This document provides technical specifications for the SV 12 stand-on high lift truck made by STILL. Some key specifications include:
- It is an electric stand-on high lift truck with a capacity of 1200kg and load center of 600mm.
- The mast height varies depending on the mast type but the lowered height is 90mm.
- Other dimensions include an overall length of 2080mm and width of 796mm.
- Performance specifications include a top speed of 7-9km/h depending on load, and gradeability of 8-12% when loaded or unloaded.
This document provides technical specifications for the SV 12 stand-on high lift truck made by STILL. Some key specifications include:
- It is an electric stand-on high lift truck with a capacity of 1200kg and load center of 600mm.
- The mast height varies depending on the mast type but the lowered height is 90mm.
- Other dimensions include an overall length of 2080mm and width of 796mm.
- Performance specifications include a top speed of 7-9km/h depending on load, and gradeability of 8-12% when loaded or unloaded.
This document provides technical specifications for the SV 12 stand-on high lift truck made by STILL. Some key specifications include:
- It is an electric stand-on high lift truck with a capacity of 1200kg and load center of 600mm.
- The mast height varies depending on the mast type but the lowered height is 90mm.
- Other dimensions include an overall length of 2080mm and width of 796mm.
- Performance specifications include a top speed of 7-9km/h depending on load, and gradeability of 8-12% when loaded or unloaded.
This document provides technical specifications for the SV 12 stand-on high lift truck made by STILL. Some key specifications include:
- It is an electric stand-on high lift truck with a capacity of 1200kg and load center of 600mm.
- The mast height varies depending on the mast type but the lowered height is 90mm.
- Other dimensions include an overall length of 2080mm and width of 796mm.
- Performance specifications include a top speed of 7-9km/h depending on load, and gradeability of 8-12% when loaded or unloaded.
SV 12 Technical Data Stand-on high lift truck 2 Stand-on high lift pallet truck.
In accordance with VDI guidelines 2198, this specification applies to the standard model only. Alternative tyres, mast types, ancillary equipment, etc. could result in different values.
1.1 Manufacturer STILL
1.2 Manufacturer’s model designation SV 12 Characteristics
1.3 Power supply (electric, diesel, petrol, gas, mains electric) electric 1.4 Type of control (hand, pedestrian, stand-on, rider seated, order picker) electric 1.5 Capacity/load Q kg 1200 1.6 Load centre c mm 600 1.8 Load distance lowered x mm 690 1.9 Wheelbase lowered y mm 1450 2.1 Weight (inc. battery) kg 1400 Weight
2.2 Axle loadings laden drive end/load end kg 980/1650
2.3 Axle loadings unladen drive end/load end kg 940/460 3.1 Tyres (rubber, pneumatic, polyurethane) Polyurethane 3.2 Tyre size drive end mm ø 250 x 100 Wheels | tyres
3.3 Tyre size load end mm 4 x ø 85 x 60
3.4 Support rollers drive end mm 2 x ø 125 x 50 3.5 Wheels, number (x = drive wheel) drive end/load end 1x/3/4 3.6 Track width drive end b10 mm 507 3.7 Track width load end b11 mm 380 4.2 Closed mast height h1 mm see mast table 4.3 Free lift h2 mm see mast table 4.4 Lift height h3 mm see mast table 4.5 Height, mast raised h4 mm see mast table 4.6 Initialhub h5 mm 80 4.9 Height of steering wheel min. max. h14 mm 1345 4.15 Height lowered h13 mm 90 Dimensions
4.19 Overall length l1 mm 2080
4.20 Length to front face of forks l2 mm 930 4.21 Overall width b1 mm 796 4.22 Fork dimensions s/e/l mm 54/184/1150 4.24 Fork carriage width b3 mm 680 4.25 Overall fork width b5 mm 564 4.31 Floor clearance, centre of wheelbase m1 mm 30 4.34 Working aisle width with 800 x 1200 pallet lengthwise Ast mm 2340 4.35 Outer turning radius Wa mm 1630 5.1 Speed laden/unladen km/h 7/9 5.2 Lifting time laden/unladen m/s 0.17/0.20 Performance
5.3 Lowering time laden/unladen m/s 0.37/0.31
5.8 Gradeability laden/unladen % 8/12 5.9 Acceleration time (over 10 m) laden/unladen s 7.3/5.6 5.10 Brakes electric 6.1 Drive motor, rating S2 = 60 min. kW 2.0 Electric Motors
6.2 Hoist motor, rating at S3 = 15 % kW 3.0
6.4 Battery voltage, capacity K5 V/Ah 24/420 6.5 Battery weight ± 5 % (dependimg on manufacturer) kg 370 6.6 Energy consumption according to VDI cycle kWh/h 1.1 8.1 Drive control electronic Other
Stand-on high lift pallet truck designed for a high turnaround - Full electric steering for 180° lock-to-lock movement without of goods in racking, when loading and unloading, as well as for kickback. Steering wheel diameter of only 120 mm horizontal transport of goods up to 1200 kg. and 4½ turns guarantees fast, effortless steering. With compact length and overall width of less than 800 mm, normal - The steer motor is protected against shocks from uneven floors commercial pallets can be handled. The SV is also very flexible when by a safety coupling. used for order picking and as a working/lifting table. - Automatic reduction of speed when driving round corners, thereby ensuring a high level of safety. Driver’s compartment. - The driver’s standing compartment is also fitted with a bucket seat Drive. to allow the driver to be seated if required. - A robust 2.0 kW shunt wound drive motor provides quick - A high level of driving comfort is achieved with the padded interior acceleration and powerful ramp travel. Efficient energy utilisation plus integral storage facilities for working papers and utensils. due to the spur and bevel gear transmission. - Gas-damped non-slip footplate and seat can be adjusted for height by up to 180 mm. Adjustment is smooth and easily achieved by a Hydraulics. simple push of a button. - The hydraulic unit consists of a powerful, high efficiency 3.0 kW - The controls fall easily to hand without changing grip and a clear pump motor actuated via push buttons in the operating panel. layout avoids confusion. Drive direction and travel speed are - Particularly sensitive control is achieved with the proportional controlled by a butterfly switch with integral buttons for hoist and valve technology fitted as standard for the main hoist. lower functions. - Automatic shut-off of the initial lift is achieved by an overload - Footrests on the right of the footwell prevent fatigue during long protection for the hydraulic pump - saving energy and reducing horizontal transport runs. noise. - Standard display gives battery discharge, operating hours and fault code read-outs. Brakes. - Two independent braking systems are fitted. Chassis. - Generator braking activated by releasing the butterfly switch or - Very good all round vision and a clear view onto the fork tips thanks changing drive direction guarantees soft braking and protects the to the new rounded chassis contours. brake linings. During braking the drive unit acts as a generator and - Robust, torsionally rigid steel frame consists of drive section and puts the recovered energy back into the battery. load lifting section. - An electromagnetic brake acts as a parking brake and - A patented hinged section gives ideal access to the electrical emergency brake. components. Ease of servicing reduces maintenance costs. - Starting on gradients is possible without roll-back. - Good weight distribution and reduced point loading due to the - Automatic brake monitoring is achieved by means of a load 4-wheel principle - ideal for upper storey use. sensor, which regulates the braking current to suit the load. - Patented friction aids on the fork tips allow non-slip pallet handling. Battery. - For multi-shift use the battery is changed using the patented battery free lift and a roller track at the side.
