Scribd
Upload
115 views1 page

Low-Loss Power Splitters - Multi-Band 800 - 2500 MHZ 860 10017, 860 10018, 860 10019

This document provides specifications for low-loss power splitters for frequencies between 800-2500 MHz. It describes 3 models - a 2-way, 3-way, and 4-way splitter. The splitters have N female connectors, support up to 100W of power, have VSWR less than 1.25, intermodulation distortion below -150 dBc, 50 ohm impedance, less than 0.05 dB insertion loss, weigh approximately 0.6 kg, and can transmit DC between terminations to support remote power supply systems.

Uploaded by

Zoheir Kacimi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
115 views1 page

Low-Loss Power Splitters - Multi-Band 800 - 2500 MHZ 860 10017, 860 10018, 860 10019

This document provides specifications for low-loss power splitters for frequencies between 800-2500 MHz. It describes 3 models - a 2-way, 3-way, and 4-way splitter. The splitters have N female connectors, support up to 100W of power, have VSWR less than 1.25, intermodulation distortion below -150 dBc, 50 ohm impedance, less than 0.05 dB insertion loss, weigh approximately 0.6 kg, and can transmit DC between terminations to support remote power supply systems.

Uploaded by

Zoheir Kacimi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Low-loss Power Splitters – Multi-band

800 – 2500 MHz


860 10017, 860 10018, 860 10019 Peliminary Issue

For indoor use.

2-way Splitter 800–2500


3-way Splitter 800–2500
4-way Splitter 800–2500

Type No. 860 10017 860 10018 860 10019

Connector N female
Max. power 100 W (at 50 °C ambient temperature)
For connecting ... antennas 2 3 4
Frequency range 800 – 2500 MHz
VSWR < 1.25 < 1.25 < 1.3
Intermodulation IM3 < -150 dBc
(2 x 43 dBm carrier)
Impedance 50 Ω
Insertion loss < 0.05 dB
Weight appr. 0.6 kg
Profile cross-section 25 mm x 25 mm
Packing size 242 mm x 110 mm x 95 mm
Max. size 204 mm / 63 mm / 41 mm

Material: Housing: Aluminum.


Inner conductor: Brass.

DC capability: DC transmission between all terminations


(suitbale for remote power supply systems).

Input
860 10019
Subject to alteration.
936.A2035

page 1 of 1 860 10017 –19


Internet: http://www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . PO Box 10 04 44 . D-83004 Rosenheim . Germany . Telephone +49 8031 1 84-0 . Fax +49 8031 1 84-9 73

You might also like