Scribd Logo
Upload

Welcome to Scribd!

  • 4K views

    Carillo Rod Bolts Tech Info

    Uploaded by

    agrandi12
    The Carrillo connecting rod is a high-quality precision part that will perform well when properly installed and maintained. Lubricate the bolts and torque them using the recommended stretch figures in the table to ensure proper tightening. Clearances for bearings and wrist pins are also specified. Carrillo guarantees the quality of materials and manufacturing but not assembly or modifications by the customer.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Carillo Rod Bolts Tech Info

    Uploaded by

    agrandi12
    4K views1 page
    The Carrillo connecting rod is a high-quality precision part that will perform well when properly installed and maintained. Lubricate the bolts and torque them using the recommended stretch figures in the table to ensure proper tightening. Clearances for bearings and wrist pins are also specified. Carrillo guarantees the quality of materials and manufacturing but not assembly or modifications by the customer.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Carrillo connecting rod is a high-quality precision part that will perform well when properly installed and maintained. Lubricate the bolts and torque them using the recommended stretch figures in the table to ensure proper tightening. Clearances for bearings and wrist pins are also specified. Carrillo guarantees the quality of materials and manufacturing but not assembly or modifications by the customer.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    4K views1 page

    Carillo Rod Bolts Tech Info

    Uploaded by

    agrandi12
    The Carrillo connecting rod is a high-quality precision part that will perform well when properly installed and maintained. Lubricate the bolts and torque them using the recommended stretch figures in the table to ensure proper tightening. Clearances for bearings and wrist pins are also specified. Carrillo guarantees the quality of materials and manufacturing but not assembly or modifications by the customer.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    The CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and

    maintained, will perform


    flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that
    should be helpful in your installation.
    BOLTS
    All bolts should be lubricated under the heads as well as on the threads. We recommend the bolt lube included, or as an alternative, molybde-
    num base paste mixed with engine oil.
    The preferred method to torque the bolt is by using the stretch figure listed in the table below. In order to check bolt stretch, simply fixture one
    rod, leaving the cap portion free from clamping load. Measure both bolt lengths loose, then progressively tighten the bolt until the measured
    increase in length correlates with the figures below. Use the indicated torque reading to tighten all the connecting rods in final assembly.

    STRETCH STRETCH TORQUE TORQUE


    Head
    THREAD TYPE RECOMMENDED RECOMMENDED NOT TO EXCEED NOT TO
    Marking
    English Metric English EXCEED Metric
    1/4 CARR S4 .0040 to .0060in 0.102 to 0.152 275 inlb 31 Nm
    5/16 WMC H5 .0040 to .0060in 0.102 to 0.152 30 ftlb 41 Nm
    5/16 CARR S5 .0050 to .0070in 0.127 to 0.178 40 ftlb 54 Nm
    3/8 WMC H6 .0050 to .0065in 0.127 to 0.165 40 ftlb 54 Nm
    3/8 CARR S6 .0050 to .0070in 0.127 to 0.178 58 ftlb 79 Nm
    7/16 WMC H7 .0050 to .0070in 0.127 to 0.178 70 ftlb 95 Nm
    7/16-1 WMC H71 .0050 to .0070in 0.127 to 0.178 70 ftlb 95 Nm
    7/16 CARR S7 .0050 to .0070in 0.127 to 0.178 100 ftlb 136 Nm
    M8 WMC HM8 .0040 to .0055in 0.102 to 0.140 20 ftlb 27 Nm
    M8-1 CARR SM81 .0040 to .0055in 0.102 to 0.140 30 ftlb 41 Nm
    M8 CARR SM8 .0045 to .0060in 0.114 to 0.152 30 ftlb 41 Nm
    M9 WMC HM9 .0045 to .0060in 0.114 to 0.152 40 ftlb 54 Nm
    M9 CARR SM9 .0045 to .0060in 0.114 to 0.152 45 ftlb 61 Nm
    M10 WMC HM10 .0045 to .0060in 0.114 to 0.152 45 ftlb 61 Nm
    M10 CARR SM10 .0050 to .0070in 0.127 to 0.178 55 ftlb 75 Nm

    DO NOT MAGNAFLUX CARRILLO CONNECTING RODS WITH BOLTS INSTALLED

    CLEARANCES
    Bearing clearances are dictated primarily by the bearing, not by the housing bore of the connecting rods. The connecting rod bore determines
    crush. Bearing clearances vary as to the application, diameter of the journal and bearing design. An approximate factor would be .001 per
    1.000” diameter of crankshaft pin measured at the crown of the bearing surface.
    Wrist pin to bushing clearance is variable per diameter as well. The following is a reference scale:

    WRIST PIN DIAMETER CLEARANCE MAXIMUM CLEARANCE


    .500 to 0.750” .0010” .0016”
    .751 to 1.094” .0012” .0020”

    Prior to disassembly of the connecting rod, number the connecting rod and matching cap. DO NOT use a metal stamp!
    GUARANTEE
    We guarantee the quality of the steel, the forging, the heat treat process, and the dimensional sizes. We have no control over the assembly or
    customer modification of the connecting rod in the engine. There are no further guarantees either expressed or implied by CARRILLO INDUS-
    TRIES or any of their agents or representatives.
    CARRILLO INDUSTRIES reserves the right to alter the design or initiate product changes without incurring liability or obligation with respect to similar products previously manufac-
    tured by this concern.

    You might also like