Scribd Logo
Upload

Welcome to Scribd!

  • 27 views

    Circular Slab Design

    Uploaded by

    monali
    The document provides specifications for reinforcing steel bars in a concrete beam. The beam is 3.69 meters long, 82mm deep, and made of M25 grade concrete. It must support a total load of 58 kN/m2. Based on the load calculations, the required moment at the center is 37.02 kN.m. The reinforcement design calls for 12mm diameter bars spaced 127.72mm apart in a double layer at the bottom of the beam to provide a total bar area of 885.07mm2.

    Copyright:

    © All Rights Reserved
    Download as ODS, PDF, TXT or read online from Scribd

    Circular Slab Design

    Uploaded by

    monali
    27 views1 page
    The document provides specifications for reinforcing steel bars in a concrete beam. The beam is 3.69 meters long, 82mm deep, and made of M25 grade concrete. It must support a total load of 58 kN/m2. Based on the load calculations, the required moment at the center is 37.02 kN.m. The reinforcement design calls for 12mm diameter bars spaced 127.72mm apart in a double layer at the bottom of the beam to provide a total bar area of 885.07mm2.

    Original Title

    circular slab design

    Copyright

    © © All Rights Reserved

    Available Formats

    ODS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications for reinforcing steel bars in a concrete beam. The beam is 3.69 meters long, 82mm deep, and made of M25 grade concrete. It must support a total load of 58 kN/m2. Based on the load calculations, the required moment at the center is 37.02 kN.m. The reinforcement design calls for 12mm diameter bars spaced 127.72mm apart in a double layer at the bottom of the beam to provide a total bar area of 885.07mm2.

    Copyright:

    © All Rights Reserved
    Download as ODS, PDF, TXT or read online from Scribd
    Download as ods, pdf, or txt
    27 views1 page

    Circular Slab Design

    Uploaded by

    monali
    The document provides specifications for reinforcing steel bars in a concrete beam. The beam is 3.69 meters long, 82mm deep, and made of M25 grade concrete. It must support a total load of 58 kN/m2. Based on the load calculations, the required moment at the center is 37.02 kN.m. The reinforcement design calls for 12mm diameter bars spaced 127.72mm apart in a double layer at the bottom of the beam to provide a total bar area of 885.07mm2.

    Copyright:

    © All Rights Reserved
    Download as ODS, PDF, TXT or read online from Scribd
    Download as ods, pdf, or txt
    of 1

    Sheet1

    l/d 45 Concrete grade M25


    l 3.69 m Fe 500
    d 82 mm
    providing D 200 mm
    load calc
    self weight 5 kN/m2
    SDL 53 kN/m2
    total 58 kN/m2

    circumferential/radial moment 3/16 w a2


    at center 37.02 kN.m

    dia of bar 12 mm
    d 162 mm

    pt 0.55
    Ast 885.07 mm2

    spacing 127.72 mm

    providing T 12 at 125 mm c/c both ways bottom

    Page 1

    You might also like