± 5% DIN ISO 4603/E


    in laminate (43% Vol.) mm 0,10 ± 5%

    All statements herein are expressions of opinion which we believe to be accurate and reliable, but are presented without guarantee or responsibility on our
    part. Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent. No patent
    warranty of any kind, express or implied, is made or intended.
    INTERGLAS Technologies AG, Benzstraße 14, D-89155 Erbach, Telefon +49 (0)7305 / 955-416, Fax +49 (0)7305 / 955-512
    TS / 22.09.2008 Page 1 of 2
    GLASS FILAMENT FABRICS for PLASTICS REINFORCEMENT
    PRODUCT SPECIFICATION
    Unit Standard CS-ITG Tolerance Specification

    Style Number 91111 / FK144


    Tensile strength DIN EN 2747
    warp MPa 335 ± 10%
    weft MPa 320 ± 10%
    Young's-Modulus
    warp GPa 19 ± 10%
    weft GPa 18 ± 10%

    Compression strength DIN 53454


    warp MPa 355 ± 10% DIN 65380
    weft MPa 340 ± 10% DIN prEN 2580
    Compression-Modulus
    warp GPa ± 10%
    weft GPa ± 10%

    Interlaminar shear strength DIN EN 2377


    warp MPa 50 ± 10%
    weft MPa 45 ± 10%

    Flexural strength DIN EN 2746


    warp MPa 495 ± 10%
    weft MPa 460 ± 10%
    Flexural-Modulus
    warp GPa 24 ± 10%
    weft GPa 24 ± 10%

    Remarks
    1) Temperature resistance for dry fabrics

    All statements herein are expressions of opinion which we believe to be accurate and reliable, but are presented without guarantee or responsibility on our
    part. Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent. No patent
    warranty of any kind, express or implied, is made or intended.
    INTERGLAS Technologies AG, Benzstraße 14, D-89155 Erbach, Telefon +49 (0)7305 / 955-416, Fax +49 (0)7305 / 955-512
    TS / 22.09.2008 Page 2 of 2

    You might also like