Mobile Training

APG 40
Basic AP Information

prcstate Print whether the AP node is active or passive.

hostname Print the computer (host) name of the AP node.
swrprod Print a summary of installed software.
swrprint Print a list of installed software (use the '-l' parameter for a detailed list)
date /t Print the current system date
time /t Print the current system time
sfcstate Print the current soft function change state of the node.
fchstart -V Print the current hard function change state of the node.
echo %USERDOMAIN%\%USERNAME% Print the username that you are currently
logged on as.

AP Cluster and Node Status

alist List alarms

cluster node Print the status of cluster nodes
cluster group Print the status of the cluster groups
cluster res Print the status of the cluster resources
cluster res | find /v "Online" Print the status of the cluster resources that are not Online
cluster net Print the status of the cluster networks
cluster netint Print the status of the cluster network interfaces
net start List started Windows NT services
pstat | find "pid:" List processes

Network Configuration and Status

ipconfig /all Display full IP configuration information.

route print Display IP interface list and IP routing table.
netstat -a Display all IP connections and listening ports.
cluster netint /prop List the properties of all Cluster network interfaces.
cluster netint /prop | find "Address" List the IP addresses of all Cluster network interfaces.
netstat -e -s Display current ethernet and network protocol statistics
arp -a Display the IP-to-Physical address translation tables used by address
resolution protocol.

Hardware Status
fcc_amtest own Test the AM board of the own AP node.
fcc_amtest other Test the AM board of the other AP node.
Note: These commands need to be executed from the
directory 'C:\Program Files\FORCE\AM_Services' .

Command Survey WCDMA CN 2.0 / GSM R9.1 Switzerland EAS/G-02-9013 Rev. I APG-1
 Mobile Training

AP-CP Communication (AP commands)

cpdlist –l List defined Alphanumeric Devices (ADs) (printout categiroes)

cpdlist –a (userID and remote host of the device)
cpdlist -p (default log and program directories)
cuals List the mapping between APG40 groups and AXE users for determining AXE
command rights.
bupprint -a Print all parameters that are used for backup generation handling and
command log handling that are connected with AXE reload.

AP-CP Communication (AXE commands)

APAMP; Print the LAN status for all APs.

IOMSP; Print the route definitions and current session data of the Man-Machine
Language (MML) service. The command is used to determine whether the
MML service is active or not.
OCINP:IPN=ALL; Printout of data and state for all Inter-Platform Network (IPN) devices.
IOUAP:USER=ALL; Print out the table of users, groups and authority options for all system
users.

FMS Status and Configuration

cpfls List all defined CP files.

cpfls -ls <filename> List the details, and subfiles, of a CP file.

Stopping, Starting and Restarting the APG40

prcboot Reboot the AP node currently logged onto.

prcboot -s Shut down the AP node currently logged onto.
fcc_reset other Give a hard reset to the other AP node.
fcc_save_to_remove other Ready SCSI bus for node replacement.
fcc_integrate other Bring SCSI bus back online.
net stop clussvc Manually stop the cluster service on this node.
net start clussvc Manually start the cluster service on this node.
net accounts /sync Synchoronise the user accounts database (PDC and BDC).

Command Survey WCDMA CN 2.0 / GSM R9.1 Switzerland EAS/G-02-9013 Rev. I APG-2
 Mobile Training

acease AP Alarms Ceasing alarmIdentifier

ACS_UAC User Access Control, User Lock [ -f maxfailures ] [ -i scaninterval] [restarttype]
_UsrLockd Daemon
afpchd Adjunct Processor File Processing, [ -b yes|no] [ -d removedelay ] [ -r retries] [ -s defaultstatus]
File Definition, Change [ -t retryinterval] transferqueue destination
afpdef Adjunct Processor File Processing, [ -b yes|no] [ -d removedelay ] [ -g template [-j rename]]
File, Define [ -r retries] [ -s defaultstatus ] [ -t retryinterval]
[ -w sourcedirectory] transferqueue destination
afpfte Adjunct Processor File Processing, -c file -z directory transferqueue destination
Manual Transfer, End
afpfti Adjunct Processor File Processing, -c file -z directory transferqueue destination
Manual Transfer, Initiate -f transferqueue destination [newdestination]
-f transferqueue
afpls Adjunct Processor File Processing, [ -l] [ -s] [ transferqueue [destination] ]
Files, List -l [ -q] [ -s] [ transferqueue [destination] ]
-o -y [ -l] transferqueue destination
-l -o -y [ -q] transferqueue destination
-a [ -q] transferqueue destination
afprm Adjunct Processor File Processing, [ -c file -z directory ] transferqueue [destination]
File, Delete
aldblk Alarm-Display, Block ald
alddeblk Alarm-Display, Deblock ald
alddef Alarm-Display Data, Define [ -i information ] [ - l lampprop] [ -s soundprop] [ -S] ald
-p port1 [ -i information] ald
-a address - p port2 [ -i information] [ -l lampprop]
[ -s soundprop] [ -S] ald
aldls Alarm-Display Data, List
aldpdef Alarm-Display Property, Define -l lampprop [ -1 alcat] [ -2 alcat] [ -3 alcat] [ -4 alcat]
-s soundprop [ -a sd] [ -b sd] [ -c sd] [ -d sd] [ -e sd ]
aldpls Alarm-Display Properties, List
aldprm Alarm-Display Property, Delete -l lampprop
-s soundprop
aldquiet Alarm-Display, Quiet ald
aldrm Alarm-Display Data, Delete ald
aldtest Alarm-Display, Test [ -b] [ -e] ald
alist AP Alarms Listing [ -b -e] [ -i specificProblem[ indexNumber] ] [ -s alarmClass]
[ -x probableCause] [numberOfAlarms ]
alogact Audit Log, Activate
alogdeact Audit Log, Deactivate
alogexcl Audit Log Exclusion, Insert or End -t type -x|-e item
alogexls Audit Log, Excluded Items, List
alogfind Audit Log, Search [ -d device ] [ - u user] [ -a start_time -e start_date] [ -b
stop_time -f stop_date] [ -e start_date] [ -f stop_date ]
[ - r remote_host] [ -i session_id ] [ - t type ] [ - s string]

Command Survey WCDMA CN 2.0 / GSM R9.1 Switzerland EAS/G-02-9013 Rev. I APG-3
 Mobile Training

aloglist Audit Log Attributes, List

alogset Audit Log, Set Attributes [ -f Filesize ...] [ -d File_Destination ...]
aprint Parameter Handling, Print [ -l level] [parameter_name]
[ -t named_table] [parameter_name]
bupprint Backup Parameters, Print [ -a] [ -c] [ -d] [ -l] [ -m] [ -s]
bupset Backup Parameters, Set [ -f] [ -r] [ -1 INCL1] [ -2 INCL2] [ -c NTCZ] [ -d INCLA]
[ -m CLH] [ -o LOAZ] [ -s SUP] [ -t NTAZ]
burbackup AP, Backup, Initiate burbackup
-src Source_Directory -dest Destination_Directory
-src Source_Directory -imgdest Destination_File
-imgsrc Source_File -dest Destination_Directory
-savedatadiskinfo Destination_File
-restoredatadiskinfo Source_File
burbup Create a Backup of the AP System
on Tape
burres Restore a Backup of the AP [primary_disk_device mirror_disk_device ]
System from Tape
burrestore AP, Restore, Initiate [ -stay]
burver Verify that a Backup Tape is
Readable
cchres Configuration Change Restore
cdhch Common Destination Handling, [ -a address ] destination
Destination, Change [ -a address ] [ -r remote_dir] [ -n portnr] [ -u user_name]
[ -p] [ -c connect_type ] [ -o overwrite] destination
[ -a address ] [ -c connect_type] [ -o overwrite] destination
[ -a address ] [ -e event_type] [ -f address] [ -o overwrite ]
[ -x portnr] [ -y response_time] destination
cdhdef Common Destination Handling, -a address -t transtype destination
Destination, Define -a address -t transtype [ -r remote_dir] [ -n portnr]
[ -u user_name] [ -p] [ -c connect_type] [ -o overwrite]
destination
-a address -t transtype -c connect_type [ -o overwrite]
destination
-a address [ -e event_type] -t transtype -c connect_type
-f address [ -o overwrite] -x portnr [ -y response_time]
destination

cdhls Common Destination Handling, [ -l] [destination]

Destination, List
cdhrm Common Destination Handling, destination
Destination, Delete
cdhver Common Destination Handling, [ -m] destination
Destination Connection, Verify
cpdchange IO Device in CP, Attributes, -d dest device
Change [ -e eol] [ -n eop] [ - r time] [ -s no|yes] [ -v prca] [ -y lines]
[ - z none|ff] device

Command Survey WCDMA CN 2.0 / GSM R9.1 Switzerland EAS/G-02-9013 Rev. I APG-4
 Mobile Training

cpdinsert IO Device in CP, Insert -c cmd [ -r time] [ - s] [ -v prca] [ -y lines] [ -z none|ff] device
-f file [ -r time] [ - s] [ -v prca] [ -y lines] [ -z none|ff] device
-i ip [ -b ] [ -e eol] [ - n eop] [ -r time] [ -s] [ -v prca] [ -y lines]
[ -z none|ff] device
-q port [ -b ] [ -e eol] [ - m ipmask] [ -n eop] [ -r time] [ -s]
[ -v prca ] [ - y lines] [ -z none|ff] device
-x time [ -r time] [ - s] [ -v prca] [ -y lines] [ -z none|ff] device
-t type [ -e eol] [ - n eop] [ -p params] [ -r time] [ -s]
[ -v prca ] [ - y lines] [ -z none|ff] device
device
cpdlist IO Device in CP, Attributes, List [ -a -l - p -t type]
cpdremov IO Device in CP, Remove device ...
e
cpdtest IO Device in CP, Test [ -c -m -p -s]
cpfchange Central Processor File System, -s maxsize | no file
File Attributes, Change [ -s maxsize | no] -t maxtime | no file
[ -s maxsize | no] [ -t maxtime | no] -r yes | no file
cpfcp Central Processor File System, [ -m mode] file1[-subfile1[-generation1]]
File, Copy file2[-subfile2[-generation2]]
cpfdf Central Processor File System, [ -q]
Volumes, List
cpfife Central Processor File System, file
Infinite File, End
cpfls Central Processor File System, -p file [-subfile]
Files, List [ -l] [ -s] [ -q] [file]
[ -l] [ -q] file-subfile[-generation]
cpfmkfile Central Processor File System, [ -f reg] -l rlength [ -c] file volume
File, Create -f inf -l rlength [ -s maxsize] [ -t maxtime] [ -r] file volume
-f dl -l rlength file volume
file-subfile[-generation]
cpfmv Central Processor File System, file volume
File, Move
cpfport Central Processor File System, -e [ -m mode] file[-subfile[-generation]] path
File, Transfer -i [ -m mode] path file[-subfile[-generation]]
cpfrename Central Processor File System, file1 file2
File, Rename file-subfile1[-generation1] file-subfile2[-generation2]
cpfrm Central Processor File System, [ -r] file
File, Delete file-subfile[-generation]
cuadef Central Processor User -g group -u cpuser [-c "comment"] [-p position]
Association, Define
cuals Central Processor User
Association, List
cuarm Central Processor User -a
Association, Remove -g group
-u cpuser

Command Survey WCDMA CN 2.0 / GSM R9.1 Switzerland EAS/G-02-9013 Rev. I APG-5
 Mobile Training

dfoch Direct File Output, File Definition, transferqueue destination

Change
dfodef Direct File Output, File, Define -s secured transferqueue destination
dfols Direct File Output, File Definition, [transferqueue]
List
dform Direct File Output, File, Delete transferqueue
dsdls Directory Service Listing [ -a]
exalblk External Alarm Receiver, Block receiver
-b receiver -e receiver
exalch External Alarm Receiver Data, -s slogan1 -c class -C category [ -o open] [ -m clear]
Change [ -S slogan2] [ -t time] [ -f file] receiver
[ -o open] [ -m clear] [ -t time] [ -c class] [ -C category]
-b receiver -e receiver
exalclear External Alarm Receiver, Manually receiver
Clear
exaldeblk External Alarm Receiver, Deblock receiver
-b receiver -e receiver
exaldef External Alarm Receiver Data, -s slogan1 -c class -C category [ -o open] [ -m clear]
Define [ -S slogan2] [ -t time] [ -f file] receiver
exalls External Alarm Receiver Data, List [receiver]
-l [receiver]
-f
-f receiver
[ -f | -l] -b receiver -e receiver
exalrm External Alarm Receiver Data, receiver
Delete -b receiver -e receiver
fchcommit Function Change Commit
fchend Function Change End
fchfb Function Change, Fallback [ -y]
fchrst Function Change, Restore
fchstart Function Change, Start [ -p] [ -P file] [ -r] [ -d directory ] [ - l file] [ -L] [ -i file]
-V
fchsudo Function Change Set User [argument ...]
ftpcreate Ftp Create -n ServerName -d RootDirectory -i IpAddress -p port
ftpls Ftp List -n Servername
ftprm Ftp Remove -n ServerName
hwifetch Node Position, Fetch
hwiset Node Position, Set XValue YValue
IntegrityAP Integrity Verification [ -c] [ -n] [ -t]

Command Survey WCDMA CN 2.0 / GSM R9.1 Switzerland EAS/G-02-9013 Rev. I APG-6
 Mobile Training

ipnaadm IPNA Administration -state state -ipnano ipnano

-list
-osdump
-osdump -list
-osdump -get <file>
[-help|-h|?]
ispprint ISP Print Tool [ -a] [ -g] [ -t starttime] [ -x endtime ]
mktr Make Trouble Report YYMMDD-HHMM [-d]
mml Man-Machine Language, [ -ac] [ -s -Q] [ -d device] [ -i device -I device] [ - y lines]
Commands, Execute [ -s] [ -d device] [ - i device -I device] [ -r time] [ -w time]
command ...
[ -bcs] [ -l line] [ -r time] [ -w time] - f file
msdls Message Store Listing msdls
-m message_store -s site -d data_file [ -n -t]
-m message_store -s site [ -a]
-m message_store -s site -S
mtzln Multiple Time Zone Link -p
[ -f] TZ_name TMZ_value
-r TMZ_value
phabup Parameter Handling, Backup file
phacreate Parameter Handling, Create [ -c -D] [ -a application_name] CXC_name ... [-a
application_name CXC_name...] ...
[ -c -y] prod_id ...
phaedit Parameter Handling, Edit prod_id
pharm Parameter Handling, Remove [ -a application_name ] [ - v revision] CXC_name
[ -y] prod_id
pharst Parameter Handling, Restore [ -y] file
phatrans Parameter Handling, Transfer source_directory target_directory
source_cxc [target_cxc]
prcboot Process Control, Reboot [ -s]
prcconf Process Control, Cluster [ -c -d] filename
Configuration
prcgen Process Control, Configuration [ -g resourcegroup -r resource -i instance ]
File, Generate
prcstate Process Control, Determine State
prcutil Process Control User Interface [command]
sadfsconf System Analysis Daemon -p
FileSystem Configuration -d filesystemName ...
-i filesystemName ...
[ -c ceaseSpan ] -s severity ... -a alarmLimit ...
filesystemName ...
seccease AP Security Cease Defined Alarm alarm_id
seccheck AP Security Full Check [-a alarm_mode] [-l script_list] [-m mail_address]
[-s screen_mode] [-r]

Command Survey WCDMA CN 2.0 / GSM R9.1 Switzerland EAS/G-02-9013 Rev. I APG-7
 Mobile Training

seclogfind AP Security Find In Log File request_tag

secmlmnt AP Security Monitoring List, secmlmnt
Maintain -u|-d [-f file] [-p file]
-a -f file | -p file | -f file -p file
sfcend Soft Function Change, End
sfcexec Soft Function Change, Execute
sfcfb Soft Function Change, Fallback
sfcnew Soft Function Change New System -p [ -n systemname ]
[ -a ] [ -r ] [ -f schedulefile ] [ -n systemname ] [device ]
sfcreboot Soft Function Change Reboot
sfcstart Soft Function Change Start -p [ -n systemname]
[ -r] [ -f schedulefile] [ -n systemname] [device]
sfcsudo Soft Function Change Set user [argument ...]
sll System Log Listing [ -t start_time ] [ -x stop_time -p] [ -e class] [ -r
processName] [ -s perceivedSeverity ] [ -v] [ -o
objectClassOfReference] [ -c objectClassOfReference] [ -
b probableCause] [ -f specificProblem]
spchange Site Parameter Change [ -h]
[ -help]
[ -dis]
[ -display]
[ -lmhosts]
[ -f] [ -nr] [ -n node_name] [ -ip node_ip-address ]
[ -d domain_name] [ -s subnet_mask]
[ -g default_gateway_ ip-address] [ -cn cluster_name]
[ -cip cluster_ip-address]
[ -force] [ -norestart] [ -nodename node_name ]
[ -nodeip node_ip-address] [ -domain domain_name]
[ -subnet subnet_mask]
[ -gateway default_gateway_ip-address]
[ -clusname cluster_name] [ -clusip cluster_ip-address]
stmcc Statistics and Traffic -i -e
Measurement, Counter Collection
stmdbrt Statistics and Traffic -p -t time
Measurement, Database
Retainment Time

Command Survey WCDMA CN 2.0 / GSM R9.1 Switzerland EAS/G-02-9013 Rev. I APG-8
 Mobile Training

stmfo Statistics and Traffic -c jobnumber

Measurement, File Output -i [ -z outputFormat] [ -d dirname] [ -t gohDestination] [ -a]
[ -p period] [ -u] -b begintime -s stoptime -o
-i [ -z outputFormat] [ -d dirname] [ -t gohDestination] [ -a]
[ -p period] [ -u] -b begintime -s stoptime objecttype ...
-i -z outputFormat [ -d dirname] [ -t gohDestination]
[ -f format] -r
-i -z outputFormat [ -d dirname] [ -t gohDestination]
[ -f format] [ -r] -e [ -u] -b begintime -s stoptime
-i -z outputFormat [ -d dirname] [ -t gohDestination]
[ -f format] [ -r] [ -e] [ -a] [ -p period] [ -u]
-b begintime -s stoptime -o
-i -z outputFormat [ -d dirname] [ -t gohDestination]
[ -f format] [ -r] [ -e] [ -a] [ -p period] [ -u]
-b begintime -s stoptime object_type ...
-i [ -z outputFormat] [ -d dirname] [ -t gohDestination] [ -a]
[ -p period] [ -u] -b begintime -s stoptime -o
-i [ -z outputFormat] [ -d dirname] [ -t gohDestination] [ -a]
[ -p period] [ -u] -b begintime -s stoptime objecttype ...
-i [ -z outputFormat] [ -d dirname] [ -t gohDestination]
[ -f format] -r
-i [ -z outputFormat] [ -d dirname] [ -t gohDestination]
[ -f format] [ -r] -e [ -u] -b begintime -s stoptime
-i [ -z outputFormat] [ -d dirname] [ -t gohDestination]
[ -f format] [ -r] [ -e] [ -a] [ -p period] [ -u]
-b begintime -s stoptime -o
-i [ -z outputFormat] [ -d dirname] [ -t gohDestination]
[ -f format] [ -r] [ -e] [ -a] [ -p period] [ -u]
-b begintime -s stoptime object_type ...
stmfols Statistics and Traffic
Measurement, Output Requests
List
stmmp Statistics and Traffic [ -z ASN.1 ] [ -n name] [ -p period] [ -b begintime]
Measurement, Measuring Program [ -s stoptime | -c repeats] [ -t gohDestination] [ -a]
[ -u] interval reportID
-z LF [ -n name] [ -p period] [ -b begintime] [ -s stoptime
| -c repeats ] [ -t gohDestination] [ -f format] [ -r] [ -e]
[ -a] [ -u] interval reportID
[ -z LF ] [ -n name] [ -p period] [ -b begintime] [ -s stoptime
| -c repeats ] [ -t gohDestination] [ -f format] [ -r | e] [ -a]
[ -u] interval reportID
[ -z ASN.1] [ -n name] [ -p period] [ -b begintime]
[ -s stoptime | -c repeats ] [ -t gohDestination] [ -a]
[ -u] interval reportID
-S (programID | ALL)
-R (programID | ALL)
-D programID
-L [ -l] [reportID]

Command Survey WCDMA CN 2.0 / GSM R9.1 Switzerland EAS/G-02-9013 Rev. I APG-9
 Mobile Training

stmotd Statistics and Traffic -i -e –q

Measurement, Object Type -a -n objecttype ...
Configuration
-b BRP objecttype ...
-p PRIORITY objecttype ...
stmotls Statistics and Traffic [ -c] [ -l] [objecttype ...]
Measurement, Configuration and
Status, List
stmrp Statistics and Traffic name object_type [object_type ...]
Measurement, Report -D reportID
-L [ -l] [reportID]
-C reportID [ -n name]
-M reportID -n name [[-r] object_type ...]
-M reportID [ -n name] [-r] object_type ...
stmttu Statistics and Traffic
Measurement, Translation Tables
Update
swlist Software List [ -m] [Application]
swManage Software Manage -ah Hostname IP-address
-as Servicename Protocol
-rh Hostname
-rs Servicename Protocol
-s
swrprint Software Records, Print [ -l] [ -c category] [ package ...]
[ -p] [ -c category] [ package ...]
swrprod Software Records, Specify, [ -n productname identity revision]
Change and Retrieve Third Party [ -r productname identity revision]
Products Identity
swrsid Software Records, Change or [ -h]
Retrieve the Name of AP System [ -n newsystem ]
[ -r]
trainit Initialize Memory for ACS Trace [ -s size]
Function
trautil Operators Interface to the ACS [ -l] [ -dc]
Trace Function [ -m memory_size]
[ -o ON_or_OFF]
tzls Time Zone List [ -a]
[ -a] -t min
[ -a] [ -t min] -d bis
UserDump User Information [ -e [file name] ] [ -t]
vdcreate Virtual Directory Create -n ServerName -a AliasName -d PhysicalPath
vdls Virtual Directory List -n ServerName
vdrm Virtual Directory Remove -n ServerName -a AliasName

Command Survey WCDMA CN 2.0 / GSM R9.1 Switzerland EAS/G-02-9013 Rev. I APG-10