Scribd
Upload
90 views12 pages

MIRACLE iQUBE USER GUIDE

The document provides step-by-step instructions for using voice code software to record a voice sample, analyze it, save it as an audio file, and play it through an amplifier for sound therapy treatment. It involves logging into the software, recording vowel sounds into a microphone, analyzing and saving the recording as a WAV file, connecting an aux cord from the computer to the amplifier, playing tones to match, and listening to the 24-minute sound therapy session. The instructions conclude with printing the results analysis.

Uploaded by

maggie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
90 views12 pages

MIRACLE iQUBE USER GUIDE

The document provides step-by-step instructions for using voice code software to record a voice sample, analyze it, save it as an audio file, and play it through an amplifier for sound therapy treatment. It involves logging into the software, recording vowel sounds into a microphone, analyzing and saving the recording as a WAV file, connecting an aux cord from the computer to the amplifier, playing tones to match, and listening to the 24-minute sound therapy session. The instructions conclude with printing the results analysis.

Uploaded by

maggie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Voice Code Software

Instructions
Step #1​: Log-in to Software (First time of use enter User: USER NUMBER
– Password)
Step #2​: Double-Click Quantum Sound Icon on the top left of the screen
Step #3​: When Yellow & White “User Name Control” box Pops Up – Click
Yes.
Step #4​: Click, “Sampling” (On the Top Left of Screen)
Step #5​: Click, “Create Vowel Sample”.
Step #6​: Insert Black Microphone into the USB port (on the left of the
computer)
Step #7​: Hold the microphone 1 inch from your mouth & horizontal to the
floor.
NOTE​: Before you start Step #8 be prepared to say Ba Bee Bye Bo
Boo...Hay He Hi Ho Hoo over and over again until recording STOPS.
Step #8​: Click Record & Say Ba Bee Bye Bo Boo...Hay He Hi Ho Hoo into
the microphone until recording STOPS.
Step #9​: Click, “Play” to ensure the Microphone picked up your voice.
Step #10​: Click, “Ok”.
NOTE​: The Program will analyze voice.
Step #11​: Click, “Ok”.
Step #12​: Click, “ ANALYSIS TOOLS”
Step #13​: Click, “Saving”
Step #14​: Click, “Save Audio Program”
Step #15​: Click, “Save as WAV”
Step #16​: Click, “Desktop”
Step #17​: Click on the folder named, “Voice Sample”
Step #18​: In the “File Name” bar, type Name of Person Who just gave a
Voice sample, as well as the date. (Example: Tony 122918)
Voice Code Software
Instructions
NOTE​: DO NOT USE ANY SPECIAL CHARACTERS for Step #18.
Step #19​: Click, “Save”
NOTE​: The Program will create the voice file
Step #20​: Click, “Ok”
Note​: Make sure the Volume on the computer is set to 50-60%. WE
DON’T WANT TO OVERDRIVE THE AMPLIFIER
Step #21​: Plug one side of the black AUX cord into the computer (on the left of
the computer)
Step #22​: Unplug the black MP3 Player from the Miracle.
Step #23​: Plug the other side of the black Aux cord into the Amplifier
NOTE​: Steps #24-27 will only be done the first time the Miracle is used
in this way.
Step #24​: Click, “ Analysis Tools”
Step #25​: Click, “Playing”
Step #26​: Click, “Quick Play”
Step #27​: Click, “iQube Volume”
Note​: Program is doing Audio Buffering”
Step #28​: Click, “ Analysis Tools”
Step #29​: Click, “Playing”
Step #30​: Click, “Quick Play”
Step #31​: Click, “Play”
Step #32​: For the first 3 tones try and match the tone by humming along.
Step #33​: Listen to the tones & hold the Miracle Horizontally in your lap.
Note​: Please don’t talk during this 24-minute sound therapy treatment.
Step #34​: Click, “ ANALYSIS TOOLS”
Step #35​: Click, “View Results”
Note​: A White screen with a blue graph pops up.
Step #36​: Click, “Print Preview” (on the top of the Program’s Screen)

You might also like