PTS 3.3 C, class 0.

05
Three phase, stationary test system
Three phase test system PTS 3.3 C

The PTS 3.3 C portable test system consists of an integrated three-phase current and voltage source and a
three-phase electronic reference standard of accuracy class 0.05%. Characteristic features of the
PTS 3.3 C are its wide measuring range, high accuracy and high tolerance to unwanted external influences.
The PTS 3.3 C allows the overall testing of meters and metering installations plus analysis of the local mains
conditions.
Advantages
! Easy verification of meters under precise load conditions, using the built-in, compact, current and voltage
source
! Automatic operation with (programmable) predefined load points without the need of an external PC
! Exchangeable Compact Flash (CF) memory card for storage of measurement results and customer data
! Display of vector diagram and phase sequence for analysis of the supply conditions
! User-friendly system for data input and easy operation of combined source and reference meter
! The system may be used either as a stand-alone reference standard meter, or together with the integrated
power source as acomplete portable test system
Functions
! Independent generation of single or three-phase loading conditions for verification of meters
! Active, reactive and apparent energy measurement for single phase, three phase, 3 wire or 4-wire, systems
with integrated error calculator and pulse output
! Vector diagram, harmonics spectrum, wave form and rotary field display for analysis of the mains
conditions
! Burden measurement of Current Transformer (CT) and Potential Transformer (PT)

Meter test rack with

standard suspension

Meter test rack

with quick connection
device QCD 3I

Meter test rack

with universal socket
adapter QCD Form S
-1-
 Stationary single position test system PTS 3.3 C-1

The stationary system type PTS 3.3 C-1 allows the automatic testing of a single meter, without the need of an
additional personal computer and has the following characteristics:
! Test system PTS 3.3 C-1 consists of a 3 phase reference standard, a 3 phase voltage and current source
plus a single position meter suspension rack
! The suspension rack provides a fast and easy mounting of the meter
! Scanning head support SHC x.x with scanning head SH 2003 or SH 11 for scanning the marks of
mechanical rotating disc meters or the detection of light emitting diodes (LED's) of electronic meters. The
scanning head is adjustable in all 3 axis (left to right, up and down, in and out), as required to align with all
normal configurations of meters

! The PTS 3.3 C is supplied with an integrated software, allowing automatic measuring runs with
(programmable) predefined load points to be carried out
! Optional quick connection devices according to IEC- or ANSI standard, which allow fast suspension and
connection of meters

-2-
Stationary single position test system PTS 3.3 C-2

The static system type PTS 3.3 C-2 allows the testing of a single, complex, multifunction meter fully
automatically and has the following characteristics:
! Test system PTS 3.3 C-2 consists of a 3 phase reference standard, a 3 phase voltage and current source
plus a single position meter suspension rack
! The suspension rack provides a fast and easy mounting of the meter
! Scanning head support SHC x.x with scanning head SH 2003 or SH 11 for scanning the marks of
mechanical rotating disc meters or the detection of light emitting diodes (LED's) of electronic meters. The
scanning head is adjustable in all 3 axis (left to right, up and down, in and out), as required to align with all
normal configurations of meters

! Modular evaluation system SMM 400 for meter error display, inputs for the testing of output contacts or
pulses plus a serial interface for meter communications and programming
®
! Software package CAMCAL for Windows provides a PC controlled fully automatic measuring test system
! Optional quick connection devices according to IEC- or ANSI standard, which allow fast suspension and
connection of meters
-3-
 Software package CAMCAL® for Windows

CAMCAL® for WINDOWS is a comprehensive This defines the data to be selected or programmed
software package designed to fulfil the plus the dispatching commands, adaptable by the
requirements of the modern meter testing customer, makes the fully automatic examination of
environment but also provides the flexibility to high-functional meters and tariff devices possible.
easily incorporate future meter testing
requirements.

CAMCAL® for WINDOWS software allows the

control of both static and portable meter test
equipment, including the recording and
evaluation of meter and measurement data.
The basic version supports the communication
CAMCAL® for WINDOWS software can be used protocol in accordance with that described in the
throughout the meter test environment. IEC 62056-21 Mode C standard. As an additional
Tests can be carried out for simple or highly option the communication protocol is prepared
complex meters in accordance with the customer according to dlms / COSEM.
requirements and national / international test and
calibration regulations (e.g. PTB, IEC, ANSI). Test sequence
The user interface of the basic version shows all A test sequence describes the order and content of
essential information required, therefore making the various test steps in a sequence. For each test
the system easily understandable to operators with step the desired test quantities (current, voltage,
limited technical knowledge. phase angle, frequency, …) are specified.

Advantages of CAMCAL® for Windows

! User-friendly operation
! Database for meters and test sequences
! Fully-automatic test sequences for meter testing
! Transparent evaluation and presentation of
results and statistics
! Suitable for use with various hardware
combinations
! Modular system allows the integration of
customer specific applications
! Operator interface available in several
languages
Meter type description In addition to the respective test method (e.g. error
The meter type description contains the electrical measurement, register tests, …) each checkpoint
and functional definitions of meters under test can be linked with control commands. Control
(connection values, constants, registers, ...). commands display for instance instructions to the
For the tariff device communication, a communi- operator, switching of tariff relays or dispatching of
cation module is assigned to the meter types. commands e.g. to adjust time, …

-4-
Software package CAMCAL® for Windows

Meter testing Furthermore the CAMCAL Report Generator has

the flexibility to add to reports logos, diagrams and
The user allocates to each active measurement fields (e.g. for signatures) etc.
position a meter type and selects a test sequence.
Subsequently the user will comfortably be guided Additional standard functions of the
through the test. The actual status of the test and CAMCAL® for Windows Software
active test point is clearly indicated at all times.
Testing of modern meters requires an adaptable
and flexible software package. Because of its
modular design, CAMCAL® for Windows covers this
requirement.
CAMCAL® for Windows Software meets the
following requirements:
! Modular extensions of semi-automatic and fully
automatic systems are possible without
extensive software adaptations
! Demonstration programmes allow training to be
given before delivery of the test system
! Standardized meter type and test sequence
definitions considerably reduce the need for
extensive training and familiarisation
! Data export modules support data transfer to
It is possible to display simultaneously the actual
other systems
test values and/or results in their own windows
using large, easily visible fonts. ! The operator interface is available in many
different languages
Results ! Password protection is provided for different
After executing an automatic test sequence all user levels
saved results are available for further data ! Import and export function enable the easy
processing, such as creating an individual test transfer of meter types , test sequences, report
report or export to Excel tables. The results can also protocol masks etc. between test systems or
be viewed and evaluated directly using several sort across sites or between manufacturers and
criteria in the database. customers for instance
Optional Software Modules
Tariff device communication / dlms
!
Generation of harmonics
·
Tariff device testing with pulse transmitter
·
Error compensation
·
Generation of ripple control signals
·
Generation of special test signals and wave
·
forms according to IEC 62052-11
IEC 62053-11/-21/-22

The CAMCAL Report Generator, enables the user

to create and define there own protocol masks
(calibration certificates, pass/fail reports, statistical
reports, customer reports etc).

-5-
 Accessories and options

Error Evaluation System

The modular Evaluation System SMM 400 performs error
calculation, testing of emitting contacts and communication to
tariff device units to the meter under test.
Four different versions covering customer´s requirements are
available.
SMM 400+ Error Evaluation System

Scanning Heads
The SH 2003 and SH 11 photoelectric scanning heads are
suitable for scanning the marks of mechanical rotating disc meters
or the detection of light emitting diodes (LED's) of electronic
meters plus simulated pulses on LCD displays (SH 11). Mode of
operation is selectable via a switch

Scanning Head Supports

The SCD 2003, TVU 7.2 und SHC scanning head supports has
been designed for use with the SH 2003 and SH 11 scanning
SHC Scanning head support

Impulse Interface Adapter

The IMP-IF1 interface adapter is suitable for interfacing MTE
reference standards with meters having retransmitting contacts,
open-collector transistor outputs or true S0-outputs to allow full
testing of meters with these types of outputs interfaces

Quick connection devices

Several quick connection devices according to IEC- or ANSI
standard, which allow fast suspension and connection of meters,
EMP 1.3 and QCD quick connection devices are available

Hand Held Terminals

The HT 2010 wireless hand held terminal with an integrated bar
code reader is designed for recording meter specific data at meter
test systems

HT 2010 Hand held terminal

with barcode reader

-6-
The following MTE brochures are available:
Stationary Meter Test Systems: Fixed Rack Systems / Gantry-Trolley System / Customized System
Comparator: K2006
Portable Reference Standards: PRS 400.3 / CALPORT 300
Portable Working Standards: PWS 3.3 / PWS 2.3 PLUS
Portable Standard Meters: CheckMeter 2.3 / CheckMeter 2.1
Portable Power Sources: PPS 400.3 / PPS 3.3 C / CheckSource 2.3
Portable Test Systems: PTS 2.3 C / PTS 3.1 C / PTS 3.3 C / PTS 400.3 / CheckSystem 2.1 / CheckSystem 2.3
Instrument Transformer Tester: PTT 2.1
Transformer Monitoring Systems: HYDROCAL 1001 / HYDROCAL 1003 / HYDROCAL 1005 / HYDROCAL 1008
Software: CAMCAL for Windows / CALSOFT I / II

MTE Meter Test Equipment AG

Dammstrasse 16
P.O. box 4544
CH-6304 Zug, Switzerland
Phone: +41 (41) 724 24 48
Fax: +41 (41) 724 24 25
Internet: www.mte.ch
e-mail: [email protected]

EMH Energie-Messtechnik GmbH

Vor dem Hassel 2
D-21438 Brackel, Germany
Phone: +49 (4185) 58 57 0
Fax: +49 (4185) 58 57 68
Internet: www.emh.de
e-mail: [email protected]

MTE - India Office

115, Navjiwan Vihar
New Delhi - 110017, India
Phone: +91 (11) 2669 10 17
Mobile: +91 (98) 911 12000
Fax: +91 (11) 2669 24 91
e-mail: [email protected]

EMH Energie-Messtechnik (Beijing) Co. Ltd.

Section 305, Building 2, Ke-Ji-Yuan
Nr.1 Shangdi-Si-Jie, Shangdi-Information-Industry-Base
Haidian District
Beijing 100 085
P.R. China
Phone: +86 (10) 629 81 227
Mobile: +86 (139) 0 103 6875
Fax: +86 (10) 629 88 689
e-mail: [email protected]

MTE Meter Test Equipment (UK) Ltd

4 Oval View
Woodley Stockport
Cheshire SK6 1JW, England
Phone: +44 (161) 406 9604
Fax: +44 (161) 406 9605
Internet: www.mte.ch
e-mail: [email protected]

OOO MTE
Pochtovaja Bolshaja str., 26, bld. 1, office 501
105082 Moscow, Russian Federation
Phone: +7 (495) 640 07 25
Internet: www.meter-test.ru
e-mail: [email protected]

MTE Meter Test Equipment AG

Dammstrasse 16 • P.O. box 4544 • 6304 Zug • Switzerland Edition 02.2012
Phone +41 (41) 724 24 48 • Fax +41 (41) 724 24 25 • Internet www.mte.ch Subject to alterations