Triumph Herald

A L L T H E P A R T S Y O U N E E D
T R I U M P H
9 4 8 , 12 0 0 , 12 / 5 0 & 13 / 6 0
PARTS & ACCESSORIES CATALOGUE
EDITION 2.1
SOURCE CODE HCM7
THE
RIMMER Conceived at Standard-Triumph in 1956, the Herald was launched 3 years
later with a design by Giovanni Michelotti. Although it was competing in the
small-car market with cars like the Mini and Anglia, it achieved reasonable
BROS success, with over half a million cars built during just over a decade.
Press comment was favourable on launch day. In any event, the car’s problems were smaller
The car’s advantages were its economy, its than those of the company, which fell badly into the
SERVICE separate chassis, ease of maintenance, and its

remarkable turning circle (designed to match a
London taxi).
red during 1960, more the fault of the market than
the product. The outcome was the acceptance of a
bid from Leyland in 1961, which actually took the
On the debit side, the car was costing more than Herald into the same stable as the Mini with which
its target price, it acquired an instant reputation for it was competing!
poor finish, and it was definitely underpowered. Around the same time came the new Herald
The original engine was a 948cc 4-cylinder unit. 1200, with its 1147cc engine at the head of a list of
WE HAVE THE Other features of the car included independent front
suspension, rack and pinion steering, adjustable/
mechanical changes. Externally the car remained
virtually identical. There was an Estate and a re-
telescoping steering column, and independent rear styled Coupe in 1961, although the Coupe ceased
PARTS suspension with swing axle transverse leaf and production in 1964.
spring layout. The 1200 Saloon was to be made until 1970. In
- First out, in April 1959, came the Saloon and the
Coupe, to be joined later in the year by the Twin
1967 it was joined by the 13/60, which had a 1296cc
engine and was easily distinguishable by the V-
WE GUARANTEE Carb Saloon and the Convertible. Soon there was an
attempt to overcome the pricing problem by
shaped front it borrowed from the Vitesse.
When the production line ceased rolling in 1971,
introducing an ultrabasic Herald ‘S’, but this was 13/60 Convertibles and Estates were the last
THE QUALITY short-lived. models to come from it.
- HELPING YOU CARE FOR YOUR HERALD

The Triumph Herald is an ideal car for an But, for a car where even the later models
WE’RE KEEN ON enthusiast to maintain. With its separate chassis,
its simple system of bolt-on components, and the
ceased production in 1971, far less easy is to
continue to find good quality parts. and this is
PRICE front-end access afforded by the forward hinging
bonnet, it is easy to care for.
where Rimmer Bros come into our own.
- BRITISH MOTOR HERITAGE

WE DELIVER Heritage Approval means that Rimmer
Bros meet strict criteria regarding quality
Customer Benefits
The quality of service
FAST of service, product knowledge, financial
stability, premises and that they carry a
you receive is of the highest order and you
know you are dealing with the best
broad range of Heritage Original companies in the classic sector.
- Equipment parts in stock. British Motor Heritage product
Only the premier companies in the is produced to the highest standards,
WE KNOW YOUR classic sector are approved to display the
accreditation sign. Rimmer Bros have been Heritage
mostly from the original tooling and to the original
specification. All of the product is identified by the
CAR approved for Triumph & Rover SD1 since 1987. distinctive product label.
THE CARS WE SPECIALISE IN

- As well as caring for your Herald, we also Additionally, we also supply parts for MG Rover
concentrate on Vitesse, TR2, TR3, TR4, TR5, TR6, cars - Rover 100/200/400/600/800/25/45/75/ZT &
TR7/8, Stag, Spitfire, GT6, 2000/2500/2.5Pi, Dolomite, MGF.
Rover SD1, Range Rover, Discovery, Freelander, Please refer to inside rear cover for details on
Defender, 90/100 & Land Rover ‘Series’ vehicles. all our catalogues.
UK . WORLDWIDE . THE
1
SO WHERE DO WE GET OUR PARTS
Wherever possible we supply original stock
from BL/Rover sources - lots of parts are still
manufactured. Where this fails, we sometimes have
parts re-manufactured. We have Heritage approval
to do this, because we have satisfied them as to our
quality control standards, and we use original
tooling and factory drawings where these are
available. Where original parts are unavailable and
the cost of re-manufacture is prohibitive, we may
supply a suitable alternative or in certain cases offer
a used (non safety critical) part.
THE PEOPLE YOU’RE DEALING WITH
This company really is owned by two brothers
named Rimmer. Bill and Graham started their
business from humble beginnings in the early
COMMITMENT
1980s, and it has grown to be one of the leading
organisations of its kind in the world, supplying
TO CUSTOMER
parts Worldwide to an ever growing list of
customers.
Both Bill and Graham still work full-time in the
SERVICE
business, helped now by over 60 members of staff.
The main qualification of membership of our
Helpful - Accurate -
staff is a recognition that our customers, and our
company reputation, depend on our ability to get
Fast - Efficient
every aspect of our service right first time. The overall objective at Rimmer Bros is to
achieve customer satisfaction at all times.
THE STOCK WE NEED TO GIVE THE Our people know your car well, and every member of our
SERVICE YOU NEED
staff is dedicated in helping to preserve Classic Cars.
Our degree of specialisation means two things.
Our computer system gives up-to-the minute information
Firstly, our people know the cars we’re dealing
regarding availability and the price of any item.
with inside and out, and can give you any advice
you might need regarding part selection. We have an enviable reputation for despatching goods
Secondly, we are able to stock in depth just when the customer needs it, quickly and efficiently.
about any part you might need. Triumph House is
our latest HQ, acquired in 1991. With over 75,000 We try to make all our systems and documentation easy
square feet of warehousing alone, it is a cavernous to follow and use, and make sure that our catalogues and
building, and it needs to be! It currently contains price guides really do help our customers choose the
more than 350,000 recorded part numbers with right parts easily, first time.
over 30,000 stock lines, and we hold as many of
each as necessary to make it almost impossible to
run out of stock. TRADE MARKS & LOGOS: The ‘Triumph’ and ‘Heritage’ logos used herein are registered Trade Marks of British Motor
All other aspects of our operation receive equal Heritage Ltd, and are used with their license under the special ‘Heritage’ approval scheme.
emphasis. A truly efficient mail order and stock
ILLUSTRATIONS: The factory line drawings of parts are also reproduced under license from British Motor Heritage Ltd.
control system. The latest racking and storage
© Copyright Rimmer Bros. All rights reserved. No part of this publication may be copied, reproduced, stored in any
facilities for fast and accurate “order picking”.
retrieval system, communicated or transmitted in any form or by any means, including Photocopying, Electronic,
Careful packaging and despatch procedures. Mechanical or otherwise, without prior written permission from Rimmer Bros Ltd.
TRIUMPH PARTS SPECIALIST

2
TELEPHONE
THIS CATALOGUE & OUR PRICE GUIDE
01522 There are no prices in this catalogue. Use it to select the parts you need, then check their cost
by referring to our web site or the separate Price Guide (or CD rom) which represents the other half
of our ordering system. The price guide is updated and reprinted more frequently, but we ask that
568000
you confirm all prices when ordering. It may also list additional parts (new lines) that we have
introduced since this catalogue was printed, and it has more detailed information about ordering &
delivery methods. It also has information on warranties and a ‘Trouble Shooter Guide’.
(Overseas +44 1522 568000) ORDERING BY PHONE

Please quote your home postcode and part numbers where possible. This gives instant access
FAX to our computerised records and stock control system. If you have any difficulty in selecting the
parts you need, our expert staff can help.
01522 567600
(Overseas +44 1522 567600)
E-MAIL
[email protected]
WEBSITE
UK Payment for Phone Orders
www.rimmerbros.co.uk (See also “Overseas Orders & Payment.”)
When you have checked on price, availability and delivery costs you can place your order by
phone using Visa, MasterCard, Delta/Connect, Maestro, Solo, American Express, Diners Club, or JCB.
ADDRESS You will need to tell us the card number, expiry date (or issue number), cardholder’s full name and
registered card address.
Rimmer Bros, Triumph House,
After Hours Ordering Service
Sleaford Road, Bracebridge Heath, We operate a 24-hour answering/ordering service which is available to card holders out of
Lincoln, LN4 2NA, England. normal hours for both UK and Overseas customers. Just leave all necessary details on our telephone
voice mails, ie your vehicle type, year, model, the parts and/or the part numbers you require, plus
your name, address (inc, postcode), credit card details and delivery address (if different).
Writing out these details before phoning usually helps a caller to give us clear instructions. If at
all possible, please also leave a daytime telephone number.
ORDERING BY E-MAIL
AND THE INTERNET ORDERING BY POST
For Internet surfers our web site holds details on Triumph House, Sleaford Road, Bracebridge Heath, Lincoln, LN4 2NA, England.
all our parts catalogues and has an on line
ordering facility. Use our E-Mail address for We ask you to phone first if at all possible - to check your parts selection, and to advise of
sending your order or parts enquiry. State if you delivery charges. Because prices and availability sometimes change, we can also confirm the exact
require us to confirm prices, as they can remittance needed, avoiding unnecessary delays. If you have not been able to telephone, please
sometimes alter at short notice. give us all possible information - car type/year, RH or LH, front/rear etc - so we can check your
selection (including your name, address and postcode) in all correspondence.
Use our Order Form if you can. It asks specifically for all the details we might need. Please
www.rimmerbros.co.uk photostat or request additional copies of the order form if required.
UK Payment for Post Orders (See also “Overseas Orders & Payment.”)
E-Mail: [email protected] Send your remittance with the order. The ‘Pricing’ section in the Price Guide tells you how to
calculate the amount.
We accept payment by personal cheque even if the cheque guarantee card limit is exceeded. All
we require is your full name and address on the back of the cheque along with your cheque card
number and for business cheques, a relevant letterhead. Cheques or P.O.s made out “Rimmer Bros
Ltd” please.
Note, if you are unsure as to the exact amount to send, you can write across the top of your cheque,
“Cheque Value Not To Exceed £...”. You can post us your credit card details if you prefer. If you send
cash, note that we cannot accept responsibility for any loss, so registered mail is essential. Bank
drafts and Building Society cheques are also accepted. For Bank Transfer information see Price Guide.
ORDERING BY FAX
UK CUSTOMERS: 01522 567600 OVERSEAS CUSTOMERS: +44 1522 567600
Order through our website using our See also “Overseas Orders & Payment.”
secure on-line ordering system! Another facility for customers who wish to make enquiries, or order by credit, debit or charge
card. Again, we will need your name, address (inc. postcode), credit card details and delivery
All the latest news, special offers, products and address (if different). Plus fullest possible car/parts details - as for orders by post.
prices just a ‘click’ away.
3
CONTENTS
CATALOGUE CONTENTS
VEHICLE PRODUCTION SUMMARY Page 6
LOCATION OF SERIAL/VIN NUMBERS Page 6
QUICKFINDER (Popular Parts) Page 7
ENGINE Page 9
CLUTCH Page 15
COLLECTING IN PERSON
ENGINE & GEARBOX MOUNTINGS Page 16
If you wish to ‘call and collect’, you will always be made welcome at our shop and sales counter
COOLING & HEATING Page 17
during business hours. Our Visitor Information Centre has lots of interesting details of each production
model and the factories where they were produced. FUEL SYSTEM Page 18
Customers drive here regularly from all over Europe. Lincoln is a historic Cathedral city and is an EXHAUST SYSTEM Page 20
excellent place to visit. We’re about 2 miles south of Lincoln on the A15 Lincoln to Sleaford road (see GEARBOX Page 22
map on back cover). We advise you to pre-check by phone that we have the part/s you want in stock.
PROPSHAFT Page 25
We accept payment by credit card, cash, bank draft, travellers cheque, building society cheque,
and personal cheque (when presented with a cheque card) even if the cheque card limit is exceeded, DIFFERENTIAL & DRIVE SHAFTS Page 25
and by business cheque with accompanying letterhead. SUSPENSION - FRONT Page 26
SUSPENSION KITS Page 29
PRICING
SUSPENSION - REAR Page 31
For full information and details on prices, VAT, & VAT exempt export sales, please refer to our ROAD WHEELS Page 32
web site or the latest Price Guide. Written quotations are available on request, for parts and/or
BRAKE SYSTEM Page 33
delivery charges. Please confirm all prices when ordering - prices and availability can sometimes
change at short notice. Please note that our latest prices can be found on our web site. STEERING Page 38
ELECTRICAL Page 40
OVERSEAS ORDERS & PAYMENT
CHASSIS Page 44
We supply parts to car owners Worldwide. We BODY PANELS & FITTINGS Page 45
have thousands of customers in Europe and regularly WE EXPORT TO THE BODY FITTINGS Page 50
send parts as far afield as Australia, North America,
INTERIOR TRIM Page 52
Africa and the Far East. Delivery costs of course, vary
greatly (depending on size/weight/ urgency). We can HOOD & FRAME Page 59
quote accurately for the cost of parts and delivery once ACCESSORIES Page 60
your requirements are known. EC & WORLDWIDE HARDWARE/FASTENERS Page 78
Our Multi-language European Order Forms explain
PAINT Page 78
how to order parts in English, Italian, German, Spanish
and French.
TEL: +44 1522 568000 INDEX Page 81
FAX: +44 1522 567600
Payment By Export Customers: E-MAIL: [email protected]
There is a choice of payment methods for customers overseas;
NEW & RECONDITIONED PARTS
A) Credit card, Debit card or Charge card.
Almost every part we list is sold brand-new, but in many
B) Bank cheque - in ££s sterling (Drawn on a London Bank) instances we also offer you the facility to buy “Reconditioned”
C) Travellers Cheques (signed) - in ££s sterling. (usually giving us your old component in part-exchange).
Where there is a reconditioned version of a part, you will
D) Giro Cheques in ££s sterling. find the letter ‘R’ added at the end of the part number.
E) By Bank Transfer - see Price Guide.
EXCHANGE SURCHARGES (REFUNDABLE)
PLEASE NOTE THAT ALL TRANSACTIONS MUST BE IN ££s STERLING.
Where parts are sold on an exchange basis, an “Exchange
Surcharge” is applied – a deposit in effect, which is refunded
CHOICE OF DELIVERY METHODS to you when your old unit is received by us. This system allows
you to make an exchange without having to send the old unit
(For Further Information/Cost Details, Please Refer to Price Guide) first ... it can often prevent your vehicle being off the road. The
amount of the Exchange Surcharge is shown in the Price Guide
UNITED KINGDOM in italics below the part number.
There are numerous delivery options for the UK mainland ranging from Post to overnight carrier Before returning your old unit, please telephone our
services. We can advise of the best method of despatch when you telephone. The type of service that customer service dept on 01522 568000 in order to obtain a
return authorisation number. See reverse of invoice for full
we recommend depends upon the size, weight and urgency of the parts you require. details of return procedure. Units must be drained of oil, water
Our price guide indicates the approximate costs, and we will confirm the final invoice total at the and be serviceable; we reserve the right to retain all or part of
the surcharge if the unit is irreparable, damaged, incomplete or
end of the call if required. not identical to the type supplied.
WORLDWIDE (NON EC COUNTRIES) SELECTED USED PARTS
We started exporting parts Worldwide in 1982, and since then we have gained an excellent
We are often asked for parts that are no longer available,
reputation for our speed & efficiency of service. where the cost of re-tooling or re-manufacturing is prohibitive,
Delivery costs are based on size, weight, and method of delivery. We have discounted rates with and there is little or no chance of the part becoming available.
well known carriers, so costs are kept to a minimum. Send us a list of the parts you need (using post, We have also found that some customers prefer the option of
being able to buy a (non safety critical) used alternative, where
phone, fax or E-Mail), tell us quantities and urgency, and we will work out the best delivery method perhaps the cost of a new part is unjustified.
and quickly advise you of the cost. Over the years, we have acquired many parts which are
Written quotations are available on request. suitable for re-sale. You will find these parts listed in the Price
Guide under the same part number reference as new but with a
‘U’ suffix. All used parts have been cleaned and inspected and
EC COUNTRIES are sold as serviceable when fitted.
The European Community Single Market permits the free movement of goods between all EC
countries. This allows us to provide a superb service to all our customers within the EC, with the “Errors & Omissions Excepted. All parts offered subject to availability.
All part numbers, illustrations and photographs used in this catalogue are intended for
benefits of improved delivery - via lower charges and easier documentation. Deliveries can be easily reference/identification purposes only, and are not necessarily an exact representation of the
arranged using air or surface transport. Our Price Guide indicates approximate costs. goods supplied. Whilst we make every effort to ensure the accuracy of product descriptions in
this catalogue, they are based upon information supplied by the manufacturer/distributor at
the time of publication. There may be occasions - due to circumstances beyond our control -
when specifications are changed, or when goods become temporarily unavailable.”
Certain part numbers have been superseded to an alternative number when a later version or
updated specification is offered.
4
If the styling had been left to Triumphs own internal stylists, we would
never have had the benefit of the stylish bodywork that graces the Herald.
In fact when project Zobo was initiated in 1956 the in house initial designs
were dumpy to say the least. Some people even went as far to say that it
resembled a mechanical bathtub on wheels. It needed a styling miracle,
It was 1956 when work first started on project Zobo which later and that miracle came along in the spring of 1957 when the Standard-
became the Herald we all know, love and drive today. However if the Triumph management team were introduced to Giovanni Michelotti.
chairman of BMC Sir Leonard Lord had not had a disagreement with the Michelotti delivered the prototype on Christmas Eve 1957. Apart from
MD of Standard-Triumph Alick Dick, then Zobo may have turned into a a few details like bonnet latches, tail lamps, grille and badging, what he
completely different car. Standard -Triumph had hoped to renew a long delivered was identical to how the coupé version of the Herald looks today.
term contract with a subsidiary of BMC for building bodies of the yet to be The Zobo prototype X608 and other pre production prototypes were put
announced new model. However due to the rebuff and a lack of capacity at through a variety of testing including a trip to Tangier.
the other body building company Pressed Steel Co, a major rethink was The Herald was launched in 1959 at the Albert Hall by Bob
required. Standard-Triumph did not want to be beholden to outside Monkhouse. The coupé and saloon models were displayed and, as a
contractors for monocoques and a lack of in house pressing capacity, the unique piece of theatrical display, a team of mechanics built up a car from
decision was made to go down the separate chassis route. Although at the sub assemblies in four minutes, after which it was started and driven away.
time it was seen as a retrograde step compared to the monocoque
At the launch the coupé cost £731 and the less powerful saloon came
construction now being used by all the other major manufacturers, it did
in at £702 including purchase tax. Sales were initially good with a high
however offer several advantages.
level of interest from the motoring press. Unfortunately the Herald was
Firstly it enabled Triumph to manufacture the body panels in smaller more expensive than the competition (a Ford Anglia 105E was £92 less
sections and thus gave a greater choice of smaller scale suppliers. It and you could buy a Morgan 4/4 for the same price as the Herald). With
obviated the need for assembly jigs, and finally, and probably most the financial problems of the time, it was not good news. Normally Triumph
importantly, it enabled various body styles to be easily produced with the reacted to falling sales by dropping prices, however instead as they had
minimum of modification. just been taken over by British Leyland, they launched a stripped out
version called the Herald S which was sold at £664.
From this start a whole range of models were produced; 948, S,
1200, Courier van,12/50 & 13/60 in a variety of body styles. (Coupé,
saloon, convertible and estate). A total of 521902 cars were sold. Together
with all the models based on this original chassis design, the Vitesse,
Spitfire, GT6 and Bond ranges gave a total just short of a million cars.
5
VEHICLE PRODUCTION & SPECIFICATION SUMMARY
MODEL PRODUCTION DATES TOTAL BUILT COMMISSION NUMBERS
948 & Herald S March 1959 to June 1961 76860 G1 to G66994
(Jan 1964 for Herald S) (G73751SP for Herald S)
948 Twin carb September 1959 to March 1961 11392 GY1 to GY11392
948 Coupé February 1959 to June 1961 15157 Y1 to Y23428
948 Convertible March 1960 to June 1961 8262 Y5632CV to Y23428CV
1200 Saloon February 1961 to December 1970 201142 GA1DL to GA249873DL
1200 Coupé February 1961 to October 1964 5319 GA609CP to GA162103CP
Courier Van February 1962 to October 1964 5136 GA44651V to GA163205V
1200 Convertible February 1961 to September 1967 43295 GA266CV to GA234868CV
1200 Estate March 1961 to September 1967 39819 GA4414SC to GA234990SC
12/50 Saloon December 1962 to September 1967 53267 GD1RS to GD55689RS
13/60 Saloon August 1967 to December 1970 40433 GE1DL to GE78335DL
13/60 Convertible August 1967 to September 1971 15467 GE5CV to GE83432CV
13/60 Estate August 1967 to September 1971 11172 GE4SC to GE83433SC
MODEL SUFFIX LETTERS YOUR VEHICLE DETAILS

MODEL TYPE SUFFIX LETTERS ENTER YOUR VEHICLE DETAILS HERE FOR EASY REFERENCE
Saloon DL
Coupe CP
Convertible CV Model
Sun Roof (Factory) RS

Year of Manufacture
Left Hand Drive L
VIN/Chassis Number
CAPACITIES
FUEL Engine Type
1200 Saloon and Convertible 61/2 Gallons (30 litres)
948 all models and S 7 Gallons (32 litres) Engine Number
All estate models* 9 Gallons (41 litres)
*Some late 13/60 models had the larger Vitesse tank fitted (8 3/4 Gallons) Gearbox Type
OIL
Engine 7 Pints (4 litres) Paint Code
Gearbox 11/2 Pints (0.9 litre)
Rear Axle 1 Pint (0.6 litre) Trim Code
Cooling 11 pints (6.25 litres)
ENGINE & COMMISSION NUMBERS

These illustrations show where to locate the Engine number
and the Body Commission number on the Triumph Herald.
COMMISSION
NUMBER
This number is stamped
on a plate attached to
the L.H. side of the
scuttle.
ENGINE
SERIAL
NUMBER
6
DESCRIPTION QTY REQ. PART No. DESCRIPTION QTY REQ. PART No. DESCRIPTION QTY REQ. PART No.
QUICK FINDER
QUICK FINDER
This section will help you
quickly find the parts which
are most frequently called for.
Each part is then listed again
under its appropriate section
later in the catalogue.
Service Items
Oil Filter Element;
948 only
All other models
(1)
(1)
GFE107
GFE119
Engine Gaskets Oil Seals
Adaptor for 948 (1) 12G2518 Head Gasket Set; Crankshaft Oil Seal;
Use to adapt GFE119 if GFE107 is unavailable. 948 (1) RH5351 Front (Timing cover)
Air Filter Element; 1200, 12/50 (1) GEG117 All except GK Engine 13/60 (1) 100499
948 (1) GFE1009 13/60 (1) AJM1149 Late GK Engine 13/60 (1) UKC1110
All others (1) GFE1015 Head Gasket only; Rear (Main) non scroll type (1) 143456
Oil Pressure Switch (1) GPS117 948 (1) GEG344 Gearbox Oil Seals;
Distributor Cap; 1200, 12/50 (1) AJM314 Front Cover (bellhousing scroll type) (1) 122566
Side entry (1) GDC114 13/60 (1) AJM374 Rear Output All except 13/60 (1) 88G564
Top entry (1) GDC103 Rocker Cover Gasket (1) AJM414 13/60 (1) 117511
Rotor Arm (1) GRA101 Exhaust/Inlet Manifold Gasket; Differential Oil Seals;
Condenser (1) GSC111 948, 1200, 12/50 (1) GEG615 Pinion (front) (1) 109054
Contact Breaker Points (1) GCS101 13/60 (1) AJM648 Output (side) (2) 117952
Spark Plugs; Gasket Manifold to Down Pipe; Front Hub Seal (2) GHS110
948,1200,12/50 Standard (4) GSP4366 948 (1) GEG716 Rear Hub Seal;
948,1200,12/50 Double Core (4) GSP4366HP 1200 Single Carb 1962 to 1967 (1) GEG717 Outer (2) GHS111
13/60 1200 Single Carb 1967 to 1970 (1) GEG702 Inner (2) 128978
Standard (4) GSP4362 1200 Twin Carb 1967 to 1970 (1) GEG702
Double Core (4) GSP6462 12/50 (1) GEG702
Plug Lead Set;
Std Side entry (1) RH5096
13/60
Timing Cover Gasket
(1) GEG701
(1) 211126
Mountings Bushes
Std Top Entry (1) GHT146 Front Engine Plate to Block Gasket; Engine Mounting (Rubber);
Silicone Top Entry (1) GHT146S 948, 1200, 12/50 (1) 205457 948, 1200 (fitted up to GA80000E) (2) 104526
Ignition Coil; 13/60 (1) 215350 Late 1200, 12/50, 13/60 (2) UKC5334
Standard (1) GCL110 Sump Gasket Set; Gearbox Mounting (Rubber) (2) 122689
Hi Performance (1) GCL110HP Inc Seals, not GK Engines (1) GEG216K Differential Mounting Bushes;
Must not be used with Luminition Electronic ignition.
Fan Belt; Inc Seals GK Engines (1) AJM279K Rear
948,1200,12/50 (1) GCB11038 Less Seals not GK Engines (1) GEG216 Standard (2) 117578
13/60 (1) GCB11025 Less Seals GK Engines (1) AJM279 Polyurethane (2)117578POLY
Wiper Blade (2) GWB112 Sump Gasket Only (1) AJM517 Front - Upper
Fuel Filter (Inline) (1) GFE7004 Water Pump Gaskets; Standard (2) 133568
Water Pump to Housing (1) 138701 Polyurethane (2)133568POLY
Housing to Cylinder Head (1) 138702 Front - Lower
Thermostat Gasket (1) GTG103 Standard (2) 131796
ENGINE SERVICE KIT Fuel Pump to Block Gasket (1) 138591 Polyurethane (2)131796POLY
Core Plug Set;
For engine block & cylinder head.
948, 1200 dished type (1) RH5041
All others bucket type (1) RH5045
Engine Service Kits

Engine Service Kit;
Inc, plugs, points, condenser, air filter, oil filter & fan belt.
948 (1) RH5350
1200, 12/50 (1) RH5078
13/60 (1) RH5104
7 ORDER ON: 01522 568000 / www.rimmerbros.co.uk

QUICK FINDER
engine car pic
Front Suspension Kits Rubber Seals

Please refer to FRONT SUSPENSION for detailed listings. Windscreen Rubber (1) 805856
Clutch Kit (includes OE spec cover plate & bearing);
Anti Roll Bar Mounting Bushes; 61/4" Coil Spring (1) RH5009 Windscreen Frame to
Standard (2) 123998 See application notes in clutch section. Roof Seal (Saloon) (1) 703696
Polyurethane (2) 123998PS 61/2" Diaphragm (1) GCK272 Rear Roof to Deck Seal (Saloon) (1) 611750
See application notes in clutch section. Hood Header Rail Seal (Convertible) (1) 609366
Upper Wishbone Bush; Hose Kit (includes all radiator/heater hoses & clips);
Standard (4) 119451 Hood Sides (pair) (2) 609340
1200 (1) RH5281 Rear Side Glass Seals (pair);
Polyurethane (4) 119451POLY 12/50 (1) RH5282 Saloon (1) 805762-3
Upper Suspension Overhaul Kit; 13/60 (1) RH5283 Estate (1) 704786-7
Standard (2) RH5080 Front Hub Bearing Kit (per hub) (2) RH5027 1/4 Light Seals (pair) (1) 803558-9
Polyurethane (2) RH5080POLY Rear Hub Bearing Kit (per hub) (2) GHK1022 ‘A’ Post Seal (2) 630755
Lower Inner Suspension Overhaul Kit; Brake Kits (Front) Door Waist Seal Outer (2) 608278
Standard (2) RG1193 Please refer to “Brake System” for details on all brake kits Door Waist Seal Inner (2) 608288
Polyurethane (2) RG1193POLY Disc & Pad Set (2 discs & pads); Bonnet Seal (to bulkhead) (1) 609272
Trunnion Bush Kit Front (2) 514191 Standard Discs & Pads (1) RL1525 Boot Lid Seal (1) YKC68
Trunnion Bush Kit Rear (1) 514370 Type 12 calipers.
Door Aperture Seal;
Front Shock Absorber Bush; Uprated Discs & Pads (1) RL1525UR Available in black, blue, red, tan, chestnut, beige.
Upper Type 12 calipers EBC Discs and pads. Saloon (2) RX3004
Standard (4) 517985 Uprated Discs & Pads (1) RL1525ROS Convertibles (2) RX3005
Type 12 calipers ROSSINI Discs and pads.
Polyurethane (4) 517985POLY Rear Screen Sealing Rubber;
Standard Discs & Pads (1) RL1080 Saloon (1) 803357
Lower Type 14 calipers.
Standard (2) 119450 Uprated Discs & Pads (1) RL1080UR Coupe (1) 902754
Polyurethane (2) 119450POLY Type 14 calipers EBC Discs and pads. Estate/Courier (1) 804288
Uprated Discs & Pads (1) RL1080ROS
Type 14 calipers ROSSINI Discs and pads.
Rear Suspension
Rear Spring Bush; Cables
Standard (2) C8939A
Accelerator Cable;
Polyurethane (2) C8939APOLY
984, 1200, 12/50 (1) 152677
Radius Arm Bush;
13/60 (1) 148679
Standard (4) 119451
Choke Cable;
Polyurethane (4) 119451POLY
984, 1200, 12/50 (1) 401458
Shock Absorber Bush;
13/60 (1) 402694
Standard (each) (8) 102987
Handbrake Cable;
Polyurethane (pair) (4) 102987P
Short Cable (1) 121766
Handbrake to relay lever.
Main Cable (1) 127311
Compensator to wheel cylinder.
Speedometer Cable (1) GSD111
ORDER ON: 01522 568000 / www.rimmerbros.co.uk 8

ENGINE & HEAD REBUILD KITS
ENGINE & HEAD REBUILD KITS
Full Engine Rebuild Kit

This kit contains everything you need to recondition
your full engine. We assume you will have the
block re-bored and any other machining done as
required. Short Engine Rebuild Kit Cylinder Head Rebuild Kit
IMPORTANT - Pistons are supplied +0.020" oversize.
Bearing sets are supplied in standard size. Please This kit contains everything you need to This kit contains everything you need to
advise specific sizes required at time of ordering. recondition your short engine. We assume you recondition your cylinder head.
Kit contains:- will have the block re-bored and any other Kit contains:-
Piston set +0.020" oversize (inc rings/pins) machining done as required. Inlet valves
(state size required) IMPORTANT - Pistons are supplied +0.020" Exhaust valves
Main & big end bearing shells (state size required) oversize. Bearing sets are supplied in standard Valve springs
Thrust washers (state size required) size. Please advise specific sizes required at time Valve guides
Inlet valves of ordering. Head gasket set
Exhaust valves Kit contains:-
Valve springs Piston set +0.020" oversize (inc rings/pins) Additionally why not add some or all of the
Valve guides (state size required) following options to the rebuild kit
Tappets Main & big end bearing shells (state size required) Rocker shaft
Timing chain Thrust washers (state size required) Rocker arms
Timing chain tensioner Tappets
Crankshaft sprocket Timing chain
Oil pump Timing chain tensioner
Oil pressure relief valve Oil pump
Oil pressure relief valve spring Oil pressure relief valve
Oil pressure switch Oil pressure relief valve spring
Head gasket set Oil pressure switch
Sump gasket set (inc oil seals) Head gasket set
Oil filter Sump gasket set (inc oil seals)
Additionally why not add some or all of the Oil filter
following options to the rebuild kit; Additionally why not add some or all of the
Crankshaft following options to the rebuild kit;
Camshaft Crankshaft
Rocker shaft Camshaft
Rocker arms Crankshaft sprocket
Camshaft sprocket Camshaft sprocket
Con rods Con rods
In addition to the rebuild kits, the engine section In addition to the rebuild kits, the engine section
of this catalogue lists all the other parts that you of this catalogue lists all the other parts that you
might want to buy additionally, such as engine might want to buy additionally, such as engine
studs, cylinder head nuts, water pump etc. studs, cylinder head nuts, water pump etc.
FULL ENGINE REBUILD KIT SHORT ENGINE REBUILD KIT CYLINDER HEAD REBUILD KIT
1200 (Early 39 Bhp) RH5015R BK 1200 (Early 39 Bhp) RH5028R BK 1200 early (Early 39 Bhp) RH5184R BK
Up to GA80000E. Up to GA80000E. Up to GA80000E.
1200 late (Late 48 Bhp) RH5024R BK 1200 (Late 48 Bhp) RH5010R BK 1200 late (Late 48 Bhp) RH5017R BK
Engine prefix GA & GD. Engine prefix GA & GD. Engine prefix GA & GD.
12/50 (51 Bhp) RH5040R BK 12/50 (51 Bhp) RH5036R BK 12/50 (51 Bhp) RH5051R BK
Engines from GD1 to GD103470. Engines from GD1 to GD103470. Engines from GD1 to GD103470.
13/60 (61 Bhp) RH5020R BK 13/60 (61 Bhp) RH5005R BK 13/60 (61 Bhp) RH5217R BK
Prefix GE. Prefix GE. Prefix GE.
13/60 (61 Bhp) RH5032R BK 13/60 GK (61 Bhp) RH5038R BK 13/60 (61 Bhp) RH5174R BK
Prefix GK. Prefix GK. Prefix GK.

ENGINE COMPONENTS
Cylinder Block CYLINDER LINER
CYLINDER BLOCK
Components PLEASE REFER
TO LISTINGS
COMPONENTS
CYLINDER HEAD STUDS
Front Engine Plate (1) 215372 (105121)
Gasket – Engine Plate to Block; WF511A PLEASE REFER TO LISTINGS
129077
948, 1200, 12/50 (1) 205457
13/60 (1) 215350
Bolt - Plate to Block (3) GHF120
Washer - Plate to Block (3) GHF332 DP619
Rear Engine Plate (1) 201344 112907 (3)
Stud-Rear Engine Plate (3) 112907
Cylinder Liner;
*CORE PLUGS
PLEASE REFER
* DP619
948 (4) 108955
1200, 12/50 (4) 132468
TO LISTINGS
*
13/60 (4) 158940 131786
Cam Bearing Set (1) RL1495 118632
Cylinder block (where fitted).
Cylinder Head Stud; 500469 (4)
All Except 13/60 (9) 105121 100433 (1) 101022 (4)
13/60 (8) 105121 TE605141 (1)
Stud Lifting Eye Bracket (2) 121217
Nut (Cylinder head stud) (10) 110748 *
Washer - Plain (10) WP9
Bolt - Main Bearing Cap; 100433 (2)
Standard (6) BH607241
Uprated (6)BH607241X
Washer – Locking (for BH607241) (6) WL600071 DP514
Front Sealing Block (1) 151134
36234 118632 TE605141 (2)
Filler (2) 36234
Sealing block to cylinder block. UKC8321
Screw (2) SW605081 132107
Sealing block to cylinder block.
GHF120 (3) 131535
Gasket (2) UKC8321
Sealing block to cylinder block. 131535UR
GHF332 (3)
Oil Pressure Switch (1) GPS117 36234 6K433 116516
Oil Pressure Relief Valve (piston) (1) 132107 SW605081 (2)
107246
Spring – Oil Pressure Relief Valve;
Standard (1) 131535 GPS117
151134 NSS
Uprated (1) 131535UR
Washer – Oil Pressure Valve (1) 6K433 WL600071 (6)
Housing – Oil Pressure Valve (1) 107246 BH607241 (6)
Set Screw – Oil Gallery (1) SH605041
Washer Copper (1) 500469
Plug – Oil Gallery (2) 118632
Engine Lifting Eye; Core Plugs – Dished Type;
Oil Seal – Crankshaft;
Front Core Plug Set 948, 1200 (1) RH5041
Front (all except GK engine 13/60) (1) 100499 For block & cylinder head.
948, 1200, 12/50 (1) 121216
Front (GK engine 13/60) (1) UKC1110 Core Plug - Cam Rear (1) 148353
13/60 (1) 142649
Rear Crankshaft Oil Seal Rear (1) 121215 Core Plug in Head (1) 27378
Non Scroll Type (1) 143456 Core Plug R/Camshaft (1) 44473
Drain Plug (cylinder block) (1) 129077
Housing – Rear Main Oil Seal; Core Plug 1" DIA. (1) 46172
Washer - Fibre (for drain plug) (1) WF511A
948 and early 1200 to GA206640E Core Plug - Cam Front (4) 46549
& GD1E to GD80058E) (1) 137374 Stud - Fuel Pump to Block (2) 100433
Core Plug (4) 56712
Late 1200, 12/50 &13/60 (1) 156530 Gasket - Fuel Pump to Block (1) 138791
Core Plugs – Bucket Type;
Gasket – Seal Housing (To block) (1) 105321 Core Plug Set (all excl. 948 & 1200) (1) RH5045
Bush – Core Plug Set (for block & cylinder head) For block & cylinder head.
Oil Pump/Distributor Drive (1) 131786 948, 1200 (dished type) (1) RH5041 Core Plug (1) 144648
Stud (distributor pedestal to block) (2) TE605105 All others (bucket type) (1) RH5045 Core Plug 1 1/4” (3) 144686
Dowel (Timing cover to block) (2) DP514 Core Plug 1" (1) 144687
Core Plug 1-1/2" (5) 144688
Core Plug - Cam Rear (1) 148353
ROCKER GEAR
OIL FEED KIT
A remote mounted kit for increased lubrication

to the rocker gear. See ‘Accessories’ for full details.
Oil Feed Kit (1) RR1340
Banjo Bolt only (1) RR1340D
Washer – Copper (1) RR1340B

ENGINE COMPONENTS
Big – End Bearing Set (Conrod);
948 Models
Standard Size (1) 104821
+0.010” Oversize (1) 104821-010
+0.020” Oversize (1) 104821-020
+0.030” Oversize (1) 104821-030
+0.040” Oversize (1) 104821-040
+0.050” Oversize (1) 104821-050
+0.060” Oversize (1) 104821-060
All other Models except late 13/60
Standard Size (1) RTC1749
+0.010” Oversize (1) RTC1749-010
+0.020” Oversize (1) RTC1749-020
+0.030” Oversize (1) RTC1749-030
+0.040” Oversize (1) RTC1749-040
+0.050” Oversize (1) RTC1749-050
Late 13/60 Models
Standard Size (1) RTC1754
+0.010” Oversize (1) RTC1754-010
+0.020” Oversize (1) RTC1754-020
ENGINE +0.030” Oversize
+0.040” Oversize
(1) RTC1754-030
(1) RTC1754-040
OIL COOLER KIT +0.050” Oversize
+0.060” Oversize
(1) RTC1754-050
(1) RTC1754-060
FIT AN OIL COOLER KIT FOR PEACE OF MIND. Thrust Washer – Pair;
Kits include oil cooler radiator, fitting kit, filter All Models except late 13/60
adaptor, hoses & fittings, but not thermostat. Standard (1) 104820
Engine Oil Cooler Kit (1) 514082 Thermostat (Engine oil cooler) (1) RS1456 Oversize + 0.005 (1) 104820-005
Not included in oil cooler kit. Oversize + 0.010 (1) 104820-010
Late 13/60 Models only;
Oil Pump & Sump Crankshaft & Flywheel Standard
Oversize + 0.005
(1) BHM1366
(1) BMH1366-005
OIL PUMP AND FITTINGS CRANKSHAFT & BEARINGS Oversize + 0.010 (1) BMH1366-010
Oil Pump Assembly (1) GLP145 Crankshaft (Reconditioned); Oversize + 0.015 (1) BMH1366-015
All crankshafts include shells. Oversize + 0.025 (1) BMH1366-025
Drive Shaft & Gear Assembly (1) 104860
Oil Feed Kit (rocker shaft) (1) RR1340 Early 1200 scroll type (1) 305073R Oversize + 0.030 (1) BMH1366-030
A remote mounted kit for increased All (except late 13/60) (1) 307422R Woodruff Key (1) 105115
lubrication to the rocker gear. Late 13/60 (1) 308737R Shim - Crankshaft Sprocket (use as required);
Banjo Bolt only (1) RR1340D Pilot (Spigot) Bush (1) 105143 All except late 13/60
Washer – Copper (1) RR1340B Main Bearing Set; Shim (0.006") (a/r) 27138
948 Models Late 13/60 only;
SUMP PAN AND DIPSTICK
Standard Size (1) RH5293 Shim (0.004") (a/r) 145275
Sump Pan (1) 212006
+0.010” Oversize (1) RH5293-010 Shim (0.006") (a/r) 145276
Sump Gasket Set;
Inc Seals, not GK Engines (1) GEG216K +0.020” Oversize (1) RH5293-020 Sprocket - Crankshaft;
Less Seals, not GK Engines (1) GEG216 All other Models except late 13/60 All except late 13/60 (1) 100431
Inc Seals GK Engines (1) AJM279K Standard Size (1) RTC1759 Late 13/60 only (1) 119389
Less Seals, GK Engines (1) AJM279 +0.010” Oversize (1) RTC1759-010 Oil Deflector;
Sump Gasket Only (1) AJM517 +0.020” Oversize (1) RTC1759-020 All except late 13/60 (1) 100447
Oil Drain Plug (1) 22G2115 +0.030” Oversize (1) RTC1759-030 Late 13/60 only (1) 119390
Set Screw – Sump to Block (15) SH505051 +0.040” Oversize (1) RTC1759-040 Pulley - Crankshaft;
Washer – Locking (for SH505051) (15) GHF332 +0.050” Oversize (1) RTC1759-050 All except late 13/60 (1) 202465
Dipstick (1) 104864 +0.060” Oversize (1) RTC1759-060 Late 13/60 only (1) 217108
Tube – Dipstick (1) UKC4763 Late 13/60 Models Nut - Front Pulley;
Felt Seal/Washer (Dipstick) (1) 32307 Standard Size (1) RTC1753 All except late 13/60 (1) 128058
Oil Pressure Switch (1) GPS117 +0.010” Oversize (1) RTC1753-010 Late 13/60 only (1) 155357
Oil Filter; +0.020” Oversize (1) RTC1753-020 Fan Belt;
948 only (1) GFE107 +0.030” Oversize (1) RTC1753-030 All except late 13/60 (1) GCB11038
All other models (1) GFE119 +0.040” Oversize (1) RTC1753-040 Late 13/60 only (1) GCB11025
Adaptor for 948 (1) 12G2518 +0.050” Oversize (1) RTC1753-050
Use to adapt GFE119 if GFE107 is unavailable. Flywheel Assembly;
+0.060” Oversize (1) RTC1753-060 948, 1200 & 12/50
Coil Spring Clutch (1) 129460
Oil Pressure Gauge Kit (1) RX1351/O 1200, 12/50 & 13/60
Includes gauge pipe etc.
Diaphragm Clutch (1) 141675
Oil Pressure and Water
Ring Gear (1) 201350
Temperature Gauge Kit (1) RX1351/OW
Includes gauge pipe etc. Dowel (clutch cover locating) (1) DP410
Bracket (for remote mounting of gauge) (1) RB7050 Bolt (flywheel to crankshaft) (4) 138526
Adaptor; Tab Washer (2) 102076
Oil Pipe to Block (1) 143943 Dowel (1) DP619
Flywheel to crankshaft locating.
Temp Sender to Water Pump
Oil Pressure Gauge Housing
Washer - Copper
(1)
(1)
11K2846
AED172 COMPONENT & COMMISSION NUMBERS
& Oil/Water Gauge For adaptor 11K2846. Where commission and/or component serial numbers
You can either guess your oil pressure – “T” Piece (1) RX1352 are quoted in this parts catalogue (to help identify
or fit one of our kits. Required when fitting oil pressure gauge kit if retaining factory specification changes), they refer to
low Pressure warning light. components and/or parts when the vehicle was new,
and not subsequent replacements.

ENGINE COMPONENTS
Piston & Conrod Engine Gaskets Cylinder Head & Fittings
Piston Set (Per vehicle) Complete with Rings; & Oil Seals See: ‘Fuel System’ & ‘Exhaust System’ for manifold fittings.
Cylinder Head Rebuild Kit;
948 Head Gasket Set; Inc. new valves, guides, springs & head gasket set.
Standard (1) 129984 948 (1) RH5351 1200 up to GA80000E (1) RH5184RBK
Oversize + 0.020 (1) 129984-020 1200 Late (1) RH5017RBK
1200, 12/50 (1) GEG117 12/50 (1) RH5051RBK
Oversize + 0.030 (1) 129984-030 13/60 (1) GEG1181
Oversize + 0.040 (1) 129984-040 13/60 GE Prefix (1) RH5217RBK
Head Gasket only; 13/60 GK Prefix (1) RH5174RBK
Oversize + 0.060 (1) 129984-060 948 (1) GEG344
1200 & 12/50 Inlet Valve;
1200, 12/50 (1) AJM314 948 Saloon (4) 107872
Standard (1) 142659 13/60 (1) AJM374 948 Coupe (4) 113008
Oversize + 0.020 (1) 142659-020 Rocker Cover Gasket (1) AJM414 1200 (4) 126857
Oversize + 0.030 (1) 142659-030 Exhaust/Inlet Manifold Gasket; 12/50 (Twin Carbs) (4) 126893
Oversize + 0.040 (1) 142659-040 948, 1200, 12/50 (1) GEG615 13/60 (Prefix GE) (4) 126857
13/60 13/60 (1) AJM648 13/60 (Prefix GK) (4) 126893
Standard (1) 155907 Gasket Manifold to Down Pipe; Exhaust Valve;
Oversize + 0.020 (1) 155907-020 948 Saloon (4) 108962
948 (1) GEG716 948 Coupe (4) 111868
Oversize + 0.030 (1) 155907-030 1200 Single Carb;
Oversize + 0.040 (1) 155907-040 1200 (4) 144939
1962 to1967 (1) GEG717 12/50 (Twin Carbs) (4) 131179
Gudgeon Pin; 1967 to1970 (1) GEG702 13/60 (Prefix GE) (4) 144939
12/50 & 13/60 (4) 146485 1200 Twin Carb; 13/60 (Prefix GK) (4) 144965
Circlip - Gudgeon Pin (8) 508978 1967 to 1970 (1) GEG702 Valve Guide;
Piston Ring Set (Per Vehicle); 12/50 (1) GEG702 1200 & 12/50
All except 13/60 13/60 (1) GEG701 Standard (8) 111869
Standard (1) 129639 Timing Cover Gasket (1) 211126 Uprated Bronze (8) 111869UR
Oversize + 0.020 (1) 129639-020 Front Engine Plate to Block Gasket; 13/60 (Prefix GE)
Oversize + 0.030 (1) 139639-030 Standard (8) 58923
948, 1200, 12/50 (1) 205457 Uprated Bronze (8) 58923UR
Oversize + 0.040 (1) 139639-040 13/60 (1) 215350
13/60 13/60 (Prefix GK) (8) 121251
Sump Gasket Set; Valve Seat;
Standard (1) BHM1175 Inc Seals, not GK Engines (1) GEG216K
Oversize + 0.020 (1) BHM1175-020 Inlet (4) 130814
Less Seals, not GK Engines (1) GEG216 Exhaust (4) 132242
Oversize + 0.030 (1) BHM1175-030 Inc Seals GK Engines (1) AJM279K Valve Spring;
Oversize + 0.040 (1) BHM1175-040 Less Seals GK Engines (1) AJM279 All except late 13/60 (8) 121251
Oversize + 0.060 (1) BHM1175-060 Sump Gasket Only (1) AJM517 Late 13/60 (Prefix GK) (8) 136487
Con Rod Assy; Water Pump Gaskets; Split Collets (Pair) (8) 106663
Early 1200 (4) 146543 Water Pump to Housing (1) 138701 GK prefix 13/60 only.
Late 1200 (Non Circlip Type) (4) 142572 Housing to Cylinder Head (1) 138702 Collar – Valve Spring;
12/50 & Early 13/60 (4) 146543 Thermostat Gasket (1) GTG103 Upper (All models) (8) 105118
Late 13/60 (4) 146454 Lower
Fuel Pump to Block Gasket (1) 138591 All (except GK prefix 13/60) (8) 105119
Small End Bush (Except non Circlip types); Core Plug Set;
Each (4) 119813 GK (prefix 13/60 only) (8) 111870
948,1200 Dished Type (1) RH5041 Adaptor – Heater (1) 57602
Kit of 4 (1) 119813K4 Bucket type (1) RH5045 Hose to cylinder head.
Dowel (Hollow) (4) 107401 All other applications. Cylinder Head Stud;
Bolt Con Rod (8) UKC2598 Crankshaft Oil Seal - Front (Main) 984, 1200, 12/50 (9) 105121
All except GK Engine 13/60 (1) 100499 13/60 (8) 105121
Late GK Engine 13/60 (1) UKC1110 For lifting eye attachment (2) 121217
Crankshaft Oil Seal - Rear (Main) Nut (Cylinder head stud) (10) 110748
Non Scroll Type (1) 143456 Washer - Plain (10) WP9
Core Plug Set;
Dished type (948, 1200) (1) RH5041
Bucket type (1) RH5045
All other applications.
Screw – Oil feed (Rear of head) (1) SH605041
Washer – Copper (1) 500469
For screw SH605041.

ENGINE COMPONENTS
Rocker Cover
& Fittings
Rocker Cover – Standard (steel);
948 & Early 1200 (1) 115957
All other Models (1) 210862
Alloy Rocker Cover;
Polished (1) 214814ALLOY
Black Powder Coated (1) 214814AP
Oil Filler Cap only (alloy) (1) 214814C
Rocker Cover Gasket (1) AJM414
Oil Filler Cap - Standard;
Early 1200 (1) 113569
Non Closed Circuit Breather Type.
Late 1200 & 12/50 (1) 598231
13/60 (1) GZC1400
As an alternative GZC1400 can be used with the
following modification(s):-
- Rubber seal can be removed from the cap.
- Alternatively, retain the seal (which prevents the cap
from rattling) and drill a 1/16” hole off-centre of the cap
to avoid the riveted centre plate.
Stud – Rocker Cover to Head (2) 105123
Nut Lower (For 105123) (2) GHF201
Nut - Upper/Outer (2) GHF272
Washer – Plain (2) GHF301 Push Rods & Followers
Washer – Fibre (2) WF508
Breather Pipe (where fitted) - see ‘Fuel’. Push Rod (8) 111874
Tube – Push Rod Sealing; ALLOY ROCKER COVER 214814 - AVAILABLE IN
1200 Models only (8) 104826 POLISHED ALLOY OR BLACK POWDER COATED.
Cam Follower (Tappet);
Rocker Shaft & Fittings 948 and Early 1200 (8) 144343
Rocker Gear Overhaul Kit; 1200 (from GA177973E & GD59745E)
Includes shaft, rocker arms etc. and all 12/50 & 13/60
948/1200/1250 (1) 104829K Standard (8) 143552
13/60 (1) 144962K Uprated (8) 143552UR
Rocker Shaft only;
948, 1200 & 12/50 (1) 104829
13/60 (1) 144962
Rocker Shaft Assembly - 13/60 (1)144962R ASSY ROCKER GEAR OIL
Rocker Arm Inlet (4) 109023 FEED KIT
Rocker Arm Exhaust (4) 109024 A remote mounted kit for
Rocker Adjust Pin (8) 109495 increased lubrication to the rocker gear.
Nut – Locking (for 109495) (8) 57110 See ‘Accessories’ for full details.
Rocker Shaft Pedestals; Oil Feed Kit (1) RR1340
948, 1200 & 12/50 Models Banjo Bolt only (1) RR1340D
Number 1 (Drilled) (1) 128425 Washer – Copper (1) RR1340B
Numbers 2, 3 & 4" (3) 128424
13/60 Models
Number 1 (1) 144973
Numbers 2 & 3 (2) 144974
Number 4 (Drilled) (1) 144975
Shim (for pedestals) (a/r) 144973SHIM
Screw (for pedestals 128425/144975) (1) 104859
Stud Rocker Pedestal (4) 132495
Nut (for 132495) (4) GHF202
Washer – Locking (for 132495) (4) GHF333
Washer – Plain (for 132495) (4) WP9
Springs – Rocker Shaft;
Located between rocker arms.
948,1200 & 12/50 models
Centre Spring (1) 104830
Intermediate Springs (2) 105120
13/60 models (3) 105120
Centre & Intermediate Springs.
Collar – Rocker Shaft Ends
948, 1200 & 12/50 models (2) 104838
Springs (for 104848) (2) 105322
Pin – Collar Locating;
948, 1200 & 12/50 models (2) 500975
Plug – Rocker Shaft Ends;
13/60 models (2) 137811
Spring (for 137811) (2) 105322
Split Pin (for 137811) (1) PC10

ENGINE COMPONENTS
Camshaft & Timing Gear CAMSHAFT & DISTRIBUTOR DRIVE
Camshaft – Re profiled;
Early 1200 (small tappets) (1) 211433R CAMSHAFT
PLEASE REFER TO
Twin Carb Variant (1200 & 12/50) (1) 202931R LISTINGS FOR DETAILS
All other Models (1) RKC3305 & PART NUMBERS HB816
Cam Followers; GHF201 (2)
948/Early 1200 (8) 144343 GHF332 (2)
All others
Standard (8) 143552
121530
Uprated (8) 143552UR
Cam Bearing Set (1) RL1495
Cylinder block (where fitted).
GHF332
GHF201
DISTRIBUTOR & OIL PUMP DRIVE 104939 (.006)
Gear - Drive Shaft (1) 104860 RZS1216 125252 (.020)
Pin - Gear to Shaft (1) RZS1216
Pedestal - Distributor (1) 121530 105114
Shim - Pedestal 0.060” (a/r) 104939
Shim - Pedestal 0.020” (a/r) 125252 104861
Bush - Oil Pump/Distributor Drive (1) 131786 GHF332 (2)
Drive Shaft - Oil Pump (1) 104861
SH605071 104860
Bolt Distributor Locating (1) HB816
Washer - Locking (1) GHF332
Nut (1) GHF201 TO OIL PUMP
TIMING CHAIN
Timing Chain Tensioner Kit;
Inc. chain, tensioner, oil seal & gasket.
All except GK prefix 13/60 (1) RH5012 TIMING COVER-CHAIN & FITTINGS
GK prefix 13/60 only (1) RH5003
Timing Chain (1) 105131 35960
Sprocket - Camshaft (1) 35960 42425 36411
Locking Plate (1) 36411 100500 (2)
Sprocket to camshaft.
Set Screw (Locking Plate) (2) 100500 211126 WP18 (2)
Locking Plate (Camshaft to block) (1) 105114 PS103121 (2) 105131
Set Screw (Locking plate to block) (2) SH605071 GHF332 (6)
Sprocket - Crankshaft;
All except late 13/60 (1) 100431
Late 13/60 only (1) 119389 GHF201 (6)
Tensioner – Timing Chain (1) 42425
Pin (Drilled) (1) 33214 GHF332 (6)
Tensioner to anchor plate. 43752
Washer – Flat (for pin 33214) (1) WP18
Split Pin (for pin 33214) (1) PS103121 RR610040(2)
Anchor Plate – Tensioner (1) 43752 33214
Rivet (For anchor plate 43752) (2) RR610040 SH605071 (6)
OIL SEAL
TIMING COVER & FITTINGS REFER TO LISTINGS
Timing Cover; GHF332 (5)

All (except GK engine 13/60) (1) 201311 SE605031 (5)
13/60 (GK engine) (1) 217790 TIMING COVER
REFER TO LISTINGS
Gasket (1) 211126
Timing cover to engine plate.
Front Oil Seal – Crankshaft;
All (except GK engine 13/60) (1) 100499
13/60 (GK engine) (1) UKC1110
Set Screw;
Cover to Block (6) SH605071
Cover to Engine Plate (5) SE605031
Washer (locking for above) (17) GHF332
Nut (for SH605071) (6) GHF201

CLUTCH
500201A (CAP) CLUTCH SLAVE
CYLINDER
305936
GMC205 305936GR (BRAIDED)
REPAIR KIT
GRK1029
PJ8808
SH606071 (2)
119583
PC10 REPAIR KIT BH605181
PLEASE REFER
TO LISTINGS
GHF332 (2) FOR DETAILS &
GHF301 PART NUMBERS
SLAVE CYLINDER
REFER TO LISTINGS
CLUTCH MASTER CYLINDER GHF272
Clutch Assembly Clutch Hydraulics

Clutch Kits include cover, plate & bearing. QUALITY CLUTCH
COMPONENTS FOR Clutch Master Cylinder;
Clutch Alignment Tool (1) RX1385 YOUR HERALD. Original type (1) GMC205
948 61/4" Coil Spring: Non – Original type (1) GMC205ALT
Clutch Kit (1) RH5356 Repair Kit (Master Cylinder) (1) GRK1029
Clutch Cover (1) GCC104 Filler Cap (1) 500201A
Clutch Plate (1) GCP102 Gaiter/Boot (Master Cylinder) (1) 125217
Release Bearing (1) GRB206 Mounting Bracket (for GMC205) (1) 119583
Early 1200 61/4" Coil Spring; Set Screw (Cyl mounting) (2) SH606071
Up to GA19893E & GA1985E to GA201700E
Clutch Kit (1) RH5009 Clutch Slave Cylinder;
Clutch Cover (1) GCC132 61/4" Coil Spring Clutch (1) 110762
Clutch Plate (1) GCP102 61/2" Diaphragm Clutch (1) GSY103
Release Bearing (1) GRB206 Repair Kit (Slave Cylinder);
1200 61/2" Diaphragm; 61/4" Coil Spring Clutch (1) 501931
From GA1985E to GA201700E & from GA201701E 61/2" Diaphragm Clutch (1) 515297
Clutch Kit (1) GCK272 Bleed Screw – Slave Cylinder (1) 556508A
Clutch Cover (1) GCC197 Pipe – Master to Slave Cylinder - RHD:
Clutch Plate (1) GCP138
Release Bearing (1) GRB207 Standard (1) 305936
12/50 61/4" Coil Spring; Braided Stainless Steel (1) 305936GR
Up to GD76473E Clutch/Brake Fluid;
Clutch Kit (1) RH5009 Standard DOT3 (a/r) GBF103
Clutch Cover (1) GCC132 Silicone (0.5 litre) (a/r) RX1327
Clutch Plate (1) GCP102 Silicone (1.0 litre) (a/r) RX1326
Release Bearing (1) GRB206 Do not mix silicone with standard fluid.
1250 61/2" Diaphragm;
From GD76473E
Clutch Kit (1) GCK272
Clutch Cover (1) GCC197
Clutch Plate (1) GCP138 MASTER CYLINDER
Release bearing (1) GRB207 MOUNTING BRACKET
13/60 61/2" Diaphragm;
IN STAINLESS STEEL
Clutch Kit (1) GCK272
119583SS
Clutch Cover (1) GCC197
Clutch Plate (1) GCP138
Release Bearing (1) GRB207
SILICONE - DOT5 BRAKE &

CLUTCH FLUID
THE FACTS
Automec Silicone Brake Fluid (SBF) meets the USA Department of Transportation
Federal Motor Vehicle Safety Standard No 116 for DOT5 brake fluid, which has now
been adopted by the UK & Europe.
Silicone fluid is used in the same way as normal brake fluid. Drain the system, fill
with Silicone and bleed in accordance with the vehicle manufacturers instructions.
Initially the brake fluid remains purple, then after a while it changes to yellow. The
colour change is quite normal and does not affect the performance of the fluid.
Because Silicone fluid is non-hygroscopic (it absorbs less than 1% by weight of
moisture), corrosion in the system is virtually eliminated, while at the same time
the boiling point (important under emergency braking conditions) remains very high
at around 260 Centigrade (500F) unlike normal fluids that can be as low as 170C.
SBF is non-toxic, virtually inert (it is not glycol based) and is environmentally friendly.
All this means that it wont harm you, your cars braking components, or the paintwork
and because you don’t have to drain the system (unlike normal glycol based fluids),
it doesn’t harm the environment.
If Automec Silicone Brake Fluid becomes mixed with normal glycol fluid, they will
work safely, as they both have to if they are to be classified as D.O.T fluids.

ENGINE & GEARBOX MOUNTINGS

Engine Mountings Gearbox Mountings
Engine Mounting; All Models
Early 948 &1200 (2) 104526 Gearbox mounting (2) 122689
Fitted up to GA80000E.
Nut (Mounting to bracket) (2) GHF201
Late 1200, 12/50 & 13/60 (2) UKC5334 Washer - Spring (2) GHF332
Nut - Nyloc (Mounting to block) (2) TN3209 Washer - Plain (2) GHF301
Washer - Plain (2) GHF302 Bracket (1) 136890
Setscrew (Mounting to chassis) (4) SH606101 Setscrew - Bracket to plate (2) SH605051
Nut - Nyloc (for setscrew SH606101) (4) GHF223 Washer - Spring (2) GHF332
Engine Plate - front (1) 215372 Washer - Plain (2) GHF301
Gasket - Front Plate;
948, 1200, 12/50 (1) 205457
13/60 (1) 215350
GEARBOX MOUNTINGS
TN3209 (2) ENGINE

MOUNTINGS
GHF302 (2)
122689 (2)
136890
GHF223 (4)
GHF301 (2)
GHF332 (2)
GHF301 (2)
GHF332 (2)
UKC5334 (2) GHF201 (2)
SH605051 (2)
SH606101 (4)
If you know what you want

why wait until office hours?
Order online anytime!
it’s easy
it’s secure
it’s safe
it’s fast
it’s efficient Step 1 - click on your car model... Step 2 - click the part section you require...
Step 3 - find the part & click on the part number... Step 4 - choose your quantity & check price... Step 5 - add extra items to your list if required and
then checkout.
JOIN OUR E-MAIL LIST FOR NEWS ON SPECIAL OFFERS!

COOLING & HEATING
Water Pump Inlet Manifold Water
& Thermostat Pipe & Hoses
Water Pump (Includes pump to housing gasket); Hose Kit (per vehicle);
All except GK Engine 13/60 (1) GWP200 Includes all radiator/heater hoses & clips.
GK Engine 13/60 only (1) GWP128 948 & 1200 (1) RH5281
Water Pump Housing; 12/50 (1) RH5282
Cast Iron (1) 144297 13/60 (1) RH5283
Alloy (1) 144297A Pipe – Metal (Water return);
HOSE KIT 948 & 1200 & 12/50
Gaskets;
Water Pump to Housing (1) 138701 Stainless steel (1) 206085SS
Housing to Cylinder Head (1) 138702 13/60
Mild steel (1) 212935
Stud (Pump to Housing)
All except GK Engine 13/60 (3) TE605105 Radiator Stainless steel (1) 212935SS
GK Engine 13/60 only (3) 100433 & Hoses Adaptor – Water Pump Body;
Rear (1) 101343
Nut (for studs) (3) GHF201
Radiator – Reconditioned (Exchange); Upper (13/60) (1) 138350
Washer - Locking (for studs) (3) GHF332
All models (1) 305667R Sleeve Nut (for 101343) (1) 101302
Bolts (Housing to head);
Short (1) BH606181 305667 will fit all models, however for originality purposes Olive (for 101302) (1) TL11
we can have your unit reconditioned to special order. Adaptor – Cylinder Head (1) 57602
Intermediate (1) BH605201
Hose Kit (per vehicle); 948, 1200 & 12/50 only.
Long (1) BH605221 Includes all radiator/heater hoses & clips.
Washer - Locking (for 3 fixing bolts) (3) GHF332 Hose – Heater Inlet;
948 & 1200 (1) RH5281 948 & Early 1200 (1) 105177
Temperature Transmitter; 12/50 (1) RH5282 Late 1200 & 12/50 (1) 149803
13/60 only (1) GTR108 13/60 (1) RH5283 13/60 (1) 214411
Thermostat; Radiator Top Hose (1) GRH533 Hose – Heater Outlet (Smiths heater);
82º Standard (1) GTS104 Hose Clip (2) GHC1015 948, 1200 & 12/50 (1) 149699
74º Summer (1) GTS102 Radiator Bottom Hose (1) GRH265 13/60 (1) 214412
88º Winter (1) GTS106 Hose Clip (2) GHC913 Hose – Heater to valve (1) 511701
Gasket (Thermostat housing) (1) GTG103 Overflow Hose (1) ULC2122 Delaney heater.
Housing - Thermostat (1) 156333 Drain Tap (1) 132565 Hose Clips (Heater Hose) (4) GHC405
Bolt - Short (1) GHF103 Kenlowe Electric Fan Kit (1) RH5014 Hose – Water Pump to Inlet Manifold;
Bolt - Long (1) BH605141 Anti – Freeze; 13/60 Only (2) GRH900
Washer - Locking (2) GHF200 1 Litre (1) GAC2018
4.54 Litre (1) GAC2019 SMITHS WATER
KENLOWE Kalimex (Permanent coolant leak repair) (1) RX1554 VALVE - 560611
ELECTRIC FAN KIT Radiator Cap;
RH5014 13lb (1) GRC114
7lb (1) GRC112
DELANEY WATER
VALVE - 560612
Cooling Fan
Fan Assy;
4 Blade (UK home market) (1) 147972
7 Blade (Export)
Bolt – Fan to Pulley
(1) RKC2126
ENGINE OIL COOLER KIT Heater, Hoses & Valve
All except 13/60 (4) GHF117 FIT AN OIL COOLER KIT FOR PEACE OF MIND. Heater Assy;
13/60 only (4) SH604051 Kits include oil cooler radiator, fitting kit, filter adaptor, Smiths (Recon) (1) 910445R
Washer – Spring (4) GHF331 hoses & fittings, but not thermostat. Heater Matrix (Smiths) (1) 910445MATRIX
Fan belt; Engine Oil Cooler Kit (1) 514082 Delaney (Recon) (1) 810290R
All except 13/60 (1) GCB11038 Water Valve Assy;
Thermostat (Engine oil cooler) (1) RS1456
13/60 only (1) GCB11025 Not included in oil cooler kit. Smiths (1) 560611
Kenlowe Electric Fan Kit (1) RH5014 Delaney (1) 560612
“O” Ring – Adaptor to valve (1) C9928A
Hose – Heater Inlet;
RADIATOR RELIEF 948 & Early 1200 (1) 105177
COOLING SYSTEM ADDITIVE Late 1200 & 12/50 (1) 149803
Radiator relief allows your radiator to transfer heat more efficiently, 13/60 (1) 214411
reducing your engines operating temperature (which is obviously Hose – Heater Outlet (Smiths heater);
controlled by the thermostat) by up to 30•F. You therefore have ‘a little bit 948, 1200 & 12/50 (1) 149699
in hand’ for those hot days stuck in traffic. This proven coolant additive will 13/60 (1) 214412
also cut engine warm-up time in half which will reduce engine wear which
is most extreme when the engine is cold. Fully compatible with water and Hose – Heater to valve (1) 511701
Delaney heater.
anti-freeze and is safe with cast iron and all alloys.
G 30•F lower operating temperature Hose Clips (Heater Hose) (4) GHC405
G 50% quicker warm up time Heater Control Cable (1) 622442
G Safe with water/antifreeze mixture Demister Tube (Heater to windscreen) (2) 602621
G Safe with cast iron, alloy engines and heads Demister Outlet Cover (2) 703764
G Increased engine life!
G 100% biodegradable, non corrosive, non toxic
A MUST On top of dash.
G For use in all water cooled engines FOR ALL

RADIATOR RELIEF (946ml) RX1461
Treats 1 engine. OWNERS DEMISTER OUTLET COVER - 703764

FUEL SYSTEM
Inlet Manifold & Fittings
948
Inlet/Exhaust Manifold (Single Carb) (1) 303524
Inlet Manifold (Twin Carb) (1) 119242
Gasket – Manifold to Head (1) GEG615
Stud (Manifold to head);
Outer (2) 105124
Inner (4) 105125
Clamp – Manifold Fixing (4) 58258
Nut (for clamp) (6) 100498
Washer – Flat (6) GHF302
1200 & 12/50

Inlet/Exhaust Manifold (Single Carb) (1) 304951
Inlet Manifold (Twin Carb);
Front (1) 209947
Rear (1) 209946
Balance Pipe (1) 136830
Gasket (Balance pipe to manifold) (2) 136831
Bolt (Balance pipe to manifold) (2) BH605141
Sleeve (Manifold to head) (2) 112971
Gasket (Manifold to head) (1) GEG615
Stud – Manifold to Head;
Outer (2) 105124
Inner
Clamp – Manifold Fixing
(4) 105125
(4) 58258
Carburettor Components
Nut (for clamp) (6) 100498 948 & 1200 1200 & 12/50
Washer – Flat (6) GHF302 (To engine number GA34925E) (From engine number GA190341)
Stud (Manifold to downpipe) (3) TE605105 Carb type - Solex B28 ZIC - 2 Carb type - SU HS2
Nut (for TE605105) (3) 515369 Gasket Set (1) RH5147 Jet (Front carb) (1) AUD9104
Washer (for 515369) (3) GHF332 Needle - Float Valve (1) RH5166 Jet (Rear carb) (1) AUD9103
Drain Pipe (manifold) (1) 105393 Carb Service Kit (1) RH5289 Needle (2) AUD1478
Clip (for 105393 locates on sump) (1) 101436 Rubber Sleeve (air filter to carburettor) (1) 115643 Needle & Seat (2)WZX1100A
Stud (Carb to manifold) (2) UKC2231 Gasket Set (2) AUE810A
Nut (for 109459) (2) GHF201 1200 & 12/50 Float (2) WZX1300
(1200 from engine number GA43986E & all 12/50) Spring (Damper) (2) AUC4387
Washer (for GHF201) (2) GHF332 Carb type - Solex B30 PSE1
Jet Bearing Kit (2) WZX1341
Gasket Set (1) 516097
13/60 "Pump" Diaphragm Pack (1) 510723
Inlet Manifold; Needle - Float Valve (1) 510744
13/60
Non Breather type (1) 308324 Carb type - Stromberg CD150
Swedish market only. Diaphragm Pack (1) RH5206 Insulator Block (carb to manifold) (1) 137882
Closed Circuit Breather type (1) 214543 Carb Rebuild Kit (1) ZRK8 Gasket (carb to insulator to manifold) (2) 137881
Swedish market only. Rubber Sleeve (air filter to carburettor) (1) 510860 Throttle Spindle (1) 514964
Factory Brake Servo type (1) 148715
Butterfly (Throttle disc) (1) 513689
Gasket - Manifold to Head (1) AJM648 1200 Twin Carbs Screw (Butterfly to spindle) (2) 513690
Dowel - Manifold to Head (2) DS2512 (1200 to engine number GA190340)
Carb type - SU HS1 Gasket Set (1) RH5220
Stud - Manifold to Head;
Jet (2) WZX1595 Needle Valve (1) 517453
Inner (6) 105125
Outer (2) 105124 Needle (2) AUD1225 Diaphragm (1) 521153
Clamp - Manifold Fixing (Large) (2) 137845 Needle & Seat (2) WZX1101A Jet Orifice (1) 513700
Clamp - Manifold Fixing (Small) (4) 58258 Gasket Set (2) AUE800 Needle Jet (1) 515114
Nut (for clamps) (6) 100498 Float (2) WZX1302 Jet Orifice "O" Ring (1) 512317
Washer (for 100498) (6) GHF302 Carb Service Kit (1) RH5192
Kit contains Metering needle (515114),
Stud - Inlet to Exhaust Manifold (1) TE505111 Needle valve Kit (517453),
Nut (for TE505111) (1) GHF201 Carb Diaphragm (521153), Gasket set (RH5220).
Washer (for GHF201) (1) GHF332 Carb Repair Kit (1) RH5210
Kit contains "O" Ring (512317),Throttle Disc (513689),
Stud (Manifold to downpipe) (3) TE605105 Carb Jet ( 513700)’ Carb Spindle (514964)’
Nut (for TE605105) (3) 515369 Carb Damper (515112), Metering Needle (515114),
Carb Needle valve Kit (517453), Diaphragm (521153),
Washer (for 515369) (3) GHF332 Float (605833A), Gasket Set (RH5220).
Stud (Carb to manifold) (2) 129383
Nut (for 129383) (2) GHF201
Washer (for GHF201) (2) GHF332
13/60 CARB
OVERHAUL KIT
RH5210

FUEL SYSTEM
Accelerator
& Choke Cables
Accelerator Cable;
948, 1200 & 12/50 (1) 152677
13/60 (1) 148679
Clip - Cable to Pedal (1) 609729
Choke Cable;
948, 1200 & 12/50 (1) 401458
13/60 (1) 402694
Knob only - Choke Cable (13/60) (1) 143136
Spring - Throttle Return (1) 131368
Accelerator Pedal Bracket (1) 147655
Accelerator Pedal Spring (1) 122392 FUEL PIPE KIT
CHOKE KNOB
(13/60)
143136 Fuel Tank & Fittings
Fuel Tank Assy; FUEL TANK
All models except Estate
FILLER
Early models (Screw type sender unit) (1) 303480 NECK SEAL
The screw type sender unit tanks are not available 601661
use the later type with the matching sender (215846),
Retaining Ring (ARA1501) & Seal (ARA1502).
Late models (1) 517974
Air Cleaner - Standard Locking ring type sender unit.
The tanks are the larger 7 gallon units but do not
& Breather Hoses come with additional support, reserve bracket
or pickup pipe.
FUEL TANK DRAIN
Air Filter Element; Seal - Tank Drain Neck (to boot floor) (1) 608052 NECK SEAL
948 (1) GFE1009 Seal - Tank Filler Neck (1) 601661 (BOOT FLOOR)
All other models (1) GFE1015 Fuel Tank Sender Unit; 608052
Gasket - Filter to Carb (13/60) (1) 148006 Screw Type (1) 213411
Bolt - Air Filter to Carb (13/60) (2) 517051 Lock Ring Type (1) 215846
Breather Valve Assy (13/60) (1) 151444 Gasket - Sender Unit (all) (1) 2H1082
If fitted.
Diaphragm (Breather valve) (13/60) (1) 27H7758 Retaining Ring (for 215846) (1) ARA1501 FUEL TANK
Hoses (13/60); Seal (for ARA1501) (1) ARA1502 SENDER COVER
Sender Unit Cover (Not estate) (1) 123286 123286
Air Filter to Rocker Cover (1) 142990A
Rocker Cover to Breather (1) 156876 Fuel Pipe Kit (Tank to engine);
1200 (1) RH5047 Fuel Cap
1200 (Twin carbs) (1) RH5047
Fuel Cap;
12/50 (1) RH5047
Fuel Pump & Filter 13/60 (1) RH5026
Original Chrome Non Lockable
Seal only (for original cap)
(1)
(1)
601671
RS1441
Fuel Pump Assy (1) 208493 Connectors - Fuel Pipe;
Locking Type (Black plastic finish) (1) GSS193
Gasket - Pump to Block (1) 138791 In - Line Connectors (2) 125170
Grommet (Fuel filler to rear wing) (1) 601661
Stud - Pump to Block (2) 100433 Fuel Line to Tank (1) 122796
Nut (for 100433) (2) GHF201 Clip - Fuel/Brake pipe;
Washer (for GHF201) (2) GHF332 Metal Clip (Single) (a/r) 59191 LOCKING FUEL CAP
Fuel Filter - In Line (1) GFE7004 Plastic Clip (Double) (a/r) 624155 (BLACK) GSS193
K&N AIR FILTERS

These filters will give improved engine breathing
& performance.
Note; When fitting ‘K&N’ air filters, Sports
exhaust and/or Tubular extractor manifolds, the
carb metering needles may require changing
and/or the carbs re-adjusted.
K&N Air Filter;

1200 & 12/50 (1) RH5298
13/60 (1) RL1575
Cleaning Fluid (1 Litre) (K&N filters) (a/r) RX1346
Use to clean elements when servicing.
Element Oil (K&N filters);
Use to re-oil filter elements after cleaning.
57cc Sachet (a/r) RX1347
250ml Bottle (a/r) RX1348
400ml Aerosol (a/r) RX1349

EXHAUST
Manifold & Fittings Exhaust Systems Exhaust Systems
See also: Inlet Manifold & Fittings 948, 1200 & 12/50 Models.
Standard - Mild Steel Standard - Stainless Steel
948 Note: Fitting Kits include fittings, clamps, mountings, gaskets
Inlet/Exhaust Manifold (Single Carb) (1) 303524 MILD STEEL EXHAUSTS & jointing compound to assemble exhaust.
Exhaust Manifold (Twin Carb) (1) 303543 Most mild steel exhausts are no longer available, Bracketry is not included.
Stud (Manifold to head); having been discontinued by all the major
manufacturers. 948
Outer (2) 105124 Full Exhaust System (1) RH5021
Inner (4) 105125 Please refer to our Price Guide using the ‘GEX’ part Stainless Steel. Excludes fitting kit.
Clamp – Manifold Fixing (4) 58258 number prefix (see Staninless Steel listings) - Front pipe (1) GEX1246SS
Nut (for clamp) (6) 100498 without an ‘SS’ suffix - for current price and Silencer (1) GEX6038SS
Washer – Flat (6) GHF302 availability of mild steel exhaust components. Rear Silencer & Tail Pipe (1) GEX3197SS
We do offer - from stock, a full range of Stainless Fitting Kit (1) RH5021FK
Gasket (Manifold to head) (1) GEG615 Steel exhausts (at very affordable prices!), which
Gasket (Manifold to downpipe) (1) GEG716 will ensure long exhaust life and enhance the 948 (Twin carb)
Stud (Manifold to downpipe) (3) TE605105 value of your vehicle. Full Exhaust System (1) RH5023
Nut (for TE605105) (3) 515369 Stainless Steel. Excludes fitting kit.
Washer (for 515369) (3) GHF332 Front Pipe (1) GEX1247SS
Silencer (1) GEX6038SS
1200 & 12/50 Exhaust Fittings Rear Silencer & Tail Pipe
Fitting Kit
(1) GEX3197SS
(1) RH5023FK
Inlet/Exhaust Manifold (Single Carb) (1)
Exhaust Manifold (Twin Carb) (1)
304951
306212
& Mountings 1200 (Single carb 1962 to 1967)
Gasket (Manifold to head) (1) GEG615 For Fitting Kits, refer to Exhaust Systems. Full Exhaust System (1) RH5021
Stud (Manifold to head); Clip (front pipe to bracket) (1) GEX7512 Stainless Steel. Excludes fitting kit.
Outer (2) 105124 Bracket – Front Pipe Support; Front pipe (1) GEX1246SS
Inner (4) 105125 Note Front Pipe Bracket is NOT included in fitting kits. Silencer (1) GEX6038SS
Clamp – Manifold Fixing (4) 58258 948 Rear Silencer & Tail Pipe (1) GEX3197SS
Single Carb (1) GEX7043 Fitting Kit (1) RH5021FK
Nut (for clamp) (6) 100498
Washer – Flat (6) GHF302 Twin Carb (1) GEX7041 1200 (Single carb 1967 to 1970)
Gasket (Manifold to downpipe); 1200 Full Exhaust System (1) RH5030
All Single Carb (1) GEX7041 Stainless Steel. Excludes fitting kit.
1200
Single Carb 1962 to 1967 (1) GEG717 Twin Carb (1) GEX7043 Front Pipe (1) GEX1248SS
Single Carb 1967 to 1970 (1) GEG702 12/50 (1) GEX7041 Sleeve (for GEX1248SS) (1) GEX1248SSSLEEVE
Twin Carb 1967 to 1970 (1) GEG702 13/60 (1) GEX7511 Rear Silencer & Tail Pipe (1) GEX3198SS
Mounting Bracket (1) 105578 Fitting Kit (1) RH5030FK
12/50 (1) GEG702
“L” shape intermediate pipe. Not included in Fitting Kit. 1200 (Twin carb 1967 to 1970)
Stud (Manifold to downpipe) (3) TE605105
Rear Box & Tail Pipe Flexible Strap; Full Exhaust System (1) RH5023
Nut (for TE605105) (3) 515369
948 Stainless Steel. Excludes fitting kit.
Washer (for 515369) (3) GHF332 Front (1) GEX7041 Front Pipe (1) GEX1247SS
Drain Pipe (Manifold) (1) 105393 Rear (1) GEX7359 Silencer (1) GEX6038SS
Clip (for 105393 locates on sump) (1) 101436 1200 & 12/50 Rear Silencer & Tail Pipe (1) GEX3197SS
Stud (Carb to manifold) (2) UKC2231 Front (1) GEX7044 Fitting Kit (1) RH5023FK
Rear (1) GEX7044 12/50
13/60 13/60
Exhaust Manifold (1) 308086 Full Exhaust System (1) RH5039
Front & Rear (2) GEX7044 Stainless Steel. Excludes fitting kit.
Gasket (Manifold to head) (1) AJM648 Clamp Plate (4) GEX7510 Front Pipe (1) GEX1249SS
Studs (Manifold to head); Bracket (Not included in Fitting Kit) (2) GEX7511 Rear Silencer & Tail Pipe (1) GEX3198SS
Inner (6) 105125 Fitting Kit (1) RH5039FK
Outer (2) 105124 Clip (Real Silencer) (1) GEX7512
Clamp - Manifold Fixing (Large) (2) 137845 Bolt (2) BH605181 13/60
Clamp - Manifold Fixing (Small) (4) 58258 Full Exhaust System (1) RH5044
Stainless Steel. Excludes fitting kit.
Nut (for clamps) (6) 100498 Front Pipe (1) GEX1428SS
Washer (for 100498) (6) GHF302 Rear Silencer & Tail Pipe (1) GEX3198SS
Stud (Inlet to Exhaust Manifold) (1) TE505111 Fitting Kit (1) RH5044FK
Nut (for TE505111) (1) GHF201
Washer (for GHF201) (1) GHF332
Gasket (Manifold to Downpipe) (1) GEG701
Stud (Manifold to downpipe) (3) TE605105
Nut (for TE605105) (3) 515369
Washer (for 515369) (3) GHF332
13/60 MODELS BH605181

GEX1428SS
EXHAUST SYSTEM FRONT PIPE GEX3198SS
REAR SILENCER AND TAIL PIPE
& FITTINGS GHF332
GEX7511
FRONT PIPE BRACKET
GEX7512
GHF332 GHF103 GHF272
GHF201 GEX7512
GEX7510
GEX7510 GHF272
GEG701
BH605181
GHF332
GEX7044
GHF332
GHF103
105578 GHF103
515369 GEX7044
GHF301
GHF201
GHF272 GEX7510

EXHAUST
STAINLESS STEEL INSULATING
STANDARD EXHAUST SYSTEM - 13/60 HEAT WRAP
RH5044
Thermo-Tec exhaust insulating wrap reduces

under bonnet temperatures by as much as 70%,
this increases air intake and exhaust gas velocity
which adds performance.
Retaining the heat in the exhaust protects
you from mechanical burns and it will also help to
Sports Exhaust Systems prevent under bonnet fires. Any electrical
components which are close to the manifold will
Full Sports System; be less prone to heat failure, increasing their life
Inc. Manifold & Twin Box System. and performance. As an added benefit, under
948 1200 & 1250 (1) RH5296 bonnet noise is also reduced! Thermo-Tec can be
Will not fit with single carb manifold.
used on any 4 stroke, 2 stroke or diesel engines
Fitting Kit (948/1200, 1250) (1) RL1499 and contains no asbestos or carcinogens.
For sports system inc manifold gasket.
The Snap Strap Installation Kit secures
13/60 (1) RL1523SS Thermo-Tec exhaust insulation wrap to your
Will not fit with single carb manifold.
Use Spitfire MK3, 4, 1500 or Dolomite, tubular manifold/s. A stainless steel high
1500 inlet manifold. temperature material designed better than hose
Clearance is minimal between manifold and chassis, clamps and is easier to use.
may require slight modification to chassis box section FULL SPORTS SYSTEM -
flange. 13/60 Also recommended is Hy-cote paint. This
Fitting Kit (13/60) (1) RL1501 RL1523SS preserves and protects the exhaust wrap after
For sports system inc manifold gasket. installation. Extra resins and binders seal the
Part Sports System (all models); (1) RV6109SS pores, toughen the surface and help extend the
Inc. Link Pipe, Y – section & Twin Exhaust Boxes. life of the wrap.
Can be adapted to fit standard downpipe (use Adaptor
RL1496SPORT). APPLICATION GUIDELINES FOR TUBULAR MANIFOLDS
Adaptor (1) RL1496SPORT ENGINE INSULATING SNAP STRAP TYPICAL
Links Sports Systems to Standard Downpipe. TYPE WRAP KIT APPLICATION
4 Cylinder 1 x RX1382 1 x RX1383 Herald, Spitfire,
TR7,
Dolomite Sprint
6 Cylinder 2 x RX1382 1 x RX1383 Vitesse, GT6
TR6
8 Cylinder 2 x RX1382 1 x RX1383 TR7 V8, TR8,
Stag, Rover SD1
GUIDE TO TYPICAL AMOUNT OF WRAP REQ’D BY PIPE SIZE

PIPE SIZE 2" 3" 4" 5" 6"
INCHES OF WRAP
PER FOOT OF PIPE 44" 57" 70" 83" 96"
Exhaust Insulating Wrap - 2" x 50' RX1382

Snap Strap Exhaust Wrap
PART SPORTS SYSTEM - Installation Kit RX1383
ALL MODELS Hy-cote Paint, Aerosol (400ml) RX1432
RV6109SS Available in black OR aluminium.
Tubular Exhaust
Manifold - Stainless Steel
Note: when fitting a Tubular Manifold the carbs may require
adjustment.
4 Branch Tubular Exhaust Manifold;
Twin carb models only. STAINLESS
948 1200 & 1250 (1) 307270SS STEEL TUBULAR
13/60 (1) RL1206SS MANIFOLD
Gasket (Manifold to head); FOR 13/60
948 1200 & 1250 (1) GEG615 RL1206SS
13/60 (1) AJM648

GEARBOX
THE EASY & COST EFFECTIVE WAY TO SH605091 (8)
REPLACE YOUR TIRED GEARBOX. CLUTCH HOUSING/OPERATION DP205
REFER TO LISTINGS FOR FULL DETAILS. 129358 (2)
3 RAIL TYPE GEARBOX GHF332 (11) PIVOT BUSH
GHF201 (11)
109182 GHF333 (4)
PUSH ROD
GHF104 (4)
ULC2713
129412
TOLERANCE RING 122566
FRONT COVER/
CLUTCH FORK SEAL
REFER TO
LISTINGS
210449
CLUTCH RELEASE CLUTCH
BEARING BELLHOUSING
REFER TO LISTINGS
500464 (1)
112516 GHF105 (1)
Gearbox Unit Assembly CARRIER
112509 (2)
GHF202 (1)
PC34
DS916 (2)
Gearbox Unit Assembly – 3 Synchro; RELEASE BEARING
GHF333 (1)
Reconditioned (exchange). REFER TO LISTINGS GHF106 (1)
Supplied less bell housing, speedo/pinion housing, gear DOWEL BOLT GHF301 (1)
lever, top cover extension & ancillaries.
948 (Customers own unit) (1) 506828R
All Models except 948 (Exchange) (1) RH5049R
Gearbox Unit Assembly – 4 Synchro; Clutch Housing
Reconditioned (exchange).
Supplied less bell housing, speedo/pinion housing, gear & Operation
lever, top cover extension & ancillaries.
Bell Housing (1) 210449
All Models except 948 (Exchange) (1) RH5089R
Front Cover/Seal (Scroll type) (1) 122566
Gear Oil EP90 (0.5L) (a/r) GGL190
Dowel for cover (1) DP205
Gearbox Mountings;
See: “Engine & Gearbox Mountings” for fixing bolts/nuts etc. Release Bearing;
Gearbox Mounting (Rubber) (2) 122689 Coil Spring Clutch (1) GRB206
Tunnel Cover - Gearbox (Fibreglass) (1) 706120 Diaphragm Clutch (1) GRB207
Seal Kit (Tunnel Cover) (1) RH5091 Carrier – Release Bearing;
Diaphragm Clutch (1) 139563
Clutch Fork;
IMPORTANT Diaphragm Clutch
Tolerance Ring
(1) 213032
(1) 129412
Gearbox Information IF YOU’VE HAD
TO STRIP YOUR
Fulcrum Pin
Dowel
(1) ULC2713
(2) DS916
EXCHANGE UNITS GEARBOX, USE Plug (Throughout sleeve to lever) (2) 112509
OUR GEARBOX Pin – Pushrod to Lever (1) 112516
All our Gearbox units are supplied on a strict OVERHAUL KIT
‘LIKE for LIKE’ exchange basis. WHEN RE- Push Rod (1) 109182
Your old exchange unit(s) MUST be undamaged, BUILDING. Bush (2) 129358
drained of oil and be in a totally serviceable PHOTO SHOWS Dowel (Font end cover to bell housing) (1) DP205
OVERHAUL KIT Bolt (Housing to gearbox) (1) GHF105
condition, before being returned to us for refund FOR 3 SYNCHRO
of exchange surcharge. (3 RAIL TYPE) Washer – Copper (1) 500464
GEARBOX. Bolt (Bell housing to gearbox) (4) GHF104
Washer – Spring (for GHF104) (4) GHF333
Split Pin (Oil drain hole) (1) PC34
Gaskets & Oil Seals Setscrew (Bell housing to engine) (8)SH605091
(Gearbox) Washer - Spring (11) GHF332
Nut (11) GHF201
Gasket Set (1) RH5031
Dowel Bolt (Bell housing to gearbox case) (1) GHF106
Gaskets;
Washer (for GHF106);
Bellhousing to Gearbox (1) 122569
Plain (1) GHF301
G/box to Rear Extension (1) 106437
Spring (1) GHF333
Top Cover to Gearbox (1) 22G1911
Nut (for GHF106) (1) GHF200
Remote Extension to Top Cover (1) 120305
Casing – Rear Extension (1) 106437
Oil Seal – Rear Output (1) 88G564 Gearbox Case/
Rear Extension
Gearbox Casing;
Gearbox Plug – Oil Drain
Plug – Oil Drain (magnetic)
(1)
(1)
114774
155660
Reconditioning Kits Plug – Oil Filler (1) 114774
Gearbox Overhaul Kit; Gaskets;
Kit includes gaskets, countershaft, synchro Bellhousing to Gearbox (1) 122569
rings, springs, bearings, circlips & needle rollers. G/box to Rear Extension (1) 106437
3 Synchro Type (1) RH5055 Top Cover to Gearbox (1) 22G1911
4 Synchro Type (1) RL1538 Remote Extension to Top Cover (1) 120305
Casing (Rear extension) (1) 106437
Bearing (Rear extension) (1) 117511
Oil Seal (Rear extension) (1) 88G564
GEARBOX
Gear Lever – Remote GEAR LEVER & ITEMS MARKED * NT605041
& Top Cover Fittings TOP COVER EXTENSION ARE INCLUDED IN GEAR
LEVER BUSH KIT
GEAR – LEVER FITTINGS 611353

Gear Lever; GAITER
126607
948 (1) 121487
1200, 12/50 (1) 129121 126754 (2)
13/60 (1) 149136
Gear Knob (Alternative - see photo); REFER TO
LISTINGS
Leather (1) RL1528L
Wood (1) RL1528W *119573 *129119
Leather (larger AMCO type) (1) RL1528LA *128373
Wood (larger AMCO type) (1) RL1528WA 611177 *146303A (2)
Lock Nut (for gear knob) (1) NT605041 *156910
*119251 118054
Bush Kit (Gear lever) (1) 519770
Stops those annoying buzzing noises and GHF201
tightens up the gear change action. *119263
Gaiter (Gear lever) (1) 611353
REMOTE FITTINGS *119252 *156910
TOP COVER
Top Cover Casing; EXTENSION
*138685
948 (1) 303283 REFER TO 125054
1200, 12/50 & 13/60 (1) 306152 519770
LISTINGS 120307
Gasket (extension to top cover) (1) 120305 BUSH KIT
Nut (locates to studs on top cover) (4) GHF201 RF2607 (2)
Washer – Spring (for nut GHF201) (4) GHF332 GHF201 (4) SH604091
Plate – Reverse baulk (1) 120307
GHF271
Rivet (for plate 120307) (2) RF2607 GHF332 (4)
Bolt (gear lever to operating shaft) (1) 125054
Nut (for bolt 125054) (1) GHF271
129952
Operating shaft (rear/long) (1) 129952 *119262 REAR OPERATING
Bush (operating shaft) (1) 119262 127741 SHAFT (LONG)
Centre Coupling (1) 127741 155801 (2) (NYLON)
Setscrew (centre coupling to shaft) (1) SH604091
Washer (special – nylon) (2) 155801 GHF271 DS2516
Nut – nyloc (1) GHF271 127740
Dowel (1) DS2516 (FRONT OPERATING
Centre coupling to operating shaft. 120305 118053 SHIFT (SHORT)
Operating Shaft (front/short) (1) 127740 122653
‘O’ Ring (2) 118053
For front operating shaft (127740) 118053
& gear selector (118040). 118040
Gear Selector (1) 118040 GEAR SELECTOR
Setscrew (Taper/Wedglok) (1) 122653
Selector Shafts;
1st & 2nd (1) 108020 Speedo Cable
3rd & 4th
Reverse
(1) 108021 & Drive Pinion Gear Lever Knobs
948, 1200, 12/50 (1) 108022 Speedo Cable (1) GSD111 Gear Lever Knob;
13/60 (1) 134290 Speedo Drive Pinion (1) 119100 Wood (1) RL1528W
Selector Forks; ‘O’ Ring (2) NKC101A Leather (1) RL1528L
1st & 2nd (1) 113868 Housing/Bearing (Speedo drive Pinion) (1) 144621 Wood (Larger Amco style) (1) RL1528WA
3rd & 4th (1) 106268 Leather (Larger Amco style) (1) RL1528LA
TOP COVER AND SELECTORS

106957 YKC1937
BH604111 3 RAIL TYPE GEARBOX
TOP COVER GHF331

SH604071
113868
SELECTOR
FORK 1ST/2ND
106269
22G2198 BLS110
136990
106489
REVERSE SELECTION SHAFT 106481
REFER TO LISTINGS 106478
PIN
104449 (6)
122653 (3)
158585
106489
108020
1ST/2ND 108021
SELECTOR SHAFT 106481 SELECTOR SHAFT 106268
3RD/4TH SELECTOR FORK 3RD/4TH

GEARBOX
MAINSHAFT & INPUT GEARS CR620325 117509
148409 BLS108 (3) 509652 WASHER
3 SYNCHRO SYNCHRO RING 1ST GEAR SLEEVE
3 RAIL TYPE GEARBOX 147354A 106388 (3) 119131
BUSH 3RD GEAR 37948 GEAR/SPEEDO DRIVE
148409 111424
SYNCHRO RING BUSH 2ND GEAR
104438
3RD GEAR 112654 WASHER
REFER TO
LISTINGS
BLS108 (3) 104433
MAINSHAFT
106475 CENTRE BEARING
104445 (3)
112672 BLS108 (1)
37948 (3) 2ND GEAR
159978 THRUST
WASHER
REFER TO 106262 204679 WL600121
TKC6444 LISTINGS
NH609041
148409 NEEDLE ROLLER
SYNCHRO RING 156968 REFER TO LISTINGS
SYNCHRO HUB
3rd/4th
213113
INPUT SHAFT DRIVE FLANGE
REFER TO LISTINGS
CR620325 106365
OIL THROWER
104438 104433
WASHER 112654
Input Shaft -
Mainshaft & Gears
INPUT SHAFT & FITTINGS
Input Shaft (1) 213113
Oil Thrower (1) 106365
Bearing – Front (Locates in main case) (1) 104433
Snap Ring (1) 112654
Retains bearing 104433 in casing.
Washer (1) 104438
Circlip (1) CR620325
MAIN SHAFT & FITTINGS
Mainshaft (1) 204679
Washer – Mainshaft (1) 117509
Gear (speedo drive) (1) 119131
Circlip (centre bearing) (1) CR620325
Washer (centre bearing) (1) 104438
Snap Ring (centre bearing) (1) 112654 Countershaft - Reverse
REVERSE GEAR & OPERATING LEVER
Centre Bearing (1) 104433 Gear & Operating Lever Reverse Idler Gear Assy (1) 113077
Synchro Hub 1st/2nd (1) 509652
COUNTERSHAFT & LAYGEAR Bush (Reverse Gear) (1) 129862
Ball – Synchro Hub (4) BLS108
Countershaft (Laypin) (1) 113230 Distance Piece (1) 137687
Spring – Synchro Hub (3) 106388
Thrust Washer (countershaft rear) (1) 106270 Spindle – Reverse Gear (1) 113071
Shim – Synchro Hub (3) 37948
Laygear Cluster (1) 154829 Operating Lever (Reverse) (1) 106254
Pin - Synchro Hub (1) 106475
Bush – Countershaft (2) 112477 Fulcrum Pin (threaded both ends) (1) 106448
Synchro Rings;
Thrust Washer (countershaft front) (1) 113229 Nut – Nyloc (Fulcrum pin) (1) TN3209
2nd Gear (1) 148409
Bolt (countershaft locating) (1) 106476 Stud (Spindle locking) (1) 106477
3rd & 4th Gear (1) 148409
Washer – Locking (1) GHF332 Washer – Locking (1) GHF332
Washer - 2nd Gear (1) 106262
2nd Speed Gear (1) 112672
Bush 2nd Gear (Bronze) (1) 111424 COUNTERSHAFT REVERSE GEAR
Thrust washer (2nd/3rd Gear); & OPERATING LEVER
0.152”/0.154” (a/r) 111422
0.156.5” / 0.158.5” (a/r) 149963 4 SYNCHRO GEARBOX
3 RAIL TYPE GEARBOX 113230 GHF332
0.161” / 0.163” (a/r) 131843 COUNTERSHAFT/LAYPIN
Bush 3rd Gear (Bronze) (1) 147354A
3rd Speed Gear; 106476
Early 1200 (to G/box GA260810) (1) 116169 106270
Late 1200, 12/50, 13/60 (1) 150921 THRUST WASHER
Thrust Washer (1) 159978
Fits between 3rd gear & circlip. 154829
COUNTERSHAFT/LAYGEAR TN3209
Circlip (3rd gear) (1) TKC6444 CLUSTER 129862
Synchro Hub 3rd/4th (1) 156968 BUSH ONLY
113077
Ball – Synchro Hub (3) BLS108
Shim Synchro Hub (3) 37948 112477 (2)
BUSH 106271 106448
Spring – Synchro Hub (3) 104445
WASHER
Needle Roller Bearing;
Early (1) 144782
Late (1) 118507 106254
DRIVE FLANGE & FITTINGS

Drive Flange; 106477
All except late 13/60 (1) 109050 113071
Late 13/60 (strap type propshaft) (1) 109025 113229 GHF332
THRUST WASHER
Washer (Spring) (1) WL600121
Nut (1) NH609041

Differential Differential Mountings Propshaft

DIFFERENTIAL - DRIVE SHAFT - PROPSHAFT
Differential - Reconditioned; FRONT MOUNTINGS Propshaft;
4.55:1 (948) (1) 509502R Mounting Bracket (1) 132435 All except late 13/60 (1) 212549
4.11:1 (all other models) (1) 214683R Front Mountings; Late 13/60 (Strap type propshaft) (1) 217071
Gear Oil (EP90) 0.5L (a/r) GGL190 Upper Universal Joint (2) GUJ115
Crown Wheel & Pinion; Fitted up to diff GA80000 (2) 132956 Bolt - Propshaft (8) 129361
4.875:1 (948) (1) 502017 All other models Nut - Nyloc (8) GHF272
4.11:1 (all other models) (1) 510005 Standard (2) 133568
Oil Seals; Polyurethane (2) 133568POLY
Front Pinion (1) 109054 Lower
Side (Output shaft/Inner axel) (2) 117952 Standard (2) 131796
Bearings: Polyurethane (2) 131796POLY
Front Pinion – Outer (1) 217268 Washer – Steel (2) WM810
Front Pinion – Inner (1) 104556 Nut – Nyloc (2) TN3209
Side (Output shaft/Inner axel) (2) 130355 Bolt (front cross piece to diff) (2) 132856
Spacer (1) 110907
Fits between front pinion bearings. Washer (for bolt 132856) (2) WA600071
Nut (for bolt 132856) (2) GHF224
REAR MOUNTINGS
FROM COMPLETE Mounting Bush;
DIFFERENTIALS TO Standard (2) 117578
GASKETS, WE HAVE THE Polyurethane (2) 117578POLY
PARTS YOU NEED.
REFER TO LISTINGS FOR Bolt (diff to chassis) (2) BH607201
FULL INFORMATION & Nut - Nyloc (for bolt BH607201) (2) GHF224
DETAILS OF DIFFERENTIALS,
MOUNTINGS & DIFF’ Washer - Plain (for bolt BH607201) (2) WM600071
COMPONENTS. Top (Spring) Mounting IF YOU ARE OVERHAULING THE DRIVE SHAFTS AND
Stud – Leaf Spring to Diff Case (6) 131008 REAR HUBS, WE HAVE THE PARTS.
CONNETS DIRECTLY TO
OUTER DRIVE
SHAFT
149117 139530 INNER AXLE SHAFT
533360A
Inner Axle Shaft

Inner Axle Shaft (2) 149117
117952 (2)
Oil Seal (2) 117952 OIL SEAL
Bearing (inner axle shaft) (2) 533360A
Circlip (2) 139532
Retaining Cap – Bearing (2) 139530 123803 (8) 139532 (2)
Screw – Bearing Cap (8) 123803 SCREW CIRCLIP
Washer – locking (8) GHF331
Gasket – Diff Housing (1) 114749 GHF331 (8)
Filler Plug (1) 114774 SEE ILLUSTRATION: “DIFFERENTIAL
Drain Plug (1) 114774 GEARS AND CROWN WHEEL & PINION”. 114749 (1)
GASKET
Nut – Castellated (1) 109049
Washer – Plain (1) WP12
Split pin (1) PC34 OUTER DRIVE SHAFT & HUB
INNER AXLE SHAFT
Outer Drive Shaft & Hub 129361 (8)
Rear Hub Puller Tool (1) RX1542
Drive shaft only; (2) 128135
Includes yoke, but less drive flange & UJ.
Drive flange only (inner) (2) 37H4973
Bolt (flange to drive shaft) (8) 129361
Nut (for flange bolt) (8) GHF272 37H4973 GUJ115
Universal Joint (2) GUJ115 INNER DRIVE
FLANGE ONLY GHF272 (8)
Oil Flinger (stone guard) (2) 128469
Woodruff key (drive shaft to outer hub) (2) 104581 128135
Rear hub bearing kit (per hub) (2) GHK1022 204226 (2) A
Kit not illustrated, includes items below marked *. INNER HUB
128469 (2)
Hub seal - Inner* (2) 128978 FLINGER
A 56935 (2)
Bearing - Inner* (needle roller) (2) 117853 NIPPLE 104581 (2)
Inner Hub (bearing housing) (2) 204226 514370 122115 (2) KEY
TRUNNION KIT PER
Grease nipple (alternative to plug) (2) 56935 VEHICLE PLUG 128978 (2)
GFG117 (2) SEAL
Blanking plug (alternative to nipple) (2) 122115 A
Trunnion kit (per vehicle) (1) 514370
Indicated as 'A' in illustration. GHS111 (2)
OIL SEAL
Gasket* (2) GFG117
Hub seal housing 104773 to inner hub. 121860 (4)
Bearing - Outer* (2) GHB117 21H5774 GHB117 (2) TAB WASHER
WHEEL STUD BEARING
Hub Seal - Outer* (2) GHB111 117853 (2)
Housing (outer hub seal) (2) 104773 REAR HUB BEARING
PULLER 104773 (2) (NEEDLE
Oil catcher/flinger (2) 104582 TOOL - OIL SEAL ROLLER)
Tab washer (4) 121860 RX1542 HOUSING
Bolt (tab washer) (8) 121862 104582 (2)
OIL CATCHER
Drive flange (outer) (2) FAM2004 121862 (8)
Wheel stud only (8) 21H5774
Washer (for nut 510618A) (2) 142333 FAM2004
OUTER DRIVE FLANGE 142333 (2) 510618A
Nut (drive shaft retaining) (2) 510618A WASHER

FRONT SUSPENSION
OUR ANTI-ROLL BAR CONVERSION KIT
(217033K) ALLOWS THE LATER TYPE ROLL
POLYURETHANE
BAR TO BE FITTED TO ALL MODELS BUSHES
Polyurethane bushes out-perform standard
rubber bushes and last longer too!
Front Anti-Roll Bar IF YOU REALLY WANT TO IMPROVE THE

HANDLING, THEN POLYURETHANE BUSHES
ORIGINAL ANTI-ROLL BAR LATER TYPE ANTI-ROLL BAR (UPRATED) ARE A GOOD START.
Anti-Roll Bar (Original) (1) 207093 Anti-Roll Bar (1) 217033 REFER TO LISTINGS THROUGHOUT THIS
NCA - See conversion kit.
Overhaul Kit (Anti-roll bar) CATALOGUE FOR FULL AVAILABILITY.
Anti-Roll Bar Conversion Kit (1) 217033K Not illustrated.
Not illustrated - see photo. Per car; Includes 2 links (125481/125482), 2 nuts (GHF224),
The original anti-roll bar (207093) is not currently available. 2 studs (125074), 2 nuts (GHF223), 2 standard bushes (155310),
This conversion allows the later type bar to be fitted to early 2 clamps (155308), 2 ‘U’ bolts (155307), 4 nuts (GHF222) and ALL MODELS
cars & includes; Anti-roll bar (217033), 2 bushes (155310), all washers. Link - Anti-roll bar;
2 clamps (155308), 2 ‘U’ bolts (155307), nuts and washers. with Standard Bushes (2) RL1286 Right hand (1) 125481
Kit includes standard rubber bushes.
with Polyurethane Bushes (2) RL1286POLY Left hand (1) 125482
Overhaul Kit (Original anti-roll bar) Nut (Link mounting to suspension) (2) GHF224
Not illustrated. Bush - Roll Bar Mounting (for 217033);
For original (early) spec’ anti-roll bar (207093) only.
Washer (for nut GHF224) (2) WA600071
Standard Material (2) 155310
Per car; Inc 2 links (125481/125482), 2 nuts (GHF224), 2 studs Stud (Link to roll bar) (2) 125074
Polyurethane Material (2) 155310POLY
(125074), 2 nuts (GHF223), 2 standard bushes (123998), Washer (for stud 125074) (2) GHF333
2 clamps (123502), 2 ‘U’ bolts (123694), 4 nuts (GHF222). and Clamp (Bush retainer) (2) 155308
Washer (for stud 125074) (2) WA600071
all washers. ‘U’ bolt (2) 155307
Nut (for stud 125074) (2) GHF223
with Standard Bushes (1) RH5064 Nut (for ‘U’ bolt 155306) (4) GHF222
with Polyurethane Bushes (1) RH5064POLY Washer (for ‘U’ bolt 155306) (4) GHF332
Bush - Roll Bar Mounting (for 207093); MORE STOCK
Standard Material
Polyurethane Material
(2) 123998
(2) 123998POLY
HELP US TO HELP YOU EVERY DAY
Clamp (Bush retainer) (for 207093) (2) 123502 If the part you require is not listed here, please phone and
To ensure you receive the correct part, wherever
‘U’ bolt (for 207093) (2) 123694 possible please quote; model, year, chassis and/or engine enquire. By now we might well have it. For prices, terms
Nut (for ‘U’ bolt 123694) (4) GHF222 number etc, plus, any component information. & conditions etc, please refer to our latest price guide.
Washer (for ‘U’ bolt 123694) (4) GHF332
FRONT ANTI-ROLL BAR

GHF223
WA600071
125481
GHF224
WA600071 125074 FRONT
GHF333
125482
GHF222 (2) ANTI-ROLL BAR
GHF332 (2) PLEASE REFER TO WA600071
LISTINGS GHF223
GHF224
MO GHF222 (2)
UNT
ING GHF332 (2)
BUS
(BU CLA H
SH MP
RET
AIN WA600071
‘U’ ER)
PLE BOL
ASE T GHF333
LIS REFE
TIN R T 125074
GS O

FRONT SUSPENSION
FRONT HUB & UPPER WISHBONE 119451 (4) GHF223
119451 P (4)
119272

3 RH
BH606181 (4)

4 LH

15
10

9
119272
11
GSJ155 (2) GHF222

12
GHF332
NSS
BH605181 (4)
GHF275 WC112081 (2)

1 RH

13
WL600071 WD600071
2 LH
GHF224
13

1 RH
3 RH
5 RH
16
16

2 LH
4 LH
6 LH
GHB111 (2)
WC112081 (2)
8
GHS110
UHN445
21H5774 (8)
LN30041

17 122126 (2)
102690 (2)
GHB110 (2)
PC20 (2) Early 1200 & 12/50 models.
LN2211 (2) 102689 (2) Early 1200 from GA29284 to 46959 (‘63-’67).
12/50 from GA46960 to 127238 (‘63 - ‘67) and vehicles converted to disc using factory conversion.
Front Hub Late 1200 & 12/50 from 1967 on. All 13/60 models. Original factory spec.
& Upper Wishbones Illus No. Description Drum Brakes Early Discs Late Discs
Upper Suspension Overhaul Kit; Part No Part No Part No
Per side & includes; 1 ball joint (GSJ155), 2 bolts (BH605181),
2 nuts (GHF222), 2 washers (GHF332), 1 nut (GHF224), 1 Tie Rod Steering Lever RH 205504 205504 211048
1 washer (WD600071), 2 bushes (119451), 2 bolts (BH606181),
& 2 nuts (GHF223). 2 Tie Rod Steering Lever LH 205505 205505 211049
Standard Bushes (2) RH5080 3 Vertical Link RH 209222 209222 GSJ265
Polyurethane Bushes (2)RH5080POLY
Top Wishbone & Bush (4) 119272 4 Vertical Link LH 209223 209223 GSJ266
Supplied with standard bush only. 5 Calliper Mounting Plate RH N/A 210892 N/A
Bush only (Inner - upper suspension arm); 6 Calliper Mounting Plate LH N/A 210893 N/A
Polyurethane Material (4)119451POLY 7 Sealing Ring (Not shown) N/A 138051 138051
Bolt - Wishbone Rear (4) BH606181 8 Water Shield N/A 138559 138559
Nut - Nyloc (for bolt BH606181) (4) GHF223 9 Setscrew (top) SH605041 (4) SH606061 (4) N/A
Ball joint (2) GSJ155
Nut - Nyloc (Ball joint to vertical link) (2) GHF224 10 Washer - Spring GHF332 (4) GHF332 (4) N/A
Washer - Locking (for nut GHF224) (2) WD600071 11 Tab Washer 106641 (2) WL600071 (2) N/A
Bolt - Wishbone Front (4) BH605181 12 Bolt 122195 (2) BH606201 (2) N/A
Locates ball joint to wishbone.
Nut (for bolt BH605181) (4) GHF222 13 Bolt (Vertical link to tie rod) 118324 (2) SH606101 (2) 159514 (2)
Washer (for bolt BH605181) (4) GHF332 14 Washer - Spring (Not shown) N/A N/A WL600071 (2)
Nut (Stub axle to vertical link & tie rod) (2) GHF275 15 Nut Nyloc (Vertical link to tie rod) GHF223 (2) GHF223 (2) N/A
Washer (for nut GHF275) (4) WC112081
Water Shield (2) 138559 16 Stub Axle 132448 132448 UKC697
Grease Nipple (Vertical link) (2) LN30041 17 Front Hub Assy 112431 146479 146479
Grease Plug (Alternative to LN30041) (2) UHN445
Trunnion Seal (2) 122126
Vertical link to lower trunnion.
See; ‘Front Spring - Shock Absorber & Lower Wishbone’
for Trunnions.
Front Hub Bearing Kit (2) RH5027
Per side & includes;
1 of each bearing GHB111 & GHB110 & 1 seal GHS110.
Seal - Hub (2) GHS110
Bearing - Inner Hub (2) GHB111
Wheel Stud only (a/r) 21H5774
NOT A BAD IDEA TO REPLACE THE
Bearing - Outer Hub (2) GHB110 HUB BEARINGS WHEN YOU REPAIR/
‘D’ Washer (2) 102690 OVERHAUL YOUR SUSPENSION.
Nut - Castle Headed (2) LN2211 PHOTO SHOWS 2 (RH5027) HUB
Split Pin (2) PC20 BEARING KITS.
Grease Cap/Cover (2) 102689

FRONT SUSPENSION
Front Spring - NT606041 (2)
GHF221 (6)
FRONT SPRING
GHF202 (2) – SHOCK ABSORBER &
Shock Absorber & 147631 (2)
LOWER WISHBONE
Lower Wishbone 517985 (2) GHF300 (6)
Front Shock Absorber (Inc standard bushes); 517985P (2) NOTE: ITEMS MARKED
Standard (Supplied in singles) (2) GSA366 IN THIS ILLUSTRATION ARE PART
122137 (2) OF TRUNNION KIT 514191
Spax Adjustable (Supplied in pairs);
Ride Adjustable (1pr) GSA366S
517985 (2)
Ride/Height Adjustable (1pr) GSA366SA
Koni Adjustable (1pr) GSA366K 517985P (2) 208056
Ride adjustable.
Gaz Adjustable 147631 (2)
Ride Adjustable (1pr) GSA366G
Ride/Height Adjustable (1pr) GSA366GA 130758 (2)
GHF223 (4) 119451 (4)
Bush only (Shock absorber lower); 119451P (4)
Polyurethane Material (2)119450POLY 119450 (2)
GHF302 (4) 119450P (2)
Bolt (Shock absorber lower to wishbone) (2) BH607201 GSA366
Nut (for bolt BH607201) (2) GHF224
Washer (for bolt BH607201) (2) WD600071 130757 (2)
Front Road Spring; 122534 (2)
GHF223 (4)
Standard (2) 208056 140895 (2)
140892 (2)
Uprated (2) 208056UR 125733 (2)
Spring Compressor Tool (1) RX1328A
See photo. 140894(2)
Bush (Shock absorber - upper);
Standard Material (4) 517985 122022
Polyurethane Material (4)517985POLY GHF224 (2)
Retainer - Bush (4) 147631 WD600071
Spring Seat/Top Plate (2) 122137
Nut (Spring seat retaining) (6) GHF221 GHF224 (2)
Washer (for nut GHF221) (6) GHF300 BH606201 206685 WD600071
140895 (2)
Lower Wishbone & Standard Bush; 206686 140919
Right hand (1) 206685 140920
140894 (2)
Left hand (1) 206686 140893 (2)
140892 (2)
Lower Inner Suspension Overhaul Kit;
Not illustrated. Kit is per side & includes; BH607201 (2) BH607201 (2)
122534 (2)
2 bushes (119451), 2 bolts (BH606201) & 2 nuts (GHF223).
Standard Material (2) RG1193
Polyurethane Material (2)RG1193POLY
TRUNNIONS
Bush Only (Inner - Lower suspension arm); POSSIBLY THE HARDEST
Standard Material (4) 119451 WORKING PARTS
Polyurethane Material (4)119451POLY OF THE FRONT
SUSPENSION
Strut (Wishbone bracing) (2) 125733
Bolt (Rear mounting bracket/wishbone) (4) BH606201
Nut - Nyloc (for bolt BH606201) (4) GHF223
Mounting Bracket (Wishbone);
Front (2) 130757
Rear (2) 130758
Shim (Adjusting) (Use as required) (a/r) 122022
Nut (to mounting bracket) (4) GHF223
Washer (for nut GHF223) (4) GHF302
Trunnion Bush Kit (Per side); (2) 514191

Includes items marked in illustration:
1 spacer (140983), 2 bushes (140892), 2 inner shields (140894), Trunnion Overhaul Kit (Per car) (1) RG1192
2 seals (122534), & 2 outer shields (140985). Not illustrated. See Photo.
Kit is per car & Includes 1 of each of the following kits;
Trunnion Overhaul Kit (Per side) RG1190 (Rh) & RG1191 (Lh).
Not illustrated. Includes either 1 Rh or 1 Lh trunnion, Lower Trunnion;
Plus: 1 bolt (119142), 1 nut (GHF224),1 washer (WD600071), Right hand (1) 140919
1 seal (122126), & 1 bush kit (514191).
Left hand (1) 140920
Right hand (1) RG1190
Seal (Trunnion to vertical link) (2) 122126
Left hand (1) RG1191 Not illustrated. See ‘Front Hub & Upper Wishbone’.
Bolt (Trunnion to wishbone) (2) BH607201
Nut (for bolt 1BH607201) (2) GHF224
Washer (for nut GHF224) (2) WD600071
Tube/Spacer* (for trunnion) (2) 140893
Shield - Outer* (for trunnion) (4) 140895
Seal* (for trunnion) (4) 122534
Bearing (Nylon)* (for trunnion) (4) 140892
Shield - Inner* (for trunnion) (4) 140894
*Items marked are part of trunnion bush kit 514191.
ROAD SPRING
COMPRESSOR TOOL -
RX1328A

SUSPENSION - OVERHAUL KITS
Give Your Front Suspension a Lift
with one of our money saving suspension
OVERHAUL KITS
WHETHER YOU REQUIRE SUSPENSION PARTS FOR A MINOR REPAIR, OR YOU ARE PROPOSING A MAJOR FRONT SUSPENSION/HUB
OVERHAUL/REBUILD, HERE WE HAVE A SELECTION OF KITS THAT WILL ENABLE YOU TO IDENTIFY AND ORDER THE PRECISE AND
CORRECT PARTS YOU NEED WITH THE MINIMUM OF FUSS - AND SAVE MONEY!
UPPER UPRATED FRONT COMPLETE

SUSPENSION ANTI-ROLL BAR TRUNNION
Overhaul Kit Overhaul Kit Overhaul Kit
with Standard Bushes For vehicles fitted with our
conversion kit only.
RG1192
1 kit required per Vehicle
RH5080
2 kits required per Vehicle
When fitted with std bar refer to listings. This kit contains the following parts:
1 ‘Right Hand’ Overhaul Kit RG1190
with Standard Bushes This kit also contains 1 bush kit 514191.
with Polyurethane Bushes 1 ‘Left Hand’ Overhaul Kit RG1191
RH5080POLY RL1286
1kit required per Vehicle
This kit also contains 1 bush kit 514191.
2 kits required per Vehicle TRUNNION BUSH KIT

with Polyurethane Bushes
514191
One kit contains the following parts:
1 Ball Joint GSJ155
RL1286POLY 1 kit required per Vehicle
1 Nut (for ball joint) GHF224 This kit contains the following parts: 1 Spacer 140893
1 Washer (for ball joint) WD600071 1 Link (Rh) 125481 2 Bushes 140892
2 Bushes (Wishbone) 119451 1 Link (Lh) 125482 2 Inner Shields 140894
Standard or Polyurethane depending on which kit is ordered. 2 Seals 122534
2 Bolts (Wishbone rear) BH606181 2 Nyloc Nuts (for links) GHF224 2 Outer Shields 140894
2 Nuts (for bolt BH606181) GHF223 2 Washer (for nuts GHF224) WA600071
2 Bushes (Mounting bushes 155310
2 Bolts (Wishbone front) BH605181 Standard or Polyurethane depending on which kit is ordered. TRUNNION OVERHAUL KIT
2 Nuts (for bolt BH605181) GHF222
2 Washer (for bolt BH605181) GHF332
2
2
Clamps (for bushes 155310)
‘U’ Bolts (for clamps 155308)
155308
155307
Right Hand
4 Nyloc Nuts (for ‘U’ bolts 155307) GHF222 RG1190
4 Washer (for nuts GHF222) GHF332
2 Studs (Link to bar) 125074 This kit contains the following parts:
LOWER (INNER) 2
2
Nuts (for studs 125074)
Washer (for nuts GHF223)
GHF223
WA600071
1
1
Right Hand Trunnion
Bolt
140919
119142
SUSPENSION 2 Washer (for studs 125074) GHF333

1
1
1
Nut
Washer
Seal
GHF224
WD600071
122126
Overhaul Kit 1 Bush Kit 514191
with Standard Bushes FRONT WHEEL TRUNNION OVERHAUL KIT
RG1193
2 kits required per Vehicle BEARING KIT Left Hand
with Polyurethane Bushes RH5027 RG1191
RG1193POLY2 kits required per Vehicle
This kit contains the following parts:
1 Left Hand Trunnion 140920
One kit contains the following parts: 1 Inner Bearing GHB111
1 Bolt 119142
2 Bushes (Wishbone) 119451 1 Outer Bearing GHB110
1 Nut GHF224
Standard or Polyurethane depending on which kit is ordered. 1 Hub Seal GHS110
2 Bolts (Wishbone rear) BH606201 1 Washer WD600071
Don’t forget to check these other parts for wear;
2 Nuts (for bolt BH606201) GHF223 ‘D’ Washer (102690), Nut (LN2211), Split Pin (PC20). 1 Seal 122126
1 Bush Kit 514191
SAFETY
FIRST
In this section we listed
BUSH & BOLT KITS - Car Set
the parts which we
believe to be most prone
BUSH KIT - CAR SET BOLT KIT - CAR SET
Includes all bushes for suspension (front & rear) Includes all bolts, setscrews, nuts & washers
to deterioration. However,
it is not a finite list. It is and mountings for steering rack, anti-roll bar and to install Bush Kit RH5361.
extremely important differential.
Bolt Kit
when working on the with Standard Bushes
suspension that you RH5362
check & verify the
condition of all related
RH5361
parts & components, and with Polyurethane Bushes
replace as a matter of
course if suspect. RH5361POLY
SUSPENSION - UPRATED PACKAGES

UPRATED UPRATED
SHOCK ABSORBER SHOCK ABSORBER & FRONT SPRING PACKAGES
PACKAGES
Spax Adjustable (Car set);
Ride Adjustable (1) RL1358
Packs include 4 adjustable shock absorbers with
standard bushes.
Spax Suspension Kit;

Ride adjustable (1) RH5352
Packs include 2 uprated front springs, 4 adjustable shock Koni Suspension Kit (1) RH5352K
absorbers with standard bushes. Packs include 2 uprated front springs, 4 adjustable shock
absorbers with standard bushes.
GAZ Suspension Kit;

Ride adjustable (1) RH5352GAZ
Packs include 2 uprated front springs, 4 adjustable shock
Spax Ride/Height Adjustable (1) RH5352SA absorbers with standard bushes.
Packs include 2 uprated front springs, 2 front ride/height Ride/height adjustable (1)RH5352SAGAZ
adjustable shock absorbers and 2 rear adjustable shock Packs include 2 uprated front springs, 2 front ride/height
absorbers, all with standard bushes. adjustable shock absorbers and 2 rear adjustable shock
Spax Ride/Height Adjustable (Car set) absorbers, all with standard bushes.
(1) RL1358SA
Packs include 2 front ride/height adjustable
shock absorbers and 2 rear adjustable shock absorbers,
all with standard bushes.
TECH SPEC REAR SUSPENSION
LOWERING BLOCK
ADJUSTABLE Do you want to lower the rear suspension slightly
(ON CAR) to improve handling or match the ride height of
28 point adjustment, dyno tested. Handbuilt, the front suspension if you have fitted adjustable
matching units. Designed and developed by ride height front shock absorbers?
Motorsports Engineers. 2 year warranty. The simple solution is to install a stepped (alloy)
block that sits on top of the differential which in
ADJUSTABLE turn raises the centre of the rear spring.
(OFF CAR) This lowers the car by
1/2", 3/4" or 1"
Specifically designed for each
application. Individually tested until optimum depending
in handling and comfort is reached. on your
Will usually outlive your car. requirements.
Koni Ride Adjustable (Car set) (1) RL1359 ADJUSTABLE
Packs include 4 adjustable shock absorbers with
standard bushes. (ON CAR)
36 point fine tune settings. Rear Spring Lowering Block;
Zinc plated bodies. 1/2" Lower (1) RH5371
Double lip seal + O’ ring on piston rod. Ideal for all cars.
Fully rebuildable. Top quality. 3/4" Lower (1) RH5372
Use with lowered front suspension.
Each unit tested and supplied with individual
dyno read-out. 3 year warranty. British made. 1" Lower (1) RH5373
For track or special applications.
Gaz Ride Adjustable (Car set) (1) RL1358GAZ

Packs include 4 adjustable shock absorbers
with standard bushes.
Gaz Ride/Height Adjustable (Car set)
(1) RL1358SAGAZ
Packs include 2 front ride/height adjustable shock
absorbers and 2 rear adjustable shock absorbers,
all with standard bushes.

REAR SUSPENSION
128352 GHF223 (6) REAR SUSPENSION
WB110061 (6)
C8939A (2)
SEE LISTING GHF275 (2)
FOR DETAILS
118599 (2) WA112081 (2)
102987 (8)
131008 (6)
GDA4011 WD600071 (2)
BH607281 (2)
GHF224 (2)
GHF223 (2)
GHF224 (2)
GHF302 (4) GHF302 (2)
GHF223 (4)
132912
BH606181 (2)
BH606261 (4)
WM69 (2)
119451 (4) WD600071 (2)
118825 (a/r) GHF224 (2)
BH607281 (2) GHF302 (2) 132763 RH
151966 RH WD600071 (2)
151967 LH BH606181 (2) GHF223 (2) 132764 LH
Rear Suspension
Road Spring; Mounting Bracket - Radius Arm;
Saloon & Convertible (all models) (1) 305945 Right Hand (1) 151966
Coupe (1) 303274 Left Hand (1) 151967
Estate (1) 304860 Bolt - Radius Arm to bracket (2) BH606181
Lowering Block - see panel Washer - Flat (2) GHF302
Bush - Spring Eye; Nut - Nyloc (2) GHF223
Standard (2) C8939A Bolt - Bracket to Outrigger (4) BH606261
Polyurethane (2) C8939APOLY Shim (a/r) 118825
Stud - Spring Locating (6) 131008 Washer - Flat (4) GHF302
Top Retaining Plate (1) 128352 Nut - Nyloc (4) GHF223
Washer - Flat (6) WB110061 Washer - Flat (Lower shock mount) (2) WM69
Nut - Nyloc (6) GHF223 Nut (lower shock mount) (2) GHF224
Bolt (spring to vertical link) (2) BH607281
Washer - Flat (2) WD600071
Nut - Nyloc (2) GHF224
Vertical Link; REAR SUSPENSION
Right Hand
Left Hand
(1)
(1)
132763
132764
LOWERING BLOCK
Do you want to lower the rear suspension slightly
Bolt (vertical link to inner hub) (2) BH607281
to improve handling or match the ride height of
Washer - Flat (4) WD600071
the front suspension if you have fitted adjustable
ride height front shock absorbers?
Bolt - Radius Arm (2) BH606181
The simple solution is to install a stepped (alloy)
Washer - Flat (2) GHF302
block that sits on top of the differential which in
turn raises the centre of the rear spring.
Rear Shock Absorber;
This lowers the car by
Standard (each) (2) GDA4011 1/2", 3/4" or 1"
SPAX (1 pair boxed) (1) GDA4011SPAX
depending
KONI (1 pair boxed) (1) GDA4011KONI
on your
GAZ (1 pair boxed) (1) GDA4011GAZ
requirements.
Bolt (Shock to spring) (2) 118599
Bush (shock eye);
Standard (each) (8) 102987
Polyurethane (pair) (4) 102987POLY
Washer - Flat (2) WA112081 Rear Spring Lowering Block;
Nut - Nyloc (2) GHF275 1/2" Lower (1) RH5371
Radius Arm (2) 132912 Ideal for all cars.
Bush - Radius Arm; 3/4" Lower (1) RH5372
Use with lowered front suspension.
Standard (4) 119451 1" Lower (1) RH5373
Polyurethane (4) 119451POLY For track or special applications.

ROAD WHEELS
MINILITE REPLICA ALLOY ROAD WHEELS REVOLUTION ALLOY
ROAD WHEELS
MINILITE REPLICA Minilite ‘Replica’ Wheel Kit;

WHEELS Includes 4 wheels, 4 centres and 16 wheel nuts.
13”x 5J (1) RL1473
REVOLUTION
These superb (lightweight) aluminium
replicas of the original magnesium
13”x 5.5J (1) RL1473/5.5 ALLOY WHEELS
Wheel Only; Set your Herald different from the crowd
Minilite (used for rallying), are now 13”x 5J (4) RL1470 with Revolution Alloy Wheels.
available - in silver only - at an extremely 13”x 5.5J (4) RL1470/5.5 Beautifully finished with Alloy rims and
attractive price, and they make a very Wheel Centre only; black spokes.
interesting alternative to steel and wire Plastic (4) RL1472P Fit as direct replacements to standard
wheels. Alloy (4) RL1472A
wheels using special wheel nuts.
These bolt-on wheels are a direct Wheel Centre Triumph
replacement when used with the Badge only (stick on) (4) RL1472BADGE Revolution Wheel Kit;
Wheel Nut only (16) RL1471 Includes 4 wheels, 4 centres and 16 wheel nuts.
corresponding wheel nuts. 13”x 5.5J (1) RL1643
Autoglym ‘Clean Wheels’ (500ml) (1) RX1322
Wheel only (13”x 5.5J) (inc. centre) (4) RL1641
Wheel Centre only (4) RL1644
WIRE WHEELS (All Models) Wheel Nut only (16) RL1642
Autoglym ‘Clean Wheels’ (500ml) (1) RX1322
WIRE WHEELS STEEL ROAD

Look at our prices, our
wheel sets include 5 wheels!
If you prefer your Herald to
WHEEL & TRIMS
look that little bit different, STANDARD WHEEL
why not consider fitting a set SEE LISTINGS
of our wire wheels, they
are available in chrome,
or painted silver.
113087
122806
IMPORTANT INFORMATION
Wire Wheels
When fitting Wire Wheels YOU MUST check the length of the Standard Road Wheel;
wheel studs (and shorten if necessary) to ensure they do not Saloon 3.5J recon (4) 307401R
foul the wheels. REPLACEMENT WIRE WHEEL COMPONENTS Estate 4.5J recon (4) 307405R
Please read the full fitting instructions supplied, carefully. Wire Wheel only; Wheel Nut (16) 113087
13”x4.5J - Hub Cap (4) 122806
Wire Wheel Conversion Kit - 13”x4.5J; Chrome (5) XW466C Wheel Trim;
Kits inc; 5 wheels, 4 splines, 4 two eared centre knock caps*, Painted (5) XW466S Factory option (with slots) (4) 307583
16 retaining nuts,1 cleaning brush, 1 hammer and instructions
13”x5.5J - Chrome (5) XW5729C 13/60 only (with holes) (4) 214771
Chrome Wheels (1) RL1221/4.5 Hub Adaptor/Spline (Bolt-on); Foot Pump (1) GAT347
Painted Wheels (1) RL1201 Right hand (2) RSSPR Wheel Nut Brace (1) 21A2818
*Wheel kits available with alternative octagonal Scissor Jack & Handle (1) 311346
centre lock nuts.
Left hand (2) RSSPL
NOTE: ‘Eared’ centre caps not allowed in some countries. Retainer Nuts (Hub adaptor to spline) (16) RSRN38 Tool Bag (for jack) (1) 725793
Please state preference when ordering. ‘Eared’ Centre Knock Cap; Tool Pouch (1) RH5214
Wire Wheel Conversion Kit - 13”x5.5J; NOTE: ‘Eared’ centre caps not allowed in some countries.
This kit gives you the option to fit wider section tyres that
‘fill the arches’. Care should be taken in selecting the correct
2 Eared
Right hand (2) KC4282R
MUDFLAPS
tyre width to avoid any clearance problems. Left hand (2) KC4282L
Kit includes; 5 wheels, 4 splines, 4 two eared centre knock caps*, 3 Eared
16 retaining nuts, 1 cleaning brush, 1 hammer and instructions
Right hand (2) KC4282R-3
Chrome Wheels (1) RL1221/5.5 Left hand (2) KC4282L-3
NOTE: ‘Eared’ centre caps not allowed in some countries.
*Kit available with alternative octagonal centre lock nuts.
Please state preference when ordering. ‘Octagonal’ Centre Lock Nut;
Alternative to ‘Eared’ centre caps.
Right hand (2) KC4280R
Left hand (2) KC4280L
OPTIONAL Cleaning Brush (1) KACB101
OCTAGONAL Copper & Hide Hammer (1) KACH100 Mudflaps (Pair)
CENTRE LOCK Spanner (for ‘Octagonal’ centre nuts) (1) KAS42 Front (Inc. fittings) RH5193F
NUTS Rear (Inc. fittings) RH5193R
DESCRIPTION QTY REQ. PART No. DESCRIPTION QTY REQ. PART No.
BRAKE SYSTEM
DISC BRAKE
DRUMS OR DISCS! CONVERSION KIT
When were Discs fitted?

The early Heralds (1200, 12/50’s) were all
equipped with Drum Brakes from the factory,
however, as technology progressed in the
development of the Disc Brake (brought about by
racing), then demand grew for this new type of
braking system. To cater for the growing
requests, the Factory offered the public two
solutions;
1) Disc Brakes were offered as a ‘Factory Fitted
Option’ (from approx’ 1963 to 1967) when
ordering a new Herald.
2) You could order a Factory ‘Disc Conversion
Kit’ and have it fitted by the local Triumph
agent. Eventually, (from approx’ 1967) Disc
Brakes were fitted as standard on late Herald
1200’s & 12/50’s, and all 13/60’s, so trying to
Front Drum Brakes DISC BRAKE
determine the changes by chassis number
can be a bit of a problem.
EARLY 1200 & 12/50
VEHICLES FITTED WITH DRUM BRAKES
CONVERSION KIT
How to identify Brake Drum (2) 203077 RH5029
When the Factory offered Discs as an Option on Screw- Drum Retaining (4) V5435 Our kit includes; 2 Stub Axles (UKC697),
early Heralds, they did this by fitting an adaptor Back Plate; 2 Nuts (GHF275), 2 Washers (WC112081),
plate to carry the Caliper, this bolted to the Right Hand (1) 506712 2 Castle Headed Nuts (LN2212),
Vertical Link (209222/209223), and they Left Hand (1) 506713 2 ‘D’ Washers (102690), 2 Split Pins (PC20),
increased the length of the bolts which held the Brake Adjusting Cam (4) 105667 2 Vertical Links (GSJ265/GSJ266),
backplate. The adaptor has 2 (drilled) lugs (to the Spindle (for adjusting cam) (4) 120114 2 Tie Rods (211048/ 211049),
front) which located the Caliper. 4 Bolts (138558 - Link to Tie Rod),
Brake Shoes (axle set) (1) GBS710
The later models (Discs fitted as standard 4 Washers (WQ310 for ‘138558’),
Wheel Cylinder; 2 Front Hubs (146479), 8 Wheel Studs (21H5774),
equipment) were produced with modified Right hand (2) GWC201
Vertical Links, with only 3 drillings, 2 for the 2 Hub Bearing Kits (RH5027),
Left Hand (2) GWC202 2 Brake Discs (208715),
Caliper, and 1 for the Steering Tie Rod, and fitted Gasket (cylinder to back plate) (4) 120129 8 Bolts (113150 - Disc to Hub),
with Brake Dust Shields. Wheel Cylinder Repair Kit (4) 8G4153 8 Spring Washers (GHF333 for 113150),
Can I convert? Bolt - Cylinder Retaining (8) SH604041 2 Calipers (159130/159131),
If you wish to convert your early Herald from Washer - Locking (8) GHF321 4 Bolts (132439 - Caliper Mounting),
Drum to Disc, or even from the early type of Disc Spring - Brake Shoe Return (4) 504875 4 Washers (WQ310 for 132439),
brake caliper system to the latest type, the Bleed Screw (4) 556508A 2 Brake Dust Shields (213680/213681),
easiest method is to fit our own ‘Disc Brake Kit’ Brake Shoe Retaining Kit (Axle set) (1) RH5079 2 Extension Covers (149623),
(Part Number RH5029). The kit briefly comprises; Includes 4 pins, 4 springs & 8 cup washers. 1 Disc Pad Kit (RH5074), 2 Bleed Screws (601959),
2 stub axles, 2 vertical links, 2 hubs, 2 discs + Pin - Shoe Retaining (4) 120124 1 Brake Pipe Kit (RH5165),
pads, bearings and fittings. Spring (for 120124) (4) 504877 2 Flexible Brake Hoses (GBH216),
For detailed kit information please refer to Disc 1 Four-Way Connector (136939),
Cup Washer (for 120124) (8) 17H4374
1 Bolt (BH604101 for 136939),
Brake Conversion Kit. Front Brake Hose; 1 Nut (GHF200 for 136939),
Further Enhancements Standard (2) GBH201 1 Plain Washer (GHF300),
Stainless Braided (2) GBH201GR 1 Locking Washer (GHF331),
To really improve stopping power for today’s
roads, consider fitting a Remote Mounted Brake 2 Rear Wheel Cylinders (GWC1208),
Servo Kit (RH5272). Discs only. 1 Brake Light Switch (134529),
506712 RH and 1 Litre of Silicone Brake Fluid (RS1454).
506713 LH
120124
504875 8G4153
GBS710
203077
GWC201 RH
120114 105667 GWC202 LH
504877
556508A
504877 17H4314
SH604041 120129
120124 504875
105667
120114 504877
GWC201 RH
GWC202 LH 17H4314
V5435
8G4153
FRONT DRUM BRAKES

BRAKE SYSTEM
511034 (1)
Front Disc Brakes (Early)
Type 12 Calipers
STC1913 (2)
601959 (2)
GBP166
GBP166K
GBP166GS } CALIPER REPAIR KIT
PER CAR
VEHICLES FITTED WITH DISC BRAKES 210989 (RH)

Type 12 Calipers 210988 (LH)
NOTE: This type of caliper can easily be identified by the
presence of an adaptor plate (to carry the caliper) which bolts
to the vertical link and also by the absence of a brake dust
shield. 511031 (4)
Early 1200 from GA29284 to GA46959 (1963 to '67) 12/50 208715 (2)
from GA46960 to GA1272380 (1963 to '67) & vehicles
converted to disc from drum using (only) the factory 511032 (4)
conversion.
512067 (4)
Brake Kits (Front); PISTON
Disc & Pad set (2 discs & pads)
Standard Discs & Pads (1) RL1525 GHF333 (8)
Uprated Discs & Pads
EBC Discs (1) RL1525UR 113150 (8) FRONT DISC BRAKES - EARLY
Rossini Discs (1) RL1525ROS TYPE 12 CALIPERS
Brake Disc;
Standard (Each)
EBC (Pair)
Rossini (Pair)
(2) 208715
(1) 208715UR
(1) 208715ROS
EBC BRAKES
Bolt (Disc to Hub) (8) 113150
Washer - Spring (8) GHF333
Brake Pads (car set);
Standard (1) GBP166
Standard with fitting kit (1) GBP166K
Uprated Green Stuff EBC (1) GBP166GS
Pads Fitting Kit (1) GBK5914
Inc. shims, pins & clips.
Pads Pin & Clip Kit (1) GBK1001
Inc. 4 pins & 4 clips.
Pads Retaining Pin (each) (4) 511031
Pads Clip (retaining pin) (each) (4) 511032
Caliper;
Right hand
Left hand
(1)
(1)
210989
210988
EBC BRAKE DISCS
Caliper Repair Kit (for 2 calipers) (1) 511034 EBC turbo groove discs are handed
STANDARD FRONT BRAKE KIT - RL1525 (lh & rh) with curved grooves and dimples
Caliper Piston (4) 512067 to offer superb stopping power when
Front - Brake Hose (all models with Type 12); combined with ‘Green Stuff’ Kevlar pads.
Standard (2) GBH216
Stainless Braided (2) GBH216GR
Bleed Screw (2) 601959
Dust Cap (bleed screw) (2) STC1913
Caliper Mounting Plate;
Right hand (1) 201892
Bolt (Caliper mounting) (4) 132439
Washer - Spring (Caliper bolt) (4) WL600071
UPRATED
EBC DISCS &
GREENSTUFF
PADS -
RL1525UR
ROSSINI BRAKE DISCS

Rossini performance drilled and grooved
discs are made from the best compounds
with carbon & added manganese,
‘GREEN STUFF’ molybdenum & titanium. The drillings cool
BRAKE PADS - the disc to reduce brake fade.
EBC KEVLAR GBP166GS The grooves reduce pad glazing and
increase grip. The embedded Rossini logo
on the disc face lets you know when they
need replacing. Can be used with standard
or ‘Green Stuff’ Kevlar Pads.
UPRATED
ROSSINI DISCS
& GREENSTUFF
PADS -
RL1525ROS
PAD FITTING KIT -

GBK5914

BRAKE SYSTEM
STANDARD FRONT BRAKE KIT - RL1080 UPRATED EBC DISCS UPRATED ROSSINI DISCS
& GREENSTUFF PADS - RL1080UR & GREENSTUFF PADS -
RL1080ROS
Front Disc Brakes (Late)

Type 14 Calipers
VEHICLES FITTED WITH DISC BRAKES Bolt (disc to hub) (8) 113150 Dust Cap - Bleed Screw (2) STC1913
Type 14 Calipers Washer - Spring (8) GHF333 Bleed Screw (2) 601959
NOTE; This caliper type is easily identified as it is mounted Brake Pads (car set); Front- Brake Hose (all models with Type 14);
directly on to the vertical link and by the fitting of brake Standard (1) GBP574 Standard (2) GBH216
dust shields Original factory specification late 1200 & 12/50 Standard with Fitting Kit (1) GBP574K Stainless braided (2) GBH216GR
from 1967 onwards and all 13/60 Models. Bolt (Caliper Mounting) (4) 132439
Uprated EBC Green Stuff (1) GBP574GS
Pads Fitting Kit (1) GBK5914 Washer - Spring (Caliper Bolt) (4) WL600071
Brake Kits (Front); Inc. shims, pins & clips. Dust Shield;
Disc & pad set (2 discs & pads)
Pads Pin & Clip Kit (1) GBK1001 Right hand (1) 213680
Standard Discs & Pads (1) RL1080 Inc. 4 pins & 4 clips. Left hand (1) 213681
Uprated Discs & Pads Pads Retaining Pin (each) (4) 511031 Extension Cover (dust shield) (2) 149623
EBC Discs (1) RL1080UR Pads Clip (retaining pin) (each) (4) 511032 Brake Fluid;
Rossini Discs (1) RL1080ROS Caliper; Dot 3 (1 Litre) (a/r) GBF103
Brake Disc; Right hand (1) 159130 Silicone
Standard (each) (2) 208715 Left hand (1) 159131
0.5 litre (a/r) RX1327
EBC (pair) (1) 208715UR Caliper Repair Kit (for 2 calipers) (1) 520957
1 Litre (a/r) RX1326
Rossini (pair) (1) 208715ROS Caliper Piston (4) 516212
BRAKE PAD SET - GBP574, GBP574GS BRAKE PAD BRAKE PAD KIT - GBP574K
FITTING KIT INC. FITTING KIT
GBK5914
PIN & CLIP

ALL MODELS
GBK1001
132439 (4)
BOLT (CALIPER MOUNTING)
149623 (2) STC1913

EXTENSION (DUST SHIELD) DUST CAP 601959
BLEED SCREW
213680 (RH)
213681 (LH)
DUST SHIELD
511031 (4)
511032 (4)
WL600071 (4) 159130 (RH)

159131 (LH)
CALIPER
113150 (8)
BOLT - DISC
TO HUB
GHF333 (8)
516212 (4)
PISTON
520957 (1)
CALIPER REPAIR
KIT (PER CAR)
208715 (2) STANDARD
PADS
INCLUDING
FRONT DISC BRAKES & FITTINGS FITTING KIT -
GBP574K
TYPE 14 CALIPERS
BRAKE SYSTEM
Rear Brakes REAR BRAKES
Brake Shoe Axle Set; 120139 (2)
Standard (1) GBS749 120138 (2) 519758 (2)
with Competition Linings (1) GBS749UR REPAIR KIT
PC34 (2) WHEEL CYLINDER
Brake Drum (each) (2) 201246
REFER TO LISTINGS
Brake Drum-Alfin (pair) (1) 201246UR 131809 (RH)
Increased resistance to fade. 131810 (LH)
Screw-Drum Locating (4) V5435 123135 (2) BRAKE BACK PLATE
Brake Back Plate; GHF200 (4)
Right Hand (1) 131809 WHEEL CYLINDER
REFER TO LISTINGS GBS749
Left Hand (1) 131810
GHF321 (4) PER CAR
Adjuster Assy (2) 519762
Nut (adjuster to back plate) (4) GHF200
Washer (for nut GHF200) (4) GHF321 105689 (2)
Wheel Cylinder; 201246 (2)
948 & 1200 (drums front & rear) (2) GWC1202 105690 (2)
5/8" bore.
1200, 12/50 & 13/60 (front discs)(2) GWC1208
3/4" bore.
120124 (4) 519762 (2)
Wheel Cylinder Repair Kits;
For GWC1202 (2) 18G9004
For GWC1208 (2) 507865
Retaining Plate (2) 120138 GBS749
PER CAR
Wheel cylinder to back plate. 504877 (4)
Retaining Spring (2) 519758
Dust Cover (2) 120139
Bleed Screw (2) 556508A
Spring Upper (double coil) (2) 105689
Spring Lower (single coil) (2) 105690 17H4374 (4)
Pin (Brake shoe retaining) (4) 120124
Spring (for 120124) (4) 504877 IMPORTANT SAFETY NOTICE: V5435 (4)
Cup Washer (for 120124) (4) 17H4374 If you are unsure as to the type/bore of
Brake Shoe Retaining Kit (1) RH5079 wheel cylinders fitted to your vehicle, then
Kit is per axle and contains; 4 pins 4 springs replacement cylinders MUST BE FITTED IN 125217 SH604051 (2)
& 4 cup washers. PAIRS. SH604051(6)
Handbrake Operating Lever (2) 123135 Fitted Disc Brakes/Converted
Split Pin (for123135) (2) PC34 If your vehicle has been converted to disc GHF331 (6)
brakes, or if you are contemplating
Rear Brake Hose; upgrading to disc brakes, then you must
Standard (2) GBH204 506542
ensure that the larger bore cylinders (part
Stainless Braided (2) GBH204GR number GWC1208) are fitted. GHF300 (4)
See our ‘Disc Brake Kit’.
506542
114438 119575
134532
105605
134503
BRAKE PEDAL
‘ALFIN’ FINNED BRAKE DRUMS FOR EXTRA COOLING AND INCREASED

RESISTANCE TO FADE. SUPPLIED IN PAIRS 201246UR.
122289
PAD
BRAKE PEDAL & FITTINGS
(ALL MODELS)
Brake Pedal & Fittings

EVERYTHING YOU NEED TO Brake Pedal (1) 134503
OVERHAUL YOUR REAR Brake Light Switch (on pedal) (1) 134529
BRAKES Brake Pedal Bracket (1) 134532
Pedal/Pad Rubber (1) 122289
Bush (brake pedal) (1) 105605
Spring - Pedal Return (1) 114438
Cross Shaft - Pedal (1) 119575
Circlip (for 119575 shaft) (2) 506542
Setscrew (pedal adjusting) (2) SH604051
Washer - Flat (for SH604051) (4) GHF300
Setscrew (mounting bracket) (6) SH604051
Locates mounting bracket to bulkhead.
Washer - Spring (for SH604051) (6) GHF331
Dust Cover/Boot (1) 125217
Master cyl push rod.

BRAKE SYSTEM
104750
BRAKE SERVO KIT - 104749
RH5272
REMOTE MOUNTING. IMPROVE NQ2707 GHF200
YOUR STOPPING POWER.
(DISC BRAKES ONLY).
GHF300
PC5
131806 131807
127311
PJ8806 121699
121760
121757
134862 131806
121755 GHF301 HANDBRAKE & CABLE
132589
121758 PC10
Handbrake & Cables
Handbrake Lever Assy (1) 132589
104743 Gaiter - Handbrake Lever (1) 705789
Ratchet - Handbrake Lever (1) 148083
121759 Pawl - Handbrake lever (1) 104737
104737
Clevis Pin (cable to handbrake lever) (1) 104750
Cable Fork End (1) 104749
Nut - Square (1) NQ2707
Washer (1) GHF300
NG2707
121766 Split Pin (1) PC5
COPPER BRAKE PIPE KIT
148083 Handbrake Cable;
GHF300 GHF200
Short Cable (1) 121766
104749 Handbrake to relay lever.
Main Cable (1) 127311
Compensator to wheel cylinder.
PC5 104750 Relay Lever (1) 134862
Bush - Relay Lever (1) 121757
Brake Pipe Kit (Copper); Seal - Felt (for 121757) (1) 121760
All pipes are fully made up and the correct Seal - Rubber (for121757) (1) 121755
length for the whole vehicle.
948 & 1200 drum brakes all round Pivot Pin (1) 121759
Shouldered, locates relay lever to body.
RHD (1) RH5140
LHD (1) RH5140LHD Tab Washer (for 121759) (1) 121758
Brake Hydraulics 1200,12/50 early front calipers type 12 Compensator
Handbrake cable equalising lever.
(1) 121699
Brake Master Cylinder; RHD (1) RH5062
LHD (1) RH5062LHD Clevis Pin (1) PJ8806
948 & 1200 (Drum brakes all round) Compensating lever to relay lever.
Original (1) GMC205 1200, 12/50, 13/60 late type 14 calipers Washer (for PJ8806) (1) GHF301
(1) RH5165
Alternative Type (1) GMC205ALT Split Pin (for PJ8806) (1) PC10
Brake Pipe Junction:
1200, 12/50 (1) GMC224 Spring (Handbrake pull off) (2) 131806
Early front calipers type 12. Front 5 way (1) 137075
1200, 12/50, 13/60 (1) GMC220 Front 4 way (1) 565719 “L” Bracket (2) 131807
Late type 14 calipers. Rear 3 way (1) BTB657 Nut (for 131807) (4) GHF200
Repair Kit for Brake Master Cylinder; Bolt (junction mounting) (2) BH604101 Cable Fork End (2) 104749
All models (1) GRK1029 Nut (for BH604101) (2) GHF200 Nut - Square (1) NQ2707
Mounting Bracket (Brake master cylinder); Washer - Plain (for BH604101) (2) WC701121 Clevis Pin (2) 104750
Drum Brakes (1) 119583 Washer - Locking (for BH6040101) (2) GHF331 Washer (for 104750) (4) GHF300
Disc Brakes (1) 146413 Brake Light Switch; Split Pin (for 104750) (2) PC5
Brake Servo Kit (Discs only). (1) RH5272 Fitted in 5 way junction (1) 132569 Operating Lever - Handbrake (2) 123125
Remote mounting (see photo). 948 and 1200 with front drums. Handbrake cable to wheel cylinder (not shown).
Complete kit to really improve your stopping power!
Fitted on Brake Pedal (1) 134529
Front Brake Hose; All other models.
948 & 1200 (drum brakes all round) Connector (male/male) (1) ACB5559
Standard (2) GBH201 Connects main front pipe to main rear pipe.
Stainless braided (2) GBH201GR Brake Pedal Return Spring (1) 114438
1200, 12/50 Pedal Rubber (Brake and clutch) (2) 122289
Early front calipers type 12.
Standard (2) GBH216 SILICONE - DOT5 BRAKE & CLUTCH FLUID
Stainless braided (2) GBH216GR THE FACTS
1200, 12/50, 13/60 Automec Silicone Brake Fluid (SBF) meets the USA Department of
Late front calipers type 14. Transportation Federal Motor Vehicle Safety Standard No 116 for DOT5
brake fluid, which has now been adopted by the UK & Europe.
Standard (2) GBH216 Silicone fluid is used in the same way as normal brake fluid. Drain the
Stainless braided (2) GBH216GR system, fill with Silicone and bleed in accordance with the vehicle
manufacturers instructions.
Rear Brake Hose; Initially the brake fluid remains purple, then after a while it changes to
Standard (2) GBH204 yellow. The colour change is quite normal and does not affect the
performance of the fluid.
Stainless Braided (2) GBH204GR Because Silicone fluid is non-hygroscopic (it absorbs less than 1% by
Brake Hose Sets (Set of 4 hoses - front & rear); weight of moisture), corrosion in the system is virtually eliminated, while
at the same time the boiling point (important under emergency braking
Standard conditions) remains very high at around 260 Centigrade (500F) unlike
948 & 1200 (1) RH5363 normal fluids that can be as low as 170C.
Drum brakes - all round. SBF is non-toxic, virtually inert (it is not glycol based) and is Brake Fluid;
environmentally friendly.
Other Models (1) RH5374 All this means that it wont harm you, your cars braking components, or Dot 3 (1 Litre) (a/r) GBF103
Stainless Steel Braided the paintwork and because you don’t have to drain the system (unlike
normal glycol based fluids), it doesn’t harm the environment. Silicone
948 & 1200 (1) RH5363GR If Automec Silicone Brake Fluid becomes mixed with normal glycol fluid, 0.5 litre (a/r) RX1327
Drum brakes - all round. they will work safely, as they both have to if they are to be classified as
Other Models (1) RH5374GR D.O.T fluids. 1 Litre (a/r) RX1326

STEERING
Steering Rack U CLAMP
REFER TO LISTINGS
& Mountings FAM1718
Steering Rack; 105438
Includes gaiters, less track rod ends. BH605101
948 - RHD (1) 305458
All other models
RHD
REFER TO
Standard (1) 305932 140549 LISTINGS
High Ratio (1) 305932HR GHF272
LHD
Standard (1) 305931
High Ratio (1) 305931HR
Track Rod End (Inc nyloc nut) (2) GSJ158 RTC2219 RH
RTC2218 LH GHF301
Nut (Track rod end to track rod 129961) (2) 128022 STEERING RACK
Rack Gaiter;
Right Hand (1) RTC2219
MOUNTINGS AND GHF222
Left Hand (1) RTC2218 LOWER STEERING 129961
Pair (1) RTC2218-9 SHAFT
Track Rod & Inner Ball Joint (2) 129961 128022
Grease Nipple (1) 56935
Steering Knuckle (1) FAM1718
Rack to column shaft.
Pinch Bolt (1) BH605101 GSJ158
Steering knuckle to rack/shaft.
Nut (for bolt BH605101) (1) GHF272
Steering Column
& Fittings
Outer Column Tube (1) 154177 Clamp - Lower Column Support (1) 608185
End Cap (1) 122718 Felt (upper flat) (1) 608222
Escutcheon/Cover (2) 708479 Felt ("U" shaped lower) (1) 608223
Indicator & Lighting stalks. Column Retaining Plate Seal (1) 613466
Label/Instructions (for covers); Retaining Plate (column) (1) 601597
Indicators (1) 611011 Screw Seal Retaining (2) YZ3405
Lighting (1) 611013 Spire Nut (for YZ3405) (2) GHF701
Clip-Turn Signal Cancelling (1) 140549 Bolt (for clamp 608185) (2) GHF117
Slip Ring/Insulator (1) 608462 Washer - Plain (2) GHF300
STEERING RACK Horn Push (1) 150277
SOLID MOUNTING KIT - RR1370 Washer - Locking (2) GHF332
Clip (horn push) (1) 204741 Nut (2) GHF200
"Pencil" Connector (horn push) (1) 142534 Steering Column Lock (1) 2190611
RACK MOUNTING
948 & Early 1200 (to GA80000) Bearings - Column (upper & lower) (2) 209423 Late 13/60 models only.
Mounting Block (2) 122552 Spring Clip (upper column support) (1) 609639 Shear Bolt (2) 152597
Ring Clamp (2) 122553
"U" Bolt (2) 122554 STEERING COLUMN 608222 510273 708479
Nut - Nyloc (4) GHF222 609639 FC2803
All other models SH604061 154177
Rubber Mounting (Rack to body); GHF701 209423
Standard (2) 139386
Polyurethane (2) 139386POLY
Reinforcing Plate (2) 133875
"U" Bolt/Clamp (2) 156024 209423
Nut - Nyloc (for "U" bolt 156024) (4) GHF222 608223 608462
Washer - Plain (for "U" bolt 156024) (4) GHF301
Solid Mounting Kit Uprated (1) RR1370 601597 708479
See photo. Replaces original rubber mountings and clamps. WP41
613466 YZ3405
Solid aluminium blocks clamp rack body to chassis using ‘U’ GH301
bolts. Provides more positive feel to steering. GHF200
Note: also transmits more road noise and vibration.

STEERING
Steering Wheel
MOTO-LITA
MOTO-LITA
WOOD RIMMED 14" FLAT
& Fittings
WOOD RIMMED 13" FLAT RR1170/14
RR1170/13 "Moto-Lita" Sports Steering Wheel;
Inc. boss and fittings.
Wood Rimmed 13" Flat (1) RR1170/13
Wood Rimmed 14" Flat (1) RR1170/14
Leather Rimmed 13" Flat (1) RR1173/13
Leather Rimmed 14" Flat (1) RR1173/14
"Mountney" Sports Steering Wheel & Boss;
13" Wood Rimmed
Semi-dished (1) RL1466
14" Vinyl Rimmed Dished
with Polished Spokes (1) RH5357
with Black Spokes (1) RH5358
Nut - Steering Wheel Securing (1) 105438
MOTO-LITA MOUNTNEY
MOTO-LITA LEATHER 14" FLAT WOOD RIMMED
LEATHER 13" FLAT RR1173/14 13" SEMI-DISHED
RR1173/13 RL1466
MOUNTNEY
VINYL RIMMED MOUNTNEY
14" DISHED VINYL RIMMED
POLISHED SPOKES 14" DISHED
RH5357 BLACK SPOKES
RH5358

ELECTRICAL
Engine Electrics – UPRATED HI-TORQUE Engine Electrics –
Major Units STARTER MOTOR Ignition System
ALTERNATOR – DYNAMO – STARTER Engine Service Kit;
Starter Motor; Inc. plugs, points, condenser, fan belt, air filter & oil filter.
Reconditioned (Exchange) (1) GEU9405 948 (1) RH5350
Uprated Hi-Torque (see photo) (1) GEU9405UR 1200, 12/50 (1) RH5078
Solenoid (standard starter motor) (1) 134174 13/60 (1) RH5104
Brush Set (starter) (1) GSB105 Distributor (exchange);
1200 (1) 215046R
ALTERNATOR CONVERSION 12/50 (1) 215046R
KIT - RH5067 13/60 (1) 212292R
Distributor Cap;
Side Entry Type (1) GDC114
Top Entry Type (1) GDC103
Vacuum Unit (1) RTC1425
Contact Breaker Points (1) GCS101
Rotor Arm (1) GRA101
Condenser (1) GSC111
Terminal-Bush & Lead (1) 600329A
Spark Plugs;
Fits as direct replacement. 948,1200, 12/50
Starts engine regardless of compression or Standard (4) GSP4366
temperature. Up to 200% more cranking power Double Core (4) GSP4366HP
using up to 50% less current. 13/60
Standard (4) GSP4362
Alternator Conversion Kit (1) RH5067 Uprated Hi-Torque Starter motor (1) GEU9405UR Double Core (4) GSP6462
All models. Outright sale, no exchange.
Our alternator conversion kit, which is suitable for all Herald Plug Lead Set Side Entry Type (1) RH5096
1200, 12/50 & 13/60 models, comes complete with all Plug Lead Set Top Entry Type;
necessary fittings.
NOTE; vehicles must be (or converted to) negative earth. ELECTRONIC Standard (1) GHT146
IGNITION KIT Silicone (1) GHT146S
Alternator Conversion Plug Kit (1) GEU250 Kit offers maintenance Ignition Coil;
Dynamo (Exchange, less pulley and fan) (1) GXE3101 free ignition system Standard (1) GCL110
(in place of contact
Control Box (1) GEU6603 points) with improved Lucas 12 Volt (1) GCL110LUCAS
Brush Set (Dynamo) (1) GGB102 performance and fuel Performance (1) GCL110HP
Pulley (Dynamo) (1) 147906 economy.
Electronic Ignition;
Fan (Dynamo) (1) 147333 Lumenition
Bracket (Fan belt adjustment) (1) 121215 Standard (1) RR1113
Bolt (for 121215) (1) GHF120 Performance (inc special coil) (1) RR1113P
Washer – Flat (1) RTC610A Newtronic
Bracket (Dynamo mounting to block) (1) 104890 Negative Earth (1) RF4101
Bolt (for 104890) (1) GHF120 Positive Earth (1) RF4101P
Washer – Spring (1) GHF332
Pedestal (adjusting) (1) 104902
Nut – nyloc (for 104902) (1) GHF275
Bolt (for 104890) (1) BH605101
Washer – Plain (2) GHF301
Nut – Nyloc (1) GHF272
Washer – Spring (1) GHF332
Fan Belt;
All except 13/60 (1) GCB11038
13/60 (1) GCB11025
Windscreen
Wiper/Washer System
Wiper Motor Assy (less gear) (1) GXE7714
Wiper Rack (1) RTC202A
Wiper Box;
Vehicles up to 1969 (2) RH5103
Vehicles from 1969 (2) 122781
Nut (wiper box) (2) 520205
Wiper Blade (2) GWB112
Wiper Arm (2) 130034
Windscreen Wiper Switch;
948, 1200 & 12/50 (1) 2H4841
13/60 (1) 149138
Knob (for 2H4841) (1) 704875
Knob (for 149138) (1) 725374
Washer Pump (1) 609173
Washer Knob (1200, 12/50) (1) 609946
Washer Bottle (1) 609172
Retaining Clip (Washer bottle) (1) RTC2392
PERFORMANCE Washer Pipe Kit (1) RH5083
IGNITION PARTS “T” Piece (washer pipe) (1) 612601
Washer Jet (2) 608554

ELECTRICAL
Headlights & Fittings
HALOGEN HEADLIGHT
CONVERSION KIT BULB TYPE HEADLIGHTS;
948 & EARLY 1200
Headlamp Unit (glass) (Bulb type)
RHD (2) GLU501
LHD (2) GLU513
Outer Chrome Cowl (2) 211447
Seal (cowl) (2) 3H2962
Retaining Rim (Chrome) (2) 17H5205
Light unit retaining.
Bulb (40/50Watt) (2) GLB414
Bulb Holder (2) 70361
Headlamp Bowl Assy (Plastic) (2) S5400
Inc. plastic outer bowl, steel inner seat
& lamp retaining rim.
Gasket (Bowl to body) (2) 9403
Headlamp Adjuster Kit (2) BHM7058
Per headlamp.
Halogen Conversion Kit;
RHD (with or without pilot) (1) RB7129
LHD (with or without pilot) (1) RB7082
LHD - France (pilot type) (1) RB7160
Note; Halogen lights should only be used with vehicles
equipped with alternators. See our alternator conversion kit.
Halogen Bulb;
100/80w Uprated (each) (2) GLB484
‘Xenon’ 60/55w (pair) (1) GLB472X
Front Fog Lights (pair) (1) RX1370
Rectangular with plastic covers.
HEADLAMP STONE GUARDS
SEALED BEAM TYPE HEADLIGHTS;
LATE 1200, 12/50 AND 13/60.
Headlamp Unit (glass);
sealed beam type.
RHD (2) GLU132
LHD (2) GLU133
Outer Chrome Cowl (2) 211447
1200 &12/50 only.
Outer Chrome Bezel (13/60 only);
Right Hand (1) 621540
Retaining Rim (Chrome) (2) 515218A
Seating Rim (inside light bowl) (2) 27H6481
Headlamp Bowl Assy (Plastic) (2) S5400
Headlamp Stoneguards (pair) (1) RR1175 Inc. plastic outer bowl, steel inner seat
Clip on. & lamp retaining rim.
Gasket (headlamp bowl to body) (2) 9403
Headlamp Adjuster Kit (2) BHM7058
Per headlamp.
RHD (with or without pilot) (1) RB7129
LHD (with or without pilot) (1) RB7082
LHD - France (pilot type) (1) RB7160
Note; Halogen lights should only be used with vehicles
equipped with alternators. See our alternator conversion kit.
Halogen Bulb;
100/80w Uprated (each) (2) GLB484
‘Xenon’ 60/55w (pair) (1) GLB472X
Front Fog Lights (pair) (1) RX1370
Rectangular with plastic covers.

ELECTRICAL
Front Side/Flasher
Lamps
Note: Due to the many variations of side/flasher
lamps which were fitted to the Triumph Herald, and
problems of availability, we have listed just 2 types
(which are not interchangeable).
The very early models were produced with a small
lamp fitted with plastic lenses and used a double
filament bulb (GLB380).
Later models were supplied with a slightly larger
lamp, with glass lenses, 2 bulbs and an amber ‘cover’
over the flasher bulb. One variation of this type of
lamp was the face of the lens, some were ‘flat’, and
some were ‘Peaked’, the two versions of this later
lamp are interchangeable when fitted as lamp
assemblys. The lamps that we supply are fitted with FRONT FOG LIGHTS - RX1370
the ‘Peaked’ type lenses.
Note: Trying to determine by chassis number the type
of lamp fitted can be slightly frustrating, for It was not
an uncommon sight to see consecutive Heralds on the Rear Lamps & Fittings Rear Number Plate Lamp
assembly line fitted with different side/flasher lamps,
as it all depended on which type of bonnet had been Note: There were two variants of rear lamps fitted to Rear Number Plate Lamp;
fitted !! the Herald. The lamps fitted to the early 1200’s had a 948 & 1200 (1) 127916
clear plastic disc (fixed to the lens) in front of the 12/50 & 13/60 (1) 703829
bulbs, which acted as a magnifying glass.
VEHICLES FITTED WITH SINGLE BULB The later type lamps were produced with
Chrome USA models (1) 127916
LAMP & PLASTIC LENSES. polished anodised aluminium Bulb (1) GLB989
Early 1200 to 1963/64 approx. reflectors, which were part of the Cowl;
Side/Flasher Lamp Assy (2) 205526 base unit. We only supply the 948 & 1200 (1) 609680
Lens (for 205526) (2) 510762 later type lamps. The two 12/50 & 13/60 (1) 712412
Rim (2) 510756 lamps are interchangeable Estate (1) 704789
Gasket (lens to body) (2) 122229 as units, but not the lenses. Seal (cowl to body);
Bulb (2) GLB380 Note: Early backplates 948 & 1200 (1) 607879
were self-tapping screw 12/50 & 13/60 (1) 621264
VEHICLES ORIGINALLY FITTED WITH fitment, late backplates
TWIN BULB LAMP AND GLASS LENSES. were fixed by stud &
948, late1200, 12/50 & 13/60. nut. To fit the later
Side/Flasher Lamp Assy (Peaked lens type); type backplates you
Right Hand (1) 216416 have to ‘push-out’
Left Hand (1) 216417 the screw clips.
Lens;
REAR LAMP LENS 514416
Amber Cover (2) 505854 Rear Lamp Assy (2) 212124 NUMBER PLATE LIGHT COWL - 712412
Rim (2) 510756 Lens Assy - Late (2) 514416
Gasket (lens to lamp body) (2) 122229 Lens Assy - Early (2) 508542 Fog lights
Bulb - Side Light (2) GLB989 Finisher Strip - Lens (2) 508544
Front Fog Lights (Rectangular, pair) (1) RX1370
Bulb – Indicator (2) GLB382 Fixing Screw (4) 508543
Rear Fog Light (Each) (2) RB7092
Bulb Holders;
Stop & Tail (2) 508545
Indicator (2) 508537 Driving Lamps
Bulb Stop/Tail (2) GLB380
Driving Lamps (pair) (1) RX1556
Bulb Indicator (2) GLB382 5" dia. Chrome
Gasket - Lens Sealing (2) 508546
Reflector - Red (2) 121401
Interior Lighting
Facia Lamp Assy
DRIVING LAMPS - 948 & early 1200 (1) 610126
RX1556 1200, 12/50, 13/60 (1) 611769
Bulb (facia and roof lamp) (a/r) GLB239
Courtesy Light Switch (2) 609791
Roof Lamp Lens only (estate only) (1) 606855L
Roof Lamp Base only (estate only) (1) 606855B
Switch (roof lamp) (1) 609791

ELECTRICAL
Relays & Horns Battery
Horn - Hi Note (1) GGE164 Battery (Available for collection only);
Horn - Low Note (1) GGE165 Premium (1) GBA3015
Air Horns (pair) (1) RX1381 Economy (1) GBY3101
Indicator Relay (1) GFU103 Battery Conditioner (See panel) (1) RX1410
WASHER KNOB - 609946 Battery Charger (Conventional type) (1) GAC7106
Voltage Stabiliser;
Late 1200 & 12/50 (1) 128484 Retaining Hook - Battery (2) 618434
13/60 (1) 148876A Battery Retaining Bar (1) 142087
Wing Nut (for retaining bar) (2) 132068
AIR HORNS - Washer (for retaining bar) (2) WP127
RX1381
CHOKE KNOB
- 143136
Battery Leads
Starter to Solenoid (1) 507899
Battery to Earth (Negative) (1) 516376
Engine to Earth (1) 507901
Battery to Solenoid (Positive) (1) 516377
Switches & Controls
FACIA / DASH MOUNTED SWITCHES BATTERY CONDITIONER
Ignition Switch;
948 & Early1200 (1) 111646
No voltage stabiliser.
1200 Late, 12/50 & 13/60 (1) 127651
Barrel & Keys (1) 24G1345
Late 1200, 12/50 & 13/60 only.
Lock/Barrel & Key Set (1) RH5271
Door, boot, ignition and glove box.
Master Light Switch
948, 1200 & 12/50 (1) 125245 Instruments & Cables
13/60 (1) 1H9077 Speedometer;
Knob (Light Switch); 1200 (early, no voltage stabiliser) (1) 208250
1200 & 12/50 (1) 704877 1200 (late) & 12/50 (1) 213405
13/60 (1) 622672 1200 Estate (1) 213440
Heater Blower Switch (1) 149011 13/60 (1) 214527
Windscreen Wiper Switch; 13/60 (LHD KPH) (1) 214528
948, 1200 & 12/50 (1) 2H4841 Voltage Stabiliser;
Knob (for 2H4841) (1) 704875 1200 Late & 12/50 (1) 128484 The battery charger that turns on
Washer Knob (1200,12/50) (1) 609946 13/60 (1) 148876A
Windscreen Wiper Switch Speedometer Cable (All) (1) GSD111
and off, automatically.
& Washer Pump (13/60) (1) 149138 Fuel Gauge; Suitable for all 12 volt batteries (from 5AH to
Knob (for 149138) (1) 725374 1200 Early (no voltage stabiliser) (1) 131437 100AH), this superb product constantly revitalises
Heated Rear Window Switch (1) 156467 1200 Late & 12/50 (1) 145641 the battery cells - helping to extend cell life,
All models if fitted. 13/60 (1) 148706
Choke Cable Assy; without the danger of overcharging.
Water Temperature Gauge 13/60 (1) 148705
1200 & 12/50 (1) 401458 Thermal Transmitter (for 148705) (1) GTR108 Battery Conditioner Kit - RX1410CTEX
13/60 (1) 402694 Bulb Instrument/Warning (a/r) GLB987 Comes complete with all fittings & operating instructions.
Knob only (choke) (1) 143146
LOOK AT THESE BENEFITS;
COLUMN MOUNTED SWITCHES Designed to be left connected for long periods.
Steering Lock/Switch (1) 2190611 Use without disconnecting vehicle electrics.
13/60 when fitted. L.E.D. battery condition display.
Indicator Stalk (1) 158966 Thermal cut-out facility.
Lighting Stalk; 12 month guarantee.
1200, 12/50 (side, main & dip) (1) 131275
13/60 (side, main, dip & flash) (1) 147278 Can also be used for these applications
providing they use a 12 volt battery;
Escutcheon/Covers (2) 708479 Caravans, lawn mowers, motorbikes, motor boats, wheel
Indicator and lighting stalks. chairs and general leisure use.
Labels - Instructions (Transfers for 708479 covers);
Lighting (1) 611400
Indicator SPEEDO BATTERY CHARGER GAC7106
RHD (1) 611012 Conventional type 6v/12v
(EARLY 1200)
LHD (1) 611011 - 208250
Horn Push (1) 150277
Clip (horn push) (1) 204741
"Pencil" Connector (horn push) (1) 142534
MISCELLANEOUS SWITCHES
Brake Light Switch;
Fitted in 5 way Hydraulic
junction (948 & early 1200). (1) 132569
Fitted on Brake Pedal Oil Pressure
(all other models)
Courtesy Light Switch
(1)
(1)
134529
609791
Gauge & Oil/Water Gauge
You can either guess your oil pressure – or fit one of our kits. Adaptor;
Oil Pressure Switch (1) GPS117
Oil Pipe to Block (1) 143943
Oil Pressure Gauge Kit (1) RX1351/O
Includes gauge pipe etc. Temp Sender to Water Pump
Wiring Harness Oil Pressure and Water
Housing (1) 11K2846
Washer - Copper (for adaptor 11K2846) (1) AED172
Full Loom (RHD models only); Temperature Gauge Kit (1) RX1351/OW
Includes gauge pipe etc. “T” Piece (1) RX1352
1200 & 12/50 models (1) 211142 Bracket (for remote mounting of gauge) (1) RB7050 Required when fitting oil pressure gauge kit if retaining low
13/60 models (1) 308333 Pressure warning light.

CHASSIS
CHASSIS FRAME & OUTRIGGERS
305461
208750
205053
208893 132435
208246
305462
208247 208751
205053
FRONT CROSS TUBE
REFER TO LISTINGS
208894
MOUNTING BRACKET CHASSIS PLATE - RH5273

REFER TO LISTINGS
RH5275 RH
RH5276 LH 305592 RH
305593 LH
Chassis
1200 (LATE), 12/50 & 13/60
Chassis to Body Mounting Kit (1) RH5086
Kit includes bolts, washers & mounting rubbers.
Front Cross Tube Assy;
948 (1) 205317
1200, 12/50 (1) 208184
13/60 (1) 209012
Front Cross Tube only;
NOT supplied with brackets.
948 (1) RH5277
1200, 12/50 & 13/60 (1) RH5278
Front Cross Tube End Repair (All models);
Right Hand (1) RH5275
Left Hand (1) RH5276
Mounting Bracket (Cross Tube);
948 & 1200 (2) RH5279
12/50 & 13/60 (2) RH5280
Front Outrigger;
Centre Rigger;
Rear Outrigger;
Side Chassis Rail (RH & LH) (2) 205053
Bracket Sill Mounting (8) 607696
Rear Chassis Extension;
Mounting Bracket Differential (2) 132435
Front Suspension & Engine Mounting Turret;
Spacer Block - Chassis Mounting (a/r) CD26326
Distance Tube-Body Mounting (4) 609824
Side Rail;
to Bulkhead Anchor Kit (4) RH5291
to Rear Body Anchor Plate (4) RH5292
Chassis Plate (Identification) (1) RH5273

BODY PANELS & FITTINGS
FRONT PANELS & BONNET 703847
948, 1200 & 12/50 MODELS 805922
805827
RH5098
607663
802950
611292
901398
805817 609272
610521
616925 903076
704087
703628 59191
608500 612479
609379 607869
FRONT 704086
GRILLE
SEE LISTINGS 903075
704033
607629
121254 901397
121255
607910
608353 805554
611291
607663
903154 LH
511534 903155 RH
REPAIR PANEL 805826
805816 RH5120 RH
RH5122 LH
703627
948, 1200 & 12/50 MODELS

Front Panels & Bonnet
948, 1200 & 12/50
Bonnet to Bulkhead Seal (1) 609272
Bonnet Handle (948 & early 1200) (1) 703847
Moulding - Bonnet Top (1) 805922
Clip (moulding) (a/r) 611504
Rivet (for clip) (a/r) 557922
Front Wing;
Front Wing Wheel Arch Repair Panel;
Right hand (1) RH5120
Left hand (1) RH5122
Corner/Wing Panel;
Stiffener Panel; Seal (wheel arch to bulkhead) (2) 704033 Clip (for 610521) (1) 59191
Headlamp Aperture to Grille Aperture Clip (for 704033) (20 608520 Grommet (Rubber) (1) 616925
Right hand (1) 611292 Inner Valance; Bonnet Stay Rod (Threaded) (2) 131234
Left hand (1) 611291 Right hand (1) 903155 Nut;
Grille Aperture to Wheelarch Left hand (1) 903154 RH Thread (2) JN2110
Right hand (1) 704087 Seal (Inner Valance) (2) 609098 LH Thread (2) 131233
Left hand (1) 704086 Bonnet Pivot Tube (1) 612479 Front Grille;
“D” Panel; Bracket (Pivot Tube) (4) 607869 1200 (1) 703801
Right hand (1) 703628 Link Plate (Pivot Tube) (4) 121254 12/50
Left hand (1) 703627 Spring (Bonnet) (2) 608500 Right hand (1) 807501
Headlamp Reinforcing Panel; Fulcrum Pin (2) 607910 Left hand (1) 807500
(RH & LH) (2) 802950 Bonnet Catch Assy (2) 607663 Grille Surround (1) 805554
Front Inner Wheel Arch; Bonnet Catch Fitting Kit (1) 607663FK Centre Moulding-Grille (12/50 only) (1) 613994
Outer section Bonnet Lock (Pair) (1) 562116 Bracket - Overider (2) 608353
Right hand (1) 901398 Bonnet Locating Cone; Front Valance - Lower (1) 511534
Left hand (1) 901397 Standard (2) 612962 Bracket - Valance End (2) 607629
Inner section Heavy Duty (2) 612962HD Seal (valance to wheel arch) (2) 609379
Right hand (1) 903076 Rubber Buffer (Bonnet) (2) CD22869 Bumper Retaining Strip (2) RH5229
Left hand (1) 903075 Bonnet Stay (Bonnet to engine valance) (1) 610521


FRONT PANELS & BONNET
806402
13/60 MODELS
713268 706162
607663 706149
59191 RL1402
901398
616925
209403 RH
209404 LH
610521
903076
703628 704087 706161 609272

609379 704086 607869 612479
812140
608500 704033
607629 121254 903075
214579 713267
607910
131234
712768
712767
816602 607663
903155 RH 901397 REPAIR PANEL

903154 LH RH5120 RH
RH5122 LH
609379
621540 RH 812210 703627

621539 LH
13/60 MODELS
Front Panels & Bonnet
13/60
Bonnet to Bulkhead Seal (1) 609272
Moulding - Bonnet Top (1) 806402
Clip (bonnet top moulding) (a/r) 611504
Rivet (for clip 611504) (a/r) 557922
Moulding - Bonnet Front;
Centre (1) 706149
Corner
Clip (bonnet front moulding) (a/r) 608817
Front Wing;
Right hand (1) 713268 Seal (wheel arch to bulkhead) (2) 704033 Grommet (Rubber) (1) 616925
Clip (for 704033) (20) 608520 Clip (for 610521) (1) 59191
Front Wing Wheel Arch Repair Panel;
Right hand (1) RH5120 Inner Valance; Bonnet Stay Rod (Threaded) (2) 131234
Left hand (1) RH5122 Right hand (1) 903155 Nut (stay rod);
Left hand (1) 903154 RH Thread (2) JN2110
Wing Badge BL Blue (13/60) (2) 725525
Seal (Inner Valance) (2) 609098 LH Thread (2) 131233
Stiffener Panel;
Headlamp Aperture to Grille Aperture Bonnet Pivot Tube (1) 612479 Stiffener Panel (Valance to Radiator) (1) 214579
Right hand (1) 611292 Bracket (Pivot Tube) (4) 607869 Front Panel (Grille/Headlights) (1) 812140
Left hand (1) 611291 Link Plate (Pivot Tube) (4) 121254 Front Grille (1) 816602
Grille Aperture to Wheelarch Spring (Bonnet) (2) 608500 Cover (Grille fixing points) (10) 626575
Right hand (1) 704087 Fulcrum Pin (2) 607910 Clips (Beading inside grille) (12) 623316
Left hand (1) 704086 Bonnet Catch Assy (2) 607663 Headlamp Bezel;
“D” Panel; Bonnet Catch Fitting Kit (1) 607663FK Right hand (1) 621540
Right hand (1) 703628 Bonnet Lock (Pair) (1) 562116 Left hand (1) 621539
Left hand (1) 703627 Bonnet Locating Cone; Bracket - Overider;
Front Inner Wheel Arch; Standard (2) 612962 Right hand (1) 712768
Outer section Heavy Duty (2) 612962HD Left hand (1) 712767
Right hand (1) 901398 Rubber Buffer (Bonnet) (2) CD22869 Front Valance (1) 812210
Left hand (1) 901397 Bracket (Valance to chassis) (2) 607629
Bonnet Stay (bonnet to wheel arch);
Inner section Right hand (1) 209403 Seal (Valance to wheel arch) (2) 609379
Right hand (1) 903076 Left hand (1) 209404 Bumper Retaining Strip (2) RH5229
Bonnet Stay (Bonnet to engine valance) (1) 610521
725564 805937
802846 804612
706120 RH5304
RH5091 806692 RH (SHADED)
(SHADED) 903181
804611
802845
806269
PRESSED 608269 725563
806692 LH
806262
(SHADED)
703626 RH FLOOR PANELS
703625 LH
PRESSED
608695 566034 607655 & REAR ARCHES
Floor Panels Body Mounting Brackets Rear Panels, Sills
& Rear Arches Front Floor (Front) (2) 607548 & Windscreen Gutters
Front Floor - Pressed (shaped); Rear Floor (RH & LH); Windscreen Gutter (repair);
Right hand (1) 806269PRE Treadplate Support (2) 607655 Right hand (1) RH5295
Left hand (1) 806262PRE Rear Floor Support (2) 612295 Left hand (1) RH5294
Front Floor Repair Panel; “B” Post; “B” Post Assy;
Flat panel with side lips. Right hand (1) 703626 Right hand (1) 703808
Right hand (1) 806269 Left hand (1) 703625 Left hand (1) 703807
Left hand (1) 806262 Body to Chassis Mounting Kit (1) RH5086 Rear Wing;
Sealing Strip; Right hand (1) 902271
Front to rear floor inner (2) 608269 Left hand (1) 902270
Front to rear floor outer (2) 608695 Outer Sill - Full;
Treadplate-Repair Panel (RH & LH) (2) 566034 Boot Floor Right hand (1) 803071
Treadplate Finisher (2) 806598 Left hand (1) 803070
Boot Floor Side (repair);
Screw - Retaining (14) 511546 Bracket - Sill Mounting (8) 607696
Rear Seat Pan (Repair); Rear 1/4 Valance;
Right Hand (1) 806692RH Right hand (1) 705884
Boot Floor Panel (1) 903181
Left Hand (1) 806692LH Left hand (1) 705883
Boot Floor Heel Panel (repair) (1) RH5304
Rear Inner Wheel Arch (outer section); Clip - 1/4 Valance (a/r) FA3057/4
Right hand (1) 802846 Washer-Plain (boot floor to chassis) (4) CD26326
Bolt - 1/4 Valance (a/r) UL2704
Left hand (1) 802845 Grommet (spare wheel well) (1) 600399
Bumper Retaining Strip (1) RH5229
Rear Inner Wheel Arch (inner section); Anchor Plate - Seatbelt (2) 621271
Rear Wing Repair Panel;
Right hand (1) 725564 Front Lower Side
Left hand (1) 725563 Right hand (1) RH5088
Rear Centre Valance (1) 805937 Left hand (1) RH5090
Less bumper retaining strip.
Wheel Arch
Bumper Retaining Strip (1) RH5229 Right hand (1) RH5106
Gear Box Tunnel Cover (fibreglass) (1) 706120 Left hand (1) RH5108
Seal Kit -Tunnel Cover (1) RH5091 Rear Lamp Panel (RH & LH) (2) 804613FG
Composite material.
REAR PANELS Sealing Rubber (roof to deck);
Saloon (1) 611750
Coupé (1) 803078
RH5295 RH Finisher (saloon only) (1) 613963
RH5294 LH Roof sealing rubber.
GUTTER REPAIR
708308
804613FG
902271
902270
RH5106 RH 705884 LH
RH5108 LH 705883 RH
ARCH REPAIR PANEL
RH5088 RH
708307 RH5090 LH
LOWER WING
REPAIR PANEL
REAR ROOF 803071 RH

TO DECK SEAL - 803070 LH
611750

DOOR PANELS 803558/9
DOOR LOCK
CAM MECHANISM
SALOON RH 706119
703956 LH 706118
704324
GLASS
CONVERTIBLE
703795 508312 RH
508311 LH
FRAME
613417
SEATING STRIP
803077 RH
803076 LH
REGULATOR
609256
559474 607824
703972 RH 608278
703971 LH
706117 LH 608288 610170
706221 RH
607841 602821 B’ POST STRIKER PLATE

SEAL RH 607862, LH 607861
608451
607823 614147 RH
608452 614146 LH
607862 RH
607861 LH 603382
704643 600832
608520
705881 608454
610137
611901 RH 608703 650261
611900 LH 550924 600832
GHF300
DOOR SHELL
902257 RH 603382
902256 LH 650261
704564 RH 706119 RH 613017
901339 RH
901338 LH 704563 LH 706118 LH
DOOR SKIN
Door Panels & Hinges Door Handles & Fittings Door Glass & Controls
Door Shell (Bare); Door Handle Assy; Drop Glass;
Right hand (1) 902257 RH - Locking (1) 706117 Saloon/Estate (2) 703956
Left hand (1) 902256 LH - Non Locking (1) 706221 Coupé/Convertible (2) 703795
Door Skin; Lock/Barrel & Key (door only) (1) 567019 Channel - Glass Lift;
Right hand (1) 901339 Lock/Barrel & Key Set (1) RH5271 Right hand (1) 703972
Left hand (1) 901338 Per car: door, boot, ignition, cubby. Left hand (1) 703971
Door Skin Repair Panel; Door Handle Gasket; Glass Seating Strip (2) 613417
Large (2) 608451 For glass lift channel.
Lower Section
Small (2) 608452 Glass Waist Seal - Outer (cut to fit) (2) 608278
Right hand (1) RH5093
Left hand (1) RH5095 Door Striker; Clip - Outer Seal (16) 613869
Note: re-use existing springs. Glass Waist Seal - Inner (2) 608288
Bottom (Underside) Right hand (1) 607862
Right hand (1) RH5121 Clip - Inner Seal (16) GHF1582
Left hand (1) 607861 Weatherstrip Clip Fitting Tool (1) RX1562
Left hand (1) RH5123
Gasket (2) 610137 Front Channel (Drop Glass) (2) 559474
Door Aperture Seal: Flock material.
Available in black, blue, red, beige, chestnut & tan. Cover Plate (Striker);
Saloon Models (2) RX3004 Right hand (1) 611901 Cover Vent Top (Prevents draught) (2) 609143
Convertible Models (2) RX3005 Left hand (1) 611900 Rear Channel;
Screw - Door Catch (6) SF604051 Right hand (1) 704564
Hinge Assy (4) 607824 Left hand (1) 704563
Hinge Pin (4) 607823 Lock Cam Mechanism;
Right hand (1) 706119 Regulator - Drop Glass;
Screw Hinge to Body (4) SF605061 Left hand (1) 706118 Right hand (1) 803077
Screw Hinge to Body (8) SH605071 Push Button; Left hand (1) 803076
Washer - Locking (12) GHF332 Right hand (1) 567017 Pivot Bolt (Regulator) (2) 607841
Screw - Hinge to door (12) SH605071 Left hand (1) 567018 Tie Rod (Glass Channel) (2) 704643
Washer - Locking (12) GHF332 Remote Control; Clip (Tie Rod) (2) 608520
Door Check Strap (2) 610170 Right hand (1) 614147 Reinforcer (Regulator pivot) (2) 705881
Seal Check Strap (2) 602821 Left hand (1) 614146
Anti Burst Catches (convertible only) (2) 703741 Washer (Remote to lock assy)
Washer - Plain (Remote to lock assy)
(2)
(2)
550924
GHF300
Front 1/4 Light
Clip (Remote to lock assy) (2) 608703 Glass - Front 1/4 Light (2) 704324
Interior Door Handle (opening) (2) 608454 Seal - 1/4 Light (Pair) (1) 803558/9
1/4 LIGHT Pin (Interior door handle) (2) 600832 Frame - 1/4 Light;
SEAL (PR) Right hand (1) 508312
Escutcheon (Interior door handle) (2) 650261 Left hand (1) 508311
803558-9
Spring - Conical (2) 603382 Glazing Strip (2) 570228
Handle - Door Pull (2) 609256 Bracket (LH quarter light handle) (1) 608637
Window Winder Handle (2) 613017 “A” Post Seal (2) 630755
Pin (Winder Handle) (2) 600832 Locking Handle Quarter Light;
Escutcheon (Winder handle) (2) 650261 Right hand (1) 608545
BOOT LID & SEALS
SALOON
805762-3
PAIR SALOON
803357 604917/8
SIDE & REAR GLASS
SEE LISTINGS FOR DETAILS
603212
BOOT LID
SEE LISTINGS
FOR DETAILS
603771
YKC68 608192
611225
LOCK/HANDLE
SEE LISTINGS
FOR DETAILS
TAILGATE HANDLES
Boot Lid & Locks (ESTATE)
RH 610359
Boot Lid; LH 610360
1200 & 12/50 (1) 806133
13/60 (1) 811717
Hinge Assy (Pair) (1) 604917/8
Nut (Hinge to boot lid) (4) GHF200
Nut (Hinge to rear deck) (2) GHF222
Gasket (Hinge to boot lid, all models) (2) 603212
Gasket (Hinge to rear deck) (2) 603771
Boot Seal (1) YKC68
Boot Lid Stay (1) 608192
Handle Assy; Windscreen/Roof Seal Rear Glass/Seal & Trim
Saloon only (1) 607978 & Glass Rear Windscreen;
Estate/Courier only Saloon (1) 803355
Right hand (1) 610359 Windscreen;
Note: windscreens are collection only. Saloon - Heated (1) 571380
Left hand (1) 610360 Laminated (Clear) (1) 906706 Coupé (1) 901422
Barrel & Keys (1) 514202 Windscreen Rubber (1) 805856 Estate/Courier (1) 704725
Escutcheon (Handle) (1) 607978 Finisher (1) 613956 Sealing Rubber (rear screen);
Gasket (1) 600949 Clip - Finisher (1) 611437 Saloon (1) 803357
Lock/Latch Assy; Seal (Windscreen frame to roof) Coupé (1) 902754
Saloon only (1) 611226 Saloon (1) 703696 Estate/Courier (1) 804288
Estate/Courier Rear/Side 1/4 Glass;
Right hand (1) 602217 Saloon (2) 803358
Left hand (1) 602216LH Estate (2) 704788
Catchplate/Striker (saloon only) (1) 611225 Sealing Rubber (rear/side glass);
Saloon (pair) (1) 805762-3
Estate (pair) (1) 704786-7
REAR 1/4 LIGHT

SEAL (PAIR)
805762-3
RUBBER SEALS
FOR MOST
APPLICATIONS

BODY FITTINGS
REAR
Body Side Mouldings
OVERRIDERS 948 1200 & 12/50 MODELS
RH 703709
LH 703708 Front Wing Moulding (RH & LH) (2) 703731 ‘A’ POST CAPPINGS
Door Moulding (RH & LH) (2) 703733
Rear Wing Moulding; Cappings-
Right hand (1) 703737 Convertibles Only
“A” Post Capping;
Clips (42) 567228 RH (1) 610149
13/60 MODELS LH (1) 610148
Front Wing Moulding; “B” Post Capping;
Right hand (1) 706165 Front
Left hand (1) 706164 RH (1) 611238
Bumpers & Overiders Door Moulding (RH & LH) (2) 703733 LH
Rear
(1) 611237
Rear Wing Moulding;
FRONT RH (1) 611258
Right hand (1) 806995 LH (1) 611257
White Bumper Set (front & rear) (1) RH5102 Left hand (1) 706652
Whole car set, 6 pieces. Finisher Squab;
Left hand end (1) 613141 RH (1) 704684
Finisher - Bumper End (2) 704585
Clips (42) 567228 LH (1) 704683
Screw - Self Tapping (locates 704585) (2) AD610042
Front Overiders;
1200 & 12/50 (RH & LH) (2) 706634 Rear Lamp Mouldings WING
13/60 MIRROR
Right hand (1) 706155 Rear Lamp Mouldings;
HEADS
Left hand (1) 706154 Upper Horseshoe (2) 704724
Seating Strip - Black (4) 608491 Clips (for 704724) (8) 613869
Overider mounting strip. Lower Strip (4) 704782
Bracket - Overider; Clips (for 704782) (12) 608817
1200 & 12/50 (RH & LH) (2) 608353
13/60
Right hand (1) 712768 Rear Roof/Screen
Left hand
Distance Piece*
(1)
(2)
712767
608098
Mouldings
Bolt* (2) BH605221 ALL MODELS
Washer - Locking* (2) GHF332 Rear - Upper Moulding (1) 704026
*Overider to grille all models except 13/60.
Setscrew (2) SH605071 Clip (for 704026) (3) FC2803
Washer; Rear Corner Moulding
Plain (2) GHF301 RH (1) 704744
Locking (2) GHF332 LH (1) 704743
Rear-Side Moulding
REAR RH (1) 609758 Mirrors
White Bumper Set (front & rear) (1) RH5102
Whole car set, 6 pieces. LH (1) 609757 Rear View Mirror (1) 612162
Finisher - Bumper End (2) 704585 Clips (for side mouldings) (6) 609891 Door Mirror;
Screw - Self Tapping (locates 704585) (2) AD610042 Chrome (flat type glass)
Rear Overider; RH (1) GAM211
Right hand (1) 703709 LH (1) GAM212
Left hand (1) 703708 Chrome (convex glass)
RH (1) GAM213
Seating Strip - Black (4) 614041
Overrider mounting. LH (1) GAM214
Distance Piece (2) 608858 Black
RH (1) GAM261
Bolt (2) BH606161
LH (1) GAM262
Washer; ‘Bullet’ Style (RH or LH) (2) GAM105
Plain (2) GHF302
Locking (2) GHF333 Wing Mirror (chrome);
‘BULLET’ Arm only (2) RH5284
Bolt (2) BH606441 STYLE Mirror Head (rectangular)
MIRROR Flat Glass (2) RH5286
Bonnet/Front Mouldings GAM105 Convex Glass
Mirror Head (round)
(2) RH5285
948 1200 & 12/50 MODELS Flat Glass (2) RH5288

Convex Glass (2) RH5287
Bonnet Top Moulding (1) 805922
Quarterlight Mirror (2) GAM115
Bonnet Handle (948 & early 1200) (1) 703847
Clip (for 805922) (5) 611504
Rivet (for 611504) (5) 557922
Chrome Rim-Headlamp (2) 211447
Triumph Shield Badge (front grille);
1200 (1) 608380
12/50 (1) 613995
13/60 MODELS
Bonnet Top Moulding (1) 806402
Clip (for 805922) (5) 611504
Rivet (for 611504) (5) 557922
Moulding (bonnet front 13/60) (1) 706149
Clip (for 706149) (9) 608817
Moulding (bonnet corner 13/60);
Headlamp Bezel;
BODY FITTINGS
TRIUMPH
LETTER SET -
RL1402
Badges & Letters

948, 1200 & 12/50 MODELS
“Triumph Shield” Badge
1200 (1) 608380
TRIUMPH BADGE - 623822 12/50 (1) 613995
“Coupé” Badge (1) 608592
“Herald” Badge (1) 611505
“1200” Badge (1) 611526
“12/50” Badge (1) 618060
Also fitted on rear wings of early 12/50 models.
“Crossed Flags” Emblem (2) 607760
Fastener (for all letters and badges) (a/r) GHF1532
HERALD LETTER SET - RH5098 13/60 MODELS
“Triumph” Badge (1) 623822
“13/60” Badge (1) 624258
“Crossed Flags” Emblem (2) 607760
Fastener (for all letters and badges) (a/r) GHF1532
LETTERS
“HERALD” Letter Set (1) RH5098
TRIUMPH Letter H (1) 703868
SHIELD - 1200 Letter R (1) 703863
608380 Letters E, A, L & D (only available as part of letter set)
“TRIUMPH” Letter Set (1) RL1402

Letter T (1) 703862
Letter R (1) 703863
Letter I (1) 703864
Letter U (1) 703865
Letter M (1) 703866
Letter P (1) 703867
Letter H (1) 703868
Fastener (letters to bonnet) (14) GHF1532
ROOF PILLAR BADGES

“Herald”;
COUPE BADGE - 608592 RH (948 & early 1200) (1) 608458
LH (948 & early 1200) (1) 608457
“Triumph”;
RH (late 1200 & 12/50) (1) 613294
LH (late 1200 & 12/50) (1) 613293
RH (13/60) (1) 621853
LH (13/60) (1) 621852
CROSSED FLAGS EMBLEM - 607760
1200 BADGE - 611526 12/50 BADGE - 618060
HEARALD BADGE - 611505

INTERIOR TRIM
INTERIOR TRIM RESTORATION
We have available a full range of interior trim (including carpets, door trim panels and headlining kits) for the Triumph
Herald (both saloon & convertible), so at long last the owners of these Classic Triumphs can now restore, and renovate their
vehicles to a standard that has not been possible for many years.
Whether you are just wanting to replace a damaged board, re-trim a tired seat, replace worn carpets, or are contemplating a complete
interior restoration project, from the following listings you will find the part, or kit, suitable for your needs and budget.
Complete Interior Re-trim Kits

RENOVATION OR COLOUR CHANGE!
If you are considering a complete re-trim of the interior of your Herald, we can
supply a complete interior trim kit.
Ordering everything that is required for such a project could not be easier, all you have
to do - from the list across - is identify your vehicle model, then choose the colour you
require, and by quoting just one part number, you are assured that nothing has been
missed. (our kits are so complete, once you have identified your model, you may even
change the colour!)
WHAT DO OUR KITS CONTAIN?

Although we do not include passenger area carpet sets in our interior trim kits,
they are nonetheless very comprehensive, they even include the Boot trim.
You can use the following as a check list:
2 door trim panels and clips.
Trim for 2 front seats, plus, 2 base cushions, 2 base diapraghms and all necessary
clips, 2 base foam wraps, 2 squab foam pads or squab kits (depending upon model), Complete Interior
and 2 squab strap kits.
Trim Kits
Full rear seat trim kit (saloons & convertibles), plus, for saloons 1 seat base foam &
1 squab foam, and for convertibles1 seat base foam & 1 squab horsehair pad. HERALD 1200 & 12/50
Complete Interior Trim Kit;
For the dash area & footwells, 1 upper & 1 lower dash panel with clips, 1 dash Saloon Models - (RHD) 1200 & 12/50
‘sound’ insulation kit, 1 securing strap kit (for insulation) and 2 front scuttle panels. Black 1 RH5200BLACK
Rear 1/4 trim panels, or trim panel covering kit (depending upon model). Midnight Blue (1) RH5200BLUE
Matador Red (1) RH5200RED
And for saloon models only, 1 headlining kit (except Herald 12/50), covering material Saloon Models - (LHD) 1200 & 12/50
for both ‘B’ posts and 2 rear wheel arch covers. Black (1) RH5216BLACK
For the boot our kits include; 2 boot floor ‘sound’ proofing panels, 1 spare wheel Midnight Blue (1) RH5216BLUE
cover (black hardboard), 1 (Rh) side trim board, 1 boot floor hardura mat kit, 1 tool Convertible Models - (RHD) 1200 Only
pouch (red), 1 jack/tool bag (black hardura), and for convertibles only, 1 boot to hood Black (1) RH5230BLACK
stowage board. Midnight Blue (1) RH5230BLUE
Our kits come with full fitting instructions. Matador Red (1) RH5230RED
Convertible Models - (LHD) 1200 Only
WHAT MODELS DO WE HAVE KITS FOR? Black
Midnight Blue
(1) RH5245BLACK
(1) RH5245BLUE
Our kits cover Herald 1200, 12/50 & 13/60 Saloon and Convertibles, we also Matador Red (1) RH5245RED
have kits for both Rhd & Lhd models. HERALD 13/60
Complete Interior Trim Kit;
Saloon Models - (RHD)
TRIM COLOURS AND STYLE Black

Shadow Blue
(1)
(1)
RH5171BLACK
RH5171BLUE
Our comprehensive range of trim boards and seat trim kits are as the original, Matador Red (1) RH5171RED
both in colour and grain. Light Tan (1) RH5171TAN
Saloon Models - (LHD)
Although the Triumph Herald was produced with a varied selection of trim colours Black (1) RH5180BLACK
(inc Cactus, Phantom Grey and Coffee), Shadow Blue (1) RH5180BLUE
we are only able to supply (for the foreseeable future), a limited colour range for Matador Red (1) RH5180RED
the trim boards and seat trim, Light Tan (1) RH5180TAN
these being Black, Midnight Blue and Matador Red for the Herald 1200, 12/50, Convertible Models - (RHD)
and for the Herald 13/60, Black, Shadow Blue, Matador Red and Light Tan. Black (1) RH5146BLACK
Shadow Blue (1) RH5146BLUE
Our moulded carpet sets and stitched carpet sets are available in a range of colours. Matador Red (1) RH5146RED
Light Tan (1) RH5146TAN
Please refer to ‘Carpets’ section.
Convertible Models - (LHD)
As an added service to our customers we offer a full seat re-trimming service Black (1) RH5168BLACK
(for those who don’t wish to undertake this task !). Shadow Blue (1) RH5168BLUE
Please phone for details. Light Tan (1) RH5168TAN
INTERIOR TRIM
1200 & 12/50 DOOR TRIM PANELS 13/60 DOOR TRIM PANELS
Door Trim Panels Door Aperture Seals

Note:- Door panels are only supplied in pairs Door Aperture Seal (all models);
1200 & 12/50 (Vertical & Horizontal flutes) Saloon Models (furflex)
Door Trim panels (Pair); Black (2) RX3004BLACK
Black (1) RH5161BLACK Blue (2) RX3004BLUE
Midnight Blue (1) RH5161BLUE Red (2) RX3004RED
Matador Red (1) RH5161RED Tan (2) RX3004TAN
Tan (1) RH5161TAN Beige (2) RX3004BEIGE
Door Trim Clip Kit (1) RH5127 Chestnut (2) RX3004CHESTNUT
Per car, 44 clips. Convertible Models
Black (2) RX3005BLACK
13/60 (Horizontal flutes only) Blue (2) RX3005BLUE
Door Trim panels (Pair); Red (2) RX3005RED
Black (1) RH5135BLACK Tan (2) RX3005TAN
Shadow Blue (1) RH5135BLUE Beige (2) RX3005BEIGE
Matador Red (1) RH5135RED Chestnut (2) RX3005CHESTNUT
Door Trim Clip Kit (1) RH5127
Per car, 44 clips. Dash Fittings
“Herald” Nameplate (1) 608466
All except 13/60. FURFLEX DOOR APERTURE SEAL
Door Kick Plate

Door kick plate (2) 806598
Fixing screw (14) 511546

INTERIOR TRIM
FRONT
RH5157 RH5101
Front Seats
SEAT & Re-Trim Kits
RE-TRIM Please note seat front re-trim kits are supplied in car sets only.
HERALD 1200 & 12/50

1200 & 12/50 trim has welded seams.
Front Seat Trim Kit;
Kit inc 2 cushions & 2 squab covers.
Black (1) RH5132BLACK
Midnight Blue (1) RH5132BLUE
Squab Padding Kit (2) RH5129
Kit is per seat and inc back board, squab foam pad,
1 top wadding & instructions.
Base Foam Pad (cushion) (2) RH5156
RH5156 RH5112 Diaphragm (2) RH5118
Foam Wrap (seat frame) (2) RH5125
1200 & 12/50 ‘C’ Clip Pack (1 pack of 2 per seat) (2) RH5154
13/60 RH5118 Seat Clips Pack (2) RH5142
1 pack of 20 per seat.
HERALD 13/60
Front Seat Identification 13/60 trim has stitched seams.
Front Seat Trim Kit;
& Construction Kit inc 2 cushions & 2 squab covers.
Black
Midnight Blue
(1) RH5157BLACK
(1) RH5157BLUE
SEAT IDENTIFICATION
The following listings and descriptions for the Herald seats, are technically correct, and they are Matador Red (1) RH5157RED
described as originally specified by the factory, prior to vehicle production. However, it is quite
Squab Foam Pad (2) RH5101
possible that the seat(s) fitted in your vehicle do not correspond with either our descriptions, or that
Squab Strap Kit (set of 6 straps) (2) RH5112
in the Triumph parts lists. There were many overlaps of the various models (Herald & Vitesse) on the
Base foam pad (cushion) (2) RH5156
production line, couple this with model changes, and the lack of (the correct) finished items on the
Diaphragm (2) RH5118
assembly line, and this has led us to believe that an unknown quantity of vehicles left the factory with
Foam Wrap (seat frame) (2) RH5125
the incorrect specification seats/trim fitted. Not to mention that the previous owner(s) may, at some
‘C’ Clip Pack (1 pack of 2 per seat) (2) RH5154
time, have changed the seats themselves!
Seat Clips Pack (2) RH5142
SEAT CONSTRUCTION 1 pack of 20 per seat.
The internal construction of the front seats for the Herald 1200 and 12/50 differ from the 13/60
models in that they were produced with a squab ‘spring frame’, which was originally covered in
cotton wadding. This material has proved difficult to obtain, so for these models we now supply a
special ‘Squab Foam Pad’ which replaces the ‘spring-frame’, and apart from being easier to fit, the STATIC FRONT
foam pad is indistinguishable from the original both in looks and comfort. SEAT BELT KIT - 565722
40 YEARS OLD!
If you have decided to re-trim your seats, may we suggest that before ordering the kit of your choice,
you inspect very carefully all the seat components to ensure that all is well, including the base foams
and diaphragms (if they are old and mishaped, they wont really compliment your new trim), which
after possibly 40 years of use, could be very tired.
Seat Belts
Front Seat Belt Kit (3-point);
Saloon, Coupe & Estate
Static (per seat) (2) 565722
Inertia (per seat) (2) RH5159
convertible
Static (per seat) (2) RH5221
Inertia (per seat) (2) RH5240
Seat Adjusting Block (4) 608759
Rear Seat Belt Kit (2-point) (1) RS1394
Lap belt, per car.
INERTIA FRONT
SEAT BELT KIT
RH5159
13/60 FRONT SEAT

SQUAB TRIM COVERS IN
MATADOR RED

INTERIOR TRIM SALOON REAR SEAT RE-TRIM
RH5144
COVERS
RH5119
13/60 SALOON RH5115

1200 & 12/50 RH5170
SALOON COVERS
Rear Seat & Re-Trim Kits Rear Seat & Re-Trim Kits
Saloon Convertible
Please note; Rear seat re-trim kits are supplied in car sets only. Please note; Rear seat re-trim kits are supplied in car sets only.
HERALD 1200 & 12/50 SALOON HERALD 1200 & 12/50 CONVERTIBLE
1200 & 12/50 trim has welded seams. 1200 & 12/50 trim has welded seams.
Rear Seat Trim Kit; Rear Seat Trim Kit;
Kit inc 1 cushion & 1 squab cover. Kit inc 1 cushion & 1 squab cover.
Black (1) RH5170BLACK Black (1) RH5139BLACK
Midnight Blue (1) RH5170BLUE Midnight Blue (1) RH5139BLUE
Matador Red (1) RH5170RED Matador Red (1) RH5139RED
Squab Foam Pad (1) RH5094 Backboard (Squab) (1) RH5150 ‘B’ POST COVERS
Base Foam Pad (Cushion) (1) RH5115 RH5186
Horsehair Squab Pad (1) RH5151
HERALD 13/60 SALOON Base Foam pad (Cushion) (1) RH5152
13/60 trim has stitched seams
Rear Seat Trim Kit;
Base Spring Frame Assy (1) RH5153 ‘B’ Post Trim Cover
Complete Squab Assy (Ready to Fit); Saloon Models Only
Kit inc 1 cushion & 1 squab cover.
Black (1) RH5144BLACK Midnight Blue (1) RH5164BLUE
Midnight Blue (1) RH5144BLUE Matador Red (1) RH5164RED ‘B’ Post Trim Cover;
Matador Red (1) RH5144RED Please Note; Trim is supplied per vehicle.
Light Tan (1) RH5144TAN Complete Seat Base Assy (Ready to Fit); 1200, 12/50
Black (1) RH5173BLACK Black (1) RH5186BLACK
Squab Foam Pad (1) RH5119 Midnight Blue (1) RH5173BLUE
Base Foam Pad (Cushion) (1) RH5115 Midnight Blue (1) RH5186BLUEMID
Matador Red (1) RH5173RED Matador Red (1) RH5186RED
HERALD 13/60 CONVERTIBLE 13/60
Rear Seat Lap Belt Kit (2 point) (1) RS1394 13/60 trim has stitched seams. Black (1) RH5186BLACK
Pair. Shadow Blue (1) RH5186BLUESHAD
Rear Seat Trim Kit;
Kit inc 1 cushion & 1 squab cover. Matador Red (1) RH5186RED
REAR SEAT LAP Black (1) RH5179BLACK Light Tan (1) RH5186TAN
BELT KIT Shadow Blue (1) RH5179BLUE
RS1394 Matador Red (1) RH5179RED
Backboard (Squab) (1) RH5150
Horsehair Squab Pad (1) RH5151
Base Foam pad (Cushion) (1) RH5152
Base Spring Frame Assy (1) RH5153
Complete Squab Assy (Ready to Fit);
Shadow Blue (1) RH5191BLUE
RH5139 Complete Seat Base Assy (Ready to Fit); REAR WHEEL
COVERS Black (1) RH5199BLACK ARCH COVERS
Shadow Blue (1) RH5199BLUE RH5205
Rear Wheel Arch Covers
Saloon
Sound Proofing Panels Rear Wheel Arch Covers - Saloon;
Supplied as pairs only.
Dash Sound Insulation Kit (1) RH5213 1200, 12/50
Carpet Under felt Kit (1) RH5065 Black (1) RH5205BLACK
Note; Not required when fitting moulded carpet. Midnight Blue (1) RH5205BLUEMID
General insulation Pad Kit (1) RH5204 Matador Red (1) RH5205RED
Set Of 4 self adhesive sound proofing pads 13/60
for use on inside of body panels etc to reduce resonance. Black (1) RH5205BLACK
CONVERTIBLE Sound Proofing Panel - Shadow Blue (1) RH5205BLUESHAD
1200 & 12/50 REAR SEAT Boot Floor (2 pieces) (1) RH5246 Matador Red (1) RH5205RED
CONVERTIBLE Light Tan (1) RH5205TAN
RE-TRIM
INTERIOR TRIM
DASH MILL
SIDE BOARDS
DASH UPPER
DASH
SIDE
DASH
LOWER
Rear 1/4 Panels
Rear 1/4 panels - SALOON;
Supplied as pairs only.
1200, 12/50
Midnight Blue (1) RH5231BLUE 1200 &12/50
Lower Dash & Scuttle Matador Red (1) RH5231RED
(Mill Boards) 13/60
Panel – Dash Upper; Shadow Blue (1) RH5219BLUE
RHD (Inc clips) (1) RH5195 Matador Red (1) RH5219RED
LHD (Inc clips) (1) RH5203 Light Tan (1) RH5219TAN
Panel – Dash Lower; Trim Clip Kit (1) RH5236
Kit is per car & inc 12 clips.
RHD (Inc clips) (1) RH5208
Rear 1/4 Panels - CONVERTIBLE;
LHD (Inc clips) (1) RH5183 Supplied as pairs only. SALOON
Sound Insulation Kit (Dash) (1) RH5213 1200, 12/50 REAR
Securing Strap Kit (1) RH5218 Black (1) RH5225BLACK
Original Lower insulation retainer. Midnight Blue (1) RH5225BLUE 13/60 1/4
Dash Side/Scuttle; Matador Red (1) RH5225RED PANELS
Drivers Side - RHD 13/60
Right Hand Drive Vehicles. Black (1) RH5237BLACK
1200, 12/50 Shadow Blue (1) RH5237BLUE CONVERTIBLE REAR 1/4 PANELS
Black (1) RH5167BLACK Matador Red (1) RH5237RED
Midnight Blue (1) RH5167BLUEMID Light Tan (1) RH5237TAN
Matador Red (1) RH5167RED Trim Clip Kit (1) RH5236
Kit is per car & inc 12 clips. 1200 &12/50
13/60
Shadow Blue (1) RH5167BLUESHAD Headlining
Matador Red (1) RH5167RED Headlining Kit (Saloon only) (1) RH5241
Light Tan (1) RH5167TAN All models except Herald 12/50.
Passenger Side - RHD (with pocket)
Right Hand Drive Vehicles.
1200, 12/50 Fastners & Fixing Clips
Black (1) RH5176BLACK Door Trim Clip Kit (1) RH5127
Midnight Blue (1) RH5176BLUEMID Per car, 44 clips.
Matador Red (1) RH5176RED “C” Clip Pack (1) RH5154
1 pack of 2 per seat.
13/60
Black (1) RH5176BLACK Seat Clips Pack (1) RH5142
1 pack of 20 per seat. 13/60
Shadow Blue (1) RH5176BLUESHAD Rear 1/4 Trim Clip Kit (1) RH5236
Matador Red (1) RH5176RED Kit is per car & inc 12 clips.
Light Tan (1) RH5176TAN Screw & Cup Washer Pack (1) RH5249
Passenger Side - LHD (with pocket) General purpose fixings,
Left Hand Drive Vehicles. 20 screws & washers.
1200,12/50 13/60
Midnight Blue (1) RH5196BLUEMID
13/60
Shadow Blue (1) RH5196BLUESHAD
Drivers Side - LHD
Left Hand Drive Vehicles.
1200, 12/50
Midnight Blue (1) RH5228BLUEMID
13/60
Shadow Blue (1) RH5228BLUESHAD

INTERIOR TRIM
CARPET SETS
MOULDED CARPETS
Our moulded carpet sets (which are felt backed) include both
front footwells, carpet for the transmission tunnel, full rear
passenger area carpet, and bulkhead (heel) mat. The front
footwell carpets have been designed to ensure a perfect fit
(unlike the originals which worked loose!), and the drivers
carpet has a heel mat fitted. The transmission tunnel carpet
has been cut to provide a ‘snug fit’, and comes supplied with
2 pieces of loose felt (for the sides of the tunnel). The rear
carpet section, although very complex, will mould into shape
as you fit it, this is due to the material (carpet & felt) from
which it is manufactured. Finally, the bulkhead (heel) mat is
again tailor-made for a trouble free fit. Our moulded carpet kits
are supplied in a range of colours.
STITCHED CARPETS
Our stitched carpet sets also include front footwell carpets
(with drivers heel pad), transmission tunnel and rear MOULDED CARPET SET
passenger area carpet, and a bulkhead (heel) mat. They are
made from a high quality tufted pile material, with fully bound
edges and sewn in footwell mats. Our stitched carpet kits are
supplied in a range of colours.
Carpet Sets
All Models
Please note carpets are only supplied in vehicle sets.
Suitable for saloon & convertible.
Moulded Carpet Set - RHD;

Green (1) RH5242GREEN
Blue (1) RH5242BLUE
Red (1) RH5242RED
Biscuit (1)RH5242BISCUIT
Grey (1) RH5242GREY
Moulded Carpet Set - LHD;
Blue (1) RH5243BLUE
Red (1) RH5243RED
Biscuit (1)RH5243BISCUIT
Grey (1) RH5243GREY
Stitched Carpet Set - RHD;
Beige (1) RH5244BEIGE
Blue (Dark) (1) RH5244BLUE
Brown (1)RH5244BROWN
Red (1) RH5244RED
Grey (1) RH5244GREY
Stitched Carpet Set - LHD;
Beige (1) RH5053BEIGE
Blue (Dark) (1) RH5053BLUE
Brown (1)RH5053BROWN
Red (1) RH5053RED
Grey (1) RH5053GREY
Carpet Underfelt Kit (1) RH5065
Not required with moulded carpet sets.
Overmat Set (Front & Rear) (1) RH5052
OVERMAT SET - RH5052
STITCHED CARPET SET

INTERIOR TRIM
BOOT CARPET
KIT - SALOON WING
RH5148 MIRROR
ALSO AVAILABLE HEADS
IN HARDURA
Boot Carpet & Fittings

Boot Carpet Kit (alternative to Hardura); Mirrors
Kit also includes 6 fasteners and webbing for jack.
Rear View Mirror (1) 612162
Saloon (1) RH5148
Door Mirror;
Convertible (1) RH5149 Chrome (Flat Type Glass)
Boot Mat Kit (Hardura, alternative to carpet); RH (1) GAM211
Saloon (1) RH5130 LH (1) GAM212
Convertible (1) RH5131 Chrome (Convex Glass)
Sound Proofing Panel (1) RH5246 RH (1) GAM213
Boot floor (2 Pieces). LH (1) GAM214
Spare Wheel Cover (1) RH5155 Black
Black hardboard. RH (1) GAM261
Side Trim Board (RH) (1) RH5211 LH (1) GAM262
Hood Stowage to Boot Board (1) RH5215 SPARE ‘Bullet’ Style (RH or LH) (2) GAM105
Convertible. WHEEL COVER Wing Mirror (Chrome);
Tool Pouch (Red) (1) RH5214 RH5155 Arm only (2) RH5284
Tool Bag (for jack etc) (1) 725793 Mirror Head (Retangular)
Scissor Jack & Handle (1) 311346 Flat Glass (2) RH5286
Wheel Nut Brace (1) 21A2818 Convex Glass (2) RH5285
TOOL BAG Mirror Head (Round)
725793 Flat Glass (2) RH5288
Convex Glass (2) RH5287
Quarterlight Mirror (2) GAM115
SIDE TRIM
BOARD (RH)
RH5211
TOOL ‘BULLET’
POUCH STYLE
RH5214 MIRROR
GAM105
BOOT FLOOR SOUND PROOFING PANEL

RH5246
HOOD STOWAGE TO BOOT BOARD (CONVERTIBLE) - RH5215

INTERIOR TRIM - HOODS STATIC FRONT SEAT BELT KIT
565722
Hood Seals Hood Stowage Covers

Weather Strip Retainer; Hood Stowage Cover;
Front (above windscreen) (1) 704418 PVC
Front Side (2) 609333 Black (1) 609699
Rear Side (2) 609334 Beige (1) 609699BEIGE
B Post (2) 704463 White (1) 609699WHITE
Seals - Hood Sides (Pair) (2) 609340 Double Duck (1) 609699DUCK
Seal - Hood Front (1) 609366 Canvas, black only.
To top of windscreen.
Mohair (1) 609699MOH
Finisher - Roof Header (Black) (1) 609602 Canvas with lining. Available in black or beige.
Hood Clamp (on windscreen) (2) 609332
Hood Clamp (on header rail) (2) 609331
Screw (for clamp) (8) CMP308
HOOD STOWAGE COVER -

INERTIA FRONT Hood Fasteners 609699
SEAT BELT KIT Hood Popper Kit (1) RH5143
RH5159 Contains 12 hood poppers (male/female)
body studs & rivets. Tonneau Covers
Hood Popper;
Seat Belts Male
Tonneau Cover (Black PVC);
RHD (1) 562920
Fits On the outside of the hood.
Front Seat Belt Kit (3-point); Black (12) ZKC751 LHD (1) 562919
Saloon, Coupe & Estate Chrome (12) ZKC751C Tonneau Cover Fixing Kit (1) RH5360
Static (per seat) (2) 565722 Contains fixing studs and brackets
Female (12) 713501 to fit cover to dash top. Popper type.
Inertia (per seat) (2) RH5159 Fits on the inside of the hood.
Convertible Body Stud (fits on the bodywork) (12) 713511 610124 TONNEAU
Static (per seat) (2) RH5221 Rivet (for use with 713511) (12) 713531 COVER DASH
Inertia (per seat) (2) RH5240 Hood Popper Fixing Tool (1) RX1342 FIXING KIT
Seat Adjuster Block (4) 608759 RH5360
Screw (Hood retaining strip rear lower) (12) 509688
Rear Seat Belt Kit (2 point) (1) RS1394
Lap belt, per car. Nut (for above) (12) 519989
Eyelet Tool (Tonneau) (1) RX1384
REAR LAP Sail Eyelet (Tonneau);
BELT KIT (PR) Male (4) 618177
RS1394 Washer (4) 618178
610125
Tonneau Fixing Peg/Bracket (Dash Top);
Popper type. See photo.
Outer
Centre
(6)
(1)
610125
610124
Wind Deflector -
Convertible
Wind Deflector (1) RH5297
Perspex screen. Fits behind front seats.
Stops wind buffeting.
WIND DEFLECTOR - RH5297
Hood Covers
Hood Cover (PVC);
Heavy Duty Black (as original) (1) 705737OE
Standard PVC Black (1) 705737ALT
Hood Cover (PVC-Everflex);
Top Quality PVC, available in a choice of colours.
Blue (1) 705737BLUE
Beige (1) 705737BEIGE
White (1) 705737WHITE
Tan (1) 705737TAN
Hood Cover (Double Duck);
Black Canvas (1) 705737DUCK
Hood Cover (Mohair) (with lining);
Black (1) 705737MOHBLACK
Beige (1) 705737MOHBEIGE
Blue (1) 705737MOHBLUE
Brown (1) 705737MOHBROWN

ENGINE ROCKER FEED KIT -
ACCESSORIES
ALL MODELS
OIL COOLER KIT K&N AIR FILTERS
FIT AN OIL COOLER KIT FOR
PEACE OF MIND.
ROCKER OIL FEED KIT
These units replace the

existing air cleaner box and improve engine
breathing - they look good too!
Don’t forget to order cleaning and re-oiling fluids. Excessive rocker shaft wear is a classic complaint
Note: Carb needles may require changing depending upon application.
about the Triumph push rod engines. The external
;K&N Filters; rocker feed kit is an effective and easy to fit
solution to the problem. It works by piping oil
1200, 12/50 RH5298 from a plug hole in the cylinder block main oil
Kits include oil cooler radiator, fitting kit, filter adaptor, 13/60 RL1575
hoses & fittings, but not thermostat. gallery up to the cylinder head, thereby
Cleaning Fluid (K&N) (1 Litre) RX1346 maintaining a higher oil flow than standard. No
Element Oil (Use after cleaning); drilling or tapping is required for installation. The
Engine Oil Cooler Kit 514082 29.58ml Sachet RX1347
Thermostat (Engine oil cooler) RS1456 kit is so good, it looks as though it should always
250ml Bottle RX1348 have been there!
Not included in oil cooler kit.
400ml Aerosol RX1349
EXTERNAL ROCKER FEED KIT
ALL MODELS RR1340
OIL PRESSURE GUAGE & OIL PRESSURE/WATER GAUGE
YOU CAN EITHER GUESS The Rocker Feed Kit
YOUR OIL PRESSURE –
OR FIT ONE OF OUR KITS. and Oil Consumption
When the supplementary oil feed to the rocker gear is
fitted, an increase in oil consumption is often encountered.
This is attributed to oil being drawn down worn valve
guides. The extra amount of lubricating oil flowing through
the valve and rocker chamber, as supplied by the feed kit,
exaggerates any tendency for oil to be sucked down worn
Oil Pressure Gauge Kit RX1351/O Adaptor; valve guides past worn valve stems. The best solution is to
Includes gauge pipe etc. Oil Pipe to Block 143943 fit new valves and guides, but this is not always on the top
Oil Pressure and Water temp sender to water pump housing 11K2846 of the repair priority list. To assist in the reduction of oil
Temperature Gauge Kit RX1351/OW Washer - Copper (for adaptor 11K2846) AED172 being sucked down the guides a method of valve stem oil
Includes gauge pipe etc. seal is required. We offer the simple do-nut rubber ring
“T” Piece RX1352
Bracket (for remote mounting of gauge) RB7050 Required when fitting oil pressure gauge kit that is used so successfully on MG sports cars. Its part
if retaining low pressure warning light. number is AEK113, one per valve stem.
Now the clever bit... How to fit them without removing the
cylinder head from the car?
ALLOY ROCKER COVER Each seal needs to be fitted to the valve stem above the
valve guide but below the valve spring upper retaining
cap(s). Remove the rocker cover, rocker gear and the spark
plugs. Cover the holes that the push rods come up through
so nothing can be dropped down into the engine. Turn the
crankshaft so that number one piston is at bottom dead
centre (BDC). Feed a length of clean, pliable rope down the
spark plug hole of number one cylinder, leaving a bit
hanging out so you can retrieve it. Now, slowly and
carefully turn the crankshaft clockwise by hand, a
Alloy Rocker Cover; resistance will be felt as the rising piston in that bore
Alloy finish 214814A compresses the rope against the combustion faces of the
Black (Crackle finish) 214814AP two valves in that cylinder, holding them against their
seats. The valve collets and spring caps of that cylinder
can now be removed without the fear of losing the valves
RADIATOR RELIEF down the bore. The valve stem oil seals can be fitted to
these two valve stems and perhaps a new set of valve
COOLING SYSTEM ADDITIVE springs.
Radiator relief allows your radiator to transfer heat more efficiently,
reducing your engines operating temperature (which is obviously Be honest, this tip has saved the cost of a decoke set!
controlled by the thermostat) by up to 30•F. You therefore have ‘a little bit Once the valve stem oil seals and other parts have been
in hand’ for those hot days stuck in traffic. This proven coolant additive will refitted to this first pair of valves satisfactorily, simply turn
also cut engine warm-up time in half which will reduce engine wear which the crank anticlockwise to BDC, withdraw the rope and
is most extreme when the engine is cold. Fully compatible with water and repeat the process on the remaining cylinders and pairs of
anti-freeze and is safe with cast iron and all alloys. valves.
G 30• F lower operating temperature To be sure that the rope has compressed sufficiently
G 50% quicker warm up time against the faces of the valves, attempt to push the valves
G Safe with water/antifreeze mixture
by hand, as if being acted on by the rockers before
G Safe with cast iron, alloy engines and heads
removing the spring caps or collets, this is the fail safe
G Increased engine life!
G 100% biodegradable, non corrosive, non toxic
A MUST check. This method can be adopted anywhere as it does
G For use in all water cooled engines FOR ALL not require the use of compressed air, special tools or
luck.
RADIATOR RELIEF (946ml) RX1461
Treats 1 engine. OWNERS
STAINLESS STEEL EXHAUSTS EXHAUST INSULATING
ACCESSORIES
HEAT WRAP
REFER TO EXHAUST SECTION

ON PAGE 20-21 FOR DETAILS
ON OUR STANDARD & SPORTS
EXHAUSTS IN STAINLESS
STEEL.
Thermo-Tec exhaust insulating wrap reduces

under bonnet temperatures by as much as 70%,
this increases air intake and exhaust gas velocity
which adds performance.
Retaining the heat in the exhaust protects
you from mechanical burns and it will also help to
prevent under bonnet fires. Any electrical
components which are close to the manifold will
be less prone to heat failure, increasing their life
and performance. As an added benefit, under
bonnet noise is also reduced! Thermo-Tec can be
used on any 4 stroke, 2 stroke or diesel engines
and contains no asbestos or carcinogens.
The Snap Strap Installation Kit secures
Thermo-Tec exhaust insulation wrap to your
tubular manifold/s. A stainless steel high
SUSPENSION OVERHAUL KITS temperature material designed better than hose
clamps and is easier to use.
WHETHER YOU REQUIRE SUSPENSION PARTS FOR A MINOR Front Wheel Bearing Kit RH5027 Also recommended is Hy-cote paint. This
REPAIR, OR YOU ARE PROPOSING A MAJOR FRONT 2 kits required per Vehicle preserves and protects the exhaust wrap after
SUSPENSION/HUB OVERHAUL/REBUILD, HERE WE HAVE A
SELECTION OF KITS THAT WILL ENABLE YOU TO IDENTIFY installation. Extra resins and binders seal the
Complete Trunnion Overhaul Kit RG1192
AND ORDER THE PRECISE AND CORRECT PARTS YOU NEED 1 kit required per Vehicle pores, toughen the surface and help extend the
WITH THE MINIMUM OF FUSS - life of the wrap.
AND SAVE MONEY! See page 29 for further details. Trunnion Bush Kit; 514191
Upper Suspension Overhaul Kit; 2 kits required per Vehicle APPLICATION GUIDELINES FOR TUBULAR MANIFOLDS
Trunnion Overhaul Kit; ENGINE INSULATING SNAP STRAP TYPICAL
with Standard Bushes RH5080 1 kit required per Vehicle TYPE WRAP KIT APPLICATION
with Polyurethane Bushes RH5080POLY Right Hand RG1190 4 Cylinder 1 x RX1382 1 x RX1383 Herald, Spitfire,
Lower (Inner) Suspension Overhaul Kit; TR7,
Left Hand RG1191 Dolomite Sprint
with Standard Bushes RG1193 Bush Kit - car set; 6 Cylinder 2 x RX1382 1 x RX1383 Vitesse, GT6
inc. bushes for suspension, steering rack, TR6
with Polyurethane Bushes RG1193POLY
anti-roll bar and dfferential. 8 Cylinder 2 x RX1382 1 x RX1383 TR7 V8, TR8,
Uprated Front Anti-Roll Bar Overhaul Kit; Standard Bushes RH5361
For vehicles fitted with our conversion kit only. Stag, Rover SD1
When fitted with std bar refer to listings. Polyurethane Bushes RH5361POLY
1 kit required per Vehicle Bolt Kit - car set RH5362 GUIDE TO TYPICAL AMOUNT OF WRAP REQ’D BY PIPE SIZE
with Standard Bushes RL1286 To install bush kit RH5361. PIPE SIZE 2" 3" 4" 5" 6"
with Polyurethane Bushes RL1286POLY
INCHES OF WRAP
PER FOOT OF PIPE 44" 57" 70" 83" 96"
UPRATED SUSPENSION PACKAGES See page 30 for details. EXHAUST INSULATING WRAP -
2" x 50' RX1382
SNAP STRAP EXHAUST WRAP
INSTALLATION KIT RX1383
HY-COTE PAINT, AEROSOL (400ML) RX1432
AVAILABLE IN BLACK OR ALUMINIUM.
POLYURETHANE BUSHES
Polyurethane bushes out-perform standard
rubber bushes and last longer too!
IF YOU REALLY WANT TO IMPROVE THE

HANDLING, THEN POLYURETHANE BUSHES
ARE A GOOD START.
REFER TO LISTINGS THROUGHOUT THIS
CATALOGUE FOR FULL AVAILABILITY.

UPRATED DISCS & PADS
EBC
ACCESSORIES
See page 34-35 for full details. BRAKES
Uprated Discs & Pads (Set);
Type 12 Calipers
EBC Discs & Pads RL1525UR
Rossini Discs & Pads RL1525ROS
Type 14 Calipers
EBC Discs & Pads RL1080UR
Rossini Discs & Pads RL1080ROS
Uprated Discs (pair);
EBC 208715UR
Rossini 208715ROS
‘Green Stuff’ Pads;
Type 12 Calipers GBP166GS
Type 14 Calipers GBP574GS
DISC BRAKE CONVERSION KIT

Disc Brake Conversion Kit RH5029
Our kit includes; 2 Stub Axles (UKC697),
2 Nuts (GHF275), 2 Washers (WC112081),
2 Castle Headed Nuts (LN2212),
2 ‘D’ Washers (102690), 2 Split Pins (PC20),
2 Vertical Links (GSJ265/GSJ266),
2 Tie Rods (211048/ 211049),
4 Bolts (138558 - Link to Tie Rod),
4 Washers (WQ310 for ‘138558’),
2 Front Hubs (146479), 8 Wheel Studs (21H5774),
2 Hub Bearing Kits (RH5027),
2 Brake Discs (208715),
8 Bolts (113150 - Disc to Hub),
8 Spring Washers (GHF333 for 113150),
2 Calipers (159130/159131),
4 Bolts (132439 - Caliper Mounting),
4 Washers (WQ310 for 132439),
2 Brake Dust Shields (213680/213681),
2 Extension Covers (149623),
1 Disc Pad Kit (RH5074), 2 Bleed Screws (601959),
1 Brake Pipe Kit (RH5165),
2 Flexible Brake Hoses (GBH216),
1 Four-Way Connector (136939),
1 Bolt (BH604101 for 136939),
1 Nut (GHF200 for 136939),
1 Plain Washer (GHF300),
1 Locking Washer (GHF331),
2 Rear Wheel Cylinders (GWC1208),
1 Brake Light Switch (134529),
and 1 Litre of Silicone Brake Fluid (RS1454).
ALFIN BRAKE DRUMS BRAKE SERVO KIT
‘ALFIN’ FINNED BRAKE DRUMS FOR

EXTRA COOLING AND INCREASED RESISTANCE
TO FADE. SUPPLIED IN PAIRS. Brake Drum-Alfin (pair) 201246UR Brake Servo Kit RH5272
Remote mounting.
Complete kit ready to improve your stopping power!
(Disc brake vehicles only).
BRAKE HOSE SET - BRAIDED

CLUTCH PIPE - BRAIDED
For a firmer brake pedal.
Stainless Steel braided hoses.
Also available singularly.
Stainless Steel Braided Brake Hose Set;
Car set (4 hoses).
948 & 1200 Drum Models RH5363GR
All Disc Brake Models RH5374GR Stainless Steel Braided Clutch Master
to Slave Cylinder Pipe (RHD) 305936GR

WHEELS SEAT BELTS
ACCESSORIES
STATIC FRONT
SEAT BELT KIT
565722
REVOLUTION ALLOY
WHEEL KITS
INERTIA FRONT
SEAT BELT KIT
See page 32 RH5159
for details.
Front Seat Belt Kit (3-point);

MINILITE REPLICA REAR LAP Saloon, Coupe & Estate
WHEEL KITS BELT KIT Static (per seat) (2 Req) 565722
RS1394
Inertia (per seat) (2 Req) RH5159
Convertible
Static (per seat) (2 Req) RH5221
Inertia (per seat) (2 Req) RH5240
Seat Adjusting Block 608759
Rear Seat Belt Kit (2-point) RS1394
Lap belt, per car.
COMPETITION TYPE HARNESS

A popular alternative to standard seat belts - these really do
look the part!
The 4-point harness shown (no. 1) can be converted to the 6-
See page 32 point type by the inclusion of the crotch strap listed (no. 2).
for details. Note that fittings (eye bolts, reinforcement plates &
bolts/spacer sets) are supplied separately. Harnesses are
WIRE WHEEL supplied singularly in 2” wide red webbing (black or blue
webbing supplied to special order). This harness is designed
CONVERSION KIT for road use - please contact us if you have specific FIA/RAC
approved type requirements.
QTY
REQ.
1 HARNESS, competition type, red
(each) (2) RX1500
2 CROTCH STRAP, red (each) (2) RX1501
3 SHOULDER PADS, ‘Securon’ (pair) (2) RX1502
available in red or black
4 SHOULDER PADS, ‘Triumph’ (pair) (2) RX1414
black
5 EYE BOLT SET (pair) (2) RX1503
6 REINFORCEMENT PLATE SET (pair) (2) 621112
See page 32
7 BOLT & SPACER SET (pair) (2) RX1505
for details.
MUDFLAPS
2
TRIUMPH SHOULDER
PADS RX1414
3 44 55 66 77
Mudflaps (Pair)
Front (Inc. fittings) RH5193F SECURON SHOULDER
Rear (Inc. fittings) RH5193R PADS RX1502

ELECTRICAL
ACCESSORIES
HALOGEN HEADLAMP ALTERNATOR CONVERSION KIT
CONVERSION KIT Alternator Conversion Kit RH5067
Our alternator conversion kit, which is suitable for all
Herald 1200, 12/50 & 13/60 models, comes complete
with all necessary fittings.
NOTE; vehicles must be (or converted to)
negative earth.

Note:- only for use with vehicles fitted with alternator.
RHD (with or without pilot) RB7129
LHD (with or without pilot) RB7082
LHD - France (pilot type) RB7160
KENLOWE ELECTRIC FAN UPRATED HI-TORQUE
Halogen Bulb (100/80w uprated) each GLB484 STARTER MOTOR
Halogen Bulb ‘Xenon’ (60/55w) pair GLB472X
HEADLAMP STONE GUARDS
Fits as direct
replacement.
Kenlowe Electric Fan Kit RH5014 Starts engine regardless
of compression or
temperature.
Headlamp Stoneguards (pair) (Clip on) RR1175 UPRATED These kits offer a
maintenance free Up to 200% more cranking power using up to 50%
IGNITION ignition system,
(in place of contact
less current.
Uprated Hi-Torque Starter Motor
FRONT FOG LIGHTS SYSTEMS points) with potential
for improved
Outright sale, no exchange.
performance and fuel All models GEU9405UR
economy.
BATTERY CONDITIONER
Front ‘Fog light’ (Supplied in Pairs) RX1370
Electronic Ignition Kit;

REAR FOG LIGHT Lumenition
Standard RR1113
Performance (inc coil) RR1113P
Newtronic The battery charger that turns on
Negative earth RF4101 and off, automatically.
Positive earth RF4101P
Suitable for all 12 volt batteries (from 5AH to
100AH), this superb product constantly revitalises
Rear Fog Light/Guard RB7092 the battery cells - helping to extend cell life,
Aftermarket product.
without the danger of overcharging.
Battery Conditioner Kit - RX1410CTEX
DRIVING LAMPS Comes complete with all fittings & operating instructions.
LOOK AT THESE BENEFITS;
Designed to be left connected for long periods.
Use without disconnecting vehicle electrics.
L.E.D. battery condition display.
Thermal cut-out facility.
12 month guarantee.
Can also be used for these applications
providing they use a 12 volt battery;
Silicone Plug Lead Set (Top entry) GHT146S Caravans, lawn mowers, motorbikes, motor boats, wheel
Spark Plug - High Performance chairs and general leisure use.
All (exc 13/60) GSP4366HP
Driving Lamps (pair) RX1556 13/60 GSP6462 BATTERY CHARGER GAC7106
5" dia. Chrome. Sports Coil (performance) GCL110HP Conventional type 6v/12v

MOBILE FRIDGE/ ENGINE BAY BONNET LAMP BATTERY ISOLATER SWITCH
ACCESSORIES
TRAVEL COOLER & ACTIVATION SWITCH
This isolater switch is

simple to fit and features a
removable key.
Battery Isolator Switch LL1171

Ideal for keeping food and drinks cool
in the summer!
Simply plugs into cigar lighter. DIS-CAR-NECT
Fantastic value. Engine Bay Bonnet Lamp DRC2878
Mobile Fridge/Travel Cooler RX1540 Activation (plunger) Switch AAU1908A
POWER SOURCE INVERTOR
‘Dis-Car-Nect’ Starter Immobiliser RX1356

Replacement screw knob RX1356K
Replacement fuse RX1356F
HOW DOES ‘DIS-CAR-NECT’ WORK?

When leaving your car, simply remove the knob to
isolate the starter circuit. The 16 amp by-pass fuse
will maintain current to all other electrical circuits
Great for in car entertainment 150 WATT MODEL RX1551-150
Continuous power: 150w. Peak power: 300w (stereo memories, vehicle alarm etc).
and leisure use! Cigar lighter plug connection. 15A fuse.
Suitable applications: TV, DVD, Video, Computer Consoles,
Because the starter motor draws over 150 amps,
any attempt to connect (hot wire) the starter motor
Lights (not fluorescent) Phone charger etc.
will instantly cause the fuse to blow, immobilising
POWER SOURCE INVERTOR 300 WATT MODEL RX1551-300 the car until the knob is replaced. If this should
A power source invertor converts car battery Continuous power: 300w. Peak power: 660w happen, simply replace the 16 amp fuse at a
voltage (12v) into a 240v output. You can plug in Cigar lighter or battery clip connection. convenient time.
a variety of mains voltage appliances into the 40A fuse.
Suitable applications: as 150w model plus small power For extra security, unscrew and remove the
standard UK socket. tools, small fridges, stereo etc.
Three different invertors are available to suit a immobiliser knob completely, and if you intend to
range of power requirements. There is overload, 500 WATT MODEL RX1551-500 store your vehicle for some time, 'Dis-Car-Nect'
overheat and short circuit protection on all Continuous power: 500w. Peak power: 800w will also prevent battery drain, simply unscrew the
models. Battery clip connection only. 70A fuse. knob and remove the fuse.
Suitable applications: as 300w model plus medium power
tools, colour TV’s with DVD’s, battery chargers etc. Fits all vehicles and is easily fitted to any battery
terminal.
Full installation/user instructions supplied with
AIR HORNS every unit.
PORTABLE WORKLIGHT
Ideal for working on you car or for jobs around the
house. Inc. 240v-500w tungsten halogen lamp,
2m cable and BS plug. INSPECTION LAMP
Air Horns (Electric type) RX1381 Inspection Lamp/Halogen RX1424

Portable Halogen Worklight (500w) RX1263 Twin ‘Compressed - Air’ Horns. Plugs into cigar lighter.

STEERING WHEELS & FITTINGS
ACCESSORIES
MOTO-LITA Motolita Steering Wheel;
MOTO-LITA
WOOD RIMMED - RR1170 Inc. Boss & fittings.
WOOD RIMMED - RR1170 Wood Rimmed MOUNTNEY VINYL RIMMED
13" dia - flat RR1170/13 14" DISHED
14" dia - flat RR1170/14 BLACK SPOKES - RH5358
Motolita Steering Wheel;
Inc. Boss & fittings.
Leather Rimmed
13" dia - flat RR1173/13
14" dia - flat RR1173/14
Mountney Sports Steering Wheel & Boss;

13" Wood Rimmed
Semi-dished RL1466
14" Vinyl Rimmed Dished
with Polished Spokes RH5357
with Black Spokes RH5358
MOUNTNEY
WOOD RIMMED - RL1466 MOUNTNEY VINYL RIMMED
14" DISHED
POLISHED SPOKES - RH5357
MOTO-LITA
LEATHER RIMMED - RR1173
STEERING RACK
SOLID MOUNTING KIT
CONSOLE FACIA
RH5302
Wooden Console Facia:

Radio & Two Gauge Facia RH5302 Solid Mounting Kit (alloy) RR1370
Three Gauge Facia RH5303 Replaces original rubber mountings and clamps. Provides
RH5303 more positive feel to steering. Note: also transmits more
road noise and vibration.
GEAR LEVER KNOBS Gear Lever Knob;

Wood
Leather
RL1528W
RL1528L
TREADPLATE FINISHER
Wood (larger Amco style) RL1528WA
Leather (larger Amco style) RL1528LA
Treadplate Finisher (each) 806598

Screw (7 per finisher) 511546
OVERMATS
Footwell Overmats - Velour (Set of 4) RH5052

Suitable for RHD & LHD models. Front & rear.

MIRRORS Rear View Mirror 612162
ACCESSORIES
Door Mirror;
Chrome (flat type glass)
RH GAM211
LH GAM212
Chrome (convex glass)
RH GAM213
LH GAM214
Black
RH GAM261
LH GAM262
‘Bullet’ Style (RH or LH) GAM105
Wing Mirror (chrome);
Arm only RH5284
Mirror Head (retangular)
Flat Glass RH5286
Convex Glass RH5285
WING Mirror Head (round)
MIRROR Flat Glass RH5288
HEADS Convex Glass RH5287 ‘BULLET’ STYLE MIRROR
Quarterlight Mirror GAM115 GAM105
DESCRIPTION QTY REQ. PART No.

WIND DEFLECTOR
Do you enjoy driving

with the hood down?
If so, then your motoring pleasure can be
further enhanced with our range of SISA wind
deflectors.
It effectively stops the buffeting you receive
from air being forced back into the cabin -
year round open top driving is suddenly an
option! Easy to fit and remove.
Wind Deflector RH5297
DIECAST MODELS
REFER TO PRICE GUIDE OR WEB SITE
USING PART NUMBER RH5301
TO CHECK ON LATEST AVAILABILITY
AND SPEC
Die Cast Model Cars - 1/18 Herald;
Refer to Price Guide or Web Site for availability,
scale size, colour & dress.
Listings below were available at the time of printing.
Others may be available.
Last of the Summer Wine RH5301-04
White Convertible RH5301-02
Red and White Saloon RH5301
Light Blue Saloon RH5301-06
Dark Blue Convertible RH5301-03

GENERAL VEHICLE NUMBER
ACCESSORIES
CHASSIS PLATE VALVE CAPS
PLATES
Valve Cap Set, Triumph HMP190129

STANDARD
BASEBALL CAP
Chassis Plate RH5273
VEHICLE RECORD LOG

& HANDBOOK WALLET DELUXE-3D
BLACK - PRESSED ALUMINIUM
‘Rimmer Bros’ Baseball Cap RX1425
KEY RING
BLACK - ACRYLIC
Glovebox Wallet/Folder RX1421

Look & Be Organised.
This wallet is ideal for holding your owners handbook,
service/MOT log, invoices & MOT certificates.
BLACK - ACRYLIC (ENGRAVED)
ONLY AVAILABLE TO PERSONAL CALLERS.

New legislation from 1/1/03 states that number
Key Ring/Fob;
plates can only be sold directly to the owner of
‘Triumph Laurel’ RM8194
the vehicle together with proof of ownership and
‘Triumph Shield’ RF4109
personal identification.
VOUCHERS We will need sight of the following three

original documents:-
G Vehicle registration document (V5)
G Driving Licence or utility bill.
G Passport or credit card (with photo ID), or
travel/works pass (with photo ID).
Service/MOT Record Log RX1422 Number plates are made to special order.
A visible service record of your classic.
Use this log book for keeping a full record of your classics Please note that it is also now mandatory in the UK for all
service, tax & MOT dates. new number plates to bear the originating suppliers name,
Over the years the historic record will prove to any potential postcode and telephone number (i.e. Rimmer Bros).
purchaser how you have cared for your car.
Vehicle Number Plate - Front;

Standard NPF
COFFEE MUG Standard with ‘GB’ logo
Deluxe - 3D Effect
NPFGB
NPF3D
Deluxe - 3D Effect with ‘GB’ logo NPF3DGB
Vehicle Number Plate - Rear;
Standard NPR
Standard with ‘GB’ logo NPRGB
Deluxe - 3D Effect NPR3D
Deluxe - 3D Effect with ‘GB’ logo NPR3DGB
Vehicle Number Plate (Pair) - Black;
Black background, Silver letters
Legal on Vehicles Reg. to 1/1/73 .
Pressed Aluminium (PR) RX1365
Acrylic - Standard Letters (PR) RX1365B
Rimmer Bros ‘Vouchers’; Acrylic - Engraved Letters (PR) RX1365A
Vouchers make an ideal present for Classic car owners.
£5.00 value RX1337
£10.00 value RX1338 Fitting Kit - Number Plates NPK
Universal kit including 4 self tap screws, 2 white cups,
£20.00 value RX1339 2 yellow cups & 8 double sided adhesive pads.
‘Triumph’ Coffee Mug RX1264 £50.00 value RX1341

ADVERTISING PRINTS DECALS & BADGES
ACCESSORIES
Reproductions of Original
Triumph adverts.
We have available a good selection of full
colour advertisements/posters as released
by Triumph - British Leyland, representing
adverts used Worldwide.
Light Blue Convertible Herald RH5365
Picture: Stripped down car and converticle car been driven
on a London street.
Caption: The Triumph Herald is not just a pretty facade (it has a steel
backbone).
White Herald RH5367

Picture: The car with door, bonnet & boot open been searched. RH5365
Caption: The Triumph Herald 1200 hides nothing.
Red Herald RH5368

Picture: A Herald been parked in a tight space.
Caption: ‘The Cosy Parker
‘Union Jack’ Badge (30 x 50mm)
Light Blue Convertible Herald RH5366 Enamel RX1299
Picture: A car and lady sunbathing on a beach. Stick-on RX1299S
Caption: ‘The Triumph Herald Convertible or how to discover that
motoring can still be fun. Grille Badge ‘T. S. O. A’ HMP121001
‘Triumph Sporting Owners Association’
Two Tone Herald RH5369 Cloth Badge ‘BL Motor Sports’ HMP190078
Picture: Car at the harbour with a Hovercraft in the background. ‘Sew-on’ product.
Caption: Only a hovercraft has more independent suspension than a
Triumph Herald.
Green Herald 13/60 RH5042 TRANSFERS

Picture: Car and couple visiting a boat yard.
Caption: When other cars are in for the day you’re out for the day
in the new high-performance Herald 13/60.
RH5367
‘Triumph Laurel’ Leaf Transfer - Large (200mm dia)

Popular application - Bonnet
Black XKC3700
Gold XKC3702
Silver XKC3701
Red RB7222
‘Triumph Laurel’ Leaf Transfer - Small (50mm dia)
Popular application - Front Wing
Black, Gold or Silver RB7178
RH5366 TAX DISC HOLDER

RH5368 FREE
Tax disc holder (Free of charge) RX1355
DECAL
RH5042 Decal ‘Rimmer Bros’ RA1055

RH5369 Black/Silver, Self adhesive.

TOOLS
ACCESSORIES
Oil Filter Strap Wrench RX1514
For cartridge (spin-on) type filter.
Spark Plug Spanner GAT140
Rear Hub Puller RX1542 Spring Compressor Tool RX1328A
Door Gap Adjusting Tool RX1543 Wheel Nut Brace 21A2818
Bolts between ‘A’ and ‘B’ posts to maintain correct door
aperture size when replacing sills or repairing chassis. Scissor Jack & Handle 311346
Valve Spring Compressor Tool Door Weatherstrip Clip Tool RX1562
Overhead Valve Models RX1226OHV Hood Popper Fixing Tool RX1342
For mating Male and Female Poppers on Hood
Grease Gun RX1423 and Tonneau Covers
Clutch Alignment Tool RX1385 Eyelet Tool (Tonneau Covers) RX1384
HOOD CARE A range of products to clean, renovate and

protect your hood cover, tonneau cover or
hood stowage cover, whether made from vinyl,
canvas or mohair material.
Vinyl Top Cleaner (500ml) RX1529

Dry Cleaner Shampoo -
Canvas/mohair (300ml) RX1530
Soft Top Reviver - Canvas/mohair
Available in black, blue & brown.
500ml size RX1525
1 Litre size RX1524
Ultra Proofer - Canvas/mohair
500ml size RX1527
1 Litre size RX1526
Ultra Proofer - Vinyl (500ml) RX1528
Plastic Window Polish
30ml size RX1531
100ml size RX1532
GENERAL CONSUMABLES
Latex/Rubber Gloves (Pack of 100) RX1406

Ideal for those really dirty maintenance jobsExhaust
Joining Compound GCH112
Copper Ease (Tube) (Anti-Seize Grease) (95g) RX1345
Brake Rubber Grease 514578
Brake Cleaner (Aerosol) GBF901
Loctite (Tube)
24ml GAC100-24
3ml GAC100-3
WD-40 (Large 400ml) GAC111 Adhesive (Trim/Carpets)
Wonderweld (Holts) RX1539 1 Litre Tin RX1353
Radweld (Holts, 250ml) RX1508 370g Aerosol RX1353A
Easystart (Bradex) RX1511 Seam Sealer (Canvas Hoods) RX1257
Silicone Sealant (Tube 80ml) GHF6093 Waterproofing – Hood Material
Hylomar (Gasket Sealant) (100g) GGC102 Clear 1 Litre RX1373

CAR STORAGE
ACCESSORIES
CAR-CAPSULE
The dry solution for car storage problems.
Car-Capsule practically eliminates the problems of dust, dirt, scratched
paintwork & moisture retention, which can lead to corrosion problems.
Quick and very easy to use, Car-Capsule is suitable for both long and
short term storage.
The energy efficient (low-voltage) fan maintains a continuous flow of
filtered air passing over and through the stored vehicle.
Car-Capsule helps prevent interiors from becoming damp & musty during
storage.
Herald Car-Capsule (420x160cm) RX1401

Also available in;
480x180cm (RX1402) & 540x200cm (RX1404) sizes.
OUTDOOR ‘MONSOON’ SEMI-TAILORED CAR COVERS

FEATURES...
Tough grey outer skin
Soft non woven lining
Double stitched with heated seams
Roof vents allowing moisture to escape
Under body securing straps with soft fastener
covers
Elasticated front & rear hems for snug fit
Our range of semi-tailored outdoor car covers offer total protection with a UV resistant to prevent paint fade
range of sizes to suit all applications. Complete with zipped storage bag
Spitfire, GT6, TR2 & 3 RX1516
TR4 - 6, TR7 - 8, Dolomite, Herald, Vitesse RX1517 Great value for money!
Stag RX1518
2000/2500 saloons, Rover SD1
Extra large - Range Rover etc
RX1519
RX1520 TOTAL PROTECTION!
INDOOR TAILORED CAR COVERS

Cover It up !
Look at these features ...
Breathable Cotton material.
Available in red, blue & green.
Excellent tailored fit.
Superb Value for Money.
Embroidered Model Name/Logo.
Supplied with FREE Storage Bag.
Manufactured in the UK.
These quality tailored indoor car covers are exclusive to Rimmer Bros, and have been individually designed for each model to ensure a really close fit. They are
manufactured to our specification in a 'Breathable Sateen Cotton' material that is strong, but yet light in weight, making them very easy to fit.
They will provide ideal protection whilst your car is in the garage - whether just parked up for a few days, or stored over the winter months - from dust, bright sunlight
and from those annoying little marks when people brush past. The covers, which are available in a choice of colours, are supplied with a matching storage bag.
This product is manufactured Solely in the United Kingdom. Available in Blue, Red & Green.
Herald ‘Sateen’ Car Cover; Saloon RH5177, Convertible RH5128

LUBRICANTS & FLUIDS UNLEADED
ACCESSORIES
ENGINE OIL
FUEL ADDITIVES
ENGINE OIL CAPACITY

(INC FILTER) 4.7 LITRES.
Unipart (20W/50) Castrol Running In Oil

4.55 Litre/1 Gallon GGL104 4.55Litre/1 Gallon RX1417
Duckhams Q (20W/50) Castrol Classic XL (20W/50)
4.55 Litre/1 Gallon HMP190100 4.55 Litre/1 Gallon RX1363
Unipart (10W/40) Semi-Synthetic
Bottled additives are available which
Duckhams Q Storage Oil
4.55 Litre/1 Gallon HMP190104 5 Litre GGL657 can be mixed with either ‘Premium’ or
‘Super’ unleaded depending upon
application. It usually works out
GEAR OIL BRAKE/CLUTCH FLUIDS cheaper to use bottled additives than
leaded or LRP - work it out for yourself!
Castrol Valvemaster
250ml RX1407VM
Castrol Valvemaster Plus
250ml RX1407VMP
Endorsed by the federation of British Historic

Vehicle Clubs (FBHVC), having been
independently tested and approved, both
products offer a high level of protection against
valve seat recession under all driving conditions.
In addition, castrol valvemaster plus provides an
octane boost to premium unleaded petrol which
reduces pinking or knocking on high
compression or performance applications. This
also usually avoids the need to re-tune your
Unipart (EP90) 0.5 Litre GGL190 Standard (DOT 3) 1 Litre GBF103 engine. Treats 250 litres of petrol.
CAPACITIES; Silicone;
GEARBOX 0.9 LITRES 0.5 Litre* RX1327
DIFFERENTIAL 0.6 LITRES
1 Litre* RX1326
*Do not mix with standard fluid. OIL JUGS
ANTIFREEZE
GREASE & LUBE
Lithium Grease (Multi-Purpose) Castrol Oil Jugs

Anti-Freeze; Unipart 0.5 Litre (Tube) GGL111 1/2 Pint RX1395
1 Litre GAC2018 1 Pint RX1396
Brake Rubber Grease 514578
5 Litre GAC2019 Cam Lube (for assembly) RX1358 2 Pint RX1397
COOLING SYSTEM (INC HEATER) 6.25 LITRES. All Three Jugs RX1398

BODY CARE
ACCESSORIES
AUTOGLYM CAR CARE PRODUCTS
Autoglym Car Care Pack RX1510
includes items marked *
Silicone Resin Polish (325ml)* RX1312
Bodywork Shampoo/Conditioner (500ml)* RX1313
Car Interior Shampoo (500ml)* RX1314
Glass Polish (325ml)* RX1315
Cutting Polish (325ml)* RX1316
Ultra Deep Shine (500ml) RX1558
Extra Gloss Protection (325ml)* RX1317
Bumper Care (325ml)* RX1318
Vinyl & Rubber Care (325ml)* RX1319
Leather Care Cream (325ml)* RX1320
Superglym Chrome Polish (55ml)* RX1321
Clean Wheels (500ml)* RX1322
Perfect Polishing Cloth (21sq ft)* RX1323
Aqua Dry (Synthetic Chamois)* RX1324
Clean Machine (1 Litre)* RX1325
Hood Care & Maintenance Kit RX1433
Alloy Wheel Seal (Silicone spray) RX1443
Instant Tyre Dressing RX1368
Intensive Tar Remover RX1367
OTHER CAR CARE PRODUCTS
Sponge RX1415
Wash Leather RX1416
FINNEGANS ‘ANTI-CORROSION’ WAXOYL ‘CONCOURS’

Waxoyl Starter Kit RX1032 SPECIALIST
Inc. RX1028, RX1030, RX1031
WHEEL
CLEANER
The ‘Concours’ specialist wheel cleaning system

will help you care for your Classic’s wheels.
Suitable for all Steel, Alloy and Wire wheels (including
painted & chromed), ‘Concours’ wheel cleaning system uses
a unique 2-stage process that not only cleans, but gives
Waxoyl; wheels a superb lasting finish that helps to protect them,
5 Litre Can RX1027 making them easier to care for and clean in the future.
2.5 Litre Can RX1029
2.5 Litre Cartridge RX1028 ‘Concours’ Wheel Cleaning Kit - RX1405
Trigger Spray Gun RX1033 Kit includes;
High Pressure Spray Gun RX1030 G Special cleaning solution (580ml).
Use with 2.5 litre cartridge
Extension Probe RX1031 G Wooden handled cleaning brush & dispenser.
Use with high pressure spray gun G Finishing/protection solution (180ml)
Aerosol (400ml) RX1026 G 2 pair of disposable gloves.
Aerosol (200ml) RX1025 Cleaning solution breaks down brake
Underbody Seal; dust & road grime. Brush & dispenser gets into all
1 litre RX1024 those awkward places.
500ml RX1023 Finishing/protection solution leaves wheels like new.
ROADSIDE TOOLS & TOURING EQUIPMENT

Tow Bar only 509675
Less tow ball & electrical fittings
Tow ‘Ball’ only (50mm) GTT101
Cover (Tow ball) GTT308
‘AA’ Membership & Relay Pack RX1329
Lightweight (Disposable) Overalls;
Ideal for those roadside repairs.
Keep a pair of these very handy lightweight general purpose
overalls in the boot, you never know!
Medium (approx. 47” chest) RX1408M
Large (approx. 51” chest) RX1408L
Extra large (approx. 55” chest) RX1408X
‘Warning’ Triangle RX1344
Safety Jacket (Luminous) GAC2999
Be Safe - Be Seen.
Rubber Disposable Gloves RX1406
Supplied in packs of 100.
They keep your hands clean & help protect your skin.
Tool Bag only (For jack etc) 725793
Scissor Jack & Handle 311346
Wheel Nut Brace 21A2818
Foot Pump GAT347
‘First-Aid’ Kit RX1399
Fire Extinguisher GAC9904

HAND CLEANERS
ACCESSORIES
HICLEAN THE HANDY HAND CLEANER
Hiclean, the handy hand cleaner is a BEFORE
novel and unique hand cleaner that
cleans dirty hands quickly without
water, soap or towel - ideal for use in
any situation! It also moisturises
hands and disinfects.
Simply apply the gel to your dirty HI-TEMP SHRINK TUBES HT LEAD & SPARK
These shrink tubes are already supplied with
PLUG PROTECTION
hands and gently rub together until
the gel dries and the dirt rolls up and the HT lead kits listed on previous page. They
falls off.
Hiclean Handy Hand Cleaner may be AFTER can also be used for many other applications Protect your HT leads and spark plugs from
used repeatedly and is perfectly safe such as an enhanced appearance to any hose or extreme heat and improve the appearance of
on cut hands. It kills pathogens wire, bundle wires as alternative to plastic ties
associated with animals and is your engine bay with these top quality
suitable for use before meals.
or protecting electrical connections. Available in products. Ideal for tubular extractor manifold
Available in tubes or sachets, Hiclean grey, black, red, blue and in 2 sizes, with a applications where additional heat is
Handy Hand Cleaner contains no shrink ratio of 3 to 1. Easily installed with naked generated, but may be fitted to a standard
perfume and is therefore appropriate flame. 18mm size shrinks to 6mm and 12mm
to use when animals are present. vehicle.
size shrinks to 4mm. Supplied in packs of 25.
G Cleans your hands in any situation Note: For Manifold insulation wrap, refer to
G Moisturises, freshens & disinfects HI-TEMP SHRINK TUBES; ‘Exhausts’ in relevent catalogue.
G Always keep some handy - toolbox, car or anywhere! 18mm dia x 38mm long( Pack of 25) RX1468
Hiclean Handy Hand Cleaner; 12mm dia x 38mm long (Pack of 25) RX1469
40g Tube RX1549T
1.5g ‘one-use’ sachet RX1549S
HICLEAN LIQUID GLOVES SPARK PLUG SLEEVES

Hiclean Liquid Gloves is a highly effective barrier cream. Manufactured from a fibreglass composite
Simply smother your hands with Liquid Gloves before material (no arcing), the sleeves slide over the
work commences. To clean, quickly rinse your hands
under a cold tap and all the dirt, grease, ink etc simply ends of the HT leads, easy installation. Available in
comes off. Liquid Gloves moisturises hands and stops the silver, black, red or blue.
pores becoming blocked with dirt. It prevents cracking, THERMAL HEAT SLEEVES SPARK PLUG SLEEVES
chapping and ingrained dirt. This high temperature sleeving will protect
2 cylinder kit RX1462
G Quick & easy to use wiring, HT leads, hydraulic hoses and coolant Order 2 kits for 4 cylinder, 3 kits for 6 cylinder.
G Prevents ingrained dirt hoses from radiant heat. Two different designs 8 cylinder kit RX1463
G No need for hot water, soap or chemicals are offered. The fixed tube type is designed to
G Moisturises, prevents cracks and chapping. slide over wiring/hoses whereas the velcro
Hiclean Liquid Gloves (40g Tube) RX1550T type can be easily installed without having to
disconnect anything. Easy to cut and shape to
suit. Supplied in 3ft lengths.
FIXED TUBE SLEEVE RX1471
Supplied in diameters of 0.5", 0.75", 1", 1.25", 1.5"
(all 3ft long)
VELCRO SLEEVE RX1472
Supplied in 1 size - 0.5"-1.5" diameter (3ft long).
HT LEAD SLEEVES
Made from the same material as the spark plug
sleeves - these easy install, snug - fitting sleeves
COOL TAPE will fit any HT lead up to 10mm in diameter. Also
Consists of a 1mm aluminised material bonded included are hi-temp shrink tubes for a sharp
to a lightweight, woven fibreglass with super finished appearance. Available in silver, black, red or
strong adhesive backing. Reflects radiant heat. blue.
Limitless application, but common uses include HT LEAD SLEEVES
wrapping cables, hoses, fuel lines, ‘spot’ heat 2 cylinder kit RX1464
retardation areas and sealing gaps in floors or Order 2 kits for 4 cylinder, 3 kits for 6 cylinder.
firewalls.
The best product on the market! Flexible, 8 cylinder kit RX1465
strong adhesive and thin for a tight wrap.
COOL TAPE RX1474
Available in 13/8" x 15', 13/8" x 30' and 2" x 60' rolls
HEAT & SOUND INSULATION

Designed for insulating floors, bulkheads, HT LEAD & SPARK PLUG
transmission tunnels and many other applications SLEEVE KIT
from the effects of heat, road noise, engine and These kits comprise of both kits listed opposite in
transmission noise. Made from an aluminium face one convenient (and cost effective) kit. Colour
bonded to a 1/8" composite fibreglass insulation, matched sleeves available in silver, black, red or
UNIVERSAL HEAT SHIELD then backed to an aggressive adhesive. Tough blue.
This multi-purpose heat shield can be used to enough for under vehicle applications and harsh
protect starter motors, carbs, fuel pumps, HT LEAD & SPARK PLUG SLEEVE KIT
environments where high heat can be a problem. 2 cylinder kit RX1466
electrical boxes, instruments and hydraulic Can also block out up to 50% of unwanted noise. Includes 7ft of HT lead sleeve,
cylinders from intense heat. Easily cut to shape Self adhesive, can be cut with tin snips to any 2 plug sleeves & 6 shrink tubes.
(scissors or knife) it attaches to itself with velcro shape. Order 2 kits for 4 cylinder, 3 kits for 6 cylinder.
material. Simply cut off excess material. INSULATION MATERIAL RX1473 8 cylinder kit RX1467
UNIVERSAL HEAT SHIELD Supplied in 3 sizes: 2' x 21" (3.5sq ft), 4' x 21" (7sq ft), Includes 25ft of HT lead sleeve, 8 plug sleeves
7" wide x 24" long RX1470 4' x 42" (14 sq ft). & 25 shrink tubes.

CD ROM, BOOKS & VIDEOS
ACCESSORIES
G FACTORY PARTS CATALOGUES
ORIGINAL TECHNICAL G WORKSHOP MANUALS
PUBLICATIONS ON CD ROM G DRIVER’S HANDBOOKS
Compiled from the archives of the Heritage
Motor Centre using original factory data, a CD
ALL ON ONE CD ROM!
PARTS PUBLICATIONS OWNERS’ LITERATURE
Rom is now available for Herald & Vitesse which Herald 948 Saloon & Coupe 1959 to 1962 - Herald Saloon 1959 to 1960 - Owner’s Handbook 508910
Spare Parts Catalogue 508073 Herald Saloon, Coupe & Convertible 1960 to 1962 -
combines all the factory publications of Parts Herald 948 Convertible - Spare Parts Catalogue Sup 508073/S1 Owner’s Handbook 508515
Catalogues, Workshop Manuals and Driver’s Herald 948 Saloon - Spare Parts Catalogue Sup 508073/S2 Herald Sedan 1959 to 1962 - Owner’s Handbook (USA) 508925
Herald 948 Saloon & Coupe 1959 to 1962 (USA) - Herald Sedan 1959 to 1962 - Owner’s Handbook (USA) 508924S
Handbook - all on one CD! Spare Parts Catalogue 508073/USA Herald Coupe’ & Convertible 1959 to 1962 -
The CD Rom includes all the publications for all Herald 1200 & 12/50 1961 to 1970 - Spare Parts Cat 510597 Owner’s Handbook (USA) 508925
Herald 1200 Estate - Spare Parts Catalogue Sup 510597/S1 Herald Coupe’ & Convertible 1959 to 1962 -
years of production - in easy to print pdf format. Herald 1200 Convertible - Spare Parts Catalogue Sup 510597/S2 Owner’s Handbook (USA) 508924C
Also included are details about the Heritage Herald 1200 Courier - Spare Parts Catalogue Sup
Herald 12/50 Courier - Spare Parts Catalogue Sup
510597/S3
510597/S4
Herald 1200 1961 to 1962 - Owner’s Handbook
Herald 1200 Saloon & Estate 1961 to 1962 -
511212
Motor Centre and the British Motor Industry Herald 1200 & 12/50 1961 to 1970 - Parts Fiche RTC9817FA Owner’s Handbook 510313
Heritage Trust along with pdf reader software Herald 13/60 1967 to 1971 - Spare Parts Catalogue
Herald 13/60 1967 to 1971 - Parts Fiche
517056
RTC9821FA
Herald 12/50 1963 to 1964 - Owner’s Handbook 512168
Herald 1200 & 12/50 1961 to 1970 - Owner’s Handbook 512893
for those requiring it. Vitesse 1600, 2 Litre Mk I 1962 to 1968 - Herald 13/60 1967 to 1969 - Owner’s Handbook 545037
Available for the first time, it represents superb Spare Parts Catalogue 511408
Vitesse 1600, 2 Litre Mk I 1962 to 1968 - Parts Fiche RTC9816FA
Herald 13/60 1970 to 1971 - Owner’s Handbook
Vitesse 6 1962 to 1966 - Owner’s Handbook
545037
511236
value for money - an excellent saving if you Vitesse 2 Litre Mk II 1968 to 1971 - Spare Parts Catalogue 517786 Vitesse 2 Litre Mk I 1966 to 1968- Owner’s Handbook 545006
Vitesse 2 Litre Mk II 1968 to 1971 - Parts Fiche RTC9823FA Vitesse 2 Litre Mk II 1968 to1971 - Owner’s Handbook 545070
were purchasing all three publications in paper
format! SERVICE PUBLICATIONS
Herald 948 1959 to 1962 - Owner’s Repair Manual -
In addition, certain publications are out of print, Herald 1200 1961 to 1970 - Owner’s Repair Manual -
so this CD can now give access to original Herald 1961 to 1970 - Workshop Manual 511243
Herald & Vitesse, 1959 to 1971 HMCC7008
GT6 Mk I, Mk II, Mk III - Workshop Manual 512947
factory data for the first time in many years.
TRIUMPH VIDEOS
Produced by The British Motor Industry
Heritage Trust (BMIHT), these videos are
compiled from archive footage from the
past and remind us of how things used to
be! Very entertaining.
THE TRIUMPH MARQUE RX1436

This video shows the STANDARD-TRIUMPH film unit at its
best, following the fortunes of rally and race teams, it
covers the major successes of the Standards, TR’s and
Spitfires from 1953 to 1968 and the introduction of the TR5.
Footage of the 25th Monte Carlo Rally is also included.
TRIUMPH HERALD RX1437
This video includes the launch of the Triumph Herald in the
WORKSHOP MANUALS WORKSHOP MANUALS Albert Hall, the gruelling test journey across Africa and
footage of the Canley production factory. Raymond Baxter
(FACTORY) (HAYNES) adds the informative commentary.
TR4/TR4A 510322 TR2-4A RF4128

TR5 Pi Supplement 545053 TR6 RR1020
TR6 545277 TR7 RB7210
TR5/TR250/TR6 (Pocket size) 545277HBS Stag RS1401
TR7 AKM3079B Spitfire RL1222
TR8 AKM3971 GT6/Vitesse RG1001
Stag AKM3966 Herald RH5194
Stag - Engine Service Manual Triumph FWD (1965-73) Autodata RX1292AD
(Pocket Size) RS1542 Dolomite 1300 RT1250
Spitfire Mk1/2/3 511243 SD1
Spitfire MkIV 545254 2000/2300/2600 RO1068
Spitfire 1500; 3500 RO1069
Hard Cover AKM4329HCVR 2300/2600/3500 (exc EFi)
Soft Cover AKM4329SCVR Autodata RO1069AD
Spitfire (Pocket Size) RL1395 Carburettor Manual RX1412
GT6/Vitesse 512947 Weber, Zenith, Stromberg.
Herald 511243 Range Rover (1970-92) RA1007
Dolomite Sprint AKM3629 LEYLAND CARS OF THE 70’s RX1442
Dolomite Sprint - A celebration of those wonderful films made to launch
Repair operation times AKM3635 some famous cars of the golden years at British Leyland.
Triumph 2000/2500 AKM3974 Includes footage of the Maxi, Marina, Allergo and Princess.
SD1 (1982 on) AKM5343 (62 minutes in total).

BOOKS
ACCESSORIES
PARTS BOOKS -
‘BRITISH LEYLAND’
TR2/3 501653SC
TR4 510978
TR4A 514837
TR250 516914
TR5 516915
TR6 (to 1973) 517785A
TR6 (1974 to ’76) RTC9093A
TR7 (1975 – 78) RTC9814CA
TR7 (1979 on RTC9828CC
TR7/8 (to ’79) RTC9020B
Stag 519579
Spitfire (‘4’ Mk1 & Mk2) 511682
Spitfire (Mk3) 516282
Spitfire 1500 (Late) RTC9819CB
GT6 (Mk1 & Mk2) 515754
GT6 (Mk3) 520949A
Herald (1200 – 12/50) 510597
Herald (13/60) 517056
Vitesse (1600/2000 Mk1) 511408
Vitesse (2 Litre Mk2) 517786
Dolomite (All Models) RTC9822CB
Triumph 1500 (RWD) RTC9019A
OWNERS HANDBOOKS
TR4 510326
TR4A 512916
TR250 545033
TR6 545078
See catalogue for full listings
TR7 USA (1977) RTC9209-77
TR7 (Coupe 77–81) AKM4332
TR7 (‘81 on inc. conv.) AKM4853
TR8 AKM4779
Stag 545105
Spitfire Mk3 545017
Spitfire MkIV 545220
Spitfire 1500 RTC9221
Spitfire 1500 (USA) AKM4544
GT6 (Mk1) RG1293
GT6 (Mk2) 545057
GT6 (Mk3) 545186
Herald (1200 & 12/50) 512893
Herald (13/60) 545037
Vitesse (1600 Mk1) 511236
Dolomite Sprint 545601
Triumph 2000/2500 AKM3617
SD1 - Refer to catalogue

BOOKS
ACCESSORIES
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
40
39
33 34 35 36 37 38
REFERENCE / INFORMATION BOOKS

1 Original Triumph Stag - 17 2000/2500 Road Test Book RM8226
‘Restorers Guide’ RS1694 (Brooklands) 100 pages
(James Taylor). 96 pages. 190 colour photos. Advertising Triumph –1947-1981
2 Original TR2/3/3A RF4125 (Daniel Young). 96 Pages.
(Bill Piggot) 128 pages 18 Saloon Cars RX1304
3 Original Triumph TR4/4A/5/6 RX1294 19 Sports Cars RX1303 41 42 43
(Bill Piggot) TR4/5/6 112 pages
20 Essential Triumph TR2 – 8 RX1357
4 Original Triumph TR7 & TR8 RB7688 (Bayview Books). 80 pages
(Bill Piggot) 128 pages. 200 colour photos 21 Triumph TR’s: The Complete Story RX1296
5 ‘Original’ Range Rover (1970-86) RA1226 (Robson). 192 pages
(James Taylor) 22 Triumph Sports Cars – 1967-74RX1269
31 SD1 - The Complete Story RO1129 40 Spitfire Mk3, IV, 1500
6 Triumph Cars: (Road & Track) 90 pages
(Karen Pender) 192 pages. Workshop Manual (Glovebox size) RL1637
The Complete Story RX1388 23 Dolomite Portfolio* RT1227 32 Practical Classics on Herald (Practical Classics reprint, 186 pages).
(Robson & Langworth). 352 pages *Road Tests/Spec’s, Performance Data, new model
instructions, long term reports, rallying, touring, & Vitesse Restoration RH5300 41 Triumph TR’s: Collectors Guide RX1295
7 How to restore - plus buyers guide. (Brooklands). 76 pages. (Graham Robson). 128 pages.
- Triumph TR5/250 & TR6 RX1497 24 The Rover V8 Engine RX1429 33 Triumph Herald 59-71 42 Collectors Guide (Spitfire & GT6) RL1417
Paperback, 192 pages with over (David Hardcastle) 208 pages. (Graham Robson).
300 photographs and illustrations. Road Test Book RH5299
(RM Clark - Brooklands).100 pages.
- Triumph TR2/3/3A RX1553 25 Tuning Rover V8 Engines
(David Hardcastle) 208 pages.
RX1430 43 How to Restore TR7 & 8 RB7694
34 Triumph Vitesse 62-71 (Roger Williams). 176 Pages.
8 Triumph - The Sporting Years RX1428 26 SD1 - Road Test Book 100 pages. Road Test Book RV6117 - DIY Guide - Spitfire, Herald, GT6 &
(Bill Piggot) 160 pages (RM Clark -Brooklands).100 pages.
(3500 & Vitesse 1976-86) RO1070 Vitesse (Haynes) Not shown RL1418
9 2000/2.5Pi The Complete Story RM8221 27 Range Rover- 35 ‘Road & Track on Triumph
(Robson) 200 pages Sports Cars 74-82 RX1439 - Triumph TR:
Purchase & Restoration Guide RA1070 (Brooklands). 88 pages. Haynes Great Cars Series RX1523
10 Spitfire/GT6 Informative (David Pollard) (Bill Piggot) Not shown.
Guide to Origins RL1479 28 Range Rover - The Complete StoryRA1319 36 TR2 & TR3 Gold Portfolio 52-61RW3033
(By John Thomason) 158 pages
(James Taylor) (RM Clark - Brooklands).172 pages. - Triumph Illustrated Buyers Guide RX1387
Not shown
11 Stag Portfolio* RS1525 Note: refer to Range Rover catalogue for other titles.
37 Spitfire Competition Prep
12 TR4/5/250 Road & Track RF4114 29 Triumph Cars in America RX1506 Manual RL1638 - The Works Triumphs -
(Michael Cook) (RW Kastner). 64 pages. 50 years of Motorsport RM8227
13 TR6 Portfolio* RR1325 (Robson) 296 pages.
30 How to Restore TR4 & TR4A RX1509 38 GT6 Competition Prep Manual RG1294
14 TR7/8 Gold Portfolio* RB7207 (Roger Williams) 192 pages. Soft cover. (RW Kastner). 28 pages.
* Please note: Certain books may be out of print and
15 Spitfire Portfolio* RL1390 39 Triumph Sports Cars RX1507 are shown for illustration purposes.
(William Krause). 96 pages
16 GT6 Portfolio* RG1140

PAINTS - Aerosols & Touch-in Tins HERALD BODY PAINTS
PAINT
COLOUR/TYPE BL COLOUR CODE AEROSOL TOUCH-IN
(BRUSH IN CAP)
BODY COLOURS
White 19 RX4009A RX4009B
Damson Red 27 RX4057A RX4057B
Signal Red 32 RX4065A RX4065B
Cherry Red 22 RX4056A RX4056B
Sienna Brown 23 RX4053A RX4053B
Saffron Yellow 54 RX4066A RX4066B
Jasmine Yellow 34 RX4059A RX4059B
GENERAL APPLICATION (Aerosol) ENGINE PAINT Conifer Green 25 RX4071A RX4071B

Black - High Gloss (400ml) RX4070A Engine Paint (High Heat)
Black - Matt (500ml) RX1266 Black (400ml) (Aerosol) RX1432A Laurel Green 55 RX4060A RX4060B
Black - Satin (500ml) RX1538 Aluminium (400ml) (Aerosol) RX1432AL
Silver (Suitable for Wheels) (450ml) RX1265 Brush-on (125ml) (Tin) RX1432B Royal Blue 56 RX4063A RX4063B
Lacquer - Clear (Suitable for Wheels) (400ml) RX1261
CHASSIS PAINT
PRIMER (Aerosol) Chassis Paint (For general touch up) Wedgewood Blue 26 RX4064A RX4064B
White (150ml) RX4048A Black Brush-on (125ml) RX4070B
Red Oxide (150ml) RX4049A Valencia Blue 66 RX4072A RX4072B
Grey (150ml) RX4047A
HARDWARE & FASTENERS

BOLTS
BOLTSAND
ANDSCREWS
SCREWS BOLT LENGTH SCREW BOLT LENGTH SCREW
GENERAL 3/8" UNF (24tpi)

Hexagon Headed 9/16" A.F. Spanner Size
-
-
3/8"
1/2"
SH606031
SH606041
1/4" UNC (20tpi)
- 3/8" SH504031
HARDWARE
- 1/2" SH504041
- 5/8" SH606051 - 5/8" SH504051
- 3/4" SH606061 - 3/4" SH504061
- 7/8" SH606071 - 7/8" SH504071
& FIXINGS 3/16" UNF (32tpi)
BOLT LENGTH SCREW
BH606081
BH606091
BH606101
1"
1 1/8"
1 1/4"
SH606081
SH606091
SH606101
-
BH504091
-
1"
1 1/8"
1 1/4"
SH504081
SH504091
SH504101
Following is a listing of common fasteners. - 3/8" HU503 BH606111 1 3/8" SH606111 BH504111 1 3/8" SH504111
- 1/2" HU504 BH606121 1 1/2" SH606121 BH504121 1 1/2" SH504121
These fasteners are for general use and are BH606141 1 3/4" SH606141
- 5/8" HU505 BH504141 1 3/4" SH504141
not intended to replace those listed for BH606161 2" SH606161 BH504161 2" -
- 3/4" HU506
specific applications elsewhere in this - 7/8" HU507 BH606181 2 1/4" SH606181 BH504181 2 1/4" SH504181
catalogue. Heralds were fitted almost - 1" HU508 BH606201 2 1/2" SH606201 BH504201 2 1/2" -
exclusively with UNF/UNC hardware. BH606221 2 3/4" -
1/4" UNF (28tpi) BH606241 3" - 5/16" UNC (18tpi)
UNF/UNC were threaded forms introduced Hexagon Headed 1/2" A.F. Spanner Size
Hexagon Headed 3/4" A.F. Spanner Size BH606281 3 1/2" -
into the USA during the 1940s (World War II) BH606321 4" - - 3/8" SH505031
- 3/8" SH604031
to give stability and standardization to - 1/2" SH604041 - 1/2" SH505041
various industries (automotive in particular). - 5/8" SH604051 7/16" UNF (20tpi) - 5/8" SH505051
It became standard in the British car industry - 3/4" SH604061 Hexagon Headed 5/8" A.F. Spanner Size - 3/4" SH505061
- 7/8" SH604071 - 5/8" SH607051 - 7/8" SH505071
in the 1950s. UNF stands for "Unified - 1" SH505081
BH604081 1" SH604081 - 3/4" SH607061
National Fine" and UNC "Unified National - 7/8" SH607071 - 1 1/8" SH505091
BH604091 1 1/8" SH604091
Coarse". BH604101 1 1/4" SH604101 - 1" SH607081 BH505101 1 1/4" SH505101
To aid identification by terminology, a screw BH604111 1 3/8" SH604111 - 1 1/8" SH607091 BH505111 1 3/8" SH505111
is threaded for its full length. A bolt is only BH604121 1 1/2" SH604121 - 1 1/4" SH607101 BH505121 1 1/2" SH505121
BH604141 1 3/4" SH604141 - 1 3/8" SH607111 BH505141 1 3/4" SH505141
part threaded with a plain unthreaded shank BH505161 2" -
BH604161 2" SH604161 BH607121 1 1/2" SH607121
area between the head and the thread. The BH607141 1 3/4" SH607141 BH505181 2 1/4" -
BH604181 2 1/4" -
part number two letter prefix of SH means BH604201 2 1/2" - BH607161 2" SH607161 BH505201 2 1/2" SH505201
that the item is a Screw with a Hexagon BH604241 3" - BH607181 2 1/4" SH607181 BH505241 3" -
head. The prefix BH means a Bolt with a BH607201 2 1/2" -
BH607241 3" - 3/8" UNC (16tpi)
Hexagon head. The first number defines the 5/16" UNF (24tpi) Hexagon Headed 9/16" A.F. Spanner Size
thread type, UNF = 6, UNC = 5. The second Hexagon Headed 1/2" A.F. Spanner Size - 1/2" SH506041
- 3/8" SH605031 1/2" UNF (20tpi)
and third numbers give the thread diameter Hexagon Headed 3/4" A.F. Spanner Size - 3/4" SH506061
- 1/2" SH605041
in increments of 1/16", e.g. 04 = 1/4", 05 = - 5/8" SH605051 - 1/2" SH608041 - 7/8" SH506071
- 3/4" SH605061 - 5/8" SH608051 BH506081 1" SH506081
5/16", 10 = 5/8". The fourth and fifth digits - 1 1/8" SH506091
show the length in increments of 1/8", e.g. - 7/8" SH605071 - 1" SH608081
- 1" SH605081 - 1 1/2" SH608121 - 1 1/4" SH506101
04 = 1/2", 16 = 2", 23 = 2 7/8". The last digit BH608141 1 3/4" SH608141 BH506111 1 3/8" SH506111
BH605091 1 1/8" SH605091
defines finish, 1 = zinc plated. This coding BH605101 1 1/4" SH605101 BH608161 2" - BH506121 1 1/2" SH506121
system is only applicable to bolts and BH605111 1 3/8" SH605111 BH608181 2 1/4" - BH506141 1 3/4" -
BH605121 1 1/2" SH605121 BH608201 2 1/2" SH608201 BH506161 2" SH506161
screws; nuts and washers are coded by a BH506181 2 1/4" -
similar system that follows some of the BH605141 1 3/4" SH605141 BH608241 3" -
BH605151 1 7/8" SH605151 BH506201 2 1/2" -
above principles. BH605161 2" SH605161 BH506241 3" SH506241
BH605181 2 1/4" SH605181
BH605201 2 1/2" SH605201
BH605221 2 3/4" SH605221
BH605241 3" SH605241

SELF TAPPING SCREWS NUTS CLEVIS PINS
Nuts Slotted or Castle 'CLZ' prefixed clevis
pins are measured from
FULL NUT THREAD SPANNER HALF NUT under the head to
Plain SIZE SIZE
ND606041 3/8" UNF 9/16" NL606041 the centre of
PAN SIZE LENGTH COUNTERSUNK FULL NUT THREAD SPANNER HALF NUT the split pin
HEADED HEADED SIZE SIZE ND607041 7/16" UNF 5/8" NL607041
ND608041 1/2" UNF 3/4" NL608041 hole.
AB604021 No. 4 1/4" AC604021 HN2003 No. 6 UNF 5/16" -
AB606021 No. 6 1/4" - ND609041 9/16" UNF 7/8" NL609041 'PJ' prefixed clevis pins are measured
HN2005 3/16" UNF 3/8" -
AB606031 No. 6 3/8" - ND610041 5/8" UNF 15/16" NL610041 from under the head to the end.
GHF206 3/16" UNF 5/16" -
AB606041 No. 6 1/2" AC606041 GHF200 1/4" UNF 7/16" NT604041 PART LENGTH DIAMETER
AB606061 No. 6 3/4" AC606061 NUMBER
GHF201 5/16" UNF 1/2" NT605041 108326 1/2" 1/8"
AB606081 No. 6 1" AC606081 GHF202 3/8" UNF 9/16" NT606041 Plain Brass -
AB608041 No. 8 1/2" AC608041 Manifold PJ8504 3/8" 3/16"
AB608061 No. 8 3/4" AC608061 GHF203 7/16" UNF 5/8" NT607041 CLZ307 7/16" 3/16"
GHF204 1/2" UNF 3/4" NT608041 FULL NUT THREAD SIZE SPANNER SIZE
AB608081 No. 8 1" - GHF261 5/16" UNF 1/2" CLZ308 1/2" 3/16"
AB610041 No. 10 1/2" AC610041 NH609041 9/16" UNF 7/8" NT609041 CLZ309 9/16" 3/16"
NH610041 5/8" UNF 15/16" NT610041 GHF262 3/8" UNF 9/16"
AB610061 No. 10 3/4" AC610061 CLZ310 5/8" 3/16"
AB610081 No. 10 1" AC610081 GHF207 1/4" UNC 7/16" NT504041 GHF270 5/16" UNC 1/2"
GHF269 3/8" UNC 9/16" CLZ311 11/16" 3/16"
AB612041 No. 12 1/2" AC612041 GHF208 5/16" UNC 1/2" NT505041 CLZ312 3/4" 3/16"
AB612061 No. 12 3/4" - GHF209 3/8" UNC 9/16" NT506041 CLZ313 13/16" 3/16"
AB612081 No. 12 1" AC612081
AB614061 No. 14 3/4" AC614061 CLZ314 7/8" 3/16"
AB614081 No. 14 1" AC614081 CLZ315 15/16" 3/16"
Spring/Spire Nut CLZ316 1" 3/16"
B = Pan Head FLAT TYPE SCREW SIZE 'U' TYPE
C = Countersunk Head CLZ317 1 1/16" 3/16"
GHF700 No. 6 GHF711 - 3/8" 1/4"
1st digit = thread type (coarse or fine) Nyloc Self Locking GHF701 No. 8 GHF712
2nd/3rd digit = diamater GHF220 3/16" UNF 5/16" - - 7/16" 1/4"
4th/5th = length in 1/8" increments GHF702 No. 10 GHF713 CLZ408 1/2" 1/4"
GHF221 1/4" UNF 7/16" GHF271
6th = finish (1 = zinc plated) GHF703 No. 12 GHF714 CLZ409 9/16" 1/4"
GHF222 5/16" UNF 1/2" GHF272
GHF704 No. 14 - CLZ410 5/8" 1/4"
GHF223 3/8" UNF 9/16" GHF273
STUDS GHF224
GHF225
7/16" UNF 5/8"
1/2" UNF 3/4"
GHF274
GHF275
CLZ411
CLZ412
11/16"
3/4"
1/4"
1/4"
YN2912 9/16" UNF 7/8" TN3212 Captive Nuts CLZ413 13/16" 1/4"
GHF226 5/8" UNF 15/16" GHF276 Captive nuts consist of a square nut and CLZ414 7/8" 1/4"
cage which we can supply individually as CLZ415 15/16" 1/4"
A stud is a length of round bar, threaded at both required for your car. Always match nut and CLZ416 1" 1/4"
ends. The length of the thread at each end of the cage A/F sizes. CLZ417 1 1/16" 1/4"
stud may vary for specific applications. PART DESCRIPTION THREAD CLZ427 1 11/16" 1/4"
The following list is of studs have fine (UNF) NUMBER SIZE - 1/2" 5/16"
thread form at both ends. NQ2707 Nut, 7/16" AF 1/4"
PART DIAMETER OVERALL Self Locking, - 9/16" 5/16"
NUMBER LENGTH Aero or all metal, Philidas NQ2708 Nut, 5/8" AF 5/16" CLZ510 5/8" 5/16"
GHF241 1/4" UNF 7/16" - CN4 Nut, fits CN3 cage 1/4" CLZ511 11/16" 5/16"
TE604081 1/4" 1"
TE604091 1/4" 1 1/8" GHF242 5/16" UNF 1/2" - CN5 Nut, 1/2" AF 5/16" CLZ512 3/4" 5/16"
TE604101 1/4" 1 1/4" GHF243 3/8" UNF 9/16" - PART DESCRIPTION SPANNER CLZ513 13/16" 5/16"
TE605101 5/16" 1 1/4" GHF244 7/16" UNF 5/8" - NUMBER (AF) SIZE CLZ514 7/8" 5/16"
TE605111 5/16" 1 3/8" GHF245 1/2" UNF 3/4" - CN2 Cage, square 7/16" CLZ515 15/16" 5/16"
TE605121 5/16" 1 1/2" CN3 Cage, oblong 7/16" CLZ516 1" 5/16"
TE605131 5/16" 1 5/8" CLZ517 1 1/16" 5/16"
TE605141 5/16" 1 3/4" 600032 Cage, square 1/2"
TE605151 5/16" 1 7/8" CLZ518 1 1/18" 5/16"
TE605181 5/16" 2 1/4"
TE605201
TE605221
5/16"
5/16"
2 1/2"
2 3/4"
WASHERS SPLIT PINS
TE605251 5/16" 3 1/8"
TE605291 5/16" 3 5/8"
TE606101 3/8" 1 1/4"
TE606111 3/8" 1 3/8" Plain Washers
TE606121 3/8" 1 1/2" Throw away and replace any washer with
TE606141 3/8" 1 3/4" PART LENGTH DIAMETER
Shakeproof Washers damage to either thrust face. NUMBER
TE606151 3/8" 1 7/8"
The following list is of studs have fine (UNF) thread INTERNAL HOLE EXTERNAL STANDARD HOLE REPAIR GHF500 1 1/2" 1/16"
STAR SIZE STAR TYPE SIZE TYPE GHF501 1 1/2" 5/64"
form at one end and course (UNC) at the other.
TE504081 1/4" 1" WF704061 No. 6 WE704061 - No. 6 WP3 GHF502 1 1/2" 3/32"
TE504131 1/4" 1 5/8" GHF320 3/16" WE702101 - No. 8 WP4 GHF503 2 1/4" 7/64"
TE505091 5/16" 1 1/8" GHF321 1/4" WE600041 GHF306 3/16" WP5 GHF504 2 1/4" 1/8"
TE505111 5/16" 1 3/8" GHF322 5/16" WE600051 GHF300 1/4" WP120 GHF505 2 1/4" 9/64"
TE505121 5/16" 1 1/2" GHF323 3/8" WE600061 GHF301 5/16" WP105
TE505131 5/16" 1 5/8" GHF506 2 1/4" 3/32"
GHF324 7/16" WE600071 GHF302 3/8" WP130 GHF513 3" 3/16
TE505141 5/16" 1 3/4" GHF325 1/2" WE600081
TE505151 5/16" 1 7/8" GHF303 7/16" WM69
TE505161 5/16" 2" WF600091 9/16" WE600091 GHF304 1/2" -
TE505181
TE505201
5/16"
5/16"
2 1/4"
2 1/2"
GHF326 5/8" WE600101 -
-
9/16"
5/8"
WP12
PWZ110
DOWELS
TE505221 5/16" 2 3/4"
TE505241 5/16" 3"
TE505261 5/16" 3 1/4" Locking PART DIAMETER OVERALL
TE505271 5/16" 3 3/8" Washers, NUMBER LENGTH
TE505281 5/16" 3 1/2" Spring Type DP204 1/8" 1/4"
TE505341 5/16" 4 1/4" SINGLE HOLE DOUBLE Sealing Washers DP205 1/8" 5/16"
TE506101 3/8" 1 5/16" COIL SIZE COIL FIBRE HOLE COPPER
TE506131 3/8" 1 5/8" DP306 3/16" 3/8"
WL700061 No. 6 - WASHER SIZE WASHER DP407 1/4" 7/16"
TE506141 3/8" 1 3/4" WF505 3/16" -
TE506161 3/8" 2" WL700081 No. 8 - DP408 1/4" 1/2"
TE506201 3/8" 2 1/2" GHF342 1/4" GHF361 DP410 1/4" 5/8"
WL700101 3/16" AJD7721
TE506361 3/8" 3 1/2" GHF343 5/16" GHF362 DP411 1/4" 11/16"
GHF331 1/4" AJD7722 GHF344 3/8" GHF363
The following list is of studs have course DP414 1/4" 7/8"
(UNC) thread form at both ends. GHF332 5/16" AJD7731 GHF345 7/16" GHF364 DP508 5/16" 1/2"
101442 3/8" 1 5/8" GHF333 3/8" AJD7742 GHF346 1/2" GHF365
58688 3/8" 1 11/16" DP514 5/16" 7/8"
GHF334 7/16" - GHF347 9/16" - DP608 3/8" 1/2"
115696 3/8" 1 13/16" GHF335 1/2" - GHF348 5/8" -
58917 3/8" 1 15/16" DP610 3/8" 5/8"
102474 3/8" 2 1/16" GHF336 5/8" - DP610 3/8" 1 3/16"
107055 3/8" 2 3/8"

PIPES, HARDWARE GREASE NIPPLES STEEL BALLS CABLE TIES

& FITTINGS
PART THREAD ANGLE PART NUMBER DIAMETER PART NUMBER DIAMETER

NUMBER SIZE GHF1265 3 1/2"
BLS106 3/16"
UHN400 1/8" BSP straight, short GHF1266 5 1/4"
Brake & Fuel Pipe UHN445 1/8" BSP 45º angle
BLS108 1/4"
Supplied in 25 footrolls. BLS110 5/16" RTC222A 6"
LN30041 1/8" BSP 90º angle GHF1267 8 3/4"
PART NUMBER MATERIAL SIZE BLS112 3/8"
144825 1/8" BSP straight, long GHF1268 11"
MPKF125 CUPRO-NICKEL 3/16" Dia. BLS28 7/16"
56935 1/4" BSP straight
MPKF225 CUPRO-NICKEL 1/4" Dia. 125361 1/4" BSP 45º angle
MPKF325 CUPRO-NICKEL 5/16" Dia.
EF125 STEEL 3/16" Dia.
56934 1/4" BSP 90º angle HOSE CLIPS
EF225 STEEL 1/4" Dia.
EF325 STEEL 5/16" Dia. POP RIVETS
Pipe Nuts - Hose Clips ('Supergrip' type)

Male, Steel. Open End Type Petrol Pipe Clips ('Enots' type)
PART NUMBER SIZE PART NUMBER TO SUIT DIAMETERS
PART THREAD PIPE Metric Sized
NUMBER SIZE BORE RA607096 2.9mm x 5mm CS4009 7/16" - 9/16"
PART NUMBER TO SUIT DIAMETER CS4011 1/2" - 11/16"
TM606031 3/8" UNF 3/16" RA608126 1/8" x 3/16"
RA608176 1/8" x 1/4" GGT1108X 8mm CS4012 9/16" - 3/4"
TM110051 10mm x 1mm 3/16" GGT1109X 9mm
RA608236 1/8" x 5/16" CS4013 5/8" - 13/16"
LK21994 3/8" BSF 3/16" GGT1110X 10mm CS4014 11/16" - 7/8"
RA608253 1/8" x 3/8"
BCA4370 7/16" UNF 3/16" GGT1111X 11mm CS4016 3/4" - 1"
BHA4706 7/16" UNF 1/4" Closed End Type GGT1112X 12mm CS4017 13/16" - 1 1/16"
AUSU40A 1/2" UNF 5/16" RU608123 1/8" x 3/8" GGT1113X 13mm CS4018 7/8" - 1 1/8"
RU608313 1/8" x 1/2" GGT1114X 14mm CS4020 1" - 1 1/4"
RU612123 3/16" x 5/16" GGT1115X 15mm CS4022 1 1/8" - 1 3/8"
GGT1116X 16mm CS4023 1 1/4" - 1 7/16"
Pipe Nuts - GGT1117X 17mm CS4024 1 5/16" - 1 1/2"
Male, Brass. ‘P’ CLIPS CS4025 1 3/8" - 1 9/16"
PART THREAD PIPE CS4026 1 7/16" - 1 5/8"
NUMBER SIZE BORE CS4028 1 9/16" -1 3/4"
AEHU1 3/8" UNF 3/16" CS4029 1 5/8" - 1 13/16"
AEHU2 10mm x 1mm 3/16" CS4030 1 11/16" - 1 7/8"
AEHU3 3/8" BSF 3/16" CS4032 1 7/8" - 2"
AEHU7 7/16" UNF 1/4" CS4034 1 15/16" - 2 1/8"
Hose Clips ('Jubilee' type) CS4036 2 1/16" - 2 1/4"
Imperial Sized
Mild Steel CS4037 2 1/8" - 2 5/16"
Imperial Sized CS4038 2 3/16" - 2 7/16"
PART CABLE FIXING
Pipe Nuts - NUMBER DIAMETER HOLE SIZE PART NUMBER TO SUIT DIAMETER CS4039 2 1/4" - 2 7/16"
Female, Steel. PCR207 1/8" 7/32" GHC304 3/8" - 1/2" CS4040 2 5/16" - 2 1/2"
PART THREAD PIPE PCR307 3/16" 7/32" GHC405 7/16" - 5/8" CS4041 2 3/8" - 2 9/16"
NUMBER SIZE BORE PCR309 3/16" 9/32" GHC406 1/2" - 3/4" CS4042 2 7/16" - 2 5/8"
TN606031 3/8" UNF 3/16" PCR311 3/16" 11/32" GHC507 5/8" - 7/8" CS4048 2 13/16" - 3"
SU2A 10mm x 1mm 3/16" PCR407 1/4" 7/32" GHC608 3/4" - 1" CS4052 3 1/16" - 3 1/4"
PCR409 1/4" 9/32" GHC709 5/8" - 1 1/8" CS4064 3 13/16" - 4"
SU4A 7/16" UNF 1/4"
PCR411 1/4" 11/32" GHC811 1" - 1 3/8"
HU41A 1/2" UNF 5/16"
PCR507 5/16" 7/32" GHC913 1 1/8" - 1 5/8"
PCR509 5/16" 9/32" GHC1015 1 3/8" - 2"
PCR511 5/16" 11/32" GHC1217 1 1/2" - 2 1/4"
Pipe Nuts - PCR607 3/8" 7/32" GHC1622 2" - 2 3/4"
Original "Supergrip" hose clips were
PCR609 3/8" 9/32" GHC2228 2 3/4" - 3 1/2"
Female, Brass. PCR611 3/8" 11/32" GHC2632 3 1/4 " - 4" supplied with a with single slotted round-
PART THREAD PIPE PCR707 7/16" 7/32" GHC3036 3 3/4 " - 4 1/2" head screw. The modern replacement
NUMBER SIZE BORE comes with a hex-headed screw.
PCR709 7/16" 9/32" GHC3340 4 1/8 " - 5"
AEHU1A 3/8" UNF 3/16" For the authentic look we have resourced
PCR711 7/16" 11/32"
AEHU2A 10mm x 1mm 3/16" PCR807 1/2" 7/32" the original type screw, (sold seperately)
AEHU4A 7/16" UNF 1/4"
Stainless Steel
PCR809 1/2" 9/32" Metric Sized CS4099 (round-head screw).
PCR811 1/2" 11/32" PART NUMBER TO SUIT DIAMETER
PCR813 1/2" 13/32"
GHC10408 8 - 12 mm
PCR1007 5/8" 7/32"
GHC10410 12 - 18 mm
PCR1009 5/8" 9/32"
GHC10411 8 - 16 mm
Bleed Screws PCR1011 5/8" 11/32"
GHC10412 12 - 20 mm
PART NUMBER THREAD SIZE PCR1207 3/4" 7/32"
GHC10413 16 - 25 mm
PCR1209 3/4" 9/32"
556508A 3/8" UNF GHC10414 20 - 32 mm
PCR1211 3/4" 11/32"
608400A 10mm metric GHC10415 25 - 40 mm
PCR1407 7/8" 7/32"
27H7166 3/8" BSF GHC10416 32 - 50 mm
PCR1409 7/8" 9/32"
GHC10417 46 - 60 mm
PCR1411 7/8" 11/32"
GHC10418 50 - 70 mm
PCR1607 1" 7/32"
GHC10419 60 - 80 mm
Metric Sized GHC10420 70 - 90 mm
GHC10421 80 - 100 mm
PART CABLE FIXING
Pipe Clips NUMBER DIAMETER HOLE SIZE
PART NUMBER CAPACITY CP105081 8mm 5mm Garage Packs:
Multi-pack assortment. Approx 3kg.
GHF1191 SINGLE, 3/16" CP108101 10mm 8mm To include:-
GHF1192 SINGLE, 1/4" CP108121 12mm 8mm Setscrews/nuts/nylocs/
624155 DOUBLE, 3/16" CP106161 16mm 6mm washers RX1560
CP108165 16mm 8mm
Bolts/nuts/nylocs/washers
RX1561
Description Page No Description Page No Description Page No Description Page No Description Page No
INDEX
A
Accelerator pedal 19
Crankshaft
Crankshaft bearings (Main) 11
Crankshaft oil seal
11 Hoses:
12, 14
Brake hoses -
Front 34, 35
O
Oil cooler (Engine) 11, 17, 60
Springs (Road);
Front (Coil)
Rear (Leaf)
28, 30
31
Adjuster (Rear brakes) 36 Crankshaft pulley 11 Rear 36, 37 Oil filler cap 13 Spockets;
Air cleaner/filters 19 Crankshaft sprocket 11 Breather (Engine) 19 Oil filter 7, 11 Camshaft 14
Alternator conversion 40 Crownwheel & pinion 25 Heater hoses 17 Oils (Lubricants) 72 Crankshaft 11
Anti-freeze 72 Cylinder block 10 Radiator hoses 17 Oil pan (Sump) 11 Starter motor 40
Anti-roll bar (Front suspension) 26 Cylinder head 12 Hose clips (General) 17 Oil pressure gauge kit 60 Steering column 38
Autoglym products 73 Cylinder liner 10 Hub bearings; Oil pressure relief valve 11 Steering knuckle/joint 38
Cylinder head gasket/sets 12 Front 27 Oil pressure switch 11 Steering rack 38
B
Badges (Body) 51 D
Rear
Hub oil seals;
Front
25
27
Oil pump (Engine)
Oil seals;
Crankshaft
11
12, 14
Steering Wheel
Stop/tail light (Rear lamps)
Striker plate (Doors)
39
42
48
Badges (Miscellanaeous); Decals & Badges 51 Rear 25 Front hub 27 Stub axle (Front hub) 27
Road wheels 32 Disc (Brake) 33, 34, 35 Hydraulics: Rear hub 25 Sump (Oil pan) 11
Steering Wheels 38 Differential 25 Brakes 37 Overmats (Interior) 57 Suspension Packs (Uprated) 30
Ball joint (Front suspension) 27 Dipstick (Engine) 11 Clutch 15 Switches 43
Battery 43 Distributor 40
Battery cables
Battery charger
43
64
Door & fittings
Door mirror
48
58 I P
Paint 78 T
Battery conditioner 64 Door trim panels 53 Ignition coil 7, 40 Parts Books (BL) 76 Tail lights (Rear lamps) 42
Belt (Fan) 7, 40 Drive shafts & rear hub 25 Ignition leads (HT/Plug leads) 40 Tappets (Camshaft followers) 14
Belt (Seat) 54 Pedal:
Ignition/steering column lock 39 Accelerator 19 Temperature gauge 43
Big end bearings (Con-rod) 11 Ignition switch 43
Body paint/codes
Bolts - General
78
78-80
E
Electronic ignition
Indicators
40 Indicator stalk
42
43
Brake pedal
Pedal rubber: See; Pedal.
Petrol See; Fuel
36 Temperature transmitter
Thermostat;
Cooling system
17
17
Bonnet & fittings; Engine Breather 19 Inlet manifold & fittings 17 Oil cooler (Engine) 11, 17
948, 1200 & 12/50 45 Pipes;
13/60 46 Engine Build Kits 9 Inlet valve 12
Clutch pipe 15 Timing chain 14
Bonnet Locks 45, 46 Engine mounting 16 Instruments & Gauges 43
Brake pipes 37 Timing cover & oil seal 14
Bottle (Windscreen washer) 40 Engine oils 72 Interior lighting 42
Fuel pipes 19 Tonneau cover 59
Exhaust manifolds & fittings; Interior mirror 50 Tools 70
Books 75-77 Pistons & rings (Engine) 12
Boot floor panel 47 Standard 20 Plugs (Spark) 7, 40 Track rod ends 38
Boot lid & fittings
Boot trim
49
58
Sports
Exhaust system & fittings;
21
J Plug leads (Ignition/HT leads) 7, 40
Points (Ignition/contact) 7, 40
Tread ‘Kick’ plates (Sill)
Trim Panels;
53
Brake adjuster (Rear brakes) 36 Standard 20 Jack (Car lift) 70

Polish 73 Boot trim panels 58
Brake calipers 34, 35 Sports 21 Jet (Windscreen washer) 40
Pressure cap (Cooling) 17 Door trim panels 53
Brake (wheel) cylinders 33, 36 Exhaust valve 12 Propshaft 25
Brake cleaner 70 K Pulley: See in this index;
U
Brake discs
Brake drum
Brake fluid
34, 35
33, 36
37
F
Fan (Cooling)
Key fob
17 Knuckle/Joint (Steering)
Crankshaft pulley and Water pump
Kenlowe Electric cooling fan 17 pulley.
68 Pump: See in this index; Underfelt kit (Carpets)
Universal joint (Propshafts) 25
57
38 Oil Pump (Engine) and Water Pump.
Brake hoses 37 Fan belt 7, 40 Universal joint (Steering knuckle) 38
Brake master cylinder 37 Filter
Brake pads
Brake pipe kit
34, 35
37
Air filter/Cleaners
Oil filter
19
6, 11 Lamp:
L R V
Brake servo 37 Finnegans waxoyl 73 Rack & pinion: Valance boards (Engine bay);
Headlamp 41 See in this index; Steering rack.
Brake shoes 33, 36 Flasher stalk 43 Fog lights 64 948, 1200 & 12/50 45
Breather hoses (Engine) 19 Flasher Unit (Indicators) 43 Radiator & hoses 17 13/60 46
Front side/flasher 42 Radius arm (Rear suspension) 31
Bulbs 41-42 Floor panels/sections 47 Interior/boot 42 Valves (Inlet & Exhaust) 12
Bumpers & fittings 50 Flywheel 11 Rear axle 25 Valve guides (Inlet & Exhaust) 12
Number plate 42 Rear brakes:
Bush kits 29 Fog lights (front & rear) 64 Rear 42 See in this index; Brakes. Vertical link (Rear suspension) 31
Front coil springs 28, 30 Stop, tail, flasher & reverse. Rear hub bearings 25 Vehicle security 65
C
Cables:
Front brakes
Front hub oil seals
Front hub
33-36 Lenses: See Lamp.
27 Lighting: See Lamp.
27 Light switches 43
Rear hub oil seals
Rear lamps & fittings
25
42
VIN/serial commission no.
Vouchers (Rimmer Bros)
6
68
Accelerator 8, 19 Rear (Road) spring 31
Battery
Choke cable
43
19
Front side/flasher lamp
Front wing;
948, 1200 & 12/50
43 Link (Vertical/Rear suspension) 31
45
Locks & fittings:
Bonnet 45, 46
Rear wing
Reference books
Rings (Piston/Engine)
47
77 W
12 Warning triangle 73
Handbrake 37 13/60 46 Boot lid 49
Heater 17 Ring gear (Flywheel) 11 Washers - general 79
Fuel cap 19 Door locks 48 Road springs: Water pump 17
Speedometer 43 Fuel gauge 43 Looms (Wiring harness) Main 43
Caliper (Brakes) 34, 35 Front (Coil) 28, 30 Waxoyl (Finnegans) 73
Fuel pipe kit 19 Lubricants & fluids 72 Rear (Leaf) 31 Wheel Arches - Front (Inner & outer);
Camshaft 14 Fuel pump 19 948, 1200 & 12/50 45
Car covers 71 Road wheels 32
Cap:
Fuel 19
Fuel tank 19
M Rocker cover
Rotor arm (Ignition)
13 13/60
7, 40 Wheel Arches (Rear)
46
47
Oil filler
Radiator (Pressure)
13
17 G
Gaskets (General)
Main bearings (Crankshaft)
Mainshaft
7 Manifolds:
11 Rubber (Body) seals
24 Rubber (Pedals)
8 Wheel (Hub) bearings:
36 Front
Rear
27
25
Carburettors 18
Gauges & Instruments 43 See in this index; Wheels - Road 32
Carpets
Chain (Timing)
Chassis frame/plates
57
14
44
Gearbox
Gearbox mounting
22 Exhaust Manifolds & Fittings, and
16 Inlet Manifold & Fttings.
S
Screen washer system
Wheels - Steering
40 Wheel (Brake) cylinders 33, 36
39
Choke cable 19 Gear lever 23 Manuals (Workshop) 75

Screws - general 78-80 Wheel nuts 32
Gear oil Master cylinder:
72 See
Clutch cover 15 in this index; Seals (Body/rubber) 8, 45-49 Wind deflector 67
Clutch fluid 15 General Fastners 78-80 Brake master cylinder, and, Seals (Oil); Window (Door) seals 48
Bolts, setscrews, washers. Clutch master cylinder.
Clutch master cylinder 15 Glass: Mats 57, 58 Crankshaft 12, 14 Window regulator/handle 48
Clutch operating lever 22 Door drop glass 48 Mirrors 50 Front hub 27 Windscreen (Glass) 49
Clutch plate 15
Windscreen 49 Mouldings (Body) 50 Rear hub 25 Windscreen washer system 40
Clutch release bearing 15
Mountings; Seat trim/covers 54, 55 Wing (Body);
Clutch slave cylinder 15 Seat belts 54 Front 45, 46
Clutch (Alignment) tool
Coil (Ignition)
15
40 H
H.T. leads (Ignition/plug leads) 40
Differential
Engine
Anti-Roll bar
25
16
26
Security (Vehicle) 65 Rear
Serial/commission numbers 6 Wiper system
47
40
Coil springs 28, 30
Halogen headlamps 41 Gearbox 16 Service kits 8 Wire wheels 32
Column (Steering) 39
Handbrake cable 37 Mudflaps (front/rear) 63 Setscrews - general 78-80 Wiring harness 43
Commission/serial numbers 6 Shock absorber Standard & Workshop consumables
Condenser 7, 40 Handbooks 76 & materials 70
Uprated;
Con rod
Con rod bearings (Big end) 11
Contact breaker points
12
7, 40
Harness (Wiring)
Head gaskets
Headlamps
43
7, 12 N
41 Nacelle's 39
Front
Rear
28, 30 Workshop manual
30, 31
75
Headlamp dip/flash stalk 43 Covers/cowls (Steering column). Side/flasher lights 42

Cooling fan 17 Knock caps (wire wheels) 32 Silencer 20, 21
Core plugs (set) 7, 10 Heater hoses 17
Heater unit 17 Number plates 68 Sills
Countershaft (Gearbox) 24 Number plate lamp 42 47 ACKNOWLEDGEMENTS
Covers/cowls (Steering colum) 39 Hinges (Bonnet);
948, 1200 & 12/50 45 Nuts - General 78-80 Slave cylinder (Clutch) 15 We would like to thank the
Covers;
Car covers 71 13/60 46 Nuts - Road wheel 32 Solenoid (Starter motor) 40 many car owners who allowed
Rocker cover 13 Hinges (Doors) 48 Spark plugs 40 us to take photographs of their
Seat trim/covers 54, 55 Hood care products 70 Speedometer & cable 43 cars.
Timing cover 14 Hood cover 59 Speedometer drive pinion 23 Also to the team at Rimmer
Hood stowage covers 59 Split pins - general 79 Bros for putting this catalogue
Horns 43 Spinners (wire wheels) 32 together and for making it all
happen.
46 210 210 170 64
PAGES PAGES PAGES PAGES PAGES
218 76 56 82 82
PAGES PAGES PAGES PAGES PAGES
90 106 72P
PAGES PAGES AGES
90 68 108 32
PAGES PAGES PAGES PAGES
OUR CATALOGUES
ARE YOUR PASSPORT TO THE FINEST MAIL-ORDER PARTS SERVICE
RIMMER BROS CATALOGUES

If you are a Triumph, SD1, MG Rover, Range Rover, Freelander,
Defender or Discovery owner -
44 98 a catalogue will be despatched FREE including post & packing.
PAGES PAGES Small postage charge made for additional catalogues.
FOR YOUR COPY, PHONE, FAX, WRITE OR E-MAIL.
BROWSE OUR FULL SET OF CATALOGUES (POSTAGE CHARGES)

CATALOGUES ON YOUR PC! £10 (UK) £15 (Europe) £35 (Rest of World)
Once registered as a customer for a specific vehicle you will be automatically updated
SEE PRICE GUIDE FOR DETAILS. (free of charge) with any new catalogue or price guides as they are published.
HOW TO FIND US
We’re 2 miles south of Lincoln,
on the A15 Lincoln to Sleaford road.
When approaching Lincoln from the A1/A46,
follow the A1434 signposted to city centre,
through North Hykeham, then pick up signs
for the A15 to Sleaford.
BUSINESS HOURS
8.30am - 5.30pm Monday to Friday.
8.30am - 1pm Saturday. ALL PARTS ARE GUARANTEED
We are closed Sunday and on all Bank “It’s our objective to ensure the satisfaction of every one
Holidays except Good Friday. of our customers.”
Please refer to our Price Guide for warranty information.
A BRITISH COMPANY SUPPORTING BRITISH CARS

Rimmer Bros Ltd. Triumph House, Sleaford Road, Bracebridge Heath, Lincoln LN4 2NA, England.
Telephone: 01522 568000
Fax: 01522 567600. E-mail: [email protected]
www.rimmerbros.co.uk
LAND ROVER
RANGE ROVER . DEFENDER
DISCOVERY . FREELANDER
TR2-8, SPITFIRE, GT6, STAG, 2000/2500,
AUTHORISED PARTS DISTRIBUTOR HERALD/VITESSE, DOLOMITE/SPRINT.
AUTHORISED PARTS DISTRIBUTOR
Original Parts & Accessories Original Parts & Accessories

Triumph Herald

Uploaded by

Copyright:

Available Formats

Triumph Herald

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Triumph Herald

Uploaded by

Copyright:

Available Formats

A L L T H E P A R T S Y O U N E E D

PARTS & ACCESSORIES CATALOGUE

SERVICE separate chassis, ease of maintenance, and its

- HELPING YOU CARE FOR YOUR HERALD

- BRITISH MOTOR HERITAGE

THE CARS WE SPECIALISE IN

TRIUMPH PARTS SPECIALIST

(Overseas +44 1522 568000) ORDERING BY PHONE

MODEL SUFFIX LETTERS YOUR VEHICLE DETAILS

Sun Roof (Factory) RS

ENGINE & COMMISSION NUMBERS

Engine Service Kits

7 ORDER ON: 01522 568000 / www.rimmerbros.co.uk

Front Suspension Kits Rubber Seals

ORDER ON: 01522 568000 / www.rimmerbros.co.uk 8

Full Engine Rebuild Kit

9 ORDER ON: 01522 568000 / www.rimmerbros.co.uk

A remote mounted kit for increased lubrication

ORDER ON: 01522 568000 / www.rimmerbros.co.uk 10

11 ORDER ON: 01522 568000 / www.rimmerbros.co.uk

ORDER ON: 01522 568000 / www.rimmerbros.co.uk 12

13 ORDER ON: 01522 568000 / www.rimmerbros.co.uk

Timing Cover; GHF332 (5)

ORDER ON: 01522 568000 / www.rimmerbros.co.uk 14

CLUTCH MASTER CYLINDER GHF272

Clutch Assembly Clutch Hydraulics

SILICONE - DOT5 BRAKE &

15 ORDER ON: 01522 568000 / www.rimmerbros.co.uk

ENGINE & GEARBOX MOUNTINGS

TN3209 (2) ENGINE

If you know what you want

JOIN OUR E-MAIL LIST FOR NEWS ON SPECIAL OFFERS!

G For use in all water cooled engines FOR ALL

17 ORDER ON: 01522 568000 / www.rimmerbros.co.uk

1200 & 12/50

ORDER ON: 01522 568000 / www.rimmerbros.co.uk 18

K&N AIR FILTERS

K&N Air Filter;

19 ORDER ON: 01522 568000 / www.rimmerbros.co.uk

13/60 MODELS BH605181

ORDER ON: 01522 568000 / www.rimmerbros.co.uk 20

Thermo-Tec exhaust insulating wrap reduces

GUIDE TO TYPICAL AMOUNT OF WRAP REQ’D BY PIPE SIZE

Exhaust Insulating Wrap - 2" x 50' RX1382

21 ORDER ON: 01522 568000 / www.rimmerbros.co.uk

GEAR – LEVER FITTINGS 611353

TOP COVER AND SELECTORS

TOP COVER GHF331

23 ORDER ON: 01522 568000 / www.rimmerbros.co.uk

DRIVE FLANGE & FITTINGS

ORDER ON: 01522 568000 / www.rimmerbros.co.uk 24

Differential Differential Mountings Propshaft

Inner Axle Shaft

25 ORDER ON: 01522 568000 / www.rimmerbros.co.uk

Front Anti-Roll Bar IF YOU REALLY WANT TO IMPROVE THE

FRONT ANTI-ROLL BAR

ORDER ON: 01522 568000 / www.rimmerbros.co.uk 26

GSJ155 (2) GHF222

GHF275 WC112081 (2)

27 ORDER ON: 01522 568000 / www.rimmerbros.co.uk