 IT Questions Bank Commands Help Resources »  IP Calculators »  Donations  My account Search the site 

 Home  CCNA v7 » IT Essentials 7.0 » Security » CyberOps » CCNP v8 » DevNet Linux » Networking Essentials

CCNA 1 v7 Modules 1 – 3: Basic Network Connectivity and

Communications Exam Answers
Dec 18, 2019 |
Last Updated: Dec 17, 2021 |
CCNA v7 Course #1 |
76 Comments

 Share  Tweet  Share  Pin it

How to find: Press “Ctrl + F” in the browser and fill in whatever wording is in the question
to find that question/answer. If the question is not here, find it in Questions Bank.

NOTE: If you have the new question on this test, please comment Question and
Multiple-Choice list in form below this article. We will update answers for you in the
shortest time. Thank you! We truly value your contribution to the website.

Introduction to Networks (Version 7.00) – Modules 1 – 3: Basic Network

Connectivity and Communications Exam
1. During a routine inspection, a technician discovered that software that was installed on
a computer was secretly collecting data about websites that were visited by users of the
computer. Which type of threat is affecting this computer?

DoS attack​
identity theft
spyware
zero-day attack
2. Which term refers to a network that provides secure access to the corporate offices by
suppliers, customers and collaborators?

Internet
intranet
extranet
extendednet
3. A large corporation has modified its network to allow users to access network
resources from their personal laptops and smart phones. Which networking trend does
this describe?

cloud computing
online collaboration
bring your own device
video conferencing
4. What is an ISP?

CCNA v7.0 Exam Answers x

CCNA 1 - v7 CCNA 2 - v7 CCNA 3 - v7
 System Test Exam x
Modules 1 - 3: Basic Network
Connectivity and Communications
Exam Answers

Modules 4 - 7: Ethernet Concepts

Exam Answers

Modules 8 - 10: Communicating

Between Networks Exam Answers

Modules 11 - 13: IP Addressing Exam

It is a standards body that develops cabling and wiring standards for networking. Answers
It is a protocol that establishes how computers within a local network communicate.
It is an organization that enables individuals and businesses to connect to the Modules 14 - 15: Network Application
Internet. Communications Exam Answers
It is a networking device that combines the functionality of several different networking
Modules 16 - 17: Building and
devices in one.
Securing a Small Network Exam
5. Match the requirements of a reliable network with the supporting network architecture. Answers
(Not all options are used.)

[PT Skills] Practice PT Skills

Assessment (PTSA)

[Final Skills] ITN Final Skills Exam

(PTSA)

ITNv7 Practice Final Exam

CCNA 1 v7 FINAL Exam Answers

System Test Exam

Modules 1 - 4: Switching Concepts,

VLANs, and InterVLAN Routing Exam
Answers

Modules 5 - 6: Redundant Networks

Exam Answers

Modules 7 - 9: Available and Reliable

Networks Exam Answers

Modules 10 - 13: L2 Security and

WLANs Exam Answers

Modules 14 - 16: Routing Concepts

and Configuration Exam Answers

[PT Skills] SRWE Practice PT Skills

Assessment (PTSA) - Part 1
6. An employee at a branch office is creating a quote for a customer. In order to do this,
the employee needs to access confidential pricing information from internal servers at the [PT Skills] SRWE Practice PT Skills
Head Office. What type of network would the employee access? Assessment (PTSA) - Part 2

an intranet [Final Skills] SRWE Final Skills Exam

the Internet (PTSA)
an extranet
SRWEv7 Practice Final Exam
a local area network
CCNA 2 v7 FINAL Exam Answers
Explanation: Intranet is a term used to refer to a private connection of LANs and WANs that
belongs to an organization. An intranet is designed to be accessible only by the
organization’s members, employees, or others with authorization.
System Test Exam

Modules 1 - 2: OSPF Concepts and

7. Which statement describes the use of powerline networking technology? Configuration Exam Answers

New “smart” electrical cabling is used to extend an existing home LAN. Modules 3 - 5: Network Security Exam
A home LAN is installed without the use of physical cabling. Answers
A device connects to an existing home LAN using an adapter and an existing
electrical outlet. Modules 6 - 8: WAN Concepts Exam
Wireless access points use powerline adapters to distribute data through the home LAN. Answers

Modules 9 - 12: Optimize, Monitor, and

Explanation: Powerline networking adds the ability to connect a device to the network using Troubleshoot Networks Exam Answers
an adapter wherever there is an electrical outlet.​The network uses existing electrical wiring
to send data. It is not a replacement for physical cabling, but it can add functionality in places Modules 13 - 14: Emerging Network
where wireless access points cannot be used or cannot reach devices.​ Technologies Exam Answers

[PT Skills] ENSA Practice PT Skills

8. A networking technician is working on the wireless network at a medical clinic. The Assessment (PTSA)
technician accidentally sets up the wireless network so that patients can see the medical
records data of other patients. Which of the four network characteristics has been violated [Final Skills] ENSA Final Skills Exam
in this situation? (PTSA)

ENSAv7 Practice Final Exam

CCNA 3 v7 FINAL Exam Answers

CCNA Certification Practice Exam

fault tolerance
scalability
security
Quality of Service (QoS)
reliability

Explanation: Network security includes protecting the confidentiality of data that is on the
network. In this case, because confidential data has been made available to unauthorized
users, the security characteristic of the network has failed.

9. Match each characteristic to its corresponding Internet connectivity type. (Not all
options are used.)

Recent Comments
ITN (Version 7.00) – Basic Network Connectivity and Communications Exam 5
Networxxx on CCNP ENARSI 300-410
Dumps Full Questions with VCE & PDF
Ammar on CCNA 200-301 Dumps Full
Questions – Exam Study Guide & Free
dkonly on CCIE/CCNP 350-401 ENCOR
Dumps Full Questions with VCE & PDF
warda LB on CCNA 1 v7.0 Final Exam
Answers Full – Introduction to Networks
blender on CCNA1 v7.0: ITN Practice PT
Skills Assessment (PTSA) Answers

[Cert] CCNA 200-301 Exam

 Explanation: DSL is an always-on, high bandwidth connection that runs over telephone
lines. Cable uses the same coaxial cable that carries television signals into the home to
provide Internet access. Dialup telephone is much slower than either DSL or cable, but is the
least expensive option for home users because it can use any telephone line and a simple
modem. Satellite requires a clear line of sight and is affected by trees and other obstructions.
None of these typical home options use dedicated leased lines such as T1/E1 and T3/E3.

10. What two criteria are used to help select a network medium from various network
media? (Choose two.)

the types of data that need to be prioritized

the cost of the end devices utilized in the network
the distance the selected medium can successfully carry a signal
the number of intermediate devices installed in the network
the environment where the selected medium is to be installed

Explanation: Criteria for choosing a network medium are the distance the selected medium
can successfully carry a signal, the environment in which the selected medium is to be
installed, the amount of data and the speed at which the data must be transmitted, and the
cost of the medium and its installation.
report this ad
11. What type of network traffic requires QoS?

email
on-line purchasing
video conferencing
wiki
12. A user is implementing security on a small office network. Which two actions would
provide the minimum security requirements for this network? (Choose two.)

implementing a firewall
installing a wireless network
installing antivirus software
implementing an intrusion detection system
adding a dedicated intrusion prevention device

Explanation: Technically complex security measures such as intrusion prevention and

intrusion prevention systems are usually associated with business networks rather than
home networks. Installing antivirus software, antimalware software, and implementing a
firewall will usually be the minimum requirements for home networks. Installing a home
wireless network will not improve network security, and will require further security actions to
be taken.

13. Passwords can be used to restrict access to all or parts of the Cisco IOS. Select the
modes and interfaces that can be protected with passwords. (Choose three.)

VTY interface
console interface
Ethernet interface
boot IOS mode
privileged EXEC mode
router configuration mode

Explanation: Access to the VTY and console interfaces can be restricted using passwords.
Out-of-band management of the router can be restricted in both user EXEC and privileged
EXEC modes.

14. Which interface allows remote management of a Layer 2 switch?

the AUX interface

the console port interface
the switch virtual interface
the first Ethernet port interface

Explanation: In a Layer 2 switch, there is a switch virtual interface (SVI) that provides a
means for remotely managing the device.

15. What function does pressing the Tab key have when entering a command in IOS?
 It aborts the current command and returns to configuration mode.
It exits configuration mode and returns to user EXEC mode.
It moves the cursor to the beginning of the next line.
It completes the remainder of a partially typed word in a command.

Explanation: Pressing the Tab key after a command has been partially typed will cause the
IOS to complete the rest of the command.

16. While trying to solve a network issue, a technician made multiple changes to the
current router configuration file. The changes did not solve the problem and were not
saved. What action can the technician take to discard the changes and work with the file in
NVRAM?

Issue the reload command without saving the running configuration.

Delete the vlan.dat file and reboot the device.
Close and reopen the terminal emulation software.
Issue the copy startup-config running-config command.

Explanation: The technician does not want to make any mistakes trying to remove all the
changes that were done to the running configuration file. The solution is to reboot the router
without saving the running configuration. The copy startup-config running-config command
does not overwrite the running configuration file with the configuration file stored in NVRAM,
but rather it just has an additive effect.

17. An administrator uses the Ctrl-Shift-6 key combination on a switch after issuing the
ping command. What is the purpose of using these keystrokes?

to restart the ping process

to interrupt the ping process
to exit to a different configuration mode
to allow the user to complete the command

Explanation: To interrupt an IOS process such as ping or traceroute, a user enters the Ctrl-
Shift-6 key combination. Tab completes the remainder of parameters or arguments within a
command. To exit from configuration mode to privileged mode use the Ctrl-Z keystroke.
CTRL-R will redisplay the line just typed, thus making it easier for the user to press Enter
and reissue the ping command.

18. Refer to the exhibit. A network administrator is configuring access control to switch
SW1. If the administrator uses a console connection to connect to the switch, which
password is needed to access user EXEC mode?
 CCNA-1-v7-Modules-1-3-Basic Network Connectivity and
Communications Exam Answers 14

letmein
secretin
lineconin
linevtyin

Explanation: Telnet accesses a network device through the virtual interface configured with
the line VTY command. The password configured under this is required to access the user
EXEC mode. The password configured under the line console 0 command is required to
gain entry through the console port, and the enable and enable secret passwords are used
to allow entry into the privileged EXEC mode.

19. A technician configures a switch with these commands:

SwitchA(config)# interface vlan 1

SwitchA(config-if)# ip address 192.168.1.1 255.255.255.0

SwitchA(config-if)# no shutdown

What is the technician configuring?

Telnet access
SVI
password encryption
physical switchport access

Explanation: For a switch to have an IP address, a switch virtual interface must be

configured. This allows the switch to be managed remotely over the network.

20. Which command or key combination allows a user to return to the previous level in the
command hierarchy?

end
exit
Ctrl-Z
Ctrl-C

Explanation: End and CTRL-Z return the user to the privileged EXEC mode. Ctrl-C ends a
command in process. The exit command returns the user to the previous level.

21. What are two characteristics of RAM on a Cisco device? (Choose two.)

RAM provides nonvolatile storage.

The configuration that is actively running on the device is stored in RAM.
The contents of RAM are lost during a power cycle.
RAM is a component in Cisco switches but not in Cisco routers.
RAM is able to store multiple versions of IOS and configuration files.

Explanation: RAM stores data that is used by the device to support network operations. The
running configuration is stored in RAM. This type of memory is considered volatile memory
because data is lost during a power cycle. Flash memory stores the IOS and delivers a copy
of the IOS into RAM when a device is powered on. Flash memory is nonvolatile since it
retains stored contents during a loss of power.

22. Which two host names follow the guidelines for naming conventions on Cisco IOS
devices? (Choose two.)

Branch2!
RM-3-Switch-2A4
Floor(15)
HO Floor 17
SwBranch799

Explanation: Some guidelines for naming conventions are that names should:

Start with a letter

 Contain no spaces

End with a letter or digit

Use only letters, digits, and dashes

Be less than 64 characters in length

23. How is SSH different from Telnet?

SSH makes connections over the network, whereas Telnet is for out-of-band access.
SSH provides security to remote sessions by encrypting messages and using user
authentication. Telnet is considered insecure and sends messages in plaintext.
SSH requires the use of the PuTTY terminal emulation program. Tera Term must be used to
connect to devices through the use of Telnet.
SSH must be configured over an active network connection, whereas Telnet is used to
connect to a device from a console connection.

Explanation: SSH is the preferred protocol for connecting to a device operating system over
the network because it is much more secure than Telnet. Both SSH and Telnet are used to
connect to devices over the network, and so are both used in-band. PuTTY and Terra Term
can be used to make both SSH and Telnet connections.

24. An administrator is configuring a switch console port with a password. In what order
will the administrator travel through the IOS modes of operation in order to reach the
mode in which the configuration commands will be entered? (Not all options are used.)

CCNA-1-v7-Modules-1-3-Basic Network Connectivity and Communications Exam Answers 24

Explanation: The configuration mode that the administrator first encounters is user EXEC
mode. After the enable command is entered, the next mode is privileged EXEC mode. From
there, the configure terminal command is entered to move to global configuration mode.
Finally, the administrator enters the line console 0 command to enter the mode in which the
configuration will be entered.

25. What are three characteristics of an SVI? (Choose three.)

It is designed as a security protocol to protect switch ports.

 It is not associated with any physical interface on a switch.
It is a special interface that allows connectivity by different types of media.
It is required to allow connectivity by any device at any location.
It provides a means to remotely manage a switch.
It is associated with VLAN1 by default.

Explanation: Switches have one or more switch virtual interfaces (SVIs). SVIs are created
in software since there is no physical hardware associated with them. Virtual interfaces
provide a means to remotely manage a switch over a network that is using IP. Each switch
comes with one SVI appearing in the default configuration “out-of-the-box.” The default SVI
interface is VLAN1.

26. What command is used to verify the condition of the switch interfaces, including the
status of the interfaces and a configured IP address?

ipconfig
ping
traceroute
show ip interface brief

Explanation: The show ip interface brief command is used to display a brief synopsis of the
condition of the device interfaces. The ipconfig command is used to verify TCP/IP properties
on a host. The ping command is used to verify Layer 3 connectivity. The traceroute
command is used to trace the network path from source to destination.

27. Match the description with the associated IOS mode. (Not all options are used.)

28. Match the definitions to their respective CLI hot keys and shortcuts. (Not all options
are used.)

 Explanation: The shortcuts with their functions are as follows:

– Tab – Completes the remainder of a partially typed command or keyword

– Space bar – displays the next screen

– ? – provides context-sensitive help

– Up Arrow – Allows user to scroll backward through former commands

– Ctrl-C – cancels any command currently being entered and returns directly to privileged
EXEC mode

– Ctrl-Shift-6 – Allows the user to interrupt an IOS process such as ping or traceroute

29. In the show running-config command, which part of the syntax is represented by
running-config?

the command
a keyword
a variable
a prompt

Explanation: The first part of the syntax, show, is the command, and the second part of the
syntax, running-config, is the keyword. The keyword specifies what should be displayed as
the output of the show command.

30. After making configuration changes on a Cisco switch, a network administrator issues
a copy running-config startup-config command. What is the result of issuing this
command?

The new configuration will be stored in flash memory.

The new configuration will be loaded if the switch is restarted.
The current IOS file will be replaced with the newly configured file.
The configuration changes will be removed and the original configuration will be restored.

Explanation: With the copy running-config startup-config command, the

content of the current operating configuration replaces the startup configuration file stored in
NVRAM. The configuration file saved in NVRAM will be loaded when the device is restarted.

31. What command will prevent all unencrypted passwords from displaying in plain text in
a configuration file?

(config)# enable password secret

(config)# enable secret Secret_Password
 (config-line)# password secret
(config)# service password-encryption
(config)# enable secret Encrypted_Password

Explanation: To prevent all configured passwords from appearing in plain text in

configuration files, an administrator can execute the service password-encryption command.
This command encrypts all configured passwords in the configuration file.

32. A network administrator enters the service password-encryption command into the
configuration mode of a router. What does this command accomplish?

This command encrypts passwords as they are transmitted across serial WAN links.
This command prevents someone from viewing the running configuration
passwords.
This command enables a strong encryption algorithm for the enable secret password
command.
This command automatically encrypts passwords in configuration files that are currently
stored in NVRAM.
This command provides an exclusive encrypted password for external service personnel
who are required to do router maintenance.

Explanation: The startup-config and running-config files display most passwords in

plaintext. Use the service password-encryption global config command to encrypt all
plaintext passwords in these files.

33. What method can be used by two computers to ensure that packets are not dropped
because too much data is being sent too quickly?

encapsulation
flow control
access method
response timeout

Explanation: In order for two computers to be able to communicate effectively, there must
be a mechanism that allows both the source and destination to set the timing of the
transmission and receipt of data. Flow control allows for this by ensuring that data is not sent
too fast for it to be received properly.

34. Which statement accurately describes a TCP/IP encapsulation process when a PC is

sending data to the network?

Data is sent from the internet layer to the network access layer.
Packets are sent from the network access layer to the transport layer.
Segments are sent from the transport layer to the internet layer.
Frames are sent from the network access layer to the internet layer.

Explanation: When the data is traveling from the PC to the network, the transport layer
sends segments to the internet layer. The internet layer sends packets to the network access
layer, which creates frames and then converts the frames to bits. The bits are released to the
network media.

35. What three application layer protocols are part of the TCP/IP protocol suite? (Choose
three.)

ARP
DHCP
DNS
FTP
NAT
 PPP

Explanation: DNS, DHCP, and FTP are all application layer protocols in the TCP/IP protocol
suite. ARP and PPP are network access layer protocols, and NAT is an internet layer
protocol in the TCP/IP protocol suite.

36. Match the description to the organization. (Not all options are used.)

37. Which name is assigned to the transport layer PDU?

bits
data
frame
packet
segment

Explanation: Application data is passed down the protocol stack on its way to be
transmitted across the network media. During the process, various protocols add information
to it at each level. At each stage of the process, a PDU (protocol data unit) has a different
name to reflect its new functions. The PDUs are named according to the protocols of the
TCP/IP suite:

Data – The general term for the PDU used at the application layer.

Segment – transport layer PDU

Packet – network layer PDU

Frame – data link layer PDU

Bits – A physical layer PDU used when physically transmitting data over the medium

38. When IPv4 addressing is manually configured on a web server, which property of the
IPv4 configuration identifies the network and host portion for an IPv4 address?

DNS server address

subnet mask
default gateway
DHCP server address

Explanation: There are several components that need to be entered when configuring IPv4
for an end device:

IPv4 address – uniquely identifies an end device on the network

Subnet mask – determines the network address portion and host portion for an IPv4 address

Default gateway – the IP address of the router interface used for communicating with hosts
in another network

DNS server address – the IP address of the Domain Name System (DNS) server

 DHCP server address (if DHCP is used) is not configured manually on end devices. It will be
provided by a DHCP server when an end device requests an IP address.

39. What process involves placing one PDU inside of another PDU?

encapsulation
encoding
segmentation
flow control

Explanation: When a message is placed inside of another message, this is known as

encapsulation. On networks, encapsulation takes place when one protocol data unit is
carried inside of the data field of the next lower protocol data unit.

40. What layer is responsible for routing messages through an internetwork in the TCP/IP
model?

internet
transport
network access
session

Explanation: The TCP/IP model consists of four layers: application, transport, internet, and
network access. Of these four layers, it is the internet layer that is responsible for routing
messages. The session layer is not part of the TCP/IP model but is rather part of the OSI
model.

41. For the TCP/IP protocol suite, what is the correct order of events when a Telnet
message is being prepared to be sent over the network?

CCNA-1-v7-Modules-1-3-Basic Network Connectivity and Communications Exam Answers 41

42. Which PDU format is used when bits are received from the network medium by the NIC
of a host?

file
frame
packet
segment

Explanation: When received at the physical layer of a host, the bits are formatted into a
frame at the data link layer. A packet is the PDU at the network layer. A segment is the PDU
at the transport layer. A file is a data structure that may be used at the application layer.

43. Refer to the exhibit. ServerB is attempting to contact HostA. Which two statements
correctly identify the addressing that ServerB will generate in the process? (Choose two.)
 ServerB will generate a packet with the destination IP address of RouterB.
ServerB will generate a frame with the destination MAC address of SwitchB.
ServerB will generate a packet with the destination IP address of RouterA.
ServerB will generate a frame with the destination MAC address of RouterB.
ServerB will generate a packet with the destination IP address of HostA.
ServerB will generate a frame with the destination MAC address of RouterA.

Explanation: In order to send data to HostA, ServerB will generate a packet that contains
the IP address of the destination device on the remote network and a frame that contains the
MAC address of the default gateway device on the local network.

44. Which method allows a computer to react accordingly when it requests data from a
server and the server takes too long to respond?

encapsulation
flow control
access method
response timeout

Explanation: If a computer makes a request and does not hear a response within an
acceptable amount of time, the computer assumes that no answer is coming and reacts
accordingly.

45. A web client is receiving a response for a web page from a web server. From the
perspective of the client, what is the correct order of the protocol stack that is used to
decode the received transmission?

Ethernet, IP, TCP, HTTP

HTTP, TCP, IP, Ethernet
Ethernet, TCP, IP, HTTP
HTTP, Ethernet, IP, TCP

Explanation:
1. HTTP governs the way that a web server and client interact.

2. TCP manages individual conversations between web servers and clients.

3. IP is responsible for delivery across the best path to the destination.

4. Ethernet takes the packet from IP and formats it for transmission.

46. Which two OSI model layers have the same functionality as a single layer of the TCP/IP
model? (Choose two.)

data link
network
physical
session
transport

Explanation: The OSI data link and physical layers together are equivalent to the TCP/IP
network access layer. The OSI transport layer is functionally equivalent to the TCP/IP
transport layer, and the OSI network layer is equivalent to the TCP/IP internet layer. The OSI
 application, presentation, and session layers are functionally equivalent to the application
layer within the TCP/IP model.

47. At which layer of the OSI model would a logical address be added during
encapsulation?

physical layer
data link layer
network layer
transport layer

Explanation: Logical addresses, also known as IP addresses, are added at the network
layer. Physical addresses are edded at the data link layer. Port addresses are added at the
transport layer. No addresses are added at the physical layer.

48. What is a characteristic of multicast messages?

They are sent to a select group of hosts.

They are sent to all hosts on a network.
They must be acknowledged.
They are sent to a single destination.

Explanation: Multicast is a one-to-many type of communication. Multicast messages are

addressed to a specific multicast group.

49. Which statement is correct about network protocols?

Network protocols define the type of hardware that is used and how it is mounted in racks.
They define how messages are exchanged between the source and the destination.
They all function in the network access layer of TCP/IP.
They are only required for exchange of messages between devices on remote networks.

Explanation: Network protocols are implemented in hardware, or software, or both. They

interact with each other within different layers of a protocol stack. Protocols have nothing to
do with the installation of the network equipment. Network protocols are required to
exchange information between source and destination devices in both local and remote
networks.

50. What is an advantage of network devices using open standard protocols?

Network communications is confined to data transfers between devices from the same
vendor.
A client host and a server running different operating systems can successfully
exchange data.
Internet access can be controlled by a single ISP in each market.
Competition and innovation are limited to specific types of products.

Explanation: An advantage of network devices implementing open standard protocols, such

as from the TCP/IP suite, is that clients and servers running different operating systems can
communicate with each other. Open standard protocols facilitate innovation and competition
between vendors and across markets, and can reduce the occurrence of monopolies in
networking markets.

51. Which device performs the function of determining the path that messages should take
through internetworks?

a router
a firewall
a web server
a DSL modem
 Explanation: A router is used to determine the path that the messages should take through
the network. A firewall is used to filter incoming and outgoing traffic. A DSL modem is used
to provide Internet connection for a home or an organization.

52. Open the PT Activity. Perform the tasks in the activity instructions and then answer the
question.

CCNA-1-v7-Modules-1-3-Basic Network
Connectivity and Communications Exam
Answers 52

[sociallocker id=”54558″]

Modules 1 - 3: Basic Network Connectivity and

Communications Exam - Packet Tracer
 0.00 KB
 4240
DOWNLOAD
downloads

...

[/sociallocker]

What is the IP address of the switch virtual interface (SVI) on Switch0?

192.168.5.10
192.168.10.5
192.168.10.1
192.168.5.0

Explanation: After the enable command is issued, the show running-configuration

command or the show ip interfaces brief command will display the IP address of the switch
virtual interface (SVI).

53. Why would a Layer 2 switch need an IP address?

to enable the switch to send broadcast frames to attached PCs

to enable the switch to function as a default gateway
to enable the switch to be managed remotely
to enable the switch to receive frames from attached PCs

Explanation: A switch, as a Layer 2 device, does not need an IP address to transmit frames
to attached devices. However, when a switch is accessed remotely through the network, it
must have a Layer 3 address. The IP address must be applied to a virtual interface rather
than to a physical interface. Routers, not switches, function as default gateways.

54. Refer to the exhibit. An administrator is trying to configure the switch but receives the
error message that is displayed in the exhibit. What is the problem?

CCNA-1-v7-Modules-1-3-Basic Network
Connectivity and Communications Exam
Answers 54

The entire command, configure terminal, must be used.

The administrator is already in global configuration mode.
The administrator must first enter privileged EXEC mode before issuing the
command.
The administrator must connect via the console port to access global configuration mode.

Explanation: In order to enter global configuration mode, the command configure terminal,
or a shortened version such as config t, must be entered from privileged EXEC mode. In this
scenario the administrator is in user EXEC mode, as indicated by the > symbol after the
hostname. The administrator would need to use the enable command to move into privileged
EXEC mode before entering the configure terminal command.

55. What term describes a network owned by one organization that provides safe and
secure access to individuals who work for a different organization?
 extranet
cloud
BYOD
quality of service
56. What term describes storing personal files on servers over the internet to provide
access anywhere, anytime, and on any device?

cloud
BYOD
quality of service
converged network
57. What term describes a network where one computer can be both client and server?

peer-to-peer
cloud
BYOD
quality of service
58. What term describes a type of network used by people who work from home or from a
small remote office?

SOHO network
BYOD
quality of service
converged network
59. What term describes a computing model where server software runs on dedicated
computers?

client/server
internet
intranet
extranet
60. What term describes a type of network used by people who work from home or from a
small remote office?

SOHO network
internet
intranet
extranet
61. What term describes a technology that allows devices to connect to the LAN using an
electrical outlet?

powerline networking
internet
intranet
extranet
62. What term describes a policy that allows network devices to manage the flow of data to
give priority to voice and video?

quality of service
internet
intranet
extranet
63. What term describes a private collection of LANs and WANs that belongs to an
organization?

intranet
internet
extranet
peer-to-peer
64. What term describes the ability to use personal devices across a business or campus
network?

BYOD
internet
intranet
extranet
65. At which OSI layer is a source IP address added to a PDU during the encapsulation
process?

network layer
 data link layer
transport layer
application layer
66. At which OSI layer is a destination port number added to a PDU during the
encapsulation process?

transport layer
data link layer
network layer
application layer
67. At which OSI layer is data added to a PDU during the encapsulation process?

application layer
data link layer
network layer
transport layer
68. At which OSI layer is a source IP address added to a PDU during the encapsulation
process?

network layer
data link layer
application layer
presentation layer
69. Which of the following is the name for all computers connected to a network that
participate directly in network communication?

Servers
Intermediary device
Host media
70. At which OSI layer is a destination IP address added to a PDU during the encapsulation
process?

network layer
application layer
transport layer
presentation layer
71. At which OSI layer is a source MAC address added to a PDU during the encapsulation
process?

data link layer

application layer
transport layer
presentation layer
72. At which OSI layer is a source port number added to a PDU during the encapsulation
process?

transport layer
application layer
network layer
presentation layer
data link layer
73. At which OSI layer is a destination MAC address added to a PDU during the
encapsulation process?

data link layer

transport layer
application layer
network layer
74. When data is encoded as pulses of light, which media is being used to transmit the
data?

Wireless
Fire optic cable
Copper cable
75. Which two devices are intermediary devices? (Choose two)

Host
Router
 Switch
Servers

Related Articles

report this ad

Join the discussion

76 COMMENTS

 Comment search...

Pepa Jamnický dsf  1 month ago

very good wether todaj, maine svarta is god

0 -1 Reply

Muhammed  1 month ago

güzel 🇹🇷🇹🇷🇹🇷🇹🇷
2 -2 Reply

ikot  3 months ago

Which attack slows down or crashes equipment and programs?

1. Firewall
2. Virus, worm, or Trojan horse
3. Zero-day or Zero-hour
4. Virtual Private Network (VPN)
5. Denial of Service (DoS)

Which option creates a secure connection for remote workers?

1. Firewall
2. Virus, worm, or Trojan horse
3. Zero-day or Zero-hour
4. Virtual Private Network (VPN)
5. Denial of Service (DoS)

Which option blocks unauthorized access to your network?

1. Firewall
2. Virus, worm, or Trojan horse
3. Zero-day or Zero-hour
4. Virtual Private Network (VPN)
5. Denial of Service (DoS)

Which option describes a network attack that occurs on the first day that a vulnerability
becomes known?

1. Firewall
2. Virus, worm, or Trojan horse
3. Zero-day or Zero-hour
4. Virtual Private Network (VPN)
5. Denial of Service (DoS)

Which option describes malicious code running on user devices?

1. Firewall
2. Virus, worm, or Trojan horse
3. Zero-day or Zero-hour
4. Virtual Private Network (VPN)
 5. Denial of Service (DoS)

7 -3 Reply

ikot  3 months ago

Which feature is a good conferencing tool to use with others who are located elsewhere in
your city, or even in another country?

1. BYOD
2. Video communications
3. Cloud computing

Which feature describes using personal tools to access information and communicate across
a business or campus network?

1. BYOD
2. Video communications
3. Cloud computing

Which feature contains options such as Public, Private, Custom and Hybrid?

1. BYOD
2. Video communications
3. Cloud computing

Which feature is being used when connecting a device to the network using an electrical
outlet?

1. Smart home technology

2. Powerline
3. Wireless broadband

Which feature uses the same cellular technology as a smart phone?

1. Smart home technology

2. Powerline
3. Wireless broadband

 Last edited 3 months ago by ikot

6 -2 Reply

ikot  3 months ago

When designers follow accepted standards and protocols, which of the four basic
characteristics of network architecture is achieved?

1. fault tolerance
2. Scalability
3. QoS
4. Security

Confidentiality, integrity, and availability are requirements of which of the four basic
characteristics of network architecture?

1. fault tolerance
2. Scalability
3. QoS
4. Security

With which type of policy, a router can manage the flow of data and voice traffic, giving priority
to voice communications if the network experiences congestion?

1. fault tolerance
2. Scalability
3. QoS
4. Security

Having multiple paths to a destination is known as redundancy. This is an example of which

characteristic of network architecture?

1. fault tolerance
2. Scalability
3. QoS
4. Security

2 -3 Reply

ikot  3 months ago

Which network infrastructure provides access to users and end devices in a small
geographical area, which is typically a network in a department in an enterprise, a home, or
small business?
 1. Extranet
2. Intranet
3. LAN
4. WAN

Which network infrastructure might an organization use to provide secure and safe access to
individuals who work for a different organization but require access to the organization’s data?

1. Extranet
2. Intranet
3. LAN
4. WAN

Which network infrastructure provides access to other networks over a large geographical
area, which is often owned and managed by a telecommunications service provider?

1. Extranet
2. Intranet
3. LAN
4. WAN

3 -6 Reply

someone  6 months ago

is there is a way to delete the mark of the answers and after answering them to view it again ?

 Last edited 6 months ago by Ahmed Hamza

5 -1 Reply View Replies (1) 

Anything  6 months ago

Good quiz!!

0 -8 Reply

Anonymous  7 months ago

In the show running-config command, which part of the syntax is represented by running-

config ?

a keyword
a variable
a prompt
the command
Navigation Bar

19 -3 Reply View Replies (5) 

balvinder  7 months ago

To prepare for exam, only CCNAv7 Questions are enough or should i also complete CCNAv6 .

Waiting for reply

Thanks

1 -2 Reply View Replies (1) 

Lucky  7 months ago

Nice job guys

0 -1 Reply

Erdenebat  8 months ago

thanks guys

0 -1 Reply

Guess  8 months ago

Great job thanks guys.

4 -1 Reply

Ali  9 months ago

It’s also same questions in 2021. Good luck

 Last edited 9 months ago by Ali

16 -2 Reply

idris wale(@idriswale2001)  10 months ago