BDC

 report ZMFBDC1
       no standard page heading line-size 255.

* Include bdcrecx1_s:
* The call transaction using is called WITH AUTHORITY-CHECK!
* If you have own auth.-checks you can use include bdcrecx1 instead.
*include bdcrecx1_s.
include zff_bdc.

start-of-selection.

perform open_group.

loop at it_bdc into   wa_bdc FROM 2.

perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MATNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'RMMG1-MATNR'
*
                                wa_bdc-matnr.
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                              'X'.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
perform bdc_field       using 'MAKT-MAKTX'
                              'RM With out Accounting tab'.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-BISMT'.

perform bdc_field       using 'MARA-MEINS'
                              'NOS'.
perform bdc_field       using 'MARA-MATKL'
                              '100'.
perform bdc_field       using 'MARA-BISMT'
                              wa_bdc-BISMT.
perform bdc_transaction using 'MM02'.

ENDLOOP.
perform close_group.

INCLUDE PROGRAMME.
***INCLUDE BDCRECX1_S.
*  for programs doing a data transfer by creating a batch-input session
*  and
*  for programs doing a data transfer by CALL TRANSACTION USING
*  secured version WITH AUTHORITY-CHECK.

SELECTION-SCREEN BEGIN OF LINE.
  PARAMETERS SESSION RADIOBUTTON GROUP CTU.  "create session
  SELECTION-SCREEN COMMENT 3(20) TEXT-S07 FOR FIELD SESSION.
  selection-screen position 45.
  PARAMETERS CTU RADIOBUTTON GROUP  CTU.     "call transaction
  SELECTION-SCREEN COMMENT 48(20) TEXT-S08 FOR FIELD CTU.
SELECTION-SCREEN END OF LINE.

SELECTION-SCREEN BEGIN OF LINE.
  SELECTION-SCREEN COMMENT 3(20) TEXT-S01 FOR FIELD GROUP.
  selection-screen position 25.
  PARAMETERS GROUP(12).                      "group name of session
  SELECTION-SCREEN COMMENT 48(20) TEXT-S05 FOR FIELD CTUMODE.
  selection-screen position 70.
  PARAMETERS CTUMODE LIKE CTU_PARAMS-DISMODE DEFAULT 'N'.
                                      "A: show all dynpros
                                      "E: show dynpro on error only
                                      "N: do not display dynpro
SELECTION-SCREEN END OF LINE.

SELECTION-SCREEN BEGIN OF LINE.
  SELECTION-SCREEN COMMENT 3(20) TEXT-S02 FOR FIELD USER.
  selection-screen position 25.
  PARAMETERS: USER(12) DEFAULT SY-UNAME.     "user for session in batch
  SELECTION-SCREEN COMMENT 48(20) TEXT-S06 FOR FIELD CUPDATE.
  selection-screen position 70.
  PARAMETERS CUPDATE LIKE CTU_PARAMS-UPDMODE DEFAULT 'L'.
                                      "S: synchronously
                                      "A: asynchronously
                                      "L: local
SELECTION-SCREEN END OF LINE.

SELECTION-SCREEN BEGIN OF LINE.
  SELECTION-SCREEN COMMENT 3(20) TEXT-S03 FOR FIELD KEEP.
  selection-screen position 25.
  PARAMETERS: KEEP AS CHECKBOX.       "' ' = delete session if finished
                                      "'X' = keep   session if finished
  SELECTION-SCREEN COMMENT 48(20) TEXT-S09 FOR FIELD E_GROUP.
  selection-screen position 70.
  parameters E_GROUP(12).             "group name of error-session
SELECTION-SCREEN END OF LINE.

SELECTION-SCREEN BEGIN OF LINE.
  SELECTION-SCREEN COMMENT 3(20) TEXT-S04 FOR FIELD HOLDDATE.
  selection-screen position 25.
  PARAMETERS: HOLDDATE LIKE SY-DATUM.
  SELECTION-SCREEN COMMENT 51(17) TEXT-S02 FOR FIELD E_USER.
  selection-screen position 70.
  PARAMETERS: E_USER(12) DEFAULT SY-UNAME.    "user for error-session
SELECTION-SCREEN END OF LINE.

SELECTION-SCREEN BEGIN OF LINE.
  SELECTION-SCREEN COMMENT 51(17) TEXT-S03 FOR FIELD E_KEEP.
  selection-screen position 70.
  PARAMETERS: E_KEEP AS CHECKBOX.     "' ' = delete session if finished
                                      "'X' = keep   session if finished
SELECTION-SCREEN END OF LINE.

SELECTION-SCREEN BEGIN OF LINE.
  SELECTION-SCREEN COMMENT 51(17) TEXT-S04 FOR FIELD E_HDATE.
  selection-screen position 70.
  PARAMETERS: E_HDATE LIKE SY-DATUM.
SELECTION-SCREEN END OF LINE.

SELECTION-SCREEN SKIP.

SELECTION-SCREEN BEGIN OF LINE.
  SELECTION-SCREEN COMMENT 1(33) TEXT-S10 FOR FIELD NODATA.
  PARAMETERS: NODATA DEFAULT '/' LOWER CASE.          "nodata
SELECTION-SCREEN END OF LINE.

SELECTION-SCREEN BEGIN OF LINE.
  SELECTION-SCREEN COMMENT 1(33) TEXT-S11 FOR FIELD SMALLLOG.
  PARAMETERS: SMALLLOG as checkbox.  "' ' = log all transactions
                                     "'X' = no transaction logging
SELECTION-SCREEN END OF LINE.

TYPES: BEGIN OF TY_BDC,
MATNR TYPE CHAR20,
BISMT TYPE CHAR20,
END OF TY_BDC.

DATA: IT_bdc TYPE STANDARD TABLE OF TY_BDC,
WA_BDC TYPE TY_BDC.

PARAMETERS : P_BDC TYPE IBIPPARMS-PATH.

*----------------------------------------------------------------------*
*   data definition
*----------------------------------------------------------------------*
*       Batchinputdata of single transaction
DATA:   BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
*       messages of call transaction
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
*       error session opened (' ' or 'X')
DATA:   E_GROUP_OPENED.
*       message texts
TABLES: T100.

*----------------------------------------------------------------------*
*   at selection screen                                                
*
*----------------------------------------------------------------------*
AT SELECTION-SCREEN.
* group and user must be filled for create session
  IF SESSION = 'X' AND
     GROUP = SPACE OR USER = SPACE.
    MESSAGE E613(MS).
  ENDIF.

  AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_BDC.

    CALL FUNCTION 'F4_FILENAME'
*     EXPORTING
*       PROGRAM_NAME        = SYST-CPROG
*       DYNPRO_NUMBER       = SYST-DYNNR
*       FIELD_NAME          = ' '
     IMPORTING
       FILE_NAME           = P_BDC.

data: lv_filename_upload TYPE string.

lv_filename_upload = p_bdc.

    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                      = lv_filename_upload
       FILETYPE                      = 'ASC'
       HAS_FIELD_SEPARATOR           = 'X'
*       HEADER_LENGTH                 = 0
*       READ_BY_LINE                  = 'X'
*       DAT_MODE                      = ' '
*       CODEPAGE                      = ' '
*       IGNORE_CERR                   = ABAP_TRUE
*       REPLACEMENT                   = '#'
*       CHECK_BOM                     = ' '
*       VIRUS_SCAN_PROFILE            =
*       NO_AUTH_CHECK                 = ' '
*     IMPORTING
*       FILELENGTH                    =
*       HEADER                        =
      tables
        data_tab                      = it_bdc
*     CHANGING
*       ISSCANPERFORMED               = ' '
*     EXCEPTIONS
*       FILE_OPEN_ERROR               = 1
*       FILE_READ_ERROR               = 2
*       NO_BATCH                      = 3
*       GUI_REFUSE_FILETRANSFER       = 4
*       INVALID_TYPE                  = 5
*       NO_AUTHORITY                  = 6
*       UNKNOWN_ERROR                 = 7
*       BAD_DATA_FORMAT               = 8
*       HEADER_NOT_ALLOWED            = 9
*       SEPARATOR_NOT_ALLOWED         = 10
*       HEADER_TOO_LONG               = 11
*       UNKNOWN_DP_ERROR              = 12
*       ACCESS_DENIED                 = 13
*       DP_OUT_OF_MEMORY              = 14
*       DISK_FULL                     = 15
*       DP_TIMEOUT                    = 16
*       OTHERS                        = 17
              .
    IF sy-subrc <> 0.
* Implement suitable error handling here
    ENDIF.

*----------------------------------------------------------------------*
*   open dataset                                                      
 *
*----------------------------------------------------------------------*
FORM OPEN_DATASET USING P_DATASET.
  OPEN DATASET P_DATASET
               FOR INPUT IN TEXT MODE
               ENCODING DEFAULT.
  IF SY-SUBRC <> 0.
    WRITE: / TEXT-E00, SY-SUBRC.
    STOP.
  ENDIF.
ENDFORM.

*----------------------------------------------------------------------*
*   close dataset                                                     
 *
*----------------------------------------------------------------------*
FORM CLOSE_DATASET USING P_DATASET.
  CLOSE DATASET P_DATASET.
ENDFORM.

*----------------------------------------------------------------------*
*   create batchinput session                                          
*
*   (not for call transaction using...)                                *
*----------------------------------------------------------------------*
FORM OPEN_GROUP.
  IF SESSION = 'X'.
    SKIP.
    WRITE: /(20) 'Create group'(I01), GROUP.
    SKIP.
*   open batchinput group
    CALL FUNCTION 'BDC_OPEN_GROUP'
         EXPORTING  CLIENT   = SY-MANDT
                    GROUP    = GROUP
                    USER     = USER
                    KEEP     = KEEP
                    HOLDDATE = HOLDDATE.
    WRITE: /(30) 'BDC_OPEN_GROUP'(I02),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
  ENDIF.
ENDFORM.

*----------------------------------------------------------------------*
*   end batchinput session                                             
*
*   (call transaction using...: error session)                         *
*----------------------------------------------------------------------*
FORM CLOSE_GROUP.
  IF SESSION = 'X'.
*   close batchinput group
    CALL FUNCTION 'BDC_CLOSE_GROUP'.
    WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
  ELSE.
    IF E_GROUP_OPENED = 'X'.
      CALL FUNCTION 'BDC_CLOSE_GROUP'.
      WRITE: /.
      WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
      E_GROUP_OPENED = ' '.
    ENDIF.
  ENDIF.
ENDFORM.

*----------------------------------------------------------------------*
*        Start new transaction according to parameters                 *
*----------------------------------------------------------------------*
FORM BDC_TRANSACTION USING TCODE.
  DATA: L_MSTRING(480).
  DATA: L_SUBRC LIKE SY-SUBRC.
  DATA: lx_auth_check TYPE REF TO cx_root.
  DATA: l_auth_check_text TYPE string.
* batch input session
  IF SESSION = 'X'.
    CALL FUNCTION 'BDC_INSERT'
         EXPORTING TCODE     = TCODE
         TABLES    DYNPROTAB = BDCDATA.
    IF SMALLLOG <> 'X'.
      WRITE: / 'BDC_INSERT'(I03),
               TCODE,
               'returncode:'(I05),
               SY-SUBRC,
               'RECORD:',
               SY-INDEX.
    ENDIF.
* call transaction using
  ELSE.
    REFRESH MESSTAB.
    TRY.
      CALL TRANSACTION TCODE WITH AUTHORITY-CHECK USING BDCDATA
                       MODE   CTUMODE
                       UPDATE CUPDATE
                       MESSAGES INTO MESSTAB.
    CATCH cx_sy_authorization_error INTO lx_auth_check.
*     Authorization missing for user when executing transaction
      l_auth_check_text = lx_auth_check->get_text( ).
      SY-SUBRC = 99.
    ENDTRY.
    L_SUBRC = SY-SUBRC.
    IF SMALLLOG <> 'X'.
      WRITE: / 'CALL_TRANSACTION',
               TCODE,
               'returncode:'(I05),
               L_SUBRC,
               'RECORD:',
               SY-INDEX.
      IF L_SUBRC <> 99.
        LOOP AT MESSTAB.
          MESSAGE ID     MESSTAB-MSGID
                  TYPE   MESSTAB-MSGTYP
                  NUMBER MESSTAB-MSGNR
                  INTO L_MSTRING
                  WITH MESSTAB-MSGV1
                       MESSTAB-MSGV2
                       MESSTAB-MSGV3
                       MESSTAB-MSGV4.
          WRITE: / MESSTAB-MSGTYP, L_MSTRING(250).
        ENDLOOP.
      ELSE.
        WRITE: / l_auth_check_text.
      ENDIF.
      SKIP.
    ENDIF.
** Erzeugen fehlermappe ************************************************
    IF L_SUBRC <> 0 AND L_SUBRC <> 99 AND E_GROUP <> SPACE.
      IF E_GROUP_OPENED = ' '.
        CALL FUNCTION 'BDC_OPEN_GROUP'
             EXPORTING  CLIENT   = SY-MANDT
                        GROUP    = E_GROUP
                        USER     = E_USER
                        KEEP     = E_KEEP
                        HOLDDATE = E_HDATE.
         E_GROUP_OPENED = 'X'.
      ENDIF.
      CALL FUNCTION 'BDC_INSERT'
           EXPORTING TCODE     = TCODE
           TABLES    DYNPROTAB = BDCDATA.
    ENDIF.
  ENDIF.
  REFRESH BDCDATA.
ENDFORM.

*----------------------------------------------------------------------*
*        Start new screen                                             
 *
*----------------------------------------------------------------------*
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
  CLEAR BDCDATA.
  BDCDATA-PROGRAM  = PROGRAM.
  BDCDATA-DYNPRO   = DYNPRO.
  BDCDATA-DYNBEGIN = 'X'.
  APPEND BDCDATA.
ENDFORM.

*----------------------------------------------------------------------*
*        Insert field                                                 
 *
*----------------------------------------------------------------------*
FORM BDC_FIELD USING FNAM FVAL.
  IF FVAL <> NODATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
  ENDIF.
ENDFORM.