Specific Registration Requirements For Construction Workhead (CW)
Specific Registration Requirements For Construction Workhead (CW)
(c) Installation of roofs. Firms which undertake waterproofing work should register under CR13.
CW02 Civil (a) Works involving concrete, masonry and steel in bridges, sewers, culverts, reservoirs,
Engineering retaining walls, canals, drainage systems, underground structures, cutting and filling of embankment,
river banks, excavation of deep trenches, scraping of sub-soil, surface drainage works, flexible
pavement, rigid pavement or laterite roads, bus bays, open car-parks and related works such as kerbs
and footways. Firms which undertake piling works, ground support and stabilization works or site
investigation works should register under CR08, CR12 and CR15 respectively.
(b) Works involving dredging in canal, river and offshore for the purpose of deepening and
extraction of mineral or construction material. It also includes reclamation works.
(c) Works involving marine piling and the construction of marine structures such as jetties,
wharves, sea and river walls. The head does not cover the construction and fabrication of marine
crafts, pontoons and oilrigs or any floating platform.
1
CW SRR – Dec 2021 Edition
TABLE B1
REGISTRATION REQUIREMENTS
Track Record (Past 3 years) Management & Additional
Grade Financial (Notes 3–6) Personnel
(Note 14) (Notes 1–2) (Notes 7–9)
Development Requirements
CW01 CW02 (notes 10-13) (Note 15)
2
CW SRR – Dec 2021 Edition
Notes for Table B1
Financial
1) Both minimum paid-up capital and minimum net worth must be met separately. C3 firms are required to submit the latest
management accounts (not more than 12 months old).
2) Grades A1 to B2 firms are required to submit the following annually (not more than 4 months for SGX listed companies and
not more than 6 months for non-SGX listed companies from the accounts closing date):
i) Audited accounts and meet the financial requirement in order to retain in their respective grades.
ii) Complete and submit Annual Return of the Construction Industry conducted by BCA’s Economic Research Department.
Track Record
3) Completed projects in the past three years for all cases. For renewal, projects completed satisfactorily in the past 5 years
including ongoing and newly awarded projects are acceptable. For CW02-A1 registration, projects completed satisfactorily in
the past 5 years can be considered as track record.
4) Contractors are expected to complete:
i) PS - minimum projects executed in Singapore
ii) MC - minimum main contracts (nominated sub-contracts may be included)
iii) SP - minimum size single main contract or nominated sub-contract (if sub-contract, please refer to note 5)
Example for CW01 – A1, if you completed a project in Singapore in the past 3 years with a contract value of $150m, you will
have met the minimum requirements for PS, MC and SP
5) Percentage of sub-contract value taken into consideration shall be 50% for CW01 and 75% for CW02.
6) For CW02, only the value of the civil engineering project will be accepted. For example, if a building includes deep basement
construction, only the value of the basement construction works will be accepted.
Personnel
7) Please refer to definition of RP/P/T/CCPP/SDCP/ACCP/BCCPE/CET in Table B2.
8) A1 and A2 require at least one-third of the RP/P/T with minimum 24 months of relevant experience in Singapore. Out of the
24 months, at least 12 months of relevant experience in Singapore within the latest three years
9) First time application for A1 require every technical personnel to be interviewed by BCA
Others
13) For the tendering limits, please refer to www1.bca.gov.sg/procurement/pre-tender-stage/contractors-registration-system-
crs/crs-tendering-limits
14) For more details on GB1/GB2, please refer to www1.bca.gov.sg/regulatory-info/building-control/builder-licensing
3
CW SRR – Dec 2021 Edition
TABLE B2
PERSONNEL QUALIFICATION
Workhead Title Description and Personnel Qualifications
CW01 General Building “RP” shall mean a degree in Civil/Structural, Mechanical, Electrical Engineering recognized by PEB
or BCA, Architecture recognised by BOA. The lists can be obtained from the internet at
CW02 Civil Engineering PEB: PEB Approved Qualifications ,
BOA: BOA Approved Qualifications and
BCA: List of Acceptable Qualifications for RE Accreditation.pdf .
iii) Such other diplomas or qualifications as approved by BCA from time to time.
“SDCP” shall mean Specialist Diploma in Construction Productivity conducted by BCA Academy
“ACCP” shall mean Advanced Certificate of Construction Productivity conducted by BCA Academy
“CET” shall mean Continuing Education & Training, the minimum number of personnel required in
A1 and A2 firms must comply with the CET requirement to obtain a minimum of 14 hours of
structured training annually over a 12-month period from 1 Nov to 31 Oct (of the next calendar
year). The declaration form should reach BCA by 30 Nov each year for verification. Personnel with
Employment Pass or S-Pass will also require verification by the company’s financial auditor or legal
firm/credit rating agency incorporated in Singapore that they have remained in Singapore for at
least 183 days in the last one year at the point of CET submission. More information on the CET
requirement is available at http://www.bca.gov.sg/ContractorsRegistry/others/CET_FAQ.pdf