S/M No.

: DSD9255M02

Service Manual
Digital Satellite Receiver
MODEL : DSD-9255M/DSD-9255E
DSD-9256M/DSD-9256E

✔ Caution :
In this Manual, some parts can be changed for improving, their
performance without notice in the parts list. So, if you need the
latest parts information,please refer to PPL(Parts Price List) in
Service Information Center (http://svc.dwe.co.kr).

DAEWOO ELECTRONICS Corp.

http : //svc.dwe.co.kr June. 2004
CONTENTS

GENERAL INFORMATION............................................................................................2
CIRCUIT OPERATION MANUAL .............................................................................................7
FIXING ERRORS ....................................................................................................................28
BOM LIST ...............................................................................................................................33
SCHEMATIC DIAGRAM .........................................................................................................39
PARTS PLACEMENT(ARRANGEMENT) ..............................................................................45

1
GENERAL INFORMATION
Digital Satellite Receiver is easy to use, and allows you to watch digital programs broadcasted via satellite.
This instruction manual will guide you through the initial installation of your receiver.
It also describes how to take full advantage of a wide range of features that are easily accessible.
Read this instruction manual carefully before installing your receiver.

MAIN FEATURES
• Small size and cost-effective
• High quality Digital Video & Audio
• Fully DVB compliant
• User friendly and easy-to use menu system
• Various channel editing function, on Channel Management. (favorite, move, lock, rename, delete and sort)
• User programmable Satellite & Transponder information
• Automatic search for newly added transponder (NIT search)
• Stores up to 4000 channels
• Support software upgrading through Serial port
• Plug-and-play data transfer system (DSR to DSR)
• Individual channel volume saving function
• Timer function
• Automatic reserved channel moving system
• Electronic Program Guide (EPG)
• Teletext function support
• Antenna Positioning Help features
• Support RGB and CVBS video output
• SCPC/MCPC receivable from C/Ku Band
• Multi LNB control by DiSEqC 1.0 and 22 KHz switching
• Motorized system control by DiSEqC 1.2* and USALS.
• 256 color On-Screen-Display
• SatcoDX Download

* DiSEqCTM is a trademark of EUTELSAT.

** USALSTM is a trademark of Stab.

2
 GENERAL INFORMATION

FOR YOUR SAFETY

• Allow clear space of more than 10 cm from the top, back and both sides for sufficient ventilation.
• Do not cover the Digital Satellite Receiver nor place it on a unit that emits heat.
• Use a soft cloth and a mild solution of washing liquid to clean the casing
• Do not connect or modify cables when Digital Satellite Receiver is plugged in.
• Do not remove the cover.
• Do not allow the unit to be exposed to extreme heat, cold or humidity.
• Never allow liquid spray or other materials to come into contact with the inside of the Digital Satellite Receiver.
• This Unit is designed for continuous operation. Switching it off does not disconnect it from the mains(Stand-by). To
disconnect it from the mains, you have to unplug the mains.
• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vaseds,
shall be placed on the apparatus.

UNPACKING
1 x Remote Control Unit (RCU) 1 x RCA Cable
2 x AAA battery (option)

1 x Instruction Manual 1 x DSR

GENERAL OPERATION
Throughout this manual you will notice that the operation of your Digital Satellite Receiver is based on a series of user
friendly On Screen Display menus.
These menus will help you to get the most out of your Digital Satellite Receiver And guide you through installation.
All function can be carried out by using the keys on the remote control.
The Digital Satellite Receiver is easy to use, and adaptable for future upgrades.
Note that new software may change the functionality.
If you have difficulties with the operation of your Digital Satellite Receiver, please refer to the relevant section of this
manual or call your dealer or customer service center for help.

3
GENERAL INFORMATION

Remote Control

Switches between the operational mode

and Stand-by mode of the receiver
Switches between TV and AV mode
Used for various functions on some menu
Displays the menu on the screen
Change channel, or moves to the next
higher or lower item in the menu
Adjusts the volume, or moves to the left
or right item in the menu
Executes the selected item in the menu
screen, or enters the Desired value in any
input mode
Returns to the previous menu or exit
window

Moves up/down a page in the channel list

Executes sort or deletion of satellite

Pauses/Resumes the screen picture

Switches between TV and Radio mode

Switches to the UHF Tuning mode

Recall to the previous channel

Shows information of the current channel
Calls up the EPG (Electronic Program
Guide)

Enter the number in the required menu

item or select a Channel number to watch

Mutes the sound

Change various audio setting

* Master KEY : 1250

4
 GENERAL INFORMATION

FRONT PANEL
To change services up/down
To switch ON the receiver or
to switch standby. To access the programming menus.

To display channel list in viewing mode

or to enter the programming
parameters.
To move the cursor (highlighted) or to change
the volume.

To change services up/down

To switch ON the receiver or

to switch standby. To access the programming menus.

To display channel list in viewing

mode or to enter the programming
parameters.
To move the cursor
(highlighted) or to change
the volume.

REAR PANEL
Connect to TV and VCR using a SCART cable
LNB IN : Connect to
Satellite Antenna
Optic jack (Optional function)

RF Modulator (Optional function) Loopthrough

Serial : Connect to a PC for
100~240V Power Input (Optional function)
S/W upgrade
Connect Video to a TV using RCA jack, Connect Audio L/R to TV or Audio device

5
GENERAL INFORMATION

Product Specification
TRANSMISSION STANDARDS
DVB, MPEG2
LNB/TUNER INPUT
Connector IEC 169-24, Female-type
Input Frequency 950 ~ 2150MHz
Demodulation 2 Msps ~ 35Msps
Code rate QPSK
Max Current 400mA
Supply Voltage 13V/18V
DiSEqC 1.0, 1.2, USALS
SYSTEM RESOURCES
Processor 32bit, 81 MHz
RAM / ROM 8 MB / 2 MB
VIDEO DECODER
Video Standard ISO/IEC 13818-2(MPEG-2)
Profile & Level Main Profile@Main Level
Resolution 720 x 576 pixels for PAL
Aspect ratio 4:3 or 16:9
AUDIO DECODER
Audio format MPEG Layer I and II
Channel Mode Stereo, Mono Mode
Audio Signal Sample Rate 32, 44.1, 48 Ksps
Audio Signal bandwidth 15Hz ~ 20KHz
Bit Resolution 24 bits PCM for the audio sample
POWER SUPPLY
Type SMPS
Voltage & Frequency 100–240V~, 50/60Hz
Power Consumption 25W
REAR PANEL INTERFACES
Video/Audio Output RCA & Scart Jack
Video Input Scart Jack
Optional Video Input/Output : RF modulator
Audio Output : RF modulator & S/PDIF
Data In/Out Serial Jack (RS232)
Satellite in IEC 169-24, Female, F-Type
REMOCON TRANSMITTER
Type R-40D(AAA)
Operating Distance Straight : 8m, Pointing Angle (30°) : 7m
Operating Life Time 200,000 Times Operating Without Load
Batteries 2 x 1.5V AAA

6
 DSD-9230E
DSD-9255M BlockBLOCK
Diagram DIAGRAM
DSD- 9280M Block Diagram
POSITIONER SDRAM
FRONT
Satellite dish & SKEW (64Mbit)
I 2 C BUS
CIRCUIT OPERATION MANUAL

TUNER RCA

7
VIDEO
A/D CPU
(STi5518) TV
6bit AUDIO SCART
DUAL AUDIO D/A Television
LINK IC
QPSK

+3.3V

+ 22 V
+12V
+30V

+ 1 7V
+5V
FEC
1. Block Diagram
FLASH ROM RS-232 SMPS
(16Mbit) PORT
CIRCUIT OPERATION MANUAL

2. Interface
(1) Remote controller Interface
• KEY FUNCTION TABLE
" POWER"
CUSTOM CODE : E8H
DATA CODE : 15 H

KEY NO KEY NAME CUSTOM CODE(H) DATA CODE(H) CUSTOM CODE(B) DATA CODE(B)

K01 1 E8 H 01 H 0001 0111 1000 0000

K02 2 E8 H 02 H 0001 0111 0100 0000

K03 3 E8 H 03 H 0001 0111 1100 0000

K04 4 E8 H 04 H 0001 0111 0010 0000

K05 5 E8 H 05 H 0001 0111 1010 0000

K06 6 E8 H 06 H 0001 0111 0110 0000

K07 7 E8 H 07 H 0001 0111 1110 0000

K08 8 E8 H 08 H 0001 0111 0001 0000

K09 MENU E8 H 22 H 0001 0111 0100 0100

K10 EXIT E8 H 23 H 0001 0111 1100 0100

K11 (VOL ) E8 H 13 H 0001 0111 1100 1000

K12 (VOL ) E8 H 14 H 0001 0111 0010 1000

K13 E8 H 15 H 0001 0111 1010 1000

8
 CIRCUIT OPERATING MANUAL

KEY NO KEY NAME CUSTOM CODE(H) DATA CODE(H) CUSTOM CODE(B) DATA CODE(B)

K14 INFO E8 H 21 H 0001 0111 1000 0100

K15 PR E8 H 17 H 0001 0111 1110 1000

K16 PR E8 H 18 H 0001 0111 0001 1000

K17 0 E8 H 00 H 0001 0111 0000 0000

K18 9 E8 H 09 H 0001 0111 1001 0000

K19 E8 H 12 H 0001 0111 0100 1000

K20 OK E8 H 11 H 0001 0111 1000 1000

K23 EPG E8 H 24 H 0001 0111 0010 0100

K28 (YELLOW) E8 H 29 H 0001 0111 1001 0100

K33 (RED) E8 H 27 H 0001 0111 1110 0100

K34 (GREEN) E8 H 28 H 0001 0111 0001 0100

K35 RCL E8 H 20 H 0001 0111 0000 01 00

K36 (BLUE) E8 H 2A H 0001 0111 0101 0100

K38 TV/RADIO E8 H 0A H 0001 0111 0101 0000

9
CIRCUIT OPERATION MANUAL

3. Peripheral device of STi5518

(1) Structure

Block
Block
movemove
DMA
DMA ST20
ST20
2 MPEG CPU
CPU
2MPEG
DMAs
DMAs

Serial
Serial IEEE 1394 Interrupt
Interrupt
IEEE 1394 controller
controller
SDAV
SDAV
interface
interface

EMI
EMI
Hardware
Hardward
transport
transport
strearn
strearn
demux demux
2
2 SmartCard
SmartCard
interfaces
interfaces(ASC)
2 Kbytes
2Kbytes (ASC)
Instruction
Instruction
cache
cache
MPEG
MPEG
audioaudio
decoder
decoderAC-3 I/F
2K2K Data
Data AC-3 I/F
cache
cacheandand
2K2K SRAM
SRAM
MPEG
MPEG
video
Video
decoder
decoder
OS-Link
OS-Link
2UART
2 UART
2
1IPIO C
PIO
3 PWM
3PWM PAL/NTSC
PAL/NTSC
Encoder
Encoder

Diagnostic
Diagnostic
controller
controller
and and Teletest
Teletest
systems
systems services interface
interface
services

Sit5518 Block Diagram

Feature 5. Sti5518 Block Diagram

STi5518 is a 1 chip including 32bit RISC CPU, A/V Demux, Video Encoder, Multi PIO and Cache RAM for the use o
DVB and DSS Set Top.
Followings are summary of distinctive features of each Block.

Enhanced capability with 32bit VL-RISC CPU Core of 81MHZ clock.

Supporting Bandwidth of 200MB/S using internal 2KB SRAM buffer and 2KB DCACHE.
Video Decoder is attached inside supported by MPEG-2 MP@ML and Letter Box.
MPEG Layer1 and 2 Audio Decoder are stored inside.
Providing interface external AC3 Decoder.
Supporting 2 - 8bit/pixel OSD.
Internally stored Video Encoder for the output of RGB, CVBS and Y/C Video
Enhanced CPU and Decoder capability boosted by 64Mbit SDRAM.
Backing External Surrounding Interface Memories. ( 4 Banks )
Able to use Hardware DMUX, input Serial and to support 32Pid.
Boosting 8 Level INT.
Supporting DMA and other multi PID.

10
 CIRCUIT OPERATION MANUAL

(2) Reset Section.

If the Low signal is read by Sti5518 Reset Pin, the Register value of all Sti5518 will be initialized.
There must be at least of 8 clock (37nsec) of Reset Time.

not_Rst
tRSTLRSTH
Min 8x37nsec

Reset Timing

(3) Clock Section.

STI5518 has two PLL inside. Operative clocks are made by external clock with one unit of 27MHz. The two PLL are as
of ST20 PLL and MPEG PLL.
ST20 PLL produces 81MHz of system clock that is to be used in processor and peripheral equipment.
MPEG PLL produces audio decoder system clock, audio PCM clock, TS Demultiplexer and memory clock of SDRAM.
27MHz clock uses CRYSTAL. Currency control is enabled by PWM OF Sti5518 PWM with the reference of the PCR
value of MPEG to set the exact initiative of MPEG. If this value is not appropriate the colors are not be seen on the
screen, or the screen will display broken features.

(4) PIO Structure.

Sti5518 supports PIO that back up 5 number of Ports (8bit) as of PIO0, PIO1, PIO2, PIO3 and PIO4. Some ports are
able to endow extra functions to PIO for flexible expansion in usage. Following chart shows Alternative Function Pin of
PIO.

Alternative function of PIO pins

Port bit
PIO port 0 PIO port 1 PIO port 2 PIO port 3 PIO port 4

0 ASC0TxD or SSC0 MTSR ASC2TxD

Sc1DataOut or Sc0DataOut

1 ASC0RxD or SSC0 MRST ASC2RxD

Sc1DataIn or Sc0DataIn

2 Not connected SSC0 SCIK Not connected

3 Sc1Clk CaptureIn1 Sc0Clk

4 (Sc1RST) CaptureIn2 CompareOut0

(Sc0RST)

5 (Sc1CmdVcc) ASC1TxD (Sc0CmdVcc) CompareOut1

(IROut)

6 ASC0Dir ASC1RxD Not connected TriggerIn CaptureIn3

7 (Sc1Detect) ASC3TxD CaptureIn0 TriggerOut ASC3RxD

(Sc0Detect)

Chart 2. PIO Alternate Functions.

11
CIRCUIT OPERATION MANUAL

This section only provides summaries of individual function of each Port.

Further discussion will be followed in individual port section.

I 2C_DATA (PIO1_0)
I 2C_CLK (PIO1_2)
Used for the transmission of Serial and control of Tuner, CI-Max, AV Switch and RF Modulator.

ClkPolarity ClkPhase

0 1

Serial clock SCIK

Plns MTSR/MRST

First Last
bit Transmit data bit
Latch data

Shift data

I2CI2Timing
Feature 7. C Timing

PIO NAME I/O Function Remarks

PIO1_0 I2C_Data(SSC0) I/O
PIO1_2 I2C_Clk O
PIO1_3 NOTPGM_EN O L:Flash program enable
H:VCR Scart Input ON
PIO1_4 SLOW_S/W I
L: VCR Scart Input OFF
PIO1_5 RS232_Tx O
PIO1_6 RS232_Rx I
PIO2_7 KI1 I
PIO3_0 COM0 O
PIO3_1 COM1 O
PIO3_2 COM2 O
PIO3_3 COM3 O
PIO3_4 COM4 O
PIO3_5 Seg_clk/K7 O
PIO3_6 TriggerIN I
PIO3_7 TriggerOUT O
PIO4_0 SegA/K0 O
PIO4_1 SegB/K1 O
PIO4_2 SegC/K2 O
PIO4_3 SegD/K3 O
PIO4_4 SegE/K4 O
PIO4_5 SegF/K5 O
PIO4_6 REMOCON_IN I
PIO4_7 SegG/K6 O

Chart 3. PIO Map

12
 CIRCUIT OPERATION MANUAL

NOTPGM_EN (PIO1_3)
Flash ROM Write protect/ Program enable (Low) or Program disable (High)
SLOW_S/W (PIO1_4)
Checking the connection of external features with Vcr scart such as VCR and general power on/off status. Connect
power on(High), Not connect or power off(Low)
RS232_Tx (PIO1_5)
RS232_Rx (PIO1_6)
Rs232 serial data transfer (Used to S/W upgrade, Debugging)
KI1 (PIO2_7)
Key input check. Reading Keys when in the Low status.
COM0 (PIO3_0)
COM1 (PIO3_1)
COM2 (PIO3_2)
COM3 (PIO3_3)
COM4 (PIO3_4)
Selecting 4 Digit of the Display, including clock dots. If it s in Los status, the Digit will be in ON status.
SegA/K0 (PIO4_0)
SegB/K1 (PIO4_1)
SegC/K2 (PIO4_2)
SegD/K3 (PIO4_3)
SegE/K4 (PIO4_4)
SegF/K5 (PIO4_5)
SegG/K6 (PIO4_7)
Seg_clk/K7 (PIO3_5)
Signals the segment of Display and Dot (is ON when in High status) and Key Scan.
Trigger IN (PIO3_6)
Trigger OUT (PIO3_7)
Used when debugging with DCU Tool
REMOCON_IN (PIO4_6)
Recognize the REMOCON signal being sent from IR Sensor.

(5) Memory Interface

Sti5518 can support both On-chip memories that are 2KB SRAM, 2KB SRAM or Data Cache and 2KB Instru
Cache and external expanded memories as of ROM and DRAM. Moreover, SDRAM can be used up to 64Mbits
MPEG memory. From the 64Mbits SDRAM 32Mbits can be used as the buffer of MPEG and the rest of 32Mbits ca
used as Code buffer enabled by Code on SDRAM program.

A. REGION 0
On-Chip memory, Handler, Trap and DMA are allotted from the address 0X80000000 to 0XBFFFFFFF.
B. REGION 1
From the address 0XC0000000 to 0XC0300000 are used as a buffer memory of MPEG.
C. REGION 2
From the address 0X00000000 to 0X3FFFFFFF, they re used for the surrounding area for the internal parts. Indiv
part has 4Kbyte.
D. REGION 3
EMI (Extended Memory) is divided to 4 Banks. Bank 0 is only applicable for the DRAM Interface.

13
CIRCUIT OPERATION MANUAL

Following is the Memory MAP Table.

0x7FFFFFFF
EMI Bank 3 (FLASH)
0x70000000
EMI Bank 2
Reglon 3

0x60000000
EMI Bank 1
0x50000000
EMI Bank 0
0x40000000
Reglon 2

0x20040000
Peripheral configuration registers
0x00000000
Reglon 1

Not available

0xC0300000
Shared SDRAM
0xC0000000

Not available
Reglon 0

0x80001000
2 Kbyte data cache when used as SRAM
0x80000800
2 Kbyte SRAM
MinInt: 0x80000000

Memory Map

The size of EMI Bus is 16bit and also support for the 8bit Bus. The Bank0 of EMI can support DRAM Interface while rest of
Bank as of Bank1, 2 and 3 can only support SRAM, ROM and Peripheral Interface.

Data 0 - 15
16bit data transfer
Adr 1 - 21
When using DRAM, it supports Multiplex mode (Row and Column Address) with the access ability of 32bit.
not_WE0
not_WE1
Signals individual bite Enable Strobe when addressing 2bit word at EMI.

Not_WE0 assert : Data 0 - 7 enable

Not_WE1 assert : Data 8 - 15 enable
not_CE0
not_CE1
not_CE2
not_CE3
EMI Bank0/1/2/3 Chip select strobe

14
 CIRCUIT OPERATION MANUAL

MemWait
Wait signal is produced in external device when accessing SRAM and peripheral devices. Wait signal is maintained as
Order status in the High status motivated by processor clock.
Not_OE
Read Strobe
ReadnotWrite
The ability to Read or Write of processing cycle.

Symbol Parameter Min Max Units Note

tCHAV Referecne Clock high to Address valid -8.0 0.0 ns
tCLSV Reference Clock low to Strobe valid -8.0 3.0 ns
tCHSV Reference Clock high to Strobe Valid -8.0 0.0 ns
tRCA/CH Read Data valid to Reference Clock high 13.0 ns
tCHRDX Read Data hold after Reference Clock high -2.0 ns
tSVRDX Read Data hold after Strobe valid 0.0 ns 1
tCLWOV Reference Clock low to Write Data valid -8.0 7.0 ns 1
tCHWOV Reference Clock high to Write Data valid -8.0 6.0 ns 1
tCHWDZ Reference Clock high to Write data tristate -8.0 6.0 ns
tCHRSV Reference Clock high to remaining Strobes valid -8.0 3.0 ns
tCHPH Reference Clock high to ProcClkOut high -8.0 0.0 ns
tWVCH MemWait valid to Reference Clock high 13.0 ns
tRVCH MemReq valid to Reference Clock high 13.0 ns
tRHWX MemWait hold after ProcClkOut high 0.0 ns 1
tPHRX Memreq hold after ProcClkOut high 0.0 ns 1
tPHEMIZ MemGrant to signals tristate when bus granted TBD ns 1

Chart 4. EMI Timing Value

Access cycle of EMI Bank3 and Bank2 is as following feature. The value of timing chart can be modified by the value of
Configuration Register setting.

15
CIRCUIT OPERATION MANUAL

EMI Interface Timing

16
 (1) Tuner Module

950~2150MHz
4. Front-End Interface

2-WIRE BUS CONTROL

Matched
Direct conversion Filter
Transport
ZIF Tuner
Channel strem O/P

17
Decoder
TDA8260
Matched TDA10086HT
INSIDE LPF Filter

4MHz 2-wire bus

control
4MHz

AGC control
Tuner and QPSK Demodulator are combined into one Module. Following feature shows the Block Diagram.
CIRCUIT OPERATION MANUAL
CIRCUIT OPERATION MANUAL

PIN NO MARK DESCRIPTION CURRENT RIPPLE(MAX)

1 LNB A POWER INPUT OF LNB A

2 NC
3 5V(RF) 5V OF RF-AMP 20mA(TYP.) 20mVp-p
4 AGC AGC MONITORING
5 5V 5V OF 2’nd AMP & ZERO-IF IC 20mA(TYP.) 20mVp-p
6 GND
7 VT TUNING VOLTAGE 30V * 20mVp-p
8 I I SIGNAL MONITORING
9 Q Q SIGNAL MONITORING
10 5V POWER OF AGC AMP 10mA(TYP.) 20mVp-p
11 3.3V POWER OF FEC IC 200mA(MAX.) 20mVp-p
12 F22 22kHz OUTPUT(serial 100ohm)
13 1.8V PLL POWER of FEC IC 120mA(MAX.) 20mVp-p
14 RESET ACTIVE LOW(serial 2Kohm)
15 ERROR OUT ERROR OUTPUR(serial 100ohm)
16 FSTART FSTART(serial 100ohm)
17 VALID DATA VALID(serial 100ohm)
18 BCLK BYTE CLOCK(serial 47ohm)
19-26 D0-D7 DATA OUTPUT(serial 100ohm)
27 DATA I2C DATA(serial 100ohm)
28 CLOCK I2C CLOCK(serial 100ohm)

TS Output is made by the Serial or Parallel function.

The relationship between TS output Data and Control signal is showing in the following diagram. If an error occurs Data is
ignored, and the Data in the Valid area is valid.

Parallel Output Timing

No Error Uncorrectible Packet No Error

BY T E D A T A Data Parity

BYTE CLK

PACKET

STR OUT

ERROR

Parallel Data Output Timing

18
 CIRCUIT OPERATION MANUAL

Serial Output Timing

STA R T

Bi t CLK RS0 = 0
RS0 = 1
Data Parity

PACKET
First bit of the packet

D7 Useful Data Parity

ERROR
1 Packet

Serial Data Output Timing

(2) Related with LNB.

1) LNB power and 22khz Tone Pulse
The power supplied to LNB sends the 22Khz Tone signal that is used in horizontal(18V), vertical(13V) and frequency
Band and Diseqc Command.

Chart 6. LNB Control signals

Function High Low

H/V Horizental(18v) Vertical (13v)
22Khz-ON 22Khz ON 22Khz OFF
LNB-ON LNB ON STD BY
AUX/IRD AUX MODE
IRD MODE
(Loop Through) (External SAT)

22KHZ Tone Spec is

22Khz Tone Pulse

19
CIRCUIT OPERATION MANUAL

2) Loop Through
Supports Loop Through for the Interface function of other Satellite Devices. That means, in other Satellite device, the
control of LNB related voltage and Tone are possible.
If the signal of AUX/IRD Control is in High status, the LNB voltage is provided from LNBP. If it s in Low, the power
can be supported from the external device in the Default states.

5. A/V Interface
(1) Video
Sti5518 has internal Digital Encoder of PAL/NTSC.
Digital Encoder can modify the Digital Video Stream with the ration of 4:2:2 or 4:4:4, OSD, Sub-picture and produce
Analogue Base band PAL/NTSC signal and RGB signal.
Encoder output supports Interlace mode or Non-interlace mode.
There are 6 Pins for the Analogue Video output. (CVBS, S-VHS(Y/C), RGB)
Moreover, it supports Teletext, closed-captions and CGMS.
Following picture shows the signal formats from the individual output.

1) CVBS Timing

Horizontal blanking Interval

Active video
d

0H Full digital line encoding

(720 pixels - 1440 T)

Analog line encoding

b a
(710 pixels - 1420 T)
c1 (bit aline = 0)
c2 (bit aline = 1)

NTSC-M PAL-BDGHI PAL-N PAL-M

a 5.38 s (even lines) 5.54 s (A-type) 5.54 s (A-type) 5.73 s (A-type)
5.52 s (odd lines) 5.66 s (B-type) 5.66 s (B-type) 5.87 s (B-type)
b 1.56 s 1.28 s 1.28 s 1.28 s
c1 8.8 s 9.3 s 9.3 s 9.3 s
c2 9.3 s 10.1 s 10.1 s 10.1 s
d 9 cycles of 3.58MHz 10 cycles of 9 cycles of 9 cycles of
4.43MHz 3.58MHz 3.58MHz

CVBS Timing

2) Comparison of RGB signals.

G B R

100

RGB Signal Pulse

20
 CIRCUIT OPERATION MANUAL

3) Color Bar CVBS, Y, C, signals

Magenta
Yellow

Green
White

Block
Cyan
MA V

Blue
Red
32.88 1.233
400
28.88 1.000 WHITE LEVEL
388
316
284
238
Color Burst
204
(10 Cycles)
12.01 0.450 152
8.00 0.300 BLACK/BLANK
LEVEL
4.00 0.150

1.80 0.068
SYNC
IFVFI
Magenta
Yellow

Green
White

Block
Cyan

Blue
Red
MA V
400
26.68 1.000 WHITE LEVEL
388

316
284
236
Maintain 204

300mV 152

9.00 0.800 BLACK/BLANK LEVEL

0.00 0.000 SYNC LEVEL

Magenta

MA V
Yellow

Green
White

Block
Cyan

Blue
Red

28.88 1.000
Maintain
300mV
21.03 0.791
BLANCK
17.07 0.640 LEVEL
13.07 0.490
Color Burs1
(10 Cycles)

5.27 0.196

CVBS, Y and C Waveform of Color Bar signals

21
CIRCUIT OPERATION MANUAL

1-4) Video Output

There are 2 Video Output Port in the DSD-9255MP products. (TV Scart, RCA JACK)
The output of R,G and B signals are sent to TV Scart through Video Buffer and LPF (Low Pass Filter) originated from
the STI5518 output.
There are two control signals as of Fast Blanking and Slow Blanking in TV SCART.
Chart 9 shows the usage of control signals.

- Can select either TV/AV mode or 16:9/4:3 mode.

Slow Blanking TV/AV Selecting TV/AV mode of TV SET.
(Pin8) TV mode : <1.5V, AV mode : 11 ~ 13V
16:9/4:3 Selectint Wide Mode.
4:3 mode = 11 ~ 13V, 16:9 mode= 5 ~ 6.5V
Select video input signal of TV.
Fast Blanking RGB : 1~ 3V
CVBS : 0 ~ 0.4V

Chart 9. Slow/Fast Blanking Function

Current TV Scart Pin that are used in the DSD-9255M is as following.

FUNCTION PIN NO.

AUDIO_OUT_R 1
AUDIO_OUT_L 3
VIDEO_OUT 19
SLOW_SWITCH 8
FAST_BLANKING 16
R 15
G 11
B 7
VIDEO_GND 5,9,13,14,17,18,21
AUDIO_GND 4

Chart 70. TV SCART Connector Pin

Following Table shows the Scart Connector

20 2

21
19 1

(SCART CONNENTOR)

22
 CIRCUIT OPERATION MANUAL

Pin Name Description Singnal Level Impedance

1 AOR Audio Out Right 0.5 Vrms <1k ohm
2 AIR Audio In Right 0.5 Vrms >10k ohm
3 AOL Audio Out Left + Mono 0.5 Vrms <1k ohm
4 AGND Audio Ground
5 B GND RGB Blue Ground
6 AIL TV/AV(4:3, 16:9) Mode Select 0.5 Vrms >10k ohm
7 B RGB Green Ground 0.7 V 75 ohm
8 SWITCH Data 2 : Clock pulse Out(Unavailable)
9 G GND RGB Blue In
10 CLKOUT TV/AV(4:3, 16:9) Mode select
11 G RGB Green in 0.7V 75 ohm
12 DATA Data 1: Data Out(Unavailable)
13 R GND RGB Red Ground
14 DATAGND Data Ground
15 R RGB Red In/Chrominance 0.7V(Chrom.:0.3V burst) 75 ohm
16 BLNK Blanking Singnal 1-3V=RGB, 0-0.4V=Composite 75 ohm
17 VGND Composite Video Ground
18 BLNKGND Blanking Signal Ground
19 VOUT Composite Video Out 1V 75 ohm
20 VIN Composite Video In/Luminance 1V 75 ohm
21 SHIELD Ground/Shield(Chassis)

Chart 81. SCART PINSPEC.

(2) Audio
1) PCM Audio
Audio related output of the Sti5518 is made in the form of PCM format and AC3 Interface format.
DSD-9255M uses the serial data of PCM format. PCM Data output format is in Standard format and I2S Compatible
PCM format.
Followings are the interface signals of PCM format.
PCMDATA (Sti5518 Pin52) : PCM Serial Data Output
SCLK (Sti5518 Pin51) : PCM Clock Output
LRCLK (Sti5518 Pin56) : Left/Right Channel select
PCMCLK (Sti5518 Pin55) : PCM Clock Input(18.432Mhz)

Data of PCM format is modified to Analogue signals at the external Audio DAC. The output information is sent to
external output port through Output magnifying equipment and AV Switch.
DSD-9255M can use two Audio DAC systems. (PCM1754/Texas Instruments)
Following diagram shows Timing Diagram with Audio DAC and TI PCM1754 Block.

23
CIRCUIT OPERATION MANUAL

1/fS

LRCK L-channel R-channel

BCK
(= 48fS or64fS )

DATA 1 2 3 N-2 N-1 N 1 2 3 N-2 N-1 N 1 2

MS B LSB MS B LSB

PCM Timing

Analogue Audio Signals that are modified at Audio DAC are amplified by three times after going through Low Pass
Filter. The output is made after the amplification through AV Switch or Buffer.

2) Digital Audio(SPDIF Format)

Use PCM1754/Texas Instruments which are IC of the Digital Audio Encoding system in SPDIF format. The signals are entered
from the PCM Format (I2S Format).
The Digital Signals that were encoded in SPDIF go through driver circuit, then the output is placed in the RCA unit.
This output will be connected with Digital Audio Devices.

24
 CIRCUIT OPERATION MANUAL

6. Software Operating Steps

(1) Operating Steps.
A. Initialize multi-purpose PIO port
B. STI5518 chip version detection
C. Set DMT default multi-purpose PIO port
D. Initialize the OS20 software scheduler
E. Initialize the interrupt subsystem
F. Flash vendor check
G.Booting mode check(UART Debugging mode / Factory Test Mode / Normal Mode)
H. develop_init
I. i2c_init
J. pti_init
K. pwm_init
L. pcr_init
M.tuner_init
N. uart_init
O.mpeg_init
P. gprim_init
Q.teletextInit
R. run_smallwin
S. front_init
T. AudioPesManagerInit

(2) Normal States after the Power On

1) BOOT is displayed on the Front Panel.
Boot Loader is activated having following functions.
System Booting
Flash Memory & Program Check
System Upgrade by another DSR or PC
Factory Default Data read/write by PC

2) ---- sign is displayed in Front Panel.

Check whether the User Data is being loaded to Main RAM from the Flash ROM. Check the validity of Data.

(3) UART Console Message

Following Booting Message will be seen after executing UART Emulator Program when connecting SERIAL Port with
PC.

1) Development environment display

************************************************************
STi5518 DVB Reference Firmware Version 6.0
Code Exe = 0x4d4f52 (ROM)
************************************************************

Software compiled on Apr 04 2000 at 01:33:58

With DCU release 1.6.2 (50600)
ANSI C compiler Version 5.06.00 (04:41:24 Oct 15 1998) (W95/NT-PC)
OS20 kernel 2.05.03 (12:07:34 Oct 19 1998)

Device_id = 2d4c9041 (STi5518) (STi5518 version E, F or G detected)

[VID_REV=D1] [AUD_REV=D3]
[DENC_CHIPID=53] [DENC_REVID=00]

--- General configuration ---

Instruction cache Enabled
[TESTTOOL_PRESENT fitted]
[EVAL5518 NOT fitted]
[CODE_ON_SDRAM fitted]

25
CIRCUIT OPERATION MANUAL

--- DEVELOP driver configuration ---

[UARTIO fitted]
[UNHOSTED NOT fitted]
[STREPORT fitted]

--- MPEG driver configuration ---

[B_ON_THE_FLY fitted]
[ENABLE_AVSYNC fitted]
[DONT_BLOW_UP_HALF_SIZE_PICTURES NOT fitted]
[BUILT_FOR_16MBIT fitted]
[DECODE_ELEMENTARY_STREAM NOT fitted]
[SIF_UPSAMPLING_WORKAROUND NOT fitted]

2) I2C driver initialized message

I2C driver initialized

3) API Information & Clock Initial

CFG_DRC = 0x2b
PTI driver library v3.0
Link I/F cut 2.x initialized for DVB
Setting up the link i/f interrupt
Clock recovery/PWM init
[PWM_REBASING FITTED]
[PWM_CONTROL_LARGER_VALUE_FASTER_CLOCK FITTED]
[PWM_INITIAL_VALUE: 0x83]
PCR init

4) Tuner Initial
TUNER Module Initialization
Creating TUNER module semaphores ...

module_type = 148 Successfully Installed TUNER module

5) MPEG SDRAM configuration

MPEG SDRAM configuration :
Video Bit Buffer : Size= 400 Kbytes From 0xc0000000 to 0xc0063fff
Audio Bit Buffer : Size= 16 Kbytes From 0xc0064000 to 0xc0067fff
OSD Buffer : Size= 400 Kbytes From 0xc0068000 to 0xc00cbfff
Frame Buffer A : Size= 608 Kbytes From 0xc00cc000 to 0xc0163fff
Frame Buffer B : Size= 608 Kbytes From 0xc0164000 to 0xc01fbfff

First free address = 0xc01fc000

Total SDRAM used = 2032 Kbytes
SDRAM not used by MPEG = 16 Kbytes

6) MPEG Process & Video Encoder Process Start

STi5518 Encoder configured in PAL BGDHI
Mpeg audio/video synchro process started
Mpeg live reset process started
Setting up the mpeg video interrupt
5518 initialized to parse PES streams
Setting up the mpeg audio interrupt

26
 CIRCUIT OPERATION MANUAL

7) Teletext Driver & Process Start

Teletext driver library v1.0 - Version of Apr 04 2000 at 01:34:03
Creating Teletext VBI task (priority=9)
The teletext_data_transfer task is running
Creating Teletext STB Page Filter task (priority=9)
The ttx_stb_page_filter task is running
Creating Teletext Handler task (priority=9)
teletext_handler task is running

8) User Data Loading & Save

load gpos.....read crc = 5da2a839 : write crc = 5da2a839
***
........LOAD POSt -----> OK! ; serivce_num = 0
*****
........LOAD POSt parsing process start ************
........LOAD POSt parsing process start ************
........LOAD POSt parsing process start ************
........LOAD POSt parsing process start ************
........LOAD POSt parsing process start ************
......Last Channel didn t save before !!!!
......Last Channel didn t save before !!!!

9) API Kernel Process Start

SMALLWIN smallwin_scheduler PROCESS STARTED ...........
smallwin_scheduler start.......... ok

10) Initializing AUDIO PES Manager

469 audiopes.c> Initialising AUDIO PES Manager ...
510 audiopes.c> AUDIO PES Manager is created successfuly ...

11) OK or Fail Message

--[No errors during initialization !!!]--

-----------------------------------------
---------- OOO OO O O OO OOO ----------
---------- OO OO O OO O O OOO ----------
---------- OO OO OO O O ----------
---------- OO OO OO O O ----------
---------- OO OO OOOO ----------
---------- OO OO OO OO ----------
---------- OO OO OO OO ----------
---------- OO OO OO OO ----------
---------- OOO OO OO OO OOOO ----------
-----------------------------------------
-----------------------------------------

27
 FIXING ERRORS

1. BOOTING LED ERROR

(1) No response of Display Boot signal.

Start

YES

No Display LED signal.

YES
NO
Power on? Modify Power status.

YES
NO
Is Reset IC working? Check Reset Circuit.

YES
NO
Check 27Mhz Crystal and
Oscillating 27Mhz clock? other peripheral circuit.

YES

NO
A Flash Cs output status? Check CPU power. NO
(STi5518 Pin27-High) Eliminate the problems.
YES Check ROM Booting Mode.
Check Wait Signal.
(STi5518 Pin131-Low)

BUS Interface port Check short/open YES

satus.(Resistor, Flash ROM, SDRAM,
Bufffer) Replacing STI5518.
Check all BUS and control signal.
Check MEMCLK
(SDRAM PIN38-121MHz)
NO
Persecute Short or Open

YES

Flash ROM Check-Power OK? NO Eliminate problems related with power.

Programmed? Programming

YES

NO
Replacing Flash ROM Replacing Sti5518

28
 FIXING ERRORS

2. Poor quality screen

2. Poor quality screen
(1) Locking Error
NO NO
Check the power status of 30V, 3V3 voltage OK? Replace the SMPS
tuner(30V,
VCC_TUNER,3V3)
NO
YES Tr(Q808)OK?(VCC_TUNER) Replace Q808.

YES

NO LNBP output OK?(IC27 NO

Check the power of LNBP Input control?
LNB(13V/18V) PIN3)
NO YES
Eliminate problem causing factors.
YES

Replace LNBP

NO
12C Line Check? Reset Check?

YES

NO
Check Locking Voltage(1-16V)
Tuner PIN 13 near TP
YES NO
Check Reset Eliminate problems.
Circuit
NO
YES
Replace Tuner
YES

Check IC related parts.

Check and eliminate
Replace Tuner
problem parts.
B

29
 FIXING ERRORS

(2)Disabled screen after Locking

Check the 3.3V power of NO
Tuner(Ripple, Voltage) Fix the problem

YES

Check Error Pin.(Whether YES

Replace Tuner
the output is in High Status.)

NO

Tuner interface Signal

check? NO
(TS_Data, F_packet_clk,
F_strt, F_B_clk)

YES Fix the problem.

NO
Pts Crystal Check?

YES

NO
Fix the problem.

YES

Stream Input Signal check?

(Link_Data, Link_B_clk,
Link_val, F_error)

YES

TS Output Siggnal Check?

(F_Data, F_val, Error,
Link_val)
NO
Replace PtS Asic IC
YES

Replace CPU

30
FIXING ERRORS

3. Errors In Audio and Video

3. Errors in Audio and Video
(1) AUDIO ERROR

Eliminate problems
Check the power status of
NO
Audio DAC

YES

NO YES
Check the STi 5518 Replace STi5518
Check the Input Signal PCM
Data, SCLK, LRCLK, NO Check the Interface OF YES
PCMCLK) Replace Audio DAC
Audio AMP IC.

Eliminate problems
NO

YES NO
Audio AMP Check Replace Audio AMP

YES
NO
Audio Buffer Check Eliminate problems

YES

Confirm the connection status of Port

31
 FIXING ERRORS

(2) VIDEO ERROR

LED Booting OK

YES

YES NO
STi5518 CVBS out check Video buffer, Low Pass Confirm and execute the
Pin34 Filter Check fixing process

YES

Confirm the connection status of tracking port and execute

the fixing process

Check the power status of NO YES

Check Related Circuits and execute the
Sit5518 Video fixing process
(Pin 23, Pin30) Replace STi5518

YES
YES
NO Verify the resistance value and perform
necessary operation
I/V Ref. Check(STi5518-Pin28,
29, Pin35, 36)
NO YES
Confirm Video Buffer and perform
YES necessary operation.

Bad quality of RGB(TV Start RGB mode)

YES

STi5518 RGB Output Pin Check.

(Pin 25,26,27)

YES

Replace STi5518

32
 BOM LIST

✐ CAUTION : In this Service Manual, some parts can be changed for improving their
performance without notice in the parts list. So, if you need the latest parts
information, please refer to PPL(Parts Price List)in Service information
Center(http://svc.dwe.co.kr)

LOC PARTS_CODE PARTS_NAME PARTS_DESCR REMARK LOC PARTS_CODE PARTS_NAME PARTS_DESCR REMARK
01 PVACPSM085 ACCESSORY AS DSD-9251EAV C201 HCBK392KBA C CHIP CERA 50V X7R 3900PF K 1608
DP01 97P95600D0 MANUAL OWNERS EC MODEL C202 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608
DP02 97P0424100 COVER ACCESSORY LD-PE T0.05 C203 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608
01A PVA2PSM085 ACCESSORY 2 AS DSD-9251EAV C204 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608
DP11 97P880P815 CABLE RCA 3P-3P WEL-WHT-RED 1.5M C205 HCBK222KBA C CHIP CERA 50V X7R 2200PF K 1608
DP12 486A716202 BATTERY AAA 1.5V(SUPERGARD) C206 HCBK222KBA C CHIP CERA 50V X7R 2200PF K 1608
DP13 97P0481200 COVER ACCESSORY-A LD-PE T0.1 C207 HCBK222KBA C CHIP CERA 50V X7R 2200PF K 1608
02 PVPKCPM086 PACKING AS DSD-9255M C208 HCBK222KBA C CHIP CERA 50V X7R 2200PF K 1608
CP01 97P4933700 PAD L/R EPS C209 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608
CP02 97P4809200 POLY BAG FOR SET 800X650XTO.5 PE-FOAM C210 HCQK271JBA C CHIP CERA 50V CH 270PF J 1608
CP03 97P5058940 BOX GIFT SW-4(439X107X327) C211 HCQK271JBA C CHIP CERA 50V CH 270PF J 1608
03 PVMCASM086 CHASSIS MAIN AS DSD-9255M C212 HCQK151JBA C CHIP CERA 50V CH 150PF J 1608
A001 97P0485100 COVER BOTTOM SECC T0.8 C213 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608
A0011 97P4220200 CUSHION LEG EVA T4.0 C214 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608
A002 97P9340004 LABEL SPEC PE FILM 91¡¿61 C215 HCBK222KBA C CHIP CERA 50V X7R 2200PF K 1608
A040 4952101600 COVER TOP SECC T0.6+PCM C216 HCBK222KBA C CHIP CERA 50V X7R 2200PF K 1608
A041 7173300812 SCREW TAPTITE TT2 BIN 3X8 BK C220 HCBK392KBA C CHIP CERA 50V X7R 3900PF K 1608
A060 97P0485200 COVER BACK SECC T0.6 C221 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608
A061 7173300812 SCREW TAPTITE TT2 BIN 3X8 BK C222 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608
D100 97P1R9ABA0 REMOCON HANDSET AS VR-F9ABA0 BK080A(AAA) C223 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608
M01 97PP344000 PANEL FRONT AS DSD-9255M C228 HCBK392KBA C CHIP CERA 50V X7R 3900PF K 1608
Z03A 7174301011 SCREW TAPPTITE TT2 RND 3X10 MFZN C229 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608
M01A 7174300811 SCREW TAPPTITE TT2 RND 3X8 MFZN C230 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608
P602A 97P88FA905 CABLE FFC 1.0 K 9P 50MM C231 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608
Z001 PVMPMSM086 PCB MAIN MANUAL AS DSD-9255M C232 HCBK332KBA C CHIP CERA 50V X7R 3300PF K 1608
AM101 2193100801 SOLDER WIRE SN:PB=63:37 3PI(NO FLUX) C233 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608
AM102 2193100801 SOLDER WIRE SN:PB=63:37 3PI(NO FLUX) C234 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608
AM103 2291050305 FLUX LIQUID RF-800KN C235 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608
AM104 2291050306 FLUX THINNER RF-800ADD C236 HCBK332KBA C CHIP CERA 50V X7R 3300PF K 1608
AM105 2291140501 WAX COVER C237 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608
IC101 1KA317 IC REGULATOR KA317 C238 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608
IC10A 97Q4400100 RADIATOR TR AL EX C239 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608
IC10B 7174300811 SCREW TAPPTITE TT2 RND 3X8 MFZN C240 HCBK332KBA C CHIP CERA 50V X7R 3300PF K 1608
JK201 4959100480 JACK SCART DSAM-9906 C241 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608
JK202 4950700002 JACK PIN BOARD DPAM-0043/3P C242 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608
JK301 4859203001 CONN D-SUB YDC-003B C243 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608
P301 97P62Y17AF CONN WAFER YW025-15 ST PLUG 2.5MM C301 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608
RF101 97P7621700 DIGITAL TUNER SS DT-S1(SATELLITE) C302 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608
Z0011 PVMPJ1M086 MAIN CHIP MOUNT A AS DSD-9255M C303 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608
C101 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 C304 HCQK100JBA C CHIP CERA 50V CH 10PF J 1608
C102 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 C305 HCQK100JBA C CHIP CERA 50V CH 10PF J 1608
C103 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 C306 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608
C104 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 C307 HCFK105ZBA C CHIP CERA 50V Y5V 1MF Z 1608
C106 HCBK103KBA C CHIP CERA 50V X7R 0.01MF K 1608 C308 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608
C107 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 C310 HCBK103KBA C CHIP CERA 50V X7R 0.01MF K 1608
C108 HCBK222KBA C CHIP CERA 50V X7R 2200PF K 1608 C311 HCQK270JBA C CHIP CERA 50V CH 27PF J 1608
C110 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 C312 HCQK270JBA C CHIP CERA 50V CH 27PF J 1608

33
 BOM LIST

LOC PARTS_CODE PARTS_NAME PARTS_DESCR REMARK LOC PARTS_CODE PARTS_NAME PARTS_DESCR REMARK
C314 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 L206 HLX1210001 BEAD CHIP TB201209Z121
C359 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 L207 HLX1210001 BEAD CHIP TB201209Z121
C360 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 L208 HLX1210001 BEAD CHIP TB201209Z121
C361 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 L209 HLX1210001 BEAD CHIP TB201209Z121
C362 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 L210 HLX1210001 BEAD CHIP TB201209Z121
C401 HCBK103KBA C CHIP CERA 50V X7R 0.01MF K 1608 L211 HLX1210001 BEAD CHIP TB201209Z121
C404 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 L301 HLX1210001 BEAD CHIP TB201209Z121
C405 HCBK103KBA C CHIP CERA 50V X7R 0.01MF K 1608 L302 HLX1210001 BEAD CHIP TB201209Z121
C406 HCBK103KBA C CHIP CERA 50V X7R 0.01MF K 1608 L401 HLX1210001 BEAD CHIP TB201209Z121
C409 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 L402 HLX1210001 BEAD CHIP TB201209Z121
C410 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 L403 HLX1210001 BEAD CHIP TB201209Z121
C411 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 L404 HLX1210001 BEAD CHIP TB201209Z121
C412 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 L601 HLX1210001 BEAD CHIP TB201209Z121
C413 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 L602 HLX1210001 BEAD CHIP TB201209Z121
C414 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 L603 HLX1210001 BEAD CHIP TB201209Z121
C415 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 P601 97P62K06E9 CONN FFC SMD SCB-2209-M-2 SMD ST 1.0
C416 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 P901 97P62K06EM CONN FFC SMD SCB-2221-M-2 SMD ST1.0
C417 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q101 TZTC3205Y- TR KTC3205Y (2236Y)
C418 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q102 T2SC5343SF TR CHIP 2SC5343SFG-DAG
C419 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q103 T2SC5343SF TR CHIP 2SC5343SFG-DAG
C420 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q104 T2SC5343SF TR CHIP 2SC5343SFG-DAG
C421 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q105 T2SC5343SF TR CHIP 2SC5343SFG-DAG
C422 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q106 TKTN2907 TR KTN2907
C423 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q201 TKTN2907 TR KTN2907
C424 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q202 T2SC5343SF TR CHIP 2SC5343SFG-DAG
C425 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q203 T2SC5343SF TR CHIP 2SC5343SFG-DAG
C426 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q204 T2SC5343SF TR CHIP 2SC5343SFG-DAG
C427 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q205 T2SA1980SF TR CHIP 2SA1980SFG-CAG
C428 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q206 TZRC104S TR CHIP KRC104S
C429 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q207 TZRC104S TR CHIP KRC104S
C430 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q208 T2SC5343SF TR CHIP 2SC5343SFG-DAG
C431 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q209 TKTN2907 TR KTN2907
C432 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q210 TZRC104S TR CHIP KRC104S
C601 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q211 T2SC5343SF TR CHIP 2SC5343SFG-DAG
C602 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q212 T2SC5343SF TR CHIP 2SC5343SFG-DAG
C603 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q214 TKTN2907 TR KTN2907
C604 HCBK392KBA C CHIP CERA 50V X7R 3900PF K 1608 Q215 T2SC5343SF TR CHIP 2SC5343SFG-DAG
C605 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608 Q216 TKTN2907 TR KTN2907
C606 HCQK391JBA C CHIP CERA 50V CH 390PF J 1608 Q217 TKTN2907 TR KTN2907
C607 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q218 TKTN2907 TR KTN2907
C914 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 Q219 TKTN2907 TR KTN2907
D201 DRLS4148-B DIODE CHIP RLS4148TE-11 3415 Q601 T2SA1980SF TR CHIP 2SA1980SFG-CAG
IC201 1HEF4053BD IC CHIP HEF4053B Q602 T2SC5343SF TR CHIP 2SC5343SFG-DAG
IC301 1PCM1754DD IC CHIP DAC PCM1754DBQ 16PIN SSOP REEL Q603 TKTN2907 TR KTN2907
IC302 1K1A358F-C IC CHIP OP AMP KIA358F DUAL OP AMP FLP-8 Q901 TZRC104S TR CHIP KRC104S
IC303 1SN74HCU0D IC CHIP HEX INVERTER SN74HCU04DR(SO14) 14 PIN Q902 TZRC104S TR CHIP KRC104S
IC304 1FM809TS3B IC CHIP RESET FM809TS3 Q903 TZRC104S TR CHIP KRC104S
IC305 1ST232CD-Q IC CHIP DRIVE ST232CD Q904 TZRC104S TR CHIP KRC104S
IC401 1ST15518BQ IC CHIP DECODER STI5518BVC 208PIN PQFP Q905 TZRC104S TR CHIP KRC104S
IC402 1160ATTC7Q IC CHIP FLASH ROM MX29LV160ATTC-70 48PIN TSOP Q906 TZRC104S TR CHIP KRC104S
IC403 1T436416AT IC CHIP SDRAM T436416A-7S Q907 TZRC104S TR CHIP KRC104S
L201 HLX1210001 BEAD CHIP TB201209Z121 Q908 TZRC104S TR CHIP KRC104S
L202 HLX1210001 BEAD CHIP TB201209Z121 Q909 T2SA1980SF TR CHIP 2SA1980SFG-CAG
L203 HLX1210001 BEAD CHIP TB201209Z121 Q910 T2SA1980SF TR CHIP 2SA1980SFG-CAG
L204 HLX1210001 BEAD CHIP TB201209Z121 Q911 T2SA1980SF TR CHIP 2SA1980SFG-CAG

34
 BOM LIST

LOC PARTS_CODE PARTS_NAME PARTS_DESCR REMARK LOC PARTS_CODE PARTS_NAME PARTS_DESCR REMARK
Q912 T2SA1980SF TR CHIP 2SA1980SFG-CAG R231 HRFS750JBA R CHIP 1/16 75 OHM J 1608
Q913 T2SA1980SF TR CHIP 2SA1980SFG-CAG R232 HRFS103JBA R CHIP 1/16 10K OHM J 1608
R101 HRFS101JBA R CHIP 1/16 100 OHM J 1608 R233 HRFS821JBA R CHIP 1/16 820 OHM J 1608
R102 HRFS101JBA R CHIP 1/16 100 OHM J 1608 R234 HRFS222JBA R CHIP 1/16 2.2K OHM J 1608
R103 HRFS560JBA R CHIP 1/16 56 OHM J 1608 R235 HRFS750JBA R CHIP 1/16 75 OHM J 1608
R104 HRFS101JBA R CHIP 1/16 100 OHM J 1608 R236 HRFS750JBA R CHIP 1/16 75 OHM J 1608
R105 HRFS101JBA R CHIP 1/16 100 OHM J 1608 R238 HRFS393JBA R CHIP 1/16 39K OHM J 1608
R106 HRFS560JBA R CHIP 1/16 56 OHM J 1608 R239 HRFS102JBA R CHIP 1/16 1K OHM J 1608
R107 HRFS560JBA R CHIP 1/16 56 OHM J 1608 R240 HRFS104JBA R CHIP 1/16 100K OHM J 1608
R110 HRFS223JBA R CHIP 1/16 22K OHM J 1608 R241 HRFS104JBA R CHIP 1/16 100K OHM J 1608
R111 HRFS241JBA R CHIP 1/16 240 OHM J 1608 R242 HRFS104JBA R CHIP 1/16 100K OHM J 1608
R112 HRFS332JBA R CHIP 1/16 3.3K OHM J 1608 R243 HRFS000-BA R CHIP 1/16 0 OHM 1608
R113 HRFS123JBA R CHIP 1/16 12K OHM J 1608 R244 HRFS223JBA R CHIP 1/16 22K OHM J 1608
R114 HRFS100JBA R CHIP 1/16W 10 OHM J 1608 R245 HRFS393JBA R CHIP 1/16 39K OHM J 1608
R115 HRFS223JBA R CHIP 1/16 22K OHM J 1608 R246 HRFS102JBA R CHIP 1/16 1K OHM J 1608
R116 HRFS223JBA R CHIP 1/16 22K OHM J 1608 R247 HRFS104JBA R CHIP 1/16 100K OHM J 1608
R117 HRFS201JBA R CHIP 1/16 200 OHM J 1608 R248 HRFS000-BA R CHIP 1/16 0 OHM 1608
R118 HRFS103JBA R CHIP 1/16 10K OHM J 1608 R249 HRFS223JBA R CHIP 1/16 22K OHM J 1608
R119 HRFS153JBA R CHIP 1/16 15K OHM J 1608 R250 HRFS473JBA R CHIP 1/16 47K OHM J 1608
R120 HRFS302JBA R CHIP 1/16 3K OHM J 1608 R251 HRFS473JBA R CHIP 1/16 47K OHM J 1608
R121 HRFS562JBA R CHIP 1/16 5.6K OHM J 1608 R252 HRFS331JBA R CHIP 1/16 330 OHM J 1608
R122 HRFS223JBA R CHIP 1/16 22K OHM J 1608 R253 HRFS221JBA R CHIP 1/16 220 OHM J 1608
R123 HRFS101JBA R CHIP 1/16 100 OHM J 1608 R254 HRFS221JBA R CHIP 1/16 220 OHM J 1608
R124 HRFS101JBA R CHIP 1/16 100 OHM J 1608 R255 HRFS221JBA R CHIP 1/16 220 OHM J 1608
R125 HRFS101JBA R CHIP 1/16 100 OHM J 1608 R256 HRFS120JBA R CHIP 1/16 12 OHM J 1608
R126 HRFS101JBA R CHIP 1/16 100 OHM J 1608 R257 HRFS829JBA R CHIP 1/16 8.2 OHM J 1608
R127 HRFS101JBA R CHIP 1/16 100 OHM J 1608 R258 HRFS750JBA R CHIP 1/16 75 OHM J 1608
R128 HRFS101JBA R CHIP 1/16 100 OHM J 1608 R263 HRFS821JBA R CHIP 1/16 820 OHM J 1608
R201 HRFS120JBA R CHIP 1/16 12 OHM J 1608 R264 HRFS120JBA R CHIP 1/16 12 OHM J 1608
R202 HRFS829JBA R CHIP 1/16 8.2 OHM J 1608 R265 HRFS829JBA R CHIP 1/16 8.2 OHM J 1608
R203 HRFS821JBA R CHIP 1/16 820 OHM J 1608 R266 HRFS222JBA R CHIP 1/16 2.2K OHM J 1608
R204 HRFS221JBA R CHIP 1/16 220 OHM J 1608 R267 HRFS750JBA R CHIP 1/16 75 OHM J 1608
R205 HRFS222JBA R CHIP 1/16 2.2K OHM J 1608 R268 HRFS821JBA R CHIP 1/16 820 OHM J 1608
R206 HRFS750JBA R CHIP 1/16 75 OHM J 1608 R269 HRFS120JBA R CHIP 1/16 12 OHM J 1608
R207 HRFS104JBA R CHIP 1/16 100K OHM J 1608 R270 HRFS829JBA R CHIP 1/16 8.2 OHM J 1608
R208 HRFS104JBA R CHIP 1/16 100K OHM J 1608 R271 HRFS222JBA R CHIP 1/16 2.2K OHM J 1608
R209 HRFS681JBA R CHIP 1/16 680 OHM J 1608 R272 HRFS750JBA R CHIP 1/16 75 OHM J 1608
R210 HRFS681JBA R CHIP 1/16 680 OHM J 1608 R273 HRFS821JBA R CHIP 1/16 820 OHM J 1608
R211 HRFS102JBA R CHIP 1/16 1K OHM J 1608 R274 HRFS120JBA R CHIP 1/16 12 OHM J 1608
R212 HRFS104JBA R CHIP 1/16 100K OHM J 1608 R275 HRFS829JBA R CHIP 1/16 8.2 OHM J 1608
R213 HRFS000-BA R CHIP 1/16 0 OHM 1608 R276 HRFS222JBA R CHIP 1/16 2.2K OHM J 1608
R214 HRFS000-BA R CHIP 1/16 0 OHM 1608 R277 HRFS750JBA R CHIP 1/16 75 OHM J 1608
R215 HRFS102JBA R CHIP 1/16 1K OHM J 1608 R278 HRFS821JBA R CHIP 1/16 820 OHM J 1608
R216 HRFS104JBA R CHIP 1/16 100K OHM J 1608 R279 HRFS120JBA R CHIP 1/16 12 OHM J 1608
R217 HRFS102JBA R CHIP 1/16 1K OHM J 1608 R280 HRFS829JBA R CHIP 1/16 8.2 OHM J 1608
R218 HRFS750JBA R CHIP 1/16 75 OHM J 1608 R281 HRFS222JBA R CHIP 1/16 2.2K OHM J 1608
R219 HRFS750JBA R CHIP 1/16 75 OHM J 1608 R282 HRFS750JBA R CHIP 1/16 75 OHM J 1608
R220 HRFS103JBA R CHIP 1/16 10K OHM J 1608 R284 HRFS123JBA R CHIP 1/16 12K OHM J 1608
R221 HRFS103JBA R CHIP 1/16 10K OHM J 1608 R301 HRFS560JBA R CHIP 1/16 56 OHM J 1608
R225 HRFS681JBA R CHIP 1/16 680 OHM J 1608 R302 HRFS560JBA R CHIP 1/16 56 OHM J 1608
R226 HRFS681JBA R CHIP 1/16 680 OHM J 1608 R303 HRFS560JBA R CHIP 1/16 56 OHM J 1608
R227 HRFS183JBA R CHIP 1/16 18K OHM J 1608 R304 HRFS560JBA R CHIP 1/16 56 OHM J 1608
R228 HRFS822JBA R CHIP 1/16 8.2K OHM J 1608 R305 HRFS103JBA R CHIP 1/16 10K OHM J 1608
R229 HRFS750JBA R CHIP 1/16 75 OHM J 1608 R306 HRFS103JBA R CHIP 1/16 10K OHM J 1608
R230 HRFS271JBA R CHIP 1/16 270 OHM J 1608 R307 HRFS103JBA R CHIP 1/16 10K OHM J 1608

35
 BOM LIST

LOC PARTS_CODE PARTS_NAME PARTS_DESCR REMARK LOC PARTS_CODE PARTS_NAME PARTS_DESCR REMARK
R308 HRFS103JBA R CHIP 1/16 10K OHM J 1608 R601 HRFS101JBA R CHIP 1/16 100 OHM J 1608
R309 HRFS682JBA R CHIP 1/16 6.8K OHM J 1608 R602 HRFS103JBA R CHIP 1/16 10K OHM J 1608
R310 HRFS682JBA R CHIP 1/16 6.8K OHM J 1608 R603 HRFS103JBA R CHIP 1/16 10K OHM J 1608
R311 HRFS682JBA R CHIP 1/16 6.8K OHM J 1608 R604 HRFS473JBA R CHIP 1/16 47K OHM J 1608
R312 HRFS682JBA R CHIP 1/16 6.8K OHM J 1608 R605 HRFS393JBA R CHIP 1/16 39K OHM J 1608
R313 HRFS223JBA R CHIP 1/16 22K OHM J 1608 R606 HRFS102JBA R CHIP 1/16 1K OHM J 1608
R314 HRFS223JBA R CHIP 1/16 22K OHM J 1608 R607 HRFS104JBA R CHIP 1/16 100K OHM J 1608
R315 HRFS223JBA R CHIP 1/16 22K OHM J 1608 R608 HRFS120JBA R CHIP 1/16 12 OHM J 1608
R316 HRFS223JBA R CHIP 1/16 22K OHM J 1608 R609 HRFS829JBA R CHIP 1/16 8.2 OHM J 1608
R317 HRFS330JBA R CHIP 1/16 33 OHM J 1608 R610 HRFS750JBA R CHIP 1/16 75 OHM J 1608
R325 HRFS105JBA R CHIP 1/16 1M OHM J 1608 R611 HRFS750JBA R CHIP 1/16 75 OHM J 1608
R326 HRFS101JBA R CHIP 1/16 100 OHM J 1608 R902 HRFS330JBA R CHIP 1/16 33 OHM J 1608
R327 HRFS101JBA R CHIP 1/16 100 OHM J 1608 R904 HRFS330JBA R CHIP 1/16 33 OHM J 1608
R328 HRFS103JBA R CHIP 1/16 10K OHM J 1608 R906 HRFS330JBA R CHIP 1/16 33 OHM J 1608
R329 HRFS103JBA R CHIP 1/16 10K OHM J 1608 R908 HRFS330JBA R CHIP 1/16 33 OHM J 1608
R331 HRFS000-BA R CHIP 1/16 0 OHM 1608 R910 HRFS330JBA R CHIP 1/16 33 OHM J 1608
R401 HRFS000-BA R CHIP 1/16 0 OHM 1608 R912 HRFS330JBA R CHIP 1/16 33 OHM J 1608
R402 HRFS101JBA R CHIP 1/16 100 OHM J 1608 R914 HRFS330JBA R CHIP 1/16 33 OHM J 1608
R403 HRFS101JBA R CHIP 1/16 100 OHM J 1608 R916 HRFS330JBA R CHIP 1/16 33 OHM J 1608
R404 HRFS103JBA R CHIP 1/16 10K OHM J 1608 R917 HRFS472JBA R CHIP 1/16 4.7K OHM J 1608
R405 HRFS103JBA R CHIP 1/16 10K OHM J 1608 R918 HRFS222JBA R CHIP 1/16 2.2K OHM J 1608
R406 HRFS103JBA R CHIP 1/16 10K OHM J 1608 R919 HRFS222JBA R CHIP 1/16 2.2K OHM J 1608
R408 HRFS472JBA R CHIP 1/16 4.7K OHM J 1608 R920 HRFS222JBA R CHIP 1/16 2.2K OHM J 1608
R409 HRFS472JBA R CHIP 1/16 4.7K OHM J 1608 R921 HRFS222JBA R CHIP 1/16 2.2K OHM J 1608
R410 HRFS472JBA R CHIP 1/16 4.7K OHM J 1608 R922 HRFS222JBA R CHIP 1/16 2.2K OHM J 1608
R411 HRFS472JBA R CHIP 1/16 4.7K OHM J 1608 U101 97P65445MA PCB MAIN 146X112(146X234/2) D2V
R414 HRFS472JBA R CHIP 1/16 4.7K OHM J 1608 X301 5XJ27R00SE CRYSTAL QUARTZ HC-49/S 27.000MHZ 20PF 30PPM (SMD)
R416 HRFS101JBA R CHIP 1/16 100 OHM J 1608 Z0012 PVMPJRM086 PCB MAIN RADIAL AS DSD-9255M
R417 HRFS101JBA R CHIP 1/16 100 OHM J 1608 C151 CEXF1H220V C ELECTRO 50V RSS 22MF (5X11) TP
R418 HRFS101JBA R CHIP 1/16 100 OHM J 1608 C152 CEXE1C101E C ELECTRO 16V RM 100MF 5X11
R419 HRFS101JBA R CHIP 1/16 100 OHM J 1608 C154 CEXE1C101E C ELECTRO 16V RM 100MF 5X11
R420 HRFS101JBA R CHIP 1/16 100 OHM J 1608 C155 CEXE1C101E C ELECTRO 16V RM 100MF 5X11
R421 HRFS101JBA R CHIP 1/16 100 OHM J 1608 C156 CEXF1H220V C ELECTRO 50V RSS 22MF (5X11) TP
R422 HRFS101JBA R CHIP 1/16 100 OHM J 1608 C157 CEXF1H220V C ELECTRO 50V RSS 22MF (5X11) TP
R423 HRFS560JBA R CHIP 1/16 56 OHM J 1608 C158 CEXF1H220V C ELECTRO 50V RSS 22MF (5X11) TP
R424 HRFS103JBA R CHIP 1/16 10K OHM J 1608 C251 CEXF1C100A C ELECTRO 16V RSM 10MF 5X7
R429 HRFS103JBA R CHIP 1/16 10K OHM J 1608 C252 CEXF1C100A C ELECTRO 16V RSM 10MF 5X7
R430 HRFS103JBA R CHIP 1/16 10K OHM J 1608 C253 CEXF1H479V C ELECTRO 50V RSS 4.7MF (5X11) TP
R431 HRFS103JBA R CHIP 1/16 10K OHM J 1608 C254 CEXF1H479V C ELECTRO 50V RSS 4.7MF (5X11) TP
R432 HRFS103JBA R CHIP 1/16 10K OHM J 1608 C255 CEXE1C101E C ELECTRO 16V RM 100MF 5X11
R438 HRFS103JBA R CHIP 1/16 10K OHM J 1608 C256 CEXE1C101E C ELECTRO 16V RM 100MF 5X11
R439 HRFS103JBA R CHIP 1/16 10K OHM J 1608 C257 CEXE1C101E C ELECTRO 16V RM 100MF 5X11
R440 HRFS103JBA R CHIP 1/16 10K OHM J 1608 C258 CEXE1C101E C ELECTRO 16V RM 100MF 5X11
R441 HRFS103JBA R CHIP 1/16 10K OHM J 1608 C259 CEXF1C220A C ELECTRO 16V RSM 22MF (5X7)
R442 HRFS103JBA R CHIP 1/16 10K OHM J 1608 C260 CEXE1C101E C ELECTRO 16V RM 100MF 5X11
R443 HRFS153JBA R CHIP 1/16 15K OHM J 1608 C261 CEXE1C101E C ELECTRO 16V RM 100MF 5X11
R444 HRFS153JBA R CHIP 1/16 15K OHM J 1608 C262 CEXF1C220A C ELECTRO 16V RSM 22MF (5X7)
R445 HRFS101JBA R CHIP 1/16 100 OHM J 1608 C263 CEXF1C220A C ELECTRO 16V RSM 22MF (5X7)
R446 HRFS101JBA R CHIP 1/16 100 OHM J 1608 C264 CEXF1C220A C ELECTRO 16V RSM 22MF (5X7)
R447 HRFS103JBA R CHIP 1/16 10K OHM J 1608 C265 CEXF1C220A C ELECTRO 16V RSM 22MF (5X7)
R448 HRFS103JBA R CHIP 1/16 10K OHM J 1608 C266 CEXF1H479V C ELECTRO 50V RSS 4.7MF (5X11) TP
R449 HRFS103JBA R CHIP 1/16 10K OHM J 1608 C268 CEXF1H479V C ELECTRO 50V RSS 4.7MF (5X11) TP
R450 HRFS000-BA R CHIP 1/16 0 OHM 1608 C269 CEXF1C220A C ELECTRO 16V RSM 22MF (5X7)
R451 HRFS000-BA R CHIP 1/16 0 OHM 1608 C270 CEXE1C101E C ELECTRO 16V RM 100MF 5X11
R452 HRFS000-BA R CHIP 1/16 0 OHM 1608 C271 CEXE1C101E C ELECTRO 16V RM 100MF 5X11

36
 BOM LIST

LOC PARTS_CODE PARTS_NAME PARTS_DESCR REMARK LOC PARTS_CODE PARTS_NAME PARTS_DESCR REMARK
C272 CEXF1C470A C ELECTRO 16V RSM 47MF (5X7) TP R723 RD-AZ330J- R CARBON FILM 1/6 33 OHM J
C273 CEXE1C101E C ELECTRO 16V RM 100MF 5X11 R724 RD-AZ560J- R CARBON FILM 1/6 56 OHM J
C351 CEXF1C220A C ELECTRO 16V RSM 22MF (5X7) U701 97P65445LA PCB LOGIC 28X300(330X246/7)
C352 CEXF1C100A C ELECTRO 16V RSM 10MF 5X7 Z008 PVPWMSM086 PCB POWER MANUAL AS DSD-9255M
C353 CEXF1C100A C ELECTRO 16V RSM 10MF 5X7 AM801 2193100801 SOLDER WIRE SN:PB=63:37 3PI(NO FLUX)
C354 CEXF1C100A C ELECTRO 16V RSM 10MF 5X7 AM802 2193100801 SOLDER WIRE SN:PB=63:37 3PI(NO FLUX)
C355 CEXF1C220A C ELECTRO 16V RSM 22MF (5X7) AM803 2291050305 FLUX LIQUID RF-800KN
C356 CEXF1C220A C ELECTRO 16V RSM 22MF (5X7) AM804 2291050306 FLUX THINNER RF-800ADD
C357 CEXF1C100A C ELECTRO 16V RSM 10MF 5X7 C801 CL2EE3104M C LINE ACROSS AC 275V 0.1MF M PCX2 335M
C358 CEXF1C100A C ELECTRO 16V RSM 10MF 5X7 C802 CH1CEE472M C CERA AC 2.5KV 4700PF M DE AC250V
C451 CEXF1C220A C ELECTRO 16V RSM 22MF (5X7) C803 CH1TFE222M C CERA AC 4.0KV 2200PF M AD AC250V
C452 CEXF1C220A C ELECTRO 16V RSM 22MF (5X7) C804 CEXF2G470V C ELECTRO 400V RSS 47MF 16X25
C453 CEXF1C220A C ELECTRO 16V RSM 22MF (5X7) C812 CEXK1V471L C ELECTRO 35V 470MF KXL
C454 CEXF1C220A C ELECTRO 16V RSM 22MF (5X7) C813 CEXK1E681L C ELECTRO 25V 680UF KXL
C455 CEXF1C100A C ELECTRO 16V RSM 10MF 5X7 C814 CEXK1C102L C ELECTRO 16V 1000UF KXL (10X20)
C651 CEXF1C100A C ELECTRO 16V RSM 10MF 5X7 C816 CEXK1C681L C ELECTRO 16V 680UF KXL
C652 CEXF1C100A C ELECTRO 16V RSM 10MF 5X7 D801 DS1WBA60 DIODE BRIDGE S1WBA60
C653 CEXF1C220A C ELECTRO 16V RSM 22MF (5X7) D810 DSF24G DIODE SF24G
C951 CEXF1C100A C ELECTRO 16V RSM 10MF 5X7 D812 DSF24G DIODE SF24G
D101 D1N4004SRT DIODE 1N4004SRT D813 DSR306 DIODE SCHOTTKY SR306
D102 D1N4004SRT DIODE 1N4004SRT D814 DSR306 DIODE SCHOTTKY SR306
D103 D1N4004SRT DIODE 1N4004SRT IC801 1LTV817MDW IC PHOTO COUPLER LVT-817M-DW
D104 D1N4004SRT DIODE 1N4004SRT L801 5PLFSF212A FILTER LINE SF-2120A
R108 RN01B102JS R METAL FILM 1W 1K OHM J SMALL L807 5PLFBLF216 FILTER LINE BLF-2116
R109 RN01B102JS R METAL FILM 1W 1K OHM J SMALL P801 97P62Y02X2 CONN WAFER YFW800 STR 10MM 2P
R222 RN01B561JS R METAL FILM 1W 560 OHM J SMALL P802 97P885X225 CONN AS YH025-15+YBNH250-15+ULW=170
S101 5SC0000002 SW POLY RXE065-2 P803 97P62Y02X2 CONN WAFER YFW800 STR 10MM 2P
Z001A 7174300811 SCREW TAPPTITE TT2 RND 3X8 MFZN Q805 TKSC5027FR TR KSC5027FR
Z003 PVLAMSM086 PCB LOGIC MANUAL AS DSD-9255M Q805A 97Q4400100 RADIATOR TR AL EX
AM701 2193100801 SOLDER WIRE SN:PB=63:37 3PI(NO FLUX) Q805B 7174300811 SCREW TAPPTITE TT2 RND 3X8 MFZN
AM702 2193100801 SOLDER WIRE SN:PB=63:37 3PI(NO FLUX) R801 RW02B229J- R WIRE WOUND 2W 2.2 OHM J
AM703 2291050305 FLUX LIQUID RF-800KN Z0081 PVPWJRM086 PCB POWER RADIAL AS DSD-9255M
AM704 2291050306 FLUX THINNER RF-800ADD C805 CEXF2C109V C ELECTRO 160V RSS 1MF (6.3X11) TP
AM705 2291140501 WAX COVER C806 CBXB3A101K C CERA SEMI 1KV RR 100PF K
G701 DLTC4627G- LED DISPLAY LTC-4627G-01 C807 CMXL2G333K C MYLAR 400V MEU 0.033MF K
H701 10RC356HF6 IC UNIT R/RECEIVER ORC-356HF6 C808 CMXM2A473J C MYLAR 100V 0.047MF J (TP)
P702 97P62K05EM CONN FFC SCB-2021-M-2 21P RA C809 CMXM2A472J C MYLAR 100V 4700PF J (TP)
Z0031 PVLAJRM086 PCB LOGIC RADIAL AS DSD-9255M C810 CMXM2A473J C MYLAR 100V 0.047MF J (TP)
SW701 5S50101Z90 SW TACT THVV502GDA C811 CEXK1H470L C ELECTRO 50V 47MF KXL
SW702 5S50101Z90 SW TACT THVV502GDA C815 CEXF1C221V C ELECTRO 16V RSS 220MF (8X11.5) TP
SW703 5S50101Z90 SW TACT THVV502GDA C817 CEXF1C221V C ELECTRO 16V RSS 220MF (8X11.5) TP
SW704 5S50101Z90 SW TACT THVV502GDA C822 CEXF1H330V C ELECTRO 50V RSS 33MF (6.3X11) TP
SW705 5S50101Z90 SW TACT THVV502GDA C825 CEXF1H101V C ELECTRO 50V RSS 100MF (8X11.5) TP
SW706 5S50101Z90 SW TACT THVV502GDA C826 CEXF1E221V C ELECTRO 25V RSS 220MF (8X11.5) TP
SW707 5S50101Z90 SW TACT THVV502GDA C827 CEXF1H101V C ELECTRO 50V RSS 100MF (8X11.5) TP
Z0032 PVLAJAM086 PCB LOGIC AXIAL AS DSD-9255M C828 CEXF1H220V C ELECTRO 50V RSS 22MF (5X11) TP
C720 CCZF1H104Z C CERA HIKF 50V 0.1MF Z AXIAL C829 CEXE1C101E C ELECTRO 16V RM 100MF 5X11
JP701 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING C830 CEXF1C470A C ELECTRO 16V RSM 47MF (5X7) TP
JP702 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING C831 CEXE1C101E C ELECTRO 16V RM 100MF 5X11
JP703 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING C832 CEXF1C331V C ELECTRO 16V RSS 330MF (8X11.5) TP
JP704 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING C834 CEXF1C331V C ELECTRO 16V RSS 330MF (8X11.5) TP
JP705 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING C835 CEXF1C470A C ELECTRO 16V RSM 47MF (5X7) TP
JP706 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING C836 CEXF1C331V C ELECTRO 16V RSS 330MF (8X11.5) TP
JP707 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING C837 CEXF1C331V C ELECTRO 16V RSS 330MF (8X11.5) TP
JP708 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING F801 5FWPS2022L FUSE WIDE TL 250V 2A CASE

37
 BOM LIST

LOC PARTS_CODE PARTS_NAME PARTS_DESCR REMARK LOC PARTS_CODE PARTS_NAME PARTS_DESCR REMARK
IC802 1KA431AZ IC REGULATOR KA431AZ 1% TO-92 JP801 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING
L803 56C220K695 COIL CHOKE(CAP TYPE) 22UH K 9X11.1 (CAP TYPE) JP802 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING
L804 56C220K695 COIL CHOKE(CAP TYPE) 22UH K 9X11.1 (CAP TYPE) JP803 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING
L805 56C220K695 COIL CHOKE(CAP TYPE) 22UH K 9X11.1 (CAP TYPE) JP805 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING
L806 56C220K695 COIL CHOKE(CAP TYPE) 22UH K 9X11.1 (CAP TYPE) L802 5PB13857 COIL BEAD BI3857(AXIAL)
Q801 TZTC3205Y- TR KTC3205Y (2236Y) R802 RD-2Z565J- R CARBON FILM 1/2 5.6M OHM J
Q802 TZTC3203Y- TR KTC3203Y (2120Y) R803 RD-4Z394J- R CARBON FILM 1/4 390K OHM J
Q803 TZTC3205Y- TR KTC3205Y (2236Y) R804 RD-4Z394J- R CARBON FILM 1/4 390K OHM J
Q804 TZRC1204 TR KRC1204 (AUTO) R805 RD-AZ273J- R CARBON FILM 1/6 27K OHM J
Q806 TZTC3205Y- TR KTC3205Y (2236Y) R807 RD-AZ560J- R CARBON FILM 1/6 56 OHM J
R806 RN01B104JS R METAL FILM 1W 100K OHM J SMALL R809 RD-AZ681J- R CARBON FILM 1/6 680 OHM J
R808 RN02B560JS R METAL FILM 2W 56 OHM J SMALL R810 RD-4Z221J- R CARBON FILM 1/4 220 OHM J
Z0082 PVPWJAM086 POWER AXIAL AUTO AS DSD-9255M R812 RN-AZ122F- R METAL FILM 1/6 1.2K OHM F
C818 CCZF1H104Z C CERA HIKF 50V 0.1MF Z AXIAL R813 RN-AZ3301F R METAL FILM 1/6 3.3K OHM F
C819 CBZP1C103M C CERA SEMI 16V Y5S 0.01MF M (AXIAL) R814 RD-AZ681J- R CARBON FILM 1/6 680 OHM J
C820 CBZP1C103M C CERA SEMI 16V Y5S 0.01MF M (AXIAL) R815 RD-AZ222J- R CARBON FILM 1/6 2.2K OHM J
C823 CBZP1C103M C CERA SEMI 16V Y5S 0.01MF M (AXIAL) R816 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
C824 CBZP1C103M C CERA SEMI 16V Y5S 0.01MF M (AXIAL) R817 RD-AZ202J- R CARBON FILM 1/6 2K OHM J
D805 DHER108S DIODE HER108S A-405 TYPE R818 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
D806 DZN4004S DIODE 1N4004S(AUT0) U801 97P65442PA PCB POWER 75X199(247X199/3) D1B
D807 DZUZ3R0BSB DIODE ZENER UZ-3.0BSB(3.01-3.22V) Z801A 7278300611 SCREW TAPPTITE TT3 WAS 3X6 MFZN
D808 DZN4148 - DIODE 1N4148 AUTO 52MM Z801B 7174300811 SCREW TAPPTITE TT2 RND 3X8 MFZN
D809 DZ1F3E DIODE FR 1F3E Z901 PVJMMSM086 PCB JACK MANUAL AS DSD-9255M
D811 DZUZ33BSB- DIODE ZENER UZ-33BSB(30.32-31.38V) AJ01 2193100801 SOLDER WIRE SN:PB=63:37 3PI(NO FLUX)
D815 DKUZ13BSB- DIODE ZENER UZ-13BSB(12.59-13.16V)A26 AJ02 2193011100 SOLDER WIRE 60 SNA 1.2D
D816 DZUZ5R6BSB DIODE ZENER UZ-5.6BSB(5.46-5.70V) JK602 97P0S03000 JACK SENSOR OPTIC VST5B-12M
D817 DZUZ5R6BSB DIODE ZENER UZ-5.6BSB(5.46-5.70V) P602 97P62K04E9 CONN FFC SCB-2109-M-2 09P ST
D819 DZN4004S DIODE 1N4004S(AUT0) RF601 97P7214400 MODULATOR RF SS M-GKI1
D821 DZN4004S DIODE 1N4004S(AUT0) U601 97P65442JA PCB JACK 48.5X42.5(197X199/16) D1B

38
SCHEMATIC DIAGRAM

39
 SCHEMATIC DIAGRAM

40
SCHEMATIC DIAGRAM

41
 SCHEMATIC DIAGRAM

42
SCHEMATIC DIAGRAM

43
 SCHEMATIC DIAGRAM

44
PARTS PLACEMENT(ARRANGEMENT)

45
 PARTS PLACEMENT(ARRANGEMENT)

46
 PARTS PLACEMENT(ARRANGEMENT)

DSD-9255 FRONT DSD-9256 FRONT

47
 PARTS PLACEMENT(ARRANGEMENT)

48
DAEWOO ELECTRONICS Corp.
686, AHYEON-DONG MAPO-GU
SEOUL, KOREA
C.P.O. BOX 8003 SEOUL, KOREA