Orgonite and the curing process Page 1

Wizzers Desk Personal Bioenergy Tools - Orgone Matrix Material Ergonite Orgonite Organite - Construction info & sales-
Radionics Stations -Mobius Coils - EM Pollution Control - DIY Plans & More! - Site Map / Products / Info / Ebooks / Contact /
Legal / Links / Orgonite / Radionics

I am in the process of editing this article for clarity and updating it, as it was written some time ago. The
new text will be available both in a basic form online and an expanded form as an ebook. This text will
continue to be available as part of a free download. All information given here is the considered opinion
of the author. I am not a medical doctor, and you are responsible for your own discretion.

Orgone Matrix Material and the curing processÐ

In other articles, I have mentioned that charging the Ergonite while the resin is curing has a large effect.

To start out with, not all organic components are not equally responsive to charging while the resin cures. Polyester resin, acrylic
resin and pitch all demonstrate this property in significant degrees. The waxes seem a lot less responsive in this area, something
which i attribute to the formation of crystalline structures within the resin while solidification takes place. Polyester ("Fiber Glass")
resin, for example, is well known in conventional scientific circles to have significant electromagnetic attenuation properties. That
means that it absorbs electromagnetic energy. Since energy is never created or destroyed and only changes form, the energy
soaked up by the resin has to go somewhere, doesn't it?

After experimenting for a couple of years, i can comfortably say that the way Ergonite is treated during construction creates at
least a 70% difference in the finished product. In other words, by paying some attention to the thoughts, emotions, energies, etc.
to which the Ergonite is exposed when you make it, you can generally get at least 70% more functionality than you would if you
did not pay attention to these factors.

Now, i would like to point out that the beauty of Ergonite is that you can get that 30% functionality, regardless of how you make it.
It is not NECESSARY to charge the resin while it cures, it is an improvement. And in many cases, 30% functionality is more than
enough to make a significant difference. But if the Ergonite can be made yet more potent, why not do so? If you can optimize the
Ergonite to work with a specific ailment, or to do a chosen task, then it only seems prudent to do so.

There are, imo, 2 main ways in which the Ergonite absorbs a charge / program while it is curing. One way is through the person
making it, and the way that they influence the energy while handling the materials. Another way is to expose the Ergonite to
energies generated by various metaphysical tools while it cures. Obviously, both of these approaches encompass many different
techniques. Both of these two approaches can be used either alone, or in combination with each other. Myself, i generally use a
combination of the two.

It is also possible for the Ergonite to turn out with either a sympathetic or a counteractive effect. The frequencies used in the
following description are just examples. So, if you expose Ergonite to a hertzian frequency of say 15kHz, generated by a device
of some kind, the Ergonite will become more responsive to that 15kHz frequency. The fact that the Ergonite is now more
responsive to 15kHz can be applied in one of two primary ways, depending on what thoughts and intent you expose it to, or what
other frequencies are present. If you expose the resin to 15kHz and leave it at that, the finished Ergonite will tend to amplify the
15kHz frequency effects when stimulated by it. It will tend to produce that frequency effect as part of it's output, converting other
energies it is stimulated with INTO the frequency effect of 15kHz. The same applies if you expose the resin to both a weak 10Hz
signal and a strong 15kHz signal. It will tend to 'capture' the act of 10Hz being drowned out by 15kHz, and have that function
programmed into it. Doing it that way, you are getting a sympathetic effect towards 15kHz.

But suppose you flip it around the other way. Suppose you expose the resin to a 15kHz signal, and at the same time give it a
clear mental impression that you want to dampen out and get rid of 15kHz. If you do it that way, you will get a counteractive
effect, in proportion to the clarity of the mental impression you give the resin. It will tend to respond well to 15kHz, but instead of
amplifying 15kHz, it will dampen it out, and convert 15kHz into other energy 'colors' or frequencies. The same applies if you were
to expose the Ergonite to a strong 10Hz signal and a weak 15kHz signal. It would then capture the act of 15kHz being drowned
out by 10Hz, and have that function as a 'program'.

In reality, the way that different frequencies interact with each other has arguably a bigger effect that the volume of each signal.
There are frequencies that are harmonic to 15kHz, and they tend to boost it. There are frequencies that are discordant to 15kHz,
and they tend to dampen it. So, both the relative strength of each signal and the effects of signals on each other produce an
effect.

By default, Ergonite seems to produce a sympathetic effect to that which excites it during curing. In other words, if you want to
get a counteractive effect, you have to 'tell' it you want a counteractive effect. This, doubtless, is why some tower busters have a
greater effect than others. Many people are programming the Ergonite with a counteractive effect to the tower's signals, whether
or not they are consciously aware of it. Many other people are not, and so the Ergonite is running at varying degrees of
efficiency. Rather than criticizing, it is my hope that this will help people all around to improve their Ergonite manufacture.

http://www.littlemountainsmudge.com/artorgonitecuring.htm 31/01/2006 04:08:11

Orgonite and the curing process Page 2

People who are already doing reiki, visualization, or other traditional metaphysical disciplines will find that whatever energy they
put into the mixture will, to some degree at least, become a permanent part of the finished Ergonite's energy signature. This
applies, of course, whether or not a person is consciously using metaphysical discipline of some variety. Even if a person is not
consciously directing energy into the Ergonite while it cures, their thoughts and emotions, the state of their mind, the things they
are thinking about while working with the materials... these all have some effect on the finished product. It appears to me (so far)
that consciously directing your energy into the Ergonite often produces a greater change in the finished product than not. The
exception to this would be states of great emotional intensity. If you are in a state of emotional excitement, then a part of that
emotional energy will be picked up and integrated into the Ergonite.

So, if you are a person who uses prayers, affirmations, declarations, visualization, intent or the like, then you can program your
Ergonite with these techniques. One thing to bear in mind if using minerals other than quartz crystals is the kinds of jobs that
various minerals are suited to doing. For example, if you are making Ergonite and programming it to get rid of toxins in the body,
then you could make that process either more efficient or less efficient, depending on what minerals you include. If you include
minerals that have the effect of stimulating the body to release toxins, then the mineral and the program are harmonic. If you use
a mineral that stimulates the body to absorb energy but program the Ergonite with a purgative effect, then the result will generally
be a bit less effective. In short, the orgone output spectrum of the finished Ergonite is defined by a COMBINATION of the
ingredients and the programming, so it pays to give a little thought to how you put those 2 factors together.

So what if you are making Ergonite and you inadvertently put a bunch of nasty thoughts / emotions into it? Well, they WILL affect
it somewhat, but not enough to reduce its effectiveness beyond the 30% line, in my experience. They will make it work less well,
but not stop it from working entirely imo. One thing i have discovered is that say, for example, you think 'issue X is horrible'. well,
you don't want the Ergonite to enhance the horrible nature of issue X, obviously. But once you have thought that thought, it is
difficult if not impossible to take it back. So give the Ergonite a counteractive program with respect to issue X. Immediately think
another thought, namely, that you wish to direct the healing / clearing properties of the Ergonite toward issue X, and work on the
problem. This produces Ergonite that works specifically (counteractively) on issue X. Not a bad recovery from a little slip of the
mind. Practitioners of radionics will likely be familiar with this concept, point being the concept is of course transferable to
Ergonite manufacture.

Another example... Some time ago i made some Ergonite TBs which had a few flies fall into the resin while it was curing. I didn't
think it that important, though maybe i felt a little sorry for the flies. The Ergonite came out with a sympathetic effect towards
houseflies. It was amazing to watch how they just couldn't leave it alone. They would be buzzing around the light bulb, and kept
stopping and landing on the TBs, which i must admit i found rather annoying. But at the same time, others have reported success
using TBs to get rid of problematic insect infestations, by including a sample of the insect in the Ergonite. Whether they knew it or
not, and i must assume they did, they included the intent that they wanted a counteractive effect. And they saw that the insect
infestation was reduced. The difference between my TBs attracting the insects cast inside them, and their TBs repelling the
insects cast inside them was simply the difference between a counteractive effect and a sympathetic effect. Again, those
familiar with metaphysics will probably find this familiar territory.

Bearing that in mind, i am sure you will understand why programming the resin with the intent that you want to counteract the
inimical health effects of the HAARP and GWEN towers is worthwhile. Also perhaps this sheds some light on why there exists
such variance in the observable effects of TBs. Without the intent to get a counteractive effect (since if you live in area with
towers the resin is exposed to the signal from the towers while it cures) you will get the cleansing effect in the 30% range. But if
you add the simple thought that you want the Ergonite to have a counteractive effect, you will get much more efficiency, up to
several hundred percent improvement.

Rather than going into detail about how to do visualization or focus your intent, i will just say that your emotions are a big part of
it. For example, if you are making Ergonite to help your sore back, then you want to make sure that the Ergonite is programmed
by imagining a healthy back, free from pain. Or perhaps imagining a sore back turning into a comfortable, pain-free back. You do
not want to program the Ergonite with you wondering if it will work. That saps efficiency. So if you have doubts, well that just
means you are human. We can not always instantly finish up with our doubts or uncertainty. But we can put them out of our
minds for a few minutes. And in those few minutes when we have put our doubts out of our mind and have stopped thinking
about them, that is the time to do your intent or programming or visualization. For posterity, the same thing applies with prayers,
affirmations, declarations, etc., with or without Ergonite.

Ideally, you want to charge the Ergonite for the duration of time it takes to cure. This may or may not be possible. I have found so
far that with the mental impressions, it is best to do it at least 3 times. Since polyester resin actually continues to cure for a long
time after it has solidified, you generally have about a 3 day window of opportunity to charge the resin, though the initial period
when it is solidifying appears to be the most critical. Once the plastic has cured, you cannot reprogram the resin, but you can
reprogram the crystals embedded within it. You can also direct the energy that the Ergonite is producing to a given task with your
intent. Directing the output from the Ergonite is different than charging the resin. Using your Ergonite's energy output is giving the
output a job to do. Charging the resin while it cures is defining what the output will be.

When using a machine to program the Ergonite, depending on how strong the machine is, a ten to 15 minute period of exposure
is often enough to produce an effect, but where possible i often give it up to 72 hours of exposure.

http://www.littlemountainsmudge.com/artorgonitecuring.htm 31/01/2006 04:08:11

Orgonite and the curing process Page 3

If you have a radionics machine, succor punch, pulser, wand, or some other kind of intent amplifier / orgone generator, you can
use that to either charge the Ergonite or enhance the mental impression (intent) that you give the Ergonite. You can also set your
favorite xtal (if you work with xtals) near it while it cures and use that to charge the resin. Varying methods of charging give
varying degrees of success. Any kind of attention to the charging process will produce a more effect than none, i find.

One way you can charge the resin is to devise some means of connecting a quartz crystal wrapped with a mobius coil to the
output of your pc sound card. I have a bit of info about one such device on the ring generator tutorial page. Even a smaller device
such as a succor punch, connected to the output of a pc sound card, provides a very versatile apparatus for charging Ergonite. If
you are unable to to set up something like that, then even using a tone generator and exposing the Ergonite to the sound
produced will charge the resin. I am amazed at Ergonite's ability to accept a program and repeat it almost indefinitely.

Roberto Forcen, at his site Voicesync, has some very impressive sound analysis and sound generation software. One of his
programs that i have worked with a fair amount is called mineral sounds. In his own words, it 'Generates resonant three octave
compound tones from a list of more than 3000 minerals. Tones are generated using powder X-ray Diffraction parameters.' What
i can say is that when i fist started playing with it, i was very impressed. When i run the sounds from this program through my big
mobius-driven orgone generators, the energy produced is very similar in 'feel' and in 'color' to the energy from the minerals
themselves. Aside from using it to program Ergonite with the effects of a mineral i would like to have, but don't have on hand (not
quite the same as having the actual mineral in the Ergonite but close if you let it run several hours), i use it to compliment the
ingredients of the Ergonite. For example, if the Ergonite contains steel, copper and quartz, i will open multiple copies of this
program and charge the Ergonite with the sounds of iron, copper, quartz, and gold. This gives the Ergonite a lot more power
when it is finished.

Sunlight is another wonderful thing to expose the resin to while it cures, and so is moonlight. These two methods of charging the
Ergonite are already in widespread use. Especially with exposing the resin to sunlight, you will often notice a difference in the
visible color of the resin when it has cured, indication that you are in fact doing something and this is not all hocus pocus... ;)

Astrology also has a certain amount of influence on the Ergonite, though not one with which i often work. Using a large orgone
generator to charge it can drown out some of the astrological effects, it would appear. One batch i did during the harmonic
concordance came out very nice, and it appears to have captured some of the intense catalytic energy of the harmonic
concordance.

Another way you can do it is to pour the Ergonite outdoors, preferably in contact with the earth, in a clean vortex or ley line. This
way tends to both stimulate the vortex or ley line and program the Ergonite with a permanent link to the area in which it was
poured. Alternately, you can add some dirt or wood chips from the vortex to the Ergonite and pour it elsewhere. I have used this
technique to link together a few different medicine wheels in the area. Possibly, it could be used to create and/or divert energy
lines in the earth's body, leading to or from the vortex.

While i was proofreading this article, i phoned my friend of several years Chris Gozdzik from diviningmind.com, and asked him if
he thought i had left out anything glaringly obvious. He reminded me about linking, which is another way that you can do several
things with Ergonite, including charging it while it cures. Basically, if you link the Ergonite to the energy from an existing large
source of energy, either by a sample of the source or clear visualization, then the Ergonite will not only pick up the energy from
the existing source as a program, but will also have a permanent link to the energy source. Thanks, Chris :)

And 2 final notes- If you are building a ring generator, power radionics machine, or other large power-driven orgone generator,
first decide what frequencies you plan to use to drive it with. At least pick out a few of the ones you plan to use a lot. Then,
charge the Ergonite for the generator with the frequencies it will be running at. This increases power in the finished generator.

Many of us have noted that Ergonite, once cast, sometimes takes a certain amount of time 'start working'. Charging during curing
dramatically reduces the amount of time that it takes a device to 'start working'.

Well, that about takes up the time i have today, but here are a few of my favorite hertzian frequencies for charging Ergonite, and
some the effects i have observed with them.

741Hz (sine wave) - This is one of the solfeggio tones, and is quite potent imo. When i first started using it i immediately felt a
buildup of energy and subsequent release in the solar plexus and heart chakras. It may be a bit intense for some people at first,
but they should rapidly acclimatize. It appears to have the effect it is reported to by others, that of assisting with finding the
solution to a problem. I use it a fair amount these days, and thanks to whomever it was that posted about it on the yahoo
cloudbusters forum some time ago.

528Hz (sine wave) - This is another one of the solfeggio tones, and it has proven useful for me in manifestation.

5075Hz (square wave) - A frequency i chose myself for use in the driver circuits of the pulsers. It tends to have a grounding,
stabilizing effect. I use it as a multipurpose frequency to drive generators, and to help me calm down when i get cranky ;)

32kHz (square wave) - Another frequency i chose for use in the pulsers, tends to have the opposite effect than 5075Hz, but
meshes well with 5075Hz. I use it for removing blockages in body work, for shielding from energy attacks, and for an aid in the
mental 'reach upwards' involved in meditation and remote viewing. When set to a frequency higher than 20 kHz, NCH toner
produces a lower harmonic of target frequency. Since square waves especially produce many harmonics ranging up and down
the scale, imo you are still getting this frequency (or one close to it) as a harmonic when you use a pc sound card connected to a
coil and xtal.

http://www.littlemountainsmudge.com/artorgonitecuring.htm 31/01/2006 04:08:11

Orgonite and the curing process Page 4

15Hz (square wave) - The frequency many people use to drive their succor punches. It tends to have a solid, relatively stable
effect. Of the low frequencies, it is one commonly used today. It is potent, though imo benefits from the company of a higher
frequency. Useful for shielding from energy attacks. Also, if you have a 15Hz driven SP, then charging your Ergonite with 15Hz
will increase the responsiveness of your Ergonite to your SP.

32Hz/31.7Hz (square or sine wave) - A frequency i first heard of from (i believe) Bruce Stenulson. It has proven very useful as an
aid in programming quartz crystals. Because of it's tendency to carry programming information / intent from the user to a quartz
crystal, it is useful imo for intent amplification, and as a general purpose frequency for driving mobius-powered orgone
generators.

68.635kHz (square or sine wave) - This one of the Hodowanec frequencies. Now, since the upper end of the sound card is well
below this frequency, i am not actually getting this frequency when i put it into the NCH toner program that i use as a signal
generator. When set to a frequency higher than 20 kHz, NCH toner produces a lower harmonic of target frequency. Since
square waves especially produce many harmonics ranging up and down the scale, imo you are still getting this frequency (or one
close to it) as a harmonic. When run through the nch toner, and a mobius/quartz driven orgone generator, it produces an
emission of orgone that is almost all in the violet range. Violet orgone is both soothing and cleansing, good for soul-searching as
well as healing.

For posterity, below is the text file from which i first heard of the solfeggio tones.

1. Ut = 396 = 9

2. Re = 417 = 3

3. Mi = 528 = 6

4. Fa = 639 = 9

5. Sol = 741 = 3

6. La = 852 = 6

UT-quent laxis

1. a syllable used for the first note in the diatonic scale in an early solminzation system and later replaced by do. 2. the syllable
sung to this note in a medieval hymn to St. John the Baptist. <Gk. -Gamut- 1. the entire scale or range; the Gamut of dramatic
emotion from grief to joy. 2. the whole series of recognized musical notes [1425-75]; late ME (Middle English)><ML (Medieval
Latin)-contraction, of Gamma, used to represent the first lowest tone of (G) in the Medieval Scale Ut, Re, Mi, Fa, So, La, Si. <Gk -
Gamma- 1. the third letter of the Greek alphabet. 2. the third in a series of items. 3. a star that is usually the third brightest in a
constellation. 4. a unit of weight equal to one microgram. 5. a unit of magnetic field strength equal to 10 to the fifth power gauss.
(quent: needing), (laxis: loose; axis-an affiliation of two or more nations. Also Axis Powers.)

RE-sonare fibris (Res-o-nance)

1 a: the state of quality of being resonant. b(1) a vibration of large amplitude in a mechanical or electrical system caused by a
relatively small periodic stimulus of the same or nearly the same period as the natural vibration period of the system 2. the
prolongation of sound by reflection; reverberation. 3a. Amplification of a source of speech sounds, esp. of phonation, by
sympathic vibration of the air, eesp. in the cavities of the mouth, nose and pharynx. b. a characteristic quality of a particular voice
speech sound imparted by the distribution of amplitudes among the cavities of the head, chest, and throat. 4a. a larger than
normal vibration produced in response to a stimulus whose frequency is close to the natural frequency of the vibrating system, as
an electrical circuit, in which a value much larger than average is maintained for a given frequency. 5a. a quality of enriched
significance, profundity, or allusiveness; a poem has a resonance beyond its surface meaning. 6. the chemical phenomenon in
which the arrangements of the valance electrons of a molecule changes back and forth between two or more states. (in
percussing for diagnostic purposes) a sound produced when air is present [1485-95]; <MF (Middle French), <L Resonantia,
Echo=Reson (are) to resound + Antia-ance. (Re-a prefix, occurring orig. in loan words from Latin, use to form verbs denoting
action in a backward direction, Action in answer to or intended to undo a situation, or that performance of the new action brings
back an earlier state of affairs. (fibris: fibre string, vocal cord.)

MI-ra gestorum (Miracle)

http://www.littlemountainsmudge.com/artorgonitecuring.htm 31/01/2006 04:08:11

Orgonite and the curing process Page 5

1. an extraordinary occurrence that surpasses all known human powers or natural forces and is ascribed to a divine or
supernatural cause esp. to God. 2. a superb or surpassing example of something; wonder, marvel {1125-75}, ME<L
Miraculum=Mira(Ri) to wonder at. fr (French): sighting, aiming to hold against the light. (gestorum: gesture; movements to
express thought, emotion, any action, communication, etc. intended for effect.)

FA-muli tuorum (Famuls.)

... plural Famuli, 1a. servant/s, or attendant/s, esp. of a scholar or a magician [1830 - 40<L (Latin), servant, of family. (Tourum -
quorum - 1. the number of members of a group required to be present to transact business or carry out an activity legally. usu. a
majority. 2. a particularly chosen group. [1425-75;<L quorum of whom; from a use of the word in commissions written in Latin
specifying a quorum.)

SO-lve polluti (So-lve')

1. to find the answer or explanation for; clear-up; explain; to solve a mystery or puzzle, to work out the answer or solution to (a
mathematical problem.) [1400-50, Late ME<L Solvere to loosen, release dissolve=so-var, after velarl, of se-set-luere to wash;
(see Ablution.) Ablution n. 1. a cleansing with water or other liquid, esp. as a religious ritual. [1350-1400]. (Pollutii-pollute-luted, 1.
to make foul or unclean,)

LA-bii reatum (Labi-al)

1. of pertaining to or resembling a Labium. 2. of pertaining to the lips, 3. (of a speech sound) articulated using one of both lips. 4.
of or designating the surface of a tooth facing the lips. 5. the labial speech sound, esp. consonant, [1585-95]; ML lingual. (reatum
- reaction - 1. a reverse movement or tendency; an action in a reverse direction or manner. 2. a movement toward extreme
political conservatism; 3. a desire to return to an earlier system or order. 3. action in response to some influence, event etc.; 4. a
physiological response to an action or condition. b. a physiological change indicating sensitivity to a foreign matter.) 6. mech. the
instantaneous response of a system to an applied force, manifested as the exertion of a force equal in magnitude, but opposite
in direction, to the applied force [1635-45].

SI (Sancte Johannes)

1. a person of exceptional holiness, formally recognized by the Christian Church esp. by Canonization. 2. a person of great virtue
or benevolence. 3. a founder or patron, as of a movement. 4. a member of any various Christian groups. 5. to acknowledge as a
Saint. Canonize [1150-1200]; ME Seinte. Canon: 1. an ecclesiastical rule or law enacted by a council or other competent
authority and, in the Roman Catholic Church, approved by the Pope. 3. a body of rules, principles, or standards accepted as
axiomatic and universally binding, esp. in a field of study of art. 6. any officially recognized set of sacred books. 10. the part of
the mass between Sanctus and the communion. 11. consistent, note-for-note imitation of one melodic line by another, in which
the second line starts after the first. (axiomatic). 1. pertaining to or of the nature of an axiom; self-evident. 2. a universally
accepted principle or rule. 3. a proposition in logic or mathematics that is assumed without proof for the sake of studying
consequences that follow from it.

Site Map / Products / Info / Ebooks / Contact / Legal / Links

The Orgonite Exchange
Shop For eBooks:
Join | List | Previous | Next | Random | Previous 5 | Next 5 | Skip
Modern Orgone Quarterly magazine Previous | Skip Next
in PDF format.

http://www.eBookAd.com Powered by RingSurf

How to Make an Orgone Field Pulser - Fully illustrated construction manual

http://www.littlemountainsmudge.com/artorgonitecuring.htm 31/01/2006 04:08:11