Scribd
Upload
158 views2 pages

Production Report

This production report from Corrosion Protection Engineers India details the process parameters for various corrosion protection processes including stress relieving, abrasive blasting, painting, and thermal spray painting of zinc and aluminum coatings. It lists the required and actual parameters for temperature, time, air pressure, grit weights, feed methods, pressures, speeds, and voltages for each of the processes. The report includes the customer name, description, date, process used, and any remarks for each job.

Uploaded by

Mythri Metallizing Pvt Ltd Projects
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
158 views2 pages

Production Report

This production report from Corrosion Protection Engineers India details the process parameters for various corrosion protection processes including stress relieving, abrasive blasting, painting, and thermal spray painting of zinc and aluminum coatings. It lists the required and actual parameters for temperature, time, air pressure, grit weights, feed methods, pressures, speeds, and voltages for each of the processes. The report includes the customer name, description, date, process used, and any remarks for each job.

Uploaded by

Mythri Metallizing Pvt Ltd Projects
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

CORROSION PROTECTION ENGINEERS INDIA Doc.Ref.

: CPE/PRD/02
Rev.No. : 01
PRODUCTION REPORT Rev.Date: 08/11/2020
TEMPERATURE: HUMIDITY:
SPECIFICATION
CUSTOMER NAME DESCRIPTION DATE PROCESS PROCESS PARAMETER REMARKS
REQUIRED ACTUAL
Temperature 600 - 620
Stress releiving
Time 3 hrs
Air pressure 5 to 7 Kg/cm²
Abrassive blasting Steel grit - G14/G16 Weight 300 to 500 kg
( Steel
Grit/Silica sand Silica sand Quartz - 1 to 2mm
quartz/Al2O) Weight
Copper Slag
Pressure of Gun 2.5 to 3 Kg/cm²
Painting Feed Manual
brush/roller 2 coats
Pressure of Gun 4 to 5 Kg/cm²
Thermal spray Speed 1200 rpm
painting (Zinc coating
/ Aluminium coating Voltage for Zinc coating 20-25 volts
Voltage for Aluminium coating 35-40 volts

TEMPERATURE: HUMIDITY:
SPECIFICATION
CUSTOMER NAME DESCRIPTION DATE PROCESS PROCESS PARAMETER REMARKS
REQUIRED ACTUAL
Temperature 600 - 620
Stress releiving
Time 3 hrs
Air pressure 5 to 7 Kg/cm²
Abrassive blasting Steel grit - G14/G16 Weight 300 to 500 kg
( Steel
Grit/Silica sand Silica sand Quartz - 1 to 2mm
quartz/Al2O) Weight
Copper Slag
Pressure of Gun 2.5 to 3 Kg/cm²
Painting Feed Manual
brush/roller 2 coats
Pressure of Gun 4 to 5 Kg/cm²
Thermal spray Speed 1200 rpm
painting (Zinc coating
/ Aluminium coating Voltage for Zinc coating 20-25 volts
Voltage for Aluminium coating 35-40 volts
CORROSION PROTECTION ENGINEERS INDIA Doc.Ref.: CPE/PRD/02
Rev.No. : 01
PRODUCTION REPORT Rev.Date: 08/11/2020
TEMPERATURE: HUMIDITY:
SPECIFICATION
CUSTOMER NAME DESCRIPTION DATE PROCESS PROCESS PARAMETER REMARKS
REQUIRED ACTUAL
Temperature 600 - 620
Stress releiving
Time 3 hrs
Air pressure 5 to 7 Kg/cm²
Abrassive blasting Steel grit - G14/G16 Weight 300 to 500 kg
( Steel
Grit/Silica sand Silica sand Quartz - 1 to 2mm
quartz/Al2O) Weight
Copper Slag
Pressure of Gun 2.5 to 3 Kg/cm²
Painting Feed Manual
brush/roller 2 coats
Pressure of Gun 4 to 5 Kg/cm²
Thermal spray Speed 1200 rpm
painting (Zinc coating
Voltage for Zinc coating 20-25 volts
/ Aluminium coating
Voltage for Aluminium coating 35-40 volts
TEMPERATURE: HUMIDITY:
SPECIFICATION
CUSTOMER NAME DESCRIPTION DATE PROCESS PROCESS PARAMETER REMARKS
REQUIRED ACTUAL
Temperature 600 - 620
Stress releiving
Time 3 hrs
Air pressure 5 to 7 Kg/cm²
Abrassive blasting Steel grit - G14/G16 Weight 300 to 500 kg
( Steel
Silica sand Quartz - 1 to 2mm
Grit/Silica sand
quartz/Al2O) Weight
Copper Slag
Pressure of Gun 2.5 to 3 Kg/cm²
Painting Feed Manual
brush/roller 2 coats
Pressure of Gun 4 to 5 Kg/cm²
Thermal spray
Speed 1200 rpm
painting (Zinc coating
/ Aluminium coating Voltage for Zinc coating 20-25 volts
Voltage for Aluminium coating 35-40 volts

You might also like