Scribd
Upload
81 views4 pages

Geometrical Property Modeling: 8.1 Creating A Bulk Volume Property

This document describes geometrical property modeling which uses predefined functions to generate properties like bulk volume, depth, and height above contact. It discusses generating these properties based on upscaled well logs and distributing them numerically throughout 3D grids. Specific steps are provided to create bulk volume and above contact properties by selecting options in the geometrical modeling dialog box. Geometrical properties are important for volume calculations and operations between petrophysical properties.

Uploaded by

Bilal Amjad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views4 pages

Geometrical Property Modeling: 8.1 Creating A Bulk Volume Property

This document describes geometrical property modeling which uses predefined functions to generate properties like bulk volume, depth, and height above contact. It discusses generating these properties based on upscaled well logs and distributing them numerically throughout 3D grids. Specific steps are provided to create bulk volume and above contact properties by selecting options in the geometrical modeling dialog box. Geometrical properties are important for volume calculations and operations between petrophysical properties.

Uploaded by

Bilal Amjad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

8.

Geometrical Property Modeling


Geometrical Modeling is the process where you can use some pre-defined
functions to generate properties (e.g. Bulk Volume, Depth, Height above Contact, and
more). This section will describe general things about the property modeling, such as
using filters and the property player. The distribution of properties in 3D, based on
up-scaled logs, will also be described in general. Geometrical properties are properties
created by using pre-defined system variables such as Cell Height, Bulk Volume,
Depth and Above Contact. Each cell will get a numerical value corresponding to the
selected system variable. These properties can be important in volume calculations
and in mathematical operations between petrophysical properties (e.g. for Sw
transforms). Geometrical Modeling is not restricted to simple geometrical properties
such as bulk volume or volume above a contact level but also covers more complex
property distributions such as: Random, Normal Distribution, Zones, Segments,
Zones/Segments, Faults, Faults/Segments, Seismic, Connected Volumes.

8.1 Creating a Bulk Volume Property

To create a bulk volume property, follow the steps:

• Choose Property Modeling item from Process Diagram,


• Double click on the Geometrical Modeling process,
• A Geometrical Modeling with ‘HAH/3D Grid’ window pops up,
• Select Create new property option, see Fig. 8.1,
• Change the Select Method option to use for generating the new property to
Cell Volume Method,
• From Property template choose the template to use for the new property in this
case use Bulk Volume as property tamplate, as shown Fig. 8.2,
• Press Apply,
• Click OK. See Fig. 8.3

Fig. 8.1: The Geometrical Modeling with ‘HAH/3D Grid’ dialog box

114
Fig. 8.2: The Geometrical Modeling with ‘HAH/3D Grid’ dialog box

Fig. 8.3: Geometrical Modeling displayed in a 3D window along with the Pillar
Gridding and zones while the Bulk volume is shown under the Properties
tab in the Project Explorer

115
8.2 Creating Above Contact Property

To create above contact property, follow the steps:

• In the Geometrical Modeling dialog, reselect Create new property option,


• Choose from Select Method option Above Contact as Method option,
• Choose the Contact Level option,
• Make the value of Constant option = -2010,
• Choose the method to ‘By center of the part of the cell above contact’ as
shown in Fig. 8.4.
• Press Apply and OK. See Fig. 8.5.

Fig. 8.4: Geometrical Modeling displayed in a 3D window while the properties are
displayed

116
Fig. 8.5: Above Contact property generated under the Properties tab in the Project
Explorer in a 3D window

117

You might also like