BORANG PENGESAHAN PENILAIAN BERTERUSAN

NAMA PENGGUBAL : SERI NIAN BINTI AKMAD

KOD / NAMA KURSUS : DJJ40142 MECHANICAL WORKSHOP PRATICE 4
PROGRAM : DKM SESI : SES 1 2021/2022
JENIS PENILAIAN : PRACTICAL TASK ( SET 1)
CATATAN :
(ditanda oleh Disemak : Disahkan oleh :
penyelaras
kursus/pensyarah
bidang)
_______________________________ _____________________________
Soalan ( ) ( )
Skema Penyelaras Kursus / Pensyarah bidang: Ketua program / Ketua Jabatan
jawapan Tandatangan / nama Tandatangan / nama
Rubrik Tarikh : Tarikh:
Tarikh ;

CLO2 (68)
TOTAL /72
Duration : 2 hours
Complete all the practical task.

1. Refer to the figure below Figure 1, draw the 3D solid model according by using
Inventor Software to the dimension given. ipt

Figure 1 : Drawing 1
2. Refer to the figure below Figure 2, by using Inventor Software do;
a. Draw in isometric view
b. Show the CAM process
c. Generate the G Code.

Figure 2 :
Drawing 2

RUBRIC PRATICAL TASK

DJJ40142 MECHANICAL WORKSHOP PRATICE 4 (CADCAM)
 QUESTION 1

Drawi Unacceptable Developing Accomplished Exemplary

ng Topic (Totally unrelated) (Remotely related) (Somewhat relevant) (Directly relevant) Score
CAD 1 2 3 4
and A.Able to Follow Work shows little Work shows a solid
Understands the basic Work shows a proficiency
CAM Procedure understanding of the understanding of the
technical procedures of in the technical procedures /8
proces Technical skill technical procedures technical procedures of
software program of software program.
s CLO software of software program. software program
2 B. Accurate Some dimensions are Some dimensions are Some dimensions are drawn All dimension are drawn
PLO3 Dimension drawn drawn inappropriately. inappropriately. 1-2 error appropriately. No error
/8
inappropriately. More 3-4 error dimension. dimension.
than 5 error
C. Able to Some features are Some features are 50% Some features are 20% Drawing are drawn 100%
Complete task 60% incompletely incompletely drawn incompletely drawn completely according to
/8
(CAD drawing) drawn according to according to the task according to the task the task
the task
TOTAL /24

QUESTION 2

Unacceptable Developing Accomplished Exemplary

Topic (Totally unrelated) (Remotely related) (Somewhat relevant) (Directly relevant) Score
1 2 3 4
Drawi A. Able to Follow Work shows little Work shows a solid
Understands the basic Work shows a proficiency
ng Procedure understanding of the understanding of the
technical procedures of in the technical procedures /8
CAD Technical skill technical procedures technical procedures of
software program of software program.
and software of software program. software program
CAM B. Accurate Some dimensions are Some dimensions are Some dimensions are drawn All dimension are drawn
proces Dimension drawn drawn inappropriately. inappropriately. 1-2 error appropriately. No error
/8
s CLO inappropriately. More 3-4 error dimension. dimension.
2 than 5 error
PLO3 C. Able to Some features are Some features are 50% Some features are 20% Drawing are drawn 100%
Complete task 60% incompletely incompletely drawn incompletely drawn completely according to
/8
(CAD drawing) drawn according to according to the task according to the task the task
the task
D. Able to apply Some features are Some features are 50% Some features are 20% Drawing are drawn 100%
CAM process 60% incompletely incompletely process incompletely process CAM completely process CAM
/12
using CADCAM process CAM CAM according to the according to the task according to the task
sofware according to the task task
E. Able to generate unacceptable Some features are 50% Some features are 20% ISO codes are 100%
ISO codes (G & N appearance ISO codes incompletely ISO codes incompletely ISO codes completely according to /4
code) according to the task according to the task the task
Solution does not Solution is original and
Solution displays originally.
F. Concept & show any originality, Solution shows a little ingenious. Project reflects
Concepts fulfills the needs /4
originality with no thought thought and originality intelligence, imagination
of the assignment
towards a concept. and unique vision.

Practical task more

G. Submission Practical task on time /4
than 4 hours
Date
TOTAL /48